All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: John Stultz <john.stultz@linaro.org>
Cc: lkml <linux-kernel@vger.kernel.org>,
	dri-devel@lists.freedesktop.org,
	Wolfram Sang <wsa+renesas@sang-engineering.com>
Subject: Re: [PATCH 4/5 v3] drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally
Date: Mon, 16 Jan 2017 17:50:20 +0200	[thread overview]
Message-ID: <3051780.qdkxg3Jpn9@avalon> (raw)
In-Reply-To: <1483472502-16403-5-git-send-email-john.stultz@linaro.org>

Hi John,

Thank you for the patch.

On Tuesday 03 Jan 2017 11:41:41 John Stultz wrote:
> In chasing down issues with EDID probing, I found some
> duplicated but incomplete logic used to power the chip on and
> off.
> 
> This patch refactors the adv7511_power_on/off functions, so
> they can be used for internal needs.
> 
> Cc: David Airlie <airlied@linux.ie>
> Cc: Archit Taneja <architt@codeaurora.org>
> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Cc: Lars-Peter Clausen <lars@metafoo.de>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> Cc: dri-devel@lists.freedesktop.org
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> ---
>  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 14 ++++++++++----
>  1 file changed, 10 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 4b90975..dbdb71c
> 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -325,7 +325,7 @@ static void adv7511_set_link_config(struct adv7511
> *adv7511, adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
>  }
> 
> -static void adv7511_power_on(struct adv7511 *adv7511)
> +static void __adv7511_power_on(struct adv7511 *adv7511)
>  {
>  	adv7511->current_edid_segment = -1;
> 
> @@ -359,24 +359,30 @@ static void adv7511_power_on(struct adv7511 *adv7511)
>  	 * Most of the registers are reset during power down or when HPD is 
low.
>  	 */
>  	regcache_sync(adv7511->regmap);
> +}
> 
> +static void adv7511_power_on(struct adv7511 *adv7511)
> +{
> +	__adv7511_power_on(adv7511);
>  	if (adv7511->type == ADV7533)
>  		adv7533_dsi_power_on(adv7511);
> -
>  	adv7511->powered = true;
>  }
> 
> -static void adv7511_power_off(struct adv7511 *adv7511)
> +static void __adv7511_power_off(struct adv7511 *adv7511)
>  {
>  	/* TODO: setup additional power down modes */
>  	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
>  			   ADV7511_POWER_POWER_DOWN,
>  			   ADV7511_POWER_POWER_DOWN);
>  	regcache_mark_dirty(adv7511->regmap);
> +}
> 
> +static void adv7511_power_off(struct adv7511 *adv7511)
> +{
> +	__adv7511_power_off(adv7511);
>  	if (adv7511->type == ADV7533)
>  		adv7533_dsi_power_off(adv7511);
> -
>  	adv7511->powered = false;
>  }

-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: John Stultz <john.stultz@linaro.org>
Cc: lkml <linux-kernel@vger.kernel.org>,
	David Airlie <airlied@linux.ie>,
	Archit Taneja <architt@codeaurora.org>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Lars-Peter Clausen <lars@metafoo.de>,
	dri-devel@lists.freedesktop.org
Subject: Re: [PATCH 4/5 v3] drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally
Date: Mon, 16 Jan 2017 17:50:20 +0200	[thread overview]
Message-ID: <3051780.qdkxg3Jpn9@avalon> (raw)
In-Reply-To: <1483472502-16403-5-git-send-email-john.stultz@linaro.org>

Hi John,

Thank you for the patch.

On Tuesday 03 Jan 2017 11:41:41 John Stultz wrote:
> In chasing down issues with EDID probing, I found some
> duplicated but incomplete logic used to power the chip on and
> off.
> 
> This patch refactors the adv7511_power_on/off functions, so
> they can be used for internal needs.
> 
> Cc: David Airlie <airlied@linux.ie>
> Cc: Archit Taneja <architt@codeaurora.org>
> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Cc: Lars-Peter Clausen <lars@metafoo.de>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> Cc: dri-devel@lists.freedesktop.org
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> ---
>  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 14 ++++++++++----
>  1 file changed, 10 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 4b90975..dbdb71c
> 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -325,7 +325,7 @@ static void adv7511_set_link_config(struct adv7511
> *adv7511, adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
>  }
> 
> -static void adv7511_power_on(struct adv7511 *adv7511)
> +static void __adv7511_power_on(struct adv7511 *adv7511)
>  {
>  	adv7511->current_edid_segment = -1;
> 
> @@ -359,24 +359,30 @@ static void adv7511_power_on(struct adv7511 *adv7511)
>  	 * Most of the registers are reset during power down or when HPD is 
low.
>  	 */
>  	regcache_sync(adv7511->regmap);
> +}
> 
> +static void adv7511_power_on(struct adv7511 *adv7511)
> +{
> +	__adv7511_power_on(adv7511);
>  	if (adv7511->type == ADV7533)
>  		adv7533_dsi_power_on(adv7511);
> -
>  	adv7511->powered = true;
>  }
> 
> -static void adv7511_power_off(struct adv7511 *adv7511)
> +static void __adv7511_power_off(struct adv7511 *adv7511)
>  {
>  	/* TODO: setup additional power down modes */
>  	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
>  			   ADV7511_POWER_POWER_DOWN,
>  			   ADV7511_POWER_POWER_DOWN);
>  	regcache_mark_dirty(adv7511->regmap);
> +}
> 
> +static void adv7511_power_off(struct adv7511 *adv7511)
> +{
> +	__adv7511_power_off(adv7511);
>  	if (adv7511->type == ADV7533)
>  		adv7533_dsi_power_off(adv7511);
> -
>  	adv7511->powered = false;
>  }

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2017-01-16 15:50 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-03 19:41 [PATCH 0/5 v3] adv7511 EDID probing improvements John Stultz
2017-01-03 19:41 ` [PATCH 1/5 v3] drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context John Stultz
2017-01-03 19:41   ` John Stultz
2017-01-03 19:41 ` [PATCH 2/5 v3] drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event() John Stultz
2017-01-03 19:41   ` John Stultz
2017-01-16 15:47   ` Laurent Pinchart
2017-01-16 15:56     ` Laurent Pinchart
2017-01-16 19:31       ` John Stultz
2017-01-03 19:41 ` [PATCH 3/5 v3] drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection John Stultz
2017-01-03 19:41 ` [PATCH 4/5 v3] drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally John Stultz
2017-01-03 19:41   ` John Stultz
2017-01-16 15:50   ` Laurent Pinchart [this message]
2017-01-16 15:50     ` Laurent Pinchart
2017-01-03 19:41 ` [PATCH 5/5 v3] drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID John Stultz
2017-01-16 16:03   ` Laurent Pinchart
2017-01-16 16:03     ` Laurent Pinchart
2017-01-16 20:14     ` John Stultz
2017-01-16 20:14       ` John Stultz
2017-01-16 22:25       ` Laurent Pinchart
2017-01-16 22:25         ` Laurent Pinchart
2017-01-16 23:16         ` [RFC][PATCH] drm/bridge: adv7511: Re-write the i2c address as it may have been lost John Stultz
2017-01-16 23:16           ` John Stultz
2017-01-16 23:36           ` Laurent Pinchart
2017-01-16 23:39             ` John Stultz
2017-01-11  8:48 ` [PATCH 0/5 v3] adv7511 EDID probing improvements Archit Taneja
2017-01-12  0:06   ` John Stultz
2017-01-12  0:06     ` John Stultz
2017-01-12  4:22     ` Archit Taneja
2017-01-16 15:57 ` Laurent Pinchart
2017-01-16 15:57   ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3051780.qdkxg3Jpn9@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=john.stultz@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.