From: Damien Le Moal <dlemoal@kernel.org>
To: Jens Axboe <axboe@kernel.dk>,
linux-block@vger.kernel.org, Christoph Hellwig <hch@lst.de>,
linux-scsi@vger.kernel.org,
"Martin K . Petersen" <martin.petersen@oracle.com>
Subject: [PATCH v5 2/9] block: refactor blk_revalidate_disk_zones()
Date: Mon, 12 Oct 2026 22:01:14 +0900 [thread overview]
Message-ID: <20261012130121.1902634-3-dlemoal@kernel.org> (raw)
In-Reply-To: <20261012130121.1902634-1-dlemoal@kernel.org>
Split out most of the code of blk_revalidate_disk_zones() into the
internal function disk_revalidate_zones(). This will allow calling this
new helper together with other code under the zone revalidation mutex.
No functional change.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
block/blk-zoned.c | 63 +++++++++++++++++++++++++----------------------
1 file changed, 34 insertions(+), 29 deletions(-)
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 44010be6876a..e7f48774ae17 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -2542,20 +2542,7 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
return ret;
}
-/**
- * blk_revalidate_disk_zones - (re)allocate and initialize zone write plugs
- * @disk: Target disk
- *
- * Helper function for low-level device drivers to check, (re) allocate and
- * initialize resources used for managing zoned disks. This function should
- * normally be called by blk-mq based drivers when a zoned gendisk is probed
- * and when the zone configuration of the gendisk changes (e.g. after a format).
- * Before calling this function, the device driver must already have set the
- * device zone size (chunk_sector limit) and the max zone append limit.
- * BIO based drivers can also use this function as long as the device queue
- * can be safely frozen.
- */
-int blk_revalidate_disk_zones(struct gendisk *disk)
+static int disk_revalidate_zones(struct gendisk *disk)
{
struct blk_revalidate_zone_args args = { };
struct blk_report_zones_args rep_args = {
@@ -2566,19 +2553,10 @@ int blk_revalidate_disk_zones(struct gendisk *disk)
int retries = 2;
int ret;
- if (WARN_ON_ONCE(!blk_queue_is_zoned(disk->queue)))
- return -EIO;
-
- /*
- * Serialize calls to this function so that we can safely look at and
- * eventually change the disk zone information.
- */
- mutex_lock(&disk->zone_revalidate_mutex);
-
again:
ret = disk_revalidate_capacity(disk, &args);
if (ret)
- goto unlock;
+ return ret;
/*
* Allocate zone resources if they are needed and we have not done
@@ -2591,14 +2569,14 @@ int blk_revalidate_disk_zones(struct gendisk *disk)
ret = disk_alloc_zone_resources(disk, args.capacity);
if (ret) {
memalloc_noio_restore(noio_flag);
- goto unlock;
+ return ret;
}
}
ret = disk_init_revalidate_args(disk, &args);
if (ret) {
memalloc_noio_restore(noio_flag);
- goto unlock;
+ return ret;
}
ret = disk->fops->report_zones(disk, 0, UINT_MAX, &rep_args);
@@ -2615,8 +2593,6 @@ int blk_revalidate_disk_zones(struct gendisk *disk)
if (ret)
goto free_args;
- mutex_unlock(&disk->zone_revalidate_mutex);
-
return 0;
free_args:
@@ -2632,7 +2608,36 @@ int blk_revalidate_disk_zones(struct gendisk *disk)
}
pr_warn("%s: failed to revalidate zones\n", disk->disk_name);
-unlock:
+
+ return ret;
+}
+
+/**
+ * blk_revalidate_disk_zones - (re)allocate and initialize zone write plugs
+ * @disk: Target disk
+ *
+ * Helper function for low-level device drivers to check, (re) allocate and
+ * initialize resources used for managing zoned disks. This function should
+ * normally be called by blk-mq based drivers when a zoned gendisk is probed
+ * and when the zone configuration of the gendisk changes (e.g. after a format).
+ * Before calling this function, the device driver must already have set the
+ * device zone size (chunk_sector limit) and the max zone append limit.
+ * BIO based drivers can also use this function as long as the device queue
+ * can be safely frozen.
+ */
+int blk_revalidate_disk_zones(struct gendisk *disk)
+{
+ int ret;
+
+ if (WARN_ON_ONCE(!blk_queue_is_zoned(disk->queue)))
+ return -EIO;
+
+ /*
+ * Serialize calls to this function so that we can safely look at and
+ * eventually change the disk zone information.
+ */
+ mutex_lock(&disk->zone_revalidate_mutex);
+ ret = disk_revalidate_zones(disk);
mutex_unlock(&disk->zone_revalidate_mutex);
return ret;
--
2.55.0
next prev parent reply other threads:[~2026-10-12 13:01 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-12 13:01 [PATCH v5 0/9] Add support for storage element depopulation Damien Le Moal
2026-10-12 13:01 ` [PATCH v5 1/9] block: introduce disk_zone_is_offline() Damien Le Moal
2026-10-12 13:01 ` Damien Le Moal [this message]
2026-10-12 13:01 ` [PATCH v5 3/9] block: introduce storage element management Damien Le Moal
2026-10-12 13:23 ` sashiko-bot
2026-10-12 13:27 ` Damien Le Moal
2026-10-12 14:23 ` Christoph Hellwig
2026-10-12 13:01 ` [PATCH v5 4/9] block: add storage element management ioctls Damien Le Moal
2026-10-12 13:40 ` sashiko-bot
2026-10-12 13:49 ` Damien Le Moal
2026-10-12 14:31 ` Christoph Hellwig
2026-10-12 14:56 ` Damien Le Moal
2026-10-12 14:57 ` Christoph Hellwig
2026-10-12 14:59 ` Damien Le Moal
2026-10-12 13:01 ` [PATCH v5 5/9] zloop: add storage element emulation Damien Le Moal
2026-10-12 13:52 ` sashiko-bot
2026-10-12 13:01 ` [PATCH v5 6/9] zloop: add degrade_element control command Damien Le Moal
2026-10-12 14:02 ` sashiko-bot
2026-10-12 14:43 ` Christoph Hellwig
2026-10-12 13:01 ` [PATCH v5 7/9] scsi: sd: fail read commands to offline zones early Damien Le Moal
2026-10-12 14:36 ` Christoph Hellwig
2026-10-12 13:01 ` [PATCH v5 8/9] scsi: sd_zbc: always revalidate zones for disks supporting head depopulation Damien Le Moal
2026-10-12 14:19 ` sashiko-bot
2026-10-12 14:37 ` Christoph Hellwig
2026-10-12 14:57 ` Damien Le Moal
2026-10-12 13:01 ` [PATCH v5 9/9] scsi: sd_zbc: define storage element management operations Damien Le Moal
2026-10-12 14:38 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261012130121.1902634-3-dlemoal@kernel.org \
--to=dlemoal@kernel.org \
--cc=axboe@kernel.dk \
--cc=hch@lst.de \
--cc=linux-block@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.