Re: [PATCH v13] ath10k: add LED and GPIO controlling support for various chipsets

From: Sven Eckelmann <sven@narfation.org>
To: ath10k@lists.infradead.org, John Crispin <john@phrozen.org>,
	Ansuel Smith <ansuelsmth@gmail.com>,
	openwrt-devel@lists.openwrt.org
Cc: Sebastian Gottschall <s.gottschall@newmedia-net.de>,
	linux-wireless@vger.kernel.org,
	Sebastian Gottschall <s.gottschall@dd-wrt.com>,
	Kalle Valo <kvalo@codeaurora.org>
Subject: Re: [PATCH v13] ath10k: add LED and GPIO controlling support for various chipsets
Date: Tue, 26 Feb 2019 10:16:05 +0100	[thread overview]
Message-ID: <2468724.JaAZLprVu6@bentobox> (raw)
In-Reply-To: <1523027875-5143-1-git-send-email-kvalo@codeaurora.org>

[-- Attachment #1.1: Type: text/plain, Size: 3025 bytes --]

On Friday, 6 April 2018 17:17:55 CET Kalle Valo wrote:
> From: Sebastian Gottschall <s.gottschall@newmedia-net.de>
> 
> Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based
> chipsets with on chipset connected led's using WMI Firmware API.  The LED
> device will get available named as "ath10k-phyX" at sysfs and can be controlled
> with various triggers.  adds also debugfs interface for gpio control.
> 
> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
> Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
> [kvalo: major reorg and cleanup]
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

This patch was imported to OpenWrt in commit 61d57a2f88b9 ("mac80211: ath10k 
add leds support") and broke the 11s support for IPQ4019 and QCA4019 (5GHz) 
firmware versions 10.4-3.5.3-00053, 10.4-3.5.3-00057, 10.4-3.6-00140:

    [  221.620803] ath10k_pci 0000:01:00.0: wmi command 36967 timeout, restarting hardware
    [  221.744056] ieee80211 phy0: Hardware restart was requested
    [  225.130829] ath10k_pci 0000:01:00.0: failed to receive control response completion, polling..
    [  226.170824] ath10k_pci 0000:01:00.0: Service connect timeout
    [  226.170871] ath10k_pci 0000:01:00.0: failed to connect htt (-110)
    [  226.252248] ath10k_pci 0000:01:00.0: Could not init core: -110

This was tested on an A62 with following wireless config:

    config wifi-device 'radio0'
            option type 'mac80211'
            option channel '36'
            option hwmode '11a'
            option path 'soc/40000000.pci/pci0000:00/0000:00:00.0/0000:01:00.0'
            option htmode 'VHT80'
            option disabled '0'
            option country US

    config wifi-device 'radio1'
            option type 'mac80211'
            option channel '11'
            option hwmode '11g'
            option path 'platform/soc/a000000.wifi'
            option htmode 'HT20'
            option disabled '0'
            option country US

    config wifi-device 'radio2'
            option type 'mac80211'
            option channel '149'
            option hwmode '11a'
            option path 'platform/soc/a800000.wifi'
            option htmode 'VHT80'
            option disabled '0'
            option country US

    config wifi-iface 'mesh0'
        option device 'radio0'
        option ifname 'mesh0'
        option network 'nwi_mesh0'
        option mode 'mesh'
        option mesh_id 'TestMesh'
        option mesh_fwding '1'
        option encryption 'none'

    config wifi-iface 'mesh1'
        option device 'radio1'
        option ifname 'mesh1'
        option network 'nwi_mesh1'
        option mode 'mesh'
        option mesh_id 'TestMesh'
        option encryption 'none'

    config wifi-iface 'mesh2'
        option device 'radio2'
        option ifname 'mesh2'
        option network 'nwi_mesh2'
        option mode 'mesh'
        option mesh_id 'TestMesh'
        option mesh_fwding '1'
        option encryption 'none

Kind regards,
	Sven

[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k