[PATCH V2 00/10] rockchip: Add Powkiddy X55

[PATCH V2 00/10] rockchip: Add Powkiddy X55

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
console.

Changes since V1:
 - Corrected a bug with the DRM mode flags for the video driver.
 - Adjusted panel front and back porch and pixel clock to fix
   issues with display that occurred after correcting DRM mode
   flag bug.
 - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.

Chris Morgan (10):
  drm/panel: himax-hx8394: Drop prepare/unprepare tracking
  drm/panel: himax-hx8394: Drop shutdown logic
  dt-bindings: display: Document Himax HX8394 panel rotation
  drm/panel: himax-hx8394: Add Panel Rotation Support
  dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel
  drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
  clk: rockchip: Mark pclk_usb as critical on rk3568
  clk: rockchip: rk3568: Add PLL rate for 126.4MHz
  dt-bindings: arm: rockchip: Add Powkiddy X55
  arm64: dts: rockchip: Add Powkiddy X55

 .../devicetree/bindings/arm/rockchip.yaml     |   1 +
 .../bindings/display/panel/himax,hx8394.yaml  |   3 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3566-powkiddy-x55.dts | 926 ++++++++++++++++++
 drivers/clk/rockchip/clk-rk3568.c             |   2 +
 drivers/gpu/drm/panel/panel-himax-hx8394.c    | 180 +++-
 6 files changed, 1085 insertions(+), 28 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts

-- 
2.34.1

[PATCH V2 00/10] rockchip: Add Powkiddy X55

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
console.

Changes since V1:
 - Corrected a bug with the DRM mode flags for the video driver.
 - Adjusted panel front and back porch and pixel clock to fix
   issues with display that occurred after correcting DRM mode
   flag bug.
 - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.

Chris Morgan (10):
  drm/panel: himax-hx8394: Drop prepare/unprepare tracking
  drm/panel: himax-hx8394: Drop shutdown logic
  dt-bindings: display: Document Himax HX8394 panel rotation
  drm/panel: himax-hx8394: Add Panel Rotation Support
  dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel
  drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
  clk: rockchip: Mark pclk_usb as critical on rk3568
  clk: rockchip: rk3568: Add PLL rate for 126.4MHz
  dt-bindings: arm: rockchip: Add Powkiddy X55
  arm64: dts: rockchip: Add Powkiddy X55

 .../devicetree/bindings/arm/rockchip.yaml     |   1 +
 .../bindings/display/panel/himax,hx8394.yaml  |   3 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3566-powkiddy-x55.dts | 926 ++++++++++++++++++
 drivers/clk/rockchip/clk-rk3568.c             |   2 +
 drivers/gpu/drm/panel/panel-himax-hx8394.c    | 180 +++-
 6 files changed, 1085 insertions(+), 28 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts

-- 
2.34.1

[PATCH V2 00/10] rockchip: Add Powkiddy X55

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
console.

Changes since V1:
 - Corrected a bug with the DRM mode flags for the video driver.
 - Adjusted panel front and back porch and pixel clock to fix
   issues with display that occurred after correcting DRM mode
   flag bug.
 - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.

Chris Morgan (10):
  drm/panel: himax-hx8394: Drop prepare/unprepare tracking
  drm/panel: himax-hx8394: Drop shutdown logic
  dt-bindings: display: Document Himax HX8394 panel rotation
  drm/panel: himax-hx8394: Add Panel Rotation Support
  dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel
  drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
  clk: rockchip: Mark pclk_usb as critical on rk3568
  clk: rockchip: rk3568: Add PLL rate for 126.4MHz
  dt-bindings: arm: rockchip: Add Powkiddy X55
  arm64: dts: rockchip: Add Powkiddy X55

 .../devicetree/bindings/arm/rockchip.yaml     |   1 +
 .../bindings/display/panel/himax,hx8394.yaml  |   3 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3566-powkiddy-x55.dts | 926 ++++++++++++++++++
 drivers/clk/rockchip/clk-rk3568.c             |   2 +
 drivers/gpu/drm/panel/panel-himax-hx8394.c    | 180 +++-
 6 files changed, 1085 insertions(+), 28 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts

-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH V2 01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Drop the panel specific prepare/unprepare logic. This is now tracked
by the DRM stack [1].

[1] commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled in
drm_panel")

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/gpu/drm/panel/panel-himax-hx8394.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
index c73243d85de7..3823ff388b96 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
@@ -68,7 +68,6 @@ struct hx8394 {
 	struct gpio_desc *reset_gpio;
 	struct regulator *vcc;
 	struct regulator *iovcc;
-	bool prepared;
 
 	const struct hx8394_panel_desc *desc;
 };
@@ -262,16 +261,11 @@ static int hx8394_unprepare(struct drm_panel *panel)
 {
 	struct hx8394 *ctx = panel_to_hx8394(panel);
 
-	if (!ctx->prepared)
-		return 0;
-
 	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
 
 	regulator_disable(ctx->iovcc);
 	regulator_disable(ctx->vcc);
 
-	ctx->prepared = false;
-
 	return 0;
 }
 
@@ -280,9 +274,6 @@ static int hx8394_prepare(struct drm_panel *panel)
 	struct hx8394 *ctx = panel_to_hx8394(panel);
 	int ret;
 
-	if (ctx->prepared)
-		return 0;
-
 	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
 
 	ret = regulator_enable(ctx->vcc);
@@ -301,8 +292,6 @@ static int hx8394_prepare(struct drm_panel *panel)
 
 	msleep(180);
 
-	ctx->prepared = true;
-
 	return 0;
 
 disable_vcc:
-- 
2.34.1

[PATCH V2 01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Drop the panel specific prepare/unprepare logic. This is now tracked
by the DRM stack [1].

[1] commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled in
drm_panel")

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/gpu/drm/panel/panel-himax-hx8394.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
index c73243d85de7..3823ff388b96 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
@@ -68,7 +68,6 @@ struct hx8394 {
 	struct gpio_desc *reset_gpio;
 	struct regulator *vcc;
 	struct regulator *iovcc;
-	bool prepared;
 
 	const struct hx8394_panel_desc *desc;
 };
@@ -262,16 +261,11 @@ static int hx8394_unprepare(struct drm_panel *panel)
 {
 	struct hx8394 *ctx = panel_to_hx8394(panel);
 
-	if (!ctx->prepared)
-		return 0;
-
 	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
 
 	regulator_disable(ctx->iovcc);
 	regulator_disable(ctx->vcc);
 
-	ctx->prepared = false;
-
 	return 0;
 }
 
@@ -280,9 +274,6 @@ static int hx8394_prepare(struct drm_panel *panel)
 	struct hx8394 *ctx = panel_to_hx8394(panel);
 	int ret;
 
-	if (ctx->prepared)
-		return 0;
-
 	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
 
 	ret = regulator_enable(ctx->vcc);
@@ -301,8 +292,6 @@ static int hx8394_prepare(struct drm_panel *panel)
 
 	msleep(180);
 
-	ctx->prepared = true;
-
 	return 0;
 
 disable_vcc:
-- 
2.34.1

[PATCH V2 01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Drop the panel specific prepare/unprepare logic. This is now tracked
by the DRM stack [1].

[1] commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled in
drm_panel")

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/gpu/drm/panel/panel-himax-hx8394.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
index c73243d85de7..3823ff388b96 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
@@ -68,7 +68,6 @@ struct hx8394 {
 	struct gpio_desc *reset_gpio;
 	struct regulator *vcc;
 	struct regulator *iovcc;
-	bool prepared;
 
 	const struct hx8394_panel_desc *desc;
 };
@@ -262,16 +261,11 @@ static int hx8394_unprepare(struct drm_panel *panel)
 {
 	struct hx8394 *ctx = panel_to_hx8394(panel);
 
-	if (!ctx->prepared)
-		return 0;
-
 	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
 
 	regulator_disable(ctx->iovcc);
 	regulator_disable(ctx->vcc);
 
-	ctx->prepared = false;
-
 	return 0;
 }
 
@@ -280,9 +274,6 @@ static int hx8394_prepare(struct drm_panel *panel)
 	struct hx8394 *ctx = panel_to_hx8394(panel);
 	int ret;
 
-	if (ctx->prepared)
-		return 0;
-
 	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
 
 	ret = regulator_enable(ctx->vcc);
@@ -301,8 +292,6 @@ static int hx8394_prepare(struct drm_panel *panel)
 
 	msleep(180);
 
-	ctx->prepared = true;
-
 	return 0;
 
 disable_vcc:
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH V2 01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking

[neil.armstrong]

On 04/12/2023 19:57, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Drop the panel specific prepare/unprepare logic. This is now tracked
> by the DRM stack [1].
> 
> [1] commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled in
> drm_panel")
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx8394.c | 11 -----------
>   1 file changed, 11 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> index c73243d85de7..3823ff388b96 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> @@ -68,7 +68,6 @@ struct hx8394 {
>   	struct gpio_desc *reset_gpio;
>   	struct regulator *vcc;
>   	struct regulator *iovcc;
> -	bool prepared;
>   
>   	const struct hx8394_panel_desc *desc;
>   };
> @@ -262,16 +261,11 @@ static int hx8394_unprepare(struct drm_panel *panel)
>   {
>   	struct hx8394 *ctx = panel_to_hx8394(panel);
>   
> -	if (!ctx->prepared)
> -		return 0;
> -
>   	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>   
>   	regulator_disable(ctx->iovcc);
>   	regulator_disable(ctx->vcc);
>   
> -	ctx->prepared = false;
> -
>   	return 0;
>   }
>   
> @@ -280,9 +274,6 @@ static int hx8394_prepare(struct drm_panel *panel)
>   	struct hx8394 *ctx = panel_to_hx8394(panel);
>   	int ret;
>   
> -	if (ctx->prepared)
> -		return 0;
> -
>   	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>   
>   	ret = regulator_enable(ctx->vcc);
> @@ -301,8 +292,6 @@ static int hx8394_prepare(struct drm_panel *panel)
>   
>   	msleep(180);
>   
> -	ctx->prepared = true;
> -
>   	return 0;
>   
>   disable_vcc:

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH V2 01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking

[neil.armstrong]

On 04/12/2023 19:57, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Drop the panel specific prepare/unprepare logic. This is now tracked
> by the DRM stack [1].
> 
> [1] commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled in
> drm_panel")
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx8394.c | 11 -----------
>   1 file changed, 11 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> index c73243d85de7..3823ff388b96 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> @@ -68,7 +68,6 @@ struct hx8394 {
>   	struct gpio_desc *reset_gpio;
>   	struct regulator *vcc;
>   	struct regulator *iovcc;
> -	bool prepared;
>   
>   	const struct hx8394_panel_desc *desc;
>   };
> @@ -262,16 +261,11 @@ static int hx8394_unprepare(struct drm_panel *panel)
>   {
>   	struct hx8394 *ctx = panel_to_hx8394(panel);
>   
> -	if (!ctx->prepared)
> -		return 0;
> -
>   	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>   
>   	regulator_disable(ctx->iovcc);
>   	regulator_disable(ctx->vcc);
>   
> -	ctx->prepared = false;
> -
>   	return 0;
>   }
>   
> @@ -280,9 +274,6 @@ static int hx8394_prepare(struct drm_panel *panel)
>   	struct hx8394 *ctx = panel_to_hx8394(panel);
>   	int ret;
>   
> -	if (ctx->prepared)
> -		return 0;
> -
>   	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>   
>   	ret = regulator_enable(ctx->vcc);
> @@ -301,8 +292,6 @@ static int hx8394_prepare(struct drm_panel *panel)
>   
>   	msleep(180);
>   
> -	ctx->prepared = true;
> -
>   	return 0;
>   
>   disable_vcc:

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH V2 01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking

[neil.armstrong]

On 04/12/2023 19:57, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Drop the panel specific prepare/unprepare logic. This is now tracked
> by the DRM stack [1].
> 
> [1] commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled in
> drm_panel")
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx8394.c | 11 -----------
>   1 file changed, 11 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> index c73243d85de7..3823ff388b96 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> @@ -68,7 +68,6 @@ struct hx8394 {
>   	struct gpio_desc *reset_gpio;
>   	struct regulator *vcc;
>   	struct regulator *iovcc;
> -	bool prepared;
>   
>   	const struct hx8394_panel_desc *desc;
>   };
> @@ -262,16 +261,11 @@ static int hx8394_unprepare(struct drm_panel *panel)
>   {
>   	struct hx8394 *ctx = panel_to_hx8394(panel);
>   
> -	if (!ctx->prepared)
> -		return 0;
> -
>   	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>   
>   	regulator_disable(ctx->iovcc);
>   	regulator_disable(ctx->vcc);
>   
> -	ctx->prepared = false;
> -
>   	return 0;
>   }
>   
> @@ -280,9 +274,6 @@ static int hx8394_prepare(struct drm_panel *panel)
>   	struct hx8394 *ctx = panel_to_hx8394(panel);
>   	int ret;
>   
> -	if (ctx->prepared)
> -		return 0;
> -
>   	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>   
>   	ret = regulator_enable(ctx->vcc);
> @@ -301,8 +292,6 @@ static int hx8394_prepare(struct drm_panel *panel)
>   
>   	msleep(180);
>   
> -	ctx->prepared = true;
> -
>   	return 0;
>   
>   disable_vcc:

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH V2 02/10] drm/panel: himax-hx8394: Drop shutdown logic

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

The driver shutdown is duplicate as it calls drm_unprepare and
drm_disable which are called anyway when associated drivers are
shutdown/removed.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/gpu/drm/panel/panel-himax-hx8394.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
index 3823ff388b96..d8e590d5e1da 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
@@ -390,27 +390,11 @@ static int hx8394_probe(struct mipi_dsi_device *dsi)
 	return 0;
 }
 
-static void hx8394_shutdown(struct mipi_dsi_device *dsi)
-{
-	struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi);
-	int ret;
-
-	ret = drm_panel_disable(&ctx->panel);
-	if (ret < 0)
-		dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
-
-	ret = drm_panel_unprepare(&ctx->panel);
-	if (ret < 0)
-		dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
-}
-
 static void hx8394_remove(struct mipi_dsi_device *dsi)
 {
 	struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi);
 	int ret;
 
-	hx8394_shutdown(dsi);
-
 	ret = mipi_dsi_detach(dsi);
 	if (ret < 0)
 		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
@@ -427,7 +411,6 @@ MODULE_DEVICE_TABLE(of, hx8394_of_match);
 static struct mipi_dsi_driver hx8394_driver = {
 	.probe	= hx8394_probe,
 	.remove = hx8394_remove,
-	.shutdown = hx8394_shutdown,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = hx8394_of_match,
-- 
2.34.1

[PATCH V2 02/10] drm/panel: himax-hx8394: Drop shutdown logic

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

The driver shutdown is duplicate as it calls drm_unprepare and
drm_disable which are called anyway when associated drivers are
shutdown/removed.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/gpu/drm/panel/panel-himax-hx8394.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
index 3823ff388b96..d8e590d5e1da 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
@@ -390,27 +390,11 @@ static int hx8394_probe(struct mipi_dsi_device *dsi)
 	return 0;
 }
 
-static void hx8394_shutdown(struct mipi_dsi_device *dsi)
-{
-	struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi);
-	int ret;
-
-	ret = drm_panel_disable(&ctx->panel);
-	if (ret < 0)
-		dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
-
-	ret = drm_panel_unprepare(&ctx->panel);
-	if (ret < 0)
-		dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
-}
-
 static void hx8394_remove(struct mipi_dsi_device *dsi)
 {
 	struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi);
 	int ret;
 
-	hx8394_shutdown(dsi);
-
 	ret = mipi_dsi_detach(dsi);
 	if (ret < 0)
 		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
@@ -427,7 +411,6 @@ MODULE_DEVICE_TABLE(of, hx8394_of_match);
 static struct mipi_dsi_driver hx8394_driver = {
 	.probe	= hx8394_probe,
 	.remove = hx8394_remove,
-	.shutdown = hx8394_shutdown,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = hx8394_of_match,
-- 
2.34.1

[PATCH V2 02/10] drm/panel: himax-hx8394: Drop shutdown logic

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

The driver shutdown is duplicate as it calls drm_unprepare and
drm_disable which are called anyway when associated drivers are
shutdown/removed.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/gpu/drm/panel/panel-himax-hx8394.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
index 3823ff388b96..d8e590d5e1da 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
@@ -390,27 +390,11 @@ static int hx8394_probe(struct mipi_dsi_device *dsi)
 	return 0;
 }
 
-static void hx8394_shutdown(struct mipi_dsi_device *dsi)
-{
-	struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi);
-	int ret;
-
-	ret = drm_panel_disable(&ctx->panel);
-	if (ret < 0)
-		dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
-
-	ret = drm_panel_unprepare(&ctx->panel);
-	if (ret < 0)
-		dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
-}
-
 static void hx8394_remove(struct mipi_dsi_device *dsi)
 {
 	struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi);
 	int ret;
 
-	hx8394_shutdown(dsi);
-
 	ret = mipi_dsi_detach(dsi);
 	if (ret < 0)
 		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
@@ -427,7 +411,6 @@ MODULE_DEVICE_TABLE(of, hx8394_of_match);
 static struct mipi_dsi_driver hx8394_driver = {
 	.probe	= hx8394_probe,
 	.remove = hx8394_remove,
-	.shutdown = hx8394_shutdown,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = hx8394_of_match,
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH V2 02/10] drm/panel: himax-hx8394: Drop shutdown logic

[neil.armstrong]

On 04/12/2023 19:57, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> The driver shutdown is duplicate as it calls drm_unprepare and
> drm_disable which are called anyway when associated drivers are
> shutdown/removed.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx8394.c | 17 -----------------
>   1 file changed, 17 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> index 3823ff388b96..d8e590d5e1da 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> @@ -390,27 +390,11 @@ static int hx8394_probe(struct mipi_dsi_device *dsi)
>   	return 0;
>   }
>   
> -static void hx8394_shutdown(struct mipi_dsi_device *dsi)
> -{
> -	struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi);
> -	int ret;
> -
> -	ret = drm_panel_disable(&ctx->panel);
> -	if (ret < 0)
> -		dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
> -
> -	ret = drm_panel_unprepare(&ctx->panel);
> -	if (ret < 0)
> -		dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
> -}
> -
>   static void hx8394_remove(struct mipi_dsi_device *dsi)
>   {
>   	struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi);
>   	int ret;
>   
> -	hx8394_shutdown(dsi);
> -
>   	ret = mipi_dsi_detach(dsi);
>   	if (ret < 0)
>   		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
> @@ -427,7 +411,6 @@ MODULE_DEVICE_TABLE(of, hx8394_of_match);
>   static struct mipi_dsi_driver hx8394_driver = {
>   	.probe	= hx8394_probe,
>   	.remove = hx8394_remove,
> -	.shutdown = hx8394_shutdown,
>   	.driver = {
>   		.name = DRV_NAME,
>   		.of_match_table = hx8394_of_match,

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH V2 02/10] drm/panel: himax-hx8394: Drop shutdown logic

[neil.armstrong]

On 04/12/2023 19:57, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> The driver shutdown is duplicate as it calls drm_unprepare and
> drm_disable which are called anyway when associated drivers are
> shutdown/removed.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx8394.c | 17 -----------------
>   1 file changed, 17 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> index 3823ff388b96..d8e590d5e1da 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> @@ -390,27 +390,11 @@ static int hx8394_probe(struct mipi_dsi_device *dsi)
>   	return 0;
>   }
>   
> -static void hx8394_shutdown(struct mipi_dsi_device *dsi)
> -{
> -	struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi);
> -	int ret;
> -
> -	ret = drm_panel_disable(&ctx->panel);
> -	if (ret < 0)
> -		dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
> -
> -	ret = drm_panel_unprepare(&ctx->panel);
> -	if (ret < 0)
> -		dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
> -}
> -
>   static void hx8394_remove(struct mipi_dsi_device *dsi)
>   {
>   	struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi);
>   	int ret;
>   
> -	hx8394_shutdown(dsi);
> -
>   	ret = mipi_dsi_detach(dsi);
>   	if (ret < 0)
>   		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
> @@ -427,7 +411,6 @@ MODULE_DEVICE_TABLE(of, hx8394_of_match);
>   static struct mipi_dsi_driver hx8394_driver = {
>   	.probe	= hx8394_probe,
>   	.remove = hx8394_remove,
> -	.shutdown = hx8394_shutdown,
>   	.driver = {
>   		.name = DRV_NAME,
>   		.of_match_table = hx8394_of_match,

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH V2 02/10] drm/panel: himax-hx8394: Drop shutdown logic

[neil.armstrong]

On 04/12/2023 19:57, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> The driver shutdown is duplicate as it calls drm_unprepare and
> drm_disable which are called anyway when associated drivers are
> shutdown/removed.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx8394.c | 17 -----------------
>   1 file changed, 17 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> index 3823ff388b96..d8e590d5e1da 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> @@ -390,27 +390,11 @@ static int hx8394_probe(struct mipi_dsi_device *dsi)
>   	return 0;
>   }
>   
> -static void hx8394_shutdown(struct mipi_dsi_device *dsi)
> -{
> -	struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi);
> -	int ret;
> -
> -	ret = drm_panel_disable(&ctx->panel);
> -	if (ret < 0)
> -		dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
> -
> -	ret = drm_panel_unprepare(&ctx->panel);
> -	if (ret < 0)
> -		dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
> -}
> -
>   static void hx8394_remove(struct mipi_dsi_device *dsi)
>   {
>   	struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi);
>   	int ret;
>   
> -	hx8394_shutdown(dsi);
> -
>   	ret = mipi_dsi_detach(dsi);
>   	if (ret < 0)
>   		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
> @@ -427,7 +411,6 @@ MODULE_DEVICE_TABLE(of, hx8394_of_match);
>   static struct mipi_dsi_driver hx8394_driver = {
>   	.probe	= hx8394_probe,
>   	.remove = hx8394_remove,
> -	.shutdown = hx8394_shutdown,
>   	.driver = {
>   		.name = DRV_NAME,
>   		.of_match_table = hx8394_of_match,

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH V2 03/10] dt-bindings: display: Document Himax HX8394 panel rotation

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Document panel rotation for Himax HX8394 display panel.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/display/panel/himax,hx8394.yaml         | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
index ffb35288ffbb..3096debca55c 100644
--- a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
+++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
@@ -31,6 +31,8 @@ properties:
 
   backlight: true
 
+  rotation: true
+
   port: true
 
   vcc-supply:
-- 
2.34.1

[PATCH V2 03/10] dt-bindings: display: Document Himax HX8394 panel rotation

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Document panel rotation for Himax HX8394 display panel.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/display/panel/himax,hx8394.yaml         | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
index ffb35288ffbb..3096debca55c 100644
--- a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
+++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
@@ -31,6 +31,8 @@ properties:
 
   backlight: true
 
+  rotation: true
+
   port: true
 
   vcc-supply:
-- 
2.34.1

[PATCH V2 03/10] dt-bindings: display: Document Himax HX8394 panel rotation

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Document panel rotation for Himax HX8394 display panel.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/display/panel/himax,hx8394.yaml         | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
index ffb35288ffbb..3096debca55c 100644
--- a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
+++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
@@ -31,6 +31,8 @@ properties:
 
   backlight: true
 
+  rotation: true
+
   port: true
 
   vcc-supply:
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH V2 04/10] drm/panel: himax-hx8394: Add Panel Rotation Support

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for setting the rotation property for the Himax HX8394
panel.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/gpu/drm/panel/panel-himax-hx8394.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
index d8e590d5e1da..b68ea09f4725 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
@@ -68,6 +68,7 @@ struct hx8394 {
 	struct gpio_desc *reset_gpio;
 	struct regulator *vcc;
 	struct regulator *iovcc;
+	enum drm_panel_orientation orientation;
 
 	const struct hx8394_panel_desc *desc;
 };
@@ -324,12 +325,20 @@ static int hx8394_get_modes(struct drm_panel *panel,
 	return 1;
 }
 
+static enum drm_panel_orientation hx8394_get_orientation(struct drm_panel *panel)
+{
+	struct hx8394 *ctx = panel_to_hx8394(panel);
+
+	return ctx->orientation;
+}
+
 static const struct drm_panel_funcs hx8394_drm_funcs = {
 	.disable   = hx8394_disable,
 	.unprepare = hx8394_unprepare,
 	.prepare   = hx8394_prepare,
 	.enable	   = hx8394_enable,
 	.get_modes = hx8394_get_modes,
+	.get_orientation = hx8394_get_orientation,
 };
 
 static int hx8394_probe(struct mipi_dsi_device *dsi)
@@ -347,6 +356,12 @@ static int hx8394_probe(struct mipi_dsi_device *dsi)
 		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
 				     "Failed to get reset gpio\n");
 
+	ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
+	if (ret < 0) {
+		dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, ret);
+		return ret;
+	}
+
 	mipi_dsi_set_drvdata(dsi, ctx);
 
 	ctx->dev = dev;
-- 
2.34.1

[PATCH V2 04/10] drm/panel: himax-hx8394: Add Panel Rotation Support

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for setting the rotation property for the Himax HX8394
panel.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/gpu/drm/panel/panel-himax-hx8394.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
index d8e590d5e1da..b68ea09f4725 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
@@ -68,6 +68,7 @@ struct hx8394 {
 	struct gpio_desc *reset_gpio;
 	struct regulator *vcc;
 	struct regulator *iovcc;
+	enum drm_panel_orientation orientation;
 
 	const struct hx8394_panel_desc *desc;
 };
@@ -324,12 +325,20 @@ static int hx8394_get_modes(struct drm_panel *panel,
 	return 1;
 }
 
+static enum drm_panel_orientation hx8394_get_orientation(struct drm_panel *panel)
+{
+	struct hx8394 *ctx = panel_to_hx8394(panel);
+
+	return ctx->orientation;
+}
+
 static const struct drm_panel_funcs hx8394_drm_funcs = {
 	.disable   = hx8394_disable,
 	.unprepare = hx8394_unprepare,
 	.prepare   = hx8394_prepare,
 	.enable	   = hx8394_enable,
 	.get_modes = hx8394_get_modes,
+	.get_orientation = hx8394_get_orientation,
 };
 
 static int hx8394_probe(struct mipi_dsi_device *dsi)
@@ -347,6 +356,12 @@ static int hx8394_probe(struct mipi_dsi_device *dsi)
 		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
 				     "Failed to get reset gpio\n");
 
+	ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
+	if (ret < 0) {
+		dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, ret);
+		return ret;
+	}
+
 	mipi_dsi_set_drvdata(dsi, ctx);
 
 	ctx->dev = dev;
-- 
2.34.1

[PATCH V2 04/10] drm/panel: himax-hx8394: Add Panel Rotation Support

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for setting the rotation property for the Himax HX8394
panel.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/gpu/drm/panel/panel-himax-hx8394.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
index d8e590d5e1da..b68ea09f4725 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
@@ -68,6 +68,7 @@ struct hx8394 {
 	struct gpio_desc *reset_gpio;
 	struct regulator *vcc;
 	struct regulator *iovcc;
+	enum drm_panel_orientation orientation;
 
 	const struct hx8394_panel_desc *desc;
 };
@@ -324,12 +325,20 @@ static int hx8394_get_modes(struct drm_panel *panel,
 	return 1;
 }
 
+static enum drm_panel_orientation hx8394_get_orientation(struct drm_panel *panel)
+{
+	struct hx8394 *ctx = panel_to_hx8394(panel);
+
+	return ctx->orientation;
+}
+
 static const struct drm_panel_funcs hx8394_drm_funcs = {
 	.disable   = hx8394_disable,
 	.unprepare = hx8394_unprepare,
 	.prepare   = hx8394_prepare,
 	.enable	   = hx8394_enable,
 	.get_modes = hx8394_get_modes,
+	.get_orientation = hx8394_get_orientation,
 };
 
 static int hx8394_probe(struct mipi_dsi_device *dsi)
@@ -347,6 +356,12 @@ static int hx8394_probe(struct mipi_dsi_device *dsi)
 		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
 				     "Failed to get reset gpio\n");
 
+	ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
+	if (ret < 0) {
+		dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, ret);
+		return ret;
+	}
+
 	mipi_dsi_set_drvdata(dsi, ctx);
 
 	ctx->dev = dev;
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH V2 04/10] drm/panel: himax-hx8394: Add Panel Rotation Support

[neil.armstrong]

On 04/12/2023 19:57, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for setting the rotation property for the Himax HX8394
> panel.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx8394.c | 15 +++++++++++++++
>   1 file changed, 15 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> index d8e590d5e1da..b68ea09f4725 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> @@ -68,6 +68,7 @@ struct hx8394 {
>   	struct gpio_desc *reset_gpio;
>   	struct regulator *vcc;
>   	struct regulator *iovcc;
> +	enum drm_panel_orientation orientation;
>   
>   	const struct hx8394_panel_desc *desc;
>   };
> @@ -324,12 +325,20 @@ static int hx8394_get_modes(struct drm_panel *panel,
>   	return 1;
>   }
>   
> +static enum drm_panel_orientation hx8394_get_orientation(struct drm_panel *panel)
> +{
> +	struct hx8394 *ctx = panel_to_hx8394(panel);
> +
> +	return ctx->orientation;
> +}
> +
>   static const struct drm_panel_funcs hx8394_drm_funcs = {
>   	.disable   = hx8394_disable,
>   	.unprepare = hx8394_unprepare,
>   	.prepare   = hx8394_prepare,
>   	.enable	   = hx8394_enable,
>   	.get_modes = hx8394_get_modes,
> +	.get_orientation = hx8394_get_orientation,
>   };
>   
>   static int hx8394_probe(struct mipi_dsi_device *dsi)
> @@ -347,6 +356,12 @@ static int hx8394_probe(struct mipi_dsi_device *dsi)
>   		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
>   				     "Failed to get reset gpio\n");
>   
> +	ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
> +	if (ret < 0) {
> +		dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, ret);
> +		return ret;
> +	}
> +
>   	mipi_dsi_set_drvdata(dsi, ctx);
>   
>   	ctx->dev = dev;

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH V2 04/10] drm/panel: himax-hx8394: Add Panel Rotation Support

[neil.armstrong]

On 04/12/2023 19:57, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for setting the rotation property for the Himax HX8394
> panel.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx8394.c | 15 +++++++++++++++
>   1 file changed, 15 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> index d8e590d5e1da..b68ea09f4725 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> @@ -68,6 +68,7 @@ struct hx8394 {
>   	struct gpio_desc *reset_gpio;
>   	struct regulator *vcc;
>   	struct regulator *iovcc;
> +	enum drm_panel_orientation orientation;
>   
>   	const struct hx8394_panel_desc *desc;
>   };
> @@ -324,12 +325,20 @@ static int hx8394_get_modes(struct drm_panel *panel,
>   	return 1;
>   }
>   
> +static enum drm_panel_orientation hx8394_get_orientation(struct drm_panel *panel)
> +{
> +	struct hx8394 *ctx = panel_to_hx8394(panel);
> +
> +	return ctx->orientation;
> +}
> +
>   static const struct drm_panel_funcs hx8394_drm_funcs = {
>   	.disable   = hx8394_disable,
>   	.unprepare = hx8394_unprepare,
>   	.prepare   = hx8394_prepare,
>   	.enable	   = hx8394_enable,
>   	.get_modes = hx8394_get_modes,
> +	.get_orientation = hx8394_get_orientation,
>   };
>   
>   static int hx8394_probe(struct mipi_dsi_device *dsi)
> @@ -347,6 +356,12 @@ static int hx8394_probe(struct mipi_dsi_device *dsi)
>   		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
>   				     "Failed to get reset gpio\n");
>   
> +	ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
> +	if (ret < 0) {
> +		dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, ret);
> +		return ret;
> +	}
> +
>   	mipi_dsi_set_drvdata(dsi, ctx);
>   
>   	ctx->dev = dev;

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH V2 04/10] drm/panel: himax-hx8394: Add Panel Rotation Support

[neil.armstrong]

On 04/12/2023 19:57, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for setting the rotation property for the Himax HX8394
> panel.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx8394.c | 15 +++++++++++++++
>   1 file changed, 15 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> index d8e590d5e1da..b68ea09f4725 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> @@ -68,6 +68,7 @@ struct hx8394 {
>   	struct gpio_desc *reset_gpio;
>   	struct regulator *vcc;
>   	struct regulator *iovcc;
> +	enum drm_panel_orientation orientation;
>   
>   	const struct hx8394_panel_desc *desc;
>   };
> @@ -324,12 +325,20 @@ static int hx8394_get_modes(struct drm_panel *panel,
>   	return 1;
>   }
>   
> +static enum drm_panel_orientation hx8394_get_orientation(struct drm_panel *panel)
> +{
> +	struct hx8394 *ctx = panel_to_hx8394(panel);
> +
> +	return ctx->orientation;
> +}
> +
>   static const struct drm_panel_funcs hx8394_drm_funcs = {
>   	.disable   = hx8394_disable,
>   	.unprepare = hx8394_unprepare,
>   	.prepare   = hx8394_prepare,
>   	.enable	   = hx8394_enable,
>   	.get_modes = hx8394_get_modes,
> +	.get_orientation = hx8394_get_orientation,
>   };
>   
>   static int hx8394_probe(struct mipi_dsi_device *dsi)
> @@ -347,6 +356,12 @@ static int hx8394_probe(struct mipi_dsi_device *dsi)
>   		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
>   				     "Failed to get reset gpio\n");
>   
> +	ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
> +	if (ret < 0) {
> +		dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, ret);
> +		return ret;
> +	}
> +
>   	mipi_dsi_set_drvdata(dsi, ctx);
>   
>   	ctx->dev = dev;

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH V2 05/10] dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add compatible string for the Powkiddy X55 panel.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/display/panel/himax,hx8394.yaml          | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
index 3096debca55c..916bb7f94206 100644
--- a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
+++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
@@ -23,6 +23,7 @@ properties:
     items:
       - enum:
           - hannstar,hsd060bhw4
+          - powkiddy,x55-panel
       - const: himax,hx8394
 
   reg: true
-- 
2.34.1

[PATCH V2 05/10] dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add compatible string for the Powkiddy X55 panel.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/display/panel/himax,hx8394.yaml          | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
index 3096debca55c..916bb7f94206 100644
--- a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
+++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
@@ -23,6 +23,7 @@ properties:
     items:
       - enum:
           - hannstar,hsd060bhw4
+          - powkiddy,x55-panel
       - const: himax,hx8394
 
   reg: true
-- 
2.34.1

[PATCH V2 05/10] dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add compatible string for the Powkiddy X55 panel.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/display/panel/himax,hx8394.yaml          | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
index 3096debca55c..916bb7f94206 100644
--- a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
+++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
@@ -23,6 +23,7 @@ properties:
     items:
       - enum:
           - hannstar,hsd060bhw4
+          - powkiddy,x55-panel
       - const: himax,hx8394
 
   reg: true
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH V2 06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for the Powkiddy X55 panel as used on the Powkiddy X55
handheld gaming console. This panel uses a Himax HX8394 display
controller and requires a vendor provided init sequence. The display
resolution is 720x1280 and is 67mm by 121mm as measured with calipers.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/gpu/drm/panel/panel-himax-hx8394.c | 137 +++++++++++++++++++++
 1 file changed, 137 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
index b68ea09f4725..ff0dc08b9829 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
@@ -38,6 +38,7 @@
 #define HX8394_CMD_SETMIPI	  0xba
 #define HX8394_CMD_SETOTP	  0xbb
 #define HX8394_CMD_SETREGBANK	  0xbd
+#define HX8394_CMD_UNKNOWN5	  0xbf
 #define HX8394_CMD_UNKNOWN1	  0xc0
 #define HX8394_CMD_SETDGCLUT	  0xc1
 #define HX8394_CMD_SETID	  0xc3
@@ -52,6 +53,7 @@
 #define HX8394_CMD_SETGIP1	  0xd5
 #define HX8394_CMD_SETGIP2	  0xd6
 #define HX8394_CMD_SETGPO	  0xd6
+#define HX8394_CMD_UNKNOWN4	  0xd8
 #define HX8394_CMD_SETSCALING	  0xdd
 #define HX8394_CMD_SETIDLE	  0xdf
 #define HX8394_CMD_SETGAMMA	  0xe0
@@ -203,6 +205,140 @@ static const struct hx8394_panel_desc hsd060bhw4_desc = {
 	.init_sequence = hsd060bhw4_init_sequence,
 };
 
+static int powkiddy_x55_init_sequence(struct hx8394 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	/* 5.19.8 SETEXTC: Set extension command (B9h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETEXTC,
+			       0xff, 0x83, 0x94);
+
+	/* 5.19.9 SETMIPI: Set MIPI control (BAh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETMIPI,
+			       0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0);
+
+	/* 5.19.2 SETPOWER: Set power (B1h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
+			       0x48, 0x12, 0x72, 0x09, 0x32, 0x54, 0x71, 0x71, 0x57, 0x47);
+
+	/* 5.19.3 SETDISP: Set display related register (B2h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETDISP,
+			       0x00, 0x80, 0x64, 0x2c, 0x16, 0x2f);
+
+	/* 5.19.4 SETCYC: Set display waveform cycles (B4h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETCYC,
+			       0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c, 0x86, 0x75,
+			       0x00, 0x3f, 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c,
+			       0x86);
+
+	/* 5.19.5 SETVCOM: Set VCOM voltage (B6h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETVCOM,
+			       0x6e, 0x6e);
+
+	/* 5.19.19 SETGIP0: Set GIP Option0 (D3h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP0,
+			       0x00, 0x00, 0x07, 0x07, 0x40, 0x07, 0x0c, 0x00, 0x08, 0x10,
+			       0x08, 0x00, 0x08, 0x54, 0x15, 0x0a, 0x05, 0x0a, 0x02, 0x15,
+			       0x06, 0x05, 0x06, 0x47, 0x44, 0x0a, 0x0a, 0x4b, 0x10, 0x07,
+			       0x07, 0x0c, 0x40);
+
+	/* 5.19.20 Set GIP Option1 (D5h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP1,
+			       0x1c, 0x1c, 0x1d, 0x1d, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
+			       0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x24, 0x25, 0x18, 0x18,
+			       0x26, 0x27, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x20, 0x21,
+			       0x18, 0x18, 0x18, 0x18);
+
+	/* 5.19.21 Set GIP Option2 (D6h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP2,
+			       0x1c, 0x1c, 0x1d, 0x1d, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02,
+			       0x01, 0x00, 0x0b, 0x0a, 0x09, 0x08, 0x21, 0x20, 0x18, 0x18,
+			       0x27, 0x26, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x25, 0x24,
+			       0x18, 0x18, 0x18, 0x18);
+
+	/* 5.19.25 SETGAMMA: Set gamma curve related setting (E0h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGAMMA,
+			       0x00, 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56,
+			       0x65, 0x66, 0x6e, 0x82, 0x88, 0x8b, 0x9a, 0x9d, 0x98, 0xa8,
+			       0xb9, 0x5d, 0x5c, 0x61, 0x66, 0x6a, 0x6f, 0x7f, 0x7f, 0x00,
+			       0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56, 0x65,
+			       0x65, 0x6e, 0x81, 0x87, 0x8b, 0x98, 0x9d, 0x99, 0xa8, 0xba,
+			       0x5d, 0x5d, 0x62, 0x67, 0x6b, 0x72, 0x7f, 0x7f);
+
+	/* Unknown command, not listed in the HX8394-F datasheet */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN1,
+			       0x1f, 0x31);
+
+	/* 5.19.17 SETPANEL (CCh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPANEL,
+			       0x0b);
+
+	/* Unknown command, not listed in the HX8394-F datasheet */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN3,
+			       0x02);
+
+	/* 5.19.11 Set register bank (BDh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+			       0x02);
+
+	/* Unknown command, not listed in the HX8394-F datasheet */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN4,
+			       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+			       0xff, 0xff);
+
+	/* 5.19.11 Set register bank (BDh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+			       0x00);
+
+	/* 5.19.11 Set register bank (BDh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+			       0x01);
+
+	/* 5.19.2 SETPOWER: Set power (B1h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
+			       0x00);
+
+	/* 5.19.11 Set register bank (BDh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+			       0x00);
+
+	/* Unknown command, not listed in the HX8394-F datasheet */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN5,
+			       0x40, 0x81, 0x50, 0x00, 0x1a, 0xfc, 0x01);
+
+	/* Unknown command, not listed in the HX8394-F datasheet */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN2,
+			       0xed);
+
+	return 0;
+}
+
+static const struct drm_display_mode powkiddy_x55_mode = {
+	.hdisplay	= 720,
+	.hsync_start	= 720 + 44,
+	.hsync_end	= 720 + 44 + 20,
+	.htotal		= 720 + 44 + 20 + 20,
+	.vdisplay	= 1280,
+	.vsync_start	= 1280 + 12,
+	.vsync_end	= 1280 + 12 + 10,
+	.vtotal		= 1280 + 12 + 10 + 10,
+	.clock		= 63290,
+	.flags		= DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.width_mm	= 67,
+	.height_mm	= 121,
+};
+
+static const struct hx8394_panel_desc powkiddy_x55_desc = {
+	.mode = &powkiddy_x55_mode,
+	.lanes = 4,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+		      MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET,
+	.format = MIPI_DSI_FMT_RGB888,
+	.init_sequence = powkiddy_x55_init_sequence,
+};
+
 static int hx8394_enable(struct drm_panel *panel)
 {
 	struct hx8394 *ctx = panel_to_hx8394(panel);
@@ -419,6 +555,7 @@ static void hx8394_remove(struct mipi_dsi_device *dsi)
 
 static const struct of_device_id hx8394_of_match[] = {
 	{ .compatible = "hannstar,hsd060bhw4", .data = &hsd060bhw4_desc },
+	{ .compatible = "powkiddy,x55-panel", .data = &powkiddy_x55_desc },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, hx8394_of_match);
-- 
2.34.1

[PATCH V2 06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for the Powkiddy X55 panel as used on the Powkiddy X55
handheld gaming console. This panel uses a Himax HX8394 display
controller and requires a vendor provided init sequence. The display
resolution is 720x1280 and is 67mm by 121mm as measured with calipers.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/gpu/drm/panel/panel-himax-hx8394.c | 137 +++++++++++++++++++++
 1 file changed, 137 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
index b68ea09f4725..ff0dc08b9829 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
@@ -38,6 +38,7 @@
 #define HX8394_CMD_SETMIPI	  0xba
 #define HX8394_CMD_SETOTP	  0xbb
 #define HX8394_CMD_SETREGBANK	  0xbd
+#define HX8394_CMD_UNKNOWN5	  0xbf
 #define HX8394_CMD_UNKNOWN1	  0xc0
 #define HX8394_CMD_SETDGCLUT	  0xc1
 #define HX8394_CMD_SETID	  0xc3
@@ -52,6 +53,7 @@
 #define HX8394_CMD_SETGIP1	  0xd5
 #define HX8394_CMD_SETGIP2	  0xd6
 #define HX8394_CMD_SETGPO	  0xd6
+#define HX8394_CMD_UNKNOWN4	  0xd8
 #define HX8394_CMD_SETSCALING	  0xdd
 #define HX8394_CMD_SETIDLE	  0xdf
 #define HX8394_CMD_SETGAMMA	  0xe0
@@ -203,6 +205,140 @@ static const struct hx8394_panel_desc hsd060bhw4_desc = {
 	.init_sequence = hsd060bhw4_init_sequence,
 };
 
+static int powkiddy_x55_init_sequence(struct hx8394 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	/* 5.19.8 SETEXTC: Set extension command (B9h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETEXTC,
+			       0xff, 0x83, 0x94);
+
+	/* 5.19.9 SETMIPI: Set MIPI control (BAh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETMIPI,
+			       0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0);
+
+	/* 5.19.2 SETPOWER: Set power (B1h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
+			       0x48, 0x12, 0x72, 0x09, 0x32, 0x54, 0x71, 0x71, 0x57, 0x47);
+
+	/* 5.19.3 SETDISP: Set display related register (B2h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETDISP,
+			       0x00, 0x80, 0x64, 0x2c, 0x16, 0x2f);
+
+	/* 5.19.4 SETCYC: Set display waveform cycles (B4h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETCYC,
+			       0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c, 0x86, 0x75,
+			       0x00, 0x3f, 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c,
+			       0x86);
+
+	/* 5.19.5 SETVCOM: Set VCOM voltage (B6h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETVCOM,
+			       0x6e, 0x6e);
+
+	/* 5.19.19 SETGIP0: Set GIP Option0 (D3h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP0,
+			       0x00, 0x00, 0x07, 0x07, 0x40, 0x07, 0x0c, 0x00, 0x08, 0x10,
+			       0x08, 0x00, 0x08, 0x54, 0x15, 0x0a, 0x05, 0x0a, 0x02, 0x15,
+			       0x06, 0x05, 0x06, 0x47, 0x44, 0x0a, 0x0a, 0x4b, 0x10, 0x07,
+			       0x07, 0x0c, 0x40);
+
+	/* 5.19.20 Set GIP Option1 (D5h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP1,
+			       0x1c, 0x1c, 0x1d, 0x1d, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
+			       0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x24, 0x25, 0x18, 0x18,
+			       0x26, 0x27, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x20, 0x21,
+			       0x18, 0x18, 0x18, 0x18);
+
+	/* 5.19.21 Set GIP Option2 (D6h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP2,
+			       0x1c, 0x1c, 0x1d, 0x1d, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02,
+			       0x01, 0x00, 0x0b, 0x0a, 0x09, 0x08, 0x21, 0x20, 0x18, 0x18,
+			       0x27, 0x26, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x25, 0x24,
+			       0x18, 0x18, 0x18, 0x18);
+
+	/* 5.19.25 SETGAMMA: Set gamma curve related setting (E0h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGAMMA,
+			       0x00, 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56,
+			       0x65, 0x66, 0x6e, 0x82, 0x88, 0x8b, 0x9a, 0x9d, 0x98, 0xa8,
+			       0xb9, 0x5d, 0x5c, 0x61, 0x66, 0x6a, 0x6f, 0x7f, 0x7f, 0x00,
+			       0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56, 0x65,
+			       0x65, 0x6e, 0x81, 0x87, 0x8b, 0x98, 0x9d, 0x99, 0xa8, 0xba,
+			       0x5d, 0x5d, 0x62, 0x67, 0x6b, 0x72, 0x7f, 0x7f);
+
+	/* Unknown command, not listed in the HX8394-F datasheet */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN1,
+			       0x1f, 0x31);
+
+	/* 5.19.17 SETPANEL (CCh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPANEL,
+			       0x0b);
+
+	/* Unknown command, not listed in the HX8394-F datasheet */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN3,
+			       0x02);
+
+	/* 5.19.11 Set register bank (BDh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+			       0x02);
+
+	/* Unknown command, not listed in the HX8394-F datasheet */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN4,
+			       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+			       0xff, 0xff);
+
+	/* 5.19.11 Set register bank (BDh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+			       0x00);
+
+	/* 5.19.11 Set register bank (BDh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+			       0x01);
+
+	/* 5.19.2 SETPOWER: Set power (B1h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
+			       0x00);
+
+	/* 5.19.11 Set register bank (BDh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+			       0x00);
+
+	/* Unknown command, not listed in the HX8394-F datasheet */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN5,
+			       0x40, 0x81, 0x50, 0x00, 0x1a, 0xfc, 0x01);
+
+	/* Unknown command, not listed in the HX8394-F datasheet */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN2,
+			       0xed);
+
+	return 0;
+}
+
+static const struct drm_display_mode powkiddy_x55_mode = {
+	.hdisplay	= 720,
+	.hsync_start	= 720 + 44,
+	.hsync_end	= 720 + 44 + 20,
+	.htotal		= 720 + 44 + 20 + 20,
+	.vdisplay	= 1280,
+	.vsync_start	= 1280 + 12,
+	.vsync_end	= 1280 + 12 + 10,
+	.vtotal		= 1280 + 12 + 10 + 10,
+	.clock		= 63290,
+	.flags		= DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.width_mm	= 67,
+	.height_mm	= 121,
+};
+
+static const struct hx8394_panel_desc powkiddy_x55_desc = {
+	.mode = &powkiddy_x55_mode,
+	.lanes = 4,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+		      MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET,
+	.format = MIPI_DSI_FMT_RGB888,
+	.init_sequence = powkiddy_x55_init_sequence,
+};
+
 static int hx8394_enable(struct drm_panel *panel)
 {
 	struct hx8394 *ctx = panel_to_hx8394(panel);
@@ -419,6 +555,7 @@ static void hx8394_remove(struct mipi_dsi_device *dsi)
 
 static const struct of_device_id hx8394_of_match[] = {
 	{ .compatible = "hannstar,hsd060bhw4", .data = &hsd060bhw4_desc },
+	{ .compatible = "powkiddy,x55-panel", .data = &powkiddy_x55_desc },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, hx8394_of_match);
-- 
2.34.1

[PATCH V2 06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for the Powkiddy X55 panel as used on the Powkiddy X55
handheld gaming console. This panel uses a Himax HX8394 display
controller and requires a vendor provided init sequence. The display
resolution is 720x1280 and is 67mm by 121mm as measured with calipers.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/gpu/drm/panel/panel-himax-hx8394.c | 137 +++++++++++++++++++++
 1 file changed, 137 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
index b68ea09f4725..ff0dc08b9829 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
@@ -38,6 +38,7 @@
 #define HX8394_CMD_SETMIPI	  0xba
 #define HX8394_CMD_SETOTP	  0xbb
 #define HX8394_CMD_SETREGBANK	  0xbd
+#define HX8394_CMD_UNKNOWN5	  0xbf
 #define HX8394_CMD_UNKNOWN1	  0xc0
 #define HX8394_CMD_SETDGCLUT	  0xc1
 #define HX8394_CMD_SETID	  0xc3
@@ -52,6 +53,7 @@
 #define HX8394_CMD_SETGIP1	  0xd5
 #define HX8394_CMD_SETGIP2	  0xd6
 #define HX8394_CMD_SETGPO	  0xd6
+#define HX8394_CMD_UNKNOWN4	  0xd8
 #define HX8394_CMD_SETSCALING	  0xdd
 #define HX8394_CMD_SETIDLE	  0xdf
 #define HX8394_CMD_SETGAMMA	  0xe0
@@ -203,6 +205,140 @@ static const struct hx8394_panel_desc hsd060bhw4_desc = {
 	.init_sequence = hsd060bhw4_init_sequence,
 };
 
+static int powkiddy_x55_init_sequence(struct hx8394 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	/* 5.19.8 SETEXTC: Set extension command (B9h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETEXTC,
+			       0xff, 0x83, 0x94);
+
+	/* 5.19.9 SETMIPI: Set MIPI control (BAh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETMIPI,
+			       0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0);
+
+	/* 5.19.2 SETPOWER: Set power (B1h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
+			       0x48, 0x12, 0x72, 0x09, 0x32, 0x54, 0x71, 0x71, 0x57, 0x47);
+
+	/* 5.19.3 SETDISP: Set display related register (B2h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETDISP,
+			       0x00, 0x80, 0x64, 0x2c, 0x16, 0x2f);
+
+	/* 5.19.4 SETCYC: Set display waveform cycles (B4h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETCYC,
+			       0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c, 0x86, 0x75,
+			       0x00, 0x3f, 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c,
+			       0x86);
+
+	/* 5.19.5 SETVCOM: Set VCOM voltage (B6h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETVCOM,
+			       0x6e, 0x6e);
+
+	/* 5.19.19 SETGIP0: Set GIP Option0 (D3h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP0,
+			       0x00, 0x00, 0x07, 0x07, 0x40, 0x07, 0x0c, 0x00, 0x08, 0x10,
+			       0x08, 0x00, 0x08, 0x54, 0x15, 0x0a, 0x05, 0x0a, 0x02, 0x15,
+			       0x06, 0x05, 0x06, 0x47, 0x44, 0x0a, 0x0a, 0x4b, 0x10, 0x07,
+			       0x07, 0x0c, 0x40);
+
+	/* 5.19.20 Set GIP Option1 (D5h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP1,
+			       0x1c, 0x1c, 0x1d, 0x1d, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
+			       0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x24, 0x25, 0x18, 0x18,
+			       0x26, 0x27, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x20, 0x21,
+			       0x18, 0x18, 0x18, 0x18);
+
+	/* 5.19.21 Set GIP Option2 (D6h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP2,
+			       0x1c, 0x1c, 0x1d, 0x1d, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02,
+			       0x01, 0x00, 0x0b, 0x0a, 0x09, 0x08, 0x21, 0x20, 0x18, 0x18,
+			       0x27, 0x26, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x25, 0x24,
+			       0x18, 0x18, 0x18, 0x18);
+
+	/* 5.19.25 SETGAMMA: Set gamma curve related setting (E0h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGAMMA,
+			       0x00, 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56,
+			       0x65, 0x66, 0x6e, 0x82, 0x88, 0x8b, 0x9a, 0x9d, 0x98, 0xa8,
+			       0xb9, 0x5d, 0x5c, 0x61, 0x66, 0x6a, 0x6f, 0x7f, 0x7f, 0x00,
+			       0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56, 0x65,
+			       0x65, 0x6e, 0x81, 0x87, 0x8b, 0x98, 0x9d, 0x99, 0xa8, 0xba,
+			       0x5d, 0x5d, 0x62, 0x67, 0x6b, 0x72, 0x7f, 0x7f);
+
+	/* Unknown command, not listed in the HX8394-F datasheet */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN1,
+			       0x1f, 0x31);
+
+	/* 5.19.17 SETPANEL (CCh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPANEL,
+			       0x0b);
+
+	/* Unknown command, not listed in the HX8394-F datasheet */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN3,
+			       0x02);
+
+	/* 5.19.11 Set register bank (BDh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+			       0x02);
+
+	/* Unknown command, not listed in the HX8394-F datasheet */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN4,
+			       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+			       0xff, 0xff);
+
+	/* 5.19.11 Set register bank (BDh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+			       0x00);
+
+	/* 5.19.11 Set register bank (BDh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+			       0x01);
+
+	/* 5.19.2 SETPOWER: Set power (B1h) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
+			       0x00);
+
+	/* 5.19.11 Set register bank (BDh) */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+			       0x00);
+
+	/* Unknown command, not listed in the HX8394-F datasheet */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN5,
+			       0x40, 0x81, 0x50, 0x00, 0x1a, 0xfc, 0x01);
+
+	/* Unknown command, not listed in the HX8394-F datasheet */
+	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN2,
+			       0xed);
+
+	return 0;
+}
+
+static const struct drm_display_mode powkiddy_x55_mode = {
+	.hdisplay	= 720,
+	.hsync_start	= 720 + 44,
+	.hsync_end	= 720 + 44 + 20,
+	.htotal		= 720 + 44 + 20 + 20,
+	.vdisplay	= 1280,
+	.vsync_start	= 1280 + 12,
+	.vsync_end	= 1280 + 12 + 10,
+	.vtotal		= 1280 + 12 + 10 + 10,
+	.clock		= 63290,
+	.flags		= DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.width_mm	= 67,
+	.height_mm	= 121,
+};
+
+static const struct hx8394_panel_desc powkiddy_x55_desc = {
+	.mode = &powkiddy_x55_mode,
+	.lanes = 4,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+		      MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET,
+	.format = MIPI_DSI_FMT_RGB888,
+	.init_sequence = powkiddy_x55_init_sequence,
+};
+
 static int hx8394_enable(struct drm_panel *panel)
 {
 	struct hx8394 *ctx = panel_to_hx8394(panel);
@@ -419,6 +555,7 @@ static void hx8394_remove(struct mipi_dsi_device *dsi)
 
 static const struct of_device_id hx8394_of_match[] = {
 	{ .compatible = "hannstar,hsd060bhw4", .data = &hsd060bhw4_desc },
+	{ .compatible = "powkiddy,x55-panel", .data = &powkiddy_x55_desc },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, hx8394_of_match);
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH V2 06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel

[neil.armstrong]

On 04/12/2023 19:57, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the Powkiddy X55 panel as used on the Powkiddy X55
> handheld gaming console. This panel uses a Himax HX8394 display
> controller and requires a vendor provided init sequence. The display
> resolution is 720x1280 and is 67mm by 121mm as measured with calipers.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx8394.c | 137 +++++++++++++++++++++
>   1 file changed, 137 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> index b68ea09f4725..ff0dc08b9829 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> @@ -38,6 +38,7 @@
>   #define HX8394_CMD_SETMIPI	  0xba
>   #define HX8394_CMD_SETOTP	  0xbb
>   #define HX8394_CMD_SETREGBANK	  0xbd
> +#define HX8394_CMD_UNKNOWN5	  0xbf
>   #define HX8394_CMD_UNKNOWN1	  0xc0
>   #define HX8394_CMD_SETDGCLUT	  0xc1
>   #define HX8394_CMD_SETID	  0xc3
> @@ -52,6 +53,7 @@
>   #define HX8394_CMD_SETGIP1	  0xd5
>   #define HX8394_CMD_SETGIP2	  0xd6
>   #define HX8394_CMD_SETGPO	  0xd6
> +#define HX8394_CMD_UNKNOWN4	  0xd8
>   #define HX8394_CMD_SETSCALING	  0xdd
>   #define HX8394_CMD_SETIDLE	  0xdf
>   #define HX8394_CMD_SETGAMMA	  0xe0
> @@ -203,6 +205,140 @@ static const struct hx8394_panel_desc hsd060bhw4_desc = {
>   	.init_sequence = hsd060bhw4_init_sequence,
>   };
>   
> +static int powkiddy_x55_init_sequence(struct hx8394 *ctx)
> +{
> +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> +
> +	/* 5.19.8 SETEXTC: Set extension command (B9h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETEXTC,
> +			       0xff, 0x83, 0x94);
> +
> +	/* 5.19.9 SETMIPI: Set MIPI control (BAh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETMIPI,
> +			       0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0);
> +
> +	/* 5.19.2 SETPOWER: Set power (B1h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
> +			       0x48, 0x12, 0x72, 0x09, 0x32, 0x54, 0x71, 0x71, 0x57, 0x47);
> +
> +	/* 5.19.3 SETDISP: Set display related register (B2h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETDISP,
> +			       0x00, 0x80, 0x64, 0x2c, 0x16, 0x2f);
> +
> +	/* 5.19.4 SETCYC: Set display waveform cycles (B4h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETCYC,
> +			       0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c, 0x86, 0x75,
> +			       0x00, 0x3f, 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c,
> +			       0x86);
> +
> +	/* 5.19.5 SETVCOM: Set VCOM voltage (B6h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETVCOM,
> +			       0x6e, 0x6e);
> +
> +	/* 5.19.19 SETGIP0: Set GIP Option0 (D3h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP0,
> +			       0x00, 0x00, 0x07, 0x07, 0x40, 0x07, 0x0c, 0x00, 0x08, 0x10,
> +			       0x08, 0x00, 0x08, 0x54, 0x15, 0x0a, 0x05, 0x0a, 0x02, 0x15,
> +			       0x06, 0x05, 0x06, 0x47, 0x44, 0x0a, 0x0a, 0x4b, 0x10, 0x07,
> +			       0x07, 0x0c, 0x40);
> +
> +	/* 5.19.20 Set GIP Option1 (D5h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP1,
> +			       0x1c, 0x1c, 0x1d, 0x1d, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
> +			       0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x24, 0x25, 0x18, 0x18,
> +			       0x26, 0x27, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> +			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x20, 0x21,
> +			       0x18, 0x18, 0x18, 0x18);
> +
> +	/* 5.19.21 Set GIP Option2 (D6h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP2,
> +			       0x1c, 0x1c, 0x1d, 0x1d, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02,
> +			       0x01, 0x00, 0x0b, 0x0a, 0x09, 0x08, 0x21, 0x20, 0x18, 0x18,
> +			       0x27, 0x26, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> +			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x25, 0x24,
> +			       0x18, 0x18, 0x18, 0x18);
> +
> +	/* 5.19.25 SETGAMMA: Set gamma curve related setting (E0h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGAMMA,
> +			       0x00, 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56,
> +			       0x65, 0x66, 0x6e, 0x82, 0x88, 0x8b, 0x9a, 0x9d, 0x98, 0xa8,
> +			       0xb9, 0x5d, 0x5c, 0x61, 0x66, 0x6a, 0x6f, 0x7f, 0x7f, 0x00,
> +			       0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56, 0x65,
> +			       0x65, 0x6e, 0x81, 0x87, 0x8b, 0x98, 0x9d, 0x99, 0xa8, 0xba,
> +			       0x5d, 0x5d, 0x62, 0x67, 0x6b, 0x72, 0x7f, 0x7f);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN1,
> +			       0x1f, 0x31);
> +
> +	/* 5.19.17 SETPANEL (CCh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPANEL,
> +			       0x0b);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN3,
> +			       0x02);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x02);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN4,
> +			       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
> +			       0xff, 0xff);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x00);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x01);
> +
> +	/* 5.19.2 SETPOWER: Set power (B1h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
> +			       0x00);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x00);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN5,
> +			       0x40, 0x81, 0x50, 0x00, 0x1a, 0xfc, 0x01);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN2,
> +			       0xed);
> +
> +	return 0;
> +}
> +
> +static const struct drm_display_mode powkiddy_x55_mode = {
> +	.hdisplay	= 720,
> +	.hsync_start	= 720 + 44,
> +	.hsync_end	= 720 + 44 + 20,
> +	.htotal		= 720 + 44 + 20 + 20,
> +	.vdisplay	= 1280,
> +	.vsync_start	= 1280 + 12,
> +	.vsync_end	= 1280 + 12 + 10,
> +	.vtotal		= 1280 + 12 + 10 + 10,
> +	.clock		= 63290,
> +	.flags		= DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> +	.width_mm	= 67,
> +	.height_mm	= 121,
> +};
> +
> +static const struct hx8394_panel_desc powkiddy_x55_desc = {
> +	.mode = &powkiddy_x55_mode,
> +	.lanes = 4,
> +	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> +		      MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET,
> +	.format = MIPI_DSI_FMT_RGB888,
> +	.init_sequence = powkiddy_x55_init_sequence,
> +};
> +
>   static int hx8394_enable(struct drm_panel *panel)
>   {
>   	struct hx8394 *ctx = panel_to_hx8394(panel);
> @@ -419,6 +555,7 @@ static void hx8394_remove(struct mipi_dsi_device *dsi)
>   
>   static const struct of_device_id hx8394_of_match[] = {
>   	{ .compatible = "hannstar,hsd060bhw4", .data = &hsd060bhw4_desc },
> +	{ .compatible = "powkiddy,x55-panel", .data = &powkiddy_x55_desc },
>   	{ /* sentinel */ }
>   };
>   MODULE_DEVICE_TABLE(of, hx8394_of_match);

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH V2 06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel

[neil.armstrong]

On 04/12/2023 19:57, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the Powkiddy X55 panel as used on the Powkiddy X55
> handheld gaming console. This panel uses a Himax HX8394 display
> controller and requires a vendor provided init sequence. The display
> resolution is 720x1280 and is 67mm by 121mm as measured with calipers.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx8394.c | 137 +++++++++++++++++++++
>   1 file changed, 137 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> index b68ea09f4725..ff0dc08b9829 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> @@ -38,6 +38,7 @@
>   #define HX8394_CMD_SETMIPI	  0xba
>   #define HX8394_CMD_SETOTP	  0xbb
>   #define HX8394_CMD_SETREGBANK	  0xbd
> +#define HX8394_CMD_UNKNOWN5	  0xbf
>   #define HX8394_CMD_UNKNOWN1	  0xc0
>   #define HX8394_CMD_SETDGCLUT	  0xc1
>   #define HX8394_CMD_SETID	  0xc3
> @@ -52,6 +53,7 @@
>   #define HX8394_CMD_SETGIP1	  0xd5
>   #define HX8394_CMD_SETGIP2	  0xd6
>   #define HX8394_CMD_SETGPO	  0xd6
> +#define HX8394_CMD_UNKNOWN4	  0xd8
>   #define HX8394_CMD_SETSCALING	  0xdd
>   #define HX8394_CMD_SETIDLE	  0xdf
>   #define HX8394_CMD_SETGAMMA	  0xe0
> @@ -203,6 +205,140 @@ static const struct hx8394_panel_desc hsd060bhw4_desc = {
>   	.init_sequence = hsd060bhw4_init_sequence,
>   };
>   
> +static int powkiddy_x55_init_sequence(struct hx8394 *ctx)
> +{
> +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> +
> +	/* 5.19.8 SETEXTC: Set extension command (B9h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETEXTC,
> +			       0xff, 0x83, 0x94);
> +
> +	/* 5.19.9 SETMIPI: Set MIPI control (BAh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETMIPI,
> +			       0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0);
> +
> +	/* 5.19.2 SETPOWER: Set power (B1h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
> +			       0x48, 0x12, 0x72, 0x09, 0x32, 0x54, 0x71, 0x71, 0x57, 0x47);
> +
> +	/* 5.19.3 SETDISP: Set display related register (B2h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETDISP,
> +			       0x00, 0x80, 0x64, 0x2c, 0x16, 0x2f);
> +
> +	/* 5.19.4 SETCYC: Set display waveform cycles (B4h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETCYC,
> +			       0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c, 0x86, 0x75,
> +			       0x00, 0x3f, 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c,
> +			       0x86);
> +
> +	/* 5.19.5 SETVCOM: Set VCOM voltage (B6h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETVCOM,
> +			       0x6e, 0x6e);
> +
> +	/* 5.19.19 SETGIP0: Set GIP Option0 (D3h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP0,
> +			       0x00, 0x00, 0x07, 0x07, 0x40, 0x07, 0x0c, 0x00, 0x08, 0x10,
> +			       0x08, 0x00, 0x08, 0x54, 0x15, 0x0a, 0x05, 0x0a, 0x02, 0x15,
> +			       0x06, 0x05, 0x06, 0x47, 0x44, 0x0a, 0x0a, 0x4b, 0x10, 0x07,
> +			       0x07, 0x0c, 0x40);
> +
> +	/* 5.19.20 Set GIP Option1 (D5h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP1,
> +			       0x1c, 0x1c, 0x1d, 0x1d, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
> +			       0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x24, 0x25, 0x18, 0x18,
> +			       0x26, 0x27, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> +			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x20, 0x21,
> +			       0x18, 0x18, 0x18, 0x18);
> +
> +	/* 5.19.21 Set GIP Option2 (D6h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP2,
> +			       0x1c, 0x1c, 0x1d, 0x1d, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02,
> +			       0x01, 0x00, 0x0b, 0x0a, 0x09, 0x08, 0x21, 0x20, 0x18, 0x18,
> +			       0x27, 0x26, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> +			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x25, 0x24,
> +			       0x18, 0x18, 0x18, 0x18);
> +
> +	/* 5.19.25 SETGAMMA: Set gamma curve related setting (E0h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGAMMA,
> +			       0x00, 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56,
> +			       0x65, 0x66, 0x6e, 0x82, 0x88, 0x8b, 0x9a, 0x9d, 0x98, 0xa8,
> +			       0xb9, 0x5d, 0x5c, 0x61, 0x66, 0x6a, 0x6f, 0x7f, 0x7f, 0x00,
> +			       0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56, 0x65,
> +			       0x65, 0x6e, 0x81, 0x87, 0x8b, 0x98, 0x9d, 0x99, 0xa8, 0xba,
> +			       0x5d, 0x5d, 0x62, 0x67, 0x6b, 0x72, 0x7f, 0x7f);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN1,
> +			       0x1f, 0x31);
> +
> +	/* 5.19.17 SETPANEL (CCh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPANEL,
> +			       0x0b);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN3,
> +			       0x02);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x02);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN4,
> +			       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
> +			       0xff, 0xff);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x00);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x01);
> +
> +	/* 5.19.2 SETPOWER: Set power (B1h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
> +			       0x00);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x00);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN5,
> +			       0x40, 0x81, 0x50, 0x00, 0x1a, 0xfc, 0x01);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN2,
> +			       0xed);
> +
> +	return 0;
> +}
> +
> +static const struct drm_display_mode powkiddy_x55_mode = {
> +	.hdisplay	= 720,
> +	.hsync_start	= 720 + 44,
> +	.hsync_end	= 720 + 44 + 20,
> +	.htotal		= 720 + 44 + 20 + 20,
> +	.vdisplay	= 1280,
> +	.vsync_start	= 1280 + 12,
> +	.vsync_end	= 1280 + 12 + 10,
> +	.vtotal		= 1280 + 12 + 10 + 10,
> +	.clock		= 63290,
> +	.flags		= DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> +	.width_mm	= 67,
> +	.height_mm	= 121,
> +};
> +
> +static const struct hx8394_panel_desc powkiddy_x55_desc = {
> +	.mode = &powkiddy_x55_mode,
> +	.lanes = 4,
> +	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> +		      MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET,
> +	.format = MIPI_DSI_FMT_RGB888,
> +	.init_sequence = powkiddy_x55_init_sequence,
> +};
> +
>   static int hx8394_enable(struct drm_panel *panel)
>   {
>   	struct hx8394 *ctx = panel_to_hx8394(panel);
> @@ -419,6 +555,7 @@ static void hx8394_remove(struct mipi_dsi_device *dsi)
>   
>   static const struct of_device_id hx8394_of_match[] = {
>   	{ .compatible = "hannstar,hsd060bhw4", .data = &hsd060bhw4_desc },
> +	{ .compatible = "powkiddy,x55-panel", .data = &powkiddy_x55_desc },
>   	{ /* sentinel */ }
>   };
>   MODULE_DEVICE_TABLE(of, hx8394_of_match);

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH V2 06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel

[neil.armstrong]

On 04/12/2023 19:57, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the Powkiddy X55 panel as used on the Powkiddy X55
> handheld gaming console. This panel uses a Himax HX8394 display
> controller and requires a vendor provided init sequence. The display
> resolution is 720x1280 and is 67mm by 121mm as measured with calipers.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx8394.c | 137 +++++++++++++++++++++
>   1 file changed, 137 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> index b68ea09f4725..ff0dc08b9829 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> @@ -38,6 +38,7 @@
>   #define HX8394_CMD_SETMIPI	  0xba
>   #define HX8394_CMD_SETOTP	  0xbb
>   #define HX8394_CMD_SETREGBANK	  0xbd
> +#define HX8394_CMD_UNKNOWN5	  0xbf
>   #define HX8394_CMD_UNKNOWN1	  0xc0
>   #define HX8394_CMD_SETDGCLUT	  0xc1
>   #define HX8394_CMD_SETID	  0xc3
> @@ -52,6 +53,7 @@
>   #define HX8394_CMD_SETGIP1	  0xd5
>   #define HX8394_CMD_SETGIP2	  0xd6
>   #define HX8394_CMD_SETGPO	  0xd6
> +#define HX8394_CMD_UNKNOWN4	  0xd8
>   #define HX8394_CMD_SETSCALING	  0xdd
>   #define HX8394_CMD_SETIDLE	  0xdf
>   #define HX8394_CMD_SETGAMMA	  0xe0
> @@ -203,6 +205,140 @@ static const struct hx8394_panel_desc hsd060bhw4_desc = {
>   	.init_sequence = hsd060bhw4_init_sequence,
>   };
>   
> +static int powkiddy_x55_init_sequence(struct hx8394 *ctx)
> +{
> +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> +
> +	/* 5.19.8 SETEXTC: Set extension command (B9h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETEXTC,
> +			       0xff, 0x83, 0x94);
> +
> +	/* 5.19.9 SETMIPI: Set MIPI control (BAh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETMIPI,
> +			       0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0);
> +
> +	/* 5.19.2 SETPOWER: Set power (B1h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
> +			       0x48, 0x12, 0x72, 0x09, 0x32, 0x54, 0x71, 0x71, 0x57, 0x47);
> +
> +	/* 5.19.3 SETDISP: Set display related register (B2h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETDISP,
> +			       0x00, 0x80, 0x64, 0x2c, 0x16, 0x2f);
> +
> +	/* 5.19.4 SETCYC: Set display waveform cycles (B4h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETCYC,
> +			       0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c, 0x86, 0x75,
> +			       0x00, 0x3f, 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c,
> +			       0x86);
> +
> +	/* 5.19.5 SETVCOM: Set VCOM voltage (B6h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETVCOM,
> +			       0x6e, 0x6e);
> +
> +	/* 5.19.19 SETGIP0: Set GIP Option0 (D3h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP0,
> +			       0x00, 0x00, 0x07, 0x07, 0x40, 0x07, 0x0c, 0x00, 0x08, 0x10,
> +			       0x08, 0x00, 0x08, 0x54, 0x15, 0x0a, 0x05, 0x0a, 0x02, 0x15,
> +			       0x06, 0x05, 0x06, 0x47, 0x44, 0x0a, 0x0a, 0x4b, 0x10, 0x07,
> +			       0x07, 0x0c, 0x40);
> +
> +	/* 5.19.20 Set GIP Option1 (D5h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP1,
> +			       0x1c, 0x1c, 0x1d, 0x1d, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
> +			       0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x24, 0x25, 0x18, 0x18,
> +			       0x26, 0x27, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> +			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x20, 0x21,
> +			       0x18, 0x18, 0x18, 0x18);
> +
> +	/* 5.19.21 Set GIP Option2 (D6h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP2,
> +			       0x1c, 0x1c, 0x1d, 0x1d, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02,
> +			       0x01, 0x00, 0x0b, 0x0a, 0x09, 0x08, 0x21, 0x20, 0x18, 0x18,
> +			       0x27, 0x26, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> +			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x25, 0x24,
> +			       0x18, 0x18, 0x18, 0x18);
> +
> +	/* 5.19.25 SETGAMMA: Set gamma curve related setting (E0h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGAMMA,
> +			       0x00, 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56,
> +			       0x65, 0x66, 0x6e, 0x82, 0x88, 0x8b, 0x9a, 0x9d, 0x98, 0xa8,
> +			       0xb9, 0x5d, 0x5c, 0x61, 0x66, 0x6a, 0x6f, 0x7f, 0x7f, 0x00,
> +			       0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56, 0x65,
> +			       0x65, 0x6e, 0x81, 0x87, 0x8b, 0x98, 0x9d, 0x99, 0xa8, 0xba,
> +			       0x5d, 0x5d, 0x62, 0x67, 0x6b, 0x72, 0x7f, 0x7f);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN1,
> +			       0x1f, 0x31);
> +
> +	/* 5.19.17 SETPANEL (CCh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPANEL,
> +			       0x0b);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN3,
> +			       0x02);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x02);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN4,
> +			       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
> +			       0xff, 0xff);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x00);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x01);
> +
> +	/* 5.19.2 SETPOWER: Set power (B1h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
> +			       0x00);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x00);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN5,
> +			       0x40, 0x81, 0x50, 0x00, 0x1a, 0xfc, 0x01);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN2,
> +			       0xed);
> +
> +	return 0;
> +}
> +
> +static const struct drm_display_mode powkiddy_x55_mode = {
> +	.hdisplay	= 720,
> +	.hsync_start	= 720 + 44,
> +	.hsync_end	= 720 + 44 + 20,
> +	.htotal		= 720 + 44 + 20 + 20,
> +	.vdisplay	= 1280,
> +	.vsync_start	= 1280 + 12,
> +	.vsync_end	= 1280 + 12 + 10,
> +	.vtotal		= 1280 + 12 + 10 + 10,
> +	.clock		= 63290,
> +	.flags		= DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> +	.width_mm	= 67,
> +	.height_mm	= 121,
> +};
> +
> +static const struct hx8394_panel_desc powkiddy_x55_desc = {
> +	.mode = &powkiddy_x55_mode,
> +	.lanes = 4,
> +	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> +		      MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET,
> +	.format = MIPI_DSI_FMT_RGB888,
> +	.init_sequence = powkiddy_x55_init_sequence,
> +};
> +
>   static int hx8394_enable(struct drm_panel *panel)
>   {
>   	struct hx8394 *ctx = panel_to_hx8394(panel);
> @@ -419,6 +555,7 @@ static void hx8394_remove(struct mipi_dsi_device *dsi)
>   
>   static const struct of_device_id hx8394_of_match[] = {
>   	{ .compatible = "hannstar,hsd060bhw4", .data = &hsd060bhw4_desc },
> +	{ .compatible = "powkiddy,x55-panel", .data = &powkiddy_x55_desc },
>   	{ /* sentinel */ }
>   };
>   MODULE_DEVICE_TABLE(of, hx8394_of_match);

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH V2 07/10] clk: rockchip: Mark pclk_usb as critical on rk3568

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

In the reference manual under "2.8.6 NIU Clock gating reliance"
it is stated that pclk_usb_niu has a dependency on hclk_usb_niu.

While the manual does not state that this is a bi-directional
relationship it was noted that the sdmmc2 failed to operate for me in
mmc mode if the pclk_usb was not marked as critical. The parent clock
of the hclk_sdmmc2 is hclk_usb.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/clk/rockchip/clk-rk3568.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index bfbcbb744327..c4fa2375dbfb 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -1595,6 +1595,7 @@ static const char *const rk3568_cru_critical_clocks[] __initconst = {
 	"pclk_php",
 	"hclk_usb",
 	"hclk_vo",
+	"pclk_usb",
 };
 
 static const char *const rk3568_pmucru_critical_clocks[] __initconst = {
-- 
2.34.1

[PATCH V2 07/10] clk: rockchip: Mark pclk_usb as critical on rk3568

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

In the reference manual under "2.8.6 NIU Clock gating reliance"
it is stated that pclk_usb_niu has a dependency on hclk_usb_niu.

While the manual does not state that this is a bi-directional
relationship it was noted that the sdmmc2 failed to operate for me in
mmc mode if the pclk_usb was not marked as critical. The parent clock
of the hclk_sdmmc2 is hclk_usb.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/clk/rockchip/clk-rk3568.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index bfbcbb744327..c4fa2375dbfb 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -1595,6 +1595,7 @@ static const char *const rk3568_cru_critical_clocks[] __initconst = {
 	"pclk_php",
 	"hclk_usb",
 	"hclk_vo",
+	"pclk_usb",
 };
 
 static const char *const rk3568_pmucru_critical_clocks[] __initconst = {
-- 
2.34.1

[PATCH V2 07/10] clk: rockchip: Mark pclk_usb as critical on rk3568

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

In the reference manual under "2.8.6 NIU Clock gating reliance"
it is stated that pclk_usb_niu has a dependency on hclk_usb_niu.

While the manual does not state that this is a bi-directional
relationship it was noted that the sdmmc2 failed to operate for me in
mmc mode if the pclk_usb was not marked as critical. The parent clock
of the hclk_sdmmc2 is hclk_usb.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/clk/rockchip/clk-rk3568.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index bfbcbb744327..c4fa2375dbfb 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -1595,6 +1595,7 @@ static const char *const rk3568_cru_critical_clocks[] __initconst = {
 	"pclk_php",
 	"hclk_usb",
 	"hclk_vo",
+	"pclk_usb",
 };
 
 static const char *const rk3568_pmucru_critical_clocks[] __initconst = {
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH V2 08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for a PLL rate of 126.4MHz so that the Powkiddy X55 panel
can run at a requested 60hz.

I have confirmed this rate fits with all the constraints
listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter
2 Clock & Reset Unit (CRU)."

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/clk/rockchip/clk-rk3568.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index c4fa2375dbfb..fa408fedf625 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -78,6 +78,7 @@ static struct rockchip_pll_rate_table rk3568_pll_rates[] = {
 	RK3036_PLL_RATE(200000000, 1, 100, 3, 4, 1, 0),
 	RK3036_PLL_RATE(148500000, 1, 99, 4, 4, 1, 0),
 	RK3036_PLL_RATE(135000000, 2, 45, 4, 1, 1, 0),
+	RK3036_PLL_RATE(126400000, 1, 79, 5, 3, 1, 0),
 	RK3036_PLL_RATE(119000000, 3, 119, 4, 2, 1, 0),
 	RK3036_PLL_RATE(115200000, 1, 24, 5, 1, 1, 0),
 	RK3036_PLL_RATE(108000000, 2, 45, 5, 1, 1, 0),
-- 
2.34.1

[PATCH V2 08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for a PLL rate of 126.4MHz so that the Powkiddy X55 panel
can run at a requested 60hz.

I have confirmed this rate fits with all the constraints
listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter
2 Clock & Reset Unit (CRU)."

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/clk/rockchip/clk-rk3568.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index c4fa2375dbfb..fa408fedf625 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -78,6 +78,7 @@ static struct rockchip_pll_rate_table rk3568_pll_rates[] = {
 	RK3036_PLL_RATE(200000000, 1, 100, 3, 4, 1, 0),
 	RK3036_PLL_RATE(148500000, 1, 99, 4, 4, 1, 0),
 	RK3036_PLL_RATE(135000000, 2, 45, 4, 1, 1, 0),
+	RK3036_PLL_RATE(126400000, 1, 79, 5, 3, 1, 0),
 	RK3036_PLL_RATE(119000000, 3, 119, 4, 2, 1, 0),
 	RK3036_PLL_RATE(115200000, 1, 24, 5, 1, 1, 0),
 	RK3036_PLL_RATE(108000000, 2, 45, 5, 1, 1, 0),
-- 
2.34.1

[PATCH V2 08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for a PLL rate of 126.4MHz so that the Powkiddy X55 panel
can run at a requested 60hz.

I have confirmed this rate fits with all the constraints
listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter
2 Clock & Reset Unit (CRU)."

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/clk/rockchip/clk-rk3568.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index c4fa2375dbfb..fa408fedf625 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -78,6 +78,7 @@ static struct rockchip_pll_rate_table rk3568_pll_rates[] = {
 	RK3036_PLL_RATE(200000000, 1, 100, 3, 4, 1, 0),
 	RK3036_PLL_RATE(148500000, 1, 99, 4, 4, 1, 0),
 	RK3036_PLL_RATE(135000000, 2, 45, 4, 1, 1, 0),
+	RK3036_PLL_RATE(126400000, 1, 79, 5, 3, 1, 0),
 	RK3036_PLL_RATE(119000000, 3, 119, 4, 2, 1, 0),
 	RK3036_PLL_RATE(115200000, 1, 24, 5, 1, 1, 0),
 	RK3036_PLL_RATE(108000000, 2, 45, 5, 1, 1, 0),
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH V2 09/10] dt-bindings: arm: rockchip: Add Powkiddy X55

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

The Powkiddy RK2023 is a handheld gaming device made by Powkiddy and
powered by the Rockchip RK3566 SoC. This device is somewhat similar
to the existing Powkiddy RK3566 devices, which have been grouped
together with a previous commit[1].

[1] https://lore.kernel.org/linux-rockchip/20231117202536.1387815-1-macroalpha82@gmail.com/T/#m4764997cfafaca22fe677200de96caa5fb8f0005

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 021a0e95ba62..5e22f247ee6e 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -681,6 +681,7 @@ properties:
           - enum:
               - powkiddy,rgb30
               - powkiddy,rk2023
+              - powkiddy,x55
           - const: rockchip,rk3566
 
       - description: Radxa Compute Module 3(CM3)
-- 
2.34.1

[PATCH V2 09/10] dt-bindings: arm: rockchip: Add Powkiddy X55

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

The Powkiddy RK2023 is a handheld gaming device made by Powkiddy and
powered by the Rockchip RK3566 SoC. This device is somewhat similar
to the existing Powkiddy RK3566 devices, which have been grouped
together with a previous commit[1].

[1] https://lore.kernel.org/linux-rockchip/20231117202536.1387815-1-macroalpha82@gmail.com/T/#m4764997cfafaca22fe677200de96caa5fb8f0005

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 021a0e95ba62..5e22f247ee6e 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -681,6 +681,7 @@ properties:
           - enum:
               - powkiddy,rgb30
               - powkiddy,rk2023
+              - powkiddy,x55
           - const: rockchip,rk3566
 
       - description: Radxa Compute Module 3(CM3)
-- 
2.34.1

[PATCH V2 09/10] dt-bindings: arm: rockchip: Add Powkiddy X55

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

The Powkiddy RK2023 is a handheld gaming device made by Powkiddy and
powered by the Rockchip RK3566 SoC. This device is somewhat similar
to the existing Powkiddy RK3566 devices, which have been grouped
together with a previous commit[1].

[1] https://lore.kernel.org/linux-rockchip/20231117202536.1387815-1-macroalpha82@gmail.com/T/#m4764997cfafaca22fe677200de96caa5fb8f0005

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 021a0e95ba62..5e22f247ee6e 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -681,6 +681,7 @@ properties:
           - enum:
               - powkiddy,rgb30
               - powkiddy,rk2023
+              - powkiddy,x55
           - const: rockchip,rk3566
 
       - description: Radxa Compute Module 3(CM3)
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH V2 10/10] arm64: dts: rockchip: Add Powkiddy X55

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for the Powkiddy X55. The Powkiddy RK2023 is a handheld
gaming device with a 720p 5.5 inch screen powered by the Rockchip
RK3566 SoC. It includes a Realtek 8821cs WiFi/BT module, 2 ADC
joysticks powered by 4 dedicated ADC channels, and several GPIO
face buttons. There are 2 SDMMC slots (sdmmc1 and sdmmc3), and an
8GB internal eMMC.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3566-powkiddy-x55.dts | 926 ++++++++++++++++++
 2 files changed, 927 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 9dcb65f76342..a1a06e33a299 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-x55.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts
new file mode 100644
index 000000000000..4786b19fd017
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts
@@ -0,0 +1,926 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Powkiddy x55";
+	compatible = "powkiddy,x55", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc2;
+		mmc3 = &sdmmc1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc_joystick: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 0>, <&saradc 1>,
+			      <&saradc 2>, <&saradc 3>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <4000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4300000>;
+		factory-internal-resistance-micro-ohms = <91000>;
+		voltage-max-design-microvolt = <4138000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4138000 100>, <4083000 95>, <4059000 90>, <4044000 85>,
+					<4030000 80>, <4020000 75>, <4006000 70>, <3972000 65>,
+					<3934000 60>, <3904000 55>, <3878000 50>, <3857000 45>,
+					<3843000 40>, <3826000 35>, <3801000 30>, <3768000 25>,
+					<3735000 20>, <3688000 15>, <3621000 10>, <3553000 5>,
+					<3400000 0>;
+	};
+
+	gpio_keys_control: gpio-keys-control {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&btn_pins_ctrl>;
+		pinctrl-names = "default";
+
+		button-a {
+			gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
+			label = "EAST";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+			label = "SOUTH";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
+			label = "TL";
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>;
+			label = "TL2";
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-right {
+			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-select {
+			gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-start {
+			gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "START";
+			linux,code = <BTN_START>;
+		};
+
+		button-thumbl {
+			gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "THUMBL";
+			linux,code = <BTN_THUMBL>;
+		};
+
+		button-thumbr {
+			gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+			label = "THUMBR";
+			linux,code = <BTN_THUMBR>;
+		};
+
+		button-r1 {
+			gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
+			label = "TR";
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>;
+			label = "TR2";
+			linux,code = <BTN_TR2>;
+		};
+
+		button-up {
+			gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
+			label = "NORTH";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+			label = "WEST";
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-voldown {
+			gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		red_led: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		green_led: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+		};
+
+		amber_led: led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CHARGING;
+		};
+
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c5>;
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-0 = <&hp_det>;
+		pinctrl-names = "default";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_host_en>;
+		pinctrl-names = "default";
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&dcdc_boost>;
+	};
+
+	vcc_lcd: regulator-vcc-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_lcd_en>;
+		pinctrl-names = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_lcd";
+	};
+
+	vcc_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc_sys";
+	};
+
+	vcc_wifi: regulator-vcc-wifi {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&vcc_wifi_h>;
+		pinctrl-names = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_wifi";
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <126400000>;
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel: panel@0 {
+		compatible = "powkiddy,x55-panel", "himax,hx8394";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+		vcc-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-0 = <&hdmitxm0_cec>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-min-microvolt = <4700000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		rk817_charger: charger {
+			monitored-battery = <&battery>;
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <150000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+
+	};
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx>, <&i2s1m0_lrcktx>, <&i2s1m0_sdi0>,
+		    <&i2s1m0_sdo0>;
+	pinctrl-names = "default";
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-control {
+		btn_pins_ctrl: btn-pins-ctrl {
+			rockchip,pins =
+				<3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins =
+				<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-lcd {
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-leds {
+		led_pins: led-pins {
+			rockchip,pins =
+				<4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hp-detect {
+		hp_det: hp-det {
+			rockchip,pins =
+				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins =
+				<4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vcc-lcd {
+		vcc_lcd_en: vcc-lcd-en {
+			rockchip,pins =
+				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc-wifi {
+		vcc_wifi_h: vcc-wifi-h {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcca1v8_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcca1v8_pmu>;
+	vccio5-supply = <&vcc2v8_dvp>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
+		    <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>, <&sdmmc0_cmd>,
+		    <&sdmmc0_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_cmd>, <&sdmmc1_clk>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc2m1_bus4>, <&sdmmc2m1_cmd>, <&sdmmc2m1_clk>,
+		    <&sdmmc2m1_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcc2v8_dvp>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m0_xfer>, <&uart1m0_ctsn>, <&uart1m0_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
-- 
2.34.1

[PATCH V2 10/10] arm64: dts: rockchip: Add Powkiddy X55

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for the Powkiddy X55. The Powkiddy RK2023 is a handheld
gaming device with a 720p 5.5 inch screen powered by the Rockchip
RK3566 SoC. It includes a Realtek 8821cs WiFi/BT module, 2 ADC
joysticks powered by 4 dedicated ADC channels, and several GPIO
face buttons. There are 2 SDMMC slots (sdmmc1 and sdmmc3), and an
8GB internal eMMC.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3566-powkiddy-x55.dts | 926 ++++++++++++++++++
 2 files changed, 927 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 9dcb65f76342..a1a06e33a299 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-x55.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts
new file mode 100644
index 000000000000..4786b19fd017
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts
@@ -0,0 +1,926 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Powkiddy x55";
+	compatible = "powkiddy,x55", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc2;
+		mmc3 = &sdmmc1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc_joystick: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 0>, <&saradc 1>,
+			      <&saradc 2>, <&saradc 3>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <4000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4300000>;
+		factory-internal-resistance-micro-ohms = <91000>;
+		voltage-max-design-microvolt = <4138000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4138000 100>, <4083000 95>, <4059000 90>, <4044000 85>,
+					<4030000 80>, <4020000 75>, <4006000 70>, <3972000 65>,
+					<3934000 60>, <3904000 55>, <3878000 50>, <3857000 45>,
+					<3843000 40>, <3826000 35>, <3801000 30>, <3768000 25>,
+					<3735000 20>, <3688000 15>, <3621000 10>, <3553000 5>,
+					<3400000 0>;
+	};
+
+	gpio_keys_control: gpio-keys-control {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&btn_pins_ctrl>;
+		pinctrl-names = "default";
+
+		button-a {
+			gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
+			label = "EAST";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+			label = "SOUTH";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
+			label = "TL";
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>;
+			label = "TL2";
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-right {
+			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-select {
+			gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-start {
+			gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "START";
+			linux,code = <BTN_START>;
+		};
+
+		button-thumbl {
+			gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "THUMBL";
+			linux,code = <BTN_THUMBL>;
+		};
+
+		button-thumbr {
+			gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+			label = "THUMBR";
+			linux,code = <BTN_THUMBR>;
+		};
+
+		button-r1 {
+			gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
+			label = "TR";
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>;
+			label = "TR2";
+			linux,code = <BTN_TR2>;
+		};
+
+		button-up {
+			gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
+			label = "NORTH";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+			label = "WEST";
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-voldown {
+			gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		red_led: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		green_led: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+		};
+
+		amber_led: led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CHARGING;
+		};
+
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c5>;
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-0 = <&hp_det>;
+		pinctrl-names = "default";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_host_en>;
+		pinctrl-names = "default";
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&dcdc_boost>;
+	};
+
+	vcc_lcd: regulator-vcc-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_lcd_en>;
+		pinctrl-names = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_lcd";
+	};
+
+	vcc_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc_sys";
+	};
+
+	vcc_wifi: regulator-vcc-wifi {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&vcc_wifi_h>;
+		pinctrl-names = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_wifi";
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <126400000>;
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel: panel@0 {
+		compatible = "powkiddy,x55-panel", "himax,hx8394";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+		vcc-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-0 = <&hdmitxm0_cec>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-min-microvolt = <4700000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		rk817_charger: charger {
+			monitored-battery = <&battery>;
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <150000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+
+	};
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx>, <&i2s1m0_lrcktx>, <&i2s1m0_sdi0>,
+		    <&i2s1m0_sdo0>;
+	pinctrl-names = "default";
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-control {
+		btn_pins_ctrl: btn-pins-ctrl {
+			rockchip,pins =
+				<3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins =
+				<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-lcd {
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-leds {
+		led_pins: led-pins {
+			rockchip,pins =
+				<4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hp-detect {
+		hp_det: hp-det {
+			rockchip,pins =
+				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins =
+				<4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vcc-lcd {
+		vcc_lcd_en: vcc-lcd-en {
+			rockchip,pins =
+				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc-wifi {
+		vcc_wifi_h: vcc-wifi-h {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcca1v8_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcca1v8_pmu>;
+	vccio5-supply = <&vcc2v8_dvp>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
+		    <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>, <&sdmmc0_cmd>,
+		    <&sdmmc0_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_cmd>, <&sdmmc1_clk>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc2m1_bus4>, <&sdmmc2m1_cmd>, <&sdmmc2m1_clk>,
+		    <&sdmmc2m1_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcc2v8_dvp>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m0_xfer>, <&uart1m0_ctsn>, <&uart1m0_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
-- 
2.34.1

[PATCH V2 10/10] arm64: dts: rockchip: Add Powkiddy X55

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for the Powkiddy X55. The Powkiddy RK2023 is a handheld
gaming device with a 720p 5.5 inch screen powered by the Rockchip
RK3566 SoC. It includes a Realtek 8821cs WiFi/BT module, 2 ADC
joysticks powered by 4 dedicated ADC channels, and several GPIO
face buttons. There are 2 SDMMC slots (sdmmc1 and sdmmc3), and an
8GB internal eMMC.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3566-powkiddy-x55.dts | 926 ++++++++++++++++++
 2 files changed, 927 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 9dcb65f76342..a1a06e33a299 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-x55.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts
new file mode 100644
index 000000000000..4786b19fd017
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts
@@ -0,0 +1,926 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Powkiddy x55";
+	compatible = "powkiddy,x55", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc2;
+		mmc3 = &sdmmc1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc_joystick: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 0>, <&saradc 1>,
+			      <&saradc 2>, <&saradc 3>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <4000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4300000>;
+		factory-internal-resistance-micro-ohms = <91000>;
+		voltage-max-design-microvolt = <4138000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4138000 100>, <4083000 95>, <4059000 90>, <4044000 85>,
+					<4030000 80>, <4020000 75>, <4006000 70>, <3972000 65>,
+					<3934000 60>, <3904000 55>, <3878000 50>, <3857000 45>,
+					<3843000 40>, <3826000 35>, <3801000 30>, <3768000 25>,
+					<3735000 20>, <3688000 15>, <3621000 10>, <3553000 5>,
+					<3400000 0>;
+	};
+
+	gpio_keys_control: gpio-keys-control {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&btn_pins_ctrl>;
+		pinctrl-names = "default";
+
+		button-a {
+			gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
+			label = "EAST";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+			label = "SOUTH";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
+			label = "TL";
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>;
+			label = "TL2";
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-right {
+			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-select {
+			gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-start {
+			gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "START";
+			linux,code = <BTN_START>;
+		};
+
+		button-thumbl {
+			gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "THUMBL";
+			linux,code = <BTN_THUMBL>;
+		};
+
+		button-thumbr {
+			gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+			label = "THUMBR";
+			linux,code = <BTN_THUMBR>;
+		};
+
+		button-r1 {
+			gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
+			label = "TR";
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>;
+			label = "TR2";
+			linux,code = <BTN_TR2>;
+		};
+
+		button-up {
+			gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
+			label = "NORTH";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+			label = "WEST";
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-voldown {
+			gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		red_led: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		green_led: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+		};
+
+		amber_led: led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CHARGING;
+		};
+
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c5>;
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-0 = <&hp_det>;
+		pinctrl-names = "default";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_host_en>;
+		pinctrl-names = "default";
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&dcdc_boost>;
+	};
+
+	vcc_lcd: regulator-vcc-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_lcd_en>;
+		pinctrl-names = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_lcd";
+	};
+
+	vcc_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc_sys";
+	};
+
+	vcc_wifi: regulator-vcc-wifi {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&vcc_wifi_h>;
+		pinctrl-names = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_wifi";
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <126400000>;
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel: panel@0 {
+		compatible = "powkiddy,x55-panel", "himax,hx8394";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+		vcc-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-0 = <&hdmitxm0_cec>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-min-microvolt = <4700000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		rk817_charger: charger {
+			monitored-battery = <&battery>;
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <150000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+
+	};
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx>, <&i2s1m0_lrcktx>, <&i2s1m0_sdi0>,
+		    <&i2s1m0_sdo0>;
+	pinctrl-names = "default";
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-control {
+		btn_pins_ctrl: btn-pins-ctrl {
+			rockchip,pins =
+				<3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins =
+				<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-lcd {
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-leds {
+		led_pins: led-pins {
+			rockchip,pins =
+				<4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hp-detect {
+		hp_det: hp-det {
+			rockchip,pins =
+				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins =
+				<4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vcc-lcd {
+		vcc_lcd_en: vcc-lcd-en {
+			rockchip,pins =
+				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc-wifi {
+		vcc_wifi_h: vcc-wifi-h {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcca1v8_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcca1v8_pmu>;
+	vccio5-supply = <&vcc2v8_dvp>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
+		    <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>, <&sdmmc0_cmd>,
+		    <&sdmmc0_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_cmd>, <&sdmmc1_clk>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc2m1_bus4>, <&sdmmc2m1_cmd>, <&sdmmc2m1_clk>,
+		    <&sdmmc2m1_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcc2v8_dvp>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m0_xfer>, <&uart1m0_ctsn>, <&uart1m0_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH V2 00/10] rockchip: Add Powkiddy X55

[Neil Armstrong]

Hi,

On Mon, 04 Dec 2023 12:57:09 -0600, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
> console.
> 
> Changes since V1:
>  - Corrected a bug with the DRM mode flags for the video driver.
>  - Adjusted panel front and back porch and pixel clock to fix
>    issues with display that occurred after correcting DRM mode
>    flag bug.
>  - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.
> 
> [...]

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)

[01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=8c2c5d1d33f0725b7995f44f87a81311d13a441d
[02/10] drm/panel: himax-hx8394: Drop shutdown logic
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e4f53a4d921eba6187a2599cf184a3beeb604fe2
[03/10] dt-bindings: display: Document Himax HX8394 panel rotation
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=be478bc7ab08127473ce9ed893378cc2a8762611
[04/10] drm/panel: himax-hx8394: Add Panel Rotation Support
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=a695a5009c8fd239a98d98209489997ff5397d2b
[05/10] dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=00830a0d8f0d820335e7beb26e251069d90f2574
[06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=38db985966d2f0f89f7e1891253489a16936fc5e
[07/10] clk: rockchip: Mark pclk_usb as critical on rk3568
        (no commit info)
[08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz
        (no commit info)
[09/10] dt-bindings: arm: rockchip: Add Powkiddy X55
        (no commit info)
[10/10] arm64: dts: rockchip: Add Powkiddy X55
        (no commit info)

-- 
Neil

Re: [PATCH V2 00/10] rockchip: Add Powkiddy X55

[Neil Armstrong]

Hi,

On Mon, 04 Dec 2023 12:57:09 -0600, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
> console.
> 
> Changes since V1:
>  - Corrected a bug with the DRM mode flags for the video driver.
>  - Adjusted panel front and back porch and pixel clock to fix
>    issues with display that occurred after correcting DRM mode
>    flag bug.
>  - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.
> 
> [...]

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)

[01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=8c2c5d1d33f0725b7995f44f87a81311d13a441d
[02/10] drm/panel: himax-hx8394: Drop shutdown logic
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e4f53a4d921eba6187a2599cf184a3beeb604fe2
[03/10] dt-bindings: display: Document Himax HX8394 panel rotation
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=be478bc7ab08127473ce9ed893378cc2a8762611
[04/10] drm/panel: himax-hx8394: Add Panel Rotation Support
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=a695a5009c8fd239a98d98209489997ff5397d2b
[05/10] dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=00830a0d8f0d820335e7beb26e251069d90f2574
[06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=38db985966d2f0f89f7e1891253489a16936fc5e
[07/10] clk: rockchip: Mark pclk_usb as critical on rk3568
        (no commit info)
[08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz
        (no commit info)
[09/10] dt-bindings: arm: rockchip: Add Powkiddy X55
        (no commit info)
[10/10] arm64: dts: rockchip: Add Powkiddy X55
        (no commit info)

-- 
Neil

Re: [PATCH V2 00/10] rockchip: Add Powkiddy X55

[Neil Armstrong]

Hi,

On Mon, 04 Dec 2023 12:57:09 -0600, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
> console.
> 
> Changes since V1:
>  - Corrected a bug with the DRM mode flags for the video driver.
>  - Adjusted panel front and back porch and pixel clock to fix
>    issues with display that occurred after correcting DRM mode
>    flag bug.
>  - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.
> 
> [...]

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)

[01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=8c2c5d1d33f0725b7995f44f87a81311d13a441d
[02/10] drm/panel: himax-hx8394: Drop shutdown logic
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e4f53a4d921eba6187a2599cf184a3beeb604fe2
[03/10] dt-bindings: display: Document Himax HX8394 panel rotation
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=be478bc7ab08127473ce9ed893378cc2a8762611
[04/10] drm/panel: himax-hx8394: Add Panel Rotation Support
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=a695a5009c8fd239a98d98209489997ff5397d2b
[05/10] dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=00830a0d8f0d820335e7beb26e251069d90f2574
[06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=38db985966d2f0f89f7e1891253489a16936fc5e
[07/10] clk: rockchip: Mark pclk_usb as critical on rk3568
        (no commit info)
[08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz
        (no commit info)
[09/10] dt-bindings: arm: rockchip: Add Powkiddy X55
        (no commit info)
[10/10] arm64: dts: rockchip: Add Powkiddy X55
        (no commit info)

-- 
Neil


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH V2 00/10] rockchip: Add Powkiddy X55

[Neil Armstrong]

On 05/12/2023 09:26, Neil Armstrong wrote:
> Hi,
> 
> On Mon, 04 Dec 2023 12:57:09 -0600, Chris Morgan wrote:
>> From: Chris Morgan <macromorgan@hotmail.com>
>>
>> Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
>> console.
>>
>> Changes since V1:
>>   - Corrected a bug with the DRM mode flags for the video driver.
>>   - Adjusted panel front and back porch and pixel clock to fix
>>     issues with display that occurred after correcting DRM mode
>>     flag bug.
>>   - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.
>>
>> [...]
> 
> Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
> 
> [01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=8c2c5d1d33f0725b7995f44f87a81311d13a441d
> [02/10] drm/panel: himax-hx8394: Drop shutdown logic
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e4f53a4d921eba6187a2599cf184a3beeb604fe2
> [03/10] dt-bindings: display: Document Himax HX8394 panel rotation
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=be478bc7ab08127473ce9ed893378cc2a8762611
> [04/10] drm/panel: himax-hx8394: Add Panel Rotation Support
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=a695a5009c8fd239a98d98209489997ff5397d2b
> [05/10] dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=00830a0d8f0d820335e7beb26e251069d90f2574
> [06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=38db985966d2f0f89f7e1891253489a16936fc5e
> [07/10] clk: rockchip: Mark pclk_usb as critical on rk3568
>          (no commit info)
> [08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz
>          (no commit info)
> [09/10] dt-bindings: arm: rockchip: Add Powkiddy X55
>          (no commit info)
> [10/10] arm64: dts: rockchip: Add Powkiddy X55
>          (no commit info)
> 

To clarify, only patches 1 to 6 were applied to drm-misc-next,

Thanks,
Neil

Re: [PATCH V2 00/10] rockchip: Add Powkiddy X55

[Neil Armstrong]

On 05/12/2023 09:26, Neil Armstrong wrote:
> Hi,
> 
> On Mon, 04 Dec 2023 12:57:09 -0600, Chris Morgan wrote:
>> From: Chris Morgan <macromorgan@hotmail.com>
>>
>> Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
>> console.
>>
>> Changes since V1:
>>   - Corrected a bug with the DRM mode flags for the video driver.
>>   - Adjusted panel front and back porch and pixel clock to fix
>>     issues with display that occurred after correcting DRM mode
>>     flag bug.
>>   - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.
>>
>> [...]
> 
> Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
> 
> [01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=8c2c5d1d33f0725b7995f44f87a81311d13a441d
> [02/10] drm/panel: himax-hx8394: Drop shutdown logic
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e4f53a4d921eba6187a2599cf184a3beeb604fe2
> [03/10] dt-bindings: display: Document Himax HX8394 panel rotation
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=be478bc7ab08127473ce9ed893378cc2a8762611
> [04/10] drm/panel: himax-hx8394: Add Panel Rotation Support
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=a695a5009c8fd239a98d98209489997ff5397d2b
> [05/10] dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=00830a0d8f0d820335e7beb26e251069d90f2574
> [06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=38db985966d2f0f89f7e1891253489a16936fc5e
> [07/10] clk: rockchip: Mark pclk_usb as critical on rk3568
>          (no commit info)
> [08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz
>          (no commit info)
> [09/10] dt-bindings: arm: rockchip: Add Powkiddy X55
>          (no commit info)
> [10/10] arm64: dts: rockchip: Add Powkiddy X55
>          (no commit info)
> 

To clarify, only patches 1 to 6 were applied to drm-misc-next,

Thanks,
Neil

Re: [PATCH V2 00/10] rockchip: Add Powkiddy X55

[Neil Armstrong]

On 05/12/2023 09:26, Neil Armstrong wrote:
> Hi,
> 
> On Mon, 04 Dec 2023 12:57:09 -0600, Chris Morgan wrote:
>> From: Chris Morgan <macromorgan@hotmail.com>
>>
>> Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
>> console.
>>
>> Changes since V1:
>>   - Corrected a bug with the DRM mode flags for the video driver.
>>   - Adjusted panel front and back porch and pixel clock to fix
>>     issues with display that occurred after correcting DRM mode
>>     flag bug.
>>   - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.
>>
>> [...]
> 
> Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
> 
> [01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=8c2c5d1d33f0725b7995f44f87a81311d13a441d
> [02/10] drm/panel: himax-hx8394: Drop shutdown logic
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e4f53a4d921eba6187a2599cf184a3beeb604fe2
> [03/10] dt-bindings: display: Document Himax HX8394 panel rotation
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=be478bc7ab08127473ce9ed893378cc2a8762611
> [04/10] drm/panel: himax-hx8394: Add Panel Rotation Support
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=a695a5009c8fd239a98d98209489997ff5397d2b
> [05/10] dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=00830a0d8f0d820335e7beb26e251069d90f2574
> [06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
>          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=38db985966d2f0f89f7e1891253489a16936fc5e
> [07/10] clk: rockchip: Mark pclk_usb as critical on rk3568
>          (no commit info)
> [08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz
>          (no commit info)
> [09/10] dt-bindings: arm: rockchip: Add Powkiddy X55
>          (no commit info)
> [10/10] arm64: dts: rockchip: Add Powkiddy X55
>          (no commit info)
> 

To clarify, only patches 1 to 6 were applied to drm-misc-next,

Thanks,
Neil

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH V2 00/10] rockchip: Add Powkiddy X55

[Heiko Stübner]

Am Dienstag, 5. Dezember 2023, 09:28:24 CET schrieb Neil Armstrong:
> On 05/12/2023 09:26, Neil Armstrong wrote:
> > Hi,
> > 
> > On Mon, 04 Dec 2023 12:57:09 -0600, Chris Morgan wrote:
> >> From: Chris Morgan <macromorgan@hotmail.com>
> >>
> >> Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
> >> console.
> >>
> >> Changes since V1:
> >>   - Corrected a bug with the DRM mode flags for the video driver.
> >>   - Adjusted panel front and back porch and pixel clock to fix
> >>     issues with display that occurred after correcting DRM mode
> >>     flag bug.
> >>   - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.
> >>
> >> [...]
> > 
> > Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
> > 
> > [01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=8c2c5d1d33f0725b7995f44f87a81311d13a441d
> > [02/10] drm/panel: himax-hx8394: Drop shutdown logic
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e4f53a4d921eba6187a2599cf184a3beeb604fe2
> > [03/10] dt-bindings: display: Document Himax HX8394 panel rotation
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=be478bc7ab08127473ce9ed893378cc2a8762611
> > [04/10] drm/panel: himax-hx8394: Add Panel Rotation Support
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=a695a5009c8fd239a98d98209489997ff5397d2b
> > [05/10] dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=00830a0d8f0d820335e7beb26e251069d90f2574
> > [06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=38db985966d2f0f89f7e1891253489a16936fc5e
> > [07/10] clk: rockchip: Mark pclk_usb as critical on rk3568
> >          (no commit info)
> > [08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz
> >          (no commit info)
> > [09/10] dt-bindings: arm: rockchip: Add Powkiddy X55
> >          (no commit info)
> > [10/10] arm64: dts: rockchip: Add Powkiddy X55
> >          (no commit info)
> > 
> 
> To clarify, only patches 1 to 6 were applied to drm-misc-next,

thanks for the clarification (and applying the patches already)

Heiko

Re: [PATCH V2 00/10] rockchip: Add Powkiddy X55

[Heiko Stübner]

Am Dienstag, 5. Dezember 2023, 09:28:24 CET schrieb Neil Armstrong:
> On 05/12/2023 09:26, Neil Armstrong wrote:
> > Hi,
> > 
> > On Mon, 04 Dec 2023 12:57:09 -0600, Chris Morgan wrote:
> >> From: Chris Morgan <macromorgan@hotmail.com>
> >>
> >> Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
> >> console.
> >>
> >> Changes since V1:
> >>   - Corrected a bug with the DRM mode flags for the video driver.
> >>   - Adjusted panel front and back porch and pixel clock to fix
> >>     issues with display that occurred after correcting DRM mode
> >>     flag bug.
> >>   - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.
> >>
> >> [...]
> > 
> > Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
> > 
> > [01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=8c2c5d1d33f0725b7995f44f87a81311d13a441d
> > [02/10] drm/panel: himax-hx8394: Drop shutdown logic
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e4f53a4d921eba6187a2599cf184a3beeb604fe2
> > [03/10] dt-bindings: display: Document Himax HX8394 panel rotation
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=be478bc7ab08127473ce9ed893378cc2a8762611
> > [04/10] drm/panel: himax-hx8394: Add Panel Rotation Support
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=a695a5009c8fd239a98d98209489997ff5397d2b
> > [05/10] dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=00830a0d8f0d820335e7beb26e251069d90f2574
> > [06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=38db985966d2f0f89f7e1891253489a16936fc5e
> > [07/10] clk: rockchip: Mark pclk_usb as critical on rk3568
> >          (no commit info)
> > [08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz
> >          (no commit info)
> > [09/10] dt-bindings: arm: rockchip: Add Powkiddy X55
> >          (no commit info)
> > [10/10] arm64: dts: rockchip: Add Powkiddy X55
> >          (no commit info)
> > 
> 
> To clarify, only patches 1 to 6 were applied to drm-misc-next,

thanks for the clarification (and applying the patches already)

Heiko

Re: [PATCH V2 00/10] rockchip: Add Powkiddy X55

[Heiko Stübner]

Am Dienstag, 5. Dezember 2023, 09:28:24 CET schrieb Neil Armstrong:
> On 05/12/2023 09:26, Neil Armstrong wrote:
> > Hi,
> > 
> > On Mon, 04 Dec 2023 12:57:09 -0600, Chris Morgan wrote:
> >> From: Chris Morgan <macromorgan@hotmail.com>
> >>
> >> Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
> >> console.
> >>
> >> Changes since V1:
> >>   - Corrected a bug with the DRM mode flags for the video driver.
> >>   - Adjusted panel front and back porch and pixel clock to fix
> >>     issues with display that occurred after correcting DRM mode
> >>     flag bug.
> >>   - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.
> >>
> >> [...]
> > 
> > Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
> > 
> > [01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=8c2c5d1d33f0725b7995f44f87a81311d13a441d
> > [02/10] drm/panel: himax-hx8394: Drop shutdown logic
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e4f53a4d921eba6187a2599cf184a3beeb604fe2
> > [03/10] dt-bindings: display: Document Himax HX8394 panel rotation
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=be478bc7ab08127473ce9ed893378cc2a8762611
> > [04/10] drm/panel: himax-hx8394: Add Panel Rotation Support
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=a695a5009c8fd239a98d98209489997ff5397d2b
> > [05/10] dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=00830a0d8f0d820335e7beb26e251069d90f2574
> > [06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
> >          https://cgit.freedesktop.org/drm/drm-misc/commit/?id=38db985966d2f0f89f7e1891253489a16936fc5e
> > [07/10] clk: rockchip: Mark pclk_usb as critical on rk3568
> >          (no commit info)
> > [08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz
> >          (no commit info)
> > [09/10] dt-bindings: arm: rockchip: Add Powkiddy X55
> >          (no commit info)
> > [10/10] arm64: dts: rockchip: Add Powkiddy X55
> >          (no commit info)
> > 
> 
> To clarify, only patches 1 to 6 were applied to drm-misc-next,

thanks for the clarification (and applying the patches already)

Heiko



_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: (subset) [PATCH V2 00/10] rockchip: Add Powkiddy X55

[Heiko Stuebner]

On Mon, 4 Dec 2023 12:57:09 -0600, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
> console.
> 
> Changes since V1:
>  - Corrected a bug with the DRM mode flags for the video driver.
>  - Adjusted panel front and back porch and pixel clock to fix
>    issues with display that occurred after correcting DRM mode
>    flag bug.
>  - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.
> 
> [...]

Applied, thanks!

[07/10] clk: rockchip: Mark pclk_usb as critical on rk3568
        commit: 721bf080f249ab2adcc4337abe164230bfb8594f
[08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz
        commit: 685da6972647b486980c0cc8fd6bb5d3863fd6b7

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

Re: (subset) [PATCH V2 00/10] rockchip: Add Powkiddy X55

[Heiko Stuebner]

On Mon, 4 Dec 2023 12:57:09 -0600, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
> console.
> 
> Changes since V1:
>  - Corrected a bug with the DRM mode flags for the video driver.
>  - Adjusted panel front and back porch and pixel clock to fix
>    issues with display that occurred after correcting DRM mode
>    flag bug.
>  - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.
> 
> [...]

Applied, thanks!

[07/10] clk: rockchip: Mark pclk_usb as critical on rk3568
        commit: 721bf080f249ab2adcc4337abe164230bfb8594f
[08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz
        commit: 685da6972647b486980c0cc8fd6bb5d3863fd6b7

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

Re: (subset) [PATCH V2 00/10] rockchip: Add Powkiddy X55

[Heiko Stuebner]

On Mon, 4 Dec 2023 12:57:09 -0600, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
> console.
> 
> Changes since V1:
>  - Corrected a bug with the DRM mode flags for the video driver.
>  - Adjusted panel front and back porch and pixel clock to fix
>    issues with display that occurred after correcting DRM mode
>    flag bug.
>  - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.
> 
> [...]

Applied, thanks!

[07/10] clk: rockchip: Mark pclk_usb as critical on rk3568
        commit: 721bf080f249ab2adcc4337abe164230bfb8594f
[08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz
        commit: 685da6972647b486980c0cc8fd6bb5d3863fd6b7

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: (subset) [PATCH V2 00/10] rockchip: Add Powkiddy X55

[Heiko Stuebner]

On Mon, 4 Dec 2023 12:57:09 -0600, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
> console.
> 
> Changes since V1:
>  - Corrected a bug with the DRM mode flags for the video driver.
>  - Adjusted panel front and back porch and pixel clock to fix
>    issues with display that occurred after correcting DRM mode
>    flag bug.
>  - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.
> 
> [...]

Applied, thanks!

[09/10] dt-bindings: arm: rockchip: Add Powkiddy X55
        commit: b7d755653790b5f5497df8bfb146c38beeb33b74
[10/10] arm64: dts: rockchip: Add Powkiddy X55
        commit: 009e2d0c224913eb4f44e9c2efe7a15789fc0c18

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

Re: (subset) [PATCH V2 00/10] rockchip: Add Powkiddy X55

[Heiko Stuebner]

On Mon, 4 Dec 2023 12:57:09 -0600, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
> console.
> 
> Changes since V1:
>  - Corrected a bug with the DRM mode flags for the video driver.
>  - Adjusted panel front and back porch and pixel clock to fix
>    issues with display that occurred after correcting DRM mode
>    flag bug.
>  - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.
> 
> [...]

Applied, thanks!

[09/10] dt-bindings: arm: rockchip: Add Powkiddy X55
        commit: b7d755653790b5f5497df8bfb146c38beeb33b74
[10/10] arm64: dts: rockchip: Add Powkiddy X55
        commit: 009e2d0c224913eb4f44e9c2efe7a15789fc0c18

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

Re: (subset) [PATCH V2 00/10] rockchip: Add Powkiddy X55

[Heiko Stuebner]

On Mon, 4 Dec 2023 12:57:09 -0600, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the Rockchip RK3566 based Powkiddy X55 handheld gaming
> console.
> 
> Changes since V1:
>  - Corrected a bug with the DRM mode flags for the video driver.
>  - Adjusted panel front and back porch and pixel clock to fix
>    issues with display that occurred after correcting DRM mode
>    flag bug.
>  - Add a new clk frequency for PLL_VPLL to get panel to run at ~60hz.
> 
> [...]

Applied, thanks!

[09/10] dt-bindings: arm: rockchip: Add Powkiddy X55
        commit: b7d755653790b5f5497df8bfb146c38beeb33b74
[10/10] arm64: dts: rockchip: Add Powkiddy X55
        commit: 009e2d0c224913eb4f44e9c2efe7a15789fc0c18

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip