From: Changhuang Liang <changhuang.liang@starfivetech.com>
To: Linus Walleij <linusw@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Emil Renner Berthing <kernel@esmil.dk>,
Paul Walmsley <pjw@kernel.org>, Albert Ou <aou@eecs.berkeley.edu>,
Palmer Dabbelt <palmer@dabbelt.com>,
Alexandre Ghiti <alex@ghiti.fr>,
Philipp Zabel <p.zabel@pengutronix.de>,
Bartosz Golaszewski <brgl@kernel.org>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
Lianfeng Ouyang <lianfeng.ouyang@starfivetech.com>,
Changhuang Liang <changhuang.liang@starfivetech.com>
Subject: [PATCH v8 00/22] Add basic pinctrl drivers for JHB100 SoC
Date: Thu, 10 Sep 2026 03:03:35 -0700 [thread overview]
Message-ID: <20260910100357.130134-1-changhuang.liang@starfivetech.com> (raw)
The JHB100 SoC has 13 pinctrl domains - sys0, sys0h, sys1, sys2, per0, per1,
per2, per2pok, per3, adc0, adc1, emmc, and vga.
In the current series, we will only add the following pinctrl:
- sys0, sys0h, sys1, sys2
- per0, per1, per2, per2pok, per3
The remaining pinctrl will be implemented in future series.
This series depends on the series:
https://lore.kernel.org/all/20260508053632.818548-1-changhuang.liang@starfivetech.com/
Change since v7:
Add a new patch 21.
PATCH 3/5/7/9/11/13/15/17/19:
- Delete the file starfive,jhb100-pinctrl.h in the
binding directory.
PATCH 4/6/8/9/10/12/14/16/18/20:
- Add definitions specific to .c files
v7: https://lore.kernel.org/all/20260831113514.66382-1-changhuang.liang@starfivetech.com/
v6: https://lore.kernel.org/all/20260829025720.23915-1-changhuang.liang@starfivetech.com/
v5: https://lore.kernel.org/all/20260810063650.239303-1-changhuang.liang@starfivetech.com/
v4: https://lore.kernel.org/all/20260801072711.153217-1-changhuang.liang@starfivetech.com/
v3: https://lore.kernel.org/all/20260603055347.66845-1-changhuang.liang@starfivetech.com/
v2: https://lore.kernel.org/all/20260514111218.94519-1-changhuang.liang@starfivetech.com/
v1: https://lore.kernel.org/all/20260424111330.702272-1-changhuang.liang@starfivetech.com/
Changhuang Liang (22):
dt-bindings: pincfg-node: Add property 'input-debounce-ns'
pinctrl: pinconf-generic: Add property 'input-debounce-ns'
dt-bindings: pinctrl: Add starfive,jhb100-sys0-pinctrl
pinctrl: starfive: Add StarFive JHB100 sys0 controller driver
dt-bindings: pinctrl: Add starfive,jhb100-sys0h-pinctrl
pinctrl: starfive: Add StarFive JHB100 sys0h controller driver
dt-bindings: pinctrl: Add starfive,jhb100-sys1-pinctrl
pinctrl: starfive: Add StarFive JHB100 sys1 controller driver
dt-bindings: pinctrl: Add starfive,jhb100-sys2-pinctrl
pinctrl: starfive: Add StarFive JHB100 sys2 controller driver
dt-bindings: pinctrl: Add starfive,jhb100-per0-pinctrl
pinctrl: starfive: Add StarFive JHB100 per0 controller driver
dt-bindings: pinctrl: Add starfive,jhb100-per1-pinctrl
pinctrl: starfive: Add StarFive JHB100 per1 controller driver
dt-bindings: pinctrl: Add starfive,jhb100-per2-pinctrl
pinctrl: starfive: Add StarFive JHB100 per2 controller driver
dt-bindings: pinctrl: Add starfive,jhb100-per2pok-pinctrl
pinctrl: starfive: Add StarFive JHB100 per2pok controller driver
dt-bindings: pinctrl: Add starfive,jhb100-per3-pinctrl
pinctrl: starfive: Add StarFive JHB100 per3 controller driver
riscv: dts: starfive: Add JHB100 pinctrl pad number header
riscv: dts: starfive: jhb100: Add pinctrl nodes
.../bindings/pinctrl/pincfg-node.yaml | 11 +
.../pinctrl/starfive,jhb100-per0-pinctrl.yaml | 179 ++
.../pinctrl/starfive,jhb100-per1-pinctrl.yaml | 178 ++
.../pinctrl/starfive,jhb100-per2-pinctrl.yaml | 168 ++
.../starfive,jhb100-per2pok-pinctrl.yaml | 162 ++
.../pinctrl/starfive,jhb100-per3-pinctrl.yaml | 166 ++
.../pinctrl/starfive,jhb100-sys0-pinctrl.yaml | 164 ++
.../starfive,jhb100-sys0h-pinctrl.yaml | 162 ++
.../pinctrl/starfive,jhb100-sys1-pinctrl.yaml | 164 ++
.../pinctrl/starfive,jhb100-sys2-pinctrl.yaml | 165 ++
MAINTAINERS | 9 +
arch/riscv/boot/dts/starfive/jhb100-evb1.dts | 3 +
.../boot/dts/starfive/jhb100-pinctrl.dtsi | 23 +
arch/riscv/boot/dts/starfive/jhb100.dtsi | 107 ++
.../dts/starfive/starfive,jhb100-pinctrl.h | 247 +++
drivers/pinctrl/pinconf-generic.c | 2 +
drivers/pinctrl/starfive/Kconfig | 107 ++
drivers/pinctrl/starfive/Makefile | 11 +
.../starfive/pinctrl-starfive-jhb100-per0.c | 182 +++
.../starfive/pinctrl-starfive-jhb100-per1.c | 193 +++
.../starfive/pinctrl-starfive-jhb100-per2.c | 136 ++
.../pinctrl-starfive-jhb100-per2pok.c | 99 ++
.../starfive/pinctrl-starfive-jhb100-per3.c | 129 ++
.../starfive/pinctrl-starfive-jhb100-sys0.c | 121 ++
.../starfive/pinctrl-starfive-jhb100-sys0h.c | 99 ++
.../starfive/pinctrl-starfive-jhb100-sys1.c | 94 ++
.../starfive/pinctrl-starfive-jhb100-sys2.c | 140 ++
.../starfive/pinctrl-starfive-jhb100.c | 1446 +++++++++++++++++
.../starfive/pinctrl-starfive-jhb100.h | 153 ++
include/linux/pinctrl/pinconf-generic.h | 5 +
30 files changed, 4825 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per0-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per1-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per2-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per2pok-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per3-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys0-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys0h-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys1-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys2-pinctrl.yaml
create mode 100644 arch/riscv/boot/dts/starfive/jhb100-pinctrl.dtsi
create mode 100644 arch/riscv/boot/dts/starfive/starfive,jhb100-pinctrl.h
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per0.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per1.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per2.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per2pok.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per3.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-sys0.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-sys0h.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-sys1.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-sys2.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100.h
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Changhuang Liang <changhuang.liang@starfivetech.com>
To: Linus Walleij <linusw@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Emil Renner Berthing <kernel@esmil.dk>,
Paul Walmsley <pjw@kernel.org>, Albert Ou <aou@eecs.berkeley.edu>,
Palmer Dabbelt <palmer@dabbelt.com>,
Alexandre Ghiti <alex@ghiti.fr>,
Philipp Zabel <p.zabel@pengutronix.de>,
Bartosz Golaszewski <brgl@kernel.org>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
Lianfeng Ouyang <lianfeng.ouyang@starfivetech.com>,
Changhuang Liang <changhuang.liang@starfivetech.com>
Subject: [PATCH v8 00/22] Add basic pinctrl drivers for JHB100 SoC
Date: Thu, 10 Sep 2026 03:03:35 -0700 [thread overview]
Message-ID: <20260910100357.130134-1-changhuang.liang@starfivetech.com> (raw)
The JHB100 SoC has 13 pinctrl domains - sys0, sys0h, sys1, sys2, per0, per1,
per2, per2pok, per3, adc0, adc1, emmc, and vga.
In the current series, we will only add the following pinctrl:
- sys0, sys0h, sys1, sys2
- per0, per1, per2, per2pok, per3
The remaining pinctrl will be implemented in future series.
This series depends on the series:
https://lore.kernel.org/all/20260508053632.818548-1-changhuang.liang@starfivetech.com/
Change since v7:
Add a new patch 21.
PATCH 3/5/7/9/11/13/15/17/19:
- Delete the file starfive,jhb100-pinctrl.h in the
binding directory.
PATCH 4/6/8/9/10/12/14/16/18/20:
- Add definitions specific to .c files
v7: https://lore.kernel.org/all/20260831113514.66382-1-changhuang.liang@starfivetech.com/
v6: https://lore.kernel.org/all/20260829025720.23915-1-changhuang.liang@starfivetech.com/
v5: https://lore.kernel.org/all/20260810063650.239303-1-changhuang.liang@starfivetech.com/
v4: https://lore.kernel.org/all/20260801072711.153217-1-changhuang.liang@starfivetech.com/
v3: https://lore.kernel.org/all/20260603055347.66845-1-changhuang.liang@starfivetech.com/
v2: https://lore.kernel.org/all/20260514111218.94519-1-changhuang.liang@starfivetech.com/
v1: https://lore.kernel.org/all/20260424111330.702272-1-changhuang.liang@starfivetech.com/
Changhuang Liang (22):
dt-bindings: pincfg-node: Add property 'input-debounce-ns'
pinctrl: pinconf-generic: Add property 'input-debounce-ns'
dt-bindings: pinctrl: Add starfive,jhb100-sys0-pinctrl
pinctrl: starfive: Add StarFive JHB100 sys0 controller driver
dt-bindings: pinctrl: Add starfive,jhb100-sys0h-pinctrl
pinctrl: starfive: Add StarFive JHB100 sys0h controller driver
dt-bindings: pinctrl: Add starfive,jhb100-sys1-pinctrl
pinctrl: starfive: Add StarFive JHB100 sys1 controller driver
dt-bindings: pinctrl: Add starfive,jhb100-sys2-pinctrl
pinctrl: starfive: Add StarFive JHB100 sys2 controller driver
dt-bindings: pinctrl: Add starfive,jhb100-per0-pinctrl
pinctrl: starfive: Add StarFive JHB100 per0 controller driver
dt-bindings: pinctrl: Add starfive,jhb100-per1-pinctrl
pinctrl: starfive: Add StarFive JHB100 per1 controller driver
dt-bindings: pinctrl: Add starfive,jhb100-per2-pinctrl
pinctrl: starfive: Add StarFive JHB100 per2 controller driver
dt-bindings: pinctrl: Add starfive,jhb100-per2pok-pinctrl
pinctrl: starfive: Add StarFive JHB100 per2pok controller driver
dt-bindings: pinctrl: Add starfive,jhb100-per3-pinctrl
pinctrl: starfive: Add StarFive JHB100 per3 controller driver
riscv: dts: starfive: Add JHB100 pinctrl pad number header
riscv: dts: starfive: jhb100: Add pinctrl nodes
.../bindings/pinctrl/pincfg-node.yaml | 11 +
.../pinctrl/starfive,jhb100-per0-pinctrl.yaml | 179 ++
.../pinctrl/starfive,jhb100-per1-pinctrl.yaml | 178 ++
.../pinctrl/starfive,jhb100-per2-pinctrl.yaml | 168 ++
.../starfive,jhb100-per2pok-pinctrl.yaml | 162 ++
.../pinctrl/starfive,jhb100-per3-pinctrl.yaml | 166 ++
.../pinctrl/starfive,jhb100-sys0-pinctrl.yaml | 164 ++
.../starfive,jhb100-sys0h-pinctrl.yaml | 162 ++
.../pinctrl/starfive,jhb100-sys1-pinctrl.yaml | 164 ++
.../pinctrl/starfive,jhb100-sys2-pinctrl.yaml | 165 ++
MAINTAINERS | 9 +
arch/riscv/boot/dts/starfive/jhb100-evb1.dts | 3 +
.../boot/dts/starfive/jhb100-pinctrl.dtsi | 23 +
arch/riscv/boot/dts/starfive/jhb100.dtsi | 107 ++
.../dts/starfive/starfive,jhb100-pinctrl.h | 247 +++
drivers/pinctrl/pinconf-generic.c | 2 +
drivers/pinctrl/starfive/Kconfig | 107 ++
drivers/pinctrl/starfive/Makefile | 11 +
.../starfive/pinctrl-starfive-jhb100-per0.c | 182 +++
.../starfive/pinctrl-starfive-jhb100-per1.c | 193 +++
.../starfive/pinctrl-starfive-jhb100-per2.c | 136 ++
.../pinctrl-starfive-jhb100-per2pok.c | 99 ++
.../starfive/pinctrl-starfive-jhb100-per3.c | 129 ++
.../starfive/pinctrl-starfive-jhb100-sys0.c | 121 ++
.../starfive/pinctrl-starfive-jhb100-sys0h.c | 99 ++
.../starfive/pinctrl-starfive-jhb100-sys1.c | 94 ++
.../starfive/pinctrl-starfive-jhb100-sys2.c | 140 ++
.../starfive/pinctrl-starfive-jhb100.c | 1446 +++++++++++++++++
.../starfive/pinctrl-starfive-jhb100.h | 153 ++
include/linux/pinctrl/pinconf-generic.h | 5 +
30 files changed, 4825 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per0-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per1-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per2-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per2pok-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per3-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys0-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys0h-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys1-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys2-pinctrl.yaml
create mode 100644 arch/riscv/boot/dts/starfive/jhb100-pinctrl.dtsi
create mode 100644 arch/riscv/boot/dts/starfive/starfive,jhb100-pinctrl.h
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per0.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per1.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per2.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per2pok.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per3.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-sys0.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-sys0h.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-sys1.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-sys2.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100.h
--
2.25.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next reply other threads:[~2026-09-10 10:04 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-10 10:03 Changhuang Liang [this message]
2026-09-10 10:03 ` [PATCH v8 00/22] Add basic pinctrl drivers for JHB100 SoC Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 01/22] dt-bindings: pincfg-node: Add property 'input-debounce-ns' Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 02/22] pinctrl: pinconf-generic: " Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 03/22] dt-bindings: pinctrl: Add starfive,jhb100-sys0-pinctrl Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-18 18:35 ` Rob Herring (Arm)
2026-09-18 18:35 ` Rob Herring (Arm)
2026-09-10 10:03 ` [PATCH v8 04/22] pinctrl: starfive: Add StarFive JHB100 sys0 controller driver Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 05/22] dt-bindings: pinctrl: Add starfive,jhb100-sys0h-pinctrl Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-18 19:01 ` Rob Herring (Arm)
2026-09-18 19:01 ` Rob Herring (Arm)
2026-09-10 10:03 ` [PATCH v8 06/22] pinctrl: starfive: Add StarFive JHB100 sys0h controller driver Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 07/22] dt-bindings: pinctrl: Add starfive,jhb100-sys1-pinctrl Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-18 18:39 ` Rob Herring (Arm)
2026-09-18 18:39 ` Rob Herring (Arm)
2026-09-10 10:03 ` [PATCH v8 08/22] pinctrl: starfive: Add StarFive JHB100 sys1 controller driver Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 09/22] dt-bindings: pinctrl: Add starfive,jhb100-sys2-pinctrl Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-18 18:39 ` Rob Herring
2026-09-18 18:39 ` Rob Herring
2026-09-10 10:03 ` [PATCH v8 10/22] pinctrl: starfive: Add StarFive JHB100 sys2 controller driver Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 11/22] dt-bindings: pinctrl: Add starfive,jhb100-per0-pinctrl Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-18 19:02 ` Rob Herring (Arm)
2026-09-18 19:02 ` Rob Herring (Arm)
2026-09-10 10:03 ` [PATCH v8 12/22] pinctrl: starfive: Add StarFive JHB100 per0 controller driver Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 13/22] dt-bindings: pinctrl: Add starfive,jhb100-per1-pinctrl Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-18 18:39 ` Rob Herring (Arm)
2026-09-18 18:39 ` Rob Herring (Arm)
2026-09-10 10:03 ` [PATCH v8 14/22] pinctrl: starfive: Add StarFive JHB100 per1 controller driver Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 15/22] dt-bindings: pinctrl: Add starfive,jhb100-per2-pinctrl Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-18 18:40 ` Rob Herring (Arm)
2026-09-18 18:40 ` Rob Herring (Arm)
2026-09-10 10:03 ` [PATCH v8 16/22] pinctrl: starfive: Add StarFive JHB100 per2 controller driver Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 17/22] dt-bindings: pinctrl: Add starfive,jhb100-per2pok-pinctrl Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-18 18:40 ` Rob Herring (Arm)
2026-09-18 18:40 ` Rob Herring (Arm)
2026-09-10 10:03 ` [PATCH v8 18/22] pinctrl: starfive: Add StarFive JHB100 per2pok controller driver Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 19/22] dt-bindings: pinctrl: Add starfive,jhb100-per3-pinctrl Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-18 19:02 ` Rob Herring (Arm)
2026-09-18 19:02 ` Rob Herring (Arm)
2026-09-10 10:03 ` [PATCH v8 20/22] pinctrl: starfive: Add StarFive JHB100 per3 controller driver Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 21/22] riscv: dts: starfive: Add JHB100 pinctrl pad number header Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 22/22] riscv: dts: starfive: jhb100: Add pinctrl nodes Changhuang Liang
2026-09-10 10:03 ` Changhuang Liang
2026-09-30 22:20 ` [PATCH v8 00/22] Add basic pinctrl drivers for JHB100 SoC Linus Walleij
2026-09-30 22:20 ` Linus Walleij
2026-09-30 22:34 ` Conor Dooley
2026-09-30 22:34 ` Conor Dooley
2026-10-01 8:36 ` Linus Walleij
2026-10-01 8:36 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260910100357.130134-1-changhuang.liang@starfivetech.com \
--to=changhuang.liang@starfivetech.com \
--cc=alex@ghiti.fr \
--cc=aou@eecs.berkeley.edu \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@esmil.dk \
--cc=krzk+dt@kernel.org \
--cc=lianfeng.ouyang@starfivetech.com \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.