[PATCH 3/3] arm64: dts: qcom: sm8350: Add camera clock controller

[Vladimir Zapolskiy <vz@kernel.org>]

Add the camera clock controller device tree node to SM8350 SoC dtsi.

The camera clock controller PLLs are powered by MX rail, CAM_CC_PLL0
runs at 1200MHz, which requires SVS_L1 level of MX, while all other
camera clock controller PLLs can run at SVS level of MX or lower.

Signed-off-by: Vladimir Zapolskiy <vz@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 55b32050ce9c..a51942c99f8a 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2830,6 +2830,21 @@ videocc: clock-controller@abf0000 {
 			#power-domain-cells = <1>;
 		};
 
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sm8350-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MX>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_svs_l1>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sm8350-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
-- 
2.51.0