All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hung-Chun Tseng <alan.tseng.cs@gmail.com>
To: Yixun Lan <dlan@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, E Shattow <e@freeshell.de>,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	spacemit@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] riscv: dts: spacemit: mark K1 board boot devices bootph-pre-ram
Date: Tue, 13 Oct 2026 07:56:24 +0800	[thread overview]
Message-ID: <20261012235624.77993-3-alan.tseng.cs@gmail.com> (raw)
In-Reply-To: <20261012235624.77993-1-alan.tseng.cs@gmail.com>

On K1 boards an SPL reads the board EEPROM (0x50 on i2c2) to identify
the board, and before DRAM training it programs the P1 PMIC (0x41 on
i2c8) rails buck1, buck3 and aldo1. Boards that boot from SPI NOR also
need the flash on QSPI.

Mark these board peripherals, and the I2C buses they sit on,
bootph-pre-ram on the boards that have them.

Assisted-by: claude-opus-5-5 dtbs_check
Signed-off-by: Hung-Chun Tseng <alan.tseng.cs@gmail.com>
---
 arch/riscv/boot/dts/spacemit/k1-bananapi-cm6.dtsi | 7 +++++++
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts   | 7 +++++++
 arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts | 8 ++++++++
 arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts    | 8 ++++++++
 arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts  | 5 +++++
 arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts  | 6 ++++++
 6 files changed, 41 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-cm6.dtsi b/arch/riscv/boot/dts/spacemit/k1-bananapi-cm6.dtsi
index 81c40df2a..6269d2ba7 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-cm6.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-cm6.dtsi
@@ -64,6 +64,7 @@ &pdma {
 };
 
 &i2c2 {
+	bootph-pre-ram;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_0_cfg>;
 	status = "okay";
@@ -71,6 +72,7 @@ &i2c2 {
 	eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
+		bootph-pre-ram;
 		vcc-supply = <&buck3_1v8>;
 		pagesize = <16>;
 		read-only;
@@ -93,6 +95,7 @@ serial-number {
 };
 
 &i2c8 {
+	bootph-pre-ram;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c8_cfg>;
 	status = "okay";
@@ -100,6 +103,7 @@ &i2c8 {
 	pmic@41 {
 		compatible = "spacemit,p1";
 		reg = <0x41>;
+		bootph-pre-ram;
 		interrupts = <64>;
 		vin1-supply = <&reg_vcc_4v>;
 		vin2-supply = <&reg_vcc_4v>;
@@ -113,6 +117,7 @@ pmic@41 {
 
 		regulators {
 			buck1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <5000>;
@@ -127,6 +132,7 @@ buck2 {
 			};
 
 			buck3_1v8: buck3 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <5000>;
@@ -155,6 +161,7 @@ buck6 {
 			};
 
 			aldo1: aldo1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 58035d886..e74505984 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -187,6 +187,7 @@ &qspi {
 };
 
 &i2c2 {
+	bootph-pre-ram;
 	pinctrl-0 = <&i2c2_0_cfg>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -194,6 +195,7 @@ &i2c2 {
 	eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
+		bootph-pre-ram;
 		vcc-supply = <&buck3_1v8>; /* EEPROM_VCC1V8 */
 		pagesize = <16>;
 		read-only;
@@ -216,6 +218,7 @@ serial-number {
 };
 
 &i2c8 {
+	bootph-pre-ram;
 	pinctrl-0 = <&i2c8_cfg>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -223,6 +226,7 @@ &i2c8 {
 	pmic@41 {
 		compatible = "spacemit,p1";
 		reg = <0x41>;
+		bootph-pre-ram;
 		interrupts = <64>;
 		vin1-supply = <&reg_vcc_4v>;
 		vin2-supply = <&reg_vcc_4v>;
@@ -236,6 +240,7 @@ pmic@41 {
 
 		regulators {
 			buck1_0v9: buck1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <5000>;
@@ -250,6 +255,7 @@ buck2 {
 			};
 
 			buck3_1v8: buck3 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <5000>;
@@ -278,6 +284,7 @@ buck6 {
 			};
 
 			aldo1: aldo1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
diff --git a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
index 635e95aad..406b7ca16 100644
--- a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
@@ -201,6 +201,7 @@ &pdma {
 };
 
 &i2c2 {
+	bootph-pre-ram;
 	pinctrl-0 = <&i2c2_0_cfg>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -208,6 +209,7 @@ &i2c2 {
 	eeprom@50 {
 		compatible = "atmel,24c04";
 		reg = <0x50>;
+		bootph-pre-ram;
 		vcc-supply = <&buck3_1v8>; /* EEPROM_VCC18 */
 		pagesize = <16>;
 		read-only;
@@ -223,6 +225,7 @@ product-name {
 };
 
 &i2c8 {
+	bootph-pre-ram;
 	pinctrl-0 = <&i2c8_cfg>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -230,6 +233,7 @@ &i2c8 {
 	pmic@41 {
 		compatible = "spacemit,p1";
 		reg = <0x41>;
+		bootph-pre-ram;
 		interrupts = <64>;
 		vin1-supply = <&reg_vcc_4v>;
 		vin2-supply = <&reg_vcc_4v>;
@@ -243,6 +247,7 @@ pmic@41 {
 
 		regulators {
 			buck1_0v9: buck1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <5000>;
@@ -257,6 +262,7 @@ buck2 {
 			};
 
 			buck3_1v8: buck3 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <5000>;
@@ -285,6 +291,7 @@ buck6 {
 			};
 
 			aldo1: aldo1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -386,6 +393,7 @@ &qspi {
 	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
+		bootph-pre-ram;
 		spi-max-frequency = <26500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
index 246f8f2ab..0531bd003 100644
--- a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
@@ -127,6 +127,7 @@ &pdma {
 };
 
 &i2c2 {
+	bootph-pre-ram;
 	pinctrl-0 = <&i2c2_0_cfg>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -134,6 +135,7 @@ &i2c2 {
 	eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
+		bootph-pre-ram;
 		vcc-supply = <&buck3_1v8>; /* EEPROM_VCC1V8 */
 		pagesize = <8>;
 		read-only;
@@ -159,6 +161,7 @@ num-macs {
 };
 
 &i2c8 {
+	bootph-pre-ram;
 	pinctrl-0 = <&i2c8_cfg>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -166,6 +169,7 @@ &i2c8 {
 	pmic@41 {
 		compatible = "spacemit,p1";
 		reg = <0x41>;
+		bootph-pre-ram;
 		interrupts = <64>;
 		vin1-supply = <&reg_vcc_4v>;
 		vin2-supply = <&reg_vcc_4v>;
@@ -179,6 +183,7 @@ pmic@41 {
 
 		regulators {
 			buck1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <5000>;
@@ -193,6 +198,7 @@ buck2 {
 			};
 
 			buck3_1v8: buck3 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <5000>;
@@ -221,6 +227,7 @@ buck6 {
 			};
 
 			aldo1: aldo1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -320,6 +327,7 @@ &qspi {
 	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
+		bootph-pre-ram;
 		spi-max-frequency = <26500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
index 2d1ba34cb..8e9bbbeb1 100644
--- a/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
@@ -113,6 +113,7 @@ rgmii1: phy@1 {
 };
 
 &i2c8 {
+	bootph-pre-ram;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c8_cfg>;
 	status = "okay";
@@ -120,6 +121,7 @@ &i2c8 {
 	pmic@41 {
 		compatible = "spacemit,p1";
 		reg = <0x41>;
+		bootph-pre-ram;
 		interrupts = <64>;
 		vin1-supply = <&vcc4v0>;
 		vin2-supply = <&vcc4v0>;
@@ -133,6 +135,7 @@ pmic@41 {
 
 		regulators {
 			buck1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <5000>;
@@ -147,6 +150,7 @@ buck2 {
 			};
 
 			buck3_1v8: buck3 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <5000>;
@@ -175,6 +179,7 @@ buck6 {
 			};
 
 			aldo1_3v3: aldo1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
index b907a1396..857b4ebe3 100644
--- a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
@@ -143,6 +143,7 @@ &pdma {
 };
 
 &i2c8 {
+	bootph-pre-ram;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c8_cfg>;
 	status = "okay";
@@ -150,6 +151,7 @@ &i2c8 {
 	pmic@41 {
 		compatible = "spacemit,p1";
 		reg = <0x41>;
+		bootph-pre-ram;
 		interrupts = <64>;
 		vin1-supply = <&vcc4v0>;
 		vin2-supply = <&vcc4v0>;
@@ -163,6 +165,7 @@ pmic@41 {
 
 		regulators {
 			buck1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <5000>;
@@ -177,6 +180,7 @@ buck2 {
 			};
 
 			buck3_1v8: buck3 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <5000>;
@@ -205,6 +209,7 @@ buck6 {
 			};
 
 			aldo1: aldo1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -298,6 +303,7 @@ &qspi {
 	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
+		bootph-pre-ram;
 		spi-max-frequency = <26500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
-- 
2.43.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

WARNING: multiple messages have this Message-ID (diff)
From: Hung-Chun Tseng <alan.tseng.cs@gmail.com>
To: Yixun Lan <dlan@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, E Shattow <e@freeshell.de>,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	spacemit@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] riscv: dts: spacemit: mark K1 board boot devices bootph-pre-ram
Date: Tue, 13 Oct 2026 07:56:24 +0800	[thread overview]
Message-ID: <20261012235624.77993-3-alan.tseng.cs@gmail.com> (raw)
In-Reply-To: <20261012235624.77993-1-alan.tseng.cs@gmail.com>

On K1 boards an SPL reads the board EEPROM (0x50 on i2c2) to identify
the board, and before DRAM training it programs the P1 PMIC (0x41 on
i2c8) rails buck1, buck3 and aldo1. Boards that boot from SPI NOR also
need the flash on QSPI.

Mark these board peripherals, and the I2C buses they sit on,
bootph-pre-ram on the boards that have them.

Assisted-by: claude-opus-5-5 dtbs_check
Signed-off-by: Hung-Chun Tseng <alan.tseng.cs@gmail.com>
---
 arch/riscv/boot/dts/spacemit/k1-bananapi-cm6.dtsi | 7 +++++++
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts   | 7 +++++++
 arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts | 8 ++++++++
 arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts    | 8 ++++++++
 arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts  | 5 +++++
 arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts  | 6 ++++++
 6 files changed, 41 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-cm6.dtsi b/arch/riscv/boot/dts/spacemit/k1-bananapi-cm6.dtsi
index 81c40df2a..6269d2ba7 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-cm6.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-cm6.dtsi
@@ -64,6 +64,7 @@ &pdma {
 };
 
 &i2c2 {
+	bootph-pre-ram;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_0_cfg>;
 	status = "okay";
@@ -71,6 +72,7 @@ &i2c2 {
 	eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
+		bootph-pre-ram;
 		vcc-supply = <&buck3_1v8>;
 		pagesize = <16>;
 		read-only;
@@ -93,6 +95,7 @@ serial-number {
 };
 
 &i2c8 {
+	bootph-pre-ram;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c8_cfg>;
 	status = "okay";
@@ -100,6 +103,7 @@ &i2c8 {
 	pmic@41 {
 		compatible = "spacemit,p1";
 		reg = <0x41>;
+		bootph-pre-ram;
 		interrupts = <64>;
 		vin1-supply = <&reg_vcc_4v>;
 		vin2-supply = <&reg_vcc_4v>;
@@ -113,6 +117,7 @@ pmic@41 {
 
 		regulators {
 			buck1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <5000>;
@@ -127,6 +132,7 @@ buck2 {
 			};
 
 			buck3_1v8: buck3 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <5000>;
@@ -155,6 +161,7 @@ buck6 {
 			};
 
 			aldo1: aldo1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 58035d886..e74505984 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -187,6 +187,7 @@ &qspi {
 };
 
 &i2c2 {
+	bootph-pre-ram;
 	pinctrl-0 = <&i2c2_0_cfg>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -194,6 +195,7 @@ &i2c2 {
 	eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
+		bootph-pre-ram;
 		vcc-supply = <&buck3_1v8>; /* EEPROM_VCC1V8 */
 		pagesize = <16>;
 		read-only;
@@ -216,6 +218,7 @@ serial-number {
 };
 
 &i2c8 {
+	bootph-pre-ram;
 	pinctrl-0 = <&i2c8_cfg>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -223,6 +226,7 @@ &i2c8 {
 	pmic@41 {
 		compatible = "spacemit,p1";
 		reg = <0x41>;
+		bootph-pre-ram;
 		interrupts = <64>;
 		vin1-supply = <&reg_vcc_4v>;
 		vin2-supply = <&reg_vcc_4v>;
@@ -236,6 +240,7 @@ pmic@41 {
 
 		regulators {
 			buck1_0v9: buck1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <5000>;
@@ -250,6 +255,7 @@ buck2 {
 			};
 
 			buck3_1v8: buck3 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <5000>;
@@ -278,6 +284,7 @@ buck6 {
 			};
 
 			aldo1: aldo1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
diff --git a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
index 635e95aad..406b7ca16 100644
--- a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
@@ -201,6 +201,7 @@ &pdma {
 };
 
 &i2c2 {
+	bootph-pre-ram;
 	pinctrl-0 = <&i2c2_0_cfg>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -208,6 +209,7 @@ &i2c2 {
 	eeprom@50 {
 		compatible = "atmel,24c04";
 		reg = <0x50>;
+		bootph-pre-ram;
 		vcc-supply = <&buck3_1v8>; /* EEPROM_VCC18 */
 		pagesize = <16>;
 		read-only;
@@ -223,6 +225,7 @@ product-name {
 };
 
 &i2c8 {
+	bootph-pre-ram;
 	pinctrl-0 = <&i2c8_cfg>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -230,6 +233,7 @@ &i2c8 {
 	pmic@41 {
 		compatible = "spacemit,p1";
 		reg = <0x41>;
+		bootph-pre-ram;
 		interrupts = <64>;
 		vin1-supply = <&reg_vcc_4v>;
 		vin2-supply = <&reg_vcc_4v>;
@@ -243,6 +247,7 @@ pmic@41 {
 
 		regulators {
 			buck1_0v9: buck1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <5000>;
@@ -257,6 +262,7 @@ buck2 {
 			};
 
 			buck3_1v8: buck3 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <5000>;
@@ -285,6 +291,7 @@ buck6 {
 			};
 
 			aldo1: aldo1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -386,6 +393,7 @@ &qspi {
 	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
+		bootph-pre-ram;
 		spi-max-frequency = <26500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
index 246f8f2ab..0531bd003 100644
--- a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
@@ -127,6 +127,7 @@ &pdma {
 };
 
 &i2c2 {
+	bootph-pre-ram;
 	pinctrl-0 = <&i2c2_0_cfg>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -134,6 +135,7 @@ &i2c2 {
 	eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
+		bootph-pre-ram;
 		vcc-supply = <&buck3_1v8>; /* EEPROM_VCC1V8 */
 		pagesize = <8>;
 		read-only;
@@ -159,6 +161,7 @@ num-macs {
 };
 
 &i2c8 {
+	bootph-pre-ram;
 	pinctrl-0 = <&i2c8_cfg>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -166,6 +169,7 @@ &i2c8 {
 	pmic@41 {
 		compatible = "spacemit,p1";
 		reg = <0x41>;
+		bootph-pre-ram;
 		interrupts = <64>;
 		vin1-supply = <&reg_vcc_4v>;
 		vin2-supply = <&reg_vcc_4v>;
@@ -179,6 +183,7 @@ pmic@41 {
 
 		regulators {
 			buck1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <5000>;
@@ -193,6 +198,7 @@ buck2 {
 			};
 
 			buck3_1v8: buck3 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <5000>;
@@ -221,6 +227,7 @@ buck6 {
 			};
 
 			aldo1: aldo1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -320,6 +327,7 @@ &qspi {
 	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
+		bootph-pre-ram;
 		spi-max-frequency = <26500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
index 2d1ba34cb..8e9bbbeb1 100644
--- a/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
@@ -113,6 +113,7 @@ rgmii1: phy@1 {
 };
 
 &i2c8 {
+	bootph-pre-ram;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c8_cfg>;
 	status = "okay";
@@ -120,6 +121,7 @@ &i2c8 {
 	pmic@41 {
 		compatible = "spacemit,p1";
 		reg = <0x41>;
+		bootph-pre-ram;
 		interrupts = <64>;
 		vin1-supply = <&vcc4v0>;
 		vin2-supply = <&vcc4v0>;
@@ -133,6 +135,7 @@ pmic@41 {
 
 		regulators {
 			buck1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <5000>;
@@ -147,6 +150,7 @@ buck2 {
 			};
 
 			buck3_1v8: buck3 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <5000>;
@@ -175,6 +179,7 @@ buck6 {
 			};
 
 			aldo1_3v3: aldo1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
index b907a1396..857b4ebe3 100644
--- a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
@@ -143,6 +143,7 @@ &pdma {
 };
 
 &i2c8 {
+	bootph-pre-ram;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c8_cfg>;
 	status = "okay";
@@ -150,6 +151,7 @@ &i2c8 {
 	pmic@41 {
 		compatible = "spacemit,p1";
 		reg = <0x41>;
+		bootph-pre-ram;
 		interrupts = <64>;
 		vin1-supply = <&vcc4v0>;
 		vin2-supply = <&vcc4v0>;
@@ -163,6 +165,7 @@ pmic@41 {
 
 		regulators {
 			buck1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <5000>;
@@ -177,6 +180,7 @@ buck2 {
 			};
 
 			buck3_1v8: buck3 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <5000>;
@@ -205,6 +209,7 @@ buck6 {
 			};
 
 			aldo1: aldo1 {
+				bootph-pre-ram;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -298,6 +303,7 @@ &qspi {
 	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
+		bootph-pre-ram;
 		spi-max-frequency = <26500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
-- 
2.43.0


  parent reply	other threads:[~2026-10-12 23:57 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-12 23:56 [PATCH 0/2] riscv: dts: spacemit: mark K1 boot nodes bootph-pre-ram Hung-Chun Tseng
2026-10-12 23:56 ` Hung-Chun Tseng
2026-10-12 23:56 ` [PATCH 1/2] riscv: dts: spacemit: k1: mark boot-critical SoC " Hung-Chun Tseng
2026-10-12 23:56   ` Hung-Chun Tseng
2026-10-13  0:04   ` sashiko-bot
2026-10-12 23:56 ` Hung-Chun Tseng [this message]
2026-10-12 23:56   ` [PATCH 2/2] riscv: dts: spacemit: mark K1 board boot devices bootph-pre-ram Hung-Chun Tseng
2026-10-13  0:08   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261012235624.77993-3-alan.tseng.cs@gmail.com \
    --to=alan.tseng.cs@gmail.com \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@kernel.org \
    --cc=e@freeshell.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=robh@kernel.org \
    --cc=spacemit@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.