From: phucduc.bui@gmail.com
To: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Shengjiu Wang <shengjiu.wang@gmail.com>,
Xiubo Li <Xiubo.Lee@gmail.com>, Frank Li <Frank.Li@nxp.com>,
Fabio Estevam <festevam@gmail.com>,
Nicolin Chen <nicoleotsuka@gmail.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
linuxppc-dev@lists.ozlabs.org,
bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 10/11] ASoC: fsl: mpc5200_dma: Use guard() for spin locks
Date: Fri, 12 Jun 2026 20:26:38 +0700 [thread overview]
Message-ID: <20260612132639.78086-11-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260612132639.78086-1-phucduc.bui@gmail.com>
From: bui duc phuc <phucduc.bui@gmail.com>
Clean up the code using guard() for spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
sound/soc/fsl/mpc5200_dma.c | 56 ++++++++++++++++++-------------------
1 file changed, 28 insertions(+), 28 deletions(-)
diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
index 56e2cf2f727b..bfedb2dea0b3 100644
--- a/sound/soc/fsl/mpc5200_dma.c
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -77,18 +77,20 @@ static irqreturn_t psc_dma_bcom_irq(int irq, void *_psc_dma_stream)
{
struct psc_dma_stream *s = _psc_dma_stream;
- spin_lock(&s->psc_dma->lock);
- /* For each finished period, dequeue the completed period buffer
- * and enqueue a new one in it's place. */
- while (bcom_buffer_done(s->bcom_task)) {
- bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
+ scoped_guard(spinlock, &s->psc_dma->lock) {
+ /*
+ * For each finished period, dequeue the completed period buffer
+ * and enqueue a new one in its place
+ */
+ while (bcom_buffer_done(s->bcom_task)) {
+ bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
- s->period_current = (s->period_current+1) % s->runtime->periods;
- s->period_count++;
+ s->period_current = (s->period_current+1) % s->runtime->periods;
+ s->period_count++;
- psc_dma_bcom_enqueue_next_buffer(s);
+ psc_dma_bcom_enqueue_next_buffer(s);
+ }
}
- spin_unlock(&s->psc_dma->lock);
/* If the stream is active, then also inform the PCM middle layer
* of the period finished event. */
@@ -116,7 +118,6 @@ static int psc_dma_trigger(struct snd_soc_component *component,
struct psc_dma_stream *s = to_psc_dma_stream(substream, psc_dma);
struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
u16 imr;
- unsigned long flags;
int i;
switch (cmd) {
@@ -135,19 +136,18 @@ static int psc_dma_trigger(struct snd_soc_component *component,
/* Fill up the bestcomm bd queue and enable DMA.
* This will begin filling the PSC's fifo.
*/
- spin_lock_irqsave(&psc_dma->lock, flags);
-
- if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
- bcom_gen_bd_rx_reset(s->bcom_task);
- else
- bcom_gen_bd_tx_reset(s->bcom_task);
+ scoped_guard(spinlock_irqsave, &psc_dma->lock) {
+ if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+ bcom_gen_bd_rx_reset(s->bcom_task);
+ else
+ bcom_gen_bd_tx_reset(s->bcom_task);
- for (i = 0; i < runtime->periods; i++)
- if (!bcom_queue_full(s->bcom_task))
- psc_dma_bcom_enqueue_next_buffer(s);
+ for (i = 0; i < runtime->periods; i++)
+ if (!bcom_queue_full(s->bcom_task))
+ psc_dma_bcom_enqueue_next_buffer(s);
- bcom_enable(s->bcom_task);
- spin_unlock_irqrestore(&psc_dma->lock, flags);
+ bcom_enable(s->bcom_task);
+ }
out_8(®s->command, MPC52xx_PSC_RST_ERR_STAT);
@@ -158,13 +158,13 @@ static int psc_dma_trigger(struct snd_soc_component *component,
substream->pstr->stream, s->period_count);
s->active = 0;
- spin_lock_irqsave(&psc_dma->lock, flags);
- bcom_disable(s->bcom_task);
- if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
- bcom_gen_bd_rx_reset(s->bcom_task);
- else
- bcom_gen_bd_tx_reset(s->bcom_task);
- spin_unlock_irqrestore(&psc_dma->lock, flags);
+ scoped_guard(spinlock_irqsave, &psc_dma->lock) {
+ bcom_disable(s->bcom_task);
+ if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+ bcom_gen_bd_rx_reset(s->bcom_task);
+ else
+ bcom_gen_bd_tx_reset(s->bcom_task);
+ }
break;
--
2.43.0
next prev parent reply other threads:[~2026-06-12 13:28 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-12 13:26 [PATCH 00/11] ASoC: fsl: Use guard() for mutex & spin locks phucduc.bui
2026-06-12 13:26 ` [PATCH 01/11] ASoC: fsl_asrc: Use guard() for " phucduc.bui
2026-06-12 13:38 ` sashiko-bot
2026-06-12 13:26 ` [PATCH 02/11] ASoC: fsl_audmix: " phucduc.bui
2026-06-12 13:26 ` [PATCH 03/11] ASoC: fsl_easrc: " phucduc.bui
2026-06-12 13:36 ` sashiko-bot
2026-06-12 13:26 ` [PATCH 04/11] ASoC: fsl_esai: " phucduc.bui
2026-06-12 13:26 ` [PATCH 05/11] ASoC: fsl_spdif: " phucduc.bui
2026-06-12 13:38 ` sashiko-bot
2026-06-12 13:26 ` [PATCH 06/11] ASoC: fsl_ssi: Use guard() for mutex locks phucduc.bui
2026-06-12 13:26 ` [PATCH 07/11] ASoC: fsl_xcvr: Use guard() for spin locks phucduc.bui
2026-06-12 13:37 ` sashiko-bot
2026-06-12 13:26 ` [PATCH 08/11] ASoC: imx-audio-rpmsg: " phucduc.bui
2026-06-12 13:46 ` sashiko-bot
2026-06-12 13:26 ` [PATCH 09/11] ASoC: fsl_rpmsg: Use guard() for mutex & " phucduc.bui
2026-06-12 13:42 ` sashiko-bot
2026-06-12 13:26 ` phucduc.bui [this message]
2026-06-12 13:44 ` [PATCH 10/11] ASoC: fsl: mpc5200_dma: Use guard() for " sashiko-bot
2026-06-12 13:26 ` [PATCH 11/11] ASoC: fsl: mpc5200_psc_ac97: Use guard() for mutex locks phucduc.bui
2026-06-12 13:42 ` sashiko-bot
2026-06-12 15:05 ` Mark Brown
2026-06-12 21:42 ` Bui Duc Phuc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260612132639.78086-11-phucduc.bui@gmail.com \
--to=phucduc.bui@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=Xiubo.Lee@gmail.com \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nicoleotsuka@gmail.com \
--cc=perex@perex.cz \
--cc=s.hauer@pengutronix.de \
--cc=shengjiu.wang@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.