From: Dave Jiang <dave.jiang@intel.com>
To: linux-acpi@vger.kernel.org, linux-cxl@vger.kernel.org
Cc: rafael@kernel.org, tony.luck@intel.com, bp@alien8.de,
guohanjun@huawei.com, mchehab@kernel.org,
xueshuai@linux.alibaba.com, terry.bowman@amd.com,
benjamin.cheatham@amd.com, alison.schofield@intel.com,
sashiko-bot@kernel.org
Subject: [PATCH v5 10/13] efi/cper: Read only validated fields in cper_mem_err_pack()
Date: Thu, 27 Aug 2026 13:37:23 -0700 [thread overview]
Message-ID: <20260827203726.3027541-11-dave.jiang@intel.com> (raw)
In-Reply-To: <20260827203726.3027541-1-dave.jiang@intel.com>
cper_mem_err_pack() copies extended, rank, mem_array_handle and
mem_dev_handle unconditionally. Those live at offsets 73 to 79, past the
end of struct cper_sec_mem_err_old, the 73-byte UEFI 2.1/2.2 layout that
older firmware still emits and that cper_estatus_print_section() admits.
On such a record the copy reads up to seven bytes past the payload, and off
the end of the error status block when that section is the last one.
Copy each of the four only when its validation bit is set, and zero it
otherwise. Nothing is lost: a 2.1/2.2 record leaves those bits clear, and
every consumer of struct cper_mem_err_compact already gates the fields on
the same bits. Zeroing also stops callers reading them back out of the
uninitialised on-stack struct they pass in.
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260714231835.303081-1-dave.jiang@intel.com?part=7
Fixes: 2dfb7d51a61d ("trace, RAS: Add eMCA trace event interface")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---
drivers/firmware/efi/cper.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index 3dcef618ad39..13b3e72c3b62 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -389,10 +389,28 @@ void cper_mem_err_pack(const struct cper_sec_mem_err *mem,
cmem->requestor_id = mem->requestor_id;
cmem->responder_id = mem->responder_id;
cmem->target_id = mem->target_id;
- cmem->extended = mem->extended;
- cmem->rank = mem->rank;
- cmem->mem_array_handle = mem->mem_array_handle;
- cmem->mem_dev_handle = mem->mem_dev_handle;
+
+ /*
+ * These four sit past the end of the UEFI 2.1/2.2 layout, which older
+ * firmware still emits, so reading them unconditionally runs off a
+ * short record. Every consumer of the compact record gates them on the
+ * same validation bits, so leave them zero when firmware does not
+ * claim them.
+ */
+ cmem->extended = 0;
+ cmem->rank = 0;
+ cmem->mem_array_handle = 0;
+ cmem->mem_dev_handle = 0;
+
+ if (mem->validation_bits &
+ (CPER_MEM_VALID_ROW_EXT | CPER_MEM_VALID_CHIP_ID))
+ cmem->extended = mem->extended;
+ if (mem->validation_bits & CPER_MEM_VALID_RANK_NUMBER)
+ cmem->rank = mem->rank;
+ if (mem->validation_bits & CPER_MEM_VALID_CARD_HANDLE)
+ cmem->mem_array_handle = mem->mem_array_handle;
+ if (mem->validation_bits & CPER_MEM_VALID_MODULE_HANDLE)
+ cmem->mem_dev_handle = mem->mem_dev_handle;
}
EXPORT_SYMBOL_GPL(cper_mem_err_pack);
--
2.54.0
next prev parent reply other threads:[~2026-08-27 20:37 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-27 20:37 [PATCH v5 00/13] ACPI: APEI: GHES: Collection of fixes for issues reported by sashiko Dave Jiang
2026-08-27 20:37 ` [PATCH v5 01/13] efi/cper: Reject CPER records with an out-of-range error_data_length Dave Jiang
2026-08-27 20:52 ` sashiko-bot
2026-08-27 20:37 ` [PATCH v5 02/13] efi/cper: Reject an error status block length that wraps a u32 Dave Jiang
2026-08-27 20:52 ` sashiko-bot
2026-08-27 20:37 ` [PATCH v5 03/13] ACPI: extlog: Validate elog record length before walking sections Dave Jiang
2026-08-27 20:55 ` sashiko-bot
2026-08-27 20:37 ` [PATCH v5 04/13] ACPI: extlog: Defer CXL protocol error handling to avoid lock inversion Dave Jiang
2026-08-27 20:55 ` sashiko-bot
2026-08-27 20:37 ` [PATCH v5 05/13] ACPI: extlog: Avoid populating software AER metadata from raw hardware buffer Dave Jiang
2026-08-27 20:58 ` sashiko-bot
2026-08-27 23:06 ` Dave Jiang
2026-08-27 20:37 ` [PATCH v5 06/13] ACPI: extlog: Validate PCIe error section length before payload access Dave Jiang
2026-08-27 20:37 ` [PATCH v5 07/13] ACPI: extlog: Fix CONFIG_ACPI_APEI_PCIEAER guard typo Dave Jiang
2026-08-27 20:37 ` [PATCH v5 08/13] ACPI: APEI: GHES: Bound CXL event record copy to the firmware section length Dave Jiang
2026-08-27 20:55 ` sashiko-bot
2026-08-27 20:37 ` [PATCH v5 09/13] ACPI: APEI: GHES: Validate CXL protocol error section length before RAS cap copy Dave Jiang
2026-08-27 20:53 ` sashiko-bot
2026-08-27 20:37 ` Dave Jiang [this message]
2026-08-27 20:55 ` [PATCH v5 10/13] efi/cper: Read only validated fields in cper_mem_err_pack() sashiko-bot
2026-08-27 20:37 ` [PATCH v5 11/13] ACPI: APEI: GHES: Validate memory error section length before payload access Dave Jiang
2026-08-27 21:05 ` sashiko-bot
2026-08-27 20:37 ` [PATCH v5 12/13] ACPI: APEI: GHES: Bound AER info copy and sanitize software metadata Dave Jiang
2026-08-27 21:01 ` sashiko-bot
2026-08-27 20:37 ` [PATCH v5 13/13] cxl/ras: Make cxl_cper_handle_prot_err() static Dave Jiang
2026-08-27 20:59 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260827203726.3027541-11-dave.jiang@intel.com \
--to=dave.jiang@intel.com \
--cc=alison.schofield@intel.com \
--cc=benjamin.cheatham@amd.com \
--cc=bp@alien8.de \
--cc=guohanjun@huawei.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rafael@kernel.org \
--cc=sashiko-bot@kernel.org \
--cc=terry.bowman@amd.com \
--cc=tony.luck@intel.com \
--cc=xueshuai@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.