From: Hal Feng <hal.feng@starfivetech.com>
To: "Conor Dooley" <conor+dt@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Paul Walmsley" <pjw@kernel.org>,
"Albert Ou" <aou@eecs.berkeley.edu>,
"Rafael J . Wysocki" <rafael@kernel.org>,
"Viresh Kumar" <viresh.kumar@linaro.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
"Heinrich Schuchardt" <heinrich.schuchardt@canonical.com>,
"E Shattow" <e@freeshell.de>
Cc: Hal Feng <hal.feng@starfivetech.com>,
devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 4/5] riscv: dts: starfive: Add VisionFive 2 Lite board device tree
Date: Thu, 20 Nov 2025 16:29:45 +0800 [thread overview]
Message-ID: <20251120082946.109378-5-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20251120082946.109378-1-hal.feng@starfivetech.com>
VisionFive 2 Lite is a mini SBC based on the StarFive JH7110S SoC.
Board features:
- JH7110S SoC
- 4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 1x USB 3.0 host port
- 3x USB 2.0 host port
- 1x M.2 M-Key (size: 2242)
- 1x MicroSD slot (optional non-removable 64GiB eMMC)
- 1x QSPI Flash
- 1x I2C EEPROM
- 1x 1Gbps Ethernet port
- SDIO-based Wi-Fi & UART-based Bluetooth
- 1x HDMI port
- 1x 2-lane DSI
- 1x 2-lane CSI
VisionFive 2 Lite schematics: https://doc-en.rvspace.org/VisionFive2Lite/PDF/VF2_LITE_V1.10_TF_20250818_SCH.pdf
VisionFive 2 Lite Quick Start Guide: https://doc-en.rvspace.org/VisionFive2Lite/VisionFive2LiteQSG/index.html
More documents: https://doc-en.rvspace.org/Doc_Center/visionfive_2_lite.html
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
arch/riscv/boot/dts/starfive/Makefile | 2 ++
.../jh7110s-starfive-visionfive-2-lite.dts | 20 +++++++++++++++++++
2 files changed, 22 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index 62b659f89ba7..f53109253d41 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -15,3 +15,5 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-lite.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-pine64-star64.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
+
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110s-starfive-visionfive-2-lite.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts b/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts
new file mode 100644
index 000000000000..ac5e66027bad
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 StarFive Technology Co., Ltd.
+ * Copyright (C) 2025 Hal Feng <hal.feng@starfivetech.com>
+ */
+
+/dts-v1/;
+#include "jh7110s-starfive-visionfive-2-lite.dtsi"
+
+/ {
+ model = "StarFive VisionFive 2 Lite";
+ compatible = "starfive,visionfive-2-lite", "starfive,jh7110s";
+};
+
+&mmc0 {
+ bus-width = <4>;
+ cd-gpios = <&sysgpio 41 GPIO_ACTIVE_HIGH>;
+ disable-wp;
+ cap-sd-highspeed;
+};
--
2.43.2
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: Hal Feng <hal.feng@starfivetech.com>
To: "Conor Dooley" <conor+dt@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Paul Walmsley" <pjw@kernel.org>,
"Albert Ou" <aou@eecs.berkeley.edu>,
"Rafael J . Wysocki" <rafael@kernel.org>,
"Viresh Kumar" <viresh.kumar@linaro.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
"Heinrich Schuchardt" <heinrich.schuchardt@canonical.com>,
"E Shattow" <e@freeshell.de>
Cc: Hal Feng <hal.feng@starfivetech.com>,
devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 4/5] riscv: dts: starfive: Add VisionFive 2 Lite board device tree
Date: Thu, 20 Nov 2025 16:29:45 +0800 [thread overview]
Message-ID: <20251120082946.109378-5-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20251120082946.109378-1-hal.feng@starfivetech.com>
VisionFive 2 Lite is a mini SBC based on the StarFive JH7110S SoC.
Board features:
- JH7110S SoC
- 4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 1x USB 3.0 host port
- 3x USB 2.0 host port
- 1x M.2 M-Key (size: 2242)
- 1x MicroSD slot (optional non-removable 64GiB eMMC)
- 1x QSPI Flash
- 1x I2C EEPROM
- 1x 1Gbps Ethernet port
- SDIO-based Wi-Fi & UART-based Bluetooth
- 1x HDMI port
- 1x 2-lane DSI
- 1x 2-lane CSI
VisionFive 2 Lite schematics: https://doc-en.rvspace.org/VisionFive2Lite/PDF/VF2_LITE_V1.10_TF_20250818_SCH.pdf
VisionFive 2 Lite Quick Start Guide: https://doc-en.rvspace.org/VisionFive2Lite/VisionFive2LiteQSG/index.html
More documents: https://doc-en.rvspace.org/Doc_Center/visionfive_2_lite.html
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
arch/riscv/boot/dts/starfive/Makefile | 2 ++
.../jh7110s-starfive-visionfive-2-lite.dts | 20 +++++++++++++++++++
2 files changed, 22 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index 62b659f89ba7..f53109253d41 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -15,3 +15,5 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-lite.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-pine64-star64.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
+
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110s-starfive-visionfive-2-lite.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts b/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts
new file mode 100644
index 000000000000..ac5e66027bad
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 StarFive Technology Co., Ltd.
+ * Copyright (C) 2025 Hal Feng <hal.feng@starfivetech.com>
+ */
+
+/dts-v1/;
+#include "jh7110s-starfive-visionfive-2-lite.dtsi"
+
+/ {
+ model = "StarFive VisionFive 2 Lite";
+ compatible = "starfive,visionfive-2-lite", "starfive,jh7110s";
+};
+
+&mmc0 {
+ bus-width = <4>;
+ cd-gpios = <&sysgpio 41 GPIO_ACTIVE_HIGH>;
+ disable-wp;
+ cap-sd-highspeed;
+};
--
2.43.2
next prev parent reply other threads:[~2025-11-20 8:30 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-20 8:29 [PATCH v3 0/5] Add support for StarFive VisionFive 2 Lite board Hal Feng
2025-11-20 8:29 ` Hal Feng
2025-11-20 8:29 ` [PATCH v3 1/5] dt-bindings: PCI: starfive,jh7110-pcie: Add enable-gpios property Hal Feng
2025-11-20 8:29 ` Hal Feng
2025-11-20 12:52 ` Manivannan Sadhasivam
2025-11-20 12:52 ` Manivannan Sadhasivam
2025-11-21 4:23 ` Hal Feng
2025-11-21 4:23 ` Hal Feng
2025-11-23 14:33 ` Krzysztof Kozlowski
2025-11-23 14:33 ` Krzysztof Kozlowski
2025-11-20 8:29 ` [PATCH v3 2/5] dt-bindings: riscv: Add StarFive JH7110S SoC and VisionFive 2 Lite board Hal Feng
2025-11-20 8:29 ` Hal Feng
2025-11-20 16:24 ` Rob Herring (Arm)
2025-11-20 16:24 ` Rob Herring (Arm)
2025-11-20 8:29 ` [PATCH v3 3/5] riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants Hal Feng
2025-11-20 8:29 ` Hal Feng
2025-11-21 11:51 ` Emil Renner Berthing
2025-11-21 11:51 ` Emil Renner Berthing
2025-11-22 3:30 ` E Shattow
2025-11-22 3:30 ` E Shattow
2025-11-25 9:54 ` Hal Feng
2025-11-25 9:54 ` Hal Feng
2025-11-20 8:29 ` Hal Feng [this message]
2025-11-20 8:29 ` [PATCH v3 4/5] riscv: dts: starfive: Add VisionFive 2 Lite board device tree Hal Feng
2025-11-21 11:51 ` Emil Renner Berthing
2025-11-21 11:51 ` Emil Renner Berthing
2025-11-20 8:29 ` [PATCH v3 5/5] riscv: dts: starfive: Add VisionFive 2 Lite eMMC " Hal Feng
2025-11-20 8:29 ` Hal Feng
2025-11-21 11:52 ` Emil Renner Berthing
2025-11-21 11:52 ` Emil Renner Berthing
2025-11-21 18:23 ` [PATCH v3 0/5] Add support for StarFive VisionFive 2 Lite board Matthias Brugger
2025-11-21 18:23 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251120082946.109378-5-hal.feng@starfivetech.com \
--to=hal.feng@starfivetech.com \
--cc=aou@eecs.berkeley.edu \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=e@freeshell.de \
--cc=emil.renner.berthing@canonical.com \
--cc=heinrich.schuchardt@canonical.com \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.