All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Furniss <andy.furniss@dsl.pipex.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Weighted packet shaping?
Date: Sun, 26 Dec 2004 13:09:42 +0000	[thread overview]
Message-ID: <41CEB816.5030902@dsl.pipex.com> (raw)
In-Reply-To: <20041221034303.GB27656@linux.comp>

Mark Williams (MWP) wrote:

>>
>>Are you sure that FTP is going to class 22 and not default -
>>
>>tc -s qdisc ls dev $INTERFACE or tc -s class ls dev $INTERFACE will show 
>>counters.
> 
> 
> I am.
> I graph using "tc -s qdisc show dev ppp0" with rrdtool.

Ahh, I assume you patched and recompiled your 2.6.8.1.

I just tried the script below on 2.4.24 and 2.6.8.1 and it works as I 
expect.

I checked rates with iptraf and tc -s class ls dev ppp0. If you use 
htb's rate counter than be aware it uses a long average >60 sec and I 
notice that on my 2.6.8.1 setup it says bit where it probably should say 
bps (= bytes per sec).

Does it work for you ?

If you want to graph then add some queues.

Andy.

TC=/sbin/tc
IPTABLES=/usr/local/sbin/iptables


$IPTABLES -t mangle -D POSTROUTING -o ppp0 -p tcp --src 192.168.0.2 -j 
MARK --set-mark 21 &>/dev/null
$IPTABLES -t mangle -D POSTROUTING -o ppp0 -p tcp --src 192.168.0.3 -j 
MARK --set-mark 22 &>/dev/null
$IPTABLES -t mangle -D POSTROUTING -o ppp0 -p ! tcp -j MARK --set-mark 
20 &>/dev/null
$IPTABLES -t mangle -D POSTROUTING -o ppp0 -p tcp -m length --length 
:128 -j MARK --set-mark 20 &>/dev/null

$TC qdisc del dev ppp0 root &>/dev/null

if ( [ "$1" = "stop" ] )
then
         exit
fi

$TC qdisc add dev ppp0 root handle 1: htb default 23
$TC class add dev ppp0 parent 1: classid 1:1 htb rate 220kbit
$TC class add dev ppp0 parent 1:1 classid 1:20 htb rate 120kbit ceil 
220kbit prio 1
$TC class add dev ppp0 parent 1:1 classid 1:21 htb rate 50kbit ceil 
220kbit prio 2
$TC class add dev ppp0 parent 1:1 classid 1:22 htb rate 25kbit ceil 
220kbit prio 3
$TC class add dev ppp0 parent 1:1 classid 1:23 htb rate 25kbit ceil 
220kbit prio 4

$TC filter add dev ppp0 parent 1:0 prio 0 protocol ip handle 20 fw 
flowid 1:20
$TC filter add dev ppp0 parent 1:0 prio 1 protocol ip handle 21 fw 
flowid 1:21
$TC filter add dev ppp0 parent 1:0 prio 2 protocol ip handle 22 fw 
flowid 1:22

$IPTABLES -t mangle -A POSTROUTING -o ppp0 -p tcp --src 192.168.0.2 -j 
MARK --set-mark 21
$IPTABLES -t mangle -A POSTROUTING -o ppp0 -p tcp --src 192.168.0.3 -j 
MARK --set-mark 22
$IPTABLES -t mangle -A POSTROUTING -o ppp0 -p ! tcp -j MARK --set-mark 20
$IPTABLES -t mangle -A POSTROUTING -o ppp0 -p tcp -m length --length 
:128 -j MARK --set-mark 20



_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

  parent reply	other threads:[~2004-12-26 13:09 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-12-21  3:55 [LARTC] Weighted packet shaping? Mark Williams (MWP)
2004-12-22  4:53 ` Mark Williams (MWP)
2004-12-22  9:07 ` Ed Wildgoose
2004-12-22 13:49 ` Andy Furniss
2004-12-22 15:48 ` Mark Williams (MWP)
2004-12-22 22:54 ` Andy Furniss
2004-12-23 10:56 ` Mark Williams (MWP)
2004-12-24 14:08 ` Andy Furniss
2004-12-24 15:19 ` Mark Williams (MWP)
2004-12-24 16:36 ` Andy Furniss
2004-12-26  4:38 ` Mark Williams (MWP)
2004-12-26 13:09 ` Andy Furniss [this message]
2004-12-28  9:35 ` Mark Williams (MWP)
2004-12-29  2:46 ` Andy Furniss
2004-12-29  6:52 ` Mark Williams (MWP)
2004-12-29 13:26 ` Francisco Pereira
2004-12-30  0:05 ` Andy Furniss
2005-01-03 11:22 ` marco ghidinelli
2005-01-04 13:57 ` Andy Furniss

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=41CEB816.5030902@dsl.pipex.com \
    --to=andy.furniss@dsl.pipex.com \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.