Re: [Xenomai-help] at91sam9263 and user-space support compile fails

[paradoxxa <paradoxxa2001@domain.hid>]

Gilles Chanteperdrix schrieb:
> On Mon, May 19, 2008 at 3:04 PM, paradoxxa <paradoxxa2001@domain.hid> wrote:
>   
>> Gilles Chanteperdrix schrieb:
>>     
>>> On Mon, May 19, 2008 at 2:17 PM, paradoxxa <paradoxxa2001@domain.hid> wrote:
>>>
>>>
>>> No, you are talking about CONFIG_DEBUG_LL, I am talking about
>>> CONFIG_DEBUG_INFO. These are two different options. So, this make at
>>> least two options that you changed. Could you check if a kernel with
>>> an unmodified defconfig boots ?
>>>
>>>
>>>       
>> The CONFIG_DEBUG_INFO is already set in the defconfig. The CONFIG_DEBUG_LL i
>> set manually.
>> As well I had to changed the  AT91 Master Clock Frequency.
>>
>> Here are the logs of a unmodified defconfig boot:
>>     
>
> Ok. But this is a boot with your old compiler. Could you try a
> defconfig build (with I-pipe AT91 master clock frequency modified)
> with CodeSourcery compiler ?
>   
> If you can not get CodeSourcery compiler to compile correctly a Linux
> kernel, I can send you the 2007q3 compiler, or you could try to
> compile the kernel with your old compiler, and to compile user-space
> with CodeSourcery compiler.
>   
By the way, how i can figure out if the binary or the compiler is a 
oabi/eabi file/compiler?