From: claudiu beznea <claudiu.beznea@tuxon.dev>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: vkoul@kernel.org, kishon@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, p.zabel@pengutronix.de,
geert+renesas@glider.be, magnus.damm@gmail.com,
gregkh@linuxfoundation.org, mturquette@baylibre.com,
sboyd@kernel.org, yoshihiro.shimoda.uh@renesas.com,
biju.das.jz@bp.renesas.com, ulf.hansson@linaro.org,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Subject: Re: [PATCH 04/16] soc: renesas: Add SYSC driver for Renesas RZ/G3S
Date: Wed, 25 Sep 2024 10:50:24 +0300 [thread overview]
Message-ID: <23531a70-cf50-4b32-a9fd-81e6cfcbcf9d@tuxon.dev> (raw)
In-Reply-To: <CAMuHMdVQsHx0nC3xwQWVRWyWMnbXd1=RokNn8rkJv3bfG_0p-A@mail.gmail.com>
Hi, Geert,
On 24.09.2024 14:32, Geert Uytterhoeven wrote:
> Hi Claudiu,
>
> On Thu, Aug 22, 2024 at 5:28 PM Claudiu <claudiu.beznea@tuxon.dev> wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>
>> The RZ/G3S SYS Controller has 2 registers (one for PCIE one for USB) that
>> need to be configured before/after powering off/on the PCI or USB
>> ares. The bits in these registers control signals to PCIE and USB that
>> need to be de-asserted/asserted after/before power on/off event. For this
>> add SYSC controller driver that registers a reset controller driver on
>> auxiliary bus which allows USB, PCIE drivers to control these signals.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Thanks for your patch!
>
>> --- /dev/null
>> +++ b/drivers/reset/reset-rzg3s-sysc.c
>> @@ -0,0 +1,140 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Renesas RZ/G3S SYSC reset driver
>> + *
>> + * Copyright (C) 2024 Renesas Electronics Corp.
>> + */
>> +
>> +#include <linux/auxiliary_bus.h>
>
> Using the Auxiliary Bus requires selecting AUXILIARY_BUS.
Thank you for pointing it. I'll adjust it in the next version, if it will
be one.
> Elsse you might run into build failures:
>
> aarch64-linux-gnu-ld: drivers/soc/renesas/rzg3s-sysc.o: in function
> `rzg3s_sysc_probe':
> rzg3s-sysc.c:(.text+0x21c): undefined reference to `auxiliary_device_init'
> aarch64-linux-gnu-ld: rzg3s-sysc.c:(.text+0x264): undefined reference
> to `__auxiliary_device_add'
> aarch64-linux-gnu-ld: drivers/reset/reset-rzg3s-sysc.o: in function
> `rzg3s_sysc_reset_driver_init':
> reset-rzg3s-sysc.c:(.init.text+0x1c): undefined reference to
> `__auxiliary_driver_register'
> aarch64-linux-gnu-ld: drivers/reset/reset-rzg3s-sysc.o: in function
> `rzg3s_sysc_reset_driver_exit':
> reset-rzg3s-sysc.c:(.exit.text+0x10): undefined reference to
> `auxiliary_driver_unregister'
>
> Gr{oetje,eeting}s,
>
> Geert
>
WARNING: multiple messages have this Message-ID (diff)
From: claudiu beznea <claudiu.beznea@tuxon.dev>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: vkoul@kernel.org, kishon@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, p.zabel@pengutronix.de,
geert+renesas@glider.be, magnus.damm@gmail.com,
gregkh@linuxfoundation.org, mturquette@baylibre.com,
sboyd@kernel.org, yoshihiro.shimoda.uh@renesas.com,
biju.das.jz@bp.renesas.com, ulf.hansson@linaro.org,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Subject: Re: [PATCH 04/16] soc: renesas: Add SYSC driver for Renesas RZ/G3S
Date: Wed, 25 Sep 2024 10:50:24 +0300 [thread overview]
Message-ID: <23531a70-cf50-4b32-a9fd-81e6cfcbcf9d@tuxon.dev> (raw)
In-Reply-To: <CAMuHMdVQsHx0nC3xwQWVRWyWMnbXd1=RokNn8rkJv3bfG_0p-A@mail.gmail.com>
Hi, Geert,
On 24.09.2024 14:32, Geert Uytterhoeven wrote:
> Hi Claudiu,
>
> On Thu, Aug 22, 2024 at 5:28 PM Claudiu <claudiu.beznea@tuxon.dev> wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>
>> The RZ/G3S SYS Controller has 2 registers (one for PCIE one for USB) that
>> need to be configured before/after powering off/on the PCI or USB
>> ares. The bits in these registers control signals to PCIE and USB that
>> need to be de-asserted/asserted after/before power on/off event. For this
>> add SYSC controller driver that registers a reset controller driver on
>> auxiliary bus which allows USB, PCIE drivers to control these signals.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Thanks for your patch!
>
>> --- /dev/null
>> +++ b/drivers/reset/reset-rzg3s-sysc.c
>> @@ -0,0 +1,140 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Renesas RZ/G3S SYSC reset driver
>> + *
>> + * Copyright (C) 2024 Renesas Electronics Corp.
>> + */
>> +
>> +#include <linux/auxiliary_bus.h>
>
> Using the Auxiliary Bus requires selecting AUXILIARY_BUS.
Thank you for pointing it. I'll adjust it in the next version, if it will
be one.
> Elsse you might run into build failures:
>
> aarch64-linux-gnu-ld: drivers/soc/renesas/rzg3s-sysc.o: in function
> `rzg3s_sysc_probe':
> rzg3s-sysc.c:(.text+0x21c): undefined reference to `auxiliary_device_init'
> aarch64-linux-gnu-ld: rzg3s-sysc.c:(.text+0x264): undefined reference
> to `__auxiliary_device_add'
> aarch64-linux-gnu-ld: drivers/reset/reset-rzg3s-sysc.o: in function
> `rzg3s_sysc_reset_driver_init':
> reset-rzg3s-sysc.c:(.init.text+0x1c): undefined reference to
> `__auxiliary_driver_register'
> aarch64-linux-gnu-ld: drivers/reset/reset-rzg3s-sysc.o: in function
> `rzg3s_sysc_reset_driver_exit':
> reset-rzg3s-sysc.c:(.exit.text+0x10): undefined reference to
> `auxiliary_driver_unregister'
>
> Gr{oetje,eeting}s,
>
> Geert
>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2024-09-25 7:50 UTC|newest]
Thread overview: 196+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-22 15:27 [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC Claudiu
2024-08-22 15:27 ` Claudiu
2024-08-22 15:27 ` [PATCH 01/16] clk: renesas: r9a08g045: Add clocks, resets and power domains for USB Claudiu
2024-08-22 15:27 ` Claudiu
2024-08-29 12:35 ` Geert Uytterhoeven
2024-08-29 12:35 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S Claudiu
2024-08-22 15:27 ` Claudiu
2024-08-22 16:42 ` Conor Dooley
2024-08-22 16:42 ` Conor Dooley
2024-08-22 16:44 ` Conor Dooley
2024-08-22 16:44 ` Conor Dooley
2024-08-23 7:59 ` claudiu beznea
2024-08-23 7:59 ` claudiu beznea
2024-08-23 7:54 ` claudiu beznea
2024-08-23 7:54 ` claudiu beznea
2024-08-23 16:18 ` Conor Dooley
2024-08-23 16:18 ` Conor Dooley
2024-08-23 16:26 ` claudiu beznea
2024-08-23 16:26 ` claudiu beznea
2024-08-23 16:33 ` Conor Dooley
2024-08-23 16:33 ` Conor Dooley
2024-08-26 10:15 ` claudiu beznea
2024-08-26 10:15 ` claudiu beznea
2024-08-26 17:09 ` Conor Dooley
2024-08-26 17:09 ` Conor Dooley
2024-10-08 13:24 ` Geert Uytterhoeven
2024-10-08 13:24 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 03/16] dt-bindings: reset: renesas,r9a08g045-sysc: Add reset IDs for RZ/G3S SYSC reset Claudiu
2024-08-22 15:27 ` Claudiu
2024-08-22 16:45 ` Conor Dooley
2024-08-22 16:45 ` Conor Dooley
2024-10-08 13:25 ` Geert Uytterhoeven
2024-10-08 13:25 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 04/16] soc: renesas: Add SYSC driver for Renesas RZ/G3S Claudiu
2024-08-22 15:27 ` Claudiu
2024-09-24 11:32 ` Geert Uytterhoeven
2024-09-24 11:32 ` Geert Uytterhoeven
2024-09-25 7:50 ` claudiu beznea [this message]
2024-09-25 7:50 ` claudiu beznea
2024-10-08 13:54 ` Geert Uytterhoeven
2024-10-08 13:54 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 05/16] soc: renesas: sysc: Move RZ/G3S SoC detection on SYSC driver Claudiu
2024-08-22 15:27 ` Claudiu
2024-10-08 13:23 ` Geert Uytterhoeven
2024-10-08 13:23 ` Geert Uytterhoeven
2024-10-09 8:26 ` claudiu beznea
2024-10-09 8:26 ` claudiu beznea
2024-08-22 15:27 ` [PATCH 06/16] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S SoC Claudiu
2024-08-22 15:27 ` Claudiu
2024-08-22 16:45 ` Conor Dooley
2024-08-22 16:45 ` Conor Dooley
2024-10-08 14:46 ` Geert Uytterhoeven
2024-10-08 14:46 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array Claudiu
2024-08-22 15:27 ` Claudiu
2024-08-23 7:25 ` Biju Das
2024-08-23 7:25 ` Biju Das
2024-08-23 8:05 ` claudiu beznea
2024-08-23 8:05 ` claudiu beznea
2024-08-23 8:17 ` Biju Das
2024-08-23 8:17 ` Biju Das
2024-10-08 14:46 ` Geert Uytterhoeven
2024-10-08 14:46 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S Claudiu
2024-08-22 15:27 ` Claudiu
2024-08-22 16:59 ` Biju Das
2024-08-22 16:59 ` Biju Das
2024-08-23 8:40 ` claudiu beznea
2024-08-23 8:40 ` claudiu beznea
2024-08-23 8:46 ` Biju Das
2024-08-23 8:46 ` Biju Das
2024-10-08 14:47 ` Geert Uytterhoeven
2024-10-08 14:47 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 09/16] dt-bindings: usb: renesas,usbhs: Document RZ/G3S SoC Claudiu
2024-08-22 15:27 ` Claudiu
2024-08-22 16:46 ` Conor Dooley
2024-08-22 16:46 ` Conor Dooley
2024-10-08 14:51 ` Geert Uytterhoeven
2024-10-08 14:51 ` Geert Uytterhoeven
2024-10-09 8:28 ` claudiu beznea
2024-10-09 8:28 ` claudiu beznea
2024-08-22 15:27 ` [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus Claudiu
2024-08-22 15:27 ` Claudiu
2024-08-23 7:35 ` Biju Das
2024-08-23 7:35 ` Biju Das
2024-08-23 8:57 ` claudiu beznea
2024-08-23 8:57 ` claudiu beznea
2024-08-23 9:01 ` Biju Das
2024-08-23 9:01 ` Biju Das
2024-08-30 8:02 ` Vinod Koul
2024-08-30 8:02 ` Vinod Koul
2024-08-30 8:06 ` Biju Das
2024-08-30 8:06 ` Biju Das
2024-10-08 14:57 ` Geert Uytterhoeven
2024-10-08 14:57 ` Geert Uytterhoeven
2024-10-09 8:31 ` claudiu beznea
2024-10-09 8:31 ` claudiu beznea
2024-08-22 15:27 ` [PATCH 11/16] dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings Claudiu
2024-08-22 15:27 ` Claudiu
2024-08-22 16:46 ` Conor Dooley
2024-08-22 16:46 ` Conor Dooley
2024-10-08 14:58 ` Geert Uytterhoeven
2024-10-08 14:58 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 12/16] phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC Claudiu
2024-08-22 15:27 ` Claudiu
2024-10-08 14:59 ` Geert Uytterhoeven
2024-10-08 14:59 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 13/16] arm64: dts: renesas: Add #reset-cells to system controller node Claudiu
2024-08-22 15:27 ` Claudiu
2024-10-08 14:59 ` Geert Uytterhoeven
2024-10-08 14:59 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 14/16] arm64: dts: renesas: r9a08g045: Add USB support Claudiu
2024-08-22 15:27 ` Claudiu
2024-10-08 15:00 ` Geert Uytterhoeven
2024-10-08 15:00 ` Geert Uytterhoeven
2024-08-22 15:28 ` [PATCH 15/16] arm64: dts: renesas: rzg3s-smarc: Enable " Claudiu
2024-08-22 15:28 ` Claudiu
2024-10-08 15:16 ` Geert Uytterhoeven
2024-10-08 15:16 ` Geert Uytterhoeven
2024-10-09 8:42 ` claudiu beznea
2024-10-09 8:42 ` claudiu beznea
2024-08-22 15:28 ` [PATCH 16/16] arm64: defconfig: Enable RZ/G3S SYSC reset driver Claudiu
2024-08-22 15:28 ` Claudiu
2024-10-08 15:17 ` Geert Uytterhoeven
2024-10-08 15:17 ` Geert Uytterhoeven
2024-08-29 15:26 ` [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC Ulf Hansson
2024-08-29 15:26 ` Ulf Hansson
2024-08-30 8:22 ` claudiu beznea
2024-08-30 8:22 ` claudiu beznea
2024-08-30 10:14 ` Ulf Hansson
2024-08-30 10:14 ` Ulf Hansson
2024-08-30 11:32 ` claudiu beznea
2024-08-30 11:32 ` claudiu beznea
2024-08-31 10:32 ` Ulf Hansson
2024-08-31 10:32 ` Ulf Hansson
2024-09-03 10:35 ` Ulf Hansson
2024-09-03 10:35 ` Ulf Hansson
2024-09-03 10:58 ` claudiu beznea
2024-09-03 10:58 ` claudiu beznea
2024-09-03 11:50 ` Ulf Hansson
2024-09-03 11:50 ` Ulf Hansson
2024-08-31 5:13 ` Biju Das
2024-08-31 5:13 ` Biju Das
2024-09-02 7:54 ` Biju Das
2024-09-02 7:54 ` Biju Das
2024-09-02 8:47 ` claudiu beznea
2024-09-02 8:47 ` claudiu beznea
2024-09-02 8:53 ` Biju Das
2024-09-02 8:53 ` Biju Das
2024-09-02 9:14 ` claudiu beznea
2024-09-02 9:14 ` claudiu beznea
2024-09-02 9:18 ` Biju Das
2024-09-02 9:18 ` Biju Das
2024-09-02 10:40 ` claudiu beznea
2024-09-02 10:40 ` claudiu beznea
2024-09-02 10:47 ` Biju Das
2024-09-02 10:47 ` Biju Das
2024-09-03 7:18 ` Biju Das
2024-09-03 7:18 ` Biju Das
2024-09-03 10:25 ` claudiu beznea
2024-09-03 10:25 ` claudiu beznea
2024-09-03 10:31 ` Biju Das
2024-09-03 10:31 ` Biju Das
2024-09-03 11:00 ` claudiu beznea
2024-09-03 11:00 ` claudiu beznea
2024-09-03 11:07 ` Biju Das
2024-09-03 11:07 ` Biju Das
2024-09-03 12:00 ` Biju Das
2024-09-03 12:00 ` Biju Das
2024-09-03 12:25 ` claudiu beznea
2024-09-03 12:25 ` claudiu beznea
2024-09-03 12:37 ` Biju Das
2024-09-03 12:37 ` Biju Das
2024-09-03 12:57 ` claudiu beznea
2024-09-03 12:57 ` claudiu beznea
2024-09-03 13:09 ` Biju Das
2024-09-03 13:09 ` Biju Das
2024-09-03 14:46 ` claudiu beznea
2024-09-03 14:46 ` claudiu beznea
2024-09-03 15:30 ` Biju Das
2024-09-03 15:30 ` Biju Das
2024-09-03 13:45 ` Biju Das
2024-09-03 13:45 ` Biju Das
2024-09-03 14:48 ` claudiu beznea
2024-09-03 14:48 ` claudiu beznea
2024-11-07 10:00 ` Claudiu Beznea
2024-11-07 10:00 ` Claudiu Beznea
2024-11-07 16:22 ` Philipp Zabel
2024-11-07 16:22 ` Philipp Zabel
2024-09-03 10:19 ` claudiu beznea
2024-09-03 10:19 ` claudiu beznea
2024-09-02 8:28 ` claudiu beznea
2024-09-02 8:28 ` claudiu beznea
2024-08-30 8:10 ` (subset) " Vinod Koul
2024-08-30 8:10 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=23531a70-cf50-4b32-a9fd-81e6cfcbcf9d@tuxon.dev \
--to=claudiu.beznea@tuxon.dev \
--cc=biju.das.jz@bp.renesas.com \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=geert@linux-m68k.org \
--cc=gregkh@linuxfoundation.org \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=vkoul@kernel.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.