From: Paradoxxa2001@domain.hid
To: xenomai@xenomai.org
Subject: Re: [Xenomai-help] at91sam9263 and user-space support compile fails
Date: Mon, 19 May 2008 08:26:54 +0200 [thread overview]
Message-ID: <1168701330@domain.hid> (raw)
God Morning,
I tried "make uImage" already.
I got the messages like:
uncompressing kernel---
crc error
--System halted
I saw that the scripts uses zImage to make the uImage. And the uImage is built
from the arch/arm/boot/compressed/vmlinux. The difference what i saw is that no
compression is used to build the uImage by the scripts.
The Kernel with the printascii Function begin to start.
Here are the logs:
----------------------------------------------------------------------------------------------
Starting kernel ...
<5>Linux version 2.6.24-paradoxxa-pm9263 (support@domain.hid) (gcc version 4.2.3 (Sourcery G++ Lite 2
008q1-126)) #7 Mon May 19 08:01:12 CEST 2008
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: Ronetix PM9263/BB9263
<4>Ignoring unrecognised tag 0x54410008
Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 16384
<7> DMA zone: 128 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 16256 pages, LIFO batch:3
<7> Normal zone: 0 pages used for memmap
<7> Movable zone: 0 pages used for memmap
Clocks: CPU 199 MHz, master 99 MHz, main 18.432 MHz
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
<5>Kernel command line: root=/dev/mtdblock4 rootfstype=jffs2 fbcon=rotate:3 mtdparts=physmap-flash.0
:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),-(rootfs);nand:-(nand) ip=10.0.0.17:10.0.0.20:10.0.0
.20:255.255.255.0:PM9263:eth0:off
<6>AT91: 160 gpio irqs in 5 banks
PID hash table entries: 256 (order: 8, 1024 bytes)
<6>I-pipe 1.9-01: pipeline enabled.
Console: colour dummy device 80x30
<6>console [tty0] enabled
<6>console [ttyS0] enabled
Linux version 2.6.24-paradoxxa-pm9263 (support@domain.hid) (gcc version 4.2.3 (Sourcery G++ Lite 2008
q1-126)) #7 Mon May 19 08:01:12 CEST 2008
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: Ronetix PM9263/BB9263
Ignoring unrecognised tag 0x54410008
Memory policy: ECC disabled, Data cache writeback
Clocks: CPU 199 MHz, master 99 MHz, main 18.432 MHz
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: root=/dev/mtdblock4 rootfstype=jffs2 fbcon=rotate:3 mtdparts=physmap-flash.0:25
6k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),-(rootfs);nand:-(nand) ip=10.0.0.17:10.0.0.20:10.0.0.20
:255.255.255.0:PM9263:eth0:off
AT91: 160 gpio irqs in 5 banks
PID hash table entries: 256 (order: 8, 1024 bytes)
I-pipe 1.9-01: pipeline enabled.
Console: colour dummy device 80x30
console [tty0] enabled
console [ttyS0] enabled
<6>Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>Memory:Memory: 64MB 64MB = 64MB total
= 64MB total
<5>Memory: 61184KB available (3220K code, 388K data, 108K init)
Memory: 61184KB available (3220K code, 388K data, 108K init)
<7>Calibrating delay loop... 99.12 BogoMIPS (lpj=495616)
Mount-cache hash table entries: 512
Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: CPU: Testing write buffer coherency: ok
ok
<6>net_namespace: 64 bytes
net_namespace: 64 bytes
<6>NET: Registered protocol family 16
NET: Registered protocol family 16
<6>usbcore: registered new interface driver usbfs
usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
usbcore: registered new device driver usb
<6>NET: Registered protocol family 2
NET: Registered protocol family 2
<6>Time: at91_tc0 clocksource has been installed.
Time: at91_tc0 clocksource has been installed.
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
<6>TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP: Hash tables configured (established 2048 bind 2048)
TCP: Hash tables configured (established 2048 bind 2048)
<6>TCP reno registered
TCP reno registered
<4>NetWinder Floating Point Emulator V0.97 (double precision)
NetWinder Floating Point Emulator V0.97 (double precision)
<6>I-pipe: Domain Xenomai registered.
I-pipe: Domain Xenomai registered.
<6>Xenomai: hal/arm started.
Xenomai: hal/arm started.
<6>Xenomai: real-time nucleus v2.4.3 (Back to Shalla-Bal) loaded.
Xenomai: real-time nucleus v2.4.3 (Back to Shalla-Bal) loaded.
<6>Xenomai: starting native API services.
Xenomai: starting native API services.
<6>Xenomai: starting POSIX services.
Xenomai: starting POSIX services.
<6>Xenomai: starting RTDM services.
Xenomai: starting RTDM services.
<6>JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
<6>io scheduler noop registered
io scheduler noop registered
<6>io scheduler anticipatory registered (default)
io scheduler anticipatory registered (default)
<6>atmel_lcdfb atmel_lcdfb.0: 4096KiB frame buffer at 70000000 (mapped at c5000000)
atmel_lcdfb atmel_lcdfb.0: 4096KiB frame buffer at 70000000 (mapped at c5000000)
Console: switching to colour frame buffer device 40x30
Console: switching to colour frame buffer device 40x30
<6>atmel_lcdfb atmel_lcdfb.0: fb0: Atmel LCDC at 0x00700000 (mapped at c4850000), irq 26
atmel_lcdfb atmel_lcdfb.0: fb0: Atmel LCDC at 0x00700000 (mapped at c4850000), irq 26
<6>atmel_usart.0: ttyS0 at MMIO 0xfeffee00 (irq = 1) is a ATMEL_SERIAL
atmel_usart.0: ttyS0 at MMIO 0xfeffee00 (irq = 1) is a ATMEL_SERIAL
<6>atmel_usart.1: ttyS1 at MMIO 0xfff8c000 (irq = 7) is a ATMEL_SERIAL
atmel_usart.1: ttyS1 at MMIO 0xfff8c000 (irq = 7) is a ATMEL_SERIAL
<6>MACB_mii_bus: probed
MACB_mii_bus: probed
<6>eth0: Atmel MACB at 0xfffbc000 irq 21 (02:00:11:53:d0:85)
eth0: Atmel MACB at 0xfffbc000 irq 21 (02:00:11:53:d0:85)
<6>eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:01, irq=-1)
eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:01, irq=-1)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
<5>physmap platform flash device: 04000000 at 10000000
physmap platform flash device: 04000000 at 10000000
<6>physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
<7>physmap-flash.0: Found an alias at 0x400000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x800000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0xc00000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x1400000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x1800000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x1c00000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x2000000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x2400000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x2800000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x2c00000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x3000000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x3400000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x3800000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x3c00000 for the chip at 0x0
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query Table at 0x0040
<5>number of CFI chips: 1
number of CFI chips: 1
<5>cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
<5>4 cmdlinepart partitions found on MTD device physmap-flash.0
4 cmdlinepart partitions found on MTD device physmap-flash.0
<5>Creating 4 MTD partitions on "physmap-flash.0":
Creating 4 MTD partitions on "physmap-flash.0":
<5>0x00000000-0x00040000 : "u-boot"
0x00000000-0x00040000 : "u-boot"
<5>0x00040000-0x00050000 : "u-boot-env"
0x00040000-0x00050000 : "u-boot-env"
<5>0x00050000-0x001b0000 : "kernel"
0x00050000-0x001b0000 : "kernel"
<5>0x001b0000-0x00400000 : "rootfs"
0x001b0000-0x00400000 : "rootfs"
<6>NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit)
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit)
<6>AT91 NAND: 8-bit, Software ECC
AT91 NAND: 8-bit, Software ECC
<6>Scanning device for bad blocks
Scanning device for bad blocks
<5>Creating 1 MTD partitions on "at91_nand":
Creating 1 MTD partitions on "at91_nand":
<5>0x00000000-0x10000000 : "nand"
0x00000000-0x10000000 : "nand"
<6>atmel_spi atmel_spi.0: Atmel SPI Controller at 0xfffa4000 (irq 14)
atmel_spi atmel_spi.0: Atmel SPI Controller at 0xfffa4000 (irq 14)
<6>mtd_dataflash spi0.0: AT45DB321x (4224 KBytes)
mtd_dataflash spi0.0: AT45DB321x (4224 KBytes)
<6>atmel_spi atmel_spi.1: Atmel SPI Controller at 0xfffa8000 (irq 15)
atmel_spi atmel_spi.1: Atmel SPI Controller at 0xfffa8000 (irq 15)
<6>at91_cf: irqs det #62, io #56
at91_cf: irqs det #62, io #56
<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
<6>at91_ohci at91_ohci: AT91 OHCI
at91_ohci at91_ohci: AT91 OHCI
<6>at91_ohci at91_ohci: new USB bus registered, assigned bus number 1
at91_ohci at91_ohci: new USB bus registered, assigned bus number 1
<6>at91_ohci at91_ohci: irq 29, io mem 0x00a00000
at91_ohci at91_ohci: irq 29, io mem 0x00a00000
<6>usb usb1: configuration #1 chosen from 1 choice
usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: 2 ports detected
<6>mice: PS/2 mouse device common for all mice
mice: PS/2 mouse device common for all mice
<6>ads7846 spi1.0: touchscreen, irq 31
ads7846 spi1.0: touchscreen, irq 31
<6>input: ADS784x Touchscreen as /class/input/input0
input: ADS784x Touchscreen as /class/input/input0
<6>rtc-at91sam9 at91_rtt.0: rtc core: registered at91_rtt as rtc0
rtc-at91sam9 at91_rtt.0: rtc core: registered at91_rtt as rtc0
<6>Driver for 1-wire Dallas network protocol.
Driver for 1-wire Dallas network protocol.
<6>pm926x_w1, gpio pin 95
pm926x_w1, gpio pin 95
<6>Registered led device: led0
Registered led device: led0
<6>Registered led device: led1
Registered led device: led1
<6>usbcore: registered new interface driver usbhid
usbcore: registered new interface driver usbhid
<6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
<6>Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
<6>ALSA sound/arm/at91-ac97.c:564: ALSA sound/arm/at91-ac97.c:564: AC97C regs = FFFA0000
AC97C regs = FFFA0000
<6>ALSA sound/arm/at91-ac97.c:565: ALSA sound/arm/at91-ac97.c:565: AC97C irq = 18
AC97C irq = 18
<4>ALSA sound/arm/at91-ac97.c:493: ALSA sound/arm/at91-ac97.c:493: at91-ac97: codec read timeout 1
at91-ac97: codec read timeout 1
<4>ALSA sound/arm/at91-ac97.c:493: <4>ALSA sound/arm/at91-ac97.c:493: at91-ac97: codec read timeout
1
at91-ac97: codec read timeout 1
<4>ALSA sound/arm/at91-ac97.c:493: <4>ALSA sound/arm/at91-ac97.c:493: at91-ac97: codec read timeout
1
at91-ac97: codec read timeout 1
<4>ALSA sound/arm/at91-ac97.c:493: <4>ALSA sound/arm/at91-ac97.c:493: at91-ac97: codec read timeout
1
at91-ac97: codec read timeout 1
<6>ASoC version 0.13.1
<6>ASoC version 0.13.1
<6>ALSA device list:
ALSA device list:
<6> #0: Atmel AC97 Controller at 0xfffa0000, irq 18
#0: Atmel AC97 Controller at 0xfffa0000, irq 18
<6>TCP cubic registered
TCP cubic registered
<6>NET: Registered protocol family 1
NET: Registered protocol family 1
<6>NET: Registered protocol family 17
NET: Registered protocol family 17
<6>RPC: Registered udp transport module.
RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
RPC: Registered tcp transport module.
<6>rtc-at91sam9 at91_rtt.0: setting system clock to 2008-05-19 08:15:34 UTC (1211184934)
rtc-at91sam9 at91_rtt.0: setting system clock to 2008-05-19 08:15:34 UTC (1211184934)
IP-Config: Complete:IP-Config: Complete:
device=eth0
device=eth0, addr=10.0.0.17, addr=10.0.0.17, mask=255.255.255.0, mask=255.255.255.0, gw=10.0.0
.20, gw=10.0.0.20,
host=PM9263, domain=, nis-domain=(none),
host=PM9263, domain=, nis-domain=(none),
bootserver=10.0.0.20,
bootserver=10.0.0.20, rootserver=10.0.0.20, rootserver=10.0.0.20, rootpath=, rootpath=
<1>Unable to handle kernel NULL pointer dereference at virtual address 00000001
Unable to handle kernel NULL pointer dereference at virtual address 00000001
<1>pgd = c0004000
pgd = c0004000
<1>[00000001] *pgd=00000000[00000001] *pgd=00000000
Internal error: Oops: 5 [#1]
Internal error: Oops: 5 [#1]
Modules linked in:Modules linked in:
CPU: 0 Not tainted (2.6.24-paradoxxa-pm9263 #7)
CPU: 0 Not tainted (2.6.24-paradoxxa-pm9263 #7)
PC is at name_to_dev_t+0x160/0x28c
PC is at name_to_dev_t+0x160/0x28c
LR is at name_to_dev_t+0x13c/0x28c
LR is at name_to_dev_t+0x13c/0x28c
pc : [<c0023810>] lr : [<c00237ec>] psr: 20000013
sp : c3c17f2c ip : c3c17f2c fp : c3c17f78
pc : [<c0023810>] lr : [<c00237ec>] psr: 20000013
sp : c3c17f2c ip : c3c17f2c fp : c3c17f78
r10: 00000000 r9 : 00000000 r8 : c3c16000
r10: 00000000 r9 : 00000000 r8 : c3c16000
r7 : 00000000 r6 : 00000000 r5 : c001d871 r4 : c3c17f30
r7 : 00000000 r6 : 00000000 r5 : c001d871 r4 : c3c17f30
r3 : 00000001 r2 : 00000001 r1 : 0000006d r0 : 00001730
r3 : 00000001 r2 : 00000001 r1 : 0000006d r0 : 00001730
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 0005317f Table: 20004000 DAC: 00000017
Control: 0005317f Table: 20004000 DAC: 00000017
Process swapper (pid: 1, stack limit = 0xc3c16258)
Process swapper (pid: 1, stack limit = 0xc3c16258)
Stack: (0xc3c17f2c to 0xc3c18000)
Stack: (0xc3c17f2c to 0xc3c18000)
7f20: 7f20: 00000000 00000000 6264746d 6264746
d 6b636f6c 6b636f6c c3c10034 c3c10034 c3c17f48 c3c17f48
7f40: 7f40: c004b3fc c004b3fc c006185c c006185c 00000003 00000003 00000000 00000000 00000000 0000000
0 00000000 00000000 00000001 00000001 c001d86c c001d86c
7f60: 7f60: c001d85c c001d85c 00000000 00000000 c001c070 c001c070 c3c17f94 c3c17f94 c3c17f7c c3c17f7
c c0009328 c0009328 c00236c0 c00236c0 c3c17f88 c3c17f88
7f80: 7f80: c036a4e0 c036a4e0 00000000 00000000 c3c17ff4 c3c17ff4 c3c17f98 c3c17f98 c0008a98 c0008a9
8 c00092a4 c00092a4 00000000 00000000 00000000 00000000
7fa0: 7fa0: 00000000 00000000 c3c17fb0 c3c17fb0 c0024060 c0024060 c0037720 c0037720 00000000 0000000
0 00000000 00000000 c0008868 c0008868 c003ddbc c003ddbc
7fc0: 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0000000
0 00000000 00000000 00000000 00000000 00000000 00000000
7fe0: 7fe0: 00000000 00000000 00000000 00000000 00000000 00000000 c3c17ff8 c3c17ff8 c003ddbc c003ddb
c c0008878 c0008878 0f73fc8c 0f73fc8c 1f13ac4e 1f13ac4e
Backtrace: Backtrace:
[<c00236b0>] [<c00236b0>] (name_to_dev_t+0x0/0x28c) (name_to_dev_t+0x0/0x28c) from [<c0009328>] from
[<c0009328>] (prepare_namespace+0x94/0x16c)
(prepare_namespace+0x94/0x16c)
r7:c001c070 r7:c001c070 r6:00000000 r6:00000000 r5:c001d85c r5:c001d85c r4:c001d86c r4:c001d86c
[<c0009294>] [<c0009294>] (prepare_namespace+0x0/0x16c) (prepare_namespace+0x0/0x16c) from [<c0008a9
8>] from [<c0008a98>] (kernel_init+0x230/0x290)
(kernel_init+0x230/0x290)
r5:00000000 r5:00000000 r4:c036a4e0 r4:c036a4e0
[<c0008868>] [<c0008868>] (kernel_init+0x0/0x290) (kernel_init+0x0/0x290) from [<c003ddbc>] from [<c
003ddbc>] (do_exit+0x0/0x790)
(do_exit+0x0/0x790)
Code: Code: 20000220 20000220 e2833001 e2833001 e50b3020 e50b3020 e51b2020 e51b2020 (e5d21000) (e5d2
1000)
<4>---[ end trace aae4ab6fc1a48acc ]---
---[ end trace aae4ab6fc1a48acc ]---
<0>Kernel panic - not syncing: Attempted to kill init!
Kernel panic - not syncing: Attempted to kill init!
<6>eth0: link up (100/Full)
eth0: link up (100/Full)
----------------------------------------------------------------------------------------------
Thomas
-----Ursprüngliche Nachricht-----
Von: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org>
Gesendet: 16.05.08 17:28:23
An: Paradoxxa2001@domain.hid
CC: xenomai@xenomai.org
Betreff: Re: [Xenomai-help] at91sam9263 and user-space support compile fails
On Fri, May 16, 2008 at 4:34 PM, <Paradoxxa2001@domain.hid> wrote:
> OK, i will include the printascii function.
> Thank you for your patience. I appreciate you.
You are welcome. Have you tried "make uImage" ?
--
Gilles
_______________________________________________
Xenomai-help mailing list
Xenomai-help@domain.hid
https://mail.gna.org/listinfo/xenomai-help
_____________________________________________________________________
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
http://smartsurfer.web.de/?mc=100071&distributionid=000000000066
next reply other threads:[~2008-05-19 6:26 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-19 6:26 Paradoxxa2001 [this message]
2008-05-19 9:39 ` [Xenomai-help] at91sam9263 and user-space support compile fails Gilles Chanteperdrix
2008-05-19 11:20 ` paradoxxa
2008-05-19 12:06 ` Gilles Chanteperdrix
2008-05-19 12:17 ` paradoxxa
2008-05-19 12:36 ` Gilles Chanteperdrix
2008-05-19 13:04 ` paradoxxa
2008-05-19 13:30 ` Gilles Chanteperdrix
2008-05-19 14:24 ` paradoxxa
2008-05-19 14:28 ` paradoxxa
2008-05-19 14:34 ` Gilles Chanteperdrix
2008-05-20 6:43 ` paradoxxa
2008-05-20 6:52 ` Gilles Chanteperdrix
2008-05-20 8:19 ` Paradoxxa
2008-05-20 8:20 ` Gilles Chanteperdrix
2008-05-20 8:22 ` Gilles Chanteperdrix
2008-05-20 8:23 ` Gilles Chanteperdrix
2008-05-20 12:43 ` Paradoxxa
2008-05-20 15:16 ` Gilles Chanteperdrix
2008-05-21 6:43 ` Paradoxxa
2008-05-21 6:56 ` Gilles Chanteperdrix
-- strict thread matches above, loose matches on Subject: below --
2008-05-16 14:34 Paradoxxa2001
2008-05-16 15:26 ` Gilles Chanteperdrix
2008-05-16 13:53 Paradoxxa2001
2008-05-16 13:57 ` Gilles Chanteperdrix
2008-05-16 14:01 ` Gilles Chanteperdrix
2008-05-16 12:40 Paradoxxa2001
2008-05-16 12:42 ` Gilles Chanteperdrix
2008-05-16 11:07 Paradoxxa2001
2008-05-16 12:18 ` Gilles Chanteperdrix
2008-05-16 9:34 Paradoxxa2001
2008-05-16 9:45 ` Gilles Chanteperdrix
2008-05-16 9:57 ` Gilles Chanteperdrix
2008-05-16 9:24 Paradoxxa2001
2008-05-16 9:27 ` Gilles Chanteperdrix
2008-05-16 9:10 Paradoxxa2001
2008-05-16 9:18 ` Gilles Chanteperdrix
2008-05-16 8:15 Paradoxxa2001
2008-05-16 8:44 ` Gilles Chanteperdrix
2008-05-15 12:28 Paradoxxa2001
2008-05-15 8:36 Paradoxxa2001
2008-05-15 9:21 ` Gilles Chanteperdrix
2008-05-15 9:46 ` Gilles Chanteperdrix
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1168701330@domain.hid \
--to=paradoxxa2001@domain.hid \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.