All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chris Morgan <macroalpha82@gmail.com>
To: linux-iio@vger.kernel.org
Cc: andy@kernel.org, nuno.sa@analog.com, dlechner@baylibre.com,
	jic23@kernel.org, jean-baptiste.maneyrol@tdk.com,
	linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
	heiko@sntech.de, conor+dt@kernel.org, krzk+dt@kernel.org,
	robh@kernel.org, andriy.shevchenko@intel.com,
	Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V10 8/9] iio: imu: inv_icm42607: Add Gyroscope to icm42607
Date: Thu,  4 Jun 2026 15:18:30 -0500	[thread overview]
Message-ID: <20260604201832.60656-9-macroalpha82@gmail.com> (raw)
In-Reply-To: <20260604201832.60656-1-macroalpha82@gmail.com>

From: Chris Morgan <macromorgan@hotmail.com>

Add gyroscope functions to the icm42607 driver.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/iio/imu/inv_icm42607/Makefile         |   1 +
 drivers/iio/imu/inv_icm42607/inv_icm42607.h   |   8 +
 .../iio/imu/inv_icm42607/inv_icm42607_core.c  |  48 ++
 .../iio/imu/inv_icm42607/inv_icm42607_gyro.c  | 437 ++++++++++++++++++
 4 files changed, 494 insertions(+)
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c

diff --git a/drivers/iio/imu/inv_icm42607/Makefile b/drivers/iio/imu/inv_icm42607/Makefile
index d74b23b1e1bec..7b907e0196017 100644
--- a/drivers/iio/imu/inv_icm42607/Makefile
+++ b/drivers/iio/imu/inv_icm42607/Makefile
@@ -2,6 +2,7 @@
 
 obj-$(CONFIG_INV_ICM42607) += inv-icm42607.o
 inv-icm42607-y += inv_icm42607_core.o
+inv-icm42607-y += inv_icm42607_gyro.o
 inv-icm42607-y += inv_icm42607_accel.o
 inv-icm42607-y += inv_icm42607_temp.o
 
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
index fb4bcc2b7da54..b2f081ec8776c 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -134,6 +134,7 @@ struct inv_icm42607_suspended {
  *  @orientation:	sensor chip orientation relative to main hardware.
  *  @conf:		chip sensors configurations.
  *  @suspended:		suspended sensors configuration.
+ *  @indio_gyro:	gyroscope IIO device.
  *  @indio_accel:	accelerometer IIO device.
  *  @buffer:		data transfer buffer aligned for DMA.
  */
@@ -146,6 +147,7 @@ struct inv_icm42607_state {
 	struct iio_mount_matrix orientation;
 	struct inv_icm42607_conf conf;
 	struct inv_icm42607_suspended suspended;
+	struct iio_dev *indio_gyro;
 	struct iio_dev *indio_accel;
 	__be16 buffer[3] __aligned(IIO_DMA_MINALIGN);
 };
@@ -401,6 +403,10 @@ int inv_icm42607_set_accel_conf(struct inv_icm42607_state *st,
 				struct inv_icm42607_sensor_conf *conf,
 				unsigned int *sleep_ms);
 
+int inv_icm42607_set_gyro_conf(struct inv_icm42607_state *st,
+			       struct inv_icm42607_sensor_conf *conf,
+			       unsigned int *sleep_ms);
+
 int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
 			       unsigned int *sleep_ms);
 
@@ -408,6 +414,8 @@ int inv_icm42607_core_probe(struct regmap *regmap,
 			    const struct inv_icm42607_hw *hw,
 			    inv_icm42607_bus_setup bus_setup);
 
+struct iio_dev *inv_icm42607_gyro_init(struct inv_icm42607_state *st);
+
 struct iio_dev *inv_icm42607_accel_init(struct inv_icm42607_state *st);
 
 #endif
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
index 5f311cba0572c..fd06ef5ab1e6f 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -206,6 +206,49 @@ int inv_icm42607_set_accel_conf(struct inv_icm42607_state *st,
 					  st->conf.temp_en, sleep_ms);
 }
 
+int inv_icm42607_set_gyro_conf(struct inv_icm42607_state *st,
+			       struct inv_icm42607_sensor_conf *conf,
+			       unsigned int *sleep_ms)
+{
+	struct inv_icm42607_sensor_conf *oldconf = &st->conf.gyro;
+	unsigned int val;
+	int ret;
+
+	if (conf->mode < 0)
+		conf->mode = oldconf->mode;
+	if (conf->fs < 0)
+		conf->fs = oldconf->fs;
+	if (conf->odr < 0)
+		conf->odr = oldconf->odr;
+	if (conf->filter < 0)
+		conf->filter = oldconf->filter;
+
+	if (conf->fs != oldconf->fs || conf->odr != oldconf->odr) {
+		val = FIELD_PREP(INV_ICM42607_GYRO_CONFIG0_FS_SEL_MASK,
+				 conf->fs);
+		val |= FIELD_PREP(INV_ICM42607_GYRO_CONFIG0_ODR_MASK,
+				  conf->odr);
+		ret = regmap_write(st->map, INV_ICM42607_REG_GYRO_CONFIG0, val);
+		if (ret)
+			return ret;
+		oldconf->fs = conf->fs;
+		oldconf->odr = conf->odr;
+	}
+
+	if (conf->filter != oldconf->filter) {
+		val = FIELD_PREP(INV_ICM42607_GYRO_CONFIG1_FILTER_MASK,
+				 conf->filter);
+		ret = regmap_update_bits(st->map, INV_ICM42607_REG_GYRO_CONFIG1,
+					 INV_ICM42607_GYRO_CONFIG1_FILTER_MASK, val);
+		if (ret)
+			return ret;
+		oldconf->filter = conf->filter;
+	}
+
+	return inv_icm42607_set_pwr_mgmt0(st, conf->mode, st->conf.accel.mode,
+					  st->conf.temp_en, sleep_ms);
+}
+
 int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
 			       unsigned int *sleep_ms)
 {
@@ -421,6 +464,11 @@ int inv_icm42607_core_probe(struct regmap *regmap,
 	if (IS_ERR(st->indio_accel))
 		return PTR_ERR(st->indio_accel);
 
+	/* Initialize IIO device for Gyro */
+	st->indio_gyro = inv_icm42607_gyro_init(st);
+	if (IS_ERR(st->indio_gyro))
+		return PTR_ERR(st->indio_gyro);
+
 	return 0;
 }
 EXPORT_SYMBOL_NS_GPL(inv_icm42607_core_probe, "IIO_ICM42607");
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
new file mode 100644
index 0000000000000..0f2703342122b
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
@@ -0,0 +1,437 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/math64.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/common/inv_sensors_timestamp.h>
+#include "inv_icm42607.h"
+#include "inv_icm42607_temp.h"
+
+#define INV_ICM42607_GYRO_CHAN(_modifier, _index, _ext_info)	\
+{								\
+	.type = IIO_ANGL_VEL,					\
+	.modified = 1,						\
+	.channel2 = _modifier,					\
+	.info_mask_separate =					\
+		BIT(IIO_CHAN_INFO_RAW),				\
+	.info_mask_shared_by_type =				\
+		BIT(IIO_CHAN_INFO_SCALE),			\
+	.info_mask_shared_by_all =				\
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),			\
+	.scan_index = _index,					\
+	.scan_type = {						\
+		.sign = 's',					\
+		.realbits = 16,					\
+		.storagebits = 16,				\
+		.endianness = IIO_BE,				\
+	},							\
+	.ext_info = _ext_info,					\
+}
+
+enum inv_icm42607_gyro_scan {
+	INV_ICM42607_GYRO_SCAN_X,
+	INV_ICM42607_GYRO_SCAN_Y,
+	INV_ICM42607_GYRO_SCAN_Z,
+	INV_ICM42607_GYRO_SCAN_TEMP,
+	INV_ICM42607_GYRO_SCAN_TIMESTAMP,
+};
+
+static const struct iio_chan_spec_ext_info inv_icm42607_gyro_ext_infos[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, inv_icm42607_get_mount_matrix),
+	{ }
+};
+
+static const struct iio_chan_spec inv_icm42607_gyro_channels[] = {
+	INV_ICM42607_GYRO_CHAN(IIO_MOD_X, INV_ICM42607_GYRO_SCAN_X,
+			       inv_icm42607_gyro_ext_infos),
+	INV_ICM42607_GYRO_CHAN(IIO_MOD_Y, INV_ICM42607_GYRO_SCAN_Y,
+			       inv_icm42607_gyro_ext_infos),
+	INV_ICM42607_GYRO_CHAN(IIO_MOD_Z, INV_ICM42607_GYRO_SCAN_Z,
+			       inv_icm42607_gyro_ext_infos),
+	INV_ICM42607_TEMP_CHAN(INV_ICM42607_GYRO_SCAN_TEMP),
+	IIO_CHAN_SOFT_TIMESTAMP(INV_ICM42607_GYRO_SCAN_TIMESTAMP),
+};
+
+#define INV_ICM42607_SCAN_MASK_GYRO_3AXIS				\
+	(BIT(INV_ICM42607_GYRO_SCAN_X) |				\
+	 BIT(INV_ICM42607_GYRO_SCAN_Y) |				\
+	 BIT(INV_ICM42607_GYRO_SCAN_Z))
+
+#define INV_ICM42607_SCAN_MASK_TEMP	BIT(INV_ICM42607_GYRO_SCAN_TEMP)
+
+static const unsigned long inv_icm42607_gyro_scan_masks[] = {
+	INV_ICM42607_SCAN_MASK_GYRO_3AXIS,
+	INV_ICM42607_SCAN_MASK_GYRO_3AXIS | INV_ICM42607_SCAN_MASK_TEMP,
+	0
+};
+
+/* enable gyroscope sensor */
+static int inv_icm42607_gyro_update_scan_mode(struct iio_dev *indio_dev,
+					      const unsigned long *scan_mask)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	unsigned int sleep_gyro = 0;
+	unsigned int sleep_temp = 0;
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	if (*scan_mask & INV_ICM42607_SCAN_MASK_TEMP) {
+		/* enable temp sensor */
+		ret = inv_icm42607_set_temp_conf(st, true, &sleep_temp);
+		if (ret)
+			goto out_unlock;
+	}
+
+	if (*scan_mask & INV_ICM42607_SCAN_MASK_GYRO_3AXIS) {
+		/* enable gyro sensor */
+		conf.mode = INV_ICM42607_SENSOR_MODE_LOW_NOISE;
+		ret = inv_icm42607_set_gyro_conf(st, &conf, &sleep_gyro);
+		if (ret)
+			goto out_unlock;
+	}
+
+out_unlock:
+	mutex_unlock(&st->lock);
+	/* sleep maximum required time */
+	msleep(max(sleep_gyro, sleep_temp));
+	return ret;
+}
+
+static int inv_icm42607_gyro_read_sensor(struct iio_dev *indio_dev,
+					 struct iio_chan_spec const *chan,
+					 s16 *val)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_icm42607_sensor_state *gyro_st = iio_priv(indio_dev);
+	struct device *dev = regmap_get_device(st->map);
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	unsigned int reg;
+	__be16 *data;
+	int ret;
+
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		reg = INV_ICM42607_REG_GYRO_DATA_X1;
+		break;
+	case IIO_MOD_Y:
+		reg = INV_ICM42607_REG_GYRO_DATA_Y1;
+		break;
+	case IIO_MOD_Z:
+		reg = INV_ICM42607_REG_GYRO_DATA_Z1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	/* enable gyro sensor */
+	conf.mode = gyro_st->power_mode;
+	ret = inv_icm42607_set_gyro_conf(st, &conf, NULL);
+	if (ret)
+		return ret;
+
+	/* read gyro register data */
+	data = &st->buffer[0];
+	ret = regmap_bulk_read(st->map, reg, data, sizeof(*data));
+	if (ret)
+		return ret;
+
+	*val = be16_to_cpup(data);
+	if (*val == INV_ICM42607_DATA_INVALID)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const int inv_icm42607_gyro_scale_nano[][2] = {
+	[INV_ICM42607_GYRO_FS_2000DPS] = { 0, 1065264 },
+	[INV_ICM42607_GYRO_FS_1000DPS] = { 0, 532632 },
+	[INV_ICM42607_GYRO_FS_500DPS] = { 0, 266316 },
+	[INV_ICM42607_GYRO_FS_250DPS] = { 0, 133158 },
+};
+
+static int inv_icm42607_gyro_read_scale(struct iio_dev *indio_dev,
+					int *val, int *val2)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	unsigned int idx;
+
+	idx = st->conf.gyro.fs;
+
+	*val = inv_icm42607_gyro_scale_nano[idx][0];
+	*val2 = inv_icm42607_gyro_scale_nano[idx][1];
+	return IIO_VAL_INT_PLUS_NANO;
+}
+
+static int inv_icm42607_gyro_write_scale(struct iio_dev *indio_dev,
+					 int val, int val2)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	struct device *dev = regmap_get_device(st->map);
+	unsigned int idx;
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	size_t scales_len = ARRAY_SIZE(inv_icm42607_gyro_scale_nano);
+	int ret;
+
+	for (idx = 0; idx < scales_len; idx++) {
+		if (val == inv_icm42607_gyro_scale_nano[idx][0] &&
+		    val2 == inv_icm42607_gyro_scale_nano[idx][1])
+			break;
+	}
+	if (idx >= scales_len)
+		return -EINVAL;
+
+	conf.fs = idx;
+
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	return inv_icm42607_set_gyro_conf(st, &conf, NULL);
+}
+
+static const int inv_icm42607_gyro_odr[][2] = {
+	[INV_ICM42607_ODR_12_5HZ] = { 12, 500000 },
+	[INV_ICM42607_ODR_25HZ] = { 25, 0 },
+	[INV_ICM42607_ODR_50HZ] = { 50, 0 },
+	[INV_ICM42607_ODR_100HZ] = { 100, 0 },
+	[INV_ICM42607_ODR_200HZ] = { 200, 0 },
+	[INV_ICM42607_ODR_400HZ] = { 400, 0 },
+	[INV_ICM42607_ODR_800HZ] = { 800, 0 },
+	[INV_ICM42607_ODR_1600HZ] = { 1600, 0 },
+};
+
+static int inv_icm42607_gyro_read_odr(struct inv_icm42607_state *st,
+				      int *val, int *val2)
+{
+	unsigned int odr;
+	unsigned int i;
+
+	odr = st->conf.gyro.odr;
+
+	for (i = 5; i < ARRAY_SIZE(inv_icm42607_gyro_odr); ++i) {
+		if (i == odr)
+			break;
+	}
+	if (i >= ARRAY_SIZE(inv_icm42607_gyro_odr))
+		return -EINVAL;
+
+	*val = inv_icm42607_gyro_odr[i][0];
+	*val2 = inv_icm42607_gyro_odr[i][1];
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int inv_icm42607_gyro_write_odr(struct iio_dev *indio_dev,
+				       int val, int val2)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_icm42607_sensor_state *gyro_st = iio_priv(indio_dev);
+	struct inv_sensors_timestamp *ts = &gyro_st->ts;
+	struct device *dev = regmap_get_device(st->map);
+	unsigned int idx;
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	int ret;
+
+	for (idx = 5; idx < ARRAY_SIZE(inv_icm42607_gyro_odr); ++idx) {
+		if (val == inv_icm42607_gyro_odr[idx][0] &&
+		    val2 == inv_icm42607_gyro_odr[idx][1])
+			break;
+	}
+	if (idx >= ARRAY_SIZE(inv_icm42607_gyro_odr))
+		return -EINVAL;
+
+	conf.odr = idx;
+
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	ret = inv_sensors_timestamp_update_odr(ts, inv_icm42607_odr_to_period(conf.odr),
+					       iio_buffer_enabled(indio_dev));
+	if (ret)
+		return ret;
+
+	ret = inv_icm42607_set_gyro_conf(st, &conf, NULL);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int inv_icm42607_gyro_read_raw(struct iio_dev *indio_dev,
+				      struct iio_chan_spec const *chan,
+				      int *val, int *val2, long mask)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	s16 data;
+	int ret;
+
+	switch (chan->type) {
+	case IIO_ANGL_VEL:
+		break;
+	case IIO_TEMP:
+		return inv_icm42607_temp_read_raw(indio_dev, chan, val, val2, mask);
+	default:
+		return -EINVAL;
+	}
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (!iio_device_claim_direct(indio_dev))
+			return -EBUSY;
+		ret = inv_icm42607_gyro_read_sensor(indio_dev, chan, &data);
+		iio_device_release_direct(indio_dev);
+		if (ret)
+			return ret;
+		*val = data;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		return inv_icm42607_gyro_read_scale(indio_dev, val, val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return inv_icm42607_gyro_read_odr(st, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42607_gyro_read_avail(struct iio_dev *indio_dev,
+					struct iio_chan_spec const *chan,
+					const int **vals,
+					int *type, int *length, long mask)
+{
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		*vals = (const int *)inv_icm42607_gyro_scale_nano;
+		*type = IIO_VAL_INT_PLUS_NANO;
+		*length = ARRAY_SIZE(inv_icm42607_gyro_scale_nano) * 2;
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*vals = (const int *)inv_icm42607_gyro_odr[5];
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		*length = (ARRAY_SIZE(inv_icm42607_gyro_odr) - 5) * 2;
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42607_gyro_write_raw(struct iio_dev *indio_dev,
+				       struct iio_chan_spec const *chan,
+				       int val, int val2, long mask)
+{
+	int ret;
+
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		if (!iio_device_claim_direct(indio_dev))
+			return -EBUSY;
+		ret = inv_icm42607_gyro_write_scale(indio_dev, val, val2);
+		iio_device_release_direct(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return inv_icm42607_gyro_write_odr(indio_dev, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42607_gyro_write_raw_get_fmt(struct iio_dev *indio_dev,
+					       struct iio_chan_spec const *chan,
+					       long mask)
+{
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info inv_icm42607_gyro_info = {
+	.read_raw = inv_icm42607_gyro_read_raw,
+	.read_avail = inv_icm42607_gyro_read_avail,
+	.write_raw = inv_icm42607_gyro_write_raw,
+	.write_raw_get_fmt = inv_icm42607_gyro_write_raw_get_fmt,
+	.update_scan_mode = inv_icm42607_gyro_update_scan_mode,
+};
+
+struct iio_dev *inv_icm42607_gyro_init(struct inv_icm42607_state *st)
+{
+	struct device *dev = regmap_get_device(st->map);
+	const char *name;
+	struct inv_icm42607_sensor_state *gyro_st;
+	struct inv_sensors_timestamp_chip ts_chip;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	name = devm_kasprintf(dev, GFP_KERNEL, "%s-gyro", st->hw->name);
+	if (!name)
+		return ERR_PTR(-ENOMEM);
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*gyro_st));
+	if (!indio_dev)
+		return ERR_PTR(-ENOMEM);
+	gyro_st = iio_priv(indio_dev);
+
+	gyro_st->power_mode = INV_ICM42607_SENSOR_MODE_LOW_NOISE;
+
+	/*
+	 * clock period is 32kHz (31250ns)
+	 * jitter is +/- 2% (20 per mille)
+	 */
+	ts_chip.clock_period = 31250;
+	ts_chip.jitter = 20;
+	ts_chip.init_period = inv_icm42607_odr_to_period(st->conf.gyro.odr);
+	inv_sensors_timestamp_init(&gyro_st->ts, &ts_chip);
+
+	iio_device_set_drvdata(indio_dev, st);
+	indio_dev->name = name;
+	indio_dev->info = &inv_icm42607_gyro_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = inv_icm42607_gyro_channels;
+	indio_dev->num_channels = ARRAY_SIZE(inv_icm42607_gyro_channels);
+	indio_dev->available_scan_masks = inv_icm42607_gyro_scan_masks;
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return indio_dev;
+}
-- 
2.43.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: Chris Morgan <macroalpha82@gmail.com>
To: linux-iio@vger.kernel.org
Cc: andy@kernel.org, nuno.sa@analog.com, dlechner@baylibre.com,
	jic23@kernel.org, jean-baptiste.maneyrol@tdk.com,
	linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
	heiko@sntech.de, conor+dt@kernel.org, krzk+dt@kernel.org,
	robh@kernel.org, andriy.shevchenko@intel.com,
	Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V10 8/9] iio: imu: inv_icm42607: Add Gyroscope to icm42607
Date: Thu,  4 Jun 2026 15:18:30 -0500	[thread overview]
Message-ID: <20260604201832.60656-9-macroalpha82@gmail.com> (raw)
In-Reply-To: <20260604201832.60656-1-macroalpha82@gmail.com>

From: Chris Morgan <macromorgan@hotmail.com>

Add gyroscope functions to the icm42607 driver.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/iio/imu/inv_icm42607/Makefile         |   1 +
 drivers/iio/imu/inv_icm42607/inv_icm42607.h   |   8 +
 .../iio/imu/inv_icm42607/inv_icm42607_core.c  |  48 ++
 .../iio/imu/inv_icm42607/inv_icm42607_gyro.c  | 437 ++++++++++++++++++
 4 files changed, 494 insertions(+)
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c

diff --git a/drivers/iio/imu/inv_icm42607/Makefile b/drivers/iio/imu/inv_icm42607/Makefile
index d74b23b1e1bec..7b907e0196017 100644
--- a/drivers/iio/imu/inv_icm42607/Makefile
+++ b/drivers/iio/imu/inv_icm42607/Makefile
@@ -2,6 +2,7 @@
 
 obj-$(CONFIG_INV_ICM42607) += inv-icm42607.o
 inv-icm42607-y += inv_icm42607_core.o
+inv-icm42607-y += inv_icm42607_gyro.o
 inv-icm42607-y += inv_icm42607_accel.o
 inv-icm42607-y += inv_icm42607_temp.o
 
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
index fb4bcc2b7da54..b2f081ec8776c 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -134,6 +134,7 @@ struct inv_icm42607_suspended {
  *  @orientation:	sensor chip orientation relative to main hardware.
  *  @conf:		chip sensors configurations.
  *  @suspended:		suspended sensors configuration.
+ *  @indio_gyro:	gyroscope IIO device.
  *  @indio_accel:	accelerometer IIO device.
  *  @buffer:		data transfer buffer aligned for DMA.
  */
@@ -146,6 +147,7 @@ struct inv_icm42607_state {
 	struct iio_mount_matrix orientation;
 	struct inv_icm42607_conf conf;
 	struct inv_icm42607_suspended suspended;
+	struct iio_dev *indio_gyro;
 	struct iio_dev *indio_accel;
 	__be16 buffer[3] __aligned(IIO_DMA_MINALIGN);
 };
@@ -401,6 +403,10 @@ int inv_icm42607_set_accel_conf(struct inv_icm42607_state *st,
 				struct inv_icm42607_sensor_conf *conf,
 				unsigned int *sleep_ms);
 
+int inv_icm42607_set_gyro_conf(struct inv_icm42607_state *st,
+			       struct inv_icm42607_sensor_conf *conf,
+			       unsigned int *sleep_ms);
+
 int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
 			       unsigned int *sleep_ms);
 
@@ -408,6 +414,8 @@ int inv_icm42607_core_probe(struct regmap *regmap,
 			    const struct inv_icm42607_hw *hw,
 			    inv_icm42607_bus_setup bus_setup);
 
+struct iio_dev *inv_icm42607_gyro_init(struct inv_icm42607_state *st);
+
 struct iio_dev *inv_icm42607_accel_init(struct inv_icm42607_state *st);
 
 #endif
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
index 5f311cba0572c..fd06ef5ab1e6f 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -206,6 +206,49 @@ int inv_icm42607_set_accel_conf(struct inv_icm42607_state *st,
 					  st->conf.temp_en, sleep_ms);
 }
 
+int inv_icm42607_set_gyro_conf(struct inv_icm42607_state *st,
+			       struct inv_icm42607_sensor_conf *conf,
+			       unsigned int *sleep_ms)
+{
+	struct inv_icm42607_sensor_conf *oldconf = &st->conf.gyro;
+	unsigned int val;
+	int ret;
+
+	if (conf->mode < 0)
+		conf->mode = oldconf->mode;
+	if (conf->fs < 0)
+		conf->fs = oldconf->fs;
+	if (conf->odr < 0)
+		conf->odr = oldconf->odr;
+	if (conf->filter < 0)
+		conf->filter = oldconf->filter;
+
+	if (conf->fs != oldconf->fs || conf->odr != oldconf->odr) {
+		val = FIELD_PREP(INV_ICM42607_GYRO_CONFIG0_FS_SEL_MASK,
+				 conf->fs);
+		val |= FIELD_PREP(INV_ICM42607_GYRO_CONFIG0_ODR_MASK,
+				  conf->odr);
+		ret = regmap_write(st->map, INV_ICM42607_REG_GYRO_CONFIG0, val);
+		if (ret)
+			return ret;
+		oldconf->fs = conf->fs;
+		oldconf->odr = conf->odr;
+	}
+
+	if (conf->filter != oldconf->filter) {
+		val = FIELD_PREP(INV_ICM42607_GYRO_CONFIG1_FILTER_MASK,
+				 conf->filter);
+		ret = regmap_update_bits(st->map, INV_ICM42607_REG_GYRO_CONFIG1,
+					 INV_ICM42607_GYRO_CONFIG1_FILTER_MASK, val);
+		if (ret)
+			return ret;
+		oldconf->filter = conf->filter;
+	}
+
+	return inv_icm42607_set_pwr_mgmt0(st, conf->mode, st->conf.accel.mode,
+					  st->conf.temp_en, sleep_ms);
+}
+
 int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
 			       unsigned int *sleep_ms)
 {
@@ -421,6 +464,11 @@ int inv_icm42607_core_probe(struct regmap *regmap,
 	if (IS_ERR(st->indio_accel))
 		return PTR_ERR(st->indio_accel);
 
+	/* Initialize IIO device for Gyro */
+	st->indio_gyro = inv_icm42607_gyro_init(st);
+	if (IS_ERR(st->indio_gyro))
+		return PTR_ERR(st->indio_gyro);
+
 	return 0;
 }
 EXPORT_SYMBOL_NS_GPL(inv_icm42607_core_probe, "IIO_ICM42607");
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
new file mode 100644
index 0000000000000..0f2703342122b
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
@@ -0,0 +1,437 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/math64.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/common/inv_sensors_timestamp.h>
+#include "inv_icm42607.h"
+#include "inv_icm42607_temp.h"
+
+#define INV_ICM42607_GYRO_CHAN(_modifier, _index, _ext_info)	\
+{								\
+	.type = IIO_ANGL_VEL,					\
+	.modified = 1,						\
+	.channel2 = _modifier,					\
+	.info_mask_separate =					\
+		BIT(IIO_CHAN_INFO_RAW),				\
+	.info_mask_shared_by_type =				\
+		BIT(IIO_CHAN_INFO_SCALE),			\
+	.info_mask_shared_by_all =				\
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),			\
+	.scan_index = _index,					\
+	.scan_type = {						\
+		.sign = 's',					\
+		.realbits = 16,					\
+		.storagebits = 16,				\
+		.endianness = IIO_BE,				\
+	},							\
+	.ext_info = _ext_info,					\
+}
+
+enum inv_icm42607_gyro_scan {
+	INV_ICM42607_GYRO_SCAN_X,
+	INV_ICM42607_GYRO_SCAN_Y,
+	INV_ICM42607_GYRO_SCAN_Z,
+	INV_ICM42607_GYRO_SCAN_TEMP,
+	INV_ICM42607_GYRO_SCAN_TIMESTAMP,
+};
+
+static const struct iio_chan_spec_ext_info inv_icm42607_gyro_ext_infos[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, inv_icm42607_get_mount_matrix),
+	{ }
+};
+
+static const struct iio_chan_spec inv_icm42607_gyro_channels[] = {
+	INV_ICM42607_GYRO_CHAN(IIO_MOD_X, INV_ICM42607_GYRO_SCAN_X,
+			       inv_icm42607_gyro_ext_infos),
+	INV_ICM42607_GYRO_CHAN(IIO_MOD_Y, INV_ICM42607_GYRO_SCAN_Y,
+			       inv_icm42607_gyro_ext_infos),
+	INV_ICM42607_GYRO_CHAN(IIO_MOD_Z, INV_ICM42607_GYRO_SCAN_Z,
+			       inv_icm42607_gyro_ext_infos),
+	INV_ICM42607_TEMP_CHAN(INV_ICM42607_GYRO_SCAN_TEMP),
+	IIO_CHAN_SOFT_TIMESTAMP(INV_ICM42607_GYRO_SCAN_TIMESTAMP),
+};
+
+#define INV_ICM42607_SCAN_MASK_GYRO_3AXIS				\
+	(BIT(INV_ICM42607_GYRO_SCAN_X) |				\
+	 BIT(INV_ICM42607_GYRO_SCAN_Y) |				\
+	 BIT(INV_ICM42607_GYRO_SCAN_Z))
+
+#define INV_ICM42607_SCAN_MASK_TEMP	BIT(INV_ICM42607_GYRO_SCAN_TEMP)
+
+static const unsigned long inv_icm42607_gyro_scan_masks[] = {
+	INV_ICM42607_SCAN_MASK_GYRO_3AXIS,
+	INV_ICM42607_SCAN_MASK_GYRO_3AXIS | INV_ICM42607_SCAN_MASK_TEMP,
+	0
+};
+
+/* enable gyroscope sensor */
+static int inv_icm42607_gyro_update_scan_mode(struct iio_dev *indio_dev,
+					      const unsigned long *scan_mask)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	unsigned int sleep_gyro = 0;
+	unsigned int sleep_temp = 0;
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	if (*scan_mask & INV_ICM42607_SCAN_MASK_TEMP) {
+		/* enable temp sensor */
+		ret = inv_icm42607_set_temp_conf(st, true, &sleep_temp);
+		if (ret)
+			goto out_unlock;
+	}
+
+	if (*scan_mask & INV_ICM42607_SCAN_MASK_GYRO_3AXIS) {
+		/* enable gyro sensor */
+		conf.mode = INV_ICM42607_SENSOR_MODE_LOW_NOISE;
+		ret = inv_icm42607_set_gyro_conf(st, &conf, &sleep_gyro);
+		if (ret)
+			goto out_unlock;
+	}
+
+out_unlock:
+	mutex_unlock(&st->lock);
+	/* sleep maximum required time */
+	msleep(max(sleep_gyro, sleep_temp));
+	return ret;
+}
+
+static int inv_icm42607_gyro_read_sensor(struct iio_dev *indio_dev,
+					 struct iio_chan_spec const *chan,
+					 s16 *val)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_icm42607_sensor_state *gyro_st = iio_priv(indio_dev);
+	struct device *dev = regmap_get_device(st->map);
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	unsigned int reg;
+	__be16 *data;
+	int ret;
+
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		reg = INV_ICM42607_REG_GYRO_DATA_X1;
+		break;
+	case IIO_MOD_Y:
+		reg = INV_ICM42607_REG_GYRO_DATA_Y1;
+		break;
+	case IIO_MOD_Z:
+		reg = INV_ICM42607_REG_GYRO_DATA_Z1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	/* enable gyro sensor */
+	conf.mode = gyro_st->power_mode;
+	ret = inv_icm42607_set_gyro_conf(st, &conf, NULL);
+	if (ret)
+		return ret;
+
+	/* read gyro register data */
+	data = &st->buffer[0];
+	ret = regmap_bulk_read(st->map, reg, data, sizeof(*data));
+	if (ret)
+		return ret;
+
+	*val = be16_to_cpup(data);
+	if (*val == INV_ICM42607_DATA_INVALID)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const int inv_icm42607_gyro_scale_nano[][2] = {
+	[INV_ICM42607_GYRO_FS_2000DPS] = { 0, 1065264 },
+	[INV_ICM42607_GYRO_FS_1000DPS] = { 0, 532632 },
+	[INV_ICM42607_GYRO_FS_500DPS] = { 0, 266316 },
+	[INV_ICM42607_GYRO_FS_250DPS] = { 0, 133158 },
+};
+
+static int inv_icm42607_gyro_read_scale(struct iio_dev *indio_dev,
+					int *val, int *val2)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	unsigned int idx;
+
+	idx = st->conf.gyro.fs;
+
+	*val = inv_icm42607_gyro_scale_nano[idx][0];
+	*val2 = inv_icm42607_gyro_scale_nano[idx][1];
+	return IIO_VAL_INT_PLUS_NANO;
+}
+
+static int inv_icm42607_gyro_write_scale(struct iio_dev *indio_dev,
+					 int val, int val2)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	struct device *dev = regmap_get_device(st->map);
+	unsigned int idx;
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	size_t scales_len = ARRAY_SIZE(inv_icm42607_gyro_scale_nano);
+	int ret;
+
+	for (idx = 0; idx < scales_len; idx++) {
+		if (val == inv_icm42607_gyro_scale_nano[idx][0] &&
+		    val2 == inv_icm42607_gyro_scale_nano[idx][1])
+			break;
+	}
+	if (idx >= scales_len)
+		return -EINVAL;
+
+	conf.fs = idx;
+
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	return inv_icm42607_set_gyro_conf(st, &conf, NULL);
+}
+
+static const int inv_icm42607_gyro_odr[][2] = {
+	[INV_ICM42607_ODR_12_5HZ] = { 12, 500000 },
+	[INV_ICM42607_ODR_25HZ] = { 25, 0 },
+	[INV_ICM42607_ODR_50HZ] = { 50, 0 },
+	[INV_ICM42607_ODR_100HZ] = { 100, 0 },
+	[INV_ICM42607_ODR_200HZ] = { 200, 0 },
+	[INV_ICM42607_ODR_400HZ] = { 400, 0 },
+	[INV_ICM42607_ODR_800HZ] = { 800, 0 },
+	[INV_ICM42607_ODR_1600HZ] = { 1600, 0 },
+};
+
+static int inv_icm42607_gyro_read_odr(struct inv_icm42607_state *st,
+				      int *val, int *val2)
+{
+	unsigned int odr;
+	unsigned int i;
+
+	odr = st->conf.gyro.odr;
+
+	for (i = 5; i < ARRAY_SIZE(inv_icm42607_gyro_odr); ++i) {
+		if (i == odr)
+			break;
+	}
+	if (i >= ARRAY_SIZE(inv_icm42607_gyro_odr))
+		return -EINVAL;
+
+	*val = inv_icm42607_gyro_odr[i][0];
+	*val2 = inv_icm42607_gyro_odr[i][1];
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int inv_icm42607_gyro_write_odr(struct iio_dev *indio_dev,
+				       int val, int val2)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_icm42607_sensor_state *gyro_st = iio_priv(indio_dev);
+	struct inv_sensors_timestamp *ts = &gyro_st->ts;
+	struct device *dev = regmap_get_device(st->map);
+	unsigned int idx;
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	int ret;
+
+	for (idx = 5; idx < ARRAY_SIZE(inv_icm42607_gyro_odr); ++idx) {
+		if (val == inv_icm42607_gyro_odr[idx][0] &&
+		    val2 == inv_icm42607_gyro_odr[idx][1])
+			break;
+	}
+	if (idx >= ARRAY_SIZE(inv_icm42607_gyro_odr))
+		return -EINVAL;
+
+	conf.odr = idx;
+
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	ret = inv_sensors_timestamp_update_odr(ts, inv_icm42607_odr_to_period(conf.odr),
+					       iio_buffer_enabled(indio_dev));
+	if (ret)
+		return ret;
+
+	ret = inv_icm42607_set_gyro_conf(st, &conf, NULL);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int inv_icm42607_gyro_read_raw(struct iio_dev *indio_dev,
+				      struct iio_chan_spec const *chan,
+				      int *val, int *val2, long mask)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	s16 data;
+	int ret;
+
+	switch (chan->type) {
+	case IIO_ANGL_VEL:
+		break;
+	case IIO_TEMP:
+		return inv_icm42607_temp_read_raw(indio_dev, chan, val, val2, mask);
+	default:
+		return -EINVAL;
+	}
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (!iio_device_claim_direct(indio_dev))
+			return -EBUSY;
+		ret = inv_icm42607_gyro_read_sensor(indio_dev, chan, &data);
+		iio_device_release_direct(indio_dev);
+		if (ret)
+			return ret;
+		*val = data;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		return inv_icm42607_gyro_read_scale(indio_dev, val, val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return inv_icm42607_gyro_read_odr(st, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42607_gyro_read_avail(struct iio_dev *indio_dev,
+					struct iio_chan_spec const *chan,
+					const int **vals,
+					int *type, int *length, long mask)
+{
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		*vals = (const int *)inv_icm42607_gyro_scale_nano;
+		*type = IIO_VAL_INT_PLUS_NANO;
+		*length = ARRAY_SIZE(inv_icm42607_gyro_scale_nano) * 2;
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*vals = (const int *)inv_icm42607_gyro_odr[5];
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		*length = (ARRAY_SIZE(inv_icm42607_gyro_odr) - 5) * 2;
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42607_gyro_write_raw(struct iio_dev *indio_dev,
+				       struct iio_chan_spec const *chan,
+				       int val, int val2, long mask)
+{
+	int ret;
+
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		if (!iio_device_claim_direct(indio_dev))
+			return -EBUSY;
+		ret = inv_icm42607_gyro_write_scale(indio_dev, val, val2);
+		iio_device_release_direct(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return inv_icm42607_gyro_write_odr(indio_dev, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42607_gyro_write_raw_get_fmt(struct iio_dev *indio_dev,
+					       struct iio_chan_spec const *chan,
+					       long mask)
+{
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info inv_icm42607_gyro_info = {
+	.read_raw = inv_icm42607_gyro_read_raw,
+	.read_avail = inv_icm42607_gyro_read_avail,
+	.write_raw = inv_icm42607_gyro_write_raw,
+	.write_raw_get_fmt = inv_icm42607_gyro_write_raw_get_fmt,
+	.update_scan_mode = inv_icm42607_gyro_update_scan_mode,
+};
+
+struct iio_dev *inv_icm42607_gyro_init(struct inv_icm42607_state *st)
+{
+	struct device *dev = regmap_get_device(st->map);
+	const char *name;
+	struct inv_icm42607_sensor_state *gyro_st;
+	struct inv_sensors_timestamp_chip ts_chip;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	name = devm_kasprintf(dev, GFP_KERNEL, "%s-gyro", st->hw->name);
+	if (!name)
+		return ERR_PTR(-ENOMEM);
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*gyro_st));
+	if (!indio_dev)
+		return ERR_PTR(-ENOMEM);
+	gyro_st = iio_priv(indio_dev);
+
+	gyro_st->power_mode = INV_ICM42607_SENSOR_MODE_LOW_NOISE;
+
+	/*
+	 * clock period is 32kHz (31250ns)
+	 * jitter is +/- 2% (20 per mille)
+	 */
+	ts_chip.clock_period = 31250;
+	ts_chip.jitter = 20;
+	ts_chip.init_period = inv_icm42607_odr_to_period(st->conf.gyro.odr);
+	inv_sensors_timestamp_init(&gyro_st->ts, &ts_chip);
+
+	iio_device_set_drvdata(indio_dev, st);
+	indio_dev->name = name;
+	indio_dev->info = &inv_icm42607_gyro_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = inv_icm42607_gyro_channels;
+	indio_dev->num_channels = ARRAY_SIZE(inv_icm42607_gyro_channels);
+	indio_dev->available_scan_masks = inv_icm42607_gyro_scan_masks;
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return indio_dev;
+}
-- 
2.43.0


  parent reply	other threads:[~2026-06-04 20:21 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-04 20:18 [PATCH V10 0/9] Add Invensense ICM42607 Chris Morgan
2026-06-04 20:18 ` Chris Morgan
2026-06-04 20:18 ` [PATCH V10 1/9] dt-bindings: iio: imu: icm42600: Add mount-matrix to icm42600 Chris Morgan
2026-06-04 20:18   ` Chris Morgan
2026-06-04 20:18 ` [PATCH V10 2/9] dt-bindings: iio: imu: icm42600: Add icm42607 Chris Morgan
2026-06-04 20:18   ` Chris Morgan
2026-06-05 10:03   ` Krzysztof Kozlowski
2026-06-05 10:03     ` Krzysztof Kozlowski
2026-06-04 20:18 ` [PATCH V10 3/9] iio: imu: inv_icm42607: Add inv_icm42607 Core Driver Chris Morgan
2026-06-04 20:18   ` Chris Morgan
2026-06-04 20:45   ` sashiko-bot
2026-06-05 16:08   ` Andy Shevchenko
2026-06-05 16:08     ` Andy Shevchenko
2026-06-04 20:18 ` [PATCH V10 4/9] iio: imu: inv_icm42607: Add I2C and SPI For icm42607 Chris Morgan
2026-06-04 20:18   ` Chris Morgan
2026-06-04 20:18 ` [PATCH V10 5/9] iio: imu: inv_icm42607: Add PM support for icm42607 Chris Morgan
2026-06-04 20:18   ` Chris Morgan
2026-06-04 21:17   ` sashiko-bot
2026-06-04 20:18 ` [PATCH V10 6/9] iio: imu: inv_icm42607: Add Temp Support in icm42607 Chris Morgan
2026-06-04 20:18   ` Chris Morgan
2026-06-04 21:34   ` sashiko-bot
2026-06-04 20:18 ` [PATCH V10 7/9] iio: imu: inv_icm42607: Add Accelerometer for icm42607 Chris Morgan
2026-06-04 20:18   ` Chris Morgan
2026-06-04 21:45   ` sashiko-bot
2026-06-04 20:18 ` Chris Morgan [this message]
2026-06-04 20:18   ` [PATCH V10 8/9] iio: imu: inv_icm42607: Add Gyroscope to icm42607 Chris Morgan
2026-06-04 22:02   ` sashiko-bot
2026-06-04 20:18 ` [PATCH V10 9/9] arm64: dts: rockchip: Add icm42607p IMU for RG-DS Chris Morgan
2026-06-04 20:18   ` Chris Morgan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260604201832.60656-9-macroalpha82@gmail.com \
    --to=macroalpha82@gmail.com \
    --cc=andriy.shevchenko@intel.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=heiko@sntech.de \
    --cc=jean-baptiste.maneyrol@tdk.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=macromorgan@hotmail.com \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.