From: Ranjan Kumar <ranjan.kumar@broadcom.com>
To: linux-scsi@vger.kernel.org, martin.petersen@oracle.com
Cc: sathya.prakash@broadcom.com, chandrakanth.patil@broadcom.com,
vishakhavc@google.com, ipylypiv@google.com,
Ranjan Kumar <ranjan.kumar@broadcom.com>
Subject: [PATCH v1 01/10] mpi3mr: Skip device shutdown during unload per controller configuration
Date: Fri, 26 Jun 2026 17:11:00 +0530 [thread overview]
Message-ID: <20260626114109.43685-2-ranjan.kumar@broadcom.com> (raw)
In-Reply-To: <20260626114109.43685-1-ranjan.kumar@broadcom.com>
The controller may be configured through Driver Page 1 to suppress
device shutdown requests during driver unload. Cache this setting and
skip the device shutdown request during IOC shutdown when unloading
the driver.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
---
drivers/scsi/mpi3mr/mpi3mr.h | 3 +++
drivers/scsi/mpi3mr/mpi3mr_fw.c | 35 ++++++++++++++++++++++++---------
drivers/scsi/mpi3mr/mpi3mr_os.c | 2 ++
3 files changed, 31 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index c25525fe0671..39096004c60a 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -1410,6 +1410,9 @@ struct mpi3mr_ioc {
struct dma_pool *trace_buf_pool;
struct segments *trace_buf;
u8 invalid_io_comp;
+ bool is_unload;
+ bool skip_dev_shutdown_on_unload;
+
};
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 31b19ed1528e..eb730318db47 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -4107,26 +4107,35 @@ static int mpi3mr_repost_diag_bufs(struct mpi3mr_ioc *mrioc)
}
/**
- * mpi3mr_read_tsu_interval - Update time stamp interval
+ * mpi3mr_read_driver_page1 - Read Driver Page 1 parameters
* @mrioc: Adapter instance reference
*
- * Update time stamp interval if its defined in driver page 1,
- * otherwise use default value.
+ * Reads and caches Driver Page 1 parameters such as
+ * timestamp update interval and driver behavior flags.
*
* Return: Nothing
*/
static void
-mpi3mr_read_tsu_interval(struct mpi3mr_ioc *mrioc)
+mpi3mr_read_driver_page1(struct mpi3mr_ioc *mrioc)
{
struct mpi3_driver_page1 driver_pg1;
u16 pg_sz = sizeof(driver_pg1);
int retval = 0;
mrioc->ts_update_interval = MPI3MR_TSUPDATE_INTERVAL;
+ mrioc->skip_dev_shutdown_on_unload = 0;
retval = mpi3mr_cfg_get_driver_pg1(mrioc, &driver_pg1, pg_sz);
- if (!retval && driver_pg1.time_stamp_update)
+
+ if (retval)
+ return;
+
+ if (driver_pg1.time_stamp_update)
mrioc->ts_update_interval = (driver_pg1.time_stamp_update * 60);
+
+ mrioc->skip_dev_shutdown_on_unload =
+ (driver_pg1.flags &
+ MPI3_DRIVER1_FLAGS_DEVICE_SHUTDOWN_ON_UNLOAD_DISABLE) ? 1 : 0;
}
/**
@@ -4432,7 +4441,7 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
goto out_failed_noretry;
}
- mpi3mr_read_tsu_interval(mrioc);
+ mpi3mr_read_driver_page1(mrioc);
mpi3mr_print_ioc_info(mrioc);
dprint_init(mrioc, "allocating host diag buffers\n");
@@ -4604,7 +4613,7 @@ int mpi3mr_reinit_ioc(struct mpi3mr_ioc *mrioc, u8 is_resume)
goto out_failed_noretry;
}
- mpi3mr_read_tsu_interval(mrioc);
+ mpi3mr_read_driver_page1(mrioc);
mpi3mr_print_ioc_info(mrioc);
if (is_resume) {
@@ -5089,8 +5098,16 @@ static void mpi3mr_issue_ioc_shutdown(struct mpi3mr_ioc *mrioc)
return;
}
- shutdown_action = MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NORMAL |
- MPI3_SYSIF_IOC_CONFIG_DEVICE_SHUTDOWN_SEND_REQ;
+ shutdown_action = MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NORMAL;
+
+ if (!(mrioc->is_unload && mrioc->skip_dev_shutdown_on_unload))
+ shutdown_action |=
+ MPI3_SYSIF_IOC_CONFIG_DEVICE_SHUTDOWN_SEND_REQ;
+ else
+ ioc_info(mrioc,
+ "The shutdown request is issued without the device shutdown bit set\n"
+ "as indicated by the controller configuration\n");
+
ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
ioc_config |= shutdown_action;
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 402d1f35d214..d2a20f2721db 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -5665,6 +5665,8 @@ static void mpi3mr_remove(struct pci_dev *pdev)
return;
mrioc = shost_priv(shost);
+ mrioc->is_unload = true;
+
while (mrioc->reset_in_progress || mrioc->is_driver_loading)
ssleep(1);
--
2.47.3
next prev parent reply other threads:[~2026-06-26 11:48 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-26 11:40 [PATCH v1 00/10] mpi3mr: Few Enhancements and minor fixes Ranjan Kumar
2026-06-26 11:41 ` Ranjan Kumar [this message]
2026-06-26 12:03 ` [PATCH v1 01/10] mpi3mr: Skip device shutdown during unload per controller configuration sashiko-bot
2026-06-26 11:41 ` [PATCH v1 02/10] mpi3mr: Update MPI Headers to revision 41 Ranjan Kumar
2026-06-26 12:07 ` sashiko-bot
2026-06-26 11:41 ` [PATCH v1 03/10] mpi3mr: Add early timestamp synchronization after driver load Ranjan Kumar
2026-06-26 11:41 ` [PATCH v1 04/10] mpi3mr: Fix NVMe page size caching for non-operational devices Ranjan Kumar
2026-06-26 12:07 ` sashiko-bot
2026-06-26 11:41 ` [PATCH v1 05/10] mpi3mr: Fix performance regression caused by extended IRQ poll sleep Ranjan Kumar
2026-06-26 12:02 ` sashiko-bot
2026-06-26 11:41 ` [PATCH v1 06/10] mpi3mr: Fix memory leak on operational queue creation failure Ranjan Kumar
2026-06-26 12:02 ` sashiko-bot
2026-06-26 11:41 ` [PATCH v1 07/10] mpi3mr: Fix firmware event reference leak during cleanup Ranjan Kumar
2026-06-26 12:03 ` sashiko-bot
2026-06-26 11:41 ` [PATCH v1 08/10] mpi3mr: Fix SAS port allocation and registration error handling Ranjan Kumar
2026-06-26 12:06 ` sashiko-bot
2026-06-26 11:41 ` [PATCH v1 09/10] mpi3mr: Fix SAS PHY cleanup in host addition error paths Ranjan Kumar
2026-06-26 12:16 ` sashiko-bot
2026-06-26 11:41 ` [PATCH v1 10/10] mpi3mr: Driver version update to 8.18.0.8.50 Ranjan Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260626114109.43685-2-ranjan.kumar@broadcom.com \
--to=ranjan.kumar@broadcom.com \
--cc=chandrakanth.patil@broadcom.com \
--cc=ipylypiv@google.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=sathya.prakash@broadcom.com \
--cc=vishakhavc@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.