All of lore.kernel.org
 help / color / mirror / Atom feed
From: phucduc.bui@gmail.com
To: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Shengjiu Wang <shengjiu.wang@gmail.com>,
	Xiubo Li <Xiubo.Lee@gmail.com>, Frank Li <Frank.Li@nxp.com>,
	Fabio Estevam <festevam@gmail.com>,
	Nicolin Chen <nicoleotsuka@gmail.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
	linuxppc-dev@lists.ozlabs.org,
	bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 11/11] ASoC: fsl: mpc5200_psc_ac97: Use guard() for mutex locks
Date: Fri, 12 Jun 2026 20:26:39 +0700	[thread overview]
Message-ID: <20260612132639.78086-12-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260612132639.78086-1-phucduc.bui@gmail.com>

From: bui duc phuc <phucduc.bui@gmail.com>

Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/fsl/mpc5200_psc_ac97.c | 34 +++++++++++---------------------
 1 file changed, 12 insertions(+), 22 deletions(-)

diff --git a/sound/soc/fsl/mpc5200_psc_ac97.c b/sound/soc/fsl/mpc5200_psc_ac97.c
index 8554fb690772..80666da923d0 100644
--- a/sound/soc/fsl/mpc5200_psc_ac97.c
+++ b/sound/soc/fsl/mpc5200_psc_ac97.c
@@ -31,14 +31,13 @@ static unsigned short psc_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
 	int status;
 	unsigned int val;
 
-	mutex_lock(&psc_dma->mutex);
+	guard(mutex)(&psc_dma->mutex);
 
 	/* Wait for command send status zero = ready */
 	status = spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) &
 				MPC52xx_PSC_SR_CMDSEND), 100, 0);
 	if (status == 0) {
 		pr_err("timeout on ac97 bus (rdy)\n");
-		mutex_unlock(&psc_dma->mutex);
 		return -ENODEV;
 	}
 
@@ -54,19 +53,16 @@ static unsigned short psc_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
 	if (status == 0) {
 		pr_err("timeout on ac97 read (val) %x\n",
 				in_be16(&psc_dma->psc_regs->sr_csr.status));
-		mutex_unlock(&psc_dma->mutex);
 		return -ENODEV;
 	}
 	/* Get the data */
 	val = in_be32(&psc_dma->psc_regs->ac97_data);
 	if (((val >> 24) & 0x7f) != reg) {
 		pr_err("reg echo error on ac97 read\n");
-		mutex_unlock(&psc_dma->mutex);
 		return -ENODEV;
 	}
 	val = (val >> 8) & 0xffff;
 
-	mutex_unlock(&psc_dma->mutex);
 	return (unsigned short) val;
 }
 
@@ -75,52 +71,46 @@ static void psc_ac97_write(struct snd_ac97 *ac97,
 {
 	int status;
 
-	mutex_lock(&psc_dma->mutex);
+	guard(mutex)(&psc_dma->mutex);
 
 	/* Wait for command status zero = ready */
 	status = spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) &
 				MPC52xx_PSC_SR_CMDSEND), 100, 0);
 	if (status == 0) {
 		pr_err("timeout on ac97 bus (write)\n");
-		goto out;
+		return;
 	}
 	/* Write data */
 	out_be32(&psc_dma->psc_regs->ac97_cmd,
 			((reg & 0x7f) << 24) | (val << 8));
-
- out:
-	mutex_unlock(&psc_dma->mutex);
 }
 
 static void psc_ac97_warm_reset(struct snd_ac97 *ac97)
 {
 	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
 
-	mutex_lock(&psc_dma->mutex);
+	guard(mutex)(&psc_dma->mutex);
 
 	out_be32(&regs->sicr, psc_dma->sicr | MPC52xx_PSC_SICR_AWR);
 	udelay(3);
 	out_be32(&regs->sicr, psc_dma->sicr);
-
-	mutex_unlock(&psc_dma->mutex);
 }
 
 static void psc_ac97_cold_reset(struct snd_ac97 *ac97)
 {
 	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
 
-	mutex_lock(&psc_dma->mutex);
-	dev_dbg(psc_dma->dev, "cold reset\n");
+	scoped_guard(mutex_lock, &psc_dma->mutex) {
+		dev_dbg(psc_dma->dev, "cold reset\n");
 
-	mpc5200_psc_ac97_gpio_reset(psc_dma->id);
+		mpc5200_psc_ac97_gpio_reset(psc_dma->id);
 
-	/* Notify the PSC that a reset has occurred */
-	out_be32(&regs->sicr, psc_dma->sicr | MPC52xx_PSC_SICR_ACRB);
+		/* Notify the PSC that a reset has occurred */
+		out_be32(&regs->sicr, psc_dma->sicr | MPC52xx_PSC_SICR_ACRB);
 
-	/* Re-enable RX and TX */
-	out_8(&regs->command, MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
-
-	mutex_unlock(&psc_dma->mutex);
+		/* Re-enable RX and TX */
+		out_8(&regs->command, MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
+	}
 
 	usleep_range(1000, 2000);
 	psc_ac97_warm_reset(ac97);
-- 
2.43.0



  parent reply	other threads:[~2026-06-12 13:28 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-12 13:26 [PATCH 00/11] ASoC: fsl: Use guard() for mutex & spin locks phucduc.bui
2026-06-12 13:26 ` [PATCH 01/11] ASoC: fsl_asrc: Use guard() for " phucduc.bui
2026-06-12 13:38   ` sashiko-bot
2026-06-12 13:26 ` [PATCH 02/11] ASoC: fsl_audmix: " phucduc.bui
2026-06-12 13:26 ` [PATCH 03/11] ASoC: fsl_easrc: " phucduc.bui
2026-06-12 13:36   ` sashiko-bot
2026-06-12 13:26 ` [PATCH 04/11] ASoC: fsl_esai: " phucduc.bui
2026-06-12 13:26 ` [PATCH 05/11] ASoC: fsl_spdif: " phucduc.bui
2026-06-12 13:38   ` sashiko-bot
2026-06-12 13:26 ` [PATCH 06/11] ASoC: fsl_ssi: Use guard() for mutex locks phucduc.bui
2026-06-12 13:26 ` [PATCH 07/11] ASoC: fsl_xcvr: Use guard() for spin locks phucduc.bui
2026-06-12 13:37   ` sashiko-bot
2026-06-12 13:26 ` [PATCH 08/11] ASoC: imx-audio-rpmsg: " phucduc.bui
2026-06-12 13:46   ` sashiko-bot
2026-06-12 13:26 ` [PATCH 09/11] ASoC: fsl_rpmsg: Use guard() for mutex & " phucduc.bui
2026-06-12 13:42   ` sashiko-bot
2026-06-12 13:26 ` [PATCH 10/11] ASoC: fsl: mpc5200_dma: Use guard() for " phucduc.bui
2026-06-12 13:44   ` sashiko-bot
2026-06-12 13:26 ` phucduc.bui [this message]
2026-06-12 13:42   ` [PATCH 11/11] ASoC: fsl: mpc5200_psc_ac97: Use guard() for mutex locks sashiko-bot
2026-06-12 15:05   ` Mark Brown
2026-06-12 21:42     ` Bui Duc Phuc

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260612132639.78086-12-phucduc.bui@gmail.com \
    --to=phucduc.bui@gmail.com \
    --cc=Frank.Li@nxp.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=perex@perex.cz \
    --cc=s.hauer@pengutronix.de \
    --cc=shengjiu.wang@gmail.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.