* pci_module_init problems
@ 2005-05-19 6:24 Mark D. Studebaker
2005-05-19 6:24 ` Mark M. Hoffman
0 siblings, 1 reply; 3+ messages in thread
From: Mark D. Studebaker @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
i2c-voodoo3 doesn't load for me on a system with a Banshee.
I triple-checked the pci_device_id table.
voodoo3_probe() is never called and pci_module_init returns -ENODEV.
i2c-viapro works for me on a 8233 system (ID 1106:3074).
But on a 686a system (ID 1106:3057)
it doesn't load. Again I rechecked the ID.
CVS sensors-detect still finds these devices but the
CVS modules won't load.
These both worked in 2.7.0.
What's not right with the pci_device_id table or with
pci_module_init???
modultils version 2.4.22.
^ permalink raw reply [flat|nested] 3+ messages in thread
* pci_module_init problems
2005-05-19 6:24 pci_module_init problems Mark D. Studebaker
@ 2005-05-19 6:24 ` Mark M. Hoffman
0 siblings, 0 replies; 3+ messages in thread
From: Mark M. Hoffman @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
* Mark D. Studebaker <mds@paradyne.com> [2003-06-14 14:35:55 -0400]:
> i2c-voodoo3 doesn't load for me on a system with a Banshee.
> I triple-checked the pci_device_id table.
> voodoo3_probe() is never called and pci_module_init returns -ENODEV.
>
> i2c-viapro works for me on a 8233 system (ID 1106:3074).
> But on a 686a system (ID 1106:3057)
> it doesn't load. Again I rechecked the ID.
>
>
>
> CVS sensors-detect still finds these devices but the
> CVS modules won't load.
> These both worked in 2.7.0.
>
> What's not right with the pci_device_id table or with
> pci_module_init???
>
> modultils version 2.4.22.
Did you ever figure this out? I looked (but quickly) and didn't
see anything.
Regards,
--
Mark M. Hoffman
mhoffman@lightlink.com
^ permalink raw reply [flat|nested] 3+ messages in thread
* PCI module init problems
@ 2005-05-19 6:24 Mark D. Studebaker
0 siblings, 0 replies; 3+ messages in thread
From: Mark D. Studebaker @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
No, still no idea what's wrong...
* Mark D. Studebaker <mds@paradyne.com> [2003-06-14 14:35:55 -0400]:
> i2c-voodoo3 doesn't load for me on a system with a Banshee.
> I triple-checked the pci_device_id table.
> voodoo3_probe() is never called and pci_module_init returns -ENODEV.
>
> i2c-viapro works for me on a 8233 system (ID 1106:3074).
> But on a 686a system (ID 1106:3057)
> it doesn't load. Again I rechecked the ID.
>
>
>
> CVS sensors-detect still finds these devices but the
> CVS modules won't load.
> These both worked in 2.7.0.
>
> What's not right with the pci_device_id table or with
> pci_module_init???
>
> modultils version 2.4.22.
Did you ever figure this out? I looked (but quickly) and didn't
see anything.
Regards,
--
Mark M. Hoffman
mhoffman@lightlink.com
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-05-19 6:24 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-05-19 6:24 PCI module init problems Mark D. Studebaker
-- strict thread matches above, loose matches on Subject: below --
2005-05-19 6:24 pci_module_init problems Mark D. Studebaker
2005-05-19 6:24 ` Mark M. Hoffman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.