All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 05/28] qemu-options: Improve description for -smb option
Date: Fri,  1 May 2026 11:14:42 +0100	[thread overview]
Message-ID: <20260501101505.3485916-6-peter.maydell@linaro.org> (raw)
In-Reply-To: <20260501101505.3485916-1-peter.maydell@linaro.org>

From: Pali Rohár <pali@kernel.org>

Add #PRE and #NOFNR flags to LMHOSTS example line.
Include information about LMHOSTS path on Windows 3.x.

Windows NT 3.1 requires #NOFNR flag for successful hostname resolving as
described in MS article Q103765 because qemu/smbd does not respond to
netbios name verification queries. #PRE is suggested in that article too
and decrease delay on Windows 3.x for the first connection.

Signed-off-by: Pali Rohár <pali@kernel.org>
[PMM: Expand documentation to note what these flags do, and
 clarify Windows LMHOSTS paths for different Windows versions,
 based on discussion in patch review, fix existing grammar nit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 qemu-options.hx | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/qemu-options.hx b/qemu-options.hx
index e780bc2ac0..98e39a1ad4 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -3415,7 +3415,7 @@ SRST
 
     ``smb=dir[,smbserver=addr]``
         When using the user mode network stack, activate a built-in SMB
-        server so that Windows OSes can access to the host files in
+        server so that Windows OSes can access the host files in
         ``dir`` transparently. The IP address of the SMB server can be
         set to addr. By default the 4th IP in the guest network is used,
         i.e. x.x.x.4.
@@ -3424,11 +3424,20 @@ SRST
 
         ::
 
-            10.0.2.4 smbserver
+            10.0.2.4 smbserver #PRE #NOFNR
 
-        must be added in the file ``C:\WINDOWS\LMHOSTS`` (for windows
-        9x/Me) or ``C:\WINNT\SYSTEM32\DRIVERS\ETC\LMHOSTS`` (Windows
-        NT/2000).
+        must be added in the ``LMHOSTS`` file. In this line, ``#PRE``
+        requests pre-caching of the mapping, which speeds up the initial
+        connection on some Windows versions. ``#NOFNR`` is necessary for
+        Windows NT 3.1 to tell it not to send QEMU NBNS query packets that
+        QEMU does not handle, and is harmlessly ignored on other versions.
+
+        The ``LMHOSTS`` file may be in different locations depending on
+        the Windows version:
+
+        -  ``C:\WINDOWS\LMHOSTS`` for Windows 3x/9x/Me
+        -  ``C:\WINNT\SYSTEM32\DRIVERS\ETC\LMHOSTS`` for Windows NT/2000
+        -  ``C:\WINDOWS\SYSTEM32\DRIVERS\ETC\LMHOSTS`` for Windows XP and newer
 
         Then ``dir`` can be accessed in ``\\smbserver\qemu``.
 
-- 
2.43.0



  parent reply	other threads:[~2026-05-01 10:16 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-01 10:14 [PULL 00/28] target-arm queue Peter Maydell
2026-05-01 10:14 ` [PULL 01/28] hw/arm/fsl-imx8mp: Do not create redundant unimplemented devices Peter Maydell
2026-05-01 10:14 ` [PULL 02/28] hw/arm/fsl-imx8mp: Fix parent of ocram memory region Peter Maydell
2026-05-01 10:14 ` [PULL 03/28] Revert "sysbus: add irq_routing_notifier" Peter Maydell
2026-05-01 10:14 ` [PULL 04/28] linux-user/arm: Restrict regpairs_aligned Peter Maydell
2026-05-01 10:14 ` Peter Maydell [this message]
2026-05-01 10:14 ` [PULL 06/28] target/arm/cpu-features.c: New fields in AA64MMFR4 Peter Maydell
2026-05-01 10:14 ` [PULL 07/28] target/arm/cpu.h: New GPCCR fields Peter Maydell
2026-05-01 10:14 ` [PULL 08/28] target/arm/ptw.c: Add GDI spaces to the granule protection case Peter Maydell
2026-05-01 10:14 ` [PULL 09/28] tests/tcg/aarch64/system/rme_gdi.c: Very basic test of GDI Peter Maydell
2026-05-01 10:14 ` [PULL 10/28] docs/devel/decodetree: Fix formatting in "field examples" table Peter Maydell
2026-05-01 10:14 ` [PULL 11/28] hw/net/allwinner-sun8i-emac: Flush queued packets when rx is enabled Peter Maydell
2026-05-01 10:14 ` [PULL 12/28] hw/intc/arm_gicv3: Fix NS write to ICC_AP1Rn_EL1 when prebits < 7 Peter Maydell
2026-05-01 10:14 ` [PULL 13/28] target/arm/kvm: Cache host CPU probe failure Peter Maydell
2026-05-01 10:14 ` [PULL 14/28] hw/intc: Add hvf vGIC interrupt controller support Peter Maydell
2026-05-01 10:14 ` [PULL 15/28] hw/intc: arm_gicv3_hvf: save/restore Apple GIC state Peter Maydell
2026-05-07  8:08   ` Philippe Mathieu-Daudé
2026-06-13 11:45   ` Philippe Mathieu-Daudé
2026-06-13 11:49     ` Mohamed Mediouni
2026-05-01 10:14 ` [PULL 16/28] accel, hw/arm, include/system/hvf: infrastructure changes for HVF vGIC Peter Maydell
2026-05-01 10:14 ` [PULL 17/28] target/arm: hvf: instantiate GIC early Peter Maydell
2026-05-01 10:14 ` [PULL 18/28] hw/arm, target/arm: nested virtualisation on HVF Peter Maydell
2026-05-01 10:14 ` [PULL 19/28] hvf: only call hvf_sync_vtimer() when running without the platform vGIC Peter Maydell
2026-05-01 10:14 ` [PULL 20/28] hvf: gate ARM_FEATURE_PMU register emulation when using the Apple vGIC Peter Maydell
2026-05-01 10:14 ` [PULL 21/28] hvf: arm: allow exposing minimal PMU for kernel-irqchip=on Peter Maydell
2026-05-01 10:14 ` [PULL 22/28] target/arm: hvf: add asserts for code paths not leveraged when using the vGIC Peter Maydell
2026-05-01 10:15 ` [PULL 23/28] hvf: sync registers used at EL2 Peter Maydell
2026-05-01 10:59   ` Stefan Hajnoczi
2026-05-01 23:20     ` Mohamed Mediouni
2026-05-01 10:15 ` [PULL 24/28] target/arm: hvf: pass through CNTHCTL_EL2 and MDCCINT_EL1 Peter Maydell
2026-05-01 10:15 ` [PULL 25/28] hvf: arm: disable SME when nested virt is active Peter Maydell
2026-05-01 10:15 ` [PULL 26/28] hvf: arm: physical timer emulation Peter Maydell
2026-05-01 10:15 ` [PULL 27/28] hvf: enable nested virtualisation support Peter Maydell
2026-05-01 10:15 ` [PULL 28/28] hvf: arm: enable vGIC by default for virt-11.1 and later Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260501101505.3485916-6-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.