From: Jeff Garzik <jgarzik@pobox.com>
To: Justin Piszcz <jpiszcz@lucidpixels.com>
Cc: Mark Lord <lkml@rtr.ca>, David Greaves <david@dgreaves.com>,
Tejun Heo <htejun@gmail.com>,
linux-kernel@vger.kernel.org,
IDE/ATA development list <linux-ide@vger.kernel.org>,
albertcc@tw.ibm.com, axboe@suse.de,
Linus Torvalds <torvalds@osdl.org>,
smartmontools-support@lists.sourceforge.net
Subject: Re: LibPATA code issues / 2.6.16 (previously, 2.6.15.x)
Date: Fri, 21 Apr 2006 15:18:59 -0400 [thread overview]
Message-ID: <44493023.4010109@pobox.com> (raw)
In-Reply-To: <Pine.LNX.4.64.0604211511120.22768@p34>
Justin Piszcz wrote:
> Yet a new problem, under 2.6.16, when I fill up the disk, smartmontools
> reports this:
>
> Apr 21 14:24:20 p34 smartd[1443]: Device: /dev/sdc, 1 Currently unreadable
> (pending) sectors
> Apr 21 14:54:20 p34 smartd[1443]: Device: /dev/sdc, 1 Currently unreadable
> (pending) sectors
> Apr 21 14:54:20 p34 smartd[1443]: Device: /dev/sdc, 1 Offline uncorrectable
> sectors
>
> What made it error under 2.6.16?
>
> $ time dd if=/dev/zero of=file.out
> dd: writing to `file.out': No space left on device
> 781118873+0 records in
> 781118872+0 records out
> 399932862464 bytes (400 GB) copied, 8873.06 seconds, 45.1 MB/s
>
> real 147m53.092s
> user 8m1.395s
> sys 42m4.500s
>
> $
>
> Under 2.6.15.x, I did not see this behavior, is this going bad, or?
That's a disk-level problem. You've got bad sectors.
You can force the disk to replace the bad sectors by doing a disk-level
write:
dd if=/dev/zero of=/dev/sda1 bs=4k
and then test the disk with
smartctl -d ata -t long /dev/sda
If sectors continue to die, the disk is toast.
Jeff
WARNING: multiple messages have this Message-ID (diff)
From: Jeff Garzik <jgarzik@pobox.com>
To: Justin Piszcz <jpiszcz@lucidpixels.com>
Cc: Mark Lord <lkml@rtr.ca>, David Greaves <david@dgreaves.com>,
Tejun Heo <htejun@gmail.com>,
linux-kernel@vger.kernel.org,
IDE/ATA development list <linux-ide@vger.kernel.org>,
albertcc@tw.ibm.com, axboe@suse.de,
Linus Torvalds <torvalds@osdl.org>,
smartmontools-support@lists.sourceforge.net
Subject: Re: LibPATA code issues / 2.6.16 (previously, 2.6.15.x)
Date: Fri, 21 Apr 2006 15:18:59 -0400 [thread overview]
Message-ID: <44493023.4010109@pobox.com> (raw)
In-Reply-To: <Pine.LNX.4.64.0604211511120.22768@p34>
Justin Piszcz wrote:
> Yet a new problem, under 2.6.16, when I fill up the disk, smartmontools
> reports this:
>
> Apr 21 14:24:20 p34 smartd[1443]: Device: /dev/sdc, 1 Currently unreadable
> (pending) sectors
> Apr 21 14:54:20 p34 smartd[1443]: Device: /dev/sdc, 1 Currently unreadable
> (pending) sectors
> Apr 21 14:54:20 p34 smartd[1443]: Device: /dev/sdc, 1 Offline uncorrectable
> sectors
>
> What made it error under 2.6.16?
>
> $ time dd if=/dev/zero of=file.out
> dd: writing to `file.out': No space left on device
> 781118873+0 records in
> 781118872+0 records out
> 399932862464 bytes (400 GB) copied, 8873.06 seconds, 45.1 MB/s
>
> real 147m53.092s
> user 8m1.395s
> sys 42m4.500s
>
> $
>
> Under 2.6.15.x, I did not see this behavior, is this going bad, or?
That's a disk-level problem. You've got bad sectors.
You can force the disk to replace the bad sectors by doing a disk-level
write:
dd if=/dev/zero of=/dev/sda1 bs=4k
and then test the disk with
smartctl -d ata -t long /dev/sda
If sectors continue to die, the disk is toast.
Jeff
next prev parent reply other threads:[~2006-04-21 19:19 UTC|newest]
Thread overview: 151+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-14 9:48 LibPATA code issues / 2.6.15.4 Justin Piszcz
2006-02-14 14:50 ` Mark Lord
2006-02-14 16:27 ` David Greaves
2006-02-14 17:12 ` Justin Piszcz
2006-02-14 18:00 ` Mark Lord
2006-02-14 18:06 ` Justin Piszcz
2006-02-23 23:39 ` Justin Piszcz
2006-02-25 15:32 ` Mark Lord
2006-02-25 15:58 ` Justin Piszcz
2006-02-25 16:11 ` Jesper Juhl
2006-02-25 16:21 ` Mark Lord
2006-02-25 11:34 ` David Greaves
2006-02-25 16:20 ` Mark Lord
2006-02-25 17:45 ` Justin Piszcz
2006-02-25 18:28 ` Mark Lord
2006-02-25 18:55 ` Justin Piszcz
2006-02-25 19:29 ` Justin Piszcz
2006-02-25 19:53 ` David Greaves
2006-02-25 19:47 ` David Greaves
2006-02-26 2:27 ` Mark Lord
2006-02-26 9:56 ` David Greaves
2006-02-26 14:04 ` Mark Lord
2006-02-27 21:34 ` Mark Lord
2006-02-28 1:33 ` Tejun Heo
2006-02-28 1:46 ` Linus Torvalds
2006-02-28 2:07 ` Jeff Garzik
2006-02-28 2:14 ` Linus Torvalds
2006-02-28 2:52 ` Jeff Garzik
2006-02-28 3:36 ` Jeff Garzik
2006-02-28 4:11 ` Mark Lord
2006-02-28 10:30 ` Alan Cox
2006-02-28 8:03 ` Jens Axboe
2006-02-28 4:16 ` Mark Lord
2006-02-28 10:32 ` Alan Cox
2006-02-28 10:30 ` Justin Piszcz
2006-02-28 10:39 ` David Greaves
2006-02-28 14:37 ` Mark Lord
2006-02-28 21:04 ` Bill Davidsen
2006-03-08 2:57 ` Mark Lord
2006-03-08 3:18 ` Dave Jones
2006-03-08 3:23 ` Mark Lord
2006-03-08 15:37 ` Bill Davidsen
2006-03-08 15:37 ` Bill Davidsen
2006-02-28 14:38 ` Mark Lord
[not found] ` <Pine.LNX.4.64.0602280939280.16541@p34>
2006-02-28 14:49 ` Mark Lord
2006-02-28 15:07 ` Jeff Garzik
2006-02-28 15:26 ` Mark Lord
2006-02-28 15:33 ` Jeff Garzik
2006-03-01 0:46 ` Mark Lord
2006-03-01 6:01 ` Jeff Garzik
2006-02-28 15:16 ` Alan Cox
2006-03-01 17:33 ` David Greaves
2006-03-01 18:37 ` Alan Cox
2006-03-01 20:12 ` Phillip Susi
2006-03-08 16:46 ` Alan Cox
2006-02-28 15:31 ` Mark Lord
2006-02-28 15:34 ` Jeff Garzik
2006-02-28 16:57 ` Eric D. Mudama
2006-03-01 1:04 ` Mark Lord
2006-03-01 11:37 ` Justin Piszcz
2006-03-01 13:17 ` Justin Piszcz
2006-03-01 17:41 ` David Greaves
2006-03-01 17:46 ` Mark Lord
2006-03-01 18:12 ` David Greaves
2006-03-01 18:30 ` Mark Lord
2006-03-01 18:32 ` Justin Piszcz
2006-03-01 18:33 ` Justin Piszcz
2006-03-01 18:48 ` David Greaves
2006-03-01 19:49 ` David Greaves
2006-03-03 19:38 ` Justin Piszcz
2006-03-03 22:46 ` David Greaves
2006-03-04 14:25 ` Mark Lord
2006-03-06 6:13 ` David Greaves
2006-03-21 18:11 ` David Greaves
2006-03-22 15:23 ` David Greaves
2006-03-05 11:43 ` Justin Piszcz
2006-03-05 12:41 ` Justin Piszcz
2006-03-05 22:58 ` Mark Lord
2006-03-05 23:00 ` Mark Lord
2006-03-05 23:19 ` Justin Piszcz
2006-03-05 23:39 ` Jeff Garzik
2006-04-21 19:14 ` LibPATA code issues / 2.6.16 (previously, 2.6.15.x) Justin Piszcz
2006-04-21 19:18 ` Jeff Garzik [this message]
2006-04-21 19:18 ` Jeff Garzik
2006-04-21 19:28 ` Linus Torvalds
2006-04-21 22:46 ` Jeff Garzik
2006-04-21 22:46 ` Jeff Garzik
2006-04-22 0:05 ` Linus Torvalds
2006-05-06 15:09 ` [smartmontools-support]Re: " Leon Woestenberg
2006-05-07 12:44 ` Ingo Oeser
2006-06-11 11:13 ` Justin Piszcz
2006-04-22 16:39 ` Justin Piszcz
2006-03-01 19:06 ` LibPATA code issues / 2.6.15.4 Justin Piszcz
2006-03-01 19:28 ` Mark Lord
2006-03-01 19:35 ` Mark Lord
2006-03-01 19:38 ` Justin Piszcz
2006-03-01 19:41 ` Jeff Garzik
2006-02-26 12:27 ` James Courtier-Dutton
2006-02-26 12:55 ` David Greaves
2006-02-26 13:56 ` Mark Lord
2006-02-26 14:30 ` Kernel SeekCompleteErrors... Different from " James Courtier-Dutton
2006-02-26 17:03 ` Mark Lord
2006-02-26 17:13 ` Dr. David Alan Gilbert
2006-02-26 17:43 ` Alan Cox
2006-02-26 20:36 ` Mark Lord
2006-02-27 11:48 ` Alan Cox
2006-02-27 13:40 ` Mark Lord
2006-02-14 23:58 ` Justin Piszcz
2006-02-17 8:45 ` Jeff Garzik
2006-02-17 14:59 ` Mark Lord
2006-02-17 15:00 ` Justin Piszcz
2006-02-18 20:43 ` Sander
2006-02-18 21:42 ` Mark Lord
2006-02-18 21:51 ` Justin Piszcz
2006-02-19 7:14 ` Sander
2006-02-19 15:30 ` Mark Lord
2006-02-19 17:16 ` Sander
2006-07-06 23:08 ` Justin Piszcz
2006-07-07 13:08 ` Mark Lord
2006-07-07 13:24 ` Justin Piszcz
2006-07-07 13:43 ` Mark Lord
2006-07-07 13:48 ` Justin Piszcz
2006-07-07 14:01 ` Justin Piszcz
2006-07-07 14:35 ` Justin Piszcz
2006-07-07 18:53 ` Justin Piszcz
2006-07-07 19:19 ` Jeff Garzik
2006-07-07 19:28 ` Justin Piszcz
[not found] ` <200607091224.31451.liml@rtr.ca>
2006-07-09 17:27 ` Justin Piszcz
2006-07-09 20:16 ` Justin Piszcz
2006-07-09 20:40 ` LibPATA code issues / 2.6.15.4 (found the opcode=0x35)! Justin Piszcz
2006-07-09 20:46 ` Justin Piszcz
2006-07-09 21:05 ` Justin Piszcz
2006-07-09 22:03 ` Justin Piszcz
2006-07-10 13:59 ` Follow up? " Justin Piszcz
2006-07-10 15:33 ` Alan Cox
2006-07-10 15:45 ` Justin Piszcz
2006-07-11 13:28 ` LibPATA code issues / 2.6.17.3 (What is the next step?) Justin Piszcz
2006-07-11 16:12 ` Alan Cox
2006-07-12 22:10 ` David Greaves
2006-07-12 22:29 ` Justin Piszcz
2006-07-14 15:33 ` David Greaves
2006-07-13 10:55 ` Erik Mouw
2006-07-14 17:16 ` Mark Lord
2006-07-14 17:18 ` Justin Piszcz
2006-07-14 17:39 ` Mark Lord
2006-07-14 18:18 ` Justin Piszcz
2006-07-14 20:02 ` Mark Lord
2006-07-14 17:14 ` Follow up? LibPATA code issues / 2.6.15.4 (found the opcode=0x35)! Mark Lord
2006-07-14 17:17 ` Justin Piszcz
2006-07-14 17:37 ` Mark Lord
2006-07-14 18:17 ` Justin Piszcz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44493023.4010109@pobox.com \
--to=jgarzik@pobox.com \
--cc=albertcc@tw.ibm.com \
--cc=axboe@suse.de \
--cc=david@dgreaves.com \
--cc=htejun@gmail.com \
--cc=jpiszcz@lucidpixels.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lkml@rtr.ca \
--cc=smartmontools-support@lists.sourceforge.net \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.