From: Adrian Hunter <adrian.hunter@intel.com>
To: alexandre.belloni@bootlin.com
Cc: Frank.Li@nxp.com, Wolfram Sang <wsa+renesas@sang-engineering.com>,
Aniket <aniketmaurya@google.com>,
linux-i3c@lists.infradead.org
Subject: [PATCH V2 07/20] i3c: mipi-i3c-hci: Manage DMA deallocation via devres action
Date: Thu, 8 Jan 2026 10:05:45 +0200 [thread overview]
Message-ID: <20260108080558.21767-8-adrian.hunter@intel.com> (raw)
In-Reply-To: <20260108080558.21767-1-adrian.hunter@intel.com>
The driver already uses devres for resource management, but the standard
resource-managed DMA allocation helpers cannot be used because they assume
the DMA device matches the managed device.
To address this, factor out the deallocation logic from hci_dma_cleanup()
into a new helper, hci_dma_free(), and register it as a devres action.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
Changes in V2:
Move hci_dma_free() below hci_dma_cleanup() to make patch look
better to review
Frank suggested using devm_add_action_and_reset() but it doesn't
work because the error path needs to call hci_dma_cleanup() before
hci_dma_free
drivers/i3c/master/mipi-i3c-hci/dma.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/i3c/master/mipi-i3c-hci/dma.c b/drivers/i3c/master/mipi-i3c-hci/dma.c
index 54849aa98fad..4999cf3d9674 100644
--- a/drivers/i3c/master/mipi-i3c-hci/dma.c
+++ b/drivers/i3c/master/mipi-i3c-hci/dma.c
@@ -169,6 +169,22 @@ static void hci_dma_cleanup(struct i3c_hci *hci)
rh_reg_write(CR_SETUP, 0);
rh_reg_write(IBI_SETUP, 0);
+ }
+
+ rhs_reg_write(CONTROL, 0);
+}
+
+static void hci_dma_free(void *data)
+{
+ struct i3c_hci *hci = data;
+ struct hci_rings_data *rings = hci->io_data;
+ struct hci_rh_data *rh;
+
+ if (!rings)
+ return;
+
+ for (int i = 0; i < rings->total; i++) {
+ rh = &rings->headers[i];
if (rh->xfer)
dma_free_coherent(rings->sysdev,
@@ -190,8 +206,6 @@ static void hci_dma_cleanup(struct i3c_hci *hci)
kfree(rh->ibi_data);
}
- rhs_reg_write(CONTROL, 0);
-
kfree(rings);
hci->io_data = NULL;
}
@@ -359,10 +373,15 @@ static int hci_dma_init(struct i3c_hci *hci)
RING_CTRL_RUN_STOP);
}
+ ret = devm_add_action(hci->master.dev.parent, hci_dma_free, hci);
+ if (ret)
+ goto err_out;
+
return 0;
err_out:
hci_dma_cleanup(hci);
+ hci_dma_free(hci);
return ret;
}
--
2.51.0
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2026-01-08 8:06 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-08 8:05 [PATCH V2 00/20] i3c: mipi-i3c-hci-pci: Add Runtime PM support Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 01/20] i3c: mipi-i3c-hci: Reset RING_OPERATION1 fields during init Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 02/20] i3c: mipi-i3c-hci: Ensure proper bus clean-up Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 03/20] i3c: master: Update hot-join flag only on success Adrian Hunter
2026-01-08 14:52 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 04/20] i3c: master: Replace WARN_ON() with dev_err() in i3c_dev_free_ibi_locked() Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 05/20] i3c: mipi-i3c-hci: Switch DAT bitmap allocation to devm_bitmap_zalloc() Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 06/20] i3c: mipi-i3c-hci: Switch PIO data allocation to devm_kzalloc() Adrian Hunter
2026-01-08 8:05 ` Adrian Hunter [this message]
2026-01-08 14:56 ` [PATCH V2 07/20] i3c: mipi-i3c-hci: Manage DMA deallocation via devres action Frank Li
2026-01-08 8:05 ` [PATCH V2 08/20] i3c: mipi-i3c-hci: Cache DAT in memory for Runtime PM restore Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 09/20] i3c: mipi-i3c-hci: Introduce helper to restore DAT Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 10/20] i3c: mipi-i3c-hci: Extract ring initialization from hci_dma_init() Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 11/20] i3c: mipi-i3c-hci: Add DMA suspend and resume support Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 12/20] i3c: mipi-i3c-hci: Refactor PIO register initialization Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 13/20] i3c: mipi-i3c-hci: Add PIO suspend and resume support Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 14/20] i3c: mipi-i3c-hci: Factor out software reset into helper Adrian Hunter
2026-01-08 14:57 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 15/20] i3c: mipi-i3c-hci: Factor out IO mode setting " Adrian Hunter
2026-01-08 15:03 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 16/20] i3c: mipi-i3c-hci: Factor out core initialization " Adrian Hunter
2026-01-08 15:25 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 17/20] i3c: mipi-i3c-hci: Factor out master dynamic address setting " Adrian Hunter
2026-01-08 15:28 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 18/20] i3c: master: Introduce optional Runtime PM support Adrian Hunter
2026-01-08 15:09 ` Frank Li
2026-01-09 11:42 ` Adrian Hunter
2026-01-12 16:04 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 19/20] i3c: mipi-i3c-hci: Add " Adrian Hunter
2026-01-08 15:15 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 20/20] i3c: mipi-i3c-hci-pci: Add " Adrian Hunter
2026-01-08 15:17 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260108080558.21767-8-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=aniketmaurya@google.com \
--cc=linux-i3c@lists.infradead.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.