Re: [Xenomai-help] at91sam9263 and user-space support compile fails

[Paradoxxa2001@domain.hid]

The manual of my starterkit says i should do this with the vmlinux:

arm-elf-objcopy -O binary -S vmImage vmlinux.bin
gzip -f9 vmlinux.bin
mkimage -A arm -O linux -T kernel -C gzip -a 0x20008000 -e 0x20008000 -n "Linux Kernel Image" -d vmlinux.bin.gz vmImage

When im take the ./arch/arm/boot/compressed/vmlinux it won't work.
If i take the ./vmlinux it is to big.




-----Ursprüngliche Nachricht-----
Von: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org>
Gesendet: 16.05.08 14:18:30
An: Paradoxxa2001@domain.hid
CC: xenomai@xenomai.org
Betreff: Re: [Xenomai-help] at91sam9263 and user-space support compile fails

On Fri, May 16, 2008 at 1:07 PM,  <Paradoxxa2001@domain.hid> wrote:
> I have found some debug flags.
> Now the vmlinux is smaller but still to big
>
> -rwxr-xr-x 1 paradoxxa paradoxxa 4,8M 16. Mai 12:36 vmlinux
> -rwxr-xr-x 1 paradoxxa paradoxxa 1,7M 16. Mai 12:36 arch/arm/boot/compressed/vmlinux

A 1.7M vmlinux is Ok. I do not understand what you mean.

-- 
 Gilles



_____________________________________________________________________
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
http://smartsurfer.web.de/?mc=100071&distributionid=000000000066