Re: [PATCH] powerpc: Create "rom" (MTD) device prpmc2800

[Sergei Shtylyov <sshtylyov@ru.mvista.com>]

Mark A. Greer wrote:

> For your reference, the exiting DT:
> -----------------------------------
> 
> 	mv64x60@f1000000 { /* Marvell Discovery */
> 		#address-cells = <1>;
> 		#size-cells = <1>;
> 		#interrupt-cells = <1>;
> 		model = "mv64360";			/* Default */
> 		compatible = "marvell,mv64x60";
> 		clock-frequency = <7f28155>;		/* 133.333333 MHz */
> 		reg = <f1000000 00010000>;
> 		virtual-reg = <f1000000>;
> 		ranges = <88000000 88000000 01000000	/* PCI 0 I/O Space */
> 			  80000000 80000000 08000000	/* PCI 0 MEM Space */
> 			  a0000000 a0000000 04000000	/* User FLASH */
> 			  00000000 f1000000 00010000	/* Bridge's regs */
> 			  f2000000 f2000000 00040000>;	/* Integrated SRAM */
> 
> 		flash@a0000000 {
> 			device_type = "rom";
> 			compatible = "direct-mapped";
> 			reg = <a0000000 4000000>; /* Default (64MB) */
> 			probe-type = "CFI";
> 			bank-width = <4>;
> 			partitions = <00000000 00100000 /* RO */
> 				      00100000 00040001 /* RW */
> 				      00140000 00400000 /* RO */
> 				      00540000 039c0000 /* RO */
> 				      03f00000 00100000>; /* RO */

    Hm, this should have been the other way around -- ones with odd size are 
RO, ones with even size are RW.

> 			partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B";
> 		};

> So, what should the DT look like for this thing?  And, what should
> phymap_of.c be doing?

> Mark

WBR, Sergei