All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: alexandre.belloni@bootlin.com
Cc: Frank.Li@nxp.com, Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Aniket <aniketmaurya@google.com>,
	linux-i3c@lists.infradead.org
Subject: [PATCH V2 11/20] i3c: mipi-i3c-hci: Add DMA suspend and resume support
Date: Thu,  8 Jan 2026 10:05:49 +0200	[thread overview]
Message-ID: <20260108080558.21767-12-adrian.hunter@intel.com> (raw)
In-Reply-To: <20260108080558.21767-1-adrian.hunter@intel.com>

Introduce helper functions to suspend and resume DMA operations.  These
are required to prepare for upcoming Runtime PM support, ensuring that
DMA state is properly managed during power transitions.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---


Changes in V2:

	Add Frank's Rev'd-by


 drivers/i3c/master/mipi-i3c-hci/dma.c | 25 +++++++++++++++++++++++++
 drivers/i3c/master/mipi-i3c-hci/hci.h |  2 ++
 2 files changed, 27 insertions(+)

diff --git a/drivers/i3c/master/mipi-i3c-hci/dma.c b/drivers/i3c/master/mipi-i3c-hci/dma.c
index 9ed69da52977..2e5b4974d431 100644
--- a/drivers/i3c/master/mipi-i3c-hci/dma.c
+++ b/drivers/i3c/master/mipi-i3c-hci/dma.c
@@ -275,6 +275,29 @@ static void hci_dma_init_rings(struct i3c_hci *hci)
 		hci_dma_init_rh(hci, &rings->headers[i], i);
 }
 
+static void hci_dma_suspend(struct i3c_hci *hci)
+{
+	struct hci_rings_data *rings = hci->io_data;
+	int n = rings ? rings->total : 0;
+
+	for (int i = 0; i < n; i++) {
+		struct hci_rh_data *rh = &rings->headers[i];
+
+		rh_reg_write(INTR_SIGNAL_ENABLE, 0);
+		rh_reg_write(RING_CONTROL, 0);
+	}
+
+	i3c_hci_sync_irq_inactive(hci);
+}
+
+static void hci_dma_resume(struct i3c_hci *hci)
+{
+	struct hci_rings_data *rings = hci->io_data;
+
+	if (rings)
+		hci_dma_init_rings(hci);
+}
+
 static int hci_dma_init(struct i3c_hci *hci)
 {
 	struct hci_rings_data *rings;
@@ -865,4 +888,6 @@ const struct hci_io_ops mipi_i3c_hci_dma = {
 	.request_ibi		= hci_dma_request_ibi,
 	.free_ibi		= hci_dma_free_ibi,
 	.recycle_ibi_slot	= hci_dma_recycle_ibi_slot,
+	.suspend		= hci_dma_suspend,
+	.resume			= hci_dma_resume,
 };
diff --git a/drivers/i3c/master/mipi-i3c-hci/hci.h b/drivers/i3c/master/mipi-i3c-hci/hci.h
index aa8a03594e64..38f927685d3b 100644
--- a/drivers/i3c/master/mipi-i3c-hci/hci.h
+++ b/drivers/i3c/master/mipi-i3c-hci/hci.h
@@ -125,6 +125,8 @@ struct hci_io_ops {
 				struct i3c_ibi_slot *slot);
 	int (*init)(struct i3c_hci *hci);
 	void (*cleanup)(struct i3c_hci *hci);
+	void (*suspend)(struct i3c_hci *hci);
+	void (*resume)(struct i3c_hci *hci);
 };
 
 extern const struct hci_io_ops mipi_i3c_hci_pio;
-- 
2.51.0


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

  parent reply	other threads:[~2026-01-08  8:06 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-08  8:05 [PATCH V2 00/20] i3c: mipi-i3c-hci-pci: Add Runtime PM support Adrian Hunter
2026-01-08  8:05 ` [PATCH V2 01/20] i3c: mipi-i3c-hci: Reset RING_OPERATION1 fields during init Adrian Hunter
2026-01-08  8:05 ` [PATCH V2 02/20] i3c: mipi-i3c-hci: Ensure proper bus clean-up Adrian Hunter
2026-01-08  8:05 ` [PATCH V2 03/20] i3c: master: Update hot-join flag only on success Adrian Hunter
2026-01-08 14:52   ` Frank Li
2026-01-08  8:05 ` [PATCH V2 04/20] i3c: master: Replace WARN_ON() with dev_err() in i3c_dev_free_ibi_locked() Adrian Hunter
2026-01-08  8:05 ` [PATCH V2 05/20] i3c: mipi-i3c-hci: Switch DAT bitmap allocation to devm_bitmap_zalloc() Adrian Hunter
2026-01-08  8:05 ` [PATCH V2 06/20] i3c: mipi-i3c-hci: Switch PIO data allocation to devm_kzalloc() Adrian Hunter
2026-01-08  8:05 ` [PATCH V2 07/20] i3c: mipi-i3c-hci: Manage DMA deallocation via devres action Adrian Hunter
2026-01-08 14:56   ` Frank Li
2026-01-08  8:05 ` [PATCH V2 08/20] i3c: mipi-i3c-hci: Cache DAT in memory for Runtime PM restore Adrian Hunter
2026-01-08  8:05 ` [PATCH V2 09/20] i3c: mipi-i3c-hci: Introduce helper to restore DAT Adrian Hunter
2026-01-08  8:05 ` [PATCH V2 10/20] i3c: mipi-i3c-hci: Extract ring initialization from hci_dma_init() Adrian Hunter
2026-01-08  8:05 ` Adrian Hunter [this message]
2026-01-08  8:05 ` [PATCH V2 12/20] i3c: mipi-i3c-hci: Refactor PIO register initialization Adrian Hunter
2026-01-08  8:05 ` [PATCH V2 13/20] i3c: mipi-i3c-hci: Add PIO suspend and resume support Adrian Hunter
2026-01-08  8:05 ` [PATCH V2 14/20] i3c: mipi-i3c-hci: Factor out software reset into helper Adrian Hunter
2026-01-08 14:57   ` Frank Li
2026-01-08  8:05 ` [PATCH V2 15/20] i3c: mipi-i3c-hci: Factor out IO mode setting " Adrian Hunter
2026-01-08 15:03   ` Frank Li
2026-01-08  8:05 ` [PATCH V2 16/20] i3c: mipi-i3c-hci: Factor out core initialization " Adrian Hunter
2026-01-08 15:25   ` Frank Li
2026-01-08  8:05 ` [PATCH V2 17/20] i3c: mipi-i3c-hci: Factor out master dynamic address setting " Adrian Hunter
2026-01-08 15:28   ` Frank Li
2026-01-08  8:05 ` [PATCH V2 18/20] i3c: master: Introduce optional Runtime PM support Adrian Hunter
2026-01-08 15:09   ` Frank Li
2026-01-09 11:42     ` Adrian Hunter
2026-01-12 16:04       ` Frank Li
2026-01-08  8:05 ` [PATCH V2 19/20] i3c: mipi-i3c-hci: Add " Adrian Hunter
2026-01-08 15:15   ` Frank Li
2026-01-08  8:05 ` [PATCH V2 20/20] i3c: mipi-i3c-hci-pci: Add " Adrian Hunter
2026-01-08 15:17   ` Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260108080558.21767-12-adrian.hunter@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=Frank.Li@nxp.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=aniketmaurya@google.com \
    --cc=linux-i3c@lists.infradead.org \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.