From: "Matthias Wächter" <matthias@waechter.wiz.at>
To: Chris Mason <chris.mason@oracle.com>
Cc: Stephan von Krawczynski <skraw@ithnet.com>, linux-btrfs@vger.kernel.org
Subject: Re: Some very basic questions
Date: Wed, 22 Oct 2008 16:04:10 +0200 [thread overview]
Message-ID: <48FF32DA.2010103@waechter.wiz.at> (raw)
In-Reply-To: <1224683433.6448.36.camel@think.oraclecorp.com>
On 10/22/2008 3:50 PM, Chris Mason wrote:
> Let me reword my answer ;). The next write will always succeed unles=
s
> the drive is out of remapping sectors. If the drive is out, it is on=
ly
> good for reads and holding down paper on your desk.
I have a fairly new SATA disk with about 3000 hours of 24/7 duty
(very light load), 0 remapped sectors and 8 consecutive sectors with
read/write errors. Still, it did not perform remapping facing heavy
writes on the bad sectors. Now what? For whatever reason, remapping
not always works (or mine was produced with a total of zero
remapping sectors=E2=80=A6).
- Matthias
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" =
in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-10-22 14:04 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-21 11:23 Some very basic questions Stephan von Krawczynski
2008-10-21 12:13 ` Andi Kleen
2008-10-21 14:22 ` Stephan von Krawczynski
2008-10-21 15:34 ` jim owens
2008-10-22 11:36 ` Stephan von Krawczynski
2008-10-22 12:15 ` Avi Kivity
2008-10-22 13:03 ` Ric Wheeler
2008-10-22 13:13 ` Chris Mason
2008-10-22 13:16 ` Avi Kivity
2008-10-21 13:20 ` jim owens
2008-10-21 17:01 ` Stephan von Krawczynski
2008-10-21 17:15 ` Christoph Hellwig
2008-10-21 17:31 ` Ric Wheeler
2008-10-22 12:27 ` Stephan von Krawczynski
2008-10-22 13:15 ` Chris Mason
2008-10-22 13:27 ` Ric Wheeler
2008-10-22 14:32 ` Avi Kivity
2008-10-22 14:36 ` Chris Mason
2008-10-22 14:40 ` Avi Kivity
2008-10-22 14:46 ` Ric Wheeler
2008-10-22 14:54 ` Avi Kivity
2008-10-22 15:02 ` Ric Wheeler
2008-10-22 15:13 ` Avi Kivity
2008-10-22 15:25 ` Ric Wheeler
2008-10-22 15:33 ` Chris Mason
2008-10-22 15:43 ` Avi Kivity
2008-10-22 15:54 ` Ric Wheeler
2008-10-22 18:28 ` Avi Kivity
2008-10-22 15:39 ` Avi Kivity
2008-10-22 13:52 ` Stephan von Krawczynski
2008-10-22 15:56 ` Michel Salim
2008-10-22 16:56 ` jim owens
2008-10-23 9:47 ` Stephan von Krawczynski
2008-10-22 11:40 ` Stephan von Krawczynski
2008-10-21 13:59 ` Chris Mason
2008-10-21 16:09 ` Andi Kleen
2008-10-22 11:43 ` Stephan von Krawczynski
2008-10-21 16:27 ` Stephan von Krawczynski
2008-10-21 16:59 ` Andi Kleen
2008-10-22 11:46 ` Stephan von Krawczynski
2008-10-21 17:49 ` Chris Mason
2008-10-22 12:19 ` Stephan von Krawczynski
2008-10-22 12:48 ` Jeff Schroeder
2008-10-22 14:02 ` Stephan von Krawczynski
2008-10-22 13:50 ` Chris Mason
2008-10-22 14:04 ` Matthias Wächter [this message]
2008-10-22 14:32 ` Ric Wheeler
2008-10-22 14:44 ` jim owens
2008-10-24 8:42 ` Chris Samuel
2008-10-24 8:39 ` Chris Samuel
2008-10-21 20:54 ` Eric Anopolsky
2008-10-21 22:18 ` Ric Wheeler
2008-10-22 2:29 ` Eric Anopolsky
2008-10-22 10:42 ` Ric Wheeler
2008-10-22 10:53 ` Tejun Heo
2008-10-22 12:57 ` Ric Wheeler
2008-10-22 12:57 ` Ric Wheeler
2008-10-22 13:15 ` Tejun Heo
2008-10-22 13:19 ` Chris Mason
2008-10-22 13:38 ` Ric Wheeler
2008-10-22 13:59 ` Chris Mason
2008-10-22 14:23 ` Ric Wheeler
2008-10-22 13:23 ` Ric Wheeler
2008-10-22 16:14 ` Tejun Heo
2008-10-22 16:34 ` Ric Wheeler
2008-10-23 3:59 ` Tejun Heo
2008-10-22 18:32 ` Avi Kivity
2008-10-22 19:13 ` jim owens
2008-10-22 19:22 ` Avi Kivity
2008-10-22 19:59 ` Ric Wheeler
2008-10-22 21:31 ` Eric Anopolsky
2008-10-22 21:56 ` Ric Wheeler
-- strict thread matches above, loose matches on Subject: below --
2008-10-21 17:37 calin
2008-10-21 20:08 ` jim owens
2008-10-22 7:15 ` Avi Kivity
2008-10-22 14:13 ` jim owens
2008-10-22 14:25 ` Avi Kivity
2008-10-22 14:35 dbz
2008-10-27 15:43 ` Stephan von Krawczynski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48FF32DA.2010103@waechter.wiz.at \
--to=matthias@waechter.wiz.at \
--cc=chris.mason@oracle.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=skraw@ithnet.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.