From: Dave Jiang <dave.jiang@intel.com>
To: linux-acpi@vger.kernel.org, linux-cxl@vger.kernel.org
Cc: rafael@kernel.org, tony.luck@intel.com, bp@alien8.de,
guohanjun@huawei.com, mchehab@kernel.org,
xueshuai@linux.alibaba.com, terry.bowman@amd.com,
benjamin.cheatham@amd.com, alison.schofield@intel.com,
sashiko-bot@kernel.org
Subject: [PATCH v5 01/13] efi/cper: Reject CPER records with an out-of-range error_data_length
Date: Thu, 27 Aug 2026 13:37:14 -0700 [thread overview]
Message-ID: <20260827203726.3027541-2-dave.jiang@intel.com> (raw)
In-Reply-To: <20260827203726.3027541-1-dave.jiang@intel.com>
cper_estatus_check() sizes each section with acpi_hest_get_record_size(),
which adds the firmware-controlled u32 error_data_length to the header size
as a signed int (see <acpi/ghes.h>). A value in the top sizeof(*gdata)
bytes of the u32 range wraps the sum small rather than large, so it slips
past the "record_size > data_len" check: against the 72-byte v300 header,
0xffffffb9 sizes the record at 1 and acpi_hest_get_next() walks it a byte
at a time, off the end. 0xffffffb8 sizes it at 0 and loops forever.
Use check_add_overflow() to reject a sum that will not fit the int those
helpers return, since the walk advances by that value. That subsumes the
"acpi_hest_get_size(gdata) > data_len" test above it, because record_size
is never smaller than the header.
The later "len < sizeof(*foo)" guards rely on this per-section upper bound;
they are lower bounds only.
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260714231835.303081-1-dave.jiang@intel.com?part=1
Fixes: 45b14a4ffcc1 ("efi: cper: Fix possible out-of-bounds access")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---
v5:
- Use check_add_overflow() rather than a u64 sum plus an INT_MAX test, and
drop the now-redundant acpi_hest_get_size() bound (Jonathan Cameron).
---
drivers/firmware/efi/cper.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index 06b4fdb59917..332c78f2d561 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -752,7 +752,7 @@ EXPORT_SYMBOL_GPL(cper_estatus_check_header);
int cper_estatus_check(const struct acpi_hest_generic_status *estatus)
{
struct acpi_hest_generic_data *gdata;
- unsigned int data_len, record_size;
+ unsigned int data_len;
int rc;
rc = cper_estatus_check_header(estatus);
@@ -762,10 +762,18 @@ int cper_estatus_check(const struct acpi_hest_generic_status *estatus)
data_len = estatus->data_length;
apei_estatus_for_each_section(estatus, gdata) {
- if (acpi_hest_get_size(gdata) > data_len)
+ int record_size;
+
+ /*
+ * The <acpi/ghes.h> helpers sum these as a signed int, so a
+ * huge error_data_length wraps small rather than large and the
+ * walk then advances by that wrapped value. Reject a size an
+ * int cannot carry.
+ */
+ if (check_add_overflow(acpi_hest_get_size(gdata),
+ gdata->error_data_length, &record_size))
return -EINVAL;
- record_size = acpi_hest_get_record_size(gdata);
if (record_size > data_len)
return -EINVAL;
--
2.54.0
next prev parent reply other threads:[~2026-08-27 20:37 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-27 20:37 [PATCH v5 00/13] ACPI: APEI: GHES: Collection of fixes for issues reported by sashiko Dave Jiang
2026-08-27 20:37 ` Dave Jiang [this message]
2026-08-27 20:52 ` [PATCH v5 01/13] efi/cper: Reject CPER records with an out-of-range error_data_length sashiko-bot
2026-08-27 20:37 ` [PATCH v5 02/13] efi/cper: Reject an error status block length that wraps a u32 Dave Jiang
2026-08-27 20:52 ` sashiko-bot
2026-08-27 20:37 ` [PATCH v5 03/13] ACPI: extlog: Validate elog record length before walking sections Dave Jiang
2026-08-27 20:55 ` sashiko-bot
2026-08-27 20:37 ` [PATCH v5 04/13] ACPI: extlog: Defer CXL protocol error handling to avoid lock inversion Dave Jiang
2026-08-27 20:55 ` sashiko-bot
2026-08-27 20:37 ` [PATCH v5 05/13] ACPI: extlog: Avoid populating software AER metadata from raw hardware buffer Dave Jiang
2026-08-27 20:58 ` sashiko-bot
2026-08-27 23:06 ` Dave Jiang
2026-08-27 20:37 ` [PATCH v5 06/13] ACPI: extlog: Validate PCIe error section length before payload access Dave Jiang
2026-08-27 20:37 ` [PATCH v5 07/13] ACPI: extlog: Fix CONFIG_ACPI_APEI_PCIEAER guard typo Dave Jiang
2026-08-27 20:37 ` [PATCH v5 08/13] ACPI: APEI: GHES: Bound CXL event record copy to the firmware section length Dave Jiang
2026-08-27 20:55 ` sashiko-bot
2026-08-27 20:37 ` [PATCH v5 09/13] ACPI: APEI: GHES: Validate CXL protocol error section length before RAS cap copy Dave Jiang
2026-08-27 20:53 ` sashiko-bot
2026-08-27 20:37 ` [PATCH v5 10/13] efi/cper: Read only validated fields in cper_mem_err_pack() Dave Jiang
2026-08-27 20:55 ` sashiko-bot
2026-08-27 20:37 ` [PATCH v5 11/13] ACPI: APEI: GHES: Validate memory error section length before payload access Dave Jiang
2026-08-27 21:05 ` sashiko-bot
2026-08-27 20:37 ` [PATCH v5 12/13] ACPI: APEI: GHES: Bound AER info copy and sanitize software metadata Dave Jiang
2026-08-27 21:01 ` sashiko-bot
2026-08-27 20:37 ` [PATCH v5 13/13] cxl/ras: Make cxl_cper_handle_prot_err() static Dave Jiang
2026-08-27 20:59 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260827203726.3027541-2-dave.jiang@intel.com \
--to=dave.jiang@intel.com \
--cc=alison.schofield@intel.com \
--cc=benjamin.cheatham@amd.com \
--cc=bp@alien8.de \
--cc=guohanjun@huawei.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rafael@kernel.org \
--cc=sashiko-bot@kernel.org \
--cc=terry.bowman@amd.com \
--cc=tony.luck@intel.com \
--cc=xueshuai@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.