[PATCH v5 0/4] ARM: dts: da850: tilcdc related DT changes

[PATCH v5 0/4] ARM: dts: da850: tilcdc related DT changes

[Bartosz Golaszewski]

This series contains the last DT changes required for LCDC support
on da850-lcdk. The first one adds the dumb-vga-dac nodes, the second
limits the maximum pixel clock rate.

v1 -> v2:
- drop patch 3/3 (already merged)
- use max-pixelclock instead of max-bandwidth for display mode limiting

v2 -> v3:
- make the commit message in patch [2/2] more detailed
- move the max-pixelclock property to da850.dtsi as the limit
  affects all da850-based boards

v3 -> v4:
- remove the input port from the display node
- move the display ports node to da850-lcdk.dts
- rename the vga_bridge node to vga-bridge
- move the LCDC pins to the LCDC node (from the vga bridge node)

v4 -> v5:
- rename the display label to lcdc
- instead of using the 'dumb-vga-dac' compatible, add bindings for
  ti,ths8135 and use it as the vga-bridge node compatible

Bartosz Golaszewski (4):
  ARM: dts: da850: rename the display node label
  drm: bridge: add support for TI ths8135
  ARM: dts: da850-lcdk: add the vga-bridge node
  ARM: dts: da850: specify the maximum pixel clock rate for tilcdc

 .../bindings/display/bridge/ti,ths8135.txt         | 52 +++++++++++++++++
 arch/arm/boot/dts/da850-lcdk.dts                   | 67 ++++++++++++++++++++++
 arch/arm/boot/dts/da850.dtsi                       |  3 +-
 drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
 4 files changed, 122 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt

-- 
2.9.3

[PATCH v5 0/4] ARM: dts: da850: tilcdc related DT changes

[Bartosz Golaszewski]

This series contains the last DT changes required for LCDC support
on da850-lcdk. The first one adds the dumb-vga-dac nodes, the second
limits the maximum pixel clock rate.

v1 -> v2:
- drop patch 3/3 (already merged)
- use max-pixelclock instead of max-bandwidth for display mode limiting

v2 -> v3:
- make the commit message in patch [2/2] more detailed
- move the max-pixelclock property to da850.dtsi as the limit
  affects all da850-based boards

v3 -> v4:
- remove the input port from the display node
- move the display ports node to da850-lcdk.dts
- rename the vga_bridge node to vga-bridge
- move the LCDC pins to the LCDC node (from the vga bridge node)

v4 -> v5:
- rename the display label to lcdc
- instead of using the 'dumb-vga-dac' compatible, add bindings for
  ti,ths8135 and use it as the vga-bridge node compatible

Bartosz Golaszewski (4):
  ARM: dts: da850: rename the display node label
  drm: bridge: add support for TI ths8135
  ARM: dts: da850-lcdk: add the vga-bridge node
  ARM: dts: da850: specify the maximum pixel clock rate for tilcdc

 .../bindings/display/bridge/ti,ths8135.txt         | 52 +++++++++++++++++
 arch/arm/boot/dts/da850-lcdk.dts                   | 67 ++++++++++++++++++++++
 arch/arm/boot/dts/da850.dtsi                       |  3 +-
 drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
 4 files changed, 122 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt

-- 
2.9.3

[PATCH v5 0/4] ARM: dts: da850: tilcdc related DT changes

[Bartosz Golaszewski]

This series contains the last DT changes required for LCDC support
on da850-lcdk. The first one adds the dumb-vga-dac nodes, the second
limits the maximum pixel clock rate.

v1 -> v2:
- drop patch 3/3 (already merged)
- use max-pixelclock instead of max-bandwidth for display mode limiting

v2 -> v3:
- make the commit message in patch [2/2] more detailed
- move the max-pixelclock property to da850.dtsi as the limit
  affects all da850-based boards

v3 -> v4:
- remove the input port from the display node
- move the display ports node to da850-lcdk.dts
- rename the vga_bridge node to vga-bridge
- move the LCDC pins to the LCDC node (from the vga bridge node)

v4 -> v5:
- rename the display label to lcdc
- instead of using the 'dumb-vga-dac' compatible, add bindings for
  ti,ths8135 and use it as the vga-bridge node compatible

Bartosz Golaszewski (4):
  ARM: dts: da850: rename the display node label
  drm: bridge: add support for TI ths8135
  ARM: dts: da850-lcdk: add the vga-bridge node
  ARM: dts: da850: specify the maximum pixel clock rate for tilcdc

 .../bindings/display/bridge/ti,ths8135.txt         | 52 +++++++++++++++++
 arch/arm/boot/dts/da850-lcdk.dts                   | 67 ++++++++++++++++++++++
 arch/arm/boot/dts/da850.dtsi                       |  3 +-
 drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
 4 files changed, 122 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt

-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v5 1/4] ARM: dts: da850: rename the display node label

[Bartosz Golaszewski]

The tilcdc node name is 'display' as per the ePAPR 1.1 recommendation.
The label is also 'display', but change it to 'lcdc' to make it clear
what the underlying hardware is.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index ffc6e1a..3f51e59 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -448,7 +448,7 @@
 			dma-names = "tx", "rx";
 		};
 
-		display: display at 213000 {
+		lcdc: display at 213000 {
 			compatible = "ti,da850-tilcdc";
 			reg = <0x213000 0x1000>;
 			interrupts = <52>;
-- 
2.9.3

[PATCH v5 1/4] ARM: dts: da850: rename the display node label

[Bartosz Golaszewski]

The tilcdc node name is 'display' as per the ePAPR 1.1 recommendation.
The label is also 'display', but change it to 'lcdc' to make it clear
what the underlying hardware is.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index ffc6e1a..3f51e59 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -448,7 +448,7 @@
 			dma-names = "tx", "rx";
 		};
 
-		display: display@213000 {
+		lcdc: display@213000 {
 			compatible = "ti,da850-tilcdc";
 			reg = <0x213000 0x1000>;
 			interrupts = <52>;
-- 
2.9.3

[PATCH v5 1/4] ARM: dts: da850: rename the display node label

[Bartosz Golaszewski]

The tilcdc node name is 'display' as per the ePAPR 1.1 recommendation.
The label is also 'display', but change it to 'lcdc' to make it clear
what the underlying hardware is.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index ffc6e1a..3f51e59 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -448,7 +448,7 @@
 			dma-names = "tx", "rx";
 		};
 
-		display: display@213000 {
+		lcdc: display@213000 {
 			compatible = "ti,da850-tilcdc";
 			reg = <0x213000 0x1000>;
 			interrupts = <52>;
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v5 2/4] drm: bridge: add support for TI ths8135

[Bartosz Golaszewski]

THS8135 is a configurable video DAC. Add DT bindings for this chip and
use the dumb-vga-dac driver for now as no configuration is required to
make it work.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 .../bindings/display/bridge/ti,ths8135.txt         | 52 ++++++++++++++++++++++
 drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
 2 files changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
new file mode 100644
index 0000000..23cd8ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
@@ -0,0 +1,52 @@
+THS8135 Video DAC
+-----------------
+
+This is the binding for Texas Instruments THS8135 Video DAC bridge.
+
+Required properties:
+
+- compatible: Must be "ti,ths8135"
+
+Required nodes:
+
+This device has two video ports. Their connections are modelled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for RGB input
+- Video port 1 for VGA output
+
+Example
+-------
+
+vga-bridge {
+	compatible = "ti,ths8135";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			vga_bridge_in: endpoint at 0 {
+				reg = <0>;
+				remote-endpoint = <&lcdc_out_vga>;
+			};
+		};
+
+		port at 1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			vga_bridge_out: endpoint at 0 {
+				reg = <0>;
+				remote-endpoint = <&vga_con_in>;
+			};
+		};
+	};
+};
diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
index afec232..498fa75 100644
--- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
+++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
@@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
 
 static const struct of_device_id dumb_vga_match[] = {
 	{ .compatible = "dumb-vga-dac" },
+	{ .compatible = "ti,ths8135" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, dumb_vga_match);
-- 
2.9.3

[PATCH v5 2/4] drm: bridge: add support for TI ths8135

[Bartosz Golaszewski]

THS8135 is a configurable video DAC. Add DT bindings for this chip and
use the dumb-vga-dac driver for now as no configuration is required to
make it work.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 .../bindings/display/bridge/ti,ths8135.txt         | 52 ++++++++++++++++++++++
 drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
 2 files changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
new file mode 100644
index 0000000..23cd8ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
@@ -0,0 +1,52 @@
+THS8135 Video DAC
+-----------------
+
+This is the binding for Texas Instruments THS8135 Video DAC bridge.
+
+Required properties:
+
+- compatible: Must be "ti,ths8135"
+
+Required nodes:
+
+This device has two video ports. Their connections are modelled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for RGB input
+- Video port 1 for VGA output
+
+Example
+-------
+
+vga-bridge {
+	compatible = "ti,ths8135";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			vga_bridge_in: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&lcdc_out_vga>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			vga_bridge_out: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vga_con_in>;
+			};
+		};
+	};
+};
diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
index afec232..498fa75 100644
--- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
+++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
@@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
 
 static const struct of_device_id dumb_vga_match[] = {
 	{ .compatible = "dumb-vga-dac" },
+	{ .compatible = "ti,ths8135" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, dumb_vga_match);
-- 
2.9.3

[PATCH v5 2/4] drm: bridge: add support for TI ths8135

[Bartosz Golaszewski]

THS8135 is a configurable video DAC. Add DT bindings for this chip and
use the dumb-vga-dac driver for now as no configuration is required to
make it work.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 .../bindings/display/bridge/ti,ths8135.txt         | 52 ++++++++++++++++++++++
 drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
 2 files changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
new file mode 100644
index 0000000..23cd8ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
@@ -0,0 +1,52 @@
+THS8135 Video DAC
+-----------------
+
+This is the binding for Texas Instruments THS8135 Video DAC bridge.
+
+Required properties:
+
+- compatible: Must be "ti,ths8135"
+
+Required nodes:
+
+This device has two video ports. Their connections are modelled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for RGB input
+- Video port 1 for VGA output
+
+Example
+-------
+
+vga-bridge {
+	compatible = "ti,ths8135";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			vga_bridge_in: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&lcdc_out_vga>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			vga_bridge_out: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vga_con_in>;
+			};
+		};
+	};
+};
diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
index afec232..498fa75 100644
--- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
+++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
@@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
 
 static const struct of_device_id dumb_vga_match[] = {
 	{ .compatible = "dumb-vga-dac" },
+	{ .compatible = "ti,ths8135" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, dumb_vga_match);
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v5 2/4] drm: bridge: add support for TI ths8135

[Bartosz Golaszewski]

2016-12-07 11:42 GMT+01:00 Bartosz Golaszewski <bgolaszewski@baylibre.com>:
> THS8135 is a configurable video DAC. Add DT bindings for this chip and
> use the dumb-vga-dac driver for now as no configuration is required to
> make it work.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  .../bindings/display/bridge/ti,ths8135.txt         | 52 ++++++++++++++++++++++
>  drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
>  2 files changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> new file mode 100644
> index 0000000..23cd8ee
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> @@ -0,0 +1,52 @@
> +THS8135 Video DAC
> +-----------------
> +
> +This is the binding for Texas Instruments THS8135 Video DAC bridge.
> +
> +Required properties:
> +
> +- compatible: Must be "ti,ths8135"
> +
> +Required nodes:
> +
> +This device has two video ports. Their connections are modelled using the OF
> +graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> +
> +- Video port 0 for RGB input
> +- Video port 1 for VGA output
> +
> +Example
> +-------
> +
> +vga-bridge {
> +       compatible = "ti,ths8135";
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +
> +       ports {
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               port at 0 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <0>;
> +
> +                       vga_bridge_in: endpoint at 0 {
> +                               reg = <0>;
> +                               remote-endpoint = <&lcdc_out_vga>;
> +                       };
> +               };
> +
> +               port at 1 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <1>;
> +
> +                       vga_bridge_out: endpoint at 0 {
> +                               reg = <0>;
> +                               remote-endpoint = <&vga_con_in>;
> +                       };
> +               };
> +       };
> +};
> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> index afec232..498fa75 100644
> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> @@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
>
>  static const struct of_device_id dumb_vga_match[] = {
>         { .compatible = "dumb-vga-dac" },
> +       { .compatible = "ti,ths8135" },
>         {},
>  };
>  MODULE_DEVICE_TABLE(of, dumb_vga_match);
> --
> 2.9.3
>

+ Maxime

Sorry, I forgot to include your e-mail.

Bartosz

Re: [PATCH v5 2/4] drm: bridge: add support for TI ths8135

[Bartosz Golaszewski]

2016-12-07 11:42 GMT+01:00 Bartosz Golaszewski <bgolaszewski@baylibre.com>:
> THS8135 is a configurable video DAC. Add DT bindings for this chip and
> use the dumb-vga-dac driver for now as no configuration is required to
> make it work.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  .../bindings/display/bridge/ti,ths8135.txt         | 52 ++++++++++++++++++++++
>  drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
>  2 files changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> new file mode 100644
> index 0000000..23cd8ee
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> @@ -0,0 +1,52 @@
> +THS8135 Video DAC
> +-----------------
> +
> +This is the binding for Texas Instruments THS8135 Video DAC bridge.
> +
> +Required properties:
> +
> +- compatible: Must be "ti,ths8135"
> +
> +Required nodes:
> +
> +This device has two video ports. Their connections are modelled using the OF
> +graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> +
> +- Video port 0 for RGB input
> +- Video port 1 for VGA output
> +
> +Example
> +-------
> +
> +vga-bridge {
> +       compatible = "ti,ths8135";
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +
> +       ports {
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               port@0 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <0>;
> +
> +                       vga_bridge_in: endpoint@0 {
> +                               reg = <0>;
> +                               remote-endpoint = <&lcdc_out_vga>;
> +                       };
> +               };
> +
> +               port@1 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <1>;
> +
> +                       vga_bridge_out: endpoint@0 {
> +                               reg = <0>;
> +                               remote-endpoint = <&vga_con_in>;
> +                       };
> +               };
> +       };
> +};
> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> index afec232..498fa75 100644
> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> @@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
>
>  static const struct of_device_id dumb_vga_match[] = {
>         { .compatible = "dumb-vga-dac" },
> +       { .compatible = "ti,ths8135" },
>         {},
>  };
>  MODULE_DEVICE_TABLE(of, dumb_vga_match);
> --
> 2.9.3
>

+ Maxime

Sorry, I forgot to include your e-mail.

Bartosz

Re: [PATCH v5 2/4] drm: bridge: add support for TI ths8135

[Bartosz Golaszewski]

2016-12-07 11:42 GMT+01:00 Bartosz Golaszewski <bgolaszewski@baylibre.com>:
> THS8135 is a configurable video DAC. Add DT bindings for this chip and
> use the dumb-vga-dac driver for now as no configuration is required to
> make it work.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  .../bindings/display/bridge/ti,ths8135.txt         | 52 ++++++++++++++++++++++
>  drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
>  2 files changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> new file mode 100644
> index 0000000..23cd8ee
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> @@ -0,0 +1,52 @@
> +THS8135 Video DAC
> +-----------------
> +
> +This is the binding for Texas Instruments THS8135 Video DAC bridge.
> +
> +Required properties:
> +
> +- compatible: Must be "ti,ths8135"
> +
> +Required nodes:
> +
> +This device has two video ports. Their connections are modelled using the OF
> +graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> +
> +- Video port 0 for RGB input
> +- Video port 1 for VGA output
> +
> +Example
> +-------
> +
> +vga-bridge {
> +       compatible = "ti,ths8135";
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +
> +       ports {
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               port@0 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <0>;
> +
> +                       vga_bridge_in: endpoint@0 {
> +                               reg = <0>;
> +                               remote-endpoint = <&lcdc_out_vga>;
> +                       };
> +               };
> +
> +               port@1 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <1>;
> +
> +                       vga_bridge_out: endpoint@0 {
> +                               reg = <0>;
> +                               remote-endpoint = <&vga_con_in>;
> +                       };
> +               };
> +       };
> +};
> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> index afec232..498fa75 100644
> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> @@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
>
>  static const struct of_device_id dumb_vga_match[] = {
>         { .compatible = "dumb-vga-dac" },
> +       { .compatible = "ti,ths8135" },
>         {},
>  };
>  MODULE_DEVICE_TABLE(of, dumb_vga_match);
> --
> 2.9.3
>

+ Maxime

Sorry, I forgot to include your e-mail.

Bartosz
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v5 2/4] drm: bridge: add support for TI ths8135

[Laurent Pinchart]

Hi Bartosz,

Thank you for the patch.

On Wednesday 07 Dec 2016 11:45:11 Bartosz Golaszewski wrote:
> 2016-12-07 11:42 GMT+01:00 Bartosz Golaszewski <bgolaszewski@baylibre.com>:
> > THS8135 is a configurable video DAC. Add DT bindings for this chip and
> > use the dumb-vga-dac driver for now as no configuration is required to
> > make it work.
> > 
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > ---
> > 
> >  .../bindings/display/bridge/ti,ths8135.txt         | 52 +++++++++++++++++
> >  drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +

You might be asked by DT maintainers to split this in two, but regardless of 
whether it's one patch or two, you can add my

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> >  2 files changed, 53 insertions(+)
> >  create mode 100644
> >  Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt> 
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> > b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt new
> > file mode 100644
> > index 0000000..23cd8ee
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> > @@ -0,0 +1,52 @@
> > +THS8135 Video DAC
> > +-----------------
> > +
> > +This is the binding for Texas Instruments THS8135 Video DAC bridge.
> > +
> > +Required properties:
> > +
> > +- compatible: Must be "ti,ths8135"
> > +
> > +Required nodes:
> > +
> > +This device has two video ports. Their connections are modelled using the
> > OF +graph bindings specified in
> > Documentation/devicetree/bindings/graph.txt. +
> > +- Video port 0 for RGB input
> > +- Video port 1 for VGA output
> > +
> > +Example
> > +-------
> > +
> > +vga-bridge {
> > +       compatible = "ti,ths8135";
> > +       #address-cells = <1>;
> > +       #size-cells = <0>;
> > +
> > +       ports {
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +
> > +               port at 0 {
> > +                       #address-cells = <1>;
> > +                       #size-cells = <0>;
> > +                       reg = <0>;
> > +
> > +                       vga_bridge_in: endpoint at 0 {
> > +                               reg = <0>;
> > +                               remote-endpoint = <&lcdc_out_vga>;
> > +                       };
> > +               };
> > +
> > +               port at 1 {
> > +                       #address-cells = <1>;
> > +                       #size-cells = <0>;
> > +                       reg = <1>;
> > +
> > +                       vga_bridge_out: endpoint at 0 {
> > +                               reg = <0>;
> > +                               remote-endpoint = <&vga_con_in>;
> > +                       };
> > +               };
> > +       };
> > +};
> > diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > b/drivers/gpu/drm/bridge/dumb-vga-dac.c index afec232..498fa75 100644
> > --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > @@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device
> > *pdev)> 
> >  static const struct of_device_id dumb_vga_match[] = {
> >  
> >         { .compatible = "dumb-vga-dac" },
> > 
> > +       { .compatible = "ti,ths8135" },
> > 
> >         {},
> >  
> >  };
> >  MODULE_DEVICE_TABLE(of, dumb_vga_match);
> > 
> > --
> > 2.9.3
> 
> + Maxime
> 
> Sorry, I forgot to include your e-mail.
> 
> Bartosz

-- 
Regards,

Laurent Pinchart

Re: [PATCH v5 2/4] drm: bridge: add support for TI ths8135

[Laurent Pinchart]

Hi Bartosz,

Thank you for the patch.

On Wednesday 07 Dec 2016 11:45:11 Bartosz Golaszewski wrote:
> 2016-12-07 11:42 GMT+01:00 Bartosz Golaszewski <bgolaszewski@baylibre.com>:
> > THS8135 is a configurable video DAC. Add DT bindings for this chip and
> > use the dumb-vga-dac driver for now as no configuration is required to
> > make it work.
> > 
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > ---
> > 
> >  .../bindings/display/bridge/ti,ths8135.txt         | 52 +++++++++++++++++
> >  drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +

You might be asked by DT maintainers to split this in two, but regardless of 
whether it's one patch or two, you can add my

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> >  2 files changed, 53 insertions(+)
> >  create mode 100644
> >  Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt> 
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> > b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt new
> > file mode 100644
> > index 0000000..23cd8ee
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> > @@ -0,0 +1,52 @@
> > +THS8135 Video DAC
> > +-----------------
> > +
> > +This is the binding for Texas Instruments THS8135 Video DAC bridge.
> > +
> > +Required properties:
> > +
> > +- compatible: Must be "ti,ths8135"
> > +
> > +Required nodes:
> > +
> > +This device has two video ports. Their connections are modelled using the
> > OF +graph bindings specified in
> > Documentation/devicetree/bindings/graph.txt. +
> > +- Video port 0 for RGB input
> > +- Video port 1 for VGA output
> > +
> > +Example
> > +-------
> > +
> > +vga-bridge {
> > +       compatible = "ti,ths8135";
> > +       #address-cells = <1>;
> > +       #size-cells = <0>;
> > +
> > +       ports {
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +
> > +               port@0 {
> > +                       #address-cells = <1>;
> > +                       #size-cells = <0>;
> > +                       reg = <0>;
> > +
> > +                       vga_bridge_in: endpoint@0 {
> > +                               reg = <0>;
> > +                               remote-endpoint = <&lcdc_out_vga>;
> > +                       };
> > +               };
> > +
> > +               port@1 {
> > +                       #address-cells = <1>;
> > +                       #size-cells = <0>;
> > +                       reg = <1>;
> > +
> > +                       vga_bridge_out: endpoint@0 {
> > +                               reg = <0>;
> > +                               remote-endpoint = <&vga_con_in>;
> > +                       };
> > +               };
> > +       };
> > +};
> > diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > b/drivers/gpu/drm/bridge/dumb-vga-dac.c index afec232..498fa75 100644
> > --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > @@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device
> > *pdev)> 
> >  static const struct of_device_id dumb_vga_match[] = {
> >  
> >         { .compatible = "dumb-vga-dac" },
> > 
> > +       { .compatible = "ti,ths8135" },
> > 
> >         {},
> >  
> >  };
> >  MODULE_DEVICE_TABLE(of, dumb_vga_match);
> > 
> > --
> > 2.9.3
> 
> + Maxime
> 
> Sorry, I forgot to include your e-mail.
> 
> Bartosz

-- 
Regards,

Laurent Pinchart

Re: [PATCH v5 2/4] drm: bridge: add support for TI ths8135

[Laurent Pinchart]

Hi Bartosz,

Thank you for the patch.

On Wednesday 07 Dec 2016 11:45:11 Bartosz Golaszewski wrote:
> 2016-12-07 11:42 GMT+01:00 Bartosz Golaszewski <bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>:
> > THS8135 is a configurable video DAC. Add DT bindings for this chip and
> > use the dumb-vga-dac driver for now as no configuration is required to
> > make it work.
> > 
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> > ---
> > 
> >  .../bindings/display/bridge/ti,ths8135.txt         | 52 +++++++++++++++++
> >  drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +

You might be asked by DT maintainers to split this in two, but regardless of 
whether it's one patch or two, you can add my

Reviewed-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>

> >  2 files changed, 53 insertions(+)
> >  create mode 100644
> >  Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt> 
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> > b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt new
> > file mode 100644
> > index 0000000..23cd8ee
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> > @@ -0,0 +1,52 @@
> > +THS8135 Video DAC
> > +-----------------
> > +
> > +This is the binding for Texas Instruments THS8135 Video DAC bridge.
> > +
> > +Required properties:
> > +
> > +- compatible: Must be "ti,ths8135"
> > +
> > +Required nodes:
> > +
> > +This device has two video ports. Their connections are modelled using the
> > OF +graph bindings specified in
> > Documentation/devicetree/bindings/graph.txt. +
> > +- Video port 0 for RGB input
> > +- Video port 1 for VGA output
> > +
> > +Example
> > +-------
> > +
> > +vga-bridge {
> > +       compatible = "ti,ths8135";
> > +       #address-cells = <1>;
> > +       #size-cells = <0>;
> > +
> > +       ports {
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +
> > +               port@0 {
> > +                       #address-cells = <1>;
> > +                       #size-cells = <0>;
> > +                       reg = <0>;
> > +
> > +                       vga_bridge_in: endpoint@0 {
> > +                               reg = <0>;
> > +                               remote-endpoint = <&lcdc_out_vga>;
> > +                       };
> > +               };
> > +
> > +               port@1 {
> > +                       #address-cells = <1>;
> > +                       #size-cells = <0>;
> > +                       reg = <1>;
> > +
> > +                       vga_bridge_out: endpoint@0 {
> > +                               reg = <0>;
> > +                               remote-endpoint = <&vga_con_in>;
> > +                       };
> > +               };
> > +       };
> > +};
> > diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > b/drivers/gpu/drm/bridge/dumb-vga-dac.c index afec232..498fa75 100644
> > --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > @@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device
> > *pdev)> 
> >  static const struct of_device_id dumb_vga_match[] = {
> >  
> >         { .compatible = "dumb-vga-dac" },
> > 
> > +       { .compatible = "ti,ths8135" },
> > 
> >         {},
> >  
> >  };
> >  MODULE_DEVICE_TABLE(of, dumb_vga_match);
> > 
> > --
> > 2.9.3
> 
> + Maxime
> 
> Sorry, I forgot to include your e-mail.
> 
> Bartosz

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 2/4] drm: bridge: add support for TI ths8135

[Rob Herring]

On Wed, Dec 07, 2016 at 11:42:43AM +0100, Bartosz Golaszewski wrote:
> THS8135 is a configurable video DAC. Add DT bindings for this chip and
> use the dumb-vga-dac driver for now as no configuration is required to
> make it work.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  .../bindings/display/bridge/ti,ths8135.txt         | 52 ++++++++++++++++++++++
>  drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
>  2 files changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt

Acked-by: Rob Herring <robh@kernel.org>

But one nit below:

> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> new file mode 100644
> index 0000000..23cd8ee
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> @@ -0,0 +1,52 @@
> +THS8135 Video DAC
> +-----------------
> +
> +This is the binding for Texas Instruments THS8135 Video DAC bridge.
> +
> +Required properties:
> +
> +- compatible: Must be "ti,ths8135"
> +
> +Required nodes:
> +
> +This device has two video ports. Their connections are modelled using the OF
> +graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> +
> +- Video port 0 for RGB input
> +- Video port 1 for VGA output
> +
> +Example
> +-------
> +
> +vga-bridge {
> +	compatible = "ti,ths8135";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port at 0 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0>;
> +
> +			vga_bridge_in: endpoint at 0 {
> +				reg = <0>;

You don't need reg here.

> +				remote-endpoint = <&lcdc_out_vga>;
> +			};
> +		};
> +
> +		port at 1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +
> +			vga_bridge_out: endpoint at 0 {
> +				reg = <0>;
> +				remote-endpoint = <&vga_con_in>;
> +			};
> +		};
> +	};
> +};
> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> index afec232..498fa75 100644
> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> @@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
>  
>  static const struct of_device_id dumb_vga_match[] = {
>  	{ .compatible = "dumb-vga-dac" },
> +	{ .compatible = "ti,ths8135" },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, dumb_vga_match);
> -- 
> 2.9.3
> 

Re: [PATCH v5 2/4] drm: bridge: add support for TI ths8135

[Rob Herring]

On Wed, Dec 07, 2016 at 11:42:43AM +0100, Bartosz Golaszewski wrote:
> THS8135 is a configurable video DAC. Add DT bindings for this chip and
> use the dumb-vga-dac driver for now as no configuration is required to
> make it work.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  .../bindings/display/bridge/ti,ths8135.txt         | 52 ++++++++++++++++++++++
>  drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
>  2 files changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt

Acked-by: Rob Herring <robh@kernel.org>

But one nit below:

> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> new file mode 100644
> index 0000000..23cd8ee
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> @@ -0,0 +1,52 @@
> +THS8135 Video DAC
> +-----------------
> +
> +This is the binding for Texas Instruments THS8135 Video DAC bridge.
> +
> +Required properties:
> +
> +- compatible: Must be "ti,ths8135"
> +
> +Required nodes:
> +
> +This device has two video ports. Their connections are modelled using the OF
> +graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> +
> +- Video port 0 for RGB input
> +- Video port 1 for VGA output
> +
> +Example
> +-------
> +
> +vga-bridge {
> +	compatible = "ti,ths8135";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port@0 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0>;
> +
> +			vga_bridge_in: endpoint@0 {
> +				reg = <0>;

You don't need reg here.

> +				remote-endpoint = <&lcdc_out_vga>;
> +			};
> +		};
> +
> +		port@1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +
> +			vga_bridge_out: endpoint@0 {
> +				reg = <0>;
> +				remote-endpoint = <&vga_con_in>;
> +			};
> +		};
> +	};
> +};
> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> index afec232..498fa75 100644
> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> @@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
>  
>  static const struct of_device_id dumb_vga_match[] = {
>  	{ .compatible = "dumb-vga-dac" },
> +	{ .compatible = "ti,ths8135" },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, dumb_vga_match);
> -- 
> 2.9.3
> 

Re: [PATCH v5 2/4] drm: bridge: add support for TI ths8135

[Rob Herring]

On Wed, Dec 07, 2016 at 11:42:43AM +0100, Bartosz Golaszewski wrote:
> THS8135 is a configurable video DAC. Add DT bindings for this chip and
> use the dumb-vga-dac driver for now as no configuration is required to
> make it work.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> ---
>  .../bindings/display/bridge/ti,ths8135.txt         | 52 ++++++++++++++++++++++
>  drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
>  2 files changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

But one nit below:

> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> new file mode 100644
> index 0000000..23cd8ee
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> @@ -0,0 +1,52 @@
> +THS8135 Video DAC
> +-----------------
> +
> +This is the binding for Texas Instruments THS8135 Video DAC bridge.
> +
> +Required properties:
> +
> +- compatible: Must be "ti,ths8135"
> +
> +Required nodes:
> +
> +This device has two video ports. Their connections are modelled using the OF
> +graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> +
> +- Video port 0 for RGB input
> +- Video port 1 for VGA output
> +
> +Example
> +-------
> +
> +vga-bridge {
> +	compatible = "ti,ths8135";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port@0 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0>;
> +
> +			vga_bridge_in: endpoint@0 {
> +				reg = <0>;

You don't need reg here.

> +				remote-endpoint = <&lcdc_out_vga>;
> +			};
> +		};
> +
> +		port@1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +
> +			vga_bridge_out: endpoint@0 {
> +				reg = <0>;
> +				remote-endpoint = <&vga_con_in>;
> +			};
> +		};
> +	};
> +};
> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> index afec232..498fa75 100644
> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> @@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
>  
>  static const struct of_device_id dumb_vga_match[] = {
>  	{ .compatible = "dumb-vga-dac" },
> +	{ .compatible = "ti,ths8135" },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, dumb_vga_match);
> -- 
> 2.9.3
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 2/4] drm: bridge: add support for TI ths8135

[Laurent Pinchart]

Hello,

On Monday 12 Dec 2016 10:45:47 Rob Herring wrote:
> On Wed, Dec 07, 2016 at 11:42:43AM +0100, Bartosz Golaszewski wrote:
> > THS8135 is a configurable video DAC. Add DT bindings for this chip and
> > use the dumb-vga-dac driver for now as no configuration is required to
> > make it work.
> > 
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > ---
> > 
> >  .../bindings/display/bridge/ti,ths8135.txt         | 52 +++++++++++++++++
> >  drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
> >  2 files changed, 53 insertions(+)
> >  create mode 100644
> >  Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> Acked-by: Rob Herring <robh@kernel.org>
> 
> But one nit below:
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> > b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt new
> > file mode 100644
> > index 0000000..23cd8ee
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> > @@ -0,0 +1,52 @@
> > +THS8135 Video DAC
> > +-----------------
> > +
> > +This is the binding for Texas Instruments THS8135 Video DAC bridge.
> > +
> > +Required properties:
> > +
> > +- compatible: Must be "ti,ths8135"
> > +
> > +Required nodes:
> > +
> > +This device has two video ports. Their connections are modelled using the
> > OF +graph bindings specified in
> > Documentation/devicetree/bindings/graph.txt. +
> > +- Video port 0 for RGB input
> > +- Video port 1 for VGA output
> > +
> > +Example
> > +-------
> > +
> > +vga-bridge {
> > +	compatible = "ti,ths8135";
> > +	#address-cells = <1>;
> > +	#size-cells = <0>;
> > +
> > +	ports {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		port at 0 {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			reg = <0>;
> > +
> > +			vga_bridge_in: endpoint at 0 {
> > +				reg = <0>;
> 
> You don't need reg here.

In which case the endpoint node should be named endpoint, not endpoint at 0. You 
could then also remove the #address-cells and #size-cells properties from the 
port at 0 node. Same for port at 1 below.

> > +				remote-endpoint = <&lcdc_out_vga>;
> > +			};
> > +		};
> > +
> > +		port at 1 {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			reg = <1>;
> > +
> > +			vga_bridge_out: endpoint at 0 {
> > +				reg = <0>;
> > +				remote-endpoint = <&vga_con_in>;
> > +			};
> > +		};
> > +	};
> > +};
> > diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > b/drivers/gpu/drm/bridge/dumb-vga-dac.c index afec232..498fa75 100644
> > --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > @@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device
> > *pdev)
> >  
> >  static const struct of_device_id dumb_vga_match[] = {
> >  	{ .compatible = "dumb-vga-dac" },
> > +	{ .compatible = "ti,ths8135" },
> >  	{},
> >  };
> >  MODULE_DEVICE_TABLE(of, dumb_vga_match);

-- 
Regards,

Laurent Pinchart

Re: [PATCH v5 2/4] drm: bridge: add support for TI ths8135

[Laurent Pinchart]

Hello,

On Monday 12 Dec 2016 10:45:47 Rob Herring wrote:
> On Wed, Dec 07, 2016 at 11:42:43AM +0100, Bartosz Golaszewski wrote:
> > THS8135 is a configurable video DAC. Add DT bindings for this chip and
> > use the dumb-vga-dac driver for now as no configuration is required to
> > make it work.
> > 
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > ---
> > 
> >  .../bindings/display/bridge/ti,ths8135.txt         | 52 +++++++++++++++++
> >  drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
> >  2 files changed, 53 insertions(+)
> >  create mode 100644
> >  Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> Acked-by: Rob Herring <robh@kernel.org>
> 
> But one nit below:
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> > b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt new
> > file mode 100644
> > index 0000000..23cd8ee
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> > @@ -0,0 +1,52 @@
> > +THS8135 Video DAC
> > +-----------------
> > +
> > +This is the binding for Texas Instruments THS8135 Video DAC bridge.
> > +
> > +Required properties:
> > +
> > +- compatible: Must be "ti,ths8135"
> > +
> > +Required nodes:
> > +
> > +This device has two video ports. Their connections are modelled using the
> > OF +graph bindings specified in
> > Documentation/devicetree/bindings/graph.txt. +
> > +- Video port 0 for RGB input
> > +- Video port 1 for VGA output
> > +
> > +Example
> > +-------
> > +
> > +vga-bridge {
> > +	compatible = "ti,ths8135";
> > +	#address-cells = <1>;
> > +	#size-cells = <0>;
> > +
> > +	ports {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		port@0 {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			reg = <0>;
> > +
> > +			vga_bridge_in: endpoint@0 {
> > +				reg = <0>;
> 
> You don't need reg here.

In which case the endpoint node should be named endpoint, not endpoint@0. You 
could then also remove the #address-cells and #size-cells properties from the 
port@0 node. Same for port@1 below.

> > +				remote-endpoint = <&lcdc_out_vga>;
> > +			};
> > +		};
> > +
> > +		port@1 {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			reg = <1>;
> > +
> > +			vga_bridge_out: endpoint@0 {
> > +				reg = <0>;
> > +				remote-endpoint = <&vga_con_in>;
> > +			};
> > +		};
> > +	};
> > +};
> > diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > b/drivers/gpu/drm/bridge/dumb-vga-dac.c index afec232..498fa75 100644
> > --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > @@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device
> > *pdev)
> >  
> >  static const struct of_device_id dumb_vga_match[] = {
> >  	{ .compatible = "dumb-vga-dac" },
> > +	{ .compatible = "ti,ths8135" },
> >  	{},
> >  };
> >  MODULE_DEVICE_TABLE(of, dumb_vga_match);

-- 
Regards,

Laurent Pinchart

Re: [PATCH v5 2/4] drm: bridge: add support for TI ths8135

[Laurent Pinchart]

Hello,

On Monday 12 Dec 2016 10:45:47 Rob Herring wrote:
> On Wed, Dec 07, 2016 at 11:42:43AM +0100, Bartosz Golaszewski wrote:
> > THS8135 is a configurable video DAC. Add DT bindings for this chip and
> > use the dumb-vga-dac driver for now as no configuration is required to
> > make it work.
> > 
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> > ---
> > 
> >  .../bindings/display/bridge/ti,ths8135.txt         | 52 +++++++++++++++++
> >  drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
> >  2 files changed, 53 insertions(+)
> >  create mode 100644
> >  Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> 
> But one nit below:
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> > b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt new
> > file mode 100644
> > index 0000000..23cd8ee
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> > @@ -0,0 +1,52 @@
> > +THS8135 Video DAC
> > +-----------------
> > +
> > +This is the binding for Texas Instruments THS8135 Video DAC bridge.
> > +
> > +Required properties:
> > +
> > +- compatible: Must be "ti,ths8135"
> > +
> > +Required nodes:
> > +
> > +This device has two video ports. Their connections are modelled using the
> > OF +graph bindings specified in
> > Documentation/devicetree/bindings/graph.txt. +
> > +- Video port 0 for RGB input
> > +- Video port 1 for VGA output
> > +
> > +Example
> > +-------
> > +
> > +vga-bridge {
> > +	compatible = "ti,ths8135";
> > +	#address-cells = <1>;
> > +	#size-cells = <0>;
> > +
> > +	ports {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		port@0 {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			reg = <0>;
> > +
> > +			vga_bridge_in: endpoint@0 {
> > +				reg = <0>;
> 
> You don't need reg here.

In which case the endpoint node should be named endpoint, not endpoint@0. You 
could then also remove the #address-cells and #size-cells properties from the 
port@0 node. Same for port@1 below.

> > +				remote-endpoint = <&lcdc_out_vga>;
> > +			};
> > +		};
> > +
> > +		port@1 {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			reg = <1>;
> > +
> > +			vga_bridge_out: endpoint@0 {
> > +				reg = <0>;
> > +				remote-endpoint = <&vga_con_in>;
> > +			};
> > +		};
> > +	};
> > +};
> > diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > b/drivers/gpu/drm/bridge/dumb-vga-dac.c index afec232..498fa75 100644
> > --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> > @@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device
> > *pdev)
> >  
> >  static const struct of_device_id dumb_vga_match[] = {
> >  	{ .compatible = "dumb-vga-dac" },
> > +	{ .compatible = "ti,ths8135" },
> >  	{},
> >  };
> >  MODULE_DEVICE_TABLE(of, dumb_vga_match);

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 3/4] ARM: dts: da850-lcdk: add the vga-bridge node

[Bartosz Golaszewski]

Add the vga-bridge node to the board DT together with corresponding
ports and vga connector. This allows to retrieve the edid info from
the display automatically.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850-lcdk.dts | 67 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index afcb482..39602eb 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -51,6 +51,51 @@
 			system-clock-frequency = <24576000>;
 		};
 	};
+
+	vga-bridge {
+		compatible = "ti,ths8135";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				vga_bridge_in: endpoint at 0 {
+					reg = <0>;
+					remote-endpoint = <&lcdc_out_vga>;
+				};
+			};
+
+			port at 1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				vga_bridge_out: endpoint at 0 {
+					reg = <0>;
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		ddc-i2c-bus = <&i2c0>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
 };
 
 &pmx_core {
@@ -236,3 +281,25 @@
 &memctrl {
 	status = "okay";
 };
+
+&lcdc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		lcdc_out: port at 1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			lcdc_out_vga: endpoint at 0 {
+				reg = <0>;
+				remote-endpoint = <&vga_bridge_in>;
+			};
+		};
+	};
+};
-- 
2.9.3

[PATCH v5 3/4] ARM: dts: da850-lcdk: add the vga-bridge node

[Bartosz Golaszewski]

Add the vga-bridge node to the board DT together with corresponding
ports and vga connector. This allows to retrieve the edid info from
the display automatically.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850-lcdk.dts | 67 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index afcb482..39602eb 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -51,6 +51,51 @@
 			system-clock-frequency = <24576000>;
 		};
 	};
+
+	vga-bridge {
+		compatible = "ti,ths8135";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				vga_bridge_in: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&lcdc_out_vga>;
+				};
+			};
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				vga_bridge_out: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		ddc-i2c-bus = <&i2c0>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
 };
 
 &pmx_core {
@@ -236,3 +281,25 @@
 &memctrl {
 	status = "okay";
 };
+
+&lcdc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		lcdc_out: port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			lcdc_out_vga: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vga_bridge_in>;
+			};
+		};
+	};
+};
-- 
2.9.3

[PATCH v5 3/4] ARM: dts: da850-lcdk: add the vga-bridge node

[Bartosz Golaszewski]

Add the vga-bridge node to the board DT together with corresponding
ports and vga connector. This allows to retrieve the edid info from
the display automatically.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850-lcdk.dts | 67 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index afcb482..39602eb 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -51,6 +51,51 @@
 			system-clock-frequency = <24576000>;
 		};
 	};
+
+	vga-bridge {
+		compatible = "ti,ths8135";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				vga_bridge_in: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&lcdc_out_vga>;
+				};
+			};
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				vga_bridge_out: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		ddc-i2c-bus = <&i2c0>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
 };
 
 &pmx_core {
@@ -236,3 +281,25 @@
 &memctrl {
 	status = "okay";
 };
+
+&lcdc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		lcdc_out: port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			lcdc_out_vga: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vga_bridge_in>;
+			};
+		};
+	};
+};
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v5 3/4] ARM: dts: da850-lcdk: add the vga-bridge node

[Laurent Pinchart]

Hi Bartosz,

Thank you for the patch.

On Wednesday 07 Dec 2016 11:42:44 Bartosz Golaszewski wrote:
> Add the vga-bridge node to the board DT together with corresponding
> ports and vga connector. This allows to retrieve the edid info from
> the display automatically.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  arch/arm/boot/dts/da850-lcdk.dts | 67 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 67 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/da850-lcdk.dts
> b/arch/arm/boot/dts/da850-lcdk.dts index afcb482..39602eb 100644
> --- a/arch/arm/boot/dts/da850-lcdk.dts
> +++ b/arch/arm/boot/dts/da850-lcdk.dts
> @@ -51,6 +51,51 @@
>  			system-clock-frequency = <24576000>;
>  		};
>  	};
> +
> +	vga-bridge {
> +		compatible = "ti,ths8135";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port at 0 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <0>;
> +
> +				vga_bridge_in: endpoint at 0 {
> +					reg = <0>;
> +					remote-endpoint = <&lcdc_out_vga>;
> +				};
> +			};
> +
> +			port at 1 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <1>;
> +
> +				vga_bridge_out: endpoint at 0 {
> +					reg = <0>;
> +					remote-endpoint = <&vga_con_in>;
> +				};
> +			};
> +		};
> +	};
> +
> +	vga {
> +		compatible = "vga-connector";
> +
> +		ddc-i2c-bus = <&i2c0>;
> +
> +		port {
> +			vga_con_in: endpoint {
> +				remote-endpoint = <&vga_bridge_out>;
> +			};
> +		};
> +	};
>  };
> 
>  &pmx_core {
> @@ -236,3 +281,25 @@
>  &memctrl {
>  	status = "okay";
>  };
> +
> +&lcdc {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&lcd_pins>;
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		lcdc_out: port at 1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +
> +			lcdc_out_vga: endpoint at 0 {
> +				reg = <0>;
> +				remote-endpoint = <&vga_bridge_in>;
> +			};
> +		};

Just to make sure you're aware, when there's a single endpoint you can 
simplify the DT by omitting the endpoint number. This would become

		lcdc_out: port at 1 {
			reg = <1>;

			lcdc_out_vga: endpoint {
				remote-endpoint = <&vga_bridge_in>;
			};
		};

It's entirely up to you, both get my

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +	};
> +};

-- 
Regards,

Laurent Pinchart

Re: [PATCH v5 3/4] ARM: dts: da850-lcdk: add the vga-bridge node

[Laurent Pinchart]

Hi Bartosz,

Thank you for the patch.

On Wednesday 07 Dec 2016 11:42:44 Bartosz Golaszewski wrote:
> Add the vga-bridge node to the board DT together with corresponding
> ports and vga connector. This allows to retrieve the edid info from
> the display automatically.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  arch/arm/boot/dts/da850-lcdk.dts | 67 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 67 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/da850-lcdk.dts
> b/arch/arm/boot/dts/da850-lcdk.dts index afcb482..39602eb 100644
> --- a/arch/arm/boot/dts/da850-lcdk.dts
> +++ b/arch/arm/boot/dts/da850-lcdk.dts
> @@ -51,6 +51,51 @@
>  			system-clock-frequency = <24576000>;
>  		};
>  	};
> +
> +	vga-bridge {
> +		compatible = "ti,ths8135";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <0>;
> +
> +				vga_bridge_in: endpoint@0 {
> +					reg = <0>;
> +					remote-endpoint = <&lcdc_out_vga>;
> +				};
> +			};
> +
> +			port@1 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <1>;
> +
> +				vga_bridge_out: endpoint@0 {
> +					reg = <0>;
> +					remote-endpoint = <&vga_con_in>;
> +				};
> +			};
> +		};
> +	};
> +
> +	vga {
> +		compatible = "vga-connector";
> +
> +		ddc-i2c-bus = <&i2c0>;
> +
> +		port {
> +			vga_con_in: endpoint {
> +				remote-endpoint = <&vga_bridge_out>;
> +			};
> +		};
> +	};
>  };
> 
>  &pmx_core {
> @@ -236,3 +281,25 @@
>  &memctrl {
>  	status = "okay";
>  };
> +
> +&lcdc {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&lcd_pins>;
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		lcdc_out: port@1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +
> +			lcdc_out_vga: endpoint@0 {
> +				reg = <0>;
> +				remote-endpoint = <&vga_bridge_in>;
> +			};
> +		};

Just to make sure you're aware, when there's a single endpoint you can 
simplify the DT by omitting the endpoint number. This would become

		lcdc_out: port@1 {
			reg = <1>;

			lcdc_out_vga: endpoint {
				remote-endpoint = <&vga_bridge_in>;
			};
		};

It's entirely up to you, both get my

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +	};
> +};

-- 
Regards,

Laurent Pinchart

Re: [PATCH v5 3/4] ARM: dts: da850-lcdk: add the vga-bridge node

[Laurent Pinchart]

Hi Bartosz,

Thank you for the patch.

On Wednesday 07 Dec 2016 11:42:44 Bartosz Golaszewski wrote:
> Add the vga-bridge node to the board DT together with corresponding
> ports and vga connector. This allows to retrieve the edid info from
> the display automatically.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  arch/arm/boot/dts/da850-lcdk.dts | 67 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 67 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/da850-lcdk.dts
> b/arch/arm/boot/dts/da850-lcdk.dts index afcb482..39602eb 100644
> --- a/arch/arm/boot/dts/da850-lcdk.dts
> +++ b/arch/arm/boot/dts/da850-lcdk.dts
> @@ -51,6 +51,51 @@
>  			system-clock-frequency = <24576000>;
>  		};
>  	};
> +
> +	vga-bridge {
> +		compatible = "ti,ths8135";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <0>;
> +
> +				vga_bridge_in: endpoint@0 {
> +					reg = <0>;
> +					remote-endpoint = <&lcdc_out_vga>;
> +				};
> +			};
> +
> +			port@1 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <1>;
> +
> +				vga_bridge_out: endpoint@0 {
> +					reg = <0>;
> +					remote-endpoint = <&vga_con_in>;
> +				};
> +			};
> +		};
> +	};
> +
> +	vga {
> +		compatible = "vga-connector";
> +
> +		ddc-i2c-bus = <&i2c0>;
> +
> +		port {
> +			vga_con_in: endpoint {
> +				remote-endpoint = <&vga_bridge_out>;
> +			};
> +		};
> +	};
>  };
> 
>  &pmx_core {
> @@ -236,3 +281,25 @@
>  &memctrl {
>  	status = "okay";
>  };
> +
> +&lcdc {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&lcd_pins>;
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		lcdc_out: port@1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +
> +			lcdc_out_vga: endpoint@0 {
> +				reg = <0>;
> +				remote-endpoint = <&vga_bridge_in>;
> +			};
> +		};

Just to make sure you're aware, when there's a single endpoint you can 
simplify the DT by omitting the endpoint number. This would become

		lcdc_out: port@1 {
			reg = <1>;

			lcdc_out_vga: endpoint {
				remote-endpoint = <&vga_bridge_in>;
			};
		};

It's entirely up to you, both get my

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +	};
> +};

-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v5 3/4] ARM: dts: da850-lcdk: add the vga-bridge node

[Bartosz Golaszewski]

2016-12-07 15:25 GMT+01:00 Laurent Pinchart <laurent.pinchart@ideasonboard.com>:
> Hi Bartosz,
>
> Thank you for the patch.
>
> On Wednesday 07 Dec 2016 11:42:44 Bartosz Golaszewski wrote:
>> Add the vga-bridge node to the board DT together with corresponding
>> ports and vga connector. This allows to retrieve the edid info from
>> the display automatically.
>>
>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>> ---
>>  arch/arm/boot/dts/da850-lcdk.dts | 67 ++++++++++++++++++++++++++++++++++++
>>  1 file changed, 67 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/da850-lcdk.dts
>> b/arch/arm/boot/dts/da850-lcdk.dts index afcb482..39602eb 100644
>> --- a/arch/arm/boot/dts/da850-lcdk.dts
>> +++ b/arch/arm/boot/dts/da850-lcdk.dts
>> @@ -51,6 +51,51 @@
>>                       system-clock-frequency = <24576000>;
>>               };
>>       };
>> +
>> +     vga-bridge {
>> +             compatible = "ti,ths8135";
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +
>> +             ports {
>> +                     #address-cells = <1>;
>> +                     #size-cells = <0>;
>> +
>> +                     port at 0 {
>> +                             #address-cells = <1>;
>> +                             #size-cells = <0>;
>> +                             reg = <0>;
>> +
>> +                             vga_bridge_in: endpoint at 0 {
>> +                                     reg = <0>;
>> +                                     remote-endpoint = <&lcdc_out_vga>;
>> +                             };
>> +                     };
>> +
>> +                     port at 1 {
>> +                             #address-cells = <1>;
>> +                             #size-cells = <0>;
>> +                             reg = <1>;
>> +
>> +                             vga_bridge_out: endpoint at 0 {
>> +                                     reg = <0>;
>> +                                     remote-endpoint = <&vga_con_in>;
>> +                             };
>> +                     };
>> +             };
>> +     };
>> +
>> +     vga {
>> +             compatible = "vga-connector";
>> +
>> +             ddc-i2c-bus = <&i2c0>;
>> +
>> +             port {
>> +                     vga_con_in: endpoint {
>> +                             remote-endpoint = <&vga_bridge_out>;
>> +                     };
>> +             };
>> +     };
>>  };
>>
>>  &pmx_core {
>> @@ -236,3 +281,25 @@
>>  &memctrl {
>>       status = "okay";
>>  };
>> +
>> +&lcdc {
>> +     status = "okay";
>> +     pinctrl-names = "default";
>> +     pinctrl-0 = <&lcd_pins>;
>> +
>> +     ports {
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +
>> +             lcdc_out: port at 1 {
>> +                     #address-cells = <1>;
>> +                     #size-cells = <0>;
>> +                     reg = <1>;
>> +
>> +                     lcdc_out_vga: endpoint at 0 {
>> +                             reg = <0>;
>> +                             remote-endpoint = <&vga_bridge_in>;
>> +                     };
>> +             };
>
> Just to make sure you're aware, when there's a single endpoint you can
> simplify the DT by omitting the endpoint number. This would become
>
>                 lcdc_out: port at 1 {
>                         reg = <1>;
>
>                         lcdc_out_vga: endpoint {
>                                 remote-endpoint = <&vga_bridge_in>;
>                         };
>                 };
>
> It's entirely up to you, both get my
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
>> +     };
>> +};
>
> --
> Regards,
>
> Laurent Pinchart
>

Hi Laurent,

thanks for the hint, I'll change it if there's going to be a new
version of the series.

Best regards,
Bartosz Golaszewski

Re: [PATCH v5 3/4] ARM: dts: da850-lcdk: add the vga-bridge node

[Bartosz Golaszewski]

2016-12-07 15:25 GMT+01:00 Laurent Pinchart <laurent.pinchart@ideasonboard.com>:
> Hi Bartosz,
>
> Thank you for the patch.
>
> On Wednesday 07 Dec 2016 11:42:44 Bartosz Golaszewski wrote:
>> Add the vga-bridge node to the board DT together with corresponding
>> ports and vga connector. This allows to retrieve the edid info from
>> the display automatically.
>>
>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>> ---
>>  arch/arm/boot/dts/da850-lcdk.dts | 67 ++++++++++++++++++++++++++++++++++++
>>  1 file changed, 67 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/da850-lcdk.dts
>> b/arch/arm/boot/dts/da850-lcdk.dts index afcb482..39602eb 100644
>> --- a/arch/arm/boot/dts/da850-lcdk.dts
>> +++ b/arch/arm/boot/dts/da850-lcdk.dts
>> @@ -51,6 +51,51 @@
>>                       system-clock-frequency = <24576000>;
>>               };
>>       };
>> +
>> +     vga-bridge {
>> +             compatible = "ti,ths8135";
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +
>> +             ports {
>> +                     #address-cells = <1>;
>> +                     #size-cells = <0>;
>> +
>> +                     port@0 {
>> +                             #address-cells = <1>;
>> +                             #size-cells = <0>;
>> +                             reg = <0>;
>> +
>> +                             vga_bridge_in: endpoint@0 {
>> +                                     reg = <0>;
>> +                                     remote-endpoint = <&lcdc_out_vga>;
>> +                             };
>> +                     };
>> +
>> +                     port@1 {
>> +                             #address-cells = <1>;
>> +                             #size-cells = <0>;
>> +                             reg = <1>;
>> +
>> +                             vga_bridge_out: endpoint@0 {
>> +                                     reg = <0>;
>> +                                     remote-endpoint = <&vga_con_in>;
>> +                             };
>> +                     };
>> +             };
>> +     };
>> +
>> +     vga {
>> +             compatible = "vga-connector";
>> +
>> +             ddc-i2c-bus = <&i2c0>;
>> +
>> +             port {
>> +                     vga_con_in: endpoint {
>> +                             remote-endpoint = <&vga_bridge_out>;
>> +                     };
>> +             };
>> +     };
>>  };
>>
>>  &pmx_core {
>> @@ -236,3 +281,25 @@
>>  &memctrl {
>>       status = "okay";
>>  };
>> +
>> +&lcdc {
>> +     status = "okay";
>> +     pinctrl-names = "default";
>> +     pinctrl-0 = <&lcd_pins>;
>> +
>> +     ports {
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +
>> +             lcdc_out: port@1 {
>> +                     #address-cells = <1>;
>> +                     #size-cells = <0>;
>> +                     reg = <1>;
>> +
>> +                     lcdc_out_vga: endpoint@0 {
>> +                             reg = <0>;
>> +                             remote-endpoint = <&vga_bridge_in>;
>> +                     };
>> +             };
>
> Just to make sure you're aware, when there's a single endpoint you can
> simplify the DT by omitting the endpoint number. This would become
>
>                 lcdc_out: port@1 {
>                         reg = <1>;
>
>                         lcdc_out_vga: endpoint {
>                                 remote-endpoint = <&vga_bridge_in>;
>                         };
>                 };
>
> It's entirely up to you, both get my
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
>> +     };
>> +};
>
> --
> Regards,
>
> Laurent Pinchart
>

Hi Laurent,

thanks for the hint, I'll change it if there's going to be a new
version of the series.

Best regards,
Bartosz Golaszewski

[PATCH v5 4/4] ARM: dts: da850: specify the maximum pixel clock rate for tilcdc

[Bartosz Golaszewski]

At maximum CPU frequency of 300 MHz the maximum pixel clock frequency
is 37.5 MHz[1]. We must filter out any mode for which the calculated
pixel clock rate would exceed this value.

Specify the max-pixelclock property for the display node for
da850-lcdk.

[1] http://processors.wiki.ti.com/index.php/OMAP-L1x/C674x/AM1x_LCD_Controller_(LCDC)_Throughput_and_Optimization_Techniques

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 3f51e59..ba5bf80 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -452,6 +452,7 @@
 			compatible = "ti,da850-tilcdc";
 			reg = <0x213000 0x1000>;
 			interrupts = <52>;
+			max-pixelclock = <37500>;
 			status = "disabled";
 		};
 	};
-- 
2.9.3

[PATCH v5 4/4] ARM: dts: da850: specify the maximum pixel clock rate for tilcdc

[Bartosz Golaszewski]

At maximum CPU frequency of 300 MHz the maximum pixel clock frequency
is 37.5 MHz[1]. We must filter out any mode for which the calculated
pixel clock rate would exceed this value.

Specify the max-pixelclock property for the display node for
da850-lcdk.

[1] http://processors.wiki.ti.com/index.php/OMAP-L1x/C674x/AM1x_LCD_Controller_(LCDC)_Throughput_and_Optimization_Techniques

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 3f51e59..ba5bf80 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -452,6 +452,7 @@
 			compatible = "ti,da850-tilcdc";
 			reg = <0x213000 0x1000>;
 			interrupts = <52>;
+			max-pixelclock = <37500>;
 			status = "disabled";
 		};
 	};
-- 
2.9.3

[PATCH v5 4/4] ARM: dts: da850: specify the maximum pixel clock rate for tilcdc

[Bartosz Golaszewski]

At maximum CPU frequency of 300 MHz the maximum pixel clock frequency
is 37.5 MHz[1]. We must filter out any mode for which the calculated
pixel clock rate would exceed this value.

Specify the max-pixelclock property for the display node for
da850-lcdk.

[1] http://processors.wiki.ti.com/index.php/OMAP-L1x/C674x/AM1x_LCD_Controller_(LCDC)_Throughput_and_Optimization_Techniques

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 3f51e59..ba5bf80 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -452,6 +452,7 @@
 			compatible = "ti,da850-tilcdc";
 			reg = <0x213000 0x1000>;
 			interrupts = <52>;
+			max-pixelclock = <37500>;
 			status = "disabled";
 		};
 	};
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel