All of lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Krishna Chaitanya Chundru" <krishna.chundru@oss.qualcomm.com>
Cc: conor+dt@kernel.org, devicetree@vger.kernel.org, robh@kernel.org
Subject: Re: [PATCH v2 26/37] arm64: dts: qcom: sc8180x: Move PCIe phy and GPIOs to root port node
Date: Thu, 11 Jun 2026 05:19:16 +0000	[thread overview]
Message-ID: <20260611051917.26DA11F00893@smtp.kernel.org> (raw)
In-Reply-To: <20260611-wake-v2-26-2744251b1181@oss.qualcomm.com>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Commit message and code mismatch regarding the `phy-names` property.
--

commit 3bba776bd4c695d8130ddad562efe19bc319bd91
Author: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>

arm64: dts: qcom: sc8180x: Move PCIe phy and GPIOs to root port node

This patch relocates the PCIe PHY references and perst/wake GPIO properties
from the root complex controller nodes to the root port nodes. It also assigns
labels to the root port nodes and updates the respective board files.

> diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
> --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
[ ... ]
> @@ -1779,13 +1779,11 @@ pcie0: pcie@1c00000 {
>  					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
>  			interconnect-names = "pcie-mem", "cpu-pcie";
>  
> -			phys = <&pcie0_phy>;
> -			phy-names = "pciephy";
>  			dma-coherent;
>  
>  			status = "disabled";
>  
> -			pcie@0 {
> +			pcie0_port0: pcie@0 {
>  				device_type = "pci";
>  				reg = <0x0 0x0 0x0 0x0 0x0>;
>  				bus-range = <0x01 0xff>;
> @@ -1793,6 +1791,8 @@ pcie@0 {
>  				#address-cells = <3>;
>  				#size-cells = <2>;
>  				ranges;
> +
> +				phys = <&pcie0_phy>;
>  			};

[Severity: Medium]
The commit message mentions "Move phys and phy-names from the controller to
pcie0_port0, pcie1_port0, pcie2_port0, and pcie3_port0...", but does this
actually move the phy-names property?

It looks like phy-names is removed entirely from the controller and not added
alongside phys in the pcie0_port0 node (or the other port nodes).

If dropping phy-names is intentional because it is no longer required for
single-PHY nodes, could the commit message be updated to clarify that it is
being removed rather than moved?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260611-wake-v2-0-2744251b1181@oss.qualcomm.com?part=26

  reply	other threads:[~2026-06-11  5:19 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-11  4:58 [PATCH v2 00/37] arm64: dts: qcom: Fix PCIe wake GPIO polarity Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 01/37] ARM: dts: qcom: sdx55: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 02/37] arm64: dts: qcom: msm8996: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 03/37] arm64: dts: qcom: sdm845: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 04/37] arm64: dts: qcom: sc8180x: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 05/37] arm64: dts: qcom: sm8150: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 06/37] arm64: dts: qcom: sm8250: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 07/37] arm64: dts: qcom: sm8350: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 08/37] arm64: dts: qcom: sm8450: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 09/37] arm64: dts: qcom: sm8550: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 10/37] arm64: dts: qcom: sm8650: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 11/37] arm64: dts: qcom: sm8750: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 12/37] arm64: dts: qcom: kaanapali: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 13/37] arm64: dts: qcom: sar2130p: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 14/37] arm64: dts: qcom: monaco: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 15/37] arm64: dts: qcom: lemans: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 16/37] arm64: dts: qcom: sa8540p-ride: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 17/37] arm64: dts: qcom: kodiak: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 18/37] arm64: dts: qcom: talos: " Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 19/37] arm64: dts: qcom: lemans: Move PCIe phy and GPIOs to root port node Krishna Chaitanya Chundru
2026-06-11  4:58 ` [PATCH v2 20/37] arm64: dts: qcom: msm8998: " Krishna Chaitanya Chundru
2026-06-11  5:12   ` sashiko-bot
2026-06-11  4:58 ` [PATCH v2 21/37] arm64: dts: qcom: qcs404: " Krishna Chaitanya Chundru
2026-06-11  5:13   ` sashiko-bot
2026-06-11  4:58 ` [PATCH v2 22/37] arm64: dts: qcom: qcs8550: Move PCIe " Krishna Chaitanya Chundru
2026-06-11  5:15   ` sashiko-bot
2026-06-11  4:58 ` [PATCH v2 23/37] arm64: dts: qcom: sa8295p: " Krishna Chaitanya Chundru
2026-06-11  7:48   ` Konrad Dybcio
2026-06-11  4:59 ` [PATCH v2 24/37] arm64: dts: qcom: sa8540p: " Krishna Chaitanya Chundru
2026-06-11  4:59 ` [PATCH v2 25/37] arm64: dts: qcom: sar2130p: Move PCIe phy and " Krishna Chaitanya Chundru
2026-06-11  4:59 ` [PATCH v2 26/37] arm64: dts: qcom: sc8180x: " Krishna Chaitanya Chundru
2026-06-11  5:19   ` sashiko-bot [this message]
2026-06-11  7:49   ` Konrad Dybcio
2026-06-11  4:59 ` [PATCH v2 27/37] arm64: dts: qcom: sc8280xp: " Krishna Chaitanya Chundru
2026-06-11  4:59 ` [PATCH v2 28/37] arm64: dts: qcom: sdm845: " Krishna Chaitanya Chundru
2026-06-11  5:21   ` sashiko-bot
2026-06-11  4:59 ` [PATCH v2 29/37] arm64: dts: qcom: sm8150: " Krishna Chaitanya Chundru
2026-06-11  5:21   ` sashiko-bot
2026-06-11  4:59 ` [PATCH v2 30/37] arm64: dts: qcom: sm8250: " Krishna Chaitanya Chundru
2026-06-11  5:24   ` sashiko-bot
2026-06-11  4:59 ` [PATCH v2 31/37] arm64: dts: qcom: sm8350: " Krishna Chaitanya Chundru
2026-06-11  5:21   ` sashiko-bot
2026-06-11  4:59 ` [PATCH v2 32/37] arm64: dts: qcom: sm8450: " Krishna Chaitanya Chundru
2026-06-11  5:23   ` sashiko-bot
2026-06-11  4:59 ` [PATCH v2 33/37] arm64: dts: qcom: sm8550: " Krishna Chaitanya Chundru
2026-06-11  5:25   ` sashiko-bot
2026-06-11  4:59 ` [PATCH v2 34/37] arm64: dts: qcom: talos: " Krishna Chaitanya Chundru
2026-06-11  5:22   ` sashiko-bot
2026-06-11  4:59 ` [PATCH v2 35/37] arm64: dts: qcom: sm8650: " Krishna Chaitanya Chundru
2026-06-11  5:24   ` sashiko-bot
2026-06-11  4:59 ` [PATCH v2 36/37] arm64: dts: qcom: kodiak: " Krishna Chaitanya Chundru
2026-06-11  5:26   ` sashiko-bot
2026-06-11  4:59 ` [PATCH v2 37/37] arm64: dts: qcom: msm8996: " Krishna Chaitanya Chundru
2026-06-11  7:24   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260611051917.26DA11F00893@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krishna.chundru@oss.qualcomm.com \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.