* pci_module_init problems
@ 2005-05-19 6:24 Mark D. Studebaker
2005-05-19 6:24 ` Mark M. Hoffman
0 siblings, 1 reply; 3+ messages in thread
From: Mark D. Studebaker @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
i2c-voodoo3 doesn't load for me on a system with a Banshee.
I triple-checked the pci_device_id table.
voodoo3_probe() is never called and pci_module_init returns -ENODEV.
i2c-viapro works for me on a 8233 system (ID 1106:3074).
But on a 686a system (ID 1106:3057)
it doesn't load. Again I rechecked the ID.
CVS sensors-detect still finds these devices but the
CVS modules won't load.
These both worked in 2.7.0.
What's not right with the pci_device_id table or with
pci_module_init???
modultils version 2.4.22.
^ permalink raw reply [flat|nested] 3+ messages in thread
* pci_module_init problems
2005-05-19 6:24 pci_module_init problems Mark D. Studebaker
@ 2005-05-19 6:24 ` Mark M. Hoffman
0 siblings, 0 replies; 3+ messages in thread
From: Mark M. Hoffman @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
* Mark D. Studebaker <mds@paradyne.com> [2003-06-14 14:35:55 -0400]:
> i2c-voodoo3 doesn't load for me on a system with a Banshee.
> I triple-checked the pci_device_id table.
> voodoo3_probe() is never called and pci_module_init returns -ENODEV.
>
> i2c-viapro works for me on a 8233 system (ID 1106:3074).
> But on a 686a system (ID 1106:3057)
> it doesn't load. Again I rechecked the ID.
>
>
>
> CVS sensors-detect still finds these devices but the
> CVS modules won't load.
> These both worked in 2.7.0.
>
> What's not right with the pci_device_id table or with
> pci_module_init???
>
> modultils version 2.4.22.
Did you ever figure this out? I looked (but quickly) and didn't
see anything.
Regards,
--
Mark M. Hoffman
mhoffman@lightlink.com
^ permalink raw reply [flat|nested] 3+ messages in thread
* PCI module init problems
@ 2005-05-19 6:24 Mark D. Studebaker
0 siblings, 0 replies; 3+ messages in thread
From: Mark D. Studebaker @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
No, still no idea what's wrong...
* Mark D. Studebaker <mds@paradyne.com> [2003-06-14 14:35:55 -0400]:
> i2c-voodoo3 doesn't load for me on a system with a Banshee.
> I triple-checked the pci_device_id table.
> voodoo3_probe() is never called and pci_module_init returns -ENODEV.
>
> i2c-viapro works for me on a 8233 system (ID 1106:3074).
> But on a 686a system (ID 1106:3057)
> it doesn't load. Again I rechecked the ID.
>
>
>
> CVS sensors-detect still finds these devices but the
> CVS modules won't load.
> These both worked in 2.7.0.
>
> What's not right with the pci_device_id table or with
> pci_module_init???
>
> modultils version 2.4.22.
Did you ever figure this out? I looked (but quickly) and didn't
see anything.
Regards,
--
Mark M. Hoffman
mhoffman@lightlink.com
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-05-19 6:24 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-05-19 6:24 pci_module_init problems Mark D. Studebaker
2005-05-19 6:24 ` Mark M. Hoffman
-- strict thread matches above, loose matches on Subject: below --
2005-05-19 6:24 PCI module init problems Mark D. Studebaker
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.