From: Mark Lord <liml@rtr.ca>
To: David Greaves <david@dgreaves.com>
Cc: Tejun Heo <htejun@gmail.com>, Jeff Garzik <jgarzik@pobox.com>,
Justin Piszcz <jpiszcz@lucidpixels.com>,
linux-kernel@vger.kernel.org,
IDE/ATA development list <linux-ide@vger.kernel.org>,
albertcc@tw.ibm.com, axboe@suse.de,
Linus Torvalds <torvalds@osdl.org>
Subject: Re: LibPATA code issues / 2.6.15.4
Date: Tue, 28 Feb 2006 09:38:44 -0500 [thread overview]
Message-ID: <44046074.4070201@rtr.ca> (raw)
In-Reply-To: <44042863.2050703@dgreaves.com>
David Greaves wrote:
..
> sd 0:0:0:0: SCSI error: return code = 0x8000002
> sda: Current: sense key: Medium Error
> Additional sense: Unrecovered read error - auto reallocate failed
> end_request: I/O error, dev sda, sector 390716735
> raid5: Disk failure on sda1, disabling device. Operation continuing on 2
> devices
> ata2: no sense translation for op=0x2a cmd=0x3d status: 0x51
> ata2: status=0x51 { DriveReady SeekComplete Error }
> sd 1:0:0:0: SCSI error: return code = 0x8000002
> sdb: Current: sense key: Medium Error
> Additional sense: Unrecovered read error - auto reallocate failed
> end_request: I/O error, dev sdb, sector 390716735
> raid5: Disk failure on sdb1, disabling device. Operation continuing on 1
> devices
..
The error handling still sucks, regardless of FUA.
All of this nonsense about "Medium Error" is pure bogosity here.
Cheers
next prev parent reply other threads:[~2006-02-28 14:38 UTC|newest]
Thread overview: 167+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-14 9:48 LibPATA code issues / 2.6.15.4 Justin Piszcz
2006-02-14 14:50 ` Mark Lord
2006-02-14 16:27 ` David Greaves
2006-02-14 17:12 ` Justin Piszcz
2006-02-14 18:00 ` Mark Lord
2006-02-14 18:06 ` Justin Piszcz
2006-02-23 23:39 ` Justin Piszcz
2006-02-25 15:32 ` Mark Lord
2006-02-25 15:58 ` Justin Piszcz
2006-02-25 16:11 ` Jesper Juhl
2006-02-25 16:21 ` Mark Lord
2006-02-25 11:34 ` David Greaves
2006-02-25 16:20 ` Mark Lord
2006-02-25 17:45 ` Justin Piszcz
2006-02-25 18:28 ` Mark Lord
2006-02-25 18:55 ` Justin Piszcz
2006-02-25 19:29 ` Justin Piszcz
2006-02-25 19:53 ` David Greaves
2006-02-25 19:47 ` David Greaves
2006-02-26 2:27 ` Mark Lord
2006-02-26 9:56 ` David Greaves
2006-02-26 14:04 ` Mark Lord
2006-02-27 21:34 ` Mark Lord
2006-02-28 1:33 ` Tejun Heo
2006-02-28 1:46 ` Linus Torvalds
2006-02-28 2:07 ` Jeff Garzik
2006-02-28 2:14 ` Linus Torvalds
2006-02-28 2:52 ` Jeff Garzik
2006-02-28 3:36 ` Jeff Garzik
2006-02-28 4:11 ` Mark Lord
2006-02-28 10:30 ` Alan Cox
2006-02-28 8:03 ` Jens Axboe
2006-02-28 4:16 ` Mark Lord
2006-02-28 10:32 ` Alan Cox
2006-02-28 10:30 ` Justin Piszcz
2006-02-28 10:39 ` David Greaves
2006-02-28 14:37 ` Mark Lord
2006-02-28 21:04 ` Bill Davidsen
2006-03-08 2:57 ` Mark Lord
2006-03-08 3:18 ` Dave Jones
2006-03-08 3:23 ` Mark Lord
2006-03-08 15:37 ` Bill Davidsen
2006-03-08 15:37 ` Bill Davidsen
2006-02-28 14:38 ` Mark Lord [this message]
[not found] ` <Pine.LNX.4.64.0602280939280.16541@p34>
2006-02-28 14:49 ` Mark Lord
2006-02-28 15:07 ` Jeff Garzik
2006-02-28 15:26 ` Mark Lord
2006-02-28 15:33 ` Jeff Garzik
2006-03-01 0:46 ` Mark Lord
2006-03-01 6:01 ` Jeff Garzik
2006-02-28 15:16 ` Alan Cox
2006-03-01 17:33 ` David Greaves
2006-03-01 18:37 ` Alan Cox
2006-03-01 20:12 ` Phillip Susi
2006-03-08 16:46 ` Alan Cox
2006-02-28 15:31 ` Mark Lord
2006-02-28 15:34 ` Jeff Garzik
2006-02-28 16:57 ` Eric D. Mudama
2006-03-01 1:04 ` Mark Lord
2006-03-01 11:37 ` Justin Piszcz
2006-03-01 13:17 ` Justin Piszcz
2006-03-01 17:41 ` David Greaves
2006-03-01 17:46 ` Mark Lord
2006-03-01 18:12 ` David Greaves
2006-03-01 18:30 ` Mark Lord
2006-03-01 18:32 ` Justin Piszcz
2006-03-01 18:33 ` Justin Piszcz
2006-03-01 18:48 ` David Greaves
2006-03-01 19:49 ` David Greaves
2006-03-03 19:38 ` Justin Piszcz
2006-03-03 22:46 ` David Greaves
2006-03-04 14:25 ` Mark Lord
2006-03-06 6:13 ` David Greaves
2006-03-21 18:11 ` David Greaves
2006-03-22 15:23 ` David Greaves
2006-03-05 11:43 ` Justin Piszcz
2006-03-05 12:41 ` Justin Piszcz
2006-03-05 22:58 ` Mark Lord
2006-03-05 23:00 ` Mark Lord
2006-03-05 23:19 ` Justin Piszcz
2006-03-05 23:39 ` Jeff Garzik
2006-04-21 19:14 ` LibPATA code issues / 2.6.16 (previously, 2.6.15.x) Justin Piszcz
2006-04-21 19:18 ` Jeff Garzik
2006-04-21 19:18 ` Jeff Garzik
2006-04-21 19:28 ` Linus Torvalds
2006-04-21 22:46 ` Jeff Garzik
2006-04-21 22:46 ` Jeff Garzik
2006-04-22 0:05 ` Linus Torvalds
2006-05-06 15:09 ` [smartmontools-support]Re: " Leon Woestenberg
2006-05-07 12:44 ` Ingo Oeser
2006-06-11 11:13 ` Justin Piszcz
2006-04-22 16:39 ` Justin Piszcz
2006-03-01 19:06 ` LibPATA code issues / 2.6.15.4 Justin Piszcz
2006-03-01 19:28 ` Mark Lord
2006-03-01 19:35 ` Mark Lord
2006-03-01 19:38 ` Justin Piszcz
2006-03-01 19:41 ` Jeff Garzik
2006-02-26 12:27 ` James Courtier-Dutton
2006-02-26 12:55 ` David Greaves
2006-02-26 13:56 ` Mark Lord
2006-02-26 14:30 ` Kernel SeekCompleteErrors... Different from " James Courtier-Dutton
2006-02-26 17:03 ` Mark Lord
2006-02-26 17:13 ` Dr. David Alan Gilbert
2006-02-26 17:43 ` Alan Cox
2006-02-26 20:36 ` Mark Lord
2006-02-27 11:48 ` Alan Cox
2006-02-27 13:40 ` Mark Lord
2006-02-14 23:58 ` Justin Piszcz
2006-02-17 8:45 ` Jeff Garzik
2006-02-17 14:59 ` Mark Lord
2006-02-17 15:00 ` Justin Piszcz
2006-02-18 20:43 ` Sander
2006-02-18 21:42 ` Mark Lord
2006-02-18 21:51 ` Justin Piszcz
2006-02-19 7:14 ` Sander
2006-02-19 15:30 ` Mark Lord
2006-02-19 17:16 ` Sander
2006-07-06 23:08 ` Justin Piszcz
2006-07-07 13:08 ` Mark Lord
2006-07-07 13:24 ` Justin Piszcz
2006-07-07 13:43 ` Mark Lord
2006-07-07 13:48 ` Justin Piszcz
2006-07-07 14:01 ` Justin Piszcz
2006-07-07 14:35 ` Justin Piszcz
2006-07-07 18:53 ` Justin Piszcz
2006-07-07 19:19 ` Jeff Garzik
2006-07-07 19:28 ` Justin Piszcz
[not found] ` <200607091224.31451.liml@rtr.ca>
2006-07-09 17:27 ` Justin Piszcz
2006-07-09 20:16 ` Justin Piszcz
2006-07-09 20:40 ` LibPATA code issues / 2.6.15.4 (found the opcode=0x35)! Justin Piszcz
2006-07-09 20:46 ` Justin Piszcz
2006-07-09 21:05 ` Justin Piszcz
2006-07-09 22:03 ` Justin Piszcz
2006-07-10 13:59 ` Follow up? " Justin Piszcz
2006-07-10 15:33 ` Alan Cox
2006-07-10 15:45 ` Justin Piszcz
2006-07-11 13:28 ` LibPATA code issues / 2.6.17.3 (What is the next step?) Justin Piszcz
2006-07-11 16:12 ` Alan Cox
2006-07-12 22:10 ` David Greaves
2006-07-12 22:29 ` Justin Piszcz
2006-07-14 15:33 ` David Greaves
2006-07-13 10:55 ` Erik Mouw
2006-07-14 17:16 ` Mark Lord
2006-07-14 17:18 ` Justin Piszcz
2006-07-14 17:39 ` Mark Lord
2006-07-14 18:18 ` Justin Piszcz
2006-07-14 20:02 ` Mark Lord
2006-07-14 17:14 ` Follow up? LibPATA code issues / 2.6.15.4 (found the opcode=0x35)! Mark Lord
2006-07-14 17:17 ` Justin Piszcz
2006-07-14 17:37 ` Mark Lord
2006-07-14 18:17 ` Justin Piszcz
-- strict thread matches above, loose matches on Subject: below --
2006-03-01 19:00 LibPATA code issues / 2.6.15.4 Nicolas Mailhot
2006-03-01 19:22 ` Mark Lord
2006-03-01 23:12 ` Nicolas Mailhot
2006-03-01 23:31 ` Jeff Garzik
2006-03-02 1:19 ` Eric D. Mudama
2006-03-02 1:39 ` Eric D. Mudama
2006-03-14 13:50 me_trash1
2006-03-15 15:03 ` Mark Lord
2006-03-16 10:08 ` Jens Axboe
2006-03-17 5:26 ` Mark Lord
2006-03-17 9:26 ` Albert Lee
2006-03-17 9:57 ` Jeff Garzik
2006-03-17 15:20 ` Eric D. Mudama
2006-03-17 15:20 ` Mark Lord
2006-03-17 15:29 ` Tejun Heo
2006-03-16 0:19 ` markus ebenhoeh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44046074.4070201@rtr.ca \
--to=liml@rtr.ca \
--cc=albertcc@tw.ibm.com \
--cc=axboe@suse.de \
--cc=david@dgreaves.com \
--cc=htejun@gmail.com \
--cc=jgarzik@pobox.com \
--cc=jpiszcz@lucidpixels.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.