From: sashiko-bot@kernel.org
To: "Stefan Dösinger" <stefandoesinger@gmail.com>
Cc: lee@kernel.org, devicetree@vger.kernel.org, mfd@lists.linux.dev,
vkoul@kernel.org, conor+dt@kernel.org, robh@kernel.org,
neil.armstrong@linaro.org, olteanv@gmail.com,
linux-phy@lists.infradead.org
Subject: Re: [PATCH v8 08/12] clk: zte: Introduce a driver for zx297520v3 top clocks
Date: Mon, 27 Jul 2026 19:29:23 +0000 [thread overview]
Message-ID: <20260727192924.5D1231F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260727-zx29clk-v8-8-7a107b00f1dd@gmail.com>
> This register space controls core devices: PLLs, the AHB bus, a lot of
> timers, the USB controller, the Cortex M0 processor that boots the board
> and a few other devices. For some reason the LTE coprocessor is also
> partially controlled by it. The main application processor and DDR
> memory are not found here though.
>
> The register to reboot the board is found here, as well as a register to
> control whether watchdog expiries cause a board reset.
>
> Signed-off-by: Stefan Dösinger <stefandoesinger@gmail.com>
Sashiko has reviewed this patch and found no issues. It looks great!
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260727-zx29clk-v8-0-7a107b00f1dd@gmail.com?part=8
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: sashiko-bot@kernel.org
To: "Stefan Dösinger" <stefandoesinger@gmail.com>
Cc: lee@kernel.org, devicetree@vger.kernel.org, mfd@lists.linux.dev,
vkoul@kernel.org, conor+dt@kernel.org, robh@kernel.org,
neil.armstrong@linaro.org, olteanv@gmail.com,
linux-phy@lists.infradead.org
Subject: Re: [PATCH v8 08/12] clk: zte: Introduce a driver for zx297520v3 top clocks
Date: Mon, 27 Jul 2026 19:29:23 +0000 [thread overview]
Message-ID: <20260727192924.5D1231F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260727-zx29clk-v8-8-7a107b00f1dd@gmail.com>
> This register space controls core devices: PLLs, the AHB bus, a lot of
> timers, the USB controller, the Cortex M0 processor that boots the board
> and a few other devices. For some reason the LTE coprocessor is also
> partially controlled by it. The main application processor and DDR
> memory are not found here though.
>
> The register to reboot the board is found here, as well as a register to
> control whether watchdog expiries cause a board reset.
>
> Signed-off-by: Stefan Dösinger <stefandoesinger@gmail.com>
Sashiko has reviewed this patch and found no issues. It looks great!
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260727-zx29clk-v8-0-7a107b00f1dd@gmail.com?part=8
next prev parent reply other threads:[~2026-07-27 19:29 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-27 18:24 [PATCH v8 00/12] ZTE zx297520v3 clock bindings and driver Stefan Dösinger
2026-07-27 18:24 ` Stefan Dösinger
2026-07-27 18:24 ` [PATCH v8 01/12] dt-bindings: clk: zte: Add zx297520v3 top clock and reset controller Stefan Dösinger
2026-07-27 18:24 ` Stefan Dösinger
2026-07-27 18:32 ` sashiko-bot
2026-07-27 18:32 ` sashiko-bot
2026-07-27 18:24 ` [PATCH v8 02/12] dt-bindings: clk: zte: Add zx297520v3 matrix " Stefan Dösinger
2026-07-27 18:24 ` Stefan Dösinger
2026-07-27 18:34 ` sashiko-bot
2026-07-27 18:34 ` sashiko-bot
2026-07-27 18:24 ` [PATCH v8 03/12] dt-bindings: clk: zte: Add zx297520v3 LSP " Stefan Dösinger
2026-07-27 18:24 ` Stefan Dösinger
2026-07-27 18:36 ` sashiko-bot
2026-07-27 18:36 ` sashiko-bot
2026-07-27 18:24 ` [PATCH v8 04/12] mfd: zx297520v3: Add a clock and reset MFD driver Stefan Dösinger
2026-07-27 18:24 ` Stefan Dösinger
2026-07-27 18:41 ` sashiko-bot
2026-07-27 18:41 ` sashiko-bot
2026-07-27 18:24 ` [PATCH v8 05/12] clk: zte: Add Clock registration infrastructure Stefan Dösinger
2026-07-27 18:24 ` Stefan Dösinger
2026-07-27 18:52 ` sashiko-bot
2026-07-27 18:52 ` sashiko-bot
2026-07-27 18:24 ` [PATCH v8 06/12] clk: zte: Add regmap-based clocks Stefan Dösinger
2026-07-27 18:24 ` Stefan Dösinger
2026-07-27 19:03 ` sashiko-bot
2026-07-27 19:03 ` sashiko-bot
2026-07-27 18:24 ` [PATCH v8 07/12] clk: zte: Add zx PLL support infrastructure Stefan Dösinger
2026-07-27 18:24 ` Stefan Dösinger
2026-07-27 19:15 ` sashiko-bot
2026-07-27 19:15 ` sashiko-bot
2026-07-27 18:24 ` [PATCH v8 08/12] clk: zte: Introduce a driver for zx297520v3 top clocks Stefan Dösinger
2026-07-27 18:24 ` Stefan Dösinger
2026-07-27 19:29 ` sashiko-bot [this message]
2026-07-27 19:29 ` sashiko-bot
2026-07-27 18:24 ` [PATCH v8 09/12] clk: zte: Introduce a driver for zx297520v3 matrix clocks Stefan Dösinger
2026-07-27 18:24 ` Stefan Dösinger
2026-07-27 19:41 ` sashiko-bot
2026-07-27 19:41 ` sashiko-bot
2026-07-27 18:24 ` [PATCH v8 10/12] clk: zte: Introduce a driver for zx297520v3 LSP clocks Stefan Dösinger
2026-07-27 18:24 ` Stefan Dösinger
2026-07-27 19:46 ` sashiko-bot
2026-07-27 19:46 ` sashiko-bot
2026-07-27 18:24 ` [PATCH v8 11/12] reset: zte: Add a zx297520v3 reset driver Stefan Dösinger
2026-07-27 18:24 ` Stefan Dösinger
2026-07-27 19:59 ` sashiko-bot
2026-07-27 19:59 ` sashiko-bot
2026-07-27 18:24 ` [PATCH v8 12/12] ARM: dts: zte: Declare zx297520v3 CRM device nodes Stefan Dösinger
2026-07-27 18:24 ` Stefan Dösinger
2026-07-27 20:13 ` sashiko-bot
2026-07-27 20:13 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260727192924.5D1231F000E9@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lee@kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=mfd@lists.linux.dev \
--cc=neil.armstrong@linaro.org \
--cc=olteanv@gmail.com \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=stefandoesinger@gmail.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.