[PATCH v2] ARM: dts: Add support for Liebherr's BK4 device (vf610 based)

[stefan@agner.ch (Stefan Agner)]

On 28.09.2018 00:18, Lukasz Majewski wrote:
> This commit adds DTS support for BK4 device from Liebherr. It
> uses vf610 SoC from NXP.
> 
> Signed-off-by: Lukasz Majewski <lukma@denx.de>

Reviewed-by: Stefan Agner <stefan@agner.ch>

--
Stefan

> ---
> Changes for v2:
> 
> - Rename enet_ext and audio_ext oscillator names
> - Move regulators from simple-bus (and rename to reg_3p3v: regulator-3p3v)
> - Add stdout-path property to chosen node
> - Move iomuxc node to the end (as it is so large)
> - Sort with alphabetical order
> - Rename the default pinctrl to "hog"
> - Move LED pins definition from "hog" to "led" group
> - Add more descriptive names to default pins pinmux definition
> - Use spi-slave property to describe node working in this mode
> - Rename the spidev3 node to slave
> - Introduce new compatible name (lwn,bk4) for spidev driver (to avoid
>   confusion)
> - Update some compatibles to match current kernel
> ---
>  arch/arm/boot/dts/Makefile      |   1 +
>  arch/arm/boot/dts/vf610-bk4.dts | 499 ++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 500 insertions(+)
>  create mode 100644 arch/arm/boot/dts/vf610-bk4.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index b5bd3de87c33..e6f159895fa9 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -577,6 +577,7 @@ dtb-$(CONFIG_SOC_LS1021A) += \
>  	ls1021a-twr.dtb
>  dtb-$(CONFIG_SOC_VF610) += \
>  	vf500-colibri-eval-v3.dtb \
> +	vf610-bk4.dtb \
>  	vf610-colibri-eval-v3.dtb \
>  	vf610m4-colibri.dtb \
>  	vf610-cosmic.dtb \
> diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts
> new file mode 100644
> index 000000000000..78c5723d6f64
> --- /dev/null
> +++ b/arch/arm/boot/dts/vf610-bk4.dts
> @@ -0,0 +1,499 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2018
> + * Lukasz Majewski, DENX Software Engineering, lukma at denx.de
> + */
> +
> +/dts-v1/;
> +#include "vf610.dtsi"
> +
> +/ {
> +	model = "Liebherr BK4 controller";
> +	compatible = "lwn,bk4", "fsl,vf610";
> +
> +	chosen {
> +		stdout-path = &uart1;
> +	};
> +
> +	memory at 80000000 {
> +		reg = <0x80000000 0x8000000>;
> +	};
> +
> +	audio_ext: oscillator-audio {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <24576000>;
> +	};
> +
> +	enet_ext: oscillator-ethernet {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <50000000>;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_leds>;
> +
> +		/* LED D5 */
> +		led0: heartbeat {
> +			label = "heartbeat";
> +			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
> +			default-state = "on";
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	reg_3p3v: regulator-3p3v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "3P3V";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +	};
> +
> +	reg_vcc_3v3_mcu: regulator-vcc_3v3_mcu {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_3v3_mcu";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +};
> +
> +&adc0 {
> +	vref-supply = <&reg_vcc_3v3_mcu>;
> +	status = "okay";
> +};
> +
> +&adc1 {
> +	vref-supply = <&reg_vcc_3v3_mcu>;
> +	status = "okay";
> +};
> +
> +&can0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_can0>;
> +	status = "okay";
> +};
> +
> +&can1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_can1>;
> +	status = "okay";
> +};
> +
> +&clks {
> +	clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
> +	clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
> +};
> +
> +&dspi0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_dspi0>;
> +	bus-num = <0>;
> +	status = "okay";
> +
> +	spidev0 at 0 {
> +		compatible = "lwn,bk4";
> +		spi-max-frequency = <30000000>;
> +		reg = <0>;
> +		fsl,spi-cs-sck-delay = <200>;
> +		fsl,spi-sck-cs-delay = <400>;
> +	};
> +};
> +
> +&dspi3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_dspi3>;
> +	bus-num = <3>;
> +	status = "okay";
> +	spi-slave;
> +
> +	slave at 0 {
> +		compatible = "lwn,bk4";
> +		spi-max-frequency = <30000000>;
> +		reg = <0>;
> +	};
> +};
> +
> +&edma0 {
> +	status = "okay";
> +};
> +
> +&edma1 {
> +	status = "okay";
> +};
> +
> +&esdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_esdhc1>;
> +	bus-width = <4>;
> +	cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> +	status = "okay";
> +};
> +
> +&fec0 {
> +	phy-mode = "rmii";
> +	phy-handle = <&ethphy0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_fec0>;
> +	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		ethphy0: ethernet-phy at 1 {
> +			reg = <1>;
> +			clocks = <&clks VF610_CLK_ENET_50M>;
> +			clock-names = "rmii-ref";
> +		};
> +	};
> +};
> +
> +&fec1 {
> +	phy-mode = "rmii";
> +	phy-handle = <&ethphy1>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_fec1>;
> +	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		ethphy1: ethernet-phy at 1 {
> +			reg = <1>;
> +			clocks = <&clks VF610_CLK_ENET_50M>;
> +			clock-names = "rmii-ref";
> +		};
> +	};
> +};
> +
> +&i2c2 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	eeprom: eeprom at 50 {
> +		compatible = "atmel,24c256";
> +		reg = <0x50>;
> +	};
> +
> +	rtc: rtc at 68 {
> +		compatible = "st,m41t62";
> +		reg = <0x68>;
> +	};
> +};
> +
> +&nfc {
> +	assigned-clocks = <&clks VF610_CLK_NFC>;
> +	assigned-clock-rates = <33000000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_nfc>;
> +	status = "okay";
> +
> +	nand at 0 {
> +		compatible = "fsl,vf610-nfc-nandcs";
> +		reg = <0>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		nand-bus-width = <16>;
> +		nand-ecc-mode = "hw";
> +		nand-ecc-strength = <24>;
> +		nand-ecc-step-size = <2048>;
> +		nand-on-flash-bbt;
> +	};
> +};
> +
> +&qspi0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_qspi0>;
> +	status = "okay";
> +
> +	flash0: n25q128a13 at 0 {
> +		compatible = "n25q128a13", "jedec,spi-nor";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		spi-max-frequency = <66000000>;
> +		spi-rx-bus-width = <4>;
> +		reg = <0>;
> +	};
> +
> +	flash1: n25q128a13 at 1 {
> +		compatible = "n25q128a13", "jedec,spi-nor";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		spi-max-frequency = <66000000>;
> +		spi-rx-bus-width = <2>;
> +		reg = <1>;
> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart0>;
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	status = "okay";
> +};
> +
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart3>;
> +	status = "okay";
> +};
> +
> +&usbdev0 {
> +	disable-over-current;
> +	status = "okay";
> +};
> +
> +&usbh1 {
> +	disable-over-current;
> +	status = "okay";
> +};
> +
> +&usbmisc0 {
> +	status = "okay";
> +};
> +
> +&usbmisc1 {
> +	status = "okay";
> +};
> +
> +&usbphy0 {
> +	status = "okay";
> +};
> +
> +&usbphy1 {
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hog>;
> +
> +	pinctrl_hog: hoggrp {
> +		fsl,pins = <
> +			/* One_Wire_PSU_EN */
> +			VF610_PAD_PTC29__GPIO_102		0x1183
> +			/* SPI ENABLE */
> +			VF610_PAD_PTB26__GPIO_96		0x1183
> +			/* EB control */
> +			VF610_PAD_PTE14__GPIO_119		0x1183
> +			VF610_PAD_PTE4__GPIO_109		0x1181
> +			/* Feedback_Lines */
> +			VF610_PAD_PTC31__GPIO_104		0x1181
> +			VF610_PAD_PTA7__GPIO_134		0x1181
> +			VF610_PAD_PTD9__GPIO_88		0x1181
> +			VF610_PAD_PTE1__GPIO_106		0x1183
> +			VF610_PAD_PTB2__GPIO_24		0x1181
> +			VF610_PAD_PTB3__GPIO_25		0x1181
> +			VF610_PAD_PTB1__GPIO_23		0x1181
> +			/* SDHC Enable */
> +			VF610_PAD_PTE19__GPIO_124		0x1183
> +			/* SDHC Overcurrent */
> +			VF610_PAD_PTB23__GPIO_93		0x1181
> +			/* GPI */
> +			VF610_PAD_PTE2__GPIO_107		0x1181
> +			VF610_PAD_PTE3__GPIO_108		0x1181
> +			VF610_PAD_PTE5__GPIO_110		0x1181
> +			VF610_PAD_PTE6__GPIO_111		0x1181
> +			/* GPO */
> +			VF610_PAD_PTE0__GPIO_105		0x1183
> +			VF610_PAD_PTE7__GPIO_112		0x1183
> +			/* RS485 Control */
> +			VF610_PAD_PTB8__GPIO_30		0x1183
> +			VF610_PAD_PTB9__GPIO_31		0x1183
> +			VF610_PAD_PTE8__GPIO_113		0x1183
> +			/* MPBUS MPB_EN */
> +			VF610_PAD_PTE28__GPIO_133		0x1183
> +			/* MISC */
> +			VF610_PAD_PTE10__GPIO_115		0x1183
> +			VF610_PAD_PTE11__GPIO_116		0x1183
> +			VF610_PAD_PTE17__GPIO_122		0x1183
> +			VF610_PAD_PTC30__GPIO_103		0x1183
> +			VF610_PAD_PTB0__GPIO_22		0x1181
> +			/* RESETINFO */
> +			VF610_PAD_PTE26__GPIO_131		0x1183
> +			VF610_PAD_PTD6__GPIO_85		0x1181
> +			VF610_PAD_PTE27__GPIO_132		0x1181
> +			VF610_PAD_PTE13__GPIO_118		0x1181
> +			VF610_PAD_PTE21__GPIO_126		0x1181
> +			VF610_PAD_PTE22__GPIO_127		0x1181
> +			/* EE_5V_EN */
> +			VF610_PAD_PTE18__GPIO_123		0x1183
> +			/* EE_5V_OC_N */
> +			VF610_PAD_PTE25__GPIO_130		0x1181
> +		>;
> +	};
> +
> +	pinctrl_can0: can0grp {
> +		fsl,pins = <
> +			VF610_PAD_PTB14__CAN0_RX		0x1181
> +			VF610_PAD_PTB15__CAN0_TX		0x1182
> +		>;
> +	};
> +
> +	pinctrl_can1: can1grp {
> +		fsl,pins = <
> +			VF610_PAD_PTB16__CAN1_RX		0x1181
> +			VF610_PAD_PTB17__CAN1_TX		0x1182
> +		>;
> +	};
> +
> +	pinctrl_dspi0: dspi0grp {
> +		fsl,pins = <
> +			VF610_PAD_PTB18__DSPI0_CS1		0x1182
> +			VF610_PAD_PTB19__DSPI0_CS0		0x1182
> +			VF610_PAD_PTB20__DSPI0_SIN		0x1181
> +			VF610_PAD_PTB21__DSPI0_SOUT		0x1182
> +			VF610_PAD_PTB22__DSPI0_SCK		0x1182
> +		>;
> +	};
> +
> +	pinctrl_dspi3: dspi3grp {
> +		fsl,pins = <
> +			VF610_PAD_PTD10__DSPI3_CS0		0x1181
> +			VF610_PAD_PTD11__DSPI3_SIN		0x1181
> +			VF610_PAD_PTD12__DSPI3_SOUT		0x1182
> +			VF610_PAD_PTD13__DSPI3_SCK		0x1181
> +		>;
> +	};
> +
> +	pinctrl_esdhc1: esdhc1grp {
> +		fsl,pins = <
> +			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
> +			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
> +			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
> +			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
> +			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
> +			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
> +			VF610_PAD_PTB28__GPIO_98		0x219d
> +		>;
> +	};
> +
> +	pinctrl_fec0: fec0grp {
> +		fsl,pins = <
> +			VF610_PAD_PTA6__RMII_CLKIN		0x30dd
> +			VF610_PAD_PTC0__ENET_RMII0_MDC		0x30de
> +			VF610_PAD_PTC1__ENET_RMII0_MDIO	0x30df
> +			VF610_PAD_PTC2__ENET_RMII0_CRS		0x30dd
> +			VF610_PAD_PTC3__ENET_RMII0_RXD1	0x30dd
> +			VF610_PAD_PTC4__ENET_RMII0_RXD0	0x30dd
> +			VF610_PAD_PTC5__ENET_RMII0_RXER	0x30dd
> +			VF610_PAD_PTC6__ENET_RMII0_TXD1	0x30de
> +			VF610_PAD_PTC7__ENET_RMII0_TXD0	0x30de
> +			VF610_PAD_PTC8__ENET_RMII0_TXEN	0x30de
> +		>;
> +	};
> +
> +	pinctrl_fec1: fec1grp {
> +		fsl,pins = <
> +			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30de
> +			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30df
> +			VF610_PAD_PTC11__ENET_RMII1_CRS	0x30dd
> +			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30dd
> +			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30dd
> +			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30dd
> +			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30de
> +			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30de
> +			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30de
> +		>;
> +	};
> +
> +	pinctrl_gpio_leds: gpio_leds {
> +		fsl,pins = <
> +			/* Heart bit LED */
> +			VF610_PAD_PTE12__GPIO_117	0x1183
> +			/* LEDS */
> +			VF610_PAD_PTE15__GPIO_120	0x1183
> +			VF610_PAD_PTA12__GPIO_5	0x1183
> +			VF610_PAD_PTA16__GPIO_6	0x1183
> +			VF610_PAD_PTE9__GPIO_114	0x1183
> +			VF610_PAD_PTE20__GPIO_125	0x1183
> +			VF610_PAD_PTE23__GPIO_128	0x1183
> +			VF610_PAD_PTE16__GPIO_121	0x1183
> +		>;
> +	};
> +
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			VF610_PAD_PTA22__I2C2_SCL               0x34df
> +			VF610_PAD_PTA23__I2C2_SDA               0x34df
> +		>;
> +	};
> +
> +	pinctrl_nfc: nfcgrp {
> +		fsl,pins = <
> +			VF610_PAD_PTD23__NF_IO7		0x28df
> +			VF610_PAD_PTD22__NF_IO6		0x28df
> +			VF610_PAD_PTD21__NF_IO5		0x28df
> +			VF610_PAD_PTD20__NF_IO4		0x28df
> +			VF610_PAD_PTD19__NF_IO3		0x28df
> +			VF610_PAD_PTD18__NF_IO2		0x28df
> +			VF610_PAD_PTD17__NF_IO1		0x28df
> +			VF610_PAD_PTD16__NF_IO0		0x28df
> +			VF610_PAD_PTB24__NF_WE_B		0x28c2
> +			VF610_PAD_PTB25__NF_CE0_B		0x28c2
> +			VF610_PAD_PTB27__NF_RE_B		0x28c2
> +			VF610_PAD_PTC26__NF_RB_B		0x283d
> +			VF610_PAD_PTC27__NF_ALE		0x28c2
> +			VF610_PAD_PTC28__NF_CLE		0x28c2
> +		>;
> +	};
> +
> +	pinctrl_uart0: uart0grp {
> +		fsl,pins = <
> +			VF610_PAD_PTB10__UART0_TX		0x21a2
> +			VF610_PAD_PTB11__UART0_RX		0x21a1
> +		>;
> +	};
> +
> +	pinctrl_uart1: uart1grp {
> +		fsl,pins = <
> +			VF610_PAD_PTB4__UART1_TX		0x21a2
> +			VF610_PAD_PTB5__UART1_RX		0x21a1
> +		>;
> +	};
> +
> +	pinctrl_uart2: uart2grp {
> +		fsl,pins = <
> +			VF610_PAD_PTB6__UART2_TX		0x21a2
> +			VF610_PAD_PTB7__UART2_RX		0x21a1
> +		>;
> +	};
> +
> +	pinctrl_uart3: uart3grp {
> +		fsl,pins = <
> +			VF610_PAD_PTA20__UART3_TX		0x21a2
> +			VF610_PAD_PTA21__UART3_RX		0x21a1
> +		>;
> +	};
> +
> +	pinctrl_qspi0: qspi0grp {
> +		fsl,pins = <
> +			VF610_PAD_PTD0__QSPI0_A_QSCK	0x397f
> +			VF610_PAD_PTD1__QSPI0_A_CS0	0x397f
> +			VF610_PAD_PTD2__QSPI0_A_DATA3	0x397f
> +			VF610_PAD_PTD3__QSPI0_A_DATA2	0x397f
> +			VF610_PAD_PTD4__QSPI0_A_DATA1	0x397f
> +			VF610_PAD_PTD5__QSPI0_A_DATA0	0x397f
> +			VF610_PAD_PTD7__QSPI0_B_QSCK	0x397f
> +			VF610_PAD_PTD8__QSPI0_B_CS0	0x397f
> +			VF610_PAD_PTD11__QSPI0_B_DATA1	0x397f
> +			VF610_PAD_PTD12__QSPI0_B_DATA0	0x397f
> +		>;
> +	};
> +};