From: Adrian Hunter <adrian.hunter@intel.com>
To: alexandre.belloni@bootlin.com
Cc: Frank.Li@nxp.com, Wolfram Sang <wsa+renesas@sang-engineering.com>,
Aniket <aniketmaurya@google.com>,
linux-i3c@lists.infradead.org
Subject: [PATCH V2 09/20] i3c: mipi-i3c-hci: Introduce helper to restore DAT
Date: Thu, 8 Jan 2026 10:05:47 +0200 [thread overview]
Message-ID: <20260108080558.21767-10-adrian.hunter@intel.com> (raw)
In-Reply-To: <20260108080558.21767-1-adrian.hunter@intel.com>
Add a dedicated function to restore the Device Address Table (DAT) in
preparation for Runtime PM support. This will allow reprogramming the DAT
after the controller resumes from a low-power state.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
Changes in V2:
Add Frank's Rev'd-by
drivers/i3c/master/mipi-i3c-hci/dat.h | 1 +
drivers/i3c/master/mipi-i3c-hci/dat_v1.c | 9 +++++++++
2 files changed, 10 insertions(+)
diff --git a/drivers/i3c/master/mipi-i3c-hci/dat.h b/drivers/i3c/master/mipi-i3c-hci/dat.h
index 5277c65fc601..6881f19da77f 100644
--- a/drivers/i3c/master/mipi-i3c-hci/dat.h
+++ b/drivers/i3c/master/mipi-i3c-hci/dat.h
@@ -24,6 +24,7 @@ struct hci_dat_ops {
void (*set_flags)(struct i3c_hci *hci, unsigned int dat_idx, u32 w0, u32 w1);
void (*clear_flags)(struct i3c_hci *hci, unsigned int dat_idx, u32 w0, u32 w1);
int (*get_index)(struct i3c_hci *hci, u8 address);
+ void (*restore)(struct i3c_hci *hci);
};
extern const struct hci_dat_ops mipi_i3c_hci_dat_v1;
diff --git a/drivers/i3c/master/mipi-i3c-hci/dat_v1.c b/drivers/i3c/master/mipi-i3c-hci/dat_v1.c
index 644ab939be1c..852966aa20d9 100644
--- a/drivers/i3c/master/mipi-i3c-hci/dat_v1.c
+++ b/drivers/i3c/master/mipi-i3c-hci/dat_v1.c
@@ -181,6 +181,14 @@ static int hci_dat_v1_get_index(struct i3c_hci *hci, u8 dev_addr)
return -ENODEV;
}
+static void hci_dat_v1_restore(struct i3c_hci *hci)
+{
+ for (int i = 0; i < hci->DAT_entries; i++) {
+ writel(hci->DAT[i].w0, hci->DAT_regs + i * 8);
+ writel(hci->DAT[i].w1, hci->DAT_regs + i * 8 + 4);
+ }
+}
+
const struct hci_dat_ops mipi_i3c_hci_dat_v1 = {
.init = hci_dat_v1_init,
.alloc_entry = hci_dat_v1_alloc_entry,
@@ -190,4 +198,5 @@ const struct hci_dat_ops mipi_i3c_hci_dat_v1 = {
.set_flags = hci_dat_v1_set_flags,
.clear_flags = hci_dat_v1_clear_flags,
.get_index = hci_dat_v1_get_index,
+ .restore = hci_dat_v1_restore,
};
--
2.51.0
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2026-01-08 8:06 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-08 8:05 [PATCH V2 00/20] i3c: mipi-i3c-hci-pci: Add Runtime PM support Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 01/20] i3c: mipi-i3c-hci: Reset RING_OPERATION1 fields during init Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 02/20] i3c: mipi-i3c-hci: Ensure proper bus clean-up Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 03/20] i3c: master: Update hot-join flag only on success Adrian Hunter
2026-01-08 14:52 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 04/20] i3c: master: Replace WARN_ON() with dev_err() in i3c_dev_free_ibi_locked() Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 05/20] i3c: mipi-i3c-hci: Switch DAT bitmap allocation to devm_bitmap_zalloc() Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 06/20] i3c: mipi-i3c-hci: Switch PIO data allocation to devm_kzalloc() Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 07/20] i3c: mipi-i3c-hci: Manage DMA deallocation via devres action Adrian Hunter
2026-01-08 14:56 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 08/20] i3c: mipi-i3c-hci: Cache DAT in memory for Runtime PM restore Adrian Hunter
2026-01-08 8:05 ` Adrian Hunter [this message]
2026-01-08 8:05 ` [PATCH V2 10/20] i3c: mipi-i3c-hci: Extract ring initialization from hci_dma_init() Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 11/20] i3c: mipi-i3c-hci: Add DMA suspend and resume support Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 12/20] i3c: mipi-i3c-hci: Refactor PIO register initialization Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 13/20] i3c: mipi-i3c-hci: Add PIO suspend and resume support Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 14/20] i3c: mipi-i3c-hci: Factor out software reset into helper Adrian Hunter
2026-01-08 14:57 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 15/20] i3c: mipi-i3c-hci: Factor out IO mode setting " Adrian Hunter
2026-01-08 15:03 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 16/20] i3c: mipi-i3c-hci: Factor out core initialization " Adrian Hunter
2026-01-08 15:25 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 17/20] i3c: mipi-i3c-hci: Factor out master dynamic address setting " Adrian Hunter
2026-01-08 15:28 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 18/20] i3c: master: Introduce optional Runtime PM support Adrian Hunter
2026-01-08 15:09 ` Frank Li
2026-01-09 11:42 ` Adrian Hunter
2026-01-12 16:04 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 19/20] i3c: mipi-i3c-hci: Add " Adrian Hunter
2026-01-08 15:15 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 20/20] i3c: mipi-i3c-hci-pci: Add " Adrian Hunter
2026-01-08 15:17 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260108080558.21767-10-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=aniketmaurya@google.com \
--cc=linux-i3c@lists.infradead.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.