All of lore.kernel.org
 help / color / mirror / Atom feed
From: Conor Dooley <conor@kernel.org>
To: christian.koever-draxl@student.uibk.ac.at
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
	neil.armstrong@linaro.org, khilman@baylibre.com,
	jbrunet@baylibre.com, martin.blumenstingl@googlemail.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org,
	"Christian Stefan Kövér-Draxl" <ckoever@outlook.de>
Subject: Re: [PATCH 09/10] arm64: dts: amlogic: meson-s4: add the AO CEC controller
Date: Fri, 6 Nov 2026 17:19:46 +0000	[thread overview]
Message-ID: <20261106-walk-overload-3ffa489c0af1@spud> (raw)
In-Reply-To: <20261106104659.54656-10-christian.koever-draxl@student.uibk.ac.at>


[-- Attachment #1.1: Type: text/plain, Size: 1910 bytes --]

On Fri, Nov 06, 2026 at 11:46:58AM +0100, christian.koever-draxl@student.uibk.ac.at wrote:
> From: Christian Stefan Kövér-Draxl <ckoever@outlook.de>
> 
> Add the AO_CEC_A controller and its pin group.
> 
> Signed-off-by: Christian Stefan Kövér-Draxl <ckoever@outlook.de>
> ---
>  arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 24 +++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> index 155997649dc3..dd51e786d29d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> @@ -747,6 +747,14 @@ mux {
>  					};
>  				};
>  
> +				ao_cec_a_pins: ao-cec-a {
> +					mux {
> +						groups = "ao_cec_a";
> +						function = "ao_cec_a";
> +						bias-disable;
> +					};
> +				};
> +
>  			};
>  
>  			gpio_intc: interrupt-controller@4080 {
> @@ -970,6 +978,22 @@ sec_ao: ao-secure@10220 {
>  				amlogic,has-chip-id;
>  			};
>  
> +			cec_a: cec@44000 {
> +				compatible = "amlogic,meson-gx-ao-cec";

This is an s4, not a gx, so you need a specific compatible.
pw-bot: changes-requested

Thanks,
Conor.

> +				reg = <0x0 0x44000 0x0 0x14>;
> +				interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
> +				clocks = <&clkc_periphs CLKID_CECA_32K_CLKOUT>;
> +				clock-names = "core";
> +				assigned-clocks = <&clkc_periphs CLKID_CECA_32K_DIV>,
> +						  <&clkc_periphs CLKID_CECA_32K_SEL_PRE>,
> +						  <&clkc_periphs CLKID_CECA_32K_SEL>;
> +				assigned-clock-parents = <0>,
> +							 <&clkc_periphs CLKID_CECA_32K_DIV>,
> +							 <&clkc_periphs CLKID_CECA_32K_SEL_PRE>;
> +				assigned-clock-rates = <32768>, <0>, <0>;
> +				status = "disabled";
> +			};
> +
>  			ir: ir@84040 {
>  				compatible = "amlogic,meson-s4-ir";
>  				reg = <0x0 0x84040 0x0 0x30>;
> -- 
> 2.56.0
> 

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 167 bytes --]

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

WARNING: multiple messages have this Message-ID (diff)
From: Conor Dooley <conor@kernel.org>
To: christian.koever-draxl@student.uibk.ac.at
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
	neil.armstrong@linaro.org, khilman@baylibre.com,
	jbrunet@baylibre.com, martin.blumenstingl@googlemail.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org,
	"Christian Stefan Kövér-Draxl" <ckoever@outlook.de>
Subject: Re: [PATCH 09/10] arm64: dts: amlogic: meson-s4: add the AO CEC controller
Date: Fri, 6 Nov 2026 17:19:46 +0000	[thread overview]
Message-ID: <20261106-walk-overload-3ffa489c0af1@spud> (raw)
In-Reply-To: <20261106104659.54656-10-christian.koever-draxl@student.uibk.ac.at>

[-- Attachment #1: Type: text/plain, Size: 1910 bytes --]

On Fri, Nov 06, 2026 at 11:46:58AM +0100, christian.koever-draxl@student.uibk.ac.at wrote:
> From: Christian Stefan Kövér-Draxl <ckoever@outlook.de>
> 
> Add the AO_CEC_A controller and its pin group.
> 
> Signed-off-by: Christian Stefan Kövér-Draxl <ckoever@outlook.de>
> ---
>  arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 24 +++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> index 155997649dc3..dd51e786d29d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> @@ -747,6 +747,14 @@ mux {
>  					};
>  				};
>  
> +				ao_cec_a_pins: ao-cec-a {
> +					mux {
> +						groups = "ao_cec_a";
> +						function = "ao_cec_a";
> +						bias-disable;
> +					};
> +				};
> +
>  			};
>  
>  			gpio_intc: interrupt-controller@4080 {
> @@ -970,6 +978,22 @@ sec_ao: ao-secure@10220 {
>  				amlogic,has-chip-id;
>  			};
>  
> +			cec_a: cec@44000 {
> +				compatible = "amlogic,meson-gx-ao-cec";

This is an s4, not a gx, so you need a specific compatible.
pw-bot: changes-requested

Thanks,
Conor.

> +				reg = <0x0 0x44000 0x0 0x14>;
> +				interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
> +				clocks = <&clkc_periphs CLKID_CECA_32K_CLKOUT>;
> +				clock-names = "core";
> +				assigned-clocks = <&clkc_periphs CLKID_CECA_32K_DIV>,
> +						  <&clkc_periphs CLKID_CECA_32K_SEL_PRE>,
> +						  <&clkc_periphs CLKID_CECA_32K_SEL>;
> +				assigned-clock-parents = <0>,
> +							 <&clkc_periphs CLKID_CECA_32K_DIV>,
> +							 <&clkc_periphs CLKID_CECA_32K_SEL_PRE>;
> +				assigned-clock-rates = <32768>, <0>, <0>;
> +				status = "disabled";
> +			};
> +
>  			ir: ir@84040 {
>  				compatible = "amlogic,meson-s4-ir";
>  				reg = <0x0 0x84040 0x0 0x30>;
> -- 
> 2.56.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  parent reply	other threads:[~2026-11-06 17:19 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-06 10:46 [PATCH 00/10] arm64: dts: amlogic: S4 SoC additions and the Amediatech X98Q christian.koever-draxl
2026-11-06 10:46 ` christian.koever-draxl
2026-11-06 10:46 ` [PATCH 01/10] dt-bindings: arm: amlogic: add " christian.koever-draxl
2026-11-06 10:46   ` christian.koever-draxl
2026-11-06 17:17   ` Conor Dooley
2026-11-06 17:17     ` Conor Dooley
2026-11-06 10:46 ` [PATCH 02/10] arm64: dts: amlogic: meson-s4: describe the CPU caches christian.koever-draxl
2026-11-06 10:46   ` christian.koever-draxl
2026-11-06 10:52   ` neil.armstrong
2026-11-06 10:52     ` neil.armstrong
2026-11-06 10:46 ` [PATCH 03/10] arm64: dts: amlogic: meson-s4: add the PSCI CPU idle state christian.koever-draxl
2026-11-06 10:46   ` christian.koever-draxl
2026-11-06 10:54   ` neil.armstrong
2026-11-06 10:54     ` neil.armstrong
2026-11-06 10:46 ` [PATCH 04/10] arm64: dts: amlogic: meson-s4: use the S4 secure monitor compatible christian.koever-draxl
2026-11-06 10:46   ` christian.koever-draxl
2026-11-06 10:54   ` sashiko-bot
2026-11-06 10:54     ` sashiko-bot
2026-11-06 10:46 ` [PATCH 05/10] arm64: dts: amlogic: meson-s4: add the Mali GPU christian.koever-draxl
2026-11-06 10:46   ` christian.koever-draxl
2026-11-06 17:18   ` Conor Dooley
2026-11-06 17:18     ` Conor Dooley
2026-11-06 10:46 ` [PATCH 06/10] arm64: dts: amlogic: meson-s4: add the CPU thermal sensor and zone christian.koever-draxl
2026-11-06 10:46   ` christian.koever-draxl
2026-11-06 10:53   ` sashiko-bot
2026-11-06 10:53     ` sashiko-bot
2026-11-06 10:46 ` [PATCH 07/10] arm64: dts: amlogic: meson-s4: add the GE2D christian.koever-draxl
2026-11-06 10:46   ` christian.koever-draxl
2026-11-06 10:53   ` sashiko-bot
2026-11-06 10:53     ` sashiko-bot
2026-11-06 10:46 ` [PATCH 08/10] arm64: dts: amlogic: meson-s4: add the USB host christian.koever-draxl
2026-11-06 10:46   ` christian.koever-draxl
2026-11-06 10:55   ` neil.armstrong
2026-11-06 10:55     ` neil.armstrong
2026-11-06 10:59   ` sashiko-bot
2026-11-06 10:59     ` sashiko-bot
2026-11-06 10:46 ` [PATCH 09/10] arm64: dts: amlogic: meson-s4: add the AO CEC controller christian.koever-draxl
2026-11-06 10:46   ` christian.koever-draxl
2026-11-06 10:55   ` neil.armstrong
2026-11-06 10:55     ` neil.armstrong
2026-11-06 17:19   ` Conor Dooley [this message]
2026-11-06 17:19     ` Conor Dooley
2026-11-06 10:46 ` [PATCH 10/10] arm64: dts: amlogic: add the Amediatech X98Q christian.koever-draxl
2026-11-06 10:46   ` christian.koever-draxl
2026-11-06 11:00   ` sashiko-bot
2026-11-06 11:00     ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261106-walk-overload-3ffa489c0af1@spud \
    --to=conor@kernel.org \
    --cc=christian.koever-draxl@student.uibk.ac.at \
    --cc=ckoever@outlook.de \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.