[Printing-architecture] First version of slides for Tokyo uploaded

[Printing-architecture] First version of slides for Tokyo uploaded

[Till Kamppeter]

Hi,

I have a first version of the slides for Tokyo, for the introduction and 
the session with overview of the Montreal Summit, uploaded so that we 
can discuss it.

You can find the files on

https://www.linux-foundation.org/~till/tmp/lftokyo2007/

Note that on the slides for the Montreal Summit overview the last slide 
is not complete yet.

In the other sessions selected subjects (most relevant for manufacturers 
will be discussed). There will be not very many slides for them. I will 
work on that slides tomorrow.

Here is the agenda for Tokyo:

http://www.linux-foundation.org/en/OpenPrinting/LFJapanSymposiumTokyo2007

Please look into the slides ASAP and make your suggestions, so that I 
can do the most important changes tomorrow. For smaller changes I will 
also read e-mail while I am in Tokyo.

Updates and further slide sets will be uploaded to the same place.

    Till

[Printing-architecture] Second version of slides for Tokyo uploaded

[Till Kamppeter]

I re-uploaded the slides for the first session in Tokyo 
(printingsummit2007.*). The current version has the following changes:

- Reordered the topics
- Added OP overview from Glen (coherence, ...)
- Added topics to last slide

Feedback welcome.

    Till

Till Kamppeter wrote:
> Hi,
> 
> I have a first version of the slides for Tokyo, for the introduction and 
> the session with overview of the Montreal Summit, uploaded so that we 
> can discuss it.
> 
> You can find the files on
> 
> https://www.linux-foundation.org/~till/tmp/lftokyo2007/
> 
> Note that on the slides for the Montreal Summit overview the last slide 
> is not complete yet.
> 
> In the other sessions selected subjects (most relevant for manufacturers 
> will be discussed). There will be not very many slides for them. I will 
> work on that slides tomorrow.
> 
> Here is the agenda for Tokyo:
> 
> http://www.linux-foundation.org/en/OpenPrinting/LFJapanSymposiumTokyo2007
> 
> Please look into the slides ASAP and make your suggestions, so that I 
> can do the most important changes tomorrow. For smaller changes I will 
> also read e-mail while I am in Tokyo.
> 
> Updates and further slide sets will be uploaded to the same place.
> 
>    Till
> 
> 

Re: [Printing-architecture] Second version of slides for Tokyo uploaded

[Ira McDonald]

All,

Please review these slides and give feedback to Till ASAP.

I've just reviewed them on the phone with Till and may send some
more comments tomorrow.

Cheers,
- Ira

On 10/26/07, Till Kamppeter <till.kamppeter@gmail.com> wrote:
> I re-uploaded the slides for the first session in Tokyo
> (printingsummit2007.*). The current version has the following changes:
>
> - Reordered the topics
> - Added OP overview from Glen (coherence, ...)
> - Added topics to last slide
>
> Feedback welcome.
>
>     Till
>
> Till Kamppeter wrote:
> > Hi,
> >
> > I have a first version of the slides for Tokyo, for the introduction and
> > the session with overview of the Montreal Summit, uploaded so that we
> > can discuss it.
> >
> > You can find the files on
> >
> > https://www.linux-foundation.org/~till/tmp/lftokyo2007/
> >
> > Note that on the slides for the Montreal Summit overview the last slide
> > is not complete yet.
> >
> > In the other sessions selected subjects (most relevant for manufacturers
> > will be discussed). There will be not very many slides for them. I will
> > work on that slides tomorrow.
> >
> > Here is the agenda for Tokyo:
> >
> > http://www.linux-foundation.org/en/OpenPrinting/LFJapanSymposiumTokyo2007
> >
> > Please look into the slides ASAP and make your suggestions, so that I
> > can do the most important changes tomorrow. For smaller changes I will
> > also read e-mail while I am in Tokyo.
> >
> > Updates and further slide sets will be uploaded to the same place.
> >
> >    Till
> >
> >
>
> _______________________________________________
> Printing-architecture mailing list
> Printing-architecture@lists.linux-foundation.org
> https://lists.linux-foundation.org/mailman/listinfo/printing-architecture
>


-- 
Ira McDonald (Musician / Software Architect)
Chair - Linux Foundation Open Printing WG
Blue Roof Music / High North Inc
PO Box 221  Grand Marais, MI  49839
work: +1-906-494-2434
home: +1-906-494-2697
email: blueroofmusic@gmail.com

Re: [Printing-architecture] Second version of slides for Tokyo uploaded

[Ira McDonald]

Hi Till,

Very good!  I carefully read all of your slides this morning.

They are a wonderful distillation of the long HTML summary I wrote
about the Open Printing Summit in Montreal.

They are also still *much* too long to cover in 90 minutes in Tokyo,
so you'll have to skip over some of the slides quickly.

A few edits:
- Page 16 - "expecially" --> "especially"
- Page 17 - break top bullet into two lines about Mac OS X versions
- Page 18 - "Port monitor MIB"  --> "PWG 5107.1 Port Monitor MIB"
  (to emphasize that this is an open standard, not a vendor MIB)
- Page 18 - last line - change "PCK" to "PCL"

Thanks for your hard work.  Good luck in Tokyo this coming week.

Cheers,
- Ira


On 10/26/07, Ira McDonald <blueroofmusic@gmail.com> wrote:
> All,
>
> Please review these slides and give feedback to Till ASAP.
>
> I've just reviewed them on the phone with Till and may send some
> more comments tomorrow.
>
> Cheers,
> - Ira
>
> On 10/26/07, Till Kamppeter <till.kamppeter@gmail.com> wrote:
> > I re-uploaded the slides for the first session in Tokyo
> > (printingsummit2007.*). The current version has the following changes:
> >
> > - Reordered the topics
> > - Added OP overview from Glen (coherence, ...)
> > - Added topics to last slide
> >
> > Feedback welcome.
> >
> >     Till
> >
> > Till Kamppeter wrote:
> > > Hi,
> > >
> > > I have a first version of the slides for Tokyo, for the introduction and
> > > the session with overview of the Montreal Summit, uploaded so that we
> > > can discuss it.
> > >
> > > You can find the files on
> > >
> > > https://www.linux-foundation.org/~till/tmp/lftokyo2007/
> > >
> > > Note that on the slides for the Montreal Summit overview the last slide
> > > is not complete yet.
> > >
> > > In the other sessions selected subjects (most relevant for manufacturers
> > > will be discussed). There will be not very many slides for them. I will
> > > work on that slides tomorrow.
> > >
> > > Here is the agenda for Tokyo:
> > >
> > > http://www.linux-foundation.org/en/OpenPrinting/LFJapanSymposiumTokyo2007
> > >
> > > Please look into the slides ASAP and make your suggestions, so that I
> > > can do the most important changes tomorrow. For smaller changes I will
> > > also read e-mail while I am in Tokyo.
> > >
> > > Updates and further slide sets will be uploaded to the same place.
> > >
> > >    Till
> > >
> > >
> >
> > _______________________________________________
> > Printing-architecture mailing list
> > Printing-architecture@lists.linux-foundation.org
> > https://lists.linux-foundation.org/mailman/listinfo/printing-architecture
> >
>
>
> --
> Ira McDonald (Musician / Software Architect)
> Chair - Linux Foundation Open Printing WG
> Blue Roof Music / High North Inc
> PO Box 221  Grand Marais, MI  49839
> work: +1-906-494-2434
> home: +1-906-494-2697
> email: blueroofmusic@gmail.com
>


-- 
Ira McDonald (Musician / Software Architect)
Chair - Linux Foundation Open Printing WG
Blue Roof Music / High North Inc
PO Box 221  Grand Marais, MI  49839
work: +1-906-494-2434
home: +1-906-494-2697
email: blueroofmusic@gmail.com

Re: [Printing-architecture] Second version of slides for Tokyo uploaded

[Till Kamppeter]

Ira McDonald wrote:
> Very good!  I carefully read all of your slides this morning.
> 
> They are a wonderful distillation of the long HTML summary I wrote
> about the Open Printing Summit in Montreal.
> 
> They are also still *much* too long to cover in 90 minutes in Tokyo,
> so you'll have to skip over some of the slides quickly.
> 
> A few edits:
> - Page 16 - "expecially" --> "especially"
> - Page 17 - break top bullet into two lines about Mac OS X versions
> - Page 18 - "Port monitor MIB"  --> "PWG 5107.1 Port Monitor MIB"
>   (to emphasize that this is an open standard, not a vendor MIB)
> - Page 18 - last line - change "PCK" to "PCL"
> 
> Thanks for your hard work.  Good luck in Tokyo this coming week.

Thank you very much for your proofreading. I have re-uploaded the files 
with your proposed corrections applied.

    Till