All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hung-Chun Tseng <alan.tseng.cs@gmail.com>
To: Yixun Lan <dlan@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, E Shattow <e@freeshell.de>,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	spacemit@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] riscv: dts: spacemit: k1: mark boot-critical SoC nodes bootph-pre-ram
Date: Tue, 13 Oct 2026 07:56:23 +0800	[thread overview]
Message-ID: <20261012235624.77993-2-alan.tseng.cs@gmail.com> (raw)
In-Reply-To: <20261012235624.77993-1-alan.tseng.cs@gmail.com>

A bootloader SPL that follows the K1 BootROM runs from SRAM before DRAM
is up. It needs the root clocks, the clock and reset controllers, the
console UART, and the boot media controllers: SD (sdhci0), eMMC and
QSPI NOR. Mark these nodes bootph-pre-ram so an SPL can use the
upstream device tree as is, instead of carrying the tags in per-board
overlays.

These are the SoC nodes that the mainline U-Boot SPL for K1 currently
tags in its board -u-boot.dtsi files.

Assisted-by: claude-opus-5-5 dtbs_check
Signed-off-by: Hung-Chun Tseng <alan.tseng.cs@gmail.com>
---
 arch/riscv/boot/dts/spacemit/k1.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index 3fabfd341..8ca98d15a 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -322,6 +322,7 @@ cluster1_l2_cache: l2-cache1 {
 	clocks {
 		vctcxo_1m: clock-1m {
 			compatible = "fixed-clock";
+			bootph-pre-ram;
 			clock-frequency = <1000000>;
 			clock-output-names = "vctcxo_1m";
 			#clock-cells = <0>;
@@ -329,6 +330,7 @@ vctcxo_1m: clock-1m {
 
 		vctcxo_24m: clock-24m {
 			compatible = "fixed-clock";
+			bootph-pre-ram;
 			clock-frequency = <24000000>;
 			clock-output-names = "vctcxo_24m";
 			#clock-cells = <0>;
@@ -336,6 +338,7 @@ vctcxo_24m: clock-24m {
 
 		vctcxo_3m: clock-3m {
 			compatible = "fixed-clock";
+			bootph-pre-ram;
 			clock-frequency = <3000000>;
 			clock-output-names = "vctcxo_3m";
 			#clock-cells = <0>;
@@ -343,6 +346,7 @@ vctcxo_3m: clock-3m {
 
 		osc_32k: clock-32k {
 			compatible = "fixed-clock";
+			bootph-pre-ram;
 			clock-frequency = <32768>;
 			clock-output-names = "osc_32k";
 			#clock-cells = <0>;
@@ -586,6 +590,7 @@ i2c5: i2c@d4013800 {
 		syscon_apbc: system-controller@d4015000 {
 			compatible = "spacemit,k1-syscon-apbc";
 			reg = <0x0 0xd4015000 0x0 0x1000>;
+			bootph-pre-ram;
 			clocks = <&osc_32k>, <&vctcxo_1m>, <&vctcxo_3m>,
 				 <&vctcxo_24m>;
 			clock-names = "osc", "vctcxo_1m", "vctcxo_3m",
@@ -857,6 +862,7 @@ pwm19: pwm@d4022c00 {
 		syscon_mpmu: system-controller@d4050000 {
 			compatible = "spacemit,k1-syscon-mpmu";
 			reg = <0x0 0xd4050000 0x0 0x209c>;
+			bootph-pre-ram;
 			clocks = <&osc_32k>, <&vctcxo_1m>, <&vctcxo_3m>,
 				 <&vctcxo_24m>;
 			clock-names = "osc", "vctcxo_1m", "vctcxo_3m",
@@ -869,6 +875,7 @@ syscon_mpmu: system-controller@d4050000 {
 		pll: clock-controller@d4090000 {
 			compatible = "spacemit,k1-pll";
 			reg = <0x0 0xd4090000 0x0 0x1000>;
+			bootph-pre-ram;
 			clocks = <&vctcxo_24m>;
 			spacemit,mpmu = <&syscon_mpmu>;
 			#clock-cells = <1>;
@@ -877,6 +884,7 @@ pll: clock-controller@d4090000 {
 		syscon_apmu: system-controller@d4282800 {
 			compatible = "spacemit,k1-syscon-apmu";
 			reg = <0x0 0xd4282800 0x0 0x400>;
+			bootph-pre-ram;
 			clocks = <&osc_32k>, <&vctcxo_1m>, <&vctcxo_3m>,
 				 <&vctcxo_24m>;
 			clock-names = "osc", "vctcxo_1m", "vctcxo_3m",
@@ -956,6 +964,7 @@ uart0: serial@d4017000 {
 				compatible = "spacemit,k1-uart",
 					     "intel,xscale-uart";
 				reg = <0x0 0xd4017000 0x0 0x100>;
+				bootph-pre-ram;
 				clocks = <&syscon_apbc CLK_UART0>,
 					 <&syscon_apbc CLK_UART0_BUS>;
 				clock-names = "core", "bus";
@@ -1085,6 +1094,7 @@ qspi: spi@d420c000 {
 				reg = <0x0 0xd420c000 0x0 0x1000>,
 				      <0x0 0xb8000000 0x0 0xc00000>;
 				reg-names = "QuadSPI", "QuadSPI-memory";
+				bootph-pre-ram;
 				clocks = <&syscon_apmu CLK_QSPI_BUS>,
 					 <&syscon_apmu CLK_QSPI>;
 				clock-names = "qspi_en", "qspi";
@@ -1328,6 +1338,7 @@ usb_dwc3: usb@c0a00000 {
 			sdhci0: mmc@d4280000 {
 				compatible = "spacemit,k1-sdhci";
 				reg = <0x0 0xd4280000 0x0 0x200>;
+				bootph-pre-ram;
 				clocks = <&syscon_apmu CLK_SDH_AXI>,
 					 <&syscon_apmu CLK_SDH0>;
 				clock-names = "core", "io";
@@ -1341,6 +1352,7 @@ sdhci0: mmc@d4280000 {
 			emmc: mmc@d4281000 {
 				compatible = "spacemit,k1-sdhci";
 				reg = <0x0 0xd4281000 0x0 0x200>;
+				bootph-pre-ram;
 				clocks = <&syscon_apmu CLK_SDH_AXI>,
 					 <&syscon_apmu CLK_SDH2>;
 				clock-names = "core", "io";
-- 
2.43.0


WARNING: multiple messages have this Message-ID (diff)
From: Hung-Chun Tseng <alan.tseng.cs@gmail.com>
To: Yixun Lan <dlan@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, E Shattow <e@freeshell.de>,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	spacemit@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] riscv: dts: spacemit: k1: mark boot-critical SoC nodes bootph-pre-ram
Date: Tue, 13 Oct 2026 07:56:23 +0800	[thread overview]
Message-ID: <20261012235624.77993-2-alan.tseng.cs@gmail.com> (raw)
In-Reply-To: <20261012235624.77993-1-alan.tseng.cs@gmail.com>

A bootloader SPL that follows the K1 BootROM runs from SRAM before DRAM
is up. It needs the root clocks, the clock and reset controllers, the
console UART, and the boot media controllers: SD (sdhci0), eMMC and
QSPI NOR. Mark these nodes bootph-pre-ram so an SPL can use the
upstream device tree as is, instead of carrying the tags in per-board
overlays.

These are the SoC nodes that the mainline U-Boot SPL for K1 currently
tags in its board -u-boot.dtsi files.

Assisted-by: claude-opus-5-5 dtbs_check
Signed-off-by: Hung-Chun Tseng <alan.tseng.cs@gmail.com>
---
 arch/riscv/boot/dts/spacemit/k1.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index 3fabfd341..8ca98d15a 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -322,6 +322,7 @@ cluster1_l2_cache: l2-cache1 {
 	clocks {
 		vctcxo_1m: clock-1m {
 			compatible = "fixed-clock";
+			bootph-pre-ram;
 			clock-frequency = <1000000>;
 			clock-output-names = "vctcxo_1m";
 			#clock-cells = <0>;
@@ -329,6 +330,7 @@ vctcxo_1m: clock-1m {
 
 		vctcxo_24m: clock-24m {
 			compatible = "fixed-clock";
+			bootph-pre-ram;
 			clock-frequency = <24000000>;
 			clock-output-names = "vctcxo_24m";
 			#clock-cells = <0>;
@@ -336,6 +338,7 @@ vctcxo_24m: clock-24m {
 
 		vctcxo_3m: clock-3m {
 			compatible = "fixed-clock";
+			bootph-pre-ram;
 			clock-frequency = <3000000>;
 			clock-output-names = "vctcxo_3m";
 			#clock-cells = <0>;
@@ -343,6 +346,7 @@ vctcxo_3m: clock-3m {
 
 		osc_32k: clock-32k {
 			compatible = "fixed-clock";
+			bootph-pre-ram;
 			clock-frequency = <32768>;
 			clock-output-names = "osc_32k";
 			#clock-cells = <0>;
@@ -586,6 +590,7 @@ i2c5: i2c@d4013800 {
 		syscon_apbc: system-controller@d4015000 {
 			compatible = "spacemit,k1-syscon-apbc";
 			reg = <0x0 0xd4015000 0x0 0x1000>;
+			bootph-pre-ram;
 			clocks = <&osc_32k>, <&vctcxo_1m>, <&vctcxo_3m>,
 				 <&vctcxo_24m>;
 			clock-names = "osc", "vctcxo_1m", "vctcxo_3m",
@@ -857,6 +862,7 @@ pwm19: pwm@d4022c00 {
 		syscon_mpmu: system-controller@d4050000 {
 			compatible = "spacemit,k1-syscon-mpmu";
 			reg = <0x0 0xd4050000 0x0 0x209c>;
+			bootph-pre-ram;
 			clocks = <&osc_32k>, <&vctcxo_1m>, <&vctcxo_3m>,
 				 <&vctcxo_24m>;
 			clock-names = "osc", "vctcxo_1m", "vctcxo_3m",
@@ -869,6 +875,7 @@ syscon_mpmu: system-controller@d4050000 {
 		pll: clock-controller@d4090000 {
 			compatible = "spacemit,k1-pll";
 			reg = <0x0 0xd4090000 0x0 0x1000>;
+			bootph-pre-ram;
 			clocks = <&vctcxo_24m>;
 			spacemit,mpmu = <&syscon_mpmu>;
 			#clock-cells = <1>;
@@ -877,6 +884,7 @@ pll: clock-controller@d4090000 {
 		syscon_apmu: system-controller@d4282800 {
 			compatible = "spacemit,k1-syscon-apmu";
 			reg = <0x0 0xd4282800 0x0 0x400>;
+			bootph-pre-ram;
 			clocks = <&osc_32k>, <&vctcxo_1m>, <&vctcxo_3m>,
 				 <&vctcxo_24m>;
 			clock-names = "osc", "vctcxo_1m", "vctcxo_3m",
@@ -956,6 +964,7 @@ uart0: serial@d4017000 {
 				compatible = "spacemit,k1-uart",
 					     "intel,xscale-uart";
 				reg = <0x0 0xd4017000 0x0 0x100>;
+				bootph-pre-ram;
 				clocks = <&syscon_apbc CLK_UART0>,
 					 <&syscon_apbc CLK_UART0_BUS>;
 				clock-names = "core", "bus";
@@ -1085,6 +1094,7 @@ qspi: spi@d420c000 {
 				reg = <0x0 0xd420c000 0x0 0x1000>,
 				      <0x0 0xb8000000 0x0 0xc00000>;
 				reg-names = "QuadSPI", "QuadSPI-memory";
+				bootph-pre-ram;
 				clocks = <&syscon_apmu CLK_QSPI_BUS>,
 					 <&syscon_apmu CLK_QSPI>;
 				clock-names = "qspi_en", "qspi";
@@ -1328,6 +1338,7 @@ usb_dwc3: usb@c0a00000 {
 			sdhci0: mmc@d4280000 {
 				compatible = "spacemit,k1-sdhci";
 				reg = <0x0 0xd4280000 0x0 0x200>;
+				bootph-pre-ram;
 				clocks = <&syscon_apmu CLK_SDH_AXI>,
 					 <&syscon_apmu CLK_SDH0>;
 				clock-names = "core", "io";
@@ -1341,6 +1352,7 @@ sdhci0: mmc@d4280000 {
 			emmc: mmc@d4281000 {
 				compatible = "spacemit,k1-sdhci";
 				reg = <0x0 0xd4281000 0x0 0x200>;
+				bootph-pre-ram;
 				clocks = <&syscon_apmu CLK_SDH_AXI>,
 					 <&syscon_apmu CLK_SDH2>;
 				clock-names = "core", "io";
-- 
2.43.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2026-10-12 23:56 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-12 23:56 [PATCH 0/2] riscv: dts: spacemit: mark K1 boot nodes bootph-pre-ram Hung-Chun Tseng
2026-10-12 23:56 ` Hung-Chun Tseng
2026-10-12 23:56 ` Hung-Chun Tseng [this message]
2026-10-12 23:56   ` [PATCH 1/2] riscv: dts: spacemit: k1: mark boot-critical SoC " Hung-Chun Tseng
2026-10-13  0:04   ` sashiko-bot
2026-10-12 23:56 ` [PATCH 2/2] riscv: dts: spacemit: mark K1 board boot devices bootph-pre-ram Hung-Chun Tseng
2026-10-12 23:56   ` Hung-Chun Tseng
2026-10-13  0:08   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261012235624.77993-2-alan.tseng.cs@gmail.com \
    --to=alan.tseng.cs@gmail.com \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@kernel.org \
    --cc=e@freeshell.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=robh@kernel.org \
    --cc=spacemit@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.