Re: [PATCH RFC v3 12/12] arm64: dts: s32g: Add S32G3-RDB3 SerDes routing variants

[sashiko-bot@kernel.org]

> From: "Jan Petrous (OSS)" <jan.petrous@oss.nxp.com>
> 
> The S32G3-VNP-RDB3 board wires GMAC0 to an on-board KSZ9031 RGMII PHY by
> default. Add two device tree variants that reroute GMAC0 over the
> SerDes_0 XPCS lane for SGMII, matching the two SerDes lane layouts:
> 
>   - Mode 1: PCIe x1 root complex on lane 0 plus 1G SGMII via GMAC0
>     (XPCS0) on lane 1.
>   - Mode 3: dual SGMII, GMAC0 (XPCS0) on lane 0 and PFE_EMAC_2 (XPCS1)
>     on lane 1.
> 
> The SerDes SUBSYS_MODE is derived from the lane child nodes present, so
> each layout requires its own board device tree. The Mode 1 variant
> enables both PCIe root complexes and extends their root ports by label
> (pcie0_rp, pcie1_rp), matching the RDB3 wiring: PCIe_0 reaches the M.2
> [ ... ]
>   - Mode 1: GMAC0 SGMII path up, and both PCIe root complexes come up -
>     PCIe_1 enumerates the card-slot NIC and passes traffic at full line
>     rate, PCIe_0 enumerates the M.2 slot with SW17-2 ON.
> 
> Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260919-s32g_serdes-v3-0-9d68868c1e89@oss.nxp.com?part=12