[RFC PATCH v6 8/9] arm64: dts: rockchip: rk3576: add NPU (RKNN) nodes

From: Jiaxing Hu <gahing@gahingwoo.com>
To: tomeu@tomeuvizoso.net, heiko@sntech.de, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, joro@8bytes.org,
	will@kernel.org, robin.murphy@arm.com, ulfh@kernel.org,
	p.zabel@pengutronix.de, ogabbay@kernel.org,
	zhangqing@rock-chips.com
Cc: royalnet026@gmail.com, alchark@flipper.net,
	chaoyi.chen@rock-chips.com, diederik@cknow-tech.com,
	dri-devel@lists.freedesktop.org,
	linux-rockchip@lists.infradead.org, iommu@lists.linux.dev,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Jiaxing Hu <gahing@gahingwoo.com>
Subject: [RFC PATCH v6 8/9] arm64: dts: rockchip: rk3576: add NPU (RKNN) nodes
Date: Thu,  6 Aug 2026 18:34:12 +1200	[thread overview]
Message-ID: <20260806063413.350184-9-gahing@gahingwoo.com> (raw)
In-Reply-To: <20260806063413.350184-1-gahing@gahingwoo.com>

Add the two RKNN cores and their IOMMUs, plus the NPU power-domain
resets the pmdomain driver now cycles on power-on. Both cores are
disabled by default; boards enable what they wire up.

Each core lists both NPU power domains, its own first. The compute path
needs NPU1 powered even when only core 0 runs, and a node with a single
domain would be auto-attached by the driver core before the driver can
attach the list itself. The IOMMUs keep one domain each, since they rely
on that same auto-attach.

Signed-off-by: Jiaxing Hu <gahing@gahingwoo.com>
---
 arch/arm64/boot/dts/rockchip/rk3576.dtsi | 80 +++++++++++++++++++++++-
 1 file changed, 78 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index b0c0d3c8b..1e6dd039f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -1070,14 +1070,22 @@ power-domain@RK3576_PD_NPUTOP {
 						power-domain@RK3576_PD_NPU0 {
 							reg = <RK3576_PD_NPU0>;
 							clocks = <&cru HCLK_RKNN_ROOT>,
-								 <&cru ACLK_RKNN0>;
+								 <&cru ACLK_RKNN0>,
+								 <&cru CLK_RKNN_DSU0>,
+								 <&cru ACLK_RKNN_CBUF>,
+								 <&cru HCLK_RKNN_CBUF>;
+							resets = <&cru SRST_A_RKNN0_BIU>;
 							pm_qos = <&qos_npu_m0>;
 							#power-domain-cells = <0>;
 						};
 						power-domain@RK3576_PD_NPU1 {
 							reg = <RK3576_PD_NPU1>;
 							clocks = <&cru HCLK_RKNN_ROOT>,
-								 <&cru ACLK_RKNN1>;
+								 <&cru ACLK_RKNN1>,
+								 <&cru CLK_RKNN_DSU0>,
+								 <&cru ACLK_RKNN_CBUF>,
+								 <&cru HCLK_RKNN_CBUF>;
+							resets = <&cru SRST_A_RKNN1_BIU>;
 							pm_qos = <&qos_npu_m1>;
 							#power-domain-cells = <0>;
 						};
@@ -1832,6 +1840,74 @@ qos_npu_m1ro: qos@27f22100 {
 			reg = <0x0 0x27f22100 0x0 0x20>;
 		};
 
+		rknn_core_0: npu@27700000 {
+			compatible = "rockchip,rk3576-rknn-core";
+			reg = <0x0 0x27700000 0x0 0x1000>,
+			      <0x0 0x27701000 0x0 0x1000>,
+			      <0x0 0x27703000 0x0 0x1000>;
+			reg-names = "pc", "cna", "core";
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru ACLK_RKNN0>, <&cru HCLK_RKNN_ROOT>,
+				 <&cru CLK_RKNN_DSU0>, <&cru PCLK_NPUTOP_ROOT>,
+				 <&cru ACLK_RKNN_CBUF>, <&cru HCLK_RKNN_CBUF>;
+			clock-names = "aclk", "hclk", "npu", "pclk",
+				      "aclk_cbuf", "hclk_cbuf";
+			resets = <&cru SRST_A_RKNN0>;
+			reset-names = "srst_a";
+			power-domains = <&power RK3576_PD_NPU0>, <&power RK3576_PD_NPU1>;
+			iommus = <&rknn_mmu_0>;
+			status = "disabled";
+		};
+
+		rknn_mmu_0: iommu@27702000 {
+			compatible = "rockchip,rk3576-iommu", "rockchip,rk3568-iommu";
+			reg = <0x0 0x27702000 0x0 0x100>,
+			      <0x0 0x27702100 0x0 0x100>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru ACLK_RKNN0>, <&cru HCLK_RKNN_ROOT>,
+				 <&cru CLK_RKNN_DSU0>, <&cru ACLK_RKNN_CBUF>,
+				 <&cru HCLK_RKNN_CBUF>;
+			clock-names = "aclk", "iface", "npu",
+				      "aclk_cbuf", "hclk_cbuf";
+			#iommu-cells = <0>;
+			power-domains = <&power RK3576_PD_NPU0>;
+			status = "disabled";
+		};
+
+		rknn_core_1: npu@27708000 {
+			compatible = "rockchip,rk3576-rknn-core";
+			reg = <0x0 0x27708000 0x0 0x1000>,
+			      <0x0 0x27709000 0x0 0x1000>,
+			      <0x0 0x2770b000 0x0 0x1000>;
+			reg-names = "pc", "cna", "core";
+			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru ACLK_RKNN1>, <&cru HCLK_RKNN_ROOT>,
+				 <&cru CLK_RKNN_DSU0>, <&cru PCLK_NPUTOP_ROOT>,
+				 <&cru ACLK_RKNN_CBUF>, <&cru HCLK_RKNN_CBUF>;
+			clock-names = "aclk", "hclk", "npu", "pclk",
+				      "aclk_cbuf", "hclk_cbuf";
+			resets = <&cru SRST_A_RKNN1>;
+			reset-names = "srst_a";
+			power-domains = <&power RK3576_PD_NPU1>, <&power RK3576_PD_NPU0>;
+			iommus = <&rknn_mmu_1>;
+			status = "disabled";
+		};
+
+		rknn_mmu_1: iommu@2770a000 {
+			compatible = "rockchip,rk3576-iommu", "rockchip,rk3568-iommu";
+			reg = <0x0 0x2770a000 0x0 0x100>,
+			      <0x0 0x2770a100 0x0 0x100>;
+			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru ACLK_RKNN1>, <&cru HCLK_RKNN_ROOT>,
+				 <&cru CLK_RKNN_DSU0>, <&cru ACLK_RKNN_CBUF>,
+				 <&cru HCLK_RKNN_CBUF>;
+			clock-names = "aclk", "iface", "npu",
+				      "aclk_cbuf", "hclk_cbuf";
+			#iommu-cells = <0>;
+			power-domains = <&power RK3576_PD_NPU1>;
+			status = "disabled";
+		};
+
 		gmac0: ethernet@2a220000 {
 			compatible = "rockchip,rk3576-gmac", "snps,dwmac-4.20a";
 			reg = <0x0 0x2a220000 0x0 0x10000>;
-- 
2.43.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
