* [ath9k-devel] N mode
@ 2009-05-16 12:46 Dmitri Seletski
2009-05-16 21:23 ` Dmitri Seletski
0 siblings, 1 reply; 39+ messages in thread
From: Dmitri Seletski @ 2009-05-16 12:46 UTC (permalink / raw)
To: ath9k-devel
Hello Guys.
If not mistaking, wireless N mode kicks in automatically. My Access
point is set to BGN mixed mode. 99% of time i am only user of wireless
at home.
I have dilemma. I can't use cables in house, so wireless is only
solution, i have very quick broadband connection, we are talking about
over megabyte a second.
I wouldn't worry much about N mode, but my current speed on G, is only
600-max 700 kbyte a second. Well, my wifi is bottle neck to my
broadband and it's very annoying.
To make things worse - I get disconneced very often.
I am familiar with console and reconnecting all the time manually is
just plane bad. Writing scripts to keep connection connected is even worse.
What can i do to improve speed and connectivity? Or in other words, what
should i do to enable N mode?(both devices are Dlink and N mode
compatible, thats what i bought them)
a little bit of system info:
my derivers: compat-wireless-2009-05-09
module in use:
/lib/modules/2.6.29.2/updates/drivers/net/wireless/ath/ath9k/ath9k.ko
uname info:
2.6.29.2 #3 SMP PREEMPT Thu May 14 01:19:42 IST 2009 x86_64 AMD
Athlon(tm) 64 X2 Dual Core Processor 6000+ AuthenticAMD GNU/Linux
iwconfig output:
wlan0 IEEE 802.11bgn ESSID:"dlink"
Mode:Managed Frequency:2.462 GHz Access Point:
00:1E:58:B4:F6:83
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
Link Quality=62/70 Signal level=-48 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Link quality is typically between 55-58
Signal lvl between 42-55
I don't use any security on wireless at all(I live in rural area, you
know...), besides i do network inspection once in a while.
Please check out lspci.txt for more details on my machine.
Below list of inserted kernel modules:
f71882fg 28312 0
snd_seq 49568 0
output 3080 0
ext4 232992 1
jbd2 61912 1 ext4
crc16 1928 1 ext4
fan 5264 0
nvidia 8117912 36
snd_virtuoso 10564 3
snd_oxygen_lib 28424 1 snd_virtuoso
ath9k 241716 0
snd_pcm 67696 2 snd_oxygen_lib
snd_timer 19000 3 snd_seq,snd_pcm
mac80211 193304 1 ath9k
snd_page_alloc 8120 1 snd_pcm
snd_mpu401_uart 6344 1 snd_oxygen_lib
snd_rawmidi 19072 1 snd_mpu401_uart
snd_seq_device 5564 2 snd_seq,snd_rawmidi
ath 9000 1 ath9k
snd 50344 12
snd_seq,snd_virtuoso,snd_oxygen_lib,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
r8169 36620 0
k8temp 5320 0
i2c_core 26592 1 nvidia
hwmon 2920 2 f71882fg,k8temp
cfg80211 84384 3 ath9k,mac80211,ath
soundcore 7744 1 snd
Any ideas or advices appreciated, thanks.
Dmitri
P.S.: i did approach you before i had terrible problems between wifi and
sli cards, since than motherboard was changed. Now things seem to work.
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lspci.txt
Url: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20090516/1ef8b708/attachment-0001.txt
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-16 12:46 [ath9k-devel] N mode Dmitri Seletski
@ 2009-05-16 21:23 ` Dmitri Seletski
2009-05-18 15:33 ` Luis R. Rodriguez
0 siblings, 1 reply; 39+ messages in thread
From: Dmitri Seletski @ 2009-05-16 21:23 UTC (permalink / raw)
To: ath9k-devel
Dmitri Seletski wrote:
> Hello Guys.
>
> If not mistaking, wireless N mode kicks in automatically. My Access
> point is set to BGN mixed mode. 99% of time i am only user of wireless
> at home.
> I have dilemma. I can't use cables in house, so wireless is only
> solution, i have very quick broadband connection, we are talking about
> over megabyte a second.
>
> I wouldn't worry much about N mode, but my current speed on G, is only
> 600-max 700 kbyte a second. Well, my wifi is bottle neck to my
> broadband and it's very annoying.
> To make things worse - I get disconneced very often.
> I am familiar with console and reconnecting all the time manually is
> just plane bad. Writing scripts to keep connection connected is even worse.
>
> What can i do to improve speed and connectivity? Or in other words, what
> should i do to enable N mode?(both devices are Dlink and N mode
> compatible, thats what i bought them)
>
> a little bit of system info:
> my derivers: compat-wireless-2009-05-09
>
> module in use:
> /lib/modules/2.6.29.2/updates/drivers/net/wireless/ath/ath9k/ath9k.ko
>
> uname info:
> 2.6.29.2 #3 SMP PREEMPT Thu May 14 01:19:42 IST 2009 x86_64 AMD
> Athlon(tm) 64 X2 Dual Core Processor 6000+ AuthenticAMD GNU/Linux
>
> iwconfig output:
> wlan0 IEEE 802.11bgn ESSID:"dlink"
> Mode:Managed Frequency:2.462 GHz Access Point:
> 00:1E:58:B4:F6:83
> Bit Rate=1 Mb/s Tx-Power=20 dBm
> Retry long limit:7 RTS thr:off Fragment thr:off
> Encryption key:off
> Power Management:on
> Link Quality=62/70 Signal level=-48 dBm
> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>
>
> Link quality is typically between 55-58
> Signal lvl between 42-55
>
> I don't use any security on wireless at all(I live in rural area, you
> know...), besides i do network inspection once in a while.
>
> Please check out lspci.txt for more details on my machine.
>
> Below list of inserted kernel modules:
>
> f71882fg 28312 0
> snd_seq 49568 0
> output 3080 0
> ext4 232992 1
> jbd2 61912 1 ext4
> crc16 1928 1 ext4
> fan 5264 0
> nvidia 8117912 36
> snd_virtuoso 10564 3
> snd_oxygen_lib 28424 1 snd_virtuoso
> ath9k 241716 0
> snd_pcm 67696 2 snd_oxygen_lib
> snd_timer 19000 3 snd_seq,snd_pcm
> mac80211 193304 1 ath9k
> snd_page_alloc 8120 1 snd_pcm
> snd_mpu401_uart 6344 1 snd_oxygen_lib
> snd_rawmidi 19072 1 snd_mpu401_uart
> snd_seq_device 5564 2 snd_seq,snd_rawmidi
> ath 9000 1 ath9k
> snd 50344 12
> snd_seq,snd_virtuoso,snd_oxygen_lib,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
> r8169 36620 0
> k8temp 5320 0
> i2c_core 26592 1 nvidia
> hwmon 2920 2 f71882fg,k8temp
> cfg80211 84384 3 ath9k,mac80211,ath
> soundcore 7744 1 snd
>
>
> Any ideas or advices appreciated, thanks.
> Dmitri
>
> P.S.: i did approach you before i had terrible problems between wifi and
> sli cards, since than motherboard was changed. Now things seem to work.
>
>
One more thing I have noticed, when i put access point into 802.11 N
mode, iwlist wlan0 scan doesn't bring any result anymore...
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-16 21:23 ` Dmitri Seletski
@ 2009-05-18 15:33 ` Luis R. Rodriguez
2009-05-18 20:56 ` Dmitri Seletski
0 siblings, 1 reply; 39+ messages in thread
From: Luis R. Rodriguez @ 2009-05-18 15:33 UTC (permalink / raw)
To: ath9k-devel
On Sat, May 16, 2009 at 02:23:53PM -0700, Dmitri Seletski wrote:
> Dmitri Seletski wrote:
> > Hello Guys.
> >
> > If not mistaking, wireless N mode kicks in automatically. My Access
> > point is set to BGN mixed mode. 99% of time i am only user of wireless
> > at home.
> > I have dilemma. I can't use cables in house, so wireless is only
> > solution, i have very quick broadband connection, we are talking about
> > over megabyte a second.
> >
> > I wouldn't worry much about N mode, but my current speed on G, is only
> > 600-max 700 kbyte a second. Well, my wifi is bottle neck to my
> > broadband and it's very annoying.
> > To make things worse - I get disconneced very often.
> > I am familiar with console and reconnecting all the time manually is
> > just plane bad. Writing scripts to keep connection connected is even worse.
> >
> > What can i do to improve speed and connectivity? Or in other words, what
> > should i do to enable N mode?(both devices are Dlink and N mode
> > compatible, thats what i bought them)
> >
> > a little bit of system info:
> > my derivers: compat-wireless-2009-05-09
> >
> > module in use:
> > /lib/modules/2.6.29.2/updates/drivers/net/wireless/ath/ath9k/ath9k.ko
> >
> > uname info:
> > 2.6.29.2 #3 SMP PREEMPT Thu May 14 01:19:42 IST 2009 x86_64 AMD
> > Athlon(tm) 64 X2 Dual Core Processor 6000+ AuthenticAMD GNU/Linux
> >
> > iwconfig output:
> > wlan0 IEEE 802.11bgn ESSID:"dlink"
> > Mode:Managed Frequency:2.462 GHz Access Point:
> > 00:1E:58:B4:F6:83
> > Bit Rate=1 Mb/s Tx-Power=20 dBm
> > Retry long limit:7 RTS thr:off Fragment thr:off
> > Encryption key:off
> > Power Management:on
> > Link Quality=62/70 Signal level=-48 dBm
> > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> > Tx excessive retries:0 Invalid misc:0 Missed beacon:0
> >
> >
> > Link quality is typically between 55-58
> > Signal lvl between 42-55
> >
> > I don't use any security on wireless at all(I live in rural area, you
> > know...), besides i do network inspection once in a while.
> >
> > Please check out lspci.txt for more details on my machine.
> >
> > Below list of inserted kernel modules:
> >
> > f71882fg 28312 0
> > snd_seq 49568 0
> > output 3080 0
> > ext4 232992 1
> > jbd2 61912 1 ext4
> > crc16 1928 1 ext4
> > fan 5264 0
> > nvidia 8117912 36
> > snd_virtuoso 10564 3
> > snd_oxygen_lib 28424 1 snd_virtuoso
> > ath9k 241716 0
> > snd_pcm 67696 2 snd_oxygen_lib
> > snd_timer 19000 3 snd_seq,snd_pcm
> > mac80211 193304 1 ath9k
> > snd_page_alloc 8120 1 snd_pcm
> > snd_mpu401_uart 6344 1 snd_oxygen_lib
> > snd_rawmidi 19072 1 snd_mpu401_uart
> > snd_seq_device 5564 2 snd_seq,snd_rawmidi
> > ath 9000 1 ath9k
> > snd 50344 12
> > snd_seq,snd_virtuoso,snd_oxygen_lib,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
> > r8169 36620 0
> > k8temp 5320 0
> > i2c_core 26592 1 nvidia
> > hwmon 2920 2 f71882fg,k8temp
> > cfg80211 84384 3 ath9k,mac80211,ath
> > soundcore 7744 1 snd
> >
> >
> > Any ideas or advices appreciated, thanks.
> > Dmitri
> >
> > P.S.: i did approach you before i had terrible problems between wifi and
> > sli cards, since than motherboard was changed. Now things seem to work.
> >
> >
> One more thing I have noticed, when i put access point into 802.11 N
> mode, iwlist wlan0 scan doesn't bring any result anymore...
2.6.29 is old for ath9k you may want to try the stable compat-wireless
releases.
http://wireless.kernel.org/en/users/Download/stable
Luis
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-18 15:33 ` Luis R. Rodriguez
@ 2009-05-18 20:56 ` Dmitri Seletski
2009-05-18 20:57 ` Dmitri Seletski
2009-05-18 21:09 ` Luis R. Rodriguez
0 siblings, 2 replies; 39+ messages in thread
From: Dmitri Seletski @ 2009-05-18 20:56 UTC (permalink / raw)
To: ath9k-devel
Luis R. Rodriguez wrote:
> On Sat, May 16, 2009 at 02:23:53PM -0700, Dmitri Seletski wrote:
>
>> Dmitri Seletski wrote:
>>
>>> Hello Guys.
>>>
>>> If not mistaking, wireless N mode kicks in automatically. My Access
>>> point is set to BGN mixed mode. 99% of time i am only user of wireless
>>> at home.
>>> I have dilemma. I can't use cables in house, so wireless is only
>>> solution, i have very quick broadband connection, we are talking about
>>> over megabyte a second.
>>>
>>> I wouldn't worry much about N mode, but my current speed on G, is only
>>> 600-max 700 kbyte a second. Well, my wifi is bottle neck to my
>>> broadband and it's very annoying.
>>> To make things worse - I get disconneced very often.
>>> I am familiar with console and reconnecting all the time manually is
>>> just plane bad. Writing scripts to keep connection connected is even worse.
>>>
>>> What can i do to improve speed and connectivity? Or in other words, what
>>> should i do to enable N mode?(both devices are Dlink and N mode
>>> compatible, thats what i bought them)
>>>
>>> a little bit of system info:
>>> my derivers: compat-wireless-2009-05-09
>>>
>>> module in use:
>>> /lib/modules/2.6.29.2/updates/drivers/net/wireless/ath/ath9k/ath9k.ko
>>>
>>> uname info:
>>> 2.6.29.2 #3 SMP PREEMPT Thu May 14 01:19:42 IST 2009 x86_64 AMD
>>> Athlon(tm) 64 X2 Dual Core Processor 6000+ AuthenticAMD GNU/Linux
>>>
>>> iwconfig output:
>>> wlan0 IEEE 802.11bgn ESSID:"dlink"
>>> Mode:Managed Frequency:2.462 GHz Access Point:
>>> 00:1E:58:B4:F6:83
>>> Bit Rate=1 Mb/s Tx-Power=20 dBm
>>> Retry long limit:7 RTS thr:off Fragment thr:off
>>> Encryption key:off
>>> Power Management:on
>>> Link Quality=62/70 Signal level=-48 dBm
>>> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
>>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>>>
>>>
>>> Link quality is typically between 55-58
>>> Signal lvl between 42-55
>>>
>>> I don't use any security on wireless at all(I live in rural area, you
>>> know...), besides i do network inspection once in a while.
>>>
>>> Please check out lspci.txt for more details on my machine.
>>>
>>> Below list of inserted kernel modules:
>>>
>>> f71882fg 28312 0
>>> snd_seq 49568 0
>>> output 3080 0
>>> ext4 232992 1
>>> jbd2 61912 1 ext4
>>> crc16 1928 1 ext4
>>> fan 5264 0
>>> nvidia 8117912 36
>>> snd_virtuoso 10564 3
>>> snd_oxygen_lib 28424 1 snd_virtuoso
>>> ath9k 241716 0
>>> snd_pcm 67696 2 snd_oxygen_lib
>>> snd_timer 19000 3 snd_seq,snd_pcm
>>> mac80211 193304 1 ath9k
>>> snd_page_alloc 8120 1 snd_pcm
>>> snd_mpu401_uart 6344 1 snd_oxygen_lib
>>> snd_rawmidi 19072 1 snd_mpu401_uart
>>> snd_seq_device 5564 2 snd_seq,snd_rawmidi
>>> ath 9000 1 ath9k
>>> snd 50344 12
>>> snd_seq,snd_virtuoso,snd_oxygen_lib,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
>>> r8169 36620 0
>>> k8temp 5320 0
>>> i2c_core 26592 1 nvidia
>>> hwmon 2920 2 f71882fg,k8temp
>>> cfg80211 84384 3 ath9k,mac80211,ath
>>> soundcore 7744 1 snd
>>>
>>>
>>> Any ideas or advices appreciated, thanks.
>>> Dmitri
>>>
>>> P.S.: i did approach you before i had terrible problems between wifi and
>>> sli cards, since than motherboard was changed. Now things seem to work.
>>>
>>>
>>>
>> One more thing I have noticed, when i put access point into 802.11 N
>> mode, iwlist wlan0 scan doesn't bring any result anymore...
>>
>
> 2.6.29 is old for ath9k you may want to try the stable compat-wireless
> releases.
>
> http://wireless.kernel.org/en/users/Download/stable
>
> Luis
>
Hello Luis.
compat-wireless-2009-05-18 is freshest driver i could get.
Last time when I reported N mode problem i was using archive downloaded
from site, just to show i am not lazy :)
You can actually see from path of module, anyway, its not the point. N
mode didn't work than, doesn't work now either.
I have disabled all modes but N, still same issue, i can see Access
Point, but I can't connect to it.
iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: 00:1E:58:B4:F6:83
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=58/70 Signal level=-52 dBm
Encryption key:off
ESSID:"dlink"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=0000000000d13580
Extra: Last beacon: 456ms ago
IE: Unknown: 0005646C696E6B
IE: Unknown: 010882848B968C129824
IE: Unknown: 03010B
IE: Unknown: 2A0100
IE: Unknown: 3204B048606C
IE: Unknown:
DD1E00904C334C1003FFFF000000000000000000000000000000000000000000
IE: Unknown:
2D1A4C1003FFFF000000000000000000000000000000000000000000
IE: Unknown:
DD1A00904C340B080800000000000000000000000000000000000000
IE: Unknown:
3D160B080800000000000000000000000000000000000000
IE: Unknown: DD0900037F01010000FF7F
IE: Unknown: DD0A00037F04010001000000
modprobe -l ath9k
/lib/modules/2.6.29.2/updates/drivers/net/wireless/ath/ath9k/ath9k.ko
Regards
Dmitri
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-18 20:56 ` Dmitri Seletski
@ 2009-05-18 20:57 ` Dmitri Seletski
2009-05-18 21:14 ` Luis R. Rodriguez
2009-05-18 21:09 ` Luis R. Rodriguez
1 sibling, 1 reply; 39+ messages in thread
From: Dmitri Seletski @ 2009-05-18 20:57 UTC (permalink / raw)
To: ath9k-devel
Dmitri Seletski wrote:
> Luis R. Rodriguez wrote:
>
>> On Sat, May 16, 2009 at 02:23:53PM -0700, Dmitri Seletski wrote:
>>
>>
>>> Dmitri Seletski wrote:
>>>
>>>
>>>> Hello Guys.
>>>>
>>>> If not mistaking, wireless N mode kicks in automatically. My Access
>>>> point is set to BGN mixed mode. 99% of time i am only user of wireless
>>>> at home.
>>>> I have dilemma. I can't use cables in house, so wireless is only
>>>> solution, i have very quick broadband connection, we are talking about
>>>> over megabyte a second.
>>>>
>>>> I wouldn't worry much about N mode, but my current speed on G, is only
>>>> 600-max 700 kbyte a second. Well, my wifi is bottle neck to my
>>>> broadband and it's very annoying.
>>>> To make things worse - I get disconneced very often.
>>>> I am familiar with console and reconnecting all the time manually is
>>>> just plane bad. Writing scripts to keep connection connected is even worse.
>>>>
>>>> What can i do to improve speed and connectivity? Or in other words, what
>>>> should i do to enable N mode?(both devices are Dlink and N mode
>>>> compatible, thats what i bought them)
>>>>
>>>> a little bit of system info:
>>>> my derivers: compat-wireless-2009-05-09
>>>>
>>>> module in use:
>>>> /lib/modules/2.6.29.2/updates/drivers/net/wireless/ath/ath9k/ath9k.ko
>>>>
>>>> uname info:
>>>> 2.6.29.2 #3 SMP PREEMPT Thu May 14 01:19:42 IST 2009 x86_64 AMD
>>>> Athlon(tm) 64 X2 Dual Core Processor 6000+ AuthenticAMD GNU/Linux
>>>>
>>>> iwconfig output:
>>>> wlan0 IEEE 802.11bgn ESSID:"dlink"
>>>> Mode:Managed Frequency:2.462 GHz Access Point:
>>>> 00:1E:58:B4:F6:83
>>>> Bit Rate=1 Mb/s Tx-Power=20 dBm
>>>> Retry long limit:7 RTS thr:off Fragment thr:off
>>>> Encryption key:off
>>>> Power Management:on
>>>> Link Quality=62/70 Signal level=-48 dBm
>>>> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
>>>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>>>>
>>>>
>>>> Link quality is typically between 55-58
>>>> Signal lvl between 42-55
>>>>
>>>> I don't use any security on wireless at all(I live in rural area, you
>>>> know...), besides i do network inspection once in a while.
>>>>
>>>> Please check out lspci.txt for more details on my machine.
>>>>
>>>> Below list of inserted kernel modules:
>>>>
>>>> f71882fg 28312 0
>>>> snd_seq 49568 0
>>>> output 3080 0
>>>> ext4 232992 1
>>>> jbd2 61912 1 ext4
>>>> crc16 1928 1 ext4
>>>> fan 5264 0
>>>> nvidia 8117912 36
>>>> snd_virtuoso 10564 3
>>>> snd_oxygen_lib 28424 1 snd_virtuoso
>>>> ath9k 241716 0
>>>> snd_pcm 67696 2 snd_oxygen_lib
>>>> snd_timer 19000 3 snd_seq,snd_pcm
>>>> mac80211 193304 1 ath9k
>>>> snd_page_alloc 8120 1 snd_pcm
>>>> snd_mpu401_uart 6344 1 snd_oxygen_lib
>>>> snd_rawmidi 19072 1 snd_mpu401_uart
>>>> snd_seq_device 5564 2 snd_seq,snd_rawmidi
>>>> ath 9000 1 ath9k
>>>> snd 50344 12
>>>> snd_seq,snd_virtuoso,snd_oxygen_lib,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
>>>> r8169 36620 0
>>>> k8temp 5320 0
>>>> i2c_core 26592 1 nvidia
>>>> hwmon 2920 2 f71882fg,k8temp
>>>> cfg80211 84384 3 ath9k,mac80211,ath
>>>> soundcore 7744 1 snd
>>>>
>>>>
>>>> Any ideas or advices appreciated, thanks.
>>>> Dmitri
>>>>
>>>> P.S.: i did approach you before i had terrible problems between wifi and
>>>> sli cards, since than motherboard was changed. Now things seem to work.
>>>>
>>>>
>>>>
>>>>
>>> One more thing I have noticed, when i put access point into 802.11 N
>>> mode, iwlist wlan0 scan doesn't bring any result anymore...
>>>
>>>
>> 2.6.29 is old for ath9k you may want to try the stable compat-wireless
>> releases.
>>
>> http://wireless.kernel.org/en/users/Download/stable
>>
>> Luis
>>
>>
> Hello Luis.
>
> compat-wireless-2009-05-18 is freshest driver i could get.
> Last time when I reported N mode problem i was using archive downloaded
> from site, just to show i am not lazy :)
> You can actually see from path of module, anyway, its not the point. N
> mode didn't work than, doesn't work now either.
> I have disabled all modes but N, still same issue, i can see Access
> Point, but I can't connect to it.
>
> iwlist wlan0 scan
> wlan0 Scan completed :
> Cell 01 - Address: 00:1E:58:B4:F6:83
> Channel:11
> Frequency:2.462 GHz (Channel 11)
> Quality=58/70 Signal level=-52 dBm
> Encryption key:off
> ESSID:"dlink"
> Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
> 9 Mb/s; 12 Mb/s; 18 Mb/s
> Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
> Mode:Master
> Extra:tsf=0000000000d13580
> Extra: Last beacon: 456ms ago
> IE: Unknown: 0005646C696E6B
> IE: Unknown: 010882848B968C129824
> IE: Unknown: 03010B
> IE: Unknown: 2A0100
> IE: Unknown: 3204B048606C
> IE: Unknown:
> DD1E00904C334C1003FFFF000000000000000000000000000000000000000000
> IE: Unknown:
> 2D1A4C1003FFFF000000000000000000000000000000000000000000
> IE: Unknown:
> DD1A00904C340B080800000000000000000000000000000000000000
> IE: Unknown:
> 3D160B080800000000000000000000000000000000000000
> IE: Unknown: DD0900037F01010000FF7F
> IE: Unknown: DD0A00037F04010001000000
>
> modprobe -l ath9k
> /lib/modules/2.6.29.2/updates/drivers/net/wireless/ath/ath9k/ath9k.ko
>
>
> Regards
> Dmitri
>
>
Forgot to mention, i used bleeding edge this time, but if you want me
to, I can of course try stable branch.
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-18 20:56 ` Dmitri Seletski
2009-05-18 20:57 ` Dmitri Seletski
@ 2009-05-18 21:09 ` Luis R. Rodriguez
2009-05-18 21:17 ` Dmitri Seletski
1 sibling, 1 reply; 39+ messages in thread
From: Luis R. Rodriguez @ 2009-05-18 21:09 UTC (permalink / raw)
To: ath9k-devel
On Mon, May 18, 2009 at 01:56:05PM -0700, Dmitri Seletski wrote:
> Luis R. Rodriguez wrote:
> > On Sat, May 16, 2009 at 02:23:53PM -0700, Dmitri Seletski wrote:
> >
> >> Dmitri Seletski wrote:
> >>
> >>> Hello Guys.
> >>>
> >>> If not mistaking, wireless N mode kicks in automatically. My Access
> >>> point is set to BGN mixed mode. 99% of time i am only user of wireless
> >>> at home.
> >>> I have dilemma. I can't use cables in house, so wireless is only
> >>> solution, i have very quick broadband connection, we are talking about
> >>> over megabyte a second.
> >>>
> >>> I wouldn't worry much about N mode, but my current speed on G, is only
> >>> 600-max 700 kbyte a second. Well, my wifi is bottle neck to my
> >>> broadband and it's very annoying.
> >>> To make things worse - I get disconneced very often.
> >>> I am familiar with console and reconnecting all the time manually is
> >>> just plane bad. Writing scripts to keep connection connected is even worse.
> >>>
> >>> What can i do to improve speed and connectivity? Or in other words, what
> >>> should i do to enable N mode?(both devices are Dlink and N mode
> >>> compatible, thats what i bought them)
> >>>
> >>> a little bit of system info:
> >>> my derivers: compat-wireless-2009-05-09
> >>>
> >>> module in use:
> >>> /lib/modules/2.6.29.2/updates/drivers/net/wireless/ath/ath9k/ath9k.ko
> >>>
> >>> uname info:
> >>> 2.6.29.2 #3 SMP PREEMPT Thu May 14 01:19:42 IST 2009 x86_64 AMD
> >>> Athlon(tm) 64 X2 Dual Core Processor 6000+ AuthenticAMD GNU/Linux
> >>>
> >>> iwconfig output:
> >>> wlan0 IEEE 802.11bgn ESSID:"dlink"
> >>> Mode:Managed Frequency:2.462 GHz Access Point:
> >>> 00:1E:58:B4:F6:83
> >>> Bit Rate=1 Mb/s Tx-Power=20 dBm
> >>> Retry long limit:7 RTS thr:off Fragment thr:off
> >>> Encryption key:off
> >>> Power Management:on
> >>> Link Quality=62/70 Signal level=-48 dBm
> >>> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> >>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
> >>>
> >>>
> >>> Link quality is typically between 55-58
> >>> Signal lvl between 42-55
> >>>
> >>> I don't use any security on wireless at all(I live in rural area, you
> >>> know...), besides i do network inspection once in a while.
> >>>
> >>> Please check out lspci.txt for more details on my machine.
> >>>
> >>> Below list of inserted kernel modules:
> >>>
> >>> f71882fg 28312 0
> >>> snd_seq 49568 0
> >>> output 3080 0
> >>> ext4 232992 1
> >>> jbd2 61912 1 ext4
> >>> crc16 1928 1 ext4
> >>> fan 5264 0
> >>> nvidia 8117912 36
> >>> snd_virtuoso 10564 3
> >>> snd_oxygen_lib 28424 1 snd_virtuoso
> >>> ath9k 241716 0
> >>> snd_pcm 67696 2 snd_oxygen_lib
> >>> snd_timer 19000 3 snd_seq,snd_pcm
> >>> mac80211 193304 1 ath9k
> >>> snd_page_alloc 8120 1 snd_pcm
> >>> snd_mpu401_uart 6344 1 snd_oxygen_lib
> >>> snd_rawmidi 19072 1 snd_mpu401_uart
> >>> snd_seq_device 5564 2 snd_seq,snd_rawmidi
> >>> ath 9000 1 ath9k
> >>> snd 50344 12
> >>> snd_seq,snd_virtuoso,snd_oxygen_lib,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
> >>> r8169 36620 0
> >>> k8temp 5320 0
> >>> i2c_core 26592 1 nvidia
> >>> hwmon 2920 2 f71882fg,k8temp
> >>> cfg80211 84384 3 ath9k,mac80211,ath
> >>> soundcore 7744 1 snd
> >>>
> >>>
> >>> Any ideas or advices appreciated, thanks.
> >>> Dmitri
> >>>
> >>> P.S.: i did approach you before i had terrible problems between wifi and
> >>> sli cards, since than motherboard was changed. Now things seem to work.
> >>>
> >>>
> >>>
> >> One more thing I have noticed, when i put access point into 802.11 N
> >> mode, iwlist wlan0 scan doesn't bring any result anymore...
> >>
> >
> > 2.6.29 is old for ath9k you may want to try the stable compat-wireless
> > releases.
> >
> > http://wireless.kernel.org/en/users/Download/stable
> >
> > Luis
> >
> Hello Luis.
>
> compat-wireless-2009-05-18 is freshest driver i could get.
> Last time when I reported N mode problem i was using archive downloaded
> from site, just to show i am not lazy :)
> You can actually see from path of module, anyway, its not the point. N
> mode didn't work than, doesn't work now either.
> I have disabled all modes but N, still same issue, i can see Access
> Point, but I can't connect to it.
What AP do you have? And what settings are you using (WPA/WPA2/WEP)?
Luis
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-18 20:57 ` Dmitri Seletski
@ 2009-05-18 21:14 ` Luis R. Rodriguez
2009-05-18 21:33 ` Dmitri Seletski
0 siblings, 1 reply; 39+ messages in thread
From: Luis R. Rodriguez @ 2009-05-18 21:14 UTC (permalink / raw)
To: ath9k-devel
On Mon, May 18, 2009 at 01:57:52PM -0700, Dmitri Seletski wrote:
> Forgot to mention, i used bleeding edge this time, but if you want me
> to, I can of course try stable branch.
Bleeding edge is fine but keep in mind john hasn't applied a series
of patches pending for ath9k. Particularly power save fixes have been
posted and by default this is enabled so you can try to disable this
and see if it helps. Set:
CONFIG_MAC80211_DEFAULT_PS=n
If using compat-wireless you can stuff this into config.mk.
Once these patches get merged you can try again with it enabled.
Anyway I don't think your issues may be PS related, but more interoperability
related, your AP may be doing something we don't expect somehow yet in either
mac80211 or ath9k.
Either way please test with PS disabled by default and see if that helps.
You can also try the stable RC releases, that doesn't have PS enabled by
default.
Luis
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-18 21:09 ` Luis R. Rodriguez
@ 2009-05-18 21:17 ` Dmitri Seletski
0 siblings, 0 replies; 39+ messages in thread
From: Dmitri Seletski @ 2009-05-18 21:17 UTC (permalink / raw)
To: ath9k-devel
Luis R. Rodriguez wrote:
> On Mon, May 18, 2009 at 01:56:05PM -0700, Dmitri Seletski wrote:
>
>> Luis R. Rodriguez wrote:
>>
>>> On Sat, May 16, 2009 at 02:23:53PM -0700, Dmitri Seletski wrote:
>>>
>>>
>>>> Dmitri Seletski wrote:
>>>>
>>>>
>>>>> Hello Guys.
>>>>>
>>>>> If not mistaking, wireless N mode kicks in automatically. My Access
>>>>> point is set to BGN mixed mode. 99% of time i am only user of wireless
>>>>> at home.
>>>>> I have dilemma. I can't use cables in house, so wireless is only
>>>>> solution, i have very quick broadband connection, we are talking about
>>>>> over megabyte a second.
>>>>>
>>>>> I wouldn't worry much about N mode, but my current speed on G, is only
>>>>> 600-max 700 kbyte a second. Well, my wifi is bottle neck to my
>>>>> broadband and it's very annoying.
>>>>> To make things worse - I get disconneced very often.
>>>>> I am familiar with console and reconnecting all the time manually is
>>>>> just plane bad. Writing scripts to keep connection connected is even worse.
>>>>>
>>>>> What can i do to improve speed and connectivity? Or in other words, what
>>>>> should i do to enable N mode?(both devices are Dlink and N mode
>>>>> compatible, thats what i bought them)
>>>>>
>>>>> a little bit of system info:
>>>>> my derivers: compat-wireless-2009-05-09
>>>>>
>>>>> module in use:
>>>>> /lib/modules/2.6.29.2/updates/drivers/net/wireless/ath/ath9k/ath9k.ko
>>>>>
>>>>> uname info:
>>>>> 2.6.29.2 #3 SMP PREEMPT Thu May 14 01:19:42 IST 2009 x86_64 AMD
>>>>> Athlon(tm) 64 X2 Dual Core Processor 6000+ AuthenticAMD GNU/Linux
>>>>>
>>>>> iwconfig output:
>>>>> wlan0 IEEE 802.11bgn ESSID:"dlink"
>>>>> Mode:Managed Frequency:2.462 GHz Access Point:
>>>>> 00:1E:58:B4:F6:83
>>>>> Bit Rate=1 Mb/s Tx-Power=20 dBm
>>>>> Retry long limit:7 RTS thr:off Fragment thr:off
>>>>> Encryption key:off
>>>>> Power Management:on
>>>>> Link Quality=62/70 Signal level=-48 dBm
>>>>> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
>>>>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>>>>>
>>>>>
>>>>> Link quality is typically between 55-58
>>>>> Signal lvl between 42-55
>>>>>
>>>>> I don't use any security on wireless at all(I live in rural area, you
>>>>> know...), besides i do network inspection once in a while.
>>>>>
>>>>> Please check out lspci.txt for more details on my machine.
>>>>>
>>>>> Below list of inserted kernel modules:
>>>>>
>>>>> f71882fg 28312 0
>>>>> snd_seq 49568 0
>>>>> output 3080 0
>>>>> ext4 232992 1
>>>>> jbd2 61912 1 ext4
>>>>> crc16 1928 1 ext4
>>>>> fan 5264 0
>>>>> nvidia 8117912 36
>>>>> snd_virtuoso 10564 3
>>>>> snd_oxygen_lib 28424 1 snd_virtuoso
>>>>> ath9k 241716 0
>>>>> snd_pcm 67696 2 snd_oxygen_lib
>>>>> snd_timer 19000 3 snd_seq,snd_pcm
>>>>> mac80211 193304 1 ath9k
>>>>> snd_page_alloc 8120 1 snd_pcm
>>>>> snd_mpu401_uart 6344 1 snd_oxygen_lib
>>>>> snd_rawmidi 19072 1 snd_mpu401_uart
>>>>> snd_seq_device 5564 2 snd_seq,snd_rawmidi
>>>>> ath 9000 1 ath9k
>>>>> snd 50344 12
>>>>> snd_seq,snd_virtuoso,snd_oxygen_lib,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
>>>>> r8169 36620 0
>>>>> k8temp 5320 0
>>>>> i2c_core 26592 1 nvidia
>>>>> hwmon 2920 2 f71882fg,k8temp
>>>>> cfg80211 84384 3 ath9k,mac80211,ath
>>>>> soundcore 7744 1 snd
>>>>>
>>>>>
>>>>> Any ideas or advices appreciated, thanks.
>>>>> Dmitri
>>>>>
>>>>> P.S.: i did approach you before i had terrible problems between wifi and
>>>>> sli cards, since than motherboard was changed. Now things seem to work.
>>>>>
>>>>>
>>>>>
>>>>>
>>>> One more thing I have noticed, when i put access point into 802.11 N
>>>> mode, iwlist wlan0 scan doesn't bring any result anymore...
>>>>
>>>>
>>> 2.6.29 is old for ath9k you may want to try the stable compat-wireless
>>> releases.
>>>
>>> http://wireless.kernel.org/en/users/Download/stable
>>>
>>> Luis
>>>
>>>
>> Hello Luis.
>>
>> compat-wireless-2009-05-18 is freshest driver i could get.
>> Last time when I reported N mode problem i was using archive downloaded
>> from site, just to show i am not lazy :)
>> You can actually see from path of module, anyway, its not the point. N
>> mode didn't work than, doesn't work now either.
>> I have disabled all modes but N, still same issue, i can see Access
>> Point, but I can't connect to it.
>>
>
> What AP do you have? And what settings are you using (WPA/WPA2/WEP)?
>
> Luis
>
DAP-1353 <http://www.dlink.com> Dlink.
Network is unsecure. no wpa/wep/radius/whatever.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: no security.png
Type: image/png
Size: 48523 bytes
Desc: not available
Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20090518/cf95e828/attachment-0001.png
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-18 21:14 ` Luis R. Rodriguez
@ 2009-05-18 21:33 ` Dmitri Seletski
2009-05-18 22:45 ` Luis R. Rodriguez
0 siblings, 1 reply; 39+ messages in thread
From: Dmitri Seletski @ 2009-05-18 21:33 UTC (permalink / raw)
To: ath9k-devel
Luis R. Rodriguez wrote:
> On Mon, May 18, 2009 at 01:57:52PM -0700, Dmitri Seletski wrote:
>
>> Forgot to mention, i used bleeding edge this time, but if you want me
>> to, I can of course try stable branch.
>>
>
> Bleeding edge is fine but keep in mind john hasn't applied a series
> of patches pending for ath9k. Particularly power save fixes have been
> posted and by default this is enabled so you can try to disable this
> and see if it helps. Set:
>
> CONFIG_MAC80211_DEFAULT_PS=n
>
> If using compat-wireless you can stuff this into config.mk.
> Once these patches get merged you can try again with it enabled.
>
> Anyway I don't think your issues may be PS related, but more interoperability
> related, your AP may be doing something we don't expect somehow yet in either
> mac80211 or ath9k.
>
> Either way please test with PS disabled by default and see if that helps.
> You can also try the stable RC releases, that doesn't have PS enabled by
> default.
>
> Luis
>
Same story, downloaded, installed new stable version, connects in gmode
and fails to connect when i set Access Point to N mode.
:( can i add any debug information into it or something?
compat-wireless-2009-05-18 # iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: 00:1E:58:B4:F6:83
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=43/70 Signal level=-67 dBm
Encryption key:off
ESSID:"dlink"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=00000000055f3180
Extra: Last beacon: 345ms ago
IE: Unknown: 0005646C696E6B
IE: Unknown: 010882848B968C129824
IE: Unknown: 03010B
IE: Unknown: 050400010000
IE: Unknown: 2A0100
IE: Unknown: 3204B048606C
IE: Unknown:
DD1E00904C334E1003FFFF000000000000000000000000000000000000000000
IE: Unknown:
2D1A4E1003FFFF000000000000000000000000000000000000000000
IE: Unknown:
DD1A00904C340B0F0800000000000000000000000000000000000000
IE: Unknown:
3D160B0F0800000000000000000000000000000000000000
IE: Unknown: DD0900037F01010000FF7F
IE: Unknown: DD0A00037F04010001000000
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-18 21:33 ` Dmitri Seletski
@ 2009-05-18 22:45 ` Luis R. Rodriguez
2009-05-18 23:09 ` Dmitri Seletski
0 siblings, 1 reply; 39+ messages in thread
From: Luis R. Rodriguez @ 2009-05-18 22:45 UTC (permalink / raw)
To: ath9k-devel
On Mon, May 18, 2009 at 02:33:37PM -0700, Dmitri Seletski wrote:
> Luis R. Rodriguez wrote:
> > On Mon, May 18, 2009 at 01:57:52PM -0700, Dmitri Seletski wrote:
> >
> >> Forgot to mention, i used bleeding edge this time, but if you want me
> >> to, I can of course try stable branch.
> >>
> >
> > Bleeding edge is fine but keep in mind john hasn't applied a series
> > of patches pending for ath9k. Particularly power save fixes have been
> > posted and by default this is enabled so you can try to disable this
> > and see if it helps. Set:
> >
> > CONFIG_MAC80211_DEFAULT_PS=n
> >
> > If using compat-wireless you can stuff this into config.mk.
> > Once these patches get merged you can try again with it enabled.
> >
> > Anyway I don't think your issues may be PS related, but more interoperability
> > related, your AP may be doing something we don't expect somehow yet in either
> > mac80211 or ath9k.
> >
> > Either way please test with PS disabled by default and see if that helps.
> > You can also try the stable RC releases, that doesn't have PS enabled by
> > default.
> >
> > Luis
> >
> Same story, downloaded, installed new stable version, connects in gmode
> and fails to connect when i set Access Point to N mode.
> :( can i add any debug information into it or something?
Did you disable PS?
Better yet John just merged a ton of patches, please give compat-wireless
another shot, I just pushed out a new tarball. You can compile and install
that as is.
v2.6.30-rc6-23952-g30cf869
wireless-testing latest tag:
master-2009-05-18
This is compat-release:
master-2009-05-18-1-gf28a634
Luis
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-18 22:45 ` Luis R. Rodriguez
@ 2009-05-18 23:09 ` Dmitri Seletski
2009-05-18 23:29 ` Luis R. Rodriguez
0 siblings, 1 reply; 39+ messages in thread
From: Dmitri Seletski @ 2009-05-18 23:09 UTC (permalink / raw)
To: ath9k-devel
Luis R. Rodriguez wrote:
> On Mon, May 18, 2009 at 02:33:37PM -0700, Dmitri Seletski wrote:
>
>> Luis R. Rodriguez wrote:
>>
>>> On Mon, May 18, 2009 at 01:57:52PM -0700, Dmitri Seletski wrote:
>>>
>>>
>>>> Forgot to mention, i used bleeding edge this time, but if you want me
>>>> to, I can of course try stable branch.
>>>>
>>>>
>>> Bleeding edge is fine but keep in mind john hasn't applied a series
>>> of patches pending for ath9k. Particularly power save fixes have been
>>> posted and by default this is enabled so you can try to disable this
>>> and see if it helps. Set:
>>>
>>> CONFIG_MAC80211_DEFAULT_PS=n
>>>
>>> If using compat-wireless you can stuff this into config.mk.
>>> Once these patches get merged you can try again with it enabled.
>>>
>>> Anyway I don't think your issues may be PS related, but more interoperability
>>> related, your AP may be doing something we don't expect somehow yet in either
>>> mac80211 or ath9k.
>>>
>>> Either way please test with PS disabled by default and see if that helps.
>>> You can also try the stable RC releases, that doesn't have PS enabled by
>>> default.
>>>
>>> Luis
>>>
>>>
>> Same story, downloaded, installed new stable version, connects in gmode
>> and fails to connect when i set Access Point to N mode.
>> :( can i add any debug information into it or something?
>>
>
> Did you disable PS?
>
> Better yet John just merged a ton of patches, please give compat-wireless
> another shot, I just pushed out a new tarball. You can compile and install
> that as is.
>
> v2.6.30-rc6-23952-g30cf869
> wireless-testing latest tag:
> master-2009-05-18
> This is compat-release:
> master-2009-05-18-1-gf28a634
>
> Luis
>
Luis,
compat-wireless-2009-05-19 # grep CONFIG_MAC80211_DEFAULT_PS config.mk
CONFIG_MAC80211_DEFAULT_PS=n
CONFIG_MAC80211_DEFAULT_PS_VALUE=1
make :)
make unload
make install
modprobe ath9k
ip link set wlan0 up
iwconfig wlan0 essid dlink
last (IMHO)relevan't dmesg messages(got loads of dmesg history today)
[14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
mem=0xffffc200114e0000, irq=19
[14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14216.110829] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
[14216.310267] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
[14216.316846] wlan0 direct probe responded
[14216.316848] wlan0: authenticate with AP 00:1e:58:b4:f6:83
[14216.320962] wlan0: authenticated
[14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83
[14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83
[14216.527099] wlan0: deauthenticated (Reason: 9)
[14217.527273] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
[14217.727264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 timed out
[14231.356054] wlan0: authenticate with AP 00:1e:58:b4:f6:83
[14231.359188] wlan0: authenticated
[14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83
[14231.367102] wlan0: deauthenticated (Reason: 9)
[14232.367277] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
[14232.567284] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
[14232.570837] wlan0 direct probe responded
[14232.570843] wlan0: authenticate with AP 00:1e:58:b4:f6:83
[14232.573250] wlan0: authenticated
[14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83
[14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83
[14232.780130] wlan0: deauthenticated (Reason: 9)
[14233.780276] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
[14233.784639] wlan0 direct probe responded
[14233.784645] wlan0: authenticate with AP 00:1e:58:b4:f6:83
[14233.799082] wlan0: authenticated
[14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
Access point in N mode only currently.
Switching to mixture of N, G, B and dmesg throws this:
[14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
[14435.358964] wlan0: authenticate with AP 00:1e:58:b4:f6:83
[14435.362920] wlan0: authenticated
[14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83
[14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
status=0 aid=1)
[14435.371752] wlan0: associated
[14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[14435.839637] wlan0: disassociated (Reason: 8)
this time connection doesn't seem to work at all, but i have quite weak
wireless medium...(that the reason behind me buying N enabled device in
first place)
Dmesg:
[14435.839637] wlan0: disassociated (Reason: 8)
[14446.014258] wlan0: no IPv6 routers present
[14583.315714] wlan0: authenticate with AP 00:1e:58:b4:f6:83
[14583.320697] wlan0: authenticated
[14583.320702] wlan0: associate with AP 00:1e:58:b4:f6:83
[14583.335389] wlan0: RX ReassocResp from 00:1e:58:b4:f6:83 (capab=0x421
status=0 aid=1)
[14583.335397] wlan0: associated
compat-wireless-2009-05-19 # iwconfig wlan0
wlan0 IEEE 802.11bgn ESSID:"dlink"
Mode:Managed Frequency:2.462 GHz Access Point:
00:1E:58:B4:F6:83
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
Link Quality=48/70 Signal level=-62 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Regards Dmitri
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-18 23:09 ` Dmitri Seletski
@ 2009-05-18 23:29 ` Luis R. Rodriguez
2009-05-18 23:34 ` Dmitri Seletski
2009-05-18 23:36 ` Dmitri Seletski
0 siblings, 2 replies; 39+ messages in thread
From: Luis R. Rodriguez @ 2009-05-18 23:29 UTC (permalink / raw)
To: ath9k-devel
On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski <drjoms@gmail.com> wrote:
> compat-wireless-2009-05-19 # grep CONFIG_MAC80211_DEFAULT_PS config.mk
> CONFIG_MAC80211_DEFAULT_PS=n
> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
>
> make :)
>
> make unload
> make install
> modprobe ath9k
> ip link set wlan0 up
> iwconfig wlan0 essid dlink
>
> last (IMHO)relevan't dmesg messages(got loads of dmesg history today)
>
>
> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
> mem=0xffffc200114e0000, irq=19
> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [14216.110829] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
> [14216.310267] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
> [14216.316846] wlan0 direct probe responded
> [14216.316848] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> [14216.320962] wlan0: authenticated
> [14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83
> [14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83
> [14216.527099] wlan0: deauthenticated (Reason: 9)
I believe reason 9 is you're AP tells you that you are trying to
associate to it without first having authenticated.
> [14217.527273] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
> [14217.727264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 timed out
> [14231.356054] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> [14231.359188] wlan0: authenticated
> [14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83
> [14231.367102] wlan0: deauthenticated (Reason: 9)
And we repeat this here.
> [14232.367277] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
> [14232.567284] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
> [14232.570837] wlan0 direct probe responded
> [14232.570843] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> [14232.573250] wlan0: authenticated
> [14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83
> [14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83
> [14232.780130] wlan0: deauthenticated (Reason: 9)
And here.
> [14233.780276] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
> [14233.784639] wlan0 direct probe responded
> [14233.784645] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> [14233.799082] wlan0: authenticated
> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>
> Access point in N mode only currently.
Hm OK.
> Switching to mixture of N, G, B and dmesg throws this:
> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
> [14435.358964] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> [14435.362920] wlan0: authenticated
> [14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83
> [14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
> status=0 aid=1)
> [14435.371752] wlan0: associated
> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [14435.839637] wlan0: disassociated (Reason: 8)
This is the STA has left. Hm, lets try upgrading your supplicant...
Can you try upgrading to the latest from git?
git://w1.fi/srv/git/hostap.git
Luis
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-18 23:29 ` Luis R. Rodriguez
@ 2009-05-18 23:34 ` Dmitri Seletski
2009-05-18 23:59 ` Luis R. Rodriguez
2009-05-18 23:36 ` Dmitri Seletski
1 sibling, 1 reply; 39+ messages in thread
From: Dmitri Seletski @ 2009-05-18 23:34 UTC (permalink / raw)
To: ath9k-devel
Luis R. Rodriguez wrote:
> On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski <drjoms@gmail.com> wrote:
>
>
>> compat-wireless-2009-05-19 # grep CONFIG_MAC80211_DEFAULT_PS config.mk
>> CONFIG_MAC80211_DEFAULT_PS=n
>> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
>>
>> make :)
>>
>> make unload
>> make install
>> modprobe ath9k
>> ip link set wlan0 up
>> iwconfig wlan0 essid dlink
>>
>> last (IMHO)relevan't dmesg messages(got loads of dmesg history today)
>>
>>
>> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>> mem=0xffffc200114e0000, irq=19
>> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> [14216.110829] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>> [14216.310267] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>> [14216.316846] wlan0 direct probe responded
>> [14216.316848] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> [14216.320962] wlan0: authenticated
>> [14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [14216.527099] wlan0: deauthenticated (Reason: 9)
>>
>
> I believe reason 9 is you're AP tells you that you are trying to
> associate to it without first having authenticated.
>
>
>> [14217.527273] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>> [14217.727264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 timed out
>> [14231.356054] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> [14231.359188] wlan0: authenticated
>> [14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [14231.367102] wlan0: deauthenticated (Reason: 9)
>>
>
> And we repeat this here.
>
>
>> [14232.367277] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>> [14232.567284] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>> [14232.570837] wlan0 direct probe responded
>> [14232.570843] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> [14232.573250] wlan0: authenticated
>> [14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [14232.780130] wlan0: deauthenticated (Reason: 9)
>>
>
> And here.
>
>
>> [14233.780276] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>> [14233.784639] wlan0 direct probe responded
>> [14233.784645] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> [14233.799082] wlan0: authenticated
>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>
>> Access point in N mode only currently.
>>
>
> Hm OK.
>
>
>> Switching to mixture of N, G, B and dmesg throws this:
>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>> [14435.358964] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> [14435.362920] wlan0: authenticated
>> [14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
>> status=0 aid=1)
>> [14435.371752] wlan0: associated
>> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>> [14435.839637] wlan0: disassociated (Reason: 8)
>>
>
> This is the STA has left. Hm, lets try upgrading your supplicant...
> Can you try upgrading to the latest from git?
>
> git://w1.fi/srv/git/hostap.git
>
> Luis
>
Hello Luis.
I have no idea what authentication you are talking about.
I am sure that i dont use any authentication.
compat-wireless-2009-05-19 # pstree
init-+-acpid
|-6*[agetty]
|-bonobo-activati---{bonobo-activati}
|-console-kit-dae---62*[{console-kit-dae}]
|-cpufreq-applet
|-2*[dbus-daemon]
|-dbus-launch
|-dhcpcd
|-exaile---14*[{exaile}]
|-firefox---6*[{firefox}]
|-gconfd-2
|-gdm---gdm-+-X
| `-gnome-session-+-gnome-panel
| |-gnome-terminal-+-bash
| |
|-bash---su---bash---pstree
| | |-bash---ssh
| | |-bash---irssi
| | |-gnome-pty-helpe
| | `-{gnome-terminal}
| |-metacity
| |-nautilus
| |-seahorse-agent
| |-ssh-agent
| `-{gnome-session}
|-gnome-dictionar
|-gnome-keyring-d
|-gnome-power-man
|-gnome-settings--+-esd
| `-{gnome-settings-}
|-gnome-system-mo
|-gvfs-hal-volume
|-gvfsd
|-gvfsd-burn
|-gvfsd-http
|-gvfsd-trash
|-gweather-applet
|-hald---hald-runner-+-hald-addon-acpi
| |-hald-addon-cpuf
| |-hald-addon-inpu
| `-hald-addon-stor
|-hardware-monito
|-mdadm
|-mixer_applet2---{mixer_applet2}
|-mozilla-launche---thunderbird-bin---15*[{thunderbird-bin}]
|-multiload-apple
|-smartd
|-syslog-ng
`-udevd
Regards
Dmitri
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-18 23:29 ` Luis R. Rodriguez
2009-05-18 23:34 ` Dmitri Seletski
@ 2009-05-18 23:36 ` Dmitri Seletski
1 sibling, 0 replies; 39+ messages in thread
From: Dmitri Seletski @ 2009-05-18 23:36 UTC (permalink / raw)
To: ath9k-devel
Luis R. Rodriguez wrote:
> On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski <drjoms@gmail.com> wrote:
>
>
>> compat-wireless-2009-05-19 # grep CONFIG_MAC80211_DEFAULT_PS config.mk
>> CONFIG_MAC80211_DEFAULT_PS=n
>> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
>>
>> make :)
>>
>> make unload
>> make install
>> modprobe ath9k
>> ip link set wlan0 up
>> iwconfig wlan0 essid dlink
>>
>> last (IMHO)relevan't dmesg messages(got loads of dmesg history today)
>>
>>
>> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>> mem=0xffffc200114e0000, irq=19
>> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> [14216.110829] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>> [14216.310267] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>> [14216.316846] wlan0 direct probe responded
>> [14216.316848] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> [14216.320962] wlan0: authenticated
>> [14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [14216.527099] wlan0: deauthenticated (Reason: 9)
>>
>
> I believe reason 9 is you're AP tells you that you are trying to
> associate to it without first having authenticated.
>
>
>> [14217.527273] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>> [14217.727264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 timed out
>> [14231.356054] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> [14231.359188] wlan0: authenticated
>> [14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [14231.367102] wlan0: deauthenticated (Reason: 9)
>>
>
> And we repeat this here.
>
>
>> [14232.367277] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>> [14232.567284] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>> [14232.570837] wlan0 direct probe responded
>> [14232.570843] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> [14232.573250] wlan0: authenticated
>> [14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [14232.780130] wlan0: deauthenticated (Reason: 9)
>>
>
> And here.
>
>
>> [14233.780276] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>> [14233.784639] wlan0 direct probe responded
>> [14233.784645] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> [14233.799082] wlan0: authenticated
>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>
>> Access point in N mode only currently.
>>
>
> Hm OK.
>
>
>> Switching to mixture of N, G, B and dmesg throws this:
>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>> [14435.358964] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> [14435.362920] wlan0: authenticated
>> [14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
>> status=0 aid=1)
>> [14435.371752] wlan0: associated
>> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>> [14435.839637] wlan0: disassociated (Reason: 8)
>>
>
> This is the STA has left. Hm, lets try upgrading your supplicant...
> Can you try upgrading to the latest from git?
>
> git://w1.fi/srv/git/hostap.git
>
> Luis
>
Just to clarify:
compat-wireless-2009-05-19 # lsmod
Module Size Used by
ath9k 271168 0
mac80211 194808 1 ath9k
ath 8968 1 ath9k
cfg80211 87456 3 ath9k,mac80211,ath
f71882fg 28312 0
snd_seq 49568 0
output 3080 0
ext4 232992 1
jbd2 61912 1 ext4
crc16 1928 1 ext4
fan 5264 0
nvidia 8117912 36
snd_virtuoso 10564 5
snd_oxygen_lib 28424 1 snd_virtuoso
snd_pcm 67696 3 snd_oxygen_lib
snd_timer 19000 4 snd_seq,snd_pcm
snd_page_alloc 8120 1 snd_pcm
snd_mpu401_uart 6344 1 snd_oxygen_lib
snd_rawmidi 19072 1 snd_mpu401_uart
snd_seq_device 5564 2 snd_seq,snd_rawmidi
snd 50344 14
snd_seq,snd_virtuoso,snd_oxygen_lib,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
r8169 36620 0
k8temp 5320 0
hwmon 2920 2 f71882fg,k8temp
i2c_core 26592 1 nvidia
soundcore 7744 1 snd
Regards
Dmitri
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-18 23:34 ` Dmitri Seletski
@ 2009-05-18 23:59 ` Luis R. Rodriguez
2009-05-19 0:10 ` Luis R. Rodriguez
0 siblings, 1 reply; 39+ messages in thread
From: Luis R. Rodriguez @ 2009-05-18 23:59 UTC (permalink / raw)
To: ath9k-devel
On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri Seletski wrote:
> Luis R. Rodriguez wrote:
> > On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski <drjoms@gmail.com> wrote:
> >
> >
> >> compat-wireless-2009-05-19 # grep CONFIG_MAC80211_DEFAULT_PS config.mk
> >> CONFIG_MAC80211_DEFAULT_PS=n
> >> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
> >>
> >> make :)
> >>
> >> make unload
> >> make install
> >> modprobe ath9k
> >> ip link set wlan0 up
> >> iwconfig wlan0 essid dlink
> >>
> >> last (IMHO)relevan't dmesg messages(got loads of dmesg history today)
> >>
> >>
> >> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
> >> mem=0xffffc200114e0000, irq=19
> >> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> >> [14216.110829] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
> >> [14216.310267] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
> >> [14216.316846] wlan0 direct probe responded
> >> [14216.316848] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >> [14216.320962] wlan0: authenticated
> >> [14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83
> >> [14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83
> >> [14216.527099] wlan0: deauthenticated (Reason: 9)
> >>
> >
> > I believe reason 9 is you're AP tells you that you are trying to
> > associate to it without first having authenticated.
> >
> >
> >> [14217.527273] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
> >> [14217.727264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 timed out
> >> [14231.356054] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >> [14231.359188] wlan0: authenticated
> >> [14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83
> >> [14231.367102] wlan0: deauthenticated (Reason: 9)
> >>
> >
> > And we repeat this here.
> >
> >
> >> [14232.367277] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
> >> [14232.567284] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
> >> [14232.570837] wlan0 direct probe responded
> >> [14232.570843] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >> [14232.573250] wlan0: authenticated
> >> [14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83
> >> [14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83
> >> [14232.780130] wlan0: deauthenticated (Reason: 9)
> >>
> >
> > And here.
> >
> >
> >> [14233.780276] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
> >> [14233.784639] wlan0 direct probe responded
> >> [14233.784645] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >> [14233.799082] wlan0: authenticated
> >> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
> >>
> >> Access point in N mode only currently.
> >>
> >
> > Hm OK.
> >
> >
> >> Switching to mixture of N, G, B and dmesg throws this:
> >> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
> >> [14435.358964] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >> [14435.362920] wlan0: authenticated
> >> [14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83
> >> [14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
> >> status=0 aid=1)
> >> [14435.371752] wlan0: associated
> >> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> >> [14435.839637] wlan0: disassociated (Reason: 8)
> >>
> >
> > This is the STA has left. Hm, lets try upgrading your supplicant...
> > Can you try upgrading to the latest from git?
> >
> > git://w1.fi/srv/git/hostap.git
> >
> > Luis
> >
>
> Hello Luis.
> I have no idea what authentication you are talking about.
> I am sure that i dont use any authentication.
I'm talking about the 802.11 authentication which is always
required prior to association (even when no encryption is enabled).
Can you try a newer wpa_supplicant to see if that helps?
Luis
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-18 23:59 ` Luis R. Rodriguez
@ 2009-05-19 0:10 ` Luis R. Rodriguez
2009-05-19 0:24 ` Luis R. Rodriguez
2009-05-19 0:33 ` Dmitri Seletski
0 siblings, 2 replies; 39+ messages in thread
From: Luis R. Rodriguez @ 2009-05-19 0:10 UTC (permalink / raw)
To: ath9k-devel
On Mon, May 18, 2009 at 4:59 PM, Luis R. Rodriguez
<lrodriguez@atheros.com> wrote:
> On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri Seletski wrote:
>> Luis R. Rodriguez wrote:
>> > On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski <drjoms@gmail.com> wrote:
>> >
>> >
>> >> compat-wireless-2009-05-19 # grep CONFIG_MAC80211_DEFAULT_PS config.mk
>> >> CONFIG_MAC80211_DEFAULT_PS=n
>> >> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
>> >>
>> >> make :)
>> >>
>> >> make unload
>> >> make install
>> >> modprobe ath9k
>> >> ip link set wlan0 up
>> >> iwconfig wlan0 essid dlink
>> >>
>> >> last (IMHO)relevan't dmesg messages(got loads of dmesg history today)
>> >>
>> >>
>> >> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>> >> mem=0xffffc200114e0000, irq=19
>> >> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> >> [14216.110829] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>> >> [14216.310267] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>> >> [14216.316846] wlan0 direct probe responded
>> >> [14216.316848] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> >> [14216.320962] wlan0: authenticated
>> >> [14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83
>> >> [14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83
>> >> [14216.527099] wlan0: deauthenticated (Reason: 9)
>> >>
>> >
>> > I believe reason 9 is you're AP tells you that you are trying to
>> > associate to it without first having authenticated.
>> >
>> >
>> >> [14217.527273] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>> >> [14217.727264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 timed out
>> >> [14231.356054] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> >> [14231.359188] wlan0: authenticated
>> >> [14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83
>> >> [14231.367102] wlan0: deauthenticated (Reason: 9)
>> >>
>> >
>> > And we repeat this here.
>> >
>> >
>> >> [14232.367277] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>> >> [14232.567284] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>> >> [14232.570837] wlan0 direct probe responded
>> >> [14232.570843] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> >> [14232.573250] wlan0: authenticated
>> >> [14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83
>> >> [14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83
>> >> [14232.780130] wlan0: deauthenticated (Reason: 9)
>> >>
>> >
>> > And here.
>> >
>> >
>> >> [14233.780276] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>> >> [14233.784639] wlan0 direct probe responded
>> >> [14233.784645] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> >> [14233.799082] wlan0: authenticated
>> >> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>> >>
>> >> Access point in N mode only currently.
>> >>
>> >
>> > Hm OK.
>> >
>> >
>> >> Switching to mixture of N, G, B and dmesg throws this:
>> >> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>> >> [14435.358964] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> >> [14435.362920] wlan0: authenticated
>> >> [14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83
>> >> [14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
>> >> status=0 aid=1)
>> >> [14435.371752] wlan0: associated
>> >> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>> >> [14435.839637] wlan0: disassociated (Reason: 8)
>> >>
>> >
>> > This is the STA has left. Hm, ?lets try upgrading your supplicant...
>> > Can you try upgrading to the latest from git?
>> >
>> > git://w1.fi/srv/git/hostap.git
>> >
>> > ? Luis
>> >
>>
>> Hello Luis.
>> I have no idea what authentication you are talking about.
>> I am sure that i dont use any authentication.
>
> I'm talking about the 802.11 authentication which is always
> required prior to association (even when no encryption is enabled).
>
> Can you try a newer wpa_supplicant to see if that helps?
That is, use a plaintext supplicant as follows:
mcgrof at tesla ~ $ cat plaintext.conf
ctrl_interface=/var/run/wpa_supplicant
ap_scan=1
network={
key_mgmt=NONE
ssid="your-ssid"
scan_ssid=1
}
wpa_supplicant -i wlan0 -c plaintext.conf
Luis
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-19 0:10 ` Luis R. Rodriguez
@ 2009-05-19 0:24 ` Luis R. Rodriguez
2009-05-19 0:33 ` Dmitri Seletski
1 sibling, 0 replies; 39+ messages in thread
From: Luis R. Rodriguez @ 2009-05-19 0:24 UTC (permalink / raw)
To: ath9k-devel
On Mon, May 18, 2009 at 05:10:04PM -0700, Luis Rodriguez wrote:
> On Mon, May 18, 2009 at 4:59 PM, Luis R. Rodriguez
> <lrodriguez@atheros.com> wrote:
> > On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri Seletski wrote:
> >> Luis R. Rodriguez wrote:
> >> > On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski <drjoms@gmail.com> wrote:
> >> >
> >> >
> >> >> compat-wireless-2009-05-19 # grep CONFIG_MAC80211_DEFAULT_PS config.mk
> >> >> CONFIG_MAC80211_DEFAULT_PS=n
> >> >> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
> >> >>
> >> >> make :)
> >> >>
> >> >> make unload
> >> >> make install
> >> >> modprobe ath9k
> >> >> ip link set wlan0 up
> >> >> iwconfig wlan0 essid dlink
> >> >>
> >> >> last (IMHO)relevan't dmesg messages(got loads of dmesg history today)
> >> >>
> >> >>
> >> >> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
> >> >> mem=0xffffc200114e0000, irq=19
> >> >> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> >> >> [14216.110829] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
> >> >> [14216.310267] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
> >> >> [14216.316846] wlan0 direct probe responded
> >> >> [14216.316848] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >> >> [14216.320962] wlan0: authenticated
> >> >> [14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83
> >> >> [14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83
> >> >> [14216.527099] wlan0: deauthenticated (Reason: 9)
> >> >>
> >> >
> >> > I believe reason 9 is you're AP tells you that you are trying to
> >> > associate to it without first having authenticated.
> >> >
> >> >
> >> >> [14217.527273] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
> >> >> [14217.727264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 timed out
> >> >> [14231.356054] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >> >> [14231.359188] wlan0: authenticated
> >> >> [14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83
> >> >> [14231.367102] wlan0: deauthenticated (Reason: 9)
> >> >>
> >> >
> >> > And we repeat this here.
> >> >
> >> >
> >> >> [14232.367277] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
> >> >> [14232.567284] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
> >> >> [14232.570837] wlan0 direct probe responded
> >> >> [14232.570843] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >> >> [14232.573250] wlan0: authenticated
> >> >> [14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83
> >> >> [14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83
> >> >> [14232.780130] wlan0: deauthenticated (Reason: 9)
> >> >>
> >> >
> >> > And here.
> >> >
> >> >
> >> >> [14233.780276] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
> >> >> [14233.784639] wlan0 direct probe responded
> >> >> [14233.784645] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >> >> [14233.799082] wlan0: authenticated
> >> >> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
> >> >>
> >> >> Access point in N mode only currently.
> >> >>
> >> >
> >> > Hm OK.
> >> >
> >> >
> >> >> Switching to mixture of N, G, B and dmesg throws this:
> >> >> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
> >> >> [14435.358964] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >> >> [14435.362920] wlan0: authenticated
> >> >> [14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83
> >> >> [14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
> >> >> status=0 aid=1)
> >> >> [14435.371752] wlan0: associated
> >> >> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> >> >> [14435.839637] wlan0: disassociated (Reason: 8)
> >> >>
> >> >
> >> > This is the STA has left. Hm, lets try upgrading your supplicant...
> >> > Can you try upgrading to the latest from git?
> >> >
> >> > git://w1.fi/srv/git/hostap.git
> >> >
> >> > Luis
> >> >
> >>
> >> Hello Luis.
> >> I have no idea what authentication you are talking about.
> >> I am sure that i dont use any authentication.
> >
> > I'm talking about the 802.11 authentication which is always
> > required prior to association (even when no encryption is enabled).
> >
> > Can you try a newer wpa_supplicant to see if that helps?
>
> That is, use a plaintext supplicant as follows:
>
> mcgrof at tesla ~ $ cat plaintext.conf
> ctrl_interface=/var/run/wpa_supplicant
> ap_scan=1
> network={
> key_mgmt=NONE
> ssid="your-ssid"
> scan_ssid=1
> }
>
> wpa_supplicant -i wlan0 -c plaintext.conf
Hm yeah nevermind this should have no effect, plain old wext should
caused auth/assoc to go well.
Can you provide the output of the dmesg log by and running the same
commands (no wpa_supplicant) but first modprobe ath9k as follows:
modprobe ath9k debug=0x00000200
Luis
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-19 0:10 ` Luis R. Rodriguez
2009-05-19 0:24 ` Luis R. Rodriguez
@ 2009-05-19 0:33 ` Dmitri Seletski
2009-05-19 0:41 ` Luis R. Rodriguez
[not found] ` <4A2E8611.6010401@gmail.com>
1 sibling, 2 replies; 39+ messages in thread
From: Dmitri Seletski @ 2009-05-19 0:33 UTC (permalink / raw)
To: ath9k-devel
Luis R. Rodriguez wrote:
> On Mon, May 18, 2009 at 4:59 PM, Luis R. Rodriguez
> <lrodriguez@atheros.com> wrote:
>
>> On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri Seletski wrote:
>>
>>> Luis R. Rodriguez wrote:
>>>
>>>> On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski <drjoms@gmail.com> wrote:
>>>>
>>>>
>>>>
>>>>> compat-wireless-2009-05-19 # grep CONFIG_MAC80211_DEFAULT_PS config.mk
>>>>> CONFIG_MAC80211_DEFAULT_PS=n
>>>>> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
>>>>>
>>>>> make :)
>>>>>
>>>>> make unload
>>>>> make install
>>>>> modprobe ath9k
>>>>> ip link set wlan0 up
>>>>> iwconfig wlan0 essid dlink
>>>>>
>>>>> last (IMHO)relevan't dmesg messages(got loads of dmesg history today)
>>>>>
>>>>>
>>>>> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>>>>> mem=0xffffc200114e0000, irq=19
>>>>> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>>>>> [14216.110829] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>>>>> [14216.310267] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>>>>> [14216.316846] wlan0 direct probe responded
>>>>> [14216.316848] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>> [14216.320962] wlan0: authenticated
>>>>> [14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>> [14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>> [14216.527099] wlan0: deauthenticated (Reason: 9)
>>>>>
>>>>>
>>>> I believe reason 9 is you're AP tells you that you are trying to
>>>> associate to it without first having authenticated.
>>>>
>>>>
>>>>
>>>>> [14217.527273] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>>>>> [14217.727264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 timed out
>>>>> [14231.356054] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>> [14231.359188] wlan0: authenticated
>>>>> [14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>> [14231.367102] wlan0: deauthenticated (Reason: 9)
>>>>>
>>>>>
>>>> And we repeat this here.
>>>>
>>>>
>>>>
>>>>> [14232.367277] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>>>>> [14232.567284] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>>>>> [14232.570837] wlan0 direct probe responded
>>>>> [14232.570843] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>> [14232.573250] wlan0: authenticated
>>>>> [14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>> [14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>> [14232.780130] wlan0: deauthenticated (Reason: 9)
>>>>>
>>>>>
>>>> And here.
>>>>
>>>>
>>>>
>>>>> [14233.780276] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>>>>> [14233.784639] wlan0 direct probe responded
>>>>> [14233.784645] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>> [14233.799082] wlan0: authenticated
>>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>>>>
>>>>> Access point in N mode only currently.
>>>>>
>>>>>
>>>> Hm OK.
>>>>
>>>>
>>>>
>>>>> Switching to mixture of N, G, B and dmesg throws this:
>>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>>>> [14435.358964] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>> [14435.362920] wlan0: authenticated
>>>>> [14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>> [14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
>>>>> status=0 aid=1)
>>>>> [14435.371752] wlan0: associated
>>>>> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>>>>> [14435.839637] wlan0: disassociated (Reason: 8)
>>>>>
>>>>>
>>>> This is the STA has left. Hm, lets try upgrading your supplicant...
>>>> Can you try upgrading to the latest from git?
>>>>
>>>> git://w1.fi/srv/git/hostap.git
>>>>
>>>> Luis
>>>>
>>>>
>>> Hello Luis.
>>> I have no idea what authentication you are talking about.
>>> I am sure that i dont use any authentication.
>>>
>> I'm talking about the 802.11 authentication which is always
>> required prior to association (even when no encryption is enabled).
>>
>> Can you try a newer wpa_supplicant to see if that helps?
>>
>
> That is, use a plaintext supplicant as follows:
>
> mcgrof at tesla ~ $ cat plaintext.conf
> ctrl_interface=/var/run/wpa_supplicant
> ap_scan=1
> network={
> key_mgmt=NONE
> ssid="your-ssid"
> scan_ssid=1
> }
>
> wpa_supplicant -i wlan0 -c plaintext.conf
>
> Luis
>
Hello Luis.
ou man, you scared shi* out of me :)
dimko wpa_supplicant # modprobe -r ath9k
dimko wpa_supplicant # modprobe ath9k debug=0x00000200
[19251.514273] wlan0: deauthenticating by local choice (reason=3)
[19251.808278] ath9k 0000:01:07.0: PCI INT A disabled
[19251.808327] ath9k: Driver unloaded
[19288.173497] cfg80211: Calling CRDA to update world regulatory domain
[19288.277348] ath9k 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 19
(level, low) -> IRQ 19
[19288.703537] ath9k: Eeprom VER: 14, REV: 2
[19288.704291] ath: Country alpha2 being used: AM
[19288.704292] ath: Regpair detected: 0x30
[19288.704294] ath9k: Rate: 1Mbps, ratecode: 27
[19288.704295] ath9k: Rate: 2Mbps, ratecode: 26
[19288.704297] ath9k: Rate: 5Mbps, ratecode: 25
[19288.704298] ath9k: Rate: 11Mbps, ratecode: 24
[19288.704299] ath9k: Rate: 6Mbps, ratecode: 11
[19288.704300] ath9k: Rate: 9Mbps, ratecode: 15
[19288.704302] ath9k: Rate: 12Mbps, ratecode: 10
[19288.704303] ath9k: Rate: 18Mbps, ratecode: 14
[19288.704304] ath9k: Rate: 24Mbps, ratecode: 9
[19288.704305] ath9k: Rate: 36Mbps, ratecode: 13
[19288.704306] ath9k: Rate: 48Mbps, ratecode: 8
[19288.704307] ath9k: Rate: 54Mbps, ratecode: 12
[19288.704309] ath9k: Rate: 6Mbps, ratecode: 11
[19288.704310] ath9k: Rate: 9Mbps, ratecode: 15
[19288.704311] ath9k: Rate: 12Mbps, ratecode: 10
[19288.704312] ath9k: Rate: 18Mbps, ratecode: 14
[19288.704313] ath9k: Rate: 24Mbps, ratecode: 9
[19288.704315] ath9k: Rate: 36Mbps, ratecode: 13
[19288.704316] ath9k: Rate: 48Mbps, ratecode: 8
[19288.704317] ath9k: Rate: 54Mbps, ratecode: 12
[19288.704339] ath9k: tx DMA: 512 buffers 1 desc/buf
[19288.704379] ath9k: tx DMA map: ffff88009f400000 (77824) -> 0 (77824)
[19288.704406] ath9k: beacon DMA: 4 buffers 1 desc/buf
[19288.704408] ath9k: beacon DMA map: ffff88009f577000 (608) -> 0 (608)
[19288.704410] ath9k: cachelsz 64 rxbufsize 3904
[19288.704412] ath9k: rx DMA: 512 buffers 1 desc/buf
[19288.704455] ath9k: rx DMA map: ffff8800ac560000 (77824) -> 0 (77824)
[19288.707111] phy0: Selected rate control algorithm 'ath9k_rate_control'
[19288.707656] cfg80211: Calling CRDA for country: AM
[19288.707680] Registered led device: ath9k-phy0::radio
[19288.707689] Registered led device: ath9k-phy0::assoc
[19288.707699] Registered led device: ath9k-phy0::tx
[19288.707711] Registered led device: ath9k-phy0::rx
[19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
mem=0xffffc200114e0000, irq=19
ip link set wlan0 up
[19365.389282] ath9k: Starting driver with initial channel: 2412 MHz
[19365.393590] ath9k: Attach a VIF of type: 2
[19365.393828] ath9k: BSS Changed PREAMBLE 0
[19365.394016] ath9k: BSS Changed CTS PROT 0
[19365.404280] ath9k: Set HW RX filter: 0x0
[19365.404378] ath9k: Set channel: 2412 MHz
[19365.404382] ath9k: tx chmask: 1, rx chmask: 1
[19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
[19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
7, cw_max: 15, txop: 102
[19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
15, cw_max: 31, txop: 188
[19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
1023, cw_max: 31, txop: 0
[19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
1023, cw_max: 31, txop: 0
[19365.408487] ath9k: Set HW RX filter: 0x0
[19365.408514] ath9k: Set HW RX filter: 0x0
[19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19365.410990] ath9k: Set HW RX filter: 0x0
iwconfig wlan0 essid dlink
[19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
mem=0xffffc200114e0000, irq=19
[19365.389282] ath9k: Starting driver with initial channel: 2412 MHz
[19365.393590] ath9k: Attach a VIF of type: 2
[19365.393828] ath9k: BSS Changed PREAMBLE 0
[19365.394016] ath9k: BSS Changed CTS PROT 0
[19365.404280] ath9k: Set HW RX filter: 0x0
[19365.404378] ath9k: Set channel: 2412 MHz
[19365.404382] ath9k: tx chmask: 1, rx chmask: 1
[19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
[19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
7, cw_max: 15, txop: 102
[19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
15, cw_max: 31, txop: 188
[19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
1023, cw_max: 31, txop: 0
[19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
1023, cw_max: 31, txop: 0
[19365.408487] ath9k: Set HW RX filter: 0x0
[19365.408514] ath9k: Set HW RX filter: 0x0
[19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19365.410990] ath9k: Set HW RX filter: 0x0
[19457.759393] ath9k: Set HW RX filter: 0x10
[19457.789264] ath9k: Set channel: 2412 MHz
[19457.789270] ath9k: tx chmask: 1, rx chmask: 1
[19457.789373] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
[19457.853264] ath9k: Set channel: 2417 MHz
[19457.853269] ath9k: tx chmask: 1, rx chmask: 1
[19457.853363] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
[19457.914263] ath9k: Set channel: 2422 MHz
[19457.914268] ath9k: tx chmask: 1, rx chmask: 1
[19457.918980] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
[19457.980263] ath9k: Set channel: 2427 MHz
[19457.980268] ath9k: tx chmask: 1, rx chmask: 1
[19457.980363] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
[19458.041263] ath9k: Set channel: 2432 MHz
[19458.041268] ath9k: tx chmask: 1, rx chmask: 1
[19458.041363] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
[19458.102264] ath9k: Set channel: 2437 MHz
[19458.102271] ath9k: tx chmask: 1, rx chmask: 1
[19458.102368] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
[19458.163262] ath9k: Set channel: 2442 MHz
[19458.163267] ath9k: tx chmask: 1, rx chmask: 1
[19458.163360] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
[19458.235263] ath9k: Set channel: 2447 MHz
[19458.235269] ath9k: tx chmask: 1, rx chmask: 1
[19458.235450] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
[19458.296257] ath9k: Set channel: 2452 MHz
[19458.296258] ath9k: tx chmask: 1, rx chmask: 1
[19458.296344] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
[19458.357257] ath9k: Set channel: 2457 MHz
[19458.357258] ath9k: tx chmask: 1, rx chmask: 1
[19458.357344] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
[19458.418257] ath9k: Set channel: 2462 MHz
[19458.418258] ath9k: tx chmask: 1, rx chmask: 1
[19458.418344] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
[19458.479263] ath9k: Set channel: 2467 MHz
[19458.479267] ath9k: tx chmask: 1, rx chmask: 1
[19458.479362] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
[19458.680270] ath9k: Set channel: 2472 MHz
[19458.680280] ath9k: tx chmask: 1, rx chmask: 1
[19458.680381] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
[19458.881265] ath9k: Set channel: 2484 MHz
[19458.881270] ath9k: tx chmask: 1, rx chmask: 1
[19458.881367] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
[19459.082271] ath9k: Set channel: 2412 MHz
[19459.082278] ath9k: tx chmask: 1, rx chmask: 1
[19459.082452] ath9k: (2484 MHz) -> (2412 MHz), chanwidth: 0
[19459.084497] ath9k: Set HW RX filter: 0x0
[19459.085175] ath9k: Set channel: 2462 MHz
[19459.091031] ath9k: tx chmask: 1, rx chmask: 1
[19459.091252] ath9k: (2412 MHz) -> (2462 MHz), chanwidth: 0
[19459.095097] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
3, cw_max: 7, txop: 47
[19459.095114] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
7, cw_max: 15, txop: 94
[19459.095125] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
1023, cw_max: 15, txop: 0
[19459.095136] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
1023, cw_max: 15, txop: 0
[19459.095272] wlan0: authenticate with AP 00:1e:58:b4:f6:83
[19459.099880] wlan0: authenticated
[19459.099885] wlan0: associate with AP 00:1e:58:b4:f6:83
[19459.299265] wlan0: associate with AP 00:1e:58:b4:f6:83
[19459.306086] wlan0: deauthenticated (Reason: 9)
[19460.306269] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
[19460.316796] wlan0 direct probe responded
[19460.316801] wlan0: authenticate with AP 00:1e:58:b4:f6:83
[19460.319702] wlan0: authenticated
[19460.319707] wlan0: associate with AP 00:1e:58:b4:f6:83
[19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
this is while ap is in N mode.
This is after i set it mixed NBG:
[19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
[19601.885667] ath9k: Set HW RX filter: 0x10
[19601.917026] ath9k: Set channel: 2412 MHz
[19601.917034] ath9k: tx chmask: 1, rx chmask: 1
[19601.917192] ath9k: (2462 MHz) -> (2412 MHz), chanwidth: 0
[19601.978014] ath9k: Set channel: 2417 MHz
[19601.978019] ath9k: tx chmask: 1, rx chmask: 1
[19601.978114] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
[19602.039014] ath9k: Set channel: 2422 MHz
[19602.039018] ath9k: tx chmask: 1, rx chmask: 1
[19602.043759] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
[19602.104014] ath9k: Set channel: 2427 MHz
[19602.104019] ath9k: tx chmask: 1, rx chmask: 1
[19602.108744] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
[19602.169030] ath9k: Set channel: 2432 MHz
[19602.169040] ath9k: tx chmask: 1, rx chmask: 1
[19602.169144] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
[19602.230009] ath9k: Set channel: 2437 MHz
[19602.230012] ath9k: tx chmask: 1, rx chmask: 1
[19602.230100] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
[19602.291015] ath9k: Set channel: 2442 MHz
[19602.291019] ath9k: tx chmask: 1, rx chmask: 1
[19602.291110] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
[19602.352012] ath9k: Set channel: 2447 MHz
[19602.352016] ath9k: tx chmask: 1, rx chmask: 1
[19602.352107] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
[19602.413008] ath9k: Set channel: 2452 MHz
[19602.413010] ath9k: tx chmask: 1, rx chmask: 1
[19602.413097] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
[19602.474007] ath9k: Set channel: 2457 MHz
[19602.474009] ath9k: tx chmask: 1, rx chmask: 1
[19602.474519] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
[19602.535014] ath9k: Set channel: 2462 MHz
[19602.535019] ath9k: tx chmask: 1, rx chmask: 1
[19602.535115] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
[19602.596014] ath9k: Set channel: 2467 MHz
[19602.596019] ath9k: tx chmask: 1, rx chmask: 1
[19602.596115] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
[19602.797021] ath9k: Set channel: 2472 MHz
[19602.797032] ath9k: tx chmask: 1, rx chmask: 1
[19602.797136] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
[19602.998018] ath9k: Set channel: 2484 MHz
[19602.998025] ath9k: tx chmask: 1, rx chmask: 1
[19602.998124] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
[19603.199023] ath9k: Set channel: 2462 MHz
[19603.199031] ath9k: tx chmask: 1, rx chmask: 1
[19603.199198] ath9k: (2484 MHz) -> (2462 MHz), chanwidth: 0
[19603.200703] ath9k: Set HW RX filter: 0x0
[19603.200723] ath9k: Set channel: 2462 MHz
[19603.200728] ath9k: tx chmask: 1, rx chmask: 1
[19603.200893] ath9k: (2462 MHz) -> (2462 MHz), chanwidth: 0
[19603.205188] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
3, cw_max: 7, txop: 47
[19603.205203] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
7, cw_max: 15, txop: 94
[19603.205213] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
1023, cw_max: 15, txop: 0
[19603.205224] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
1023, cw_max: 15, txop: 0
[19603.205364] wlan0: authenticate with AP 00:1e:58:b4:f6:83
[19603.208182] wlan0: authenticated
[19603.208189] wlan0: associate with AP 00:1e:58:b4:f6:83
[19603.216915] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
status=0 aid=1)
[19603.216920] wlan0: associated
[19603.216952] ath9k: Choosing rate table for mode: 10
[19603.217411] ath9k: RC Initialized with capabilities: 0x0
[19603.217420] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
3, cw_max: 7, txop: 47
[19603.217437] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
7, cw_max: 15, txop: 94
[19603.217451] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
1023, cw_max: 15, txop: 0
[19603.217466] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
1023, cw_max: 15, txop: 0
[19603.217536] ath9k: RX filter 0x0 bssid 00:1e:58:b4:f6:83 aid 0x0
[19603.217541] ath9k: BSS Changed PREAMBLE 1
[19603.217546] ath9k: BSS Changed ASSOC 1
[19603.217550] ath9k: Bss Info ASSOC 1, bssid: 00:1e:58:b4:f6:83
[19603.218918] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[19603.218977] ath9k: Set HW RX filter: 0x0
I am off to bed, i live in GMT0(+1) time zone
Hopefully see ya tomorrow.
Is there an IRC channel or anything? this is just slow.
Regards
Dmitri
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-19 0:33 ` Dmitri Seletski
@ 2009-05-19 0:41 ` Luis R. Rodriguez
2009-05-19 18:55 ` Dmitri Seletski
[not found] ` <4A2E8611.6010401@gmail.com>
1 sibling, 1 reply; 39+ messages in thread
From: Luis R. Rodriguez @ 2009-05-19 0:41 UTC (permalink / raw)
To: ath9k-devel
On Mon, May 18, 2009 at 05:33:23PM -0700, Dmitri Seletski wrote:
> Luis R. Rodriguez wrote:
> > On Mon, May 18, 2009 at 4:59 PM, Luis R. Rodriguez
> > <lrodriguez@atheros.com> wrote:
> >
> >> On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri Seletski wrote:
> >>
> >>> Luis R. Rodriguez wrote:
> >>>
> >>>> On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski <drjoms@gmail.com> wrote:
> >>>>
> >>>>
> >>>>
> >>>>> compat-wireless-2009-05-19 # grep CONFIG_MAC80211_DEFAULT_PS config.mk
> >>>>> CONFIG_MAC80211_DEFAULT_PS=n
> >>>>> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
> >>>>>
> >>>>> make :)
> >>>>>
> >>>>> make unload
> >>>>> make install
> >>>>> modprobe ath9k
> >>>>> ip link set wlan0 up
> >>>>> iwconfig wlan0 essid dlink
> >>>>>
> >>>>> last (IMHO)relevan't dmesg messages(got loads of dmesg history today)
> >>>>>
> >>>>>
> >>>>> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
> >>>>> mem=0xffffc200114e0000, irq=19
> >>>>> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> >>>>> [14216.110829] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
> >>>>> [14216.310267] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
> >>>>> [14216.316846] wlan0 direct probe responded
> >>>>> [14216.316848] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >>>>> [14216.320962] wlan0: authenticated
> >>>>> [14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>> [14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>> [14216.527099] wlan0: deauthenticated (Reason: 9)
> >>>>>
> >>>>>
> >>>> I believe reason 9 is you're AP tells you that you are trying to
> >>>> associate to it without first having authenticated.
> >>>>
> >>>>
> >>>>
> >>>>> [14217.527273] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
> >>>>> [14217.727264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 timed out
> >>>>> [14231.356054] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >>>>> [14231.359188] wlan0: authenticated
> >>>>> [14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>> [14231.367102] wlan0: deauthenticated (Reason: 9)
> >>>>>
> >>>>>
> >>>> And we repeat this here.
> >>>>
> >>>>
> >>>>
> >>>>> [14232.367277] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
> >>>>> [14232.567284] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
> >>>>> [14232.570837] wlan0 direct probe responded
> >>>>> [14232.570843] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >>>>> [14232.573250] wlan0: authenticated
> >>>>> [14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>> [14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>> [14232.780130] wlan0: deauthenticated (Reason: 9)
> >>>>>
> >>>>>
> >>>> And here.
> >>>>
> >>>>
> >>>>
> >>>>> [14233.780276] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
> >>>>> [14233.784639] wlan0 direct probe responded
> >>>>> [14233.784645] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >>>>> [14233.799082] wlan0: authenticated
> >>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
> >>>>>
> >>>>> Access point in N mode only currently.
> >>>>>
> >>>>>
> >>>> Hm OK.
> >>>>
> >>>>
> >>>>
> >>>>> Switching to mixture of N, G, B and dmesg throws this:
> >>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
> >>>>> [14435.358964] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >>>>> [14435.362920] wlan0: authenticated
> >>>>> [14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>> [14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
> >>>>> status=0 aid=1)
> >>>>> [14435.371752] wlan0: associated
> >>>>> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> >>>>> [14435.839637] wlan0: disassociated (Reason: 8)
> >>>>>
> >>>>>
> >>>> This is the STA has left. Hm, lets try upgrading your supplicant...
> >>>> Can you try upgrading to the latest from git?
> >>>>
> >>>> git://w1.fi/srv/git/hostap.git
> >>>>
> >>>> Luis
> >>>>
> >>>>
> >>> Hello Luis.
> >>> I have no idea what authentication you are talking about.
> >>> I am sure that i dont use any authentication.
> >>>
> >> I'm talking about the 802.11 authentication which is always
> >> required prior to association (even when no encryption is enabled).
> >>
> >> Can you try a newer wpa_supplicant to see if that helps?
> >>
> >
> > That is, use a plaintext supplicant as follows:
> >
> > mcgrof at tesla ~ $ cat plaintext.conf
> > ctrl_interface=/var/run/wpa_supplicant
> > ap_scan=1
> > network={
> > key_mgmt=NONE
> > ssid="your-ssid"
> > scan_ssid=1
> > }
> >
> > wpa_supplicant -i wlan0 -c plaintext.conf
> >
> > Luis
> >
> Hello Luis.
>
> ou man, you scared shi* out of me :)
>
>
> dimko wpa_supplicant # modprobe -r ath9k
> dimko wpa_supplicant # modprobe ath9k debug=0x00000200
>
>
> [19251.514273] wlan0: deauthenticating by local choice (reason=3)
> [19251.808278] ath9k 0000:01:07.0: PCI INT A disabled
> [19251.808327] ath9k: Driver unloaded
> [19288.173497] cfg80211: Calling CRDA to update world regulatory domain
> [19288.277348] ath9k 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 19
> (level, low) -> IRQ 19
> [19288.703537] ath9k: Eeprom VER: 14, REV: 2
> [19288.704291] ath: Country alpha2 being used: AM
> [19288.704292] ath: Regpair detected: 0x30
> [19288.704294] ath9k: Rate: 1Mbps, ratecode: 27
> [19288.704295] ath9k: Rate: 2Mbps, ratecode: 26
> [19288.704297] ath9k: Rate: 5Mbps, ratecode: 25
> [19288.704298] ath9k: Rate: 11Mbps, ratecode: 24
> [19288.704299] ath9k: Rate: 6Mbps, ratecode: 11
> [19288.704300] ath9k: Rate: 9Mbps, ratecode: 15
> [19288.704302] ath9k: Rate: 12Mbps, ratecode: 10
> [19288.704303] ath9k: Rate: 18Mbps, ratecode: 14
> [19288.704304] ath9k: Rate: 24Mbps, ratecode: 9
> [19288.704305] ath9k: Rate: 36Mbps, ratecode: 13
> [19288.704306] ath9k: Rate: 48Mbps, ratecode: 8
> [19288.704307] ath9k: Rate: 54Mbps, ratecode: 12
> [19288.704309] ath9k: Rate: 6Mbps, ratecode: 11
> [19288.704310] ath9k: Rate: 9Mbps, ratecode: 15
> [19288.704311] ath9k: Rate: 12Mbps, ratecode: 10
> [19288.704312] ath9k: Rate: 18Mbps, ratecode: 14
> [19288.704313] ath9k: Rate: 24Mbps, ratecode: 9
> [19288.704315] ath9k: Rate: 36Mbps, ratecode: 13
> [19288.704316] ath9k: Rate: 48Mbps, ratecode: 8
> [19288.704317] ath9k: Rate: 54Mbps, ratecode: 12
> [19288.704339] ath9k: tx DMA: 512 buffers 1 desc/buf
> [19288.704379] ath9k: tx DMA map: ffff88009f400000 (77824) -> 0 (77824)
> [19288.704406] ath9k: beacon DMA: 4 buffers 1 desc/buf
> [19288.704408] ath9k: beacon DMA map: ffff88009f577000 (608) -> 0 (608)
> [19288.704410] ath9k: cachelsz 64 rxbufsize 3904
> [19288.704412] ath9k: rx DMA: 512 buffers 1 desc/buf
> [19288.704455] ath9k: rx DMA map: ffff8800ac560000 (77824) -> 0 (77824)
> [19288.707111] phy0: Selected rate control algorithm 'ath9k_rate_control'
> [19288.707656] cfg80211: Calling CRDA for country: AM
> [19288.707680] Registered led device: ath9k-phy0::radio
> [19288.707689] Registered led device: ath9k-phy0::assoc
> [19288.707699] Registered led device: ath9k-phy0::tx
> [19288.707711] Registered led device: ath9k-phy0::rx
> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
> mem=0xffffc200114e0000, irq=19
>
>
> ip link set wlan0 up
>
> [19365.389282] ath9k: Starting driver with initial channel: 2412 MHz
> [19365.393590] ath9k: Attach a VIF of type: 2
> [19365.393828] ath9k: BSS Changed PREAMBLE 0
> [19365.394016] ath9k: BSS Changed CTS PROT 0
> [19365.404280] ath9k: Set HW RX filter: 0x0
> [19365.404378] ath9k: Set channel: 2412 MHz
> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
> 7, cw_max: 15, txop: 102
> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
> 15, cw_max: 31, txop: 188
> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
> 1023, cw_max: 31, txop: 0
> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
> 1023, cw_max: 31, txop: 0
> [19365.408487] ath9k: Set HW RX filter: 0x0
> [19365.408514] ath9k: Set HW RX filter: 0x0
> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [19365.410990] ath9k: Set HW RX filter: 0x0
>
> iwconfig wlan0 essid dlink
> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
> mem=0xffffc200114e0000, irq=19
> [19365.389282] ath9k: Starting driver with initial channel: 2412 MHz
> [19365.393590] ath9k: Attach a VIF of type: 2
> [19365.393828] ath9k: BSS Changed PREAMBLE 0
> [19365.394016] ath9k: BSS Changed CTS PROT 0
> [19365.404280] ath9k: Set HW RX filter: 0x0
> [19365.404378] ath9k: Set channel: 2412 MHz
> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
> 7, cw_max: 15, txop: 102
> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
> 15, cw_max: 31, txop: 188
> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
> 1023, cw_max: 31, txop: 0
> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
> 1023, cw_max: 31, txop: 0
> [19365.408487] ath9k: Set HW RX filter: 0x0
> [19365.408514] ath9k: Set HW RX filter: 0x0
> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [19365.410990] ath9k: Set HW RX filter: 0x0
> [19457.759393] ath9k: Set HW RX filter: 0x10
> [19457.789264] ath9k: Set channel: 2412 MHz
> [19457.789270] ath9k: tx chmask: 1, rx chmask: 1
> [19457.789373] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
> [19457.853264] ath9k: Set channel: 2417 MHz
> [19457.853269] ath9k: tx chmask: 1, rx chmask: 1
> [19457.853363] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
> [19457.914263] ath9k: Set channel: 2422 MHz
> [19457.914268] ath9k: tx chmask: 1, rx chmask: 1
> [19457.918980] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
> [19457.980263] ath9k: Set channel: 2427 MHz
> [19457.980268] ath9k: tx chmask: 1, rx chmask: 1
> [19457.980363] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
> [19458.041263] ath9k: Set channel: 2432 MHz
> [19458.041268] ath9k: tx chmask: 1, rx chmask: 1
> [19458.041363] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
> [19458.102264] ath9k: Set channel: 2437 MHz
> [19458.102271] ath9k: tx chmask: 1, rx chmask: 1
> [19458.102368] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
> [19458.163262] ath9k: Set channel: 2442 MHz
> [19458.163267] ath9k: tx chmask: 1, rx chmask: 1
> [19458.163360] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
> [19458.235263] ath9k: Set channel: 2447 MHz
> [19458.235269] ath9k: tx chmask: 1, rx chmask: 1
> [19458.235450] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
> [19458.296257] ath9k: Set channel: 2452 MHz
> [19458.296258] ath9k: tx chmask: 1, rx chmask: 1
> [19458.296344] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
> [19458.357257] ath9k: Set channel: 2457 MHz
> [19458.357258] ath9k: tx chmask: 1, rx chmask: 1
> [19458.357344] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
> [19458.418257] ath9k: Set channel: 2462 MHz
> [19458.418258] ath9k: tx chmask: 1, rx chmask: 1
> [19458.418344] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
> [19458.479263] ath9k: Set channel: 2467 MHz
> [19458.479267] ath9k: tx chmask: 1, rx chmask: 1
> [19458.479362] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
> [19458.680270] ath9k: Set channel: 2472 MHz
> [19458.680280] ath9k: tx chmask: 1, rx chmask: 1
> [19458.680381] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
> [19458.881265] ath9k: Set channel: 2484 MHz
> [19458.881270] ath9k: tx chmask: 1, rx chmask: 1
> [19458.881367] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
> [19459.082271] ath9k: Set channel: 2412 MHz
> [19459.082278] ath9k: tx chmask: 1, rx chmask: 1
> [19459.082452] ath9k: (2484 MHz) -> (2412 MHz), chanwidth: 0
> [19459.084497] ath9k: Set HW RX filter: 0x0
> [19459.085175] ath9k: Set channel: 2462 MHz
> [19459.091031] ath9k: tx chmask: 1, rx chmask: 1
> [19459.091252] ath9k: (2412 MHz) -> (2462 MHz), chanwidth: 0
> [19459.095097] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
> 3, cw_max: 7, txop: 47
> [19459.095114] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
> 7, cw_max: 15, txop: 94
> [19459.095125] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
> 1023, cw_max: 15, txop: 0
> [19459.095136] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
> 1023, cw_max: 15, txop: 0
> [19459.095272] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> [19459.099880] wlan0: authenticated
> [19459.099885] wlan0: associate with AP 00:1e:58:b4:f6:83
> [19459.299265] wlan0: associate with AP 00:1e:58:b4:f6:83
> [19459.306086] wlan0: deauthenticated (Reason: 9)
> [19460.306269] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
> [19460.316796] wlan0 direct probe responded
> [19460.316801] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> [19460.319702] wlan0: authenticated
> [19460.319707] wlan0: associate with AP 00:1e:58:b4:f6:83
> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>
>
> this is while ap is in N mode.
>
> This is after i set it mixed NBG:
>
>
> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
> [19601.885667] ath9k: Set HW RX filter: 0x10
> [19601.917026] ath9k: Set channel: 2412 MHz
> [19601.917034] ath9k: tx chmask: 1, rx chmask: 1
> [19601.917192] ath9k: (2462 MHz) -> (2412 MHz), chanwidth: 0
> [19601.978014] ath9k: Set channel: 2417 MHz
> [19601.978019] ath9k: tx chmask: 1, rx chmask: 1
> [19601.978114] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
> [19602.039014] ath9k: Set channel: 2422 MHz
> [19602.039018] ath9k: tx chmask: 1, rx chmask: 1
> [19602.043759] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
> [19602.104014] ath9k: Set channel: 2427 MHz
> [19602.104019] ath9k: tx chmask: 1, rx chmask: 1
> [19602.108744] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
> [19602.169030] ath9k: Set channel: 2432 MHz
> [19602.169040] ath9k: tx chmask: 1, rx chmask: 1
> [19602.169144] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
> [19602.230009] ath9k: Set channel: 2437 MHz
> [19602.230012] ath9k: tx chmask: 1, rx chmask: 1
> [19602.230100] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
> [19602.291015] ath9k: Set channel: 2442 MHz
> [19602.291019] ath9k: tx chmask: 1, rx chmask: 1
> [19602.291110] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
> [19602.352012] ath9k: Set channel: 2447 MHz
> [19602.352016] ath9k: tx chmask: 1, rx chmask: 1
> [19602.352107] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
> [19602.413008] ath9k: Set channel: 2452 MHz
> [19602.413010] ath9k: tx chmask: 1, rx chmask: 1
> [19602.413097] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
> [19602.474007] ath9k: Set channel: 2457 MHz
> [19602.474009] ath9k: tx chmask: 1, rx chmask: 1
> [19602.474519] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
> [19602.535014] ath9k: Set channel: 2462 MHz
> [19602.535019] ath9k: tx chmask: 1, rx chmask: 1
> [19602.535115] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
> [19602.596014] ath9k: Set channel: 2467 MHz
> [19602.596019] ath9k: tx chmask: 1, rx chmask: 1
> [19602.596115] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
> [19602.797021] ath9k: Set channel: 2472 MHz
> [19602.797032] ath9k: tx chmask: 1, rx chmask: 1
> [19602.797136] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
> [19602.998018] ath9k: Set channel: 2484 MHz
> [19602.998025] ath9k: tx chmask: 1, rx chmask: 1
> [19602.998124] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
> [19603.199023] ath9k: Set channel: 2462 MHz
> [19603.199031] ath9k: tx chmask: 1, rx chmask: 1
> [19603.199198] ath9k: (2484 MHz) -> (2462 MHz), chanwidth: 0
> [19603.200703] ath9k: Set HW RX filter: 0x0
> [19603.200723] ath9k: Set channel: 2462 MHz
> [19603.200728] ath9k: tx chmask: 1, rx chmask: 1
> [19603.200893] ath9k: (2462 MHz) -> (2462 MHz), chanwidth: 0
> [19603.205188] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
> 3, cw_max: 7, txop: 47
> [19603.205203] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
> 7, cw_max: 15, txop: 94
> [19603.205213] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
> 1023, cw_max: 15, txop: 0
> [19603.205224] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
> 1023, cw_max: 15, txop: 0
> [19603.205364] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> [19603.208182] wlan0: authenticated
> [19603.208189] wlan0: associate with AP 00:1e:58:b4:f6:83
> [19603.216915] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
> status=0 aid=1)
> [19603.216920] wlan0: associated
> [19603.216952] ath9k: Choosing rate table for mode: 10
> [19603.217411] ath9k: RC Initialized with capabilities: 0x0
> [19603.217420] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
> 3, cw_max: 7, txop: 47
> [19603.217437] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
> 7, cw_max: 15, txop: 94
> [19603.217451] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
> 1023, cw_max: 15, txop: 0
> [19603.217466] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
> 1023, cw_max: 15, txop: 0
> [19603.217536] ath9k: RX filter 0x0 bssid 00:1e:58:b4:f6:83 aid 0x0
> [19603.217541] ath9k: BSS Changed PREAMBLE 1
> [19603.217546] ath9k: BSS Changed ASSOC 1
> [19603.217550] ath9k: Bss Info ASSOC 1, bssid: 00:1e:58:b4:f6:83
> [19603.218918] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [19603.218977] ath9k: Set HW RX filter: 0x0
>
>
> I am off to bed, i live in GMT0(+1) time zone
> Hopefully see ya tomorrow.
> Is there an IRC channel or anything? this is just slow.
> Regards
> Dmitri
Please try with:
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
I'd like to see what else mac80211 gives out.
Luis
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-19 0:41 ` Luis R. Rodriguez
@ 2009-05-19 18:55 ` Dmitri Seletski
2009-05-26 21:42 ` Luis R. Rodriguez
0 siblings, 1 reply; 39+ messages in thread
From: Dmitri Seletski @ 2009-05-19 18:55 UTC (permalink / raw)
To: ath9k-devel
Luis R. Rodriguez wrote:
> On Mon, May 18, 2009 at 05:33:23PM -0700, Dmitri Seletski wrote:
>
>> Luis R. Rodriguez wrote:
>>
>>> On Mon, May 18, 2009 at 4:59 PM, Luis R. Rodriguez
>>> <lrodriguez@atheros.com> wrote:
>>>
>>>
>>>> On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri Seletski wrote:
>>>>
>>>>
>>>>> Luis R. Rodriguez wrote:
>>>>>
>>>>>
>>>>>> On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski <drjoms@gmail.com> wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> compat-wireless-2009-05-19 # grep CONFIG_MAC80211_DEFAULT_PS config.mk
>>>>>>> CONFIG_MAC80211_DEFAULT_PS=n
>>>>>>> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
>>>>>>>
>>>>>>> make :)
>>>>>>>
>>>>>>> make unload
>>>>>>> make install
>>>>>>> modprobe ath9k
>>>>>>> ip link set wlan0 up
>>>>>>> iwconfig wlan0 essid dlink
>>>>>>>
>>>>>>> last (IMHO)relevan't dmesg messages(got loads of dmesg history today)
>>>>>>>
>>>>>>>
>>>>>>> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>>>>>>> mem=0xffffc200114e0000, irq=19
>>>>>>> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>>>>>>> [14216.110829] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>>>>>>> [14216.310267] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>>>>>>> [14216.316846] wlan0 direct probe responded
>>>>>>> [14216.316848] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>> [14216.320962] wlan0: authenticated
>>>>>>> [14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>> [14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>> [14216.527099] wlan0: deauthenticated (Reason: 9)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> I believe reason 9 is you're AP tells you that you are trying to
>>>>>> associate to it without first having authenticated.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> [14217.527273] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>>>>>>> [14217.727264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 timed out
>>>>>>> [14231.356054] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>> [14231.359188] wlan0: authenticated
>>>>>>> [14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>> [14231.367102] wlan0: deauthenticated (Reason: 9)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> And we repeat this here.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> [14232.367277] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>>>>>>> [14232.567284] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>>>>>>> [14232.570837] wlan0 direct probe responded
>>>>>>> [14232.570843] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>> [14232.573250] wlan0: authenticated
>>>>>>> [14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>> [14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>> [14232.780130] wlan0: deauthenticated (Reason: 9)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> And here.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> [14233.780276] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>>>>>>> [14233.784639] wlan0 direct probe responded
>>>>>>> [14233.784645] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>> [14233.799082] wlan0: authenticated
>>>>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>>>>>>
>>>>>>> Access point in N mode only currently.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> Hm OK.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Switching to mixture of N, G, B and dmesg throws this:
>>>>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>>>>>> [14435.358964] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>> [14435.362920] wlan0: authenticated
>>>>>>> [14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>> [14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
>>>>>>> status=0 aid=1)
>>>>>>> [14435.371752] wlan0: associated
>>>>>>> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>>>>>>> [14435.839637] wlan0: disassociated (Reason: 8)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> This is the STA has left. Hm, lets try upgrading your supplicant...
>>>>>> Can you try upgrading to the latest from git?
>>>>>>
>>>>>> git://w1.fi/srv/git/hostap.git
>>>>>>
>>>>>> Luis
>>>>>>
>>>>>>
>>>>>>
>>>>> Hello Luis.
>>>>> I have no idea what authentication you are talking about.
>>>>> I am sure that i dont use any authentication.
>>>>>
>>>>>
>>>> I'm talking about the 802.11 authentication which is always
>>>> required prior to association (even when no encryption is enabled).
>>>>
>>>> Can you try a newer wpa_supplicant to see if that helps?
>>>>
>>>>
>>> That is, use a plaintext supplicant as follows:
>>>
>>> mcgrof at tesla ~ $ cat plaintext.conf
>>> ctrl_interface=/var/run/wpa_supplicant
>>> ap_scan=1
>>> network={
>>> key_mgmt=NONE
>>> ssid="your-ssid"
>>> scan_ssid=1
>>> }
>>>
>>> wpa_supplicant -i wlan0 -c plaintext.conf
>>>
>>> Luis
>>>
>>>
>> Hello Luis.
>>
>> ou man, you scared shi* out of me :)
>>
>>
>> dimko wpa_supplicant # modprobe -r ath9k
>> dimko wpa_supplicant # modprobe ath9k debug=0x00000200
>>
>>
>> [19251.514273] wlan0: deauthenticating by local choice (reason=3)
>> [19251.808278] ath9k 0000:01:07.0: PCI INT A disabled
>> [19251.808327] ath9k: Driver unloaded
>> [19288.173497] cfg80211: Calling CRDA to update world regulatory domain
>> [19288.277348] ath9k 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 19
>> (level, low) -> IRQ 19
>> [19288.703537] ath9k: Eeprom VER: 14, REV: 2
>> [19288.704291] ath: Country alpha2 being used: AM
>> [19288.704292] ath: Regpair detected: 0x30
>> [19288.704294] ath9k: Rate: 1Mbps, ratecode: 27
>> [19288.704295] ath9k: Rate: 2Mbps, ratecode: 26
>> [19288.704297] ath9k: Rate: 5Mbps, ratecode: 25
>> [19288.704298] ath9k: Rate: 11Mbps, ratecode: 24
>> [19288.704299] ath9k: Rate: 6Mbps, ratecode: 11
>> [19288.704300] ath9k: Rate: 9Mbps, ratecode: 15
>> [19288.704302] ath9k: Rate: 12Mbps, ratecode: 10
>> [19288.704303] ath9k: Rate: 18Mbps, ratecode: 14
>> [19288.704304] ath9k: Rate: 24Mbps, ratecode: 9
>> [19288.704305] ath9k: Rate: 36Mbps, ratecode: 13
>> [19288.704306] ath9k: Rate: 48Mbps, ratecode: 8
>> [19288.704307] ath9k: Rate: 54Mbps, ratecode: 12
>> [19288.704309] ath9k: Rate: 6Mbps, ratecode: 11
>> [19288.704310] ath9k: Rate: 9Mbps, ratecode: 15
>> [19288.704311] ath9k: Rate: 12Mbps, ratecode: 10
>> [19288.704312] ath9k: Rate: 18Mbps, ratecode: 14
>> [19288.704313] ath9k: Rate: 24Mbps, ratecode: 9
>> [19288.704315] ath9k: Rate: 36Mbps, ratecode: 13
>> [19288.704316] ath9k: Rate: 48Mbps, ratecode: 8
>> [19288.704317] ath9k: Rate: 54Mbps, ratecode: 12
>> [19288.704339] ath9k: tx DMA: 512 buffers 1 desc/buf
>> [19288.704379] ath9k: tx DMA map: ffff88009f400000 (77824) -> 0 (77824)
>> [19288.704406] ath9k: beacon DMA: 4 buffers 1 desc/buf
>> [19288.704408] ath9k: beacon DMA map: ffff88009f577000 (608) -> 0 (608)
>> [19288.704410] ath9k: cachelsz 64 rxbufsize 3904
>> [19288.704412] ath9k: rx DMA: 512 buffers 1 desc/buf
>> [19288.704455] ath9k: rx DMA map: ffff8800ac560000 (77824) -> 0 (77824)
>> [19288.707111] phy0: Selected rate control algorithm 'ath9k_rate_control'
>> [19288.707656] cfg80211: Calling CRDA for country: AM
>> [19288.707680] Registered led device: ath9k-phy0::radio
>> [19288.707689] Registered led device: ath9k-phy0::assoc
>> [19288.707699] Registered led device: ath9k-phy0::tx
>> [19288.707711] Registered led device: ath9k-phy0::rx
>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>> mem=0xffffc200114e0000, irq=19
>>
>>
>> ip link set wlan0 up
>>
>> [19365.389282] ath9k: Starting driver with initial channel: 2412 MHz
>> [19365.393590] ath9k: Attach a VIF of type: 2
>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
>> [19365.394016] ath9k: BSS Changed CTS PROT 0
>> [19365.404280] ath9k: Set HW RX filter: 0x0
>> [19365.404378] ath9k: Set channel: 2412 MHz
>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
>> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
>> 7, cw_max: 15, txop: 102
>> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
>> 15, cw_max: 31, txop: 188
>> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
>> 1023, cw_max: 31, txop: 0
>> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
>> 1023, cw_max: 31, txop: 0
>> [19365.408487] ath9k: Set HW RX filter: 0x0
>> [19365.408514] ath9k: Set HW RX filter: 0x0
>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> [19365.410990] ath9k: Set HW RX filter: 0x0
>>
>> iwconfig wlan0 essid dlink
>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>> mem=0xffffc200114e0000, irq=19
>> [19365.389282] ath9k: Starting driver with initial channel: 2412 MHz
>> [19365.393590] ath9k: Attach a VIF of type: 2
>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
>> [19365.394016] ath9k: BSS Changed CTS PROT 0
>> [19365.404280] ath9k: Set HW RX filter: 0x0
>> [19365.404378] ath9k: Set channel: 2412 MHz
>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
>> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
>> 7, cw_max: 15, txop: 102
>> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
>> 15, cw_max: 31, txop: 188
>> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
>> 1023, cw_max: 31, txop: 0
>> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
>> 1023, cw_max: 31, txop: 0
>> [19365.408487] ath9k: Set HW RX filter: 0x0
>> [19365.408514] ath9k: Set HW RX filter: 0x0
>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> [19365.410990] ath9k: Set HW RX filter: 0x0
>> [19457.759393] ath9k: Set HW RX filter: 0x10
>> [19457.789264] ath9k: Set channel: 2412 MHz
>> [19457.789270] ath9k: tx chmask: 1, rx chmask: 1
>> [19457.789373] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
>> [19457.853264] ath9k: Set channel: 2417 MHz
>> [19457.853269] ath9k: tx chmask: 1, rx chmask: 1
>> [19457.853363] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
>> [19457.914263] ath9k: Set channel: 2422 MHz
>> [19457.914268] ath9k: tx chmask: 1, rx chmask: 1
>> [19457.918980] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
>> [19457.980263] ath9k: Set channel: 2427 MHz
>> [19457.980268] ath9k: tx chmask: 1, rx chmask: 1
>> [19457.980363] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
>> [19458.041263] ath9k: Set channel: 2432 MHz
>> [19458.041268] ath9k: tx chmask: 1, rx chmask: 1
>> [19458.041363] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
>> [19458.102264] ath9k: Set channel: 2437 MHz
>> [19458.102271] ath9k: tx chmask: 1, rx chmask: 1
>> [19458.102368] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
>> [19458.163262] ath9k: Set channel: 2442 MHz
>> [19458.163267] ath9k: tx chmask: 1, rx chmask: 1
>> [19458.163360] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
>> [19458.235263] ath9k: Set channel: 2447 MHz
>> [19458.235269] ath9k: tx chmask: 1, rx chmask: 1
>> [19458.235450] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
>> [19458.296257] ath9k: Set channel: 2452 MHz
>> [19458.296258] ath9k: tx chmask: 1, rx chmask: 1
>> [19458.296344] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
>> [19458.357257] ath9k: Set channel: 2457 MHz
>> [19458.357258] ath9k: tx chmask: 1, rx chmask: 1
>> [19458.357344] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
>> [19458.418257] ath9k: Set channel: 2462 MHz
>> [19458.418258] ath9k: tx chmask: 1, rx chmask: 1
>> [19458.418344] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
>> [19458.479263] ath9k: Set channel: 2467 MHz
>> [19458.479267] ath9k: tx chmask: 1, rx chmask: 1
>> [19458.479362] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
>> [19458.680270] ath9k: Set channel: 2472 MHz
>> [19458.680280] ath9k: tx chmask: 1, rx chmask: 1
>> [19458.680381] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
>> [19458.881265] ath9k: Set channel: 2484 MHz
>> [19458.881270] ath9k: tx chmask: 1, rx chmask: 1
>> [19458.881367] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
>> [19459.082271] ath9k: Set channel: 2412 MHz
>> [19459.082278] ath9k: tx chmask: 1, rx chmask: 1
>> [19459.082452] ath9k: (2484 MHz) -> (2412 MHz), chanwidth: 0
>> [19459.084497] ath9k: Set HW RX filter: 0x0
>> [19459.085175] ath9k: Set channel: 2462 MHz
>> [19459.091031] ath9k: tx chmask: 1, rx chmask: 1
>> [19459.091252] ath9k: (2412 MHz) -> (2462 MHz), chanwidth: 0
>> [19459.095097] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
>> 3, cw_max: 7, txop: 47
>> [19459.095114] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
>> 7, cw_max: 15, txop: 94
>> [19459.095125] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
>> 1023, cw_max: 15, txop: 0
>> [19459.095136] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
>> 1023, cw_max: 15, txop: 0
>> [19459.095272] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> [19459.099880] wlan0: authenticated
>> [19459.099885] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [19459.299265] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [19459.306086] wlan0: deauthenticated (Reason: 9)
>> [19460.306269] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>> [19460.316796] wlan0 direct probe responded
>> [19460.316801] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> [19460.319702] wlan0: authenticated
>> [19460.319707] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>
>>
>> this is while ap is in N mode.
>>
>> This is after i set it mixed NBG:
>>
>>
>> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>> [19601.885667] ath9k: Set HW RX filter: 0x10
>> [19601.917026] ath9k: Set channel: 2412 MHz
>> [19601.917034] ath9k: tx chmask: 1, rx chmask: 1
>> [19601.917192] ath9k: (2462 MHz) -> (2412 MHz), chanwidth: 0
>> [19601.978014] ath9k: Set channel: 2417 MHz
>> [19601.978019] ath9k: tx chmask: 1, rx chmask: 1
>> [19601.978114] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
>> [19602.039014] ath9k: Set channel: 2422 MHz
>> [19602.039018] ath9k: tx chmask: 1, rx chmask: 1
>> [19602.043759] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
>> [19602.104014] ath9k: Set channel: 2427 MHz
>> [19602.104019] ath9k: tx chmask: 1, rx chmask: 1
>> [19602.108744] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
>> [19602.169030] ath9k: Set channel: 2432 MHz
>> [19602.169040] ath9k: tx chmask: 1, rx chmask: 1
>> [19602.169144] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
>> [19602.230009] ath9k: Set channel: 2437 MHz
>> [19602.230012] ath9k: tx chmask: 1, rx chmask: 1
>> [19602.230100] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
>> [19602.291015] ath9k: Set channel: 2442 MHz
>> [19602.291019] ath9k: tx chmask: 1, rx chmask: 1
>> [19602.291110] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
>> [19602.352012] ath9k: Set channel: 2447 MHz
>> [19602.352016] ath9k: tx chmask: 1, rx chmask: 1
>> [19602.352107] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
>> [19602.413008] ath9k: Set channel: 2452 MHz
>> [19602.413010] ath9k: tx chmask: 1, rx chmask: 1
>> [19602.413097] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
>> [19602.474007] ath9k: Set channel: 2457 MHz
>> [19602.474009] ath9k: tx chmask: 1, rx chmask: 1
>> [19602.474519] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
>> [19602.535014] ath9k: Set channel: 2462 MHz
>> [19602.535019] ath9k: tx chmask: 1, rx chmask: 1
>> [19602.535115] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
>> [19602.596014] ath9k: Set channel: 2467 MHz
>> [19602.596019] ath9k: tx chmask: 1, rx chmask: 1
>> [19602.596115] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
>> [19602.797021] ath9k: Set channel: 2472 MHz
>> [19602.797032] ath9k: tx chmask: 1, rx chmask: 1
>> [19602.797136] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
>> [19602.998018] ath9k: Set channel: 2484 MHz
>> [19602.998025] ath9k: tx chmask: 1, rx chmask: 1
>> [19602.998124] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
>> [19603.199023] ath9k: Set channel: 2462 MHz
>> [19603.199031] ath9k: tx chmask: 1, rx chmask: 1
>> [19603.199198] ath9k: (2484 MHz) -> (2462 MHz), chanwidth: 0
>> [19603.200703] ath9k: Set HW RX filter: 0x0
>> [19603.200723] ath9k: Set channel: 2462 MHz
>> [19603.200728] ath9k: tx chmask: 1, rx chmask: 1
>> [19603.200893] ath9k: (2462 MHz) -> (2462 MHz), chanwidth: 0
>> [19603.205188] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
>> 3, cw_max: 7, txop: 47
>> [19603.205203] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
>> 7, cw_max: 15, txop: 94
>> [19603.205213] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
>> 1023, cw_max: 15, txop: 0
>> [19603.205224] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
>> 1023, cw_max: 15, txop: 0
>> [19603.205364] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>> [19603.208182] wlan0: authenticated
>> [19603.208189] wlan0: associate with AP 00:1e:58:b4:f6:83
>> [19603.216915] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
>> status=0 aid=1)
>> [19603.216920] wlan0: associated
>> [19603.216952] ath9k: Choosing rate table for mode: 10
>> [19603.217411] ath9k: RC Initialized with capabilities: 0x0
>> [19603.217420] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
>> 3, cw_max: 7, txop: 47
>> [19603.217437] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
>> 7, cw_max: 15, txop: 94
>> [19603.217451] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
>> 1023, cw_max: 15, txop: 0
>> [19603.217466] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
>> 1023, cw_max: 15, txop: 0
>> [19603.217536] ath9k: RX filter 0x0 bssid 00:1e:58:b4:f6:83 aid 0x0
>> [19603.217541] ath9k: BSS Changed PREAMBLE 1
>> [19603.217546] ath9k: BSS Changed ASSOC 1
>> [19603.217550] ath9k: Bss Info ASSOC 1, bssid: 00:1e:58:b4:f6:83
>> [19603.218918] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>> [19603.218977] ath9k: Set HW RX filter: 0x0
>>
>>
>> I am off to bed, i live in GMT0(+1) time zone
>> Hopefully see ya tomorrow.
>> Is there an IRC channel or anything? this is just slow.
>> Regards
>> Dmitri
>>
>
> Please try with:
>
> CONFIG_MAC80211_VERBOSE_DEBUG=y
> CONFIG_MAC80211_HT_DEBUG=y
>
> I'd like to see what else mac80211 gives out.
>
> Luis
>
Hello Luis.
Do you have an IRC channel or anything? :)
make unload
make clean
make
make install
modprobe ath9k
[ 1182.986586] cfg80211: Calling CRDA to update world regulatory domain
[ 1183.048601] ath9k 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 19
(level, low) -> IRQ 19
[ 1183.486998] ath: Country alpha2 being used: AM
[ 1183.487009] ath: Regpair detected: 0x30
[ 1183.488816] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 1183.489528] cfg80211: Calling CRDA for country: AM
[ 1183.489556] Registered led device: ath9k-phy0::radio
[ 1183.489567] Registered led device: ath9k-phy0::assoc
[ 1183.489577] Registered led device: ath9k-phy0::tx
[ 1183.489596] Registered led device: ath9k-phy0::rx
[ 1183.489603] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
mem=0xffffc200125e0000, irq=19
iplink set wlan0 up
[ 1218.663333] phy0: device now idle
[ 1218.668753] ADDRCONF(NETDEV_UP): wlan0: link is not ready
iwconfig wlan0 essid dlink
[ 1306.861743] phy0: device no longer idle - scanning
[ 1308.038026] wlan0: dropped data frame to not associated station
00:00:00:00:00:00
[ 1308.181315] wlan0: authenticate with AP 00:1e:58:b4:f6:83
[ 1308.184253] wlan0: authenticated
[ 1308.184275] wlan0: associate with AP 00:1e:58:b4:f6:83
[ 1308.384274] wlan0: associate with AP 00:1e:58:b4:f6:83
[ 1308.391814] wlan0: deauthenticated (Reason: 9)
[ 1308.884289] wlan0: dropped data frame to not associated station
00:1e:58:b4:f6:83
[ 1309.394279] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
[ 1309.398138] wlan0 direct probe responded
[ 1309.398146] wlan0: authenticate with AP 00:1e:58:b4:f6:83
[ 1309.400616] wlan0: authenticated
[ 1309.400622] wlan0: associate with AP 00:1e:58:b4:f6:83
[ 1309.600262] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
[ 1309.600266] phy0: device now idle
[ 1309.900291] wlan0: dropped data frame to not associated station
00:1e:58:b4:f6:83
Regards
Dmitri
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-05-19 18:55 ` Dmitri Seletski
@ 2009-05-26 21:42 ` Luis R. Rodriguez
0 siblings, 0 replies; 39+ messages in thread
From: Luis R. Rodriguez @ 2009-05-26 21:42 UTC (permalink / raw)
To: ath9k-devel
On Tue, May 19, 2009 at 11:55 AM, Dmitri Seletski <drjoms@gmail.com> wrote:
> Luis R. Rodriguez wrote:
>> On Mon, May 18, 2009 at 05:33:23PM -0700, Dmitri Seletski wrote:
>>
>>> Luis R. Rodriguez wrote:
>>>
>>>> On Mon, May 18, 2009 at 4:59 PM, Luis R. Rodriguez
>>>> <lrodriguez@atheros.com> wrote:
>>>>
>>>>
>>>>> On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri Seletski wrote:
>>>>>
>>>>>
>>>>>> Luis R. Rodriguez wrote:
>>>>>>
>>>>>>
>>>>>>> On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski <drjoms@gmail.com> wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> compat-wireless-2009-05-19 # grep CONFIG_MAC80211_DEFAULT_PS config.mk
>>>>>>>> CONFIG_MAC80211_DEFAULT_PS=n
>>>>>>>> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
>>>>>>>>
>>>>>>>> make :)
>>>>>>>>
>>>>>>>> make unload
>>>>>>>> make install
>>>>>>>> modprobe ath9k
>>>>>>>> ip link set wlan0 up
>>>>>>>> iwconfig wlan0 essid dlink
>>>>>>>>
>>>>>>>> last (IMHO)relevan't dmesg messages(got loads of dmesg history today)
>>>>>>>>
>>>>>>>>
>>>>>>>> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>>>>>>>> mem=0xffffc200114e0000, irq=19
>>>>>>>> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>>>>>>>> [14216.110829] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>>>>>>>> [14216.310267] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>>>>>>>> [14216.316846] wlan0 direct probe responded
>>>>>>>> [14216.316848] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>> [14216.320962] wlan0: authenticated
>>>>>>>> [14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>> [14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>> [14216.527099] wlan0: deauthenticated (Reason: 9)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> I believe reason 9 is you're AP tells you that you are trying to
>>>>>>> associate to it without first having authenticated.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> [14217.527273] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>>>>>>>> [14217.727264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 timed out
>>>>>>>> [14231.356054] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>> [14231.359188] wlan0: authenticated
>>>>>>>> [14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>> [14231.367102] wlan0: deauthenticated (Reason: 9)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> And we repeat this here.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> [14232.367277] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>>>>>>>> [14232.567284] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>>>>>>>> [14232.570837] wlan0 direct probe responded
>>>>>>>> [14232.570843] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>> [14232.573250] wlan0: authenticated
>>>>>>>> [14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>> [14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>> [14232.780130] wlan0: deauthenticated (Reason: 9)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> And here.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> [14233.780276] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>>>>>>>> [14233.784639] wlan0 direct probe responded
>>>>>>>> [14233.784645] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>> [14233.799082] wlan0: authenticated
>>>>>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>>>>>>>
>>>>>>>> Access point in N mode only currently.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> Hm OK.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Switching to mixture of N, G, B and dmesg throws this:
>>>>>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>>>>>>> [14435.358964] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>> [14435.362920] wlan0: authenticated
>>>>>>>> [14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>> [14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
>>>>>>>> status=0 aid=1)
>>>>>>>> [14435.371752] wlan0: associated
>>>>>>>> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>>>>>>>> [14435.839637] wlan0: disassociated (Reason: 8)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> This is the STA has left. Hm, ?lets try upgrading your supplicant...
>>>>>>> Can you try upgrading to the latest from git?
>>>>>>>
>>>>>>> git://w1.fi/srv/git/hostap.git
>>>>>>>
>>>>>>> ? Luis
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> Hello Luis.
>>>>>> I have no idea what authentication you are talking about.
>>>>>> I am sure that i dont use any authentication.
>>>>>>
>>>>>>
>>>>> I'm talking about the 802.11 authentication which is always
>>>>> required prior to association (even when no encryption is enabled).
>>>>>
>>>>> Can you try a newer wpa_supplicant to see if that helps?
>>>>>
>>>>>
>>>> That is, use a plaintext supplicant as follows:
>>>>
>>>> mcgrof at tesla ~ $ cat plaintext.conf
>>>> ctrl_interface=/var/run/wpa_supplicant
>>>> ap_scan=1
>>>> network={
>>>> ? ? ? ? key_mgmt=NONE
>>>> ? ? ? ? ssid="your-ssid"
>>>> ? ? ? ? scan_ssid=1
>>>> }
>>>>
>>>> wpa_supplicant -i wlan0 -c plaintext.conf
>>>>
>>>> ? Luis
>>>>
>>>>
>>> Hello Luis.
>>>
>>> ou man, you scared shi* out of me :)
>>>
>>>
>>> dimko wpa_supplicant # modprobe -r ath9k
>>> dimko wpa_supplicant # modprobe ath9k debug=0x00000200
>>>
>>>
>>> [19251.514273] wlan0: deauthenticating by local choice (reason=3)
>>> [19251.808278] ath9k 0000:01:07.0: PCI INT A disabled
>>> [19251.808327] ath9k: Driver unloaded
>>> [19288.173497] cfg80211: Calling CRDA to update world regulatory domain
>>> [19288.277348] ath9k 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 19
>>> (level, low) -> IRQ 19
>>> [19288.703537] ath9k: Eeprom VER: 14, REV: 2
>>> [19288.704291] ath: Country alpha2 being used: AM
>>> [19288.704292] ath: Regpair detected: 0x30
>>> [19288.704294] ath9k: Rate: ?1Mbps, ratecode: 27
>>> [19288.704295] ath9k: Rate: ?2Mbps, ratecode: 26
>>> [19288.704297] ath9k: Rate: ?5Mbps, ratecode: 25
>>> [19288.704298] ath9k: Rate: 11Mbps, ratecode: 24
>>> [19288.704299] ath9k: Rate: ?6Mbps, ratecode: 11
>>> [19288.704300] ath9k: Rate: ?9Mbps, ratecode: 15
>>> [19288.704302] ath9k: Rate: 12Mbps, ratecode: 10
>>> [19288.704303] ath9k: Rate: 18Mbps, ratecode: 14
>>> [19288.704304] ath9k: Rate: 24Mbps, ratecode: ?9
>>> [19288.704305] ath9k: Rate: 36Mbps, ratecode: 13
>>> [19288.704306] ath9k: Rate: 48Mbps, ratecode: ?8
>>> [19288.704307] ath9k: Rate: 54Mbps, ratecode: 12
>>> [19288.704309] ath9k: Rate: ?6Mbps, ratecode: 11
>>> [19288.704310] ath9k: Rate: ?9Mbps, ratecode: 15
>>> [19288.704311] ath9k: Rate: 12Mbps, ratecode: 10
>>> [19288.704312] ath9k: Rate: 18Mbps, ratecode: 14
>>> [19288.704313] ath9k: Rate: 24Mbps, ratecode: ?9
>>> [19288.704315] ath9k: Rate: 36Mbps, ratecode: 13
>>> [19288.704316] ath9k: Rate: 48Mbps, ratecode: ?8
>>> [19288.704317] ath9k: Rate: 54Mbps, ratecode: 12
>>> [19288.704339] ath9k: tx DMA: 512 buffers 1 desc/buf
>>> [19288.704379] ath9k: tx DMA map: ffff88009f400000 (77824) -> 0 (77824)
>>> [19288.704406] ath9k: beacon DMA: 4 buffers 1 desc/buf
>>> [19288.704408] ath9k: beacon DMA map: ffff88009f577000 (608) -> 0 (608)
>>> [19288.704410] ath9k: cachelsz 64 rxbufsize 3904
>>> [19288.704412] ath9k: rx DMA: 512 buffers 1 desc/buf
>>> [19288.704455] ath9k: rx DMA map: ffff8800ac560000 (77824) -> 0 (77824)
>>> [19288.707111] phy0: Selected rate control algorithm 'ath9k_rate_control'
>>> [19288.707656] cfg80211: Calling CRDA for country: AM
>>> [19288.707680] Registered led device: ath9k-phy0::radio
>>> [19288.707689] Registered led device: ath9k-phy0::assoc
>>> [19288.707699] Registered led device: ath9k-phy0::tx
>>> [19288.707711] Registered led device: ath9k-phy0::rx
>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>>> mem=0xffffc200114e0000, irq=19
>>>
>>>
>>> ip link set wlan0 up
>>>
>>> [19365.389282] ath9k: Starting driver with initial channel: 2412 MHz
>>> [19365.393590] ath9k: Attach a VIF of type: 2
>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
>>> [19365.404280] ath9k: Set HW RX filter: 0x0
>>> [19365.404378] ath9k: Set channel: 2412 MHz
>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
>>> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], ?aifs: 2, cw_min:
>>> 7, cw_max: 15, txop: 102
>>> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], ?aifs: 2, cw_min:
>>> 15, cw_max: 31, txop: 188
>>> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], ?aifs: 3, cw_min:
>>> 1023, cw_max: 31, txop: 0
>>> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], ?aifs: 7, cw_min:
>>> 1023, cw_max: 31, txop: 0
>>> [19365.408487] ath9k: Set HW RX filter: 0x0
>>> [19365.408514] ath9k: Set HW RX filter: 0x0
>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>>> [19365.410990] ath9k: Set HW RX filter: 0x0
>>>
>>> iwconfig wlan0 essid dlink
>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>>> mem=0xffffc200114e0000, irq=19
>>> [19365.389282] ath9k: Starting driver with initial channel: 2412 MHz
>>> [19365.393590] ath9k: Attach a VIF of type: 2
>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
>>> [19365.404280] ath9k: Set HW RX filter: 0x0
>>> [19365.404378] ath9k: Set channel: 2412 MHz
>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
>>> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], ?aifs: 2, cw_min:
>>> 7, cw_max: 15, txop: 102
>>> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], ?aifs: 2, cw_min:
>>> 15, cw_max: 31, txop: 188
>>> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], ?aifs: 3, cw_min:
>>> 1023, cw_max: 31, txop: 0
>>> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], ?aifs: 7, cw_min:
>>> 1023, cw_max: 31, txop: 0
>>> [19365.408487] ath9k: Set HW RX filter: 0x0
>>> [19365.408514] ath9k: Set HW RX filter: 0x0
>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>>> [19365.410990] ath9k: Set HW RX filter: 0x0
>>> [19457.759393] ath9k: Set HW RX filter: 0x10
>>> [19457.789264] ath9k: Set channel: 2412 MHz
>>> [19457.789270] ath9k: tx chmask: 1, rx chmask: 1
>>> [19457.789373] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
>>> [19457.853264] ath9k: Set channel: 2417 MHz
>>> [19457.853269] ath9k: tx chmask: 1, rx chmask: 1
>>> [19457.853363] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
>>> [19457.914263] ath9k: Set channel: 2422 MHz
>>> [19457.914268] ath9k: tx chmask: 1, rx chmask: 1
>>> [19457.918980] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
>>> [19457.980263] ath9k: Set channel: 2427 MHz
>>> [19457.980268] ath9k: tx chmask: 1, rx chmask: 1
>>> [19457.980363] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
>>> [19458.041263] ath9k: Set channel: 2432 MHz
>>> [19458.041268] ath9k: tx chmask: 1, rx chmask: 1
>>> [19458.041363] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
>>> [19458.102264] ath9k: Set channel: 2437 MHz
>>> [19458.102271] ath9k: tx chmask: 1, rx chmask: 1
>>> [19458.102368] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
>>> [19458.163262] ath9k: Set channel: 2442 MHz
>>> [19458.163267] ath9k: tx chmask: 1, rx chmask: 1
>>> [19458.163360] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
>>> [19458.235263] ath9k: Set channel: 2447 MHz
>>> [19458.235269] ath9k: tx chmask: 1, rx chmask: 1
>>> [19458.235450] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
>>> [19458.296257] ath9k: Set channel: 2452 MHz
>>> [19458.296258] ath9k: tx chmask: 1, rx chmask: 1
>>> [19458.296344] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
>>> [19458.357257] ath9k: Set channel: 2457 MHz
>>> [19458.357258] ath9k: tx chmask: 1, rx chmask: 1
>>> [19458.357344] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
>>> [19458.418257] ath9k: Set channel: 2462 MHz
>>> [19458.418258] ath9k: tx chmask: 1, rx chmask: 1
>>> [19458.418344] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
>>> [19458.479263] ath9k: Set channel: 2467 MHz
>>> [19458.479267] ath9k: tx chmask: 1, rx chmask: 1
>>> [19458.479362] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
>>> [19458.680270] ath9k: Set channel: 2472 MHz
>>> [19458.680280] ath9k: tx chmask: 1, rx chmask: 1
>>> [19458.680381] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
>>> [19458.881265] ath9k: Set channel: 2484 MHz
>>> [19458.881270] ath9k: tx chmask: 1, rx chmask: 1
>>> [19458.881367] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
>>> [19459.082271] ath9k: Set channel: 2412 MHz
>>> [19459.082278] ath9k: tx chmask: 1, rx chmask: 1
>>> [19459.082452] ath9k: (2484 MHz) -> (2412 MHz), chanwidth: 0
>>> [19459.084497] ath9k: Set HW RX filter: 0x0
>>> [19459.085175] ath9k: Set channel: 2462 MHz
>>> [19459.091031] ath9k: tx chmask: 1, rx chmask: 1
>>> [19459.091252] ath9k: (2412 MHz) -> (2462 MHz), chanwidth: 0
>>> [19459.095097] ath9k: Configure tx [queue/halq] [0/3], ?aifs: 2, cw_min:
>>> 3, cw_max: 7, txop: 47
>>> [19459.095114] ath9k: Configure tx [queue/halq] [1/2], ?aifs: 2, cw_min:
>>> 7, cw_max: 15, txop: 94
>>> [19459.095125] ath9k: Configure tx [queue/halq] [2/1], ?aifs: 3, cw_min:
>>> 1023, cw_max: 15, txop: 0
>>> [19459.095136] ath9k: Configure tx [queue/halq] [3/0], ?aifs: 7, cw_min:
>>> 1023, cw_max: 15, txop: 0
>>> [19459.095272] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>> [19459.099880] wlan0: authenticated
>>> [19459.099885] wlan0: associate with AP 00:1e:58:b4:f6:83
>>> [19459.299265] wlan0: associate with AP 00:1e:58:b4:f6:83
>>> [19459.306086] wlan0: deauthenticated (Reason: 9)
>>> [19460.306269] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>>> [19460.316796] wlan0 direct probe responded
>>> [19460.316801] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>> [19460.319702] wlan0: authenticated
>>> [19460.319707] wlan0: associate with AP 00:1e:58:b4:f6:83
>>> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>>
>>>
>>> this is while ap is in N mode.
>>>
>>> This is after i set it mixed NBG:
>>>
>>>
>>> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>> [19601.885667] ath9k: Set HW RX filter: 0x10
>>> [19601.917026] ath9k: Set channel: 2412 MHz
>>> [19601.917034] ath9k: tx chmask: 1, rx chmask: 1
>>> [19601.917192] ath9k: (2462 MHz) -> (2412 MHz), chanwidth: 0
>>> [19601.978014] ath9k: Set channel: 2417 MHz
>>> [19601.978019] ath9k: tx chmask: 1, rx chmask: 1
>>> [19601.978114] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
>>> [19602.039014] ath9k: Set channel: 2422 MHz
>>> [19602.039018] ath9k: tx chmask: 1, rx chmask: 1
>>> [19602.043759] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
>>> [19602.104014] ath9k: Set channel: 2427 MHz
>>> [19602.104019] ath9k: tx chmask: 1, rx chmask: 1
>>> [19602.108744] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
>>> [19602.169030] ath9k: Set channel: 2432 MHz
>>> [19602.169040] ath9k: tx chmask: 1, rx chmask: 1
>>> [19602.169144] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
>>> [19602.230009] ath9k: Set channel: 2437 MHz
>>> [19602.230012] ath9k: tx chmask: 1, rx chmask: 1
>>> [19602.230100] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
>>> [19602.291015] ath9k: Set channel: 2442 MHz
>>> [19602.291019] ath9k: tx chmask: 1, rx chmask: 1
>>> [19602.291110] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
>>> [19602.352012] ath9k: Set channel: 2447 MHz
>>> [19602.352016] ath9k: tx chmask: 1, rx chmask: 1
>>> [19602.352107] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
>>> [19602.413008] ath9k: Set channel: 2452 MHz
>>> [19602.413010] ath9k: tx chmask: 1, rx chmask: 1
>>> [19602.413097] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
>>> [19602.474007] ath9k: Set channel: 2457 MHz
>>> [19602.474009] ath9k: tx chmask: 1, rx chmask: 1
>>> [19602.474519] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
>>> [19602.535014] ath9k: Set channel: 2462 MHz
>>> [19602.535019] ath9k: tx chmask: 1, rx chmask: 1
>>> [19602.535115] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
>>> [19602.596014] ath9k: Set channel: 2467 MHz
>>> [19602.596019] ath9k: tx chmask: 1, rx chmask: 1
>>> [19602.596115] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
>>> [19602.797021] ath9k: Set channel: 2472 MHz
>>> [19602.797032] ath9k: tx chmask: 1, rx chmask: 1
>>> [19602.797136] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
>>> [19602.998018] ath9k: Set channel: 2484 MHz
>>> [19602.998025] ath9k: tx chmask: 1, rx chmask: 1
>>> [19602.998124] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
>>> [19603.199023] ath9k: Set channel: 2462 MHz
>>> [19603.199031] ath9k: tx chmask: 1, rx chmask: 1
>>> [19603.199198] ath9k: (2484 MHz) -> (2462 MHz), chanwidth: 0
>>> [19603.200703] ath9k: Set HW RX filter: 0x0
>>> [19603.200723] ath9k: Set channel: 2462 MHz
>>> [19603.200728] ath9k: tx chmask: 1, rx chmask: 1
>>> [19603.200893] ath9k: (2462 MHz) -> (2462 MHz), chanwidth: 0
>>> [19603.205188] ath9k: Configure tx [queue/halq] [0/3], ?aifs: 2, cw_min:
>>> 3, cw_max: 7, txop: 47
>>> [19603.205203] ath9k: Configure tx [queue/halq] [1/2], ?aifs: 2, cw_min:
>>> 7, cw_max: 15, txop: 94
>>> [19603.205213] ath9k: Configure tx [queue/halq] [2/1], ?aifs: 3, cw_min:
>>> 1023, cw_max: 15, txop: 0
>>> [19603.205224] ath9k: Configure tx [queue/halq] [3/0], ?aifs: 7, cw_min:
>>> 1023, cw_max: 15, txop: 0
>>> [19603.205364] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>> [19603.208182] wlan0: authenticated
>>> [19603.208189] wlan0: associate with AP 00:1e:58:b4:f6:83
>>> [19603.216915] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
>>> status=0 aid=1)
>>> [19603.216920] wlan0: associated
>>> [19603.216952] ath9k: Choosing rate table for mode: 10
>>> [19603.217411] ath9k: RC Initialized with capabilities: 0x0
>>> [19603.217420] ath9k: Configure tx [queue/halq] [0/3], ?aifs: 2, cw_min:
>>> 3, cw_max: 7, txop: 47
>>> [19603.217437] ath9k: Configure tx [queue/halq] [1/2], ?aifs: 2, cw_min:
>>> 7, cw_max: 15, txop: 94
>>> [19603.217451] ath9k: Configure tx [queue/halq] [2/1], ?aifs: 3, cw_min:
>>> 1023, cw_max: 15, txop: 0
>>> [19603.217466] ath9k: Configure tx [queue/halq] [3/0], ?aifs: 7, cw_min:
>>> 1023, cw_max: 15, txop: 0
>>> [19603.217536] ath9k: RX filter 0x0 bssid 00:1e:58:b4:f6:83 aid 0x0
>>> [19603.217541] ath9k: BSS Changed PREAMBLE 1
>>> [19603.217546] ath9k: BSS Changed ASSOC 1
>>> [19603.217550] ath9k: Bss Info ASSOC 1, bssid: 00:1e:58:b4:f6:83
>>> [19603.218918] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>>> [19603.218977] ath9k: Set HW RX filter: 0x0
>>>
>>>
>>> I am off to bed, i live in GMT0(+1) time zone
>>> Hopefully see ya tomorrow.
>>> Is there an IRC channel or anything? this is just slow.
>>> Regards
>>> Dmitri
>>>
>>
>> Please try with:
>>
>> CONFIG_MAC80211_VERBOSE_DEBUG=y
>> CONFIG_MAC80211_HT_DEBUG=y
>>
>> I'd like to see what else mac80211 gives out.
>>
>> ? Luis
>>
> Hello ?Luis.
>
> Do you have an IRC channel or anything? :)
>
> make unload
> make clean
> make
> make install
> modprobe ath9k
>
> [ 1182.986586] cfg80211: Calling CRDA to update world regulatory domain
> [ 1183.048601] ath9k 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 19
> (level, low) -> IRQ 19
> [ 1183.486998] ath: Country alpha2 being used: AM
> [ 1183.487009] ath: Regpair detected: 0x30
> [ 1183.488816] phy0: Selected rate control algorithm 'ath9k_rate_control'
> [ 1183.489528] cfg80211: Calling CRDA for country: AM
> [ 1183.489556] Registered led device: ath9k-phy0::radio
> [ 1183.489567] Registered led device: ath9k-phy0::assoc
> [ 1183.489577] Registered led device: ath9k-phy0::tx
> [ 1183.489596] Registered led device: ath9k-phy0::rx
> [ 1183.489603] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
> mem=0xffffc200125e0000, irq=19
>
> iplink set wlan0 up
>
> [ 1218.663333] phy0: device now idle
> [ 1218.668753] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>
> iwconfig wlan0 essid dlink
>
>
> [ 1306.861743] phy0: device no longer idle - scanning
> [ 1308.038026] wlan0: dropped data frame to not associated station
> 00:00:00:00:00:00
> [ 1308.181315] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> [ 1308.184253] wlan0: authenticated
> [ 1308.184275] wlan0: associate with AP 00:1e:58:b4:f6:83
> [ 1308.384274] wlan0: associate with AP 00:1e:58:b4:f6:83
> [ 1308.391814] wlan0: deauthenticated (Reason: 9)
> [ 1308.884289] wlan0: dropped data frame to not associated station
> 00:1e:58:b4:f6:83
> [ 1309.394279] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
> [ 1309.398138] wlan0 direct probe responded
> [ 1309.398146] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> [ 1309.400616] wlan0: authenticated
> [ 1309.400622] wlan0: associate with AP 00:1e:58:b4:f6:83
> [ 1309.600262] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
> [ 1309.600266] phy0: device now idle
> [ 1309.900291] wlan0: dropped data frame to not associated station
> 00:1e:58:b4:f6:83
Thanks,
we'll look into this. The AP is DAP-1353, configured with 11n with no
encryption on 2.4 GHz band.
Luis
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
[not found] ` <20090615160144.GB19674@tesla>
@ 2009-06-15 17:47 ` Luis R. Rodriguez
2009-06-15 20:28 ` Dmitri Seletski
0 siblings, 1 reply; 39+ messages in thread
From: Luis R. Rodriguez @ 2009-06-15 17:47 UTC (permalink / raw)
To: ath9k-devel
On Mon, Jun 15, 2009 at 09:01:44AM -0700, Luis Rodriguez wrote:
> On Sat, Jun 13, 2009 at 05:35:24PM -0700, Dmitri Seletski wrote:
> > Dmitri Seletski wrote:
> > > Luis R. Rodriguez wrote:
> > >
> > >> On Tue, Jun 09, 2009 at 02:59:23PM -0700, Dmitri Seletski wrote:
> > >>
> > >>
> > >>> Luis R. Rodriguez wrote:
> > >>>
> > >>>
> > >>>> On Tue, Jun 09, 2009 at 08:56:01AM -0700, Dmitri Seletski wrote:
> > >>>>
> > >>>>
> > >>>>
> > >>>>> Dmitri Seletski wrote:
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>> Luis R. Rodriguez wrote:
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>> On Mon, May 18, 2009 at 4:59 PM, Luis R. Rodriguez
> > >>>>>>> <lrodriguez@atheros.com> wrote:
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>> On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri Seletski wrote:
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>>> Luis R. Rodriguez wrote:
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>>> On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski <drjoms@gmail.com> wrote:
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>> compat-wireless-2009-05-19 # grep CONFIG_MAC80211_DEFAULT_PS config.mk
> > >>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS=n
> > >>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
> > >>>>>>>>>>>
> > >>>>>>>>>>> make :)
> > >>>>>>>>>>>
> > >>>>>>>>>>> make unload
> > >>>>>>>>>>> make install
> > >>>>>>>>>>> modprobe ath9k
> > >>>>>>>>>>> ip link set wlan0 up
> > >>>>>>>>>>> iwconfig wlan0 essid dlink
> > >>>>>>>>>>>
> > >>>>>>>>>>> last (IMHO)relevan't dmesg messages(got loads of dmesg history today)
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
> > >>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> > >>>>>>>>>>> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> > >>>>>>>>>>> [14216.110829] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
> > >>>>>>>>>>> [14216.310267] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
> > >>>>>>>>>>> [14216.316846] wlan0 direct probe responded
> > >>>>>>>>>>> [14216.316848] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> > >>>>>>>>>>> [14216.320962] wlan0: authenticated
> > >>>>>>>>>>> [14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83
> > >>>>>>>>>>> [14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83
> > >>>>>>>>>>> [14216.527099] wlan0: deauthenticated (Reason: 9)
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>> I believe reason 9 is you're AP tells you that you are trying to
> > >>>>>>>>>> associate to it without first having authenticated.
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>> [14217.527273] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
> > >>>>>>>>>>> [14217.727264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 timed out
> > >>>>>>>>>>> [14231.356054] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> > >>>>>>>>>>> [14231.359188] wlan0: authenticated
> > >>>>>>>>>>> [14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83
> > >>>>>>>>>>> [14231.367102] wlan0: deauthenticated (Reason: 9)
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>> And we repeat this here.
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>> [14232.367277] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
> > >>>>>>>>>>> [14232.567284] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
> > >>>>>>>>>>> [14232.570837] wlan0 direct probe responded
> > >>>>>>>>>>> [14232.570843] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> > >>>>>>>>>>> [14232.573250] wlan0: authenticated
> > >>>>>>>>>>> [14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83
> > >>>>>>>>>>> [14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83
> > >>>>>>>>>>> [14232.780130] wlan0: deauthenticated (Reason: 9)
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>> And here.
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>> [14233.780276] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
> > >>>>>>>>>>> [14233.784639] wlan0 direct probe responded
> > >>>>>>>>>>> [14233.784645] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> > >>>>>>>>>>> [14233.799082] wlan0: authenticated
> > >>>>>>>>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
> > >>>>>>>>>>>
> > >>>>>>>>>>> Access point in N mode only currently.
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>> Hm OK.
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>> Switching to mixture of N, G, B and dmesg throws this:
> > >>>>>>>>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
> > >>>>>>>>>>> [14435.358964] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> > >>>>>>>>>>> [14435.362920] wlan0: authenticated
> > >>>>>>>>>>> [14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83
> > >>>>>>>>>>> [14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
> > >>>>>>>>>>> status=0 aid=1)
> > >>>>>>>>>>> [14435.371752] wlan0: associated
> > >>>>>>>>>>> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> > >>>>>>>>>>> [14435.839637] wlan0: disassociated (Reason: 8)
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>> This is the STA has left. Hm, lets try upgrading your supplicant...
> > >>>>>>>>>> Can you try upgrading to the latest from git?
> > >>>>>>>>>>
> > >>>>>>>>>> git://w1.fi/srv/git/hostap.git
> > >>>>>>>>>>
> > >>>>>>>>>> Luis
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>> Hello Luis.
> > >>>>>>>>> I have no idea what authentication you are talking about.
> > >>>>>>>>> I am sure that i dont use any authentication.
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>> I'm talking about the 802.11 authentication which is always
> > >>>>>>>> required prior to association (even when no encryption is enabled).
> > >>>>>>>>
> > >>>>>>>> Can you try a newer wpa_supplicant to see if that helps?
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>> That is, use a plaintext supplicant as follows:
> > >>>>>>>
> > >>>>>>> mcgrof at tesla ~ $ cat plaintext.conf
> > >>>>>>> ctrl_interface=/var/run/wpa_supplicant
> > >>>>>>> ap_scan=1
> > >>>>>>> network={
> > >>>>>>> key_mgmt=NONE
> > >>>>>>> ssid="your-ssid"
> > >>>>>>> scan_ssid=1
> > >>>>>>> }
> > >>>>>>>
> > >>>>>>> wpa_supplicant -i wlan0 -c plaintext.conf
> > >>>>>>>
> > >>>>>>> Luis
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>> Hello Luis.
> > >>>>>>
> > >>>>>> ou man, you scared shi* out of me :)
> > >>>>>>
> > >>>>>>
> > >>>>>> dimko wpa_supplicant # modprobe -r ath9k
> > >>>>>> dimko wpa_supplicant # modprobe ath9k debug=0x00000200
> > >>>>>>
> > >>>>>>
> > >>>>>> [19251.514273] wlan0: deauthenticating by local choice (reason=3)
> > >>>>>> [19251.808278] ath9k 0000:01:07.0: PCI INT A disabled
> > >>>>>> [19251.808327] ath9k: Driver unloaded
> > >>>>>> [19288.173497] cfg80211: Calling CRDA to update world regulatory domain
> > >>>>>> [19288.277348] ath9k 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 19
> > >>>>>> (level, low) -> IRQ 19
> > >>>>>> [19288.703537] ath9k: Eeprom VER: 14, REV: 2
> > >>>>>> [19288.704291] ath: Country alpha2 being used: AM
> > >>>>>> [19288.704292] ath: Regpair detected: 0x30
> > >>>>>> [19288.704294] ath9k: Rate: 1Mbps, ratecode: 27
> > >>>>>> [19288.704295] ath9k: Rate: 2Mbps, ratecode: 26
> > >>>>>> [19288.704297] ath9k: Rate: 5Mbps, ratecode: 25
> > >>>>>> [19288.704298] ath9k: Rate: 11Mbps, ratecode: 24
> > >>>>>> [19288.704299] ath9k: Rate: 6Mbps, ratecode: 11
> > >>>>>> [19288.704300] ath9k: Rate: 9Mbps, ratecode: 15
> > >>>>>> [19288.704302] ath9k: Rate: 12Mbps, ratecode: 10
> > >>>>>> [19288.704303] ath9k: Rate: 18Mbps, ratecode: 14
> > >>>>>> [19288.704304] ath9k: Rate: 24Mbps, ratecode: 9
> > >>>>>> [19288.704305] ath9k: Rate: 36Mbps, ratecode: 13
> > >>>>>> [19288.704306] ath9k: Rate: 48Mbps, ratecode: 8
> > >>>>>> [19288.704307] ath9k: Rate: 54Mbps, ratecode: 12
> > >>>>>> [19288.704309] ath9k: Rate: 6Mbps, ratecode: 11
> > >>>>>> [19288.704310] ath9k: Rate: 9Mbps, ratecode: 15
> > >>>>>> [19288.704311] ath9k: Rate: 12Mbps, ratecode: 10
> > >>>>>> [19288.704312] ath9k: Rate: 18Mbps, ratecode: 14
> > >>>>>> [19288.704313] ath9k: Rate: 24Mbps, ratecode: 9
> > >>>>>> [19288.704315] ath9k: Rate: 36Mbps, ratecode: 13
> > >>>>>> [19288.704316] ath9k: Rate: 48Mbps, ratecode: 8
> > >>>>>> [19288.704317] ath9k: Rate: 54Mbps, ratecode: 12
> > >>>>>> [19288.704339] ath9k: tx DMA: 512 buffers 1 desc/buf
> > >>>>>> [19288.704379] ath9k: tx DMA map: ffff88009f400000 (77824) -> 0 (77824)
> > >>>>>> [19288.704406] ath9k: beacon DMA: 4 buffers 1 desc/buf
> > >>>>>> [19288.704408] ath9k: beacon DMA map: ffff88009f577000 (608) -> 0 (608)
> > >>>>>> [19288.704410] ath9k: cachelsz 64 rxbufsize 3904
> > >>>>>> [19288.704412] ath9k: rx DMA: 512 buffers 1 desc/buf
> > >>>>>> [19288.704455] ath9k: rx DMA map: ffff8800ac560000 (77824) -> 0 (77824)
> > >>>>>> [19288.707111] phy0: Selected rate control algorithm 'ath9k_rate_control'
> > >>>>>> [19288.707656] cfg80211: Calling CRDA for country: AM
> > >>>>>> [19288.707680] Registered led device: ath9k-phy0::radio
> > >>>>>> [19288.707689] Registered led device: ath9k-phy0::assoc
> > >>>>>> [19288.707699] Registered led device: ath9k-phy0::tx
> > >>>>>> [19288.707711] Registered led device: ath9k-phy0::rx
> > >>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
> > >>>>>> mem=0xffffc200114e0000, irq=19
> > >>>>>>
> > >>>>>>
> > >>>>>> ip link set wlan0 up
> > >>>>>>
> > >>>>>> [19365.389282] ath9k: Starting driver with initial channel: 2412 MHz
> > >>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
> > >>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
> > >>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
> > >>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
> > >>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
> > >>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
> > >>>>>> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
> > >>>>>> 7, cw_max: 15, txop: 102
> > >>>>>> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
> > >>>>>> 15, cw_max: 31, txop: 188
> > >>>>>> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
> > >>>>>> 1023, cw_max: 31, txop: 0
> > >>>>>> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
> > >>>>>> 1023, cw_max: 31, txop: 0
> > >>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
> > >>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
> > >>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> > >>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
> > >>>>>>
> > >>>>>> iwconfig wlan0 essid dlink
> > >>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
> > >>>>>> mem=0xffffc200114e0000, irq=19
> > >>>>>> [19365.389282] ath9k: Starting driver with initial channel: 2412 MHz
> > >>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
> > >>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
> > >>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
> > >>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
> > >>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
> > >>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
> > >>>>>> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
> > >>>>>> 7, cw_max: 15, txop: 102
> > >>>>>> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
> > >>>>>> 15, cw_max: 31, txop: 188
> > >>>>>> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
> > >>>>>> 1023, cw_max: 31, txop: 0
> > >>>>>> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
> > >>>>>> 1023, cw_max: 31, txop: 0
> > >>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
> > >>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
> > >>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> > >>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
> > >>>>>> [19457.759393] ath9k: Set HW RX filter: 0x10
> > >>>>>> [19457.789264] ath9k: Set channel: 2412 MHz
> > >>>>>> [19457.789270] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19457.789373] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
> > >>>>>> [19457.853264] ath9k: Set channel: 2417 MHz
> > >>>>>> [19457.853269] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19457.853363] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
> > >>>>>> [19457.914263] ath9k: Set channel: 2422 MHz
> > >>>>>> [19457.914268] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19457.918980] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
> > >>>>>> [19457.980263] ath9k: Set channel: 2427 MHz
> > >>>>>> [19457.980268] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19457.980363] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
> > >>>>>> [19458.041263] ath9k: Set channel: 2432 MHz
> > >>>>>> [19458.041268] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19458.041363] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
> > >>>>>> [19458.102264] ath9k: Set channel: 2437 MHz
> > >>>>>> [19458.102271] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19458.102368] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
> > >>>>>> [19458.163262] ath9k: Set channel: 2442 MHz
> > >>>>>> [19458.163267] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19458.163360] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
> > >>>>>> [19458.235263] ath9k: Set channel: 2447 MHz
> > >>>>>> [19458.235269] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19458.235450] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
> > >>>>>> [19458.296257] ath9k: Set channel: 2452 MHz
> > >>>>>> [19458.296258] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19458.296344] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
> > >>>>>> [19458.357257] ath9k: Set channel: 2457 MHz
> > >>>>>> [19458.357258] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19458.357344] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
> > >>>>>> [19458.418257] ath9k: Set channel: 2462 MHz
> > >>>>>> [19458.418258] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19458.418344] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
> > >>>>>> [19458.479263] ath9k: Set channel: 2467 MHz
> > >>>>>> [19458.479267] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19458.479362] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
> > >>>>>> [19458.680270] ath9k: Set channel: 2472 MHz
> > >>>>>> [19458.680280] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19458.680381] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
> > >>>>>> [19458.881265] ath9k: Set channel: 2484 MHz
> > >>>>>> [19458.881270] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19458.881367] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
> > >>>>>> [19459.082271] ath9k: Set channel: 2412 MHz
> > >>>>>> [19459.082278] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19459.082452] ath9k: (2484 MHz) -> (2412 MHz), chanwidth: 0
> > >>>>>> [19459.084497] ath9k: Set HW RX filter: 0x0
> > >>>>>> [19459.085175] ath9k: Set channel: 2462 MHz
> > >>>>>> [19459.091031] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19459.091252] ath9k: (2412 MHz) -> (2462 MHz), chanwidth: 0
> > >>>>>> [19459.095097] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
> > >>>>>> 3, cw_max: 7, txop: 47
> > >>>>>> [19459.095114] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
> > >>>>>> 7, cw_max: 15, txop: 94
> > >>>>>> [19459.095125] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
> > >>>>>> 1023, cw_max: 15, txop: 0
> > >>>>>> [19459.095136] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
> > >>>>>> 1023, cw_max: 15, txop: 0
> > >>>>>> [19459.095272] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> > >>>>>> [19459.099880] wlan0: authenticated
> > >>>>>> [19459.099885] wlan0: associate with AP 00:1e:58:b4:f6:83
> > >>>>>> [19459.299265] wlan0: associate with AP 00:1e:58:b4:f6:83
> > >>>>>> [19459.306086] wlan0: deauthenticated (Reason: 9)
> > >>>>>> [19460.306269] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
> > >>>>>> [19460.316796] wlan0 direct probe responded
> > >>>>>> [19460.316801] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> > >>>>>> [19460.319702] wlan0: authenticated
> > >>>>>> [19460.319707] wlan0: associate with AP 00:1e:58:b4:f6:83
> > >>>>>> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
> > >>>>>>
> > >>>>>>
> > >>>>>> this is while ap is in N mode.
> > >>>>>>
> > >>>>>> This is after i set it mixed NBG:
> > >>>>>>
> > >>>>>>
> > >>>>>> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
> > >>>>>> [19601.885667] ath9k: Set HW RX filter: 0x10
> > >>>>>> [19601.917026] ath9k: Set channel: 2412 MHz
> > >>>>>> [19601.917034] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19601.917192] ath9k: (2462 MHz) -> (2412 MHz), chanwidth: 0
> > >>>>>> [19601.978014] ath9k: Set channel: 2417 MHz
> > >>>>>> [19601.978019] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19601.978114] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
> > >>>>>> [19602.039014] ath9k: Set channel: 2422 MHz
> > >>>>>> [19602.039018] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19602.043759] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
> > >>>>>> [19602.104014] ath9k: Set channel: 2427 MHz
> > >>>>>> [19602.104019] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19602.108744] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
> > >>>>>> [19602.169030] ath9k: Set channel: 2432 MHz
> > >>>>>> [19602.169040] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19602.169144] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
> > >>>>>> [19602.230009] ath9k: Set channel: 2437 MHz
> > >>>>>> [19602.230012] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19602.230100] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
> > >>>>>> [19602.291015] ath9k: Set channel: 2442 MHz
> > >>>>>> [19602.291019] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19602.291110] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
> > >>>>>> [19602.352012] ath9k: Set channel: 2447 MHz
> > >>>>>> [19602.352016] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19602.352107] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
> > >>>>>> [19602.413008] ath9k: Set channel: 2452 MHz
> > >>>>>> [19602.413010] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19602.413097] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
> > >>>>>> [19602.474007] ath9k: Set channel: 2457 MHz
> > >>>>>> [19602.474009] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19602.474519] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
> > >>>>>> [19602.535014] ath9k: Set channel: 2462 MHz
> > >>>>>> [19602.535019] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19602.535115] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
> > >>>>>> [19602.596014] ath9k: Set channel: 2467 MHz
> > >>>>>> [19602.596019] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19602.596115] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
> > >>>>>> [19602.797021] ath9k: Set channel: 2472 MHz
> > >>>>>> [19602.797032] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19602.797136] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
> > >>>>>> [19602.998018] ath9k: Set channel: 2484 MHz
> > >>>>>> [19602.998025] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19602.998124] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
> > >>>>>> [19603.199023] ath9k: Set channel: 2462 MHz
> > >>>>>> [19603.199031] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19603.199198] ath9k: (2484 MHz) -> (2462 MHz), chanwidth: 0
> > >>>>>> [19603.200703] ath9k: Set HW RX filter: 0x0
> > >>>>>> [19603.200723] ath9k: Set channel: 2462 MHz
> > >>>>>> [19603.200728] ath9k: tx chmask: 1, rx chmask: 1
> > >>>>>> [19603.200893] ath9k: (2462 MHz) -> (2462 MHz), chanwidth: 0
> > >>>>>> [19603.205188] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
> > >>>>>> 3, cw_max: 7, txop: 47
> > >>>>>> [19603.205203] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
> > >>>>>> 7, cw_max: 15, txop: 94
> > >>>>>> [19603.205213] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
> > >>>>>> 1023, cw_max: 15, txop: 0
> > >>>>>> [19603.205224] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
> > >>>>>> 1023, cw_max: 15, txop: 0
> > >>>>>> [19603.205364] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> > >>>>>> [19603.208182] wlan0: authenticated
> > >>>>>> [19603.208189] wlan0: associate with AP 00:1e:58:b4:f6:83
> > >>>>>> [19603.216915] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
> > >>>>>> status=0 aid=1)
> > >>>>>> [19603.216920] wlan0: associated
> > >>>>>> [19603.216952] ath9k: Choosing rate table for mode: 10
> > >>>>>> [19603.217411] ath9k: RC Initialized with capabilities: 0x0
> > >>>>>> [19603.217420] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
> > >>>>>> 3, cw_max: 7, txop: 47
> > >>>>>> [19603.217437] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
> > >>>>>> 7, cw_max: 15, txop: 94
> > >>>>>> [19603.217451] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
> > >>>>>> 1023, cw_max: 15, txop: 0
> > >>>>>> [19603.217466] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
> > >>>>>> 1023, cw_max: 15, txop: 0
> > >>>>>> [19603.217536] ath9k: RX filter 0x0 bssid 00:1e:58:b4:f6:83 aid 0x0
> > >>>>>> [19603.217541] ath9k: BSS Changed PREAMBLE 1
> > >>>>>> [19603.217546] ath9k: BSS Changed ASSOC 1
> > >>>>>> [19603.217550] ath9k: Bss Info ASSOC 1, bssid: 00:1e:58:b4:f6:83
> > >>>>>> [19603.218918] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> > >>>>>> [19603.218977] ath9k: Set HW RX filter: 0x0
> > >>>>>>
> > >>>>>>
> > >>>>>> I am off to bed, i live in GMT0(+1) time zone
> > >>>>>> Hopefully see ya tomorrow.
> > >>>>>> Is there an IRC channel or anything? this is just slow.
> > >>>>>> Regards
> > >>>>>> Dmitri
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>> Hello Luis.
> > >>>>>
> > >>>>> I don't mean to rush you, was only wandering, what is story with report
> > >>>>> i have submitted, any progress on it yet?
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>> So I am working on other items and was hoping someone else could tackle this
> > >>>> but it seems everyone has been busy with other items as well. I'll try to help
> > >>>> you with this but I'm as in the dark with this issue as you are right now. We'll
> > >>>> need to debug futher.
> > >>>>
> > >>>> Did you see the other thread about a similar issue? It seemed the person was
> > >>>> running Network Manager (and that spawns it own wpa_supplicant).
> > >>>>
> > >>>> Just to confirm -- are you certain you don't have any instance of nm-applet,
> > >>>> NetworkManager or a wpa_supplicant running in the background?
> > >>>>
> > >>>> Luis
> > >>>>
> > >>>>
> > >>>>
> > >>> Hello Luis.
> > >>>
> > >>> I have no idea what is nm-applet. I am as close to bare bones as
> > >>> possible. I am using gentoo distribution, it by design is not using any
> > >>> graphical interfaces. to set up network, you have to set it up initially
> > >>> manually(using available comands or text editor), it doesn't even have
> > >>> DHCP client by default!
> > >>> typically if what you have mentioned is part of start up scripts - i
> > >>> would know about it.(since most of them if not installed by default -
> > >>> are not starting up by default)
> > >>>
> > >>> emerge -s nm-applet
> > >>> Searching...
> > >>> [ Results for search key : nm-applet ]
> > >>> [ Applications found : 1 ]
> > >>>
> > >>> * gnome-extra/nm-applet
> > >>> Latest version available: 0.6.6
> > >>> Latest version installed: [ Not Installed ]
> > >>>
> > >>> I am not sure what is "wpa_supplicant", since from what i understand
> > >>> it's not user land executable.
> > >>>
> > >>> rc-status
> > >>> Runlevel: default
> > >>> acpid
> > >>> [ started ]
> > >>> alsasound
> > >>> [ started ]
> > >>> clamd
> > >>> [ started ]
> > >>> hald
> > >>> [ started ]
> > >>> hdparm
> > >>> [ started ]
> > >>> lm_sensors
> > >>> [ started ]
> > >>> local
> > >>> [ started ]
> > >>> netmount
> > >>> [ started ]
> > >>> smartd
> > >>> [ started ]
> > >>> syslog-ng
> > >>> [ started ]
> > >>>
> > >>> All my network settings are done explicitly by hands or with use of
> > >>> command line dhcp client. There is only one automated network script.,
> > >>> which runs dhcp client on any available ethernet interface, which is my
> > >>> eth0 card.
> > >>>
> > >>> emerge -s wpa_supplicant
> > >>> Searching...
> > >>> [ Results for search key : wpa_supplicant ]
> > >>> [ Applications found : 1 ]
> > >>>
> > >>> * net-wireless/wpa_supplicant
> > >>> Latest version available: 0.6.4
> > >>> Latest version installed: [ Not Installed ]
> > >>> Size of files: 972 kB
> > >>> Homepage: http://hostap.epitest.fi/wpa_supplicant/
> > >>> Description: IEEE 802.1X/WPA supplicant for secure wireless
> > >>> transfers
> > >>> License: || ( GPL-2 BSD )
> > >>>
> > >>> No gnome networking software is installed, at least not running for sure.
> > >>> i can send you output of pstree if you like,
> > >>>
> > >>>
> > >> Yes, send that please. wpa_supplicant is a userspace application, used for
> > >> connecting to WPA / WPA2 networks. It also is also responsible for roaming
> > >> for us in Linux. Network Manager uses it on the GNOME / KDE desktop, and the
> > >> applet on the top right hand side of the desktop that lets you select which
> > >> wireless network to connect to is the "nm-applet".
> > >>
> > >> Luis
> > >>
> > >>
> > > Sure, if you look carefully into emerge outputs i have send previously -
> > > you will see, that none of those packages are actually installed!
> > >
> > Hello Luis.
> >
> > Just wondering is there any update on the problem? Is there anything I
> > can do to help identify problem?
Dmitri, can you provide a tcmpdump (pcap) capture of this?
Luis
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-06-15 17:47 ` Luis R. Rodriguez
@ 2009-06-15 20:28 ` Dmitri Seletski
[not found] ` <4A36CFF9.6070506@gmail.com>
0 siblings, 1 reply; 39+ messages in thread
From: Dmitri Seletski @ 2009-06-15 20:28 UTC (permalink / raw)
To: ath9k-devel
Luis R. Rodriguez wrote:
> On Mon, Jun 15, 2009 at 09:01:44AM -0700, Luis Rodriguez wrote:
>
>> On Sat, Jun 13, 2009 at 05:35:24PM -0700, Dmitri Seletski wrote:
>>
>>> Dmitri Seletski wrote:
>>>
>>>> Luis R. Rodriguez wrote:
>>>>
>>>>
>>>>> On Tue, Jun 09, 2009 at 02:59:23PM -0700, Dmitri Seletski wrote:
>>>>>
>>>>>
>>>>>
>>>>>> Luis R. Rodriguez wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>> On Tue, Jun 09, 2009 at 08:56:01AM -0700, Dmitri Seletski wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Dmitri Seletski wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> Luis R. Rodriguez wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> On Mon, May 18, 2009 at 4:59 PM, Luis R. Rodriguez
>>>>>>>>>> <lrodriguez@atheros.com> wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri Seletski wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> Luis R. Rodriguez wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>> On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski <drjoms@gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> compat-wireless-2009-05-19 # grep CONFIG_MAC80211_DEFAULT_PS config.mk
>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS=n
>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> make :)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> make unload
>>>>>>>>>>>>>> make install
>>>>>>>>>>>>>> modprobe ath9k
>>>>>>>>>>>>>> ip link set wlan0 up
>>>>>>>>>>>>>> iwconfig wlan0 essid dlink
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> last (IMHO)relevan't dmesg messages(got loads of dmesg history today)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>>>>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
>>>>>>>>>>>>>> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>>>>>>>>>>>>>> [14216.110829] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>>>>>>>>>>>>>> [14216.310267] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>>>>>>>>>>>>>> [14216.316846] wlan0 direct probe responded
>>>>>>>>>>>>>> [14216.316848] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>> [14216.320962] wlan0: authenticated
>>>>>>>>>>>>>> [14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>> [14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>> [14216.527099] wlan0: deauthenticated (Reason: 9)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> I believe reason 9 is you're AP tells you that you are trying to
>>>>>>>>>>>>> associate to it without first having authenticated.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> [14217.527273] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>>>>>>>>>>>>>> [14217.727264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 timed out
>>>>>>>>>>>>>> [14231.356054] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>> [14231.359188] wlan0: authenticated
>>>>>>>>>>>>>> [14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>> [14231.367102] wlan0: deauthenticated (Reason: 9)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> And we repeat this here.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> [14232.367277] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>>>>>>>>>>>>>> [14232.567284] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>>>>>>>>>>>>>> [14232.570837] wlan0 direct probe responded
>>>>>>>>>>>>>> [14232.570843] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>> [14232.573250] wlan0: authenticated
>>>>>>>>>>>>>> [14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>> [14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>> [14232.780130] wlan0: deauthenticated (Reason: 9)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> And here.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> [14233.780276] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>>>>>>>>>>>>>> [14233.784639] wlan0 direct probe responded
>>>>>>>>>>>>>> [14233.784645] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>> [14233.799082] wlan0: authenticated
>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Access point in N mode only currently.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> Hm OK.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Switching to mixture of N, G, B and dmesg throws this:
>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>>>>>>>>>>>>> [14435.358964] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>> [14435.362920] wlan0: authenticated
>>>>>>>>>>>>>> [14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>> [14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
>>>>>>>>>>>>>> status=0 aid=1)
>>>>>>>>>>>>>> [14435.371752] wlan0: associated
>>>>>>>>>>>>>> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>>>>>>>>>>>>>> [14435.839637] wlan0: disassociated (Reason: 8)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> This is the STA has left. Hm, lets try upgrading your supplicant...
>>>>>>>>>>>>> Can you try upgrading to the latest from git?
>>>>>>>>>>>>>
>>>>>>>>>>>>> git://w1.fi/srv/git/hostap.git
>>>>>>>>>>>>>
>>>>>>>>>>>>> Luis
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>> Hello Luis.
>>>>>>>>>>>> I have no idea what authentication you are talking about.
>>>>>>>>>>>> I am sure that i dont use any authentication.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>> I'm talking about the 802.11 authentication which is always
>>>>>>>>>>> required prior to association (even when no encryption is enabled).
>>>>>>>>>>>
>>>>>>>>>>> Can you try a newer wpa_supplicant to see if that helps?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>> That is, use a plaintext supplicant as follows:
>>>>>>>>>>
>>>>>>>>>> mcgrof at tesla ~ $ cat plaintext.conf
>>>>>>>>>> ctrl_interface=/var/run/wpa_supplicant
>>>>>>>>>> ap_scan=1
>>>>>>>>>> network={
>>>>>>>>>> key_mgmt=NONE
>>>>>>>>>> ssid="your-ssid"
>>>>>>>>>> scan_ssid=1
>>>>>>>>>> }
>>>>>>>>>>
>>>>>>>>>> wpa_supplicant -i wlan0 -c plaintext.conf
>>>>>>>>>>
>>>>>>>>>> Luis
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>> Hello Luis.
>>>>>>>>>
>>>>>>>>> ou man, you scared shi* out of me :)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> dimko wpa_supplicant # modprobe -r ath9k
>>>>>>>>> dimko wpa_supplicant # modprobe ath9k debug=0x00000200
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> [19251.514273] wlan0: deauthenticating by local choice (reason=3)
>>>>>>>>> [19251.808278] ath9k 0000:01:07.0: PCI INT A disabled
>>>>>>>>> [19251.808327] ath9k: Driver unloaded
>>>>>>>>> [19288.173497] cfg80211: Calling CRDA to update world regulatory domain
>>>>>>>>> [19288.277348] ath9k 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 19
>>>>>>>>> (level, low) -> IRQ 19
>>>>>>>>> [19288.703537] ath9k: Eeprom VER: 14, REV: 2
>>>>>>>>> [19288.704291] ath: Country alpha2 being used: AM
>>>>>>>>> [19288.704292] ath: Regpair detected: 0x30
>>>>>>>>> [19288.704294] ath9k: Rate: 1Mbps, ratecode: 27
>>>>>>>>> [19288.704295] ath9k: Rate: 2Mbps, ratecode: 26
>>>>>>>>> [19288.704297] ath9k: Rate: 5Mbps, ratecode: 25
>>>>>>>>> [19288.704298] ath9k: Rate: 11Mbps, ratecode: 24
>>>>>>>>> [19288.704299] ath9k: Rate: 6Mbps, ratecode: 11
>>>>>>>>> [19288.704300] ath9k: Rate: 9Mbps, ratecode: 15
>>>>>>>>> [19288.704302] ath9k: Rate: 12Mbps, ratecode: 10
>>>>>>>>> [19288.704303] ath9k: Rate: 18Mbps, ratecode: 14
>>>>>>>>> [19288.704304] ath9k: Rate: 24Mbps, ratecode: 9
>>>>>>>>> [19288.704305] ath9k: Rate: 36Mbps, ratecode: 13
>>>>>>>>> [19288.704306] ath9k: Rate: 48Mbps, ratecode: 8
>>>>>>>>> [19288.704307] ath9k: Rate: 54Mbps, ratecode: 12
>>>>>>>>> [19288.704309] ath9k: Rate: 6Mbps, ratecode: 11
>>>>>>>>> [19288.704310] ath9k: Rate: 9Mbps, ratecode: 15
>>>>>>>>> [19288.704311] ath9k: Rate: 12Mbps, ratecode: 10
>>>>>>>>> [19288.704312] ath9k: Rate: 18Mbps, ratecode: 14
>>>>>>>>> [19288.704313] ath9k: Rate: 24Mbps, ratecode: 9
>>>>>>>>> [19288.704315] ath9k: Rate: 36Mbps, ratecode: 13
>>>>>>>>> [19288.704316] ath9k: Rate: 48Mbps, ratecode: 8
>>>>>>>>> [19288.704317] ath9k: Rate: 54Mbps, ratecode: 12
>>>>>>>>> [19288.704339] ath9k: tx DMA: 512 buffers 1 desc/buf
>>>>>>>>> [19288.704379] ath9k: tx DMA map: ffff88009f400000 (77824) -> 0 (77824)
>>>>>>>>> [19288.704406] ath9k: beacon DMA: 4 buffers 1 desc/buf
>>>>>>>>> [19288.704408] ath9k: beacon DMA map: ffff88009f577000 (608) -> 0 (608)
>>>>>>>>> [19288.704410] ath9k: cachelsz 64 rxbufsize 3904
>>>>>>>>> [19288.704412] ath9k: rx DMA: 512 buffers 1 desc/buf
>>>>>>>>> [19288.704455] ath9k: rx DMA map: ffff8800ac560000 (77824) -> 0 (77824)
>>>>>>>>> [19288.707111] phy0: Selected rate control algorithm 'ath9k_rate_control'
>>>>>>>>> [19288.707656] cfg80211: Calling CRDA for country: AM
>>>>>>>>> [19288.707680] Registered led device: ath9k-phy0::radio
>>>>>>>>> [19288.707689] Registered led device: ath9k-phy0::assoc
>>>>>>>>> [19288.707699] Registered led device: ath9k-phy0::tx
>>>>>>>>> [19288.707711] Registered led device: ath9k-phy0::rx
>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>>>>>>>>> mem=0xffffc200114e0000, irq=19
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ip link set wlan0 up
>>>>>>>>>
>>>>>>>>> [19365.389282] ath9k: Starting driver with initial channel: 2412 MHz
>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
>>>>>>>>> 7, cw_max: 15, txop: 102
>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
>>>>>>>>> 15, cw_max: 31, txop: 188
>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
>>>>>>>>> 1023, cw_max: 31, txop: 0
>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
>>>>>>>>> 1023, cw_max: 31, txop: 0
>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
>>>>>>>>>
>>>>>>>>> iwconfig wlan0 essid dlink
>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>>>>>>>>> mem=0xffffc200114e0000, irq=19
>>>>>>>>> [19365.389282] ath9k: Starting driver with initial channel: 2412 MHz
>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
>>>>>>>>> 7, cw_max: 15, txop: 102
>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
>>>>>>>>> 15, cw_max: 31, txop: 188
>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
>>>>>>>>> 1023, cw_max: 31, txop: 0
>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
>>>>>>>>> 1023, cw_max: 31, txop: 0
>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
>>>>>>>>> [19457.759393] ath9k: Set HW RX filter: 0x10
>>>>>>>>> [19457.789264] ath9k: Set channel: 2412 MHz
>>>>>>>>> [19457.789270] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19457.789373] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
>>>>>>>>> [19457.853264] ath9k: Set channel: 2417 MHz
>>>>>>>>> [19457.853269] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19457.853363] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
>>>>>>>>> [19457.914263] ath9k: Set channel: 2422 MHz
>>>>>>>>> [19457.914268] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19457.918980] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
>>>>>>>>> [19457.980263] ath9k: Set channel: 2427 MHz
>>>>>>>>> [19457.980268] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19457.980363] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
>>>>>>>>> [19458.041263] ath9k: Set channel: 2432 MHz
>>>>>>>>> [19458.041268] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19458.041363] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
>>>>>>>>> [19458.102264] ath9k: Set channel: 2437 MHz
>>>>>>>>> [19458.102271] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19458.102368] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
>>>>>>>>> [19458.163262] ath9k: Set channel: 2442 MHz
>>>>>>>>> [19458.163267] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19458.163360] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
>>>>>>>>> [19458.235263] ath9k: Set channel: 2447 MHz
>>>>>>>>> [19458.235269] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19458.235450] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
>>>>>>>>> [19458.296257] ath9k: Set channel: 2452 MHz
>>>>>>>>> [19458.296258] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19458.296344] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
>>>>>>>>> [19458.357257] ath9k: Set channel: 2457 MHz
>>>>>>>>> [19458.357258] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19458.357344] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
>>>>>>>>> [19458.418257] ath9k: Set channel: 2462 MHz
>>>>>>>>> [19458.418258] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19458.418344] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
>>>>>>>>> [19458.479263] ath9k: Set channel: 2467 MHz
>>>>>>>>> [19458.479267] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19458.479362] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
>>>>>>>>> [19458.680270] ath9k: Set channel: 2472 MHz
>>>>>>>>> [19458.680280] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19458.680381] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
>>>>>>>>> [19458.881265] ath9k: Set channel: 2484 MHz
>>>>>>>>> [19458.881270] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19458.881367] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
>>>>>>>>> [19459.082271] ath9k: Set channel: 2412 MHz
>>>>>>>>> [19459.082278] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19459.082452] ath9k: (2484 MHz) -> (2412 MHz), chanwidth: 0
>>>>>>>>> [19459.084497] ath9k: Set HW RX filter: 0x0
>>>>>>>>> [19459.085175] ath9k: Set channel: 2462 MHz
>>>>>>>>> [19459.091031] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19459.091252] ath9k: (2412 MHz) -> (2462 MHz), chanwidth: 0
>>>>>>>>> [19459.095097] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
>>>>>>>>> 3, cw_max: 7, txop: 47
>>>>>>>>> [19459.095114] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
>>>>>>>>> 7, cw_max: 15, txop: 94
>>>>>>>>> [19459.095125] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
>>>>>>>>> 1023, cw_max: 15, txop: 0
>>>>>>>>> [19459.095136] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
>>>>>>>>> 1023, cw_max: 15, txop: 0
>>>>>>>>> [19459.095272] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>> [19459.099880] wlan0: authenticated
>>>>>>>>> [19459.099885] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>> [19459.299265] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>> [19459.306086] wlan0: deauthenticated (Reason: 9)
>>>>>>>>> [19460.306269] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>>>>>>>>> [19460.316796] wlan0 direct probe responded
>>>>>>>>> [19460.316801] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>> [19460.319702] wlan0: authenticated
>>>>>>>>> [19460.319707] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> this is while ap is in N mode.
>>>>>>>>>
>>>>>>>>> This is after i set it mixed NBG:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>>>>>>>> [19601.885667] ath9k: Set HW RX filter: 0x10
>>>>>>>>> [19601.917026] ath9k: Set channel: 2412 MHz
>>>>>>>>> [19601.917034] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19601.917192] ath9k: (2462 MHz) -> (2412 MHz), chanwidth: 0
>>>>>>>>> [19601.978014] ath9k: Set channel: 2417 MHz
>>>>>>>>> [19601.978019] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19601.978114] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
>>>>>>>>> [19602.039014] ath9k: Set channel: 2422 MHz
>>>>>>>>> [19602.039018] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19602.043759] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
>>>>>>>>> [19602.104014] ath9k: Set channel: 2427 MHz
>>>>>>>>> [19602.104019] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19602.108744] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
>>>>>>>>> [19602.169030] ath9k: Set channel: 2432 MHz
>>>>>>>>> [19602.169040] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19602.169144] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
>>>>>>>>> [19602.230009] ath9k: Set channel: 2437 MHz
>>>>>>>>> [19602.230012] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19602.230100] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
>>>>>>>>> [19602.291015] ath9k: Set channel: 2442 MHz
>>>>>>>>> [19602.291019] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19602.291110] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
>>>>>>>>> [19602.352012] ath9k: Set channel: 2447 MHz
>>>>>>>>> [19602.352016] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19602.352107] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
>>>>>>>>> [19602.413008] ath9k: Set channel: 2452 MHz
>>>>>>>>> [19602.413010] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19602.413097] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
>>>>>>>>> [19602.474007] ath9k: Set channel: 2457 MHz
>>>>>>>>> [19602.474009] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19602.474519] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
>>>>>>>>> [19602.535014] ath9k: Set channel: 2462 MHz
>>>>>>>>> [19602.535019] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19602.535115] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
>>>>>>>>> [19602.596014] ath9k: Set channel: 2467 MHz
>>>>>>>>> [19602.596019] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19602.596115] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
>>>>>>>>> [19602.797021] ath9k: Set channel: 2472 MHz
>>>>>>>>> [19602.797032] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19602.797136] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
>>>>>>>>> [19602.998018] ath9k: Set channel: 2484 MHz
>>>>>>>>> [19602.998025] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19602.998124] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
>>>>>>>>> [19603.199023] ath9k: Set channel: 2462 MHz
>>>>>>>>> [19603.199031] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19603.199198] ath9k: (2484 MHz) -> (2462 MHz), chanwidth: 0
>>>>>>>>> [19603.200703] ath9k: Set HW RX filter: 0x0
>>>>>>>>> [19603.200723] ath9k: Set channel: 2462 MHz
>>>>>>>>> [19603.200728] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>> [19603.200893] ath9k: (2462 MHz) -> (2462 MHz), chanwidth: 0
>>>>>>>>> [19603.205188] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
>>>>>>>>> 3, cw_max: 7, txop: 47
>>>>>>>>> [19603.205203] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
>>>>>>>>> 7, cw_max: 15, txop: 94
>>>>>>>>> [19603.205213] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
>>>>>>>>> 1023, cw_max: 15, txop: 0
>>>>>>>>> [19603.205224] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
>>>>>>>>> 1023, cw_max: 15, txop: 0
>>>>>>>>> [19603.205364] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>> [19603.208182] wlan0: authenticated
>>>>>>>>> [19603.208189] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>> [19603.216915] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
>>>>>>>>> status=0 aid=1)
>>>>>>>>> [19603.216920] wlan0: associated
>>>>>>>>> [19603.216952] ath9k: Choosing rate table for mode: 10
>>>>>>>>> [19603.217411] ath9k: RC Initialized with capabilities: 0x0
>>>>>>>>> [19603.217420] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
>>>>>>>>> 3, cw_max: 7, txop: 47
>>>>>>>>> [19603.217437] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
>>>>>>>>> 7, cw_max: 15, txop: 94
>>>>>>>>> [19603.217451] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
>>>>>>>>> 1023, cw_max: 15, txop: 0
>>>>>>>>> [19603.217466] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
>>>>>>>>> 1023, cw_max: 15, txop: 0
>>>>>>>>> [19603.217536] ath9k: RX filter 0x0 bssid 00:1e:58:b4:f6:83 aid 0x0
>>>>>>>>> [19603.217541] ath9k: BSS Changed PREAMBLE 1
>>>>>>>>> [19603.217546] ath9k: BSS Changed ASSOC 1
>>>>>>>>> [19603.217550] ath9k: Bss Info ASSOC 1, bssid: 00:1e:58:b4:f6:83
>>>>>>>>> [19603.218918] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>>>>>>>>> [19603.218977] ath9k: Set HW RX filter: 0x0
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I am off to bed, i live in GMT0(+1) time zone
>>>>>>>>> Hopefully see ya tomorrow.
>>>>>>>>> Is there an IRC channel or anything? this is just slow.
>>>>>>>>> Regards
>>>>>>>>> Dmitri
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>> Hello Luis.
>>>>>>>>
>>>>>>>> I don't mean to rush you, was only wandering, what is story with report
>>>>>>>> i have submitted, any progress on it yet?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> So I am working on other items and was hoping someone else could tackle this
>>>>>>> but it seems everyone has been busy with other items as well. I'll try to help
>>>>>>> you with this but I'm as in the dark with this issue as you are right now. We'll
>>>>>>> need to debug futher.
>>>>>>>
>>>>>>> Did you see the other thread about a similar issue? It seemed the person was
>>>>>>> running Network Manager (and that spawns it own wpa_supplicant).
>>>>>>>
>>>>>>> Just to confirm -- are you certain you don't have any instance of nm-applet,
>>>>>>> NetworkManager or a wpa_supplicant running in the background?
>>>>>>>
>>>>>>> Luis
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> Hello Luis.
>>>>>>
>>>>>> I have no idea what is nm-applet. I am as close to bare bones as
>>>>>> possible. I am using gentoo distribution, it by design is not using any
>>>>>> graphical interfaces. to set up network, you have to set it up initially
>>>>>> manually(using available comands or text editor), it doesn't even have
>>>>>> DHCP client by default!
>>>>>> typically if what you have mentioned is part of start up scripts - i
>>>>>> would know about it.(since most of them if not installed by default -
>>>>>> are not starting up by default)
>>>>>>
>>>>>> emerge -s nm-applet
>>>>>> Searching...
>>>>>> [ Results for search key : nm-applet ]
>>>>>> [ Applications found : 1 ]
>>>>>>
>>>>>> * gnome-extra/nm-applet
>>>>>> Latest version available: 0.6.6
>>>>>> Latest version installed: [ Not Installed ]
>>>>>>
>>>>>> I am not sure what is "wpa_supplicant", since from what i understand
>>>>>> it's not user land executable.
>>>>>>
>>>>>> rc-status
>>>>>> Runlevel: default
>>>>>> acpid
>>>>>> [ started ]
>>>>>> alsasound
>>>>>> [ started ]
>>>>>> clamd
>>>>>> [ started ]
>>>>>> hald
>>>>>> [ started ]
>>>>>> hdparm
>>>>>> [ started ]
>>>>>> lm_sensors
>>>>>> [ started ]
>>>>>> local
>>>>>> [ started ]
>>>>>> netmount
>>>>>> [ started ]
>>>>>> smartd
>>>>>> [ started ]
>>>>>> syslog-ng
>>>>>> [ started ]
>>>>>>
>>>>>> All my network settings are done explicitly by hands or with use of
>>>>>> command line dhcp client. There is only one automated network script.,
>>>>>> which runs dhcp client on any available ethernet interface, which is my
>>>>>> eth0 card.
>>>>>>
>>>>>> emerge -s wpa_supplicant
>>>>>> Searching...
>>>>>> [ Results for search key : wpa_supplicant ]
>>>>>> [ Applications found : 1 ]
>>>>>>
>>>>>> * net-wireless/wpa_supplicant
>>>>>> Latest version available: 0.6.4
>>>>>> Latest version installed: [ Not Installed ]
>>>>>> Size of files: 972 kB
>>>>>> Homepage: http://hostap.epitest.fi/wpa_supplicant/
>>>>>> Description: IEEE 802.1X/WPA supplicant for secure wireless
>>>>>> transfers
>>>>>> License: || ( GPL-2 BSD )
>>>>>>
>>>>>> No gnome networking software is installed, at least not running for sure.
>>>>>> i can send you output of pstree if you like,
>>>>>>
>>>>>>
>>>>>>
>>>>> Yes, send that please. wpa_supplicant is a userspace application, used for
>>>>> connecting to WPA / WPA2 networks. It also is also responsible for roaming
>>>>> for us in Linux. Network Manager uses it on the GNOME / KDE desktop, and the
>>>>> applet on the top right hand side of the desktop that lets you select which
>>>>> wireless network to connect to is the "nm-applet".
>>>>>
>>>>> Luis
>>>>>
>>>>>
>>>>>
>>>> Sure, if you look carefully into emerge outputs i have send previously -
>>>> you will see, that none of those packages are actually installed!
>>>>
>>>>
>>> Hello Luis.
>>>
>>> Just wondering is there any update on the problem? Is there anything I
>>> can do to help identify problem?
>>>
>
> Dmitri, can you provide a tcmpdump (pcap) capture of this?
>
> Luis
>
Hello Luis,
I assume you have misspelled, (i am not familiar with tcmpdump anyway).
Please see attachment for step by step log.
Let me know what you want me to do next.
Regards
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: tcpdump experiment.txt
Url: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20090615/4e77d59d/attachment-0001.txt
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
[not found] ` <20090616003715.GA5492@tesla>
@ 2009-07-25 0:49 ` Dmitri Seletski
2009-07-25 17:37 ` Senthilkumar Balasubramanian
0 siblings, 1 reply; 39+ messages in thread
From: Dmitri Seletski @ 2009-07-25 0:49 UTC (permalink / raw)
To: ath9k-devel
Luis R. Rodriguez wrote:
> On Mon, Jun 15, 2009 at 03:49:29PM -0700, Dmitri Seletski wrote:
>
>> Dmitri Seletski wrote:
>>
>>> Luis R. Rodriguez wrote:
>>>
>>>
>>>> On Mon, Jun 15, 2009 at 09:01:44AM -0700, Luis Rodriguez wrote:
>>>>
>>>>
>>>>
>>>>> On Sat, Jun 13, 2009 at 05:35:24PM -0700, Dmitri Seletski wrote:
>>>>>
>>>>>
>>>>>
>>>>>> Dmitri Seletski wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Luis R. Rodriguez wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> On Tue, Jun 09, 2009 at 02:59:23PM -0700, Dmitri Seletski wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> Luis R. Rodriguez wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> On Tue, Jun 09, 2009 at 08:56:01AM -0700, Dmitri Seletski wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> Dmitri Seletski wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> Luis R. Rodriguez wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>> On Mon, May 18, 2009 at 4:59 PM, Luis R. Rodriguez
>>>>>>>>>>>>> <lrodriguez@atheros.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri Seletski wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Luis R. Rodriguez wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski <drjoms@gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> compat-wireless-2009-05-19 # grep CONFIG_MAC80211_DEFAULT_PS config.mk
>>>>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS=n
>>>>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> make :)
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> make unload
>>>>>>>>>>>>>>>>> make install
>>>>>>>>>>>>>>>>> modprobe ath9k
>>>>>>>>>>>>>>>>> ip link set wlan0 up
>>>>>>>>>>>>>>>>> iwconfig wlan0 essid dlink
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> last (IMHO)relevan't dmesg messages(got loads of dmesg history today)
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>>>>>>>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
>>>>>>>>>>>>>>>>> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>>>>>>>>>>>>>>>>> [14216.110829] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>>>>>>>>>>>>>>>>> [14216.310267] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>>>>>>>>>>>>>>>>> [14216.316846] wlan0 direct probe responded
>>>>>>>>>>>>>>>>> [14216.316848] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>>>>> [14216.320962] wlan0: authenticated
>>>>>>>>>>>>>>>>> [14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>>>>> [14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>>>>> [14216.527099] wlan0: deauthenticated (Reason: 9)
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I believe reason 9 is you're AP tells you that you are trying to
>>>>>>>>>>>>>>>> associate to it without first having authenticated.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> [14217.527273] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>>>>>>>>>>>>>>>>> [14217.727264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 timed out
>>>>>>>>>>>>>>>>> [14231.356054] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>>>>> [14231.359188] wlan0: authenticated
>>>>>>>>>>>>>>>>> [14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>>>>> [14231.367102] wlan0: deauthenticated (Reason: 9)
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> And we repeat this here.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> [14232.367277] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>>>>>>>>>>>>>>>>> [14232.567284] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2
>>>>>>>>>>>>>>>>> [14232.570837] wlan0 direct probe responded
>>>>>>>>>>>>>>>>> [14232.570843] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>>>>> [14232.573250] wlan0: authenticated
>>>>>>>>>>>>>>>>> [14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>>>>> [14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>>>>> [14232.780130] wlan0: deauthenticated (Reason: 9)
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> And here.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> [14233.780276] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3
>>>>>>>>>>>>>>>>> [14233.784639] wlan0 direct probe responded
>>>>>>>>>>>>>>>>> [14233.784645] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>>>>> [14233.799082] wlan0: authenticated
>>>>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Access point in N mode only currently.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hm OK.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Switching to mixture of N, G, B and dmesg throws this:
>>>>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>>>>>>>>>>>>>>>> [14435.358964] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>>>>> [14435.362920] wlan0: authenticated
>>>>>>>>>>>>>>>>> [14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>>>>>>> [14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
>>>>>>>>>>>>>>>>> status=0 aid=1)
>>>>>>>>>>>>>>>>> [14435.371752] wlan0: associated
>>>>>>>>>>>>>>>>> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>>>>>>>>>>>>>>>>> [14435.839637] wlan0: disassociated (Reason: 8)
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> This is the STA has left. Hm, lets try upgrading your supplicant...
>>>>>>>>>>>>>>>> Can you try upgrading to the latest from git?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> git://w1.fi/srv/git/hostap.git
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Luis
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hello Luis.
>>>>>>>>>>>>>>> I have no idea what authentication you are talking about.
>>>>>>>>>>>>>>> I am sure that i dont use any authentication.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I'm talking about the 802.11 authentication which is always
>>>>>>>>>>>>>> required prior to association (even when no encryption is enabled).
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Can you try a newer wpa_supplicant to see if that helps?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> That is, use a plaintext supplicant as follows:
>>>>>>>>>>>>>
>>>>>>>>>>>>> mcgrof at tesla ~ $ cat plaintext.conf
>>>>>>>>>>>>> ctrl_interface=/var/run/wpa_supplicant
>>>>>>>>>>>>> ap_scan=1
>>>>>>>>>>>>> network={
>>>>>>>>>>>>> key_mgmt=NONE
>>>>>>>>>>>>> ssid="your-ssid"
>>>>>>>>>>>>> scan_ssid=1
>>>>>>>>>>>>> }
>>>>>>>>>>>>>
>>>>>>>>>>>>> wpa_supplicant -i wlan0 -c plaintext.conf
>>>>>>>>>>>>>
>>>>>>>>>>>>> Luis
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>> Hello Luis.
>>>>>>>>>>>>
>>>>>>>>>>>> ou man, you scared shi* out of me :)
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> dimko wpa_supplicant # modprobe -r ath9k
>>>>>>>>>>>> dimko wpa_supplicant # modprobe ath9k debug=0x00000200
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> [19251.514273] wlan0: deauthenticating by local choice (reason=3)
>>>>>>>>>>>> [19251.808278] ath9k 0000:01:07.0: PCI INT A disabled
>>>>>>>>>>>> [19251.808327] ath9k: Driver unloaded
>>>>>>>>>>>> [19288.173497] cfg80211: Calling CRDA to update world regulatory domain
>>>>>>>>>>>> [19288.277348] ath9k 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 19
>>>>>>>>>>>> (level, low) -> IRQ 19
>>>>>>>>>>>> [19288.703537] ath9k: Eeprom VER: 14, REV: 2
>>>>>>>>>>>> [19288.704291] ath: Country alpha2 being used: AM
>>>>>>>>>>>> [19288.704292] ath: Regpair detected: 0x30
>>>>>>>>>>>> [19288.704294] ath9k: Rate: 1Mbps, ratecode: 27
>>>>>>>>>>>> [19288.704295] ath9k: Rate: 2Mbps, ratecode: 26
>>>>>>>>>>>> [19288.704297] ath9k: Rate: 5Mbps, ratecode: 25
>>>>>>>>>>>> [19288.704298] ath9k: Rate: 11Mbps, ratecode: 24
>>>>>>>>>>>> [19288.704299] ath9k: Rate: 6Mbps, ratecode: 11
>>>>>>>>>>>> [19288.704300] ath9k: Rate: 9Mbps, ratecode: 15
>>>>>>>>>>>> [19288.704302] ath9k: Rate: 12Mbps, ratecode: 10
>>>>>>>>>>>> [19288.704303] ath9k: Rate: 18Mbps, ratecode: 14
>>>>>>>>>>>> [19288.704304] ath9k: Rate: 24Mbps, ratecode: 9
>>>>>>>>>>>> [19288.704305] ath9k: Rate: 36Mbps, ratecode: 13
>>>>>>>>>>>> [19288.704306] ath9k: Rate: 48Mbps, ratecode: 8
>>>>>>>>>>>> [19288.704307] ath9k: Rate: 54Mbps, ratecode: 12
>>>>>>>>>>>> [19288.704309] ath9k: Rate: 6Mbps, ratecode: 11
>>>>>>>>>>>> [19288.704310] ath9k: Rate: 9Mbps, ratecode: 15
>>>>>>>>>>>> [19288.704311] ath9k: Rate: 12Mbps, ratecode: 10
>>>>>>>>>>>> [19288.704312] ath9k: Rate: 18Mbps, ratecode: 14
>>>>>>>>>>>> [19288.704313] ath9k: Rate: 24Mbps, ratecode: 9
>>>>>>>>>>>> [19288.704315] ath9k: Rate: 36Mbps, ratecode: 13
>>>>>>>>>>>> [19288.704316] ath9k: Rate: 48Mbps, ratecode: 8
>>>>>>>>>>>> [19288.704317] ath9k: Rate: 54Mbps, ratecode: 12
>>>>>>>>>>>> [19288.704339] ath9k: tx DMA: 512 buffers 1 desc/buf
>>>>>>>>>>>> [19288.704379] ath9k: tx DMA map: ffff88009f400000 (77824) -> 0 (77824)
>>>>>>>>>>>> [19288.704406] ath9k: beacon DMA: 4 buffers 1 desc/buf
>>>>>>>>>>>> [19288.704408] ath9k: beacon DMA map: ffff88009f577000 (608) -> 0 (608)
>>>>>>>>>>>> [19288.704410] ath9k: cachelsz 64 rxbufsize 3904
>>>>>>>>>>>> [19288.704412] ath9k: rx DMA: 512 buffers 1 desc/buf
>>>>>>>>>>>> [19288.704455] ath9k: rx DMA map: ffff8800ac560000 (77824) -> 0 (77824)
>>>>>>>>>>>> [19288.707111] phy0: Selected rate control algorithm 'ath9k_rate_control'
>>>>>>>>>>>> [19288.707656] cfg80211: Calling CRDA for country: AM
>>>>>>>>>>>> [19288.707680] Registered led device: ath9k-phy0::radio
>>>>>>>>>>>> [19288.707689] Registered led device: ath9k-phy0::assoc
>>>>>>>>>>>> [19288.707699] Registered led device: ath9k-phy0::tx
>>>>>>>>>>>> [19288.707711] Registered led device: ath9k-phy0::rx
>>>>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> ip link set wlan0 up
>>>>>>>>>>>>
>>>>>>>>>>>> [19365.389282] ath9k: Starting driver with initial channel: 2412 MHz
>>>>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
>>>>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
>>>>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
>>>>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
>>>>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
>>>>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
>>>>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
>>>>>>>>>>>> 7, cw_max: 15, txop: 102
>>>>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
>>>>>>>>>>>> 15, cw_max: 31, txop: 188
>>>>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
>>>>>>>>>>>> 1023, cw_max: 31, txop: 0
>>>>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
>>>>>>>>>>>> 1023, cw_max: 31, txop: 0
>>>>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
>>>>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
>>>>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>>>>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
>>>>>>>>>>>>
>>>>>>>>>>>> iwconfig wlan0 essid dlink
>>>>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81:
>>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
>>>>>>>>>>>> [19365.389282] ath9k: Starting driver with initial channel: 2412 MHz
>>>>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
>>>>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
>>>>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
>>>>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
>>>>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
>>>>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
>>>>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
>>>>>>>>>>>> 7, cw_max: 15, txop: 102
>>>>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
>>>>>>>>>>>> 15, cw_max: 31, txop: 188
>>>>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
>>>>>>>>>>>> 1023, cw_max: 31, txop: 0
>>>>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
>>>>>>>>>>>> 1023, cw_max: 31, txop: 0
>>>>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
>>>>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
>>>>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>>>>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
>>>>>>>>>>>> [19457.759393] ath9k: Set HW RX filter: 0x10
>>>>>>>>>>>> [19457.789264] ath9k: Set channel: 2412 MHz
>>>>>>>>>>>> [19457.789270] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19457.789373] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
>>>>>>>>>>>> [19457.853264] ath9k: Set channel: 2417 MHz
>>>>>>>>>>>> [19457.853269] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19457.853363] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
>>>>>>>>>>>> [19457.914263] ath9k: Set channel: 2422 MHz
>>>>>>>>>>>> [19457.914268] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19457.918980] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
>>>>>>>>>>>> [19457.980263] ath9k: Set channel: 2427 MHz
>>>>>>>>>>>> [19457.980268] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19457.980363] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
>>>>>>>>>>>> [19458.041263] ath9k: Set channel: 2432 MHz
>>>>>>>>>>>> [19458.041268] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19458.041363] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
>>>>>>>>>>>> [19458.102264] ath9k: Set channel: 2437 MHz
>>>>>>>>>>>> [19458.102271] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19458.102368] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
>>>>>>>>>>>> [19458.163262] ath9k: Set channel: 2442 MHz
>>>>>>>>>>>> [19458.163267] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19458.163360] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
>>>>>>>>>>>> [19458.235263] ath9k: Set channel: 2447 MHz
>>>>>>>>>>>> [19458.235269] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19458.235450] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
>>>>>>>>>>>> [19458.296257] ath9k: Set channel: 2452 MHz
>>>>>>>>>>>> [19458.296258] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19458.296344] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
>>>>>>>>>>>> [19458.357257] ath9k: Set channel: 2457 MHz
>>>>>>>>>>>> [19458.357258] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19458.357344] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
>>>>>>>>>>>> [19458.418257] ath9k: Set channel: 2462 MHz
>>>>>>>>>>>> [19458.418258] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19458.418344] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
>>>>>>>>>>>> [19458.479263] ath9k: Set channel: 2467 MHz
>>>>>>>>>>>> [19458.479267] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19458.479362] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
>>>>>>>>>>>> [19458.680270] ath9k: Set channel: 2472 MHz
>>>>>>>>>>>> [19458.680280] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19458.680381] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
>>>>>>>>>>>> [19458.881265] ath9k: Set channel: 2484 MHz
>>>>>>>>>>>> [19458.881270] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19458.881367] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
>>>>>>>>>>>> [19459.082271] ath9k: Set channel: 2412 MHz
>>>>>>>>>>>> [19459.082278] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19459.082452] ath9k: (2484 MHz) -> (2412 MHz), chanwidth: 0
>>>>>>>>>>>> [19459.084497] ath9k: Set HW RX filter: 0x0
>>>>>>>>>>>> [19459.085175] ath9k: Set channel: 2462 MHz
>>>>>>>>>>>> [19459.091031] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19459.091252] ath9k: (2412 MHz) -> (2462 MHz), chanwidth: 0
>>>>>>>>>>>> [19459.095097] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
>>>>>>>>>>>> 3, cw_max: 7, txop: 47
>>>>>>>>>>>> [19459.095114] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
>>>>>>>>>>>> 7, cw_max: 15, txop: 94
>>>>>>>>>>>> [19459.095125] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
>>>>>>>>>>>> 1023, cw_max: 15, txop: 0
>>>>>>>>>>>> [19459.095136] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
>>>>>>>>>>>> 1023, cw_max: 15, txop: 0
>>>>>>>>>>>> [19459.095272] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>> [19459.099880] wlan0: authenticated
>>>>>>>>>>>> [19459.099885] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>> [19459.299265] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>> [19459.306086] wlan0: deauthenticated (Reason: 9)
>>>>>>>>>>>> [19460.306269] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
>>>>>>>>>>>> [19460.316796] wlan0 direct probe responded
>>>>>>>>>>>> [19460.316801] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>> [19460.319702] wlan0: authenticated
>>>>>>>>>>>> [19460.319707] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> this is while ap is in N mode.
>>>>>>>>>>>>
>>>>>>>>>>>> This is after i set it mixed NBG:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out
>>>>>>>>>>>> [19601.885667] ath9k: Set HW RX filter: 0x10
>>>>>>>>>>>> [19601.917026] ath9k: Set channel: 2412 MHz
>>>>>>>>>>>> [19601.917034] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19601.917192] ath9k: (2462 MHz) -> (2412 MHz), chanwidth: 0
>>>>>>>>>>>> [19601.978014] ath9k: Set channel: 2417 MHz
>>>>>>>>>>>> [19601.978019] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19601.978114] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
>>>>>>>>>>>> [19602.039014] ath9k: Set channel: 2422 MHz
>>>>>>>>>>>> [19602.039018] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19602.043759] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
>>>>>>>>>>>> [19602.104014] ath9k: Set channel: 2427 MHz
>>>>>>>>>>>> [19602.104019] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19602.108744] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
>>>>>>>>>>>> [19602.169030] ath9k: Set channel: 2432 MHz
>>>>>>>>>>>> [19602.169040] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19602.169144] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
>>>>>>>>>>>> [19602.230009] ath9k: Set channel: 2437 MHz
>>>>>>>>>>>> [19602.230012] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19602.230100] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
>>>>>>>>>>>> [19602.291015] ath9k: Set channel: 2442 MHz
>>>>>>>>>>>> [19602.291019] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19602.291110] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
>>>>>>>>>>>> [19602.352012] ath9k: Set channel: 2447 MHz
>>>>>>>>>>>> [19602.352016] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19602.352107] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
>>>>>>>>>>>> [19602.413008] ath9k: Set channel: 2452 MHz
>>>>>>>>>>>> [19602.413010] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19602.413097] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
>>>>>>>>>>>> [19602.474007] ath9k: Set channel: 2457 MHz
>>>>>>>>>>>> [19602.474009] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19602.474519] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
>>>>>>>>>>>> [19602.535014] ath9k: Set channel: 2462 MHz
>>>>>>>>>>>> [19602.535019] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19602.535115] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
>>>>>>>>>>>> [19602.596014] ath9k: Set channel: 2467 MHz
>>>>>>>>>>>> [19602.596019] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19602.596115] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
>>>>>>>>>>>> [19602.797021] ath9k: Set channel: 2472 MHz
>>>>>>>>>>>> [19602.797032] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19602.797136] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
>>>>>>>>>>>> [19602.998018] ath9k: Set channel: 2484 MHz
>>>>>>>>>>>> [19602.998025] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19602.998124] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
>>>>>>>>>>>> [19603.199023] ath9k: Set channel: 2462 MHz
>>>>>>>>>>>> [19603.199031] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19603.199198] ath9k: (2484 MHz) -> (2462 MHz), chanwidth: 0
>>>>>>>>>>>> [19603.200703] ath9k: Set HW RX filter: 0x0
>>>>>>>>>>>> [19603.200723] ath9k: Set channel: 2462 MHz
>>>>>>>>>>>> [19603.200728] ath9k: tx chmask: 1, rx chmask: 1
>>>>>>>>>>>> [19603.200893] ath9k: (2462 MHz) -> (2462 MHz), chanwidth: 0
>>>>>>>>>>>> [19603.205188] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
>>>>>>>>>>>> 3, cw_max: 7, txop: 47
>>>>>>>>>>>> [19603.205203] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
>>>>>>>>>>>> 7, cw_max: 15, txop: 94
>>>>>>>>>>>> [19603.205213] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
>>>>>>>>>>>> 1023, cw_max: 15, txop: 0
>>>>>>>>>>>> [19603.205224] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
>>>>>>>>>>>> 1023, cw_max: 15, txop: 0
>>>>>>>>>>>> [19603.205364] wlan0: authenticate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>> [19603.208182] wlan0: authenticated
>>>>>>>>>>>> [19603.208189] wlan0: associate with AP 00:1e:58:b4:f6:83
>>>>>>>>>>>> [19603.216915] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421
>>>>>>>>>>>> status=0 aid=1)
>>>>>>>>>>>> [19603.216920] wlan0: associated
>>>>>>>>>>>> [19603.216952] ath9k: Choosing rate table for mode: 10
>>>>>>>>>>>> [19603.217411] ath9k: RC Initialized with capabilities: 0x0
>>>>>>>>>>>> [19603.217420] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min:
>>>>>>>>>>>> 3, cw_max: 7, txop: 47
>>>>>>>>>>>> [19603.217437] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min:
>>>>>>>>>>>> 7, cw_max: 15, txop: 94
>>>>>>>>>>>> [19603.217451] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min:
>>>>>>>>>>>> 1023, cw_max: 15, txop: 0
>>>>>>>>>>>> [19603.217466] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min:
>>>>>>>>>>>> 1023, cw_max: 15, txop: 0
>>>>>>>>>>>> [19603.217536] ath9k: RX filter 0x0 bssid 00:1e:58:b4:f6:83 aid 0x0
>>>>>>>>>>>> [19603.217541] ath9k: BSS Changed PREAMBLE 1
>>>>>>>>>>>> [19603.217546] ath9k: BSS Changed ASSOC 1
>>>>>>>>>>>> [19603.217550] ath9k: Bss Info ASSOC 1, bssid: 00:1e:58:b4:f6:83
>>>>>>>>>>>> [19603.218918] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>>>>>>>>>>>> [19603.218977] ath9k: Set HW RX filter: 0x0
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> I am off to bed, i live in GMT0(+1) time zone
>>>>>>>>>>>> Hopefully see ya tomorrow.
>>>>>>>>>>>> Is there an IRC channel or anything? this is just slow.
>>>>>>>>>>>> Regards
>>>>>>>>>>>> Dmitri
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>> Hello Luis.
>>>>>>>>>>>
>>>>>>>>>>> I don't mean to rush you, was only wandering, what is story with report
>>>>>>>>>>> i have submitted, any progress on it yet?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>> So I am working on other items and was hoping someone else could tackle this
>>>>>>>>>> but it seems everyone has been busy with other items as well. I'll try to help
>>>>>>>>>> you with this but I'm as in the dark with this issue as you are right now. We'll
>>>>>>>>>> need to debug futher.
>>>>>>>>>>
>>>>>>>>>> Did you see the other thread about a similar issue? It seemed the person was
>>>>>>>>>> running Network Manager (and that spawns it own wpa_supplicant).
>>>>>>>>>>
>>>>>>>>>> Just to confirm -- are you certain you don't have any instance of nm-applet,
>>>>>>>>>> NetworkManager or a wpa_supplicant running in the background?
>>>>>>>>>>
>>>>>>>>>> Luis
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>> Hello Luis.
>>>>>>>>>
>>>>>>>>> I have no idea what is nm-applet. I am as close to bare bones as
>>>>>>>>> possible. I am using gentoo distribution, it by design is not using any
>>>>>>>>> graphical interfaces. to set up network, you have to set it up initially
>>>>>>>>> manually(using available comands or text editor), it doesn't even have
>>>>>>>>> DHCP client by default!
>>>>>>>>> typically if what you have mentioned is part of start up scripts - i
>>>>>>>>> would know about it.(since most of them if not installed by default -
>>>>>>>>> are not starting up by default)
>>>>>>>>>
>>>>>>>>> emerge -s nm-applet
>>>>>>>>> Searching...
>>>>>>>>> [ Results for search key : nm-applet ]
>>>>>>>>> [ Applications found : 1 ]
>>>>>>>>>
>>>>>>>>> * gnome-extra/nm-applet
>>>>>>>>> Latest version available: 0.6.6
>>>>>>>>> Latest version installed: [ Not Installed ]
>>>>>>>>>
>>>>>>>>> I am not sure what is "wpa_supplicant", since from what i understand
>>>>>>>>> it's not user land executable.
>>>>>>>>>
>>>>>>>>> rc-status
>>>>>>>>> Runlevel: default
>>>>>>>>> acpid
>>>>>>>>> [ started ]
>>>>>>>>> alsasound
>>>>>>>>> [ started ]
>>>>>>>>> clamd
>>>>>>>>> [ started ]
>>>>>>>>> hald
>>>>>>>>> [ started ]
>>>>>>>>> hdparm
>>>>>>>>> [ started ]
>>>>>>>>> lm_sensors
>>>>>>>>> [ started ]
>>>>>>>>> local
>>>>>>>>> [ started ]
>>>>>>>>> netmount
>>>>>>>>> [ started ]
>>>>>>>>> smartd
>>>>>>>>> [ started ]
>>>>>>>>> syslog-ng
>>>>>>>>> [ started ]
>>>>>>>>>
>>>>>>>>> All my network settings are done explicitly by hands or with use of
>>>>>>>>> command line dhcp client. There is only one automated network script.,
>>>>>>>>> which runs dhcp client on any available ethernet interface, which is my
>>>>>>>>> eth0 card.
>>>>>>>>>
>>>>>>>>> emerge -s wpa_supplicant
>>>>>>>>> Searching...
>>>>>>>>> [ Results for search key : wpa_supplicant ]
>>>>>>>>> [ Applications found : 1 ]
>>>>>>>>>
>>>>>>>>> * net-wireless/wpa_supplicant
>>>>>>>>> Latest version available: 0.6.4
>>>>>>>>> Latest version installed: [ Not Installed ]
>>>>>>>>> Size of files: 972 kB
>>>>>>>>> Homepage: http://hostap.epitest.fi/wpa_supplicant/
>>>>>>>>> Description: IEEE 802.1X/WPA supplicant for secure wireless
>>>>>>>>> transfers
>>>>>>>>> License: || ( GPL-2 BSD )
>>>>>>>>>
>>>>>>>>> No gnome networking software is installed, at least not running for sure.
>>>>>>>>> i can send you output of pstree if you like,
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>> Yes, send that please. wpa_supplicant is a userspace application, used for
>>>>>>>> connecting to WPA / WPA2 networks. It also is also responsible for roaming
>>>>>>>> for us in Linux. Network Manager uses it on the GNOME / KDE desktop, and the
>>>>>>>> applet on the top right hand side of the desktop that lets you select which
>>>>>>>> wireless network to connect to is the "nm-applet".
>>>>>>>>
>>>>>>>> Luis
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> Sure, if you look carefully into emerge outputs i have send previously -
>>>>>>> you will see, that none of those packages are actually installed!
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> Hello Luis.
>>>>>>
>>>>>> Just wondering is there any update on the problem? Is there anything I
>>>>>> can do to help identify problem?
>>>>>>
>>>>>>
>>>>>>
>>>> Dmitri, can you provide a tcmpdump (pcap) capture of this?
>>>>
>>>> Luis
>>>>
>>>>
>>>>
>>> Hello Luis,
>>> I assume you have misspelled, (i am not familiar with tcmpdump anyway).
>>> Please see attachment for step by step log.
>>> Let me know what you want me to do next.
>>> Regards
>>>
>>>
>> Do you still want me to submit something to kernel.org?
>>
>
> Hm, nah, someone will follow up with you soon, if not just
> reply to the thread (not me).
>
> Luis
>
Hi guys, any news?
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-07-25 0:49 ` Dmitri Seletski
@ 2009-07-25 17:37 ` Senthilkumar Balasubramanian
2009-07-25 18:54 ` Dmitri Seletski
` (2 more replies)
0 siblings, 3 replies; 39+ messages in thread
From: Senthilkumar Balasubramanian @ 2009-07-25 17:37 UTC (permalink / raw)
To: ath9k-devel
Dmirtri
Sorry! for the delayed reply from our side. We have submitted critical bug
fixes in the recent times and most of them were merged into wireless-testing
only recently. I assume you are using a PCI 11n Card (not a PCI-E card).
Also If i have understood the thread correctly, bgn mode shows very low
throughput and N mode doesn't connect at all.
Please try the latest wireless-testing and in the mean while, let me work on
some instrumentation code for you.
Also if possible, please provide us the wireshark packet capture. You have
to run the following command to create a monitor mode interface and capture
the frames on "moni0" interface using wireshark when the problem happens.
Please capture for both bgn and n only modes.
iw phy phy0 interface add moni0 type monitor
Please refer to for more information on how to add a monitor mode interface
using which you can capture wireless frames in wireshark tool.
http://linuxwireless.org/en/users/Documentation/iw
Thanks
Senthil
On Sat, Jul 25, 2009 at 6:19 AM, Dmitri Seletski <drjoms@gmail.com> wrote:
> Luis R. Rodriguez wrote:
> > On Mon, Jun 15, 2009 at 03:49:29PM -0700, Dmitri Seletski wrote:
> >
> >> Dmitri Seletski wrote:
> >>
> >>> Luis R. Rodriguez wrote:
> >>>
> >>>
> >>>> On Mon, Jun 15, 2009 at 09:01:44AM -0700, Luis Rodriguez wrote:
> >>>>
> >>>>
> >>>>
> >>>>> On Sat, Jun 13, 2009 at 05:35:24PM -0700, Dmitri Seletski wrote:
> >>>>>
> >>>>>
> >>>>>
> >>>>>> Dmitri Seletski wrote:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>> On Tue, Jun 09, 2009 at 02:59:23PM -0700, Dmitri Seletski wrote:
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>> On Tue, Jun 09, 2009 at 08:56:01AM -0700, Dmitri Seletski wrote:
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>> Dmitri Seletski wrote:
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>> On Mon, May 18, 2009 at 4:59 PM, Luis R. Rodriguez
> >>>>>>>>>>>>> <lrodriguez@atheros.com> wrote:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>> On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri Seletski
> wrote:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski <
> drjoms at gmail.com> wrote:
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> compat-wireless-2009-05-19 # grep
> CONFIG_MAC80211_DEFAULT_PS config.mk
> >>>>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS=n
> >>>>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> make :)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> make unload
> >>>>>>>>>>>>>>>>> make install
> >>>>>>>>>>>>>>>>> modprobe ath9k
> >>>>>>>>>>>>>>>>> ip link set wlan0 up
> >>>>>>>>>>>>>>>>> iwconfig wlan0 essid dlink
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> last (IMHO)relevan't dmesg messages(got loads of dmesg
> history today)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133
> RF Rev:81:
> >>>>>>>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> >>>>>>>>>>>>>>>>> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not
> ready
> >>>>>>>>>>>>>>>>> [14216.110829] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 1
> >>>>>>>>>>>>>>>>> [14216.310267] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 2
> >>>>>>>>>>>>>>>>> [14216.316846] wlan0 direct probe responded
> >>>>>>>>>>>>>>>>> [14216.316848] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14216.320962] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14216.527099] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> I believe reason 9 is you're AP tells you that you are
> trying to
> >>>>>>>>>>>>>>>> associate to it without first having authenticated.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14217.527273] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 3
> >>>>>>>>>>>>>>>>> [14217.727264] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>>>>>> [14231.356054] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14231.359188] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14231.367102] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> And we repeat this here.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14232.367277] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 1
> >>>>>>>>>>>>>>>>> [14232.567284] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 2
> >>>>>>>>>>>>>>>>> [14232.570837] wlan0 direct probe responded
> >>>>>>>>>>>>>>>>> [14232.570843] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14232.573250] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14232.780130] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> And here.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14233.780276] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 3
> >>>>>>>>>>>>>>>>> [14233.784639] wlan0 direct probe responded
> >>>>>>>>>>>>>>>>> [14233.784645] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14233.799082] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> Access point in N mode only currently.
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Hm OK.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> Switching to mixture of N, G, B and dmesg throws this:
> >>>>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>>>>>> [14435.358964] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14435.362920] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83
> (capab=0x421
> >>>>>>>>>>>>>>>>> status=0 aid=1)
> >>>>>>>>>>>>>>>>> [14435.371752] wlan0: associated
> >>>>>>>>>>>>>>>>> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link
> becomes ready
> >>>>>>>>>>>>>>>>> [14435.839637] wlan0: disassociated (Reason: 8)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> This is the STA has left. Hm, lets try upgrading your
> supplicant...
> >>>>>>>>>>>>>>>> Can you try upgrading to the latest from git?
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> git://w1.fi/srv/git/hostap.git
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Luis
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Hello Luis.
> >>>>>>>>>>>>>>> I have no idea what authentication you are talking about.
> >>>>>>>>>>>>>>> I am sure that i dont use any authentication.
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>> I'm talking about the 802.11 authentication which is always
> >>>>>>>>>>>>>> required prior to association (even when no encryption is
> enabled).
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Can you try a newer wpa_supplicant to see if that helps?
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>> That is, use a plaintext supplicant as follows:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> mcgrof at tesla ~ $ cat plaintext.conf
> >>>>>>>>>>>>> ctrl_interface=/var/run/wpa_supplicant
> >>>>>>>>>>>>> ap_scan=1
> >>>>>>>>>>>>> network={
> >>>>>>>>>>>>> key_mgmt=NONE
> >>>>>>>>>>>>> ssid="your-ssid"
> >>>>>>>>>>>>> scan_ssid=1
> >>>>>>>>>>>>> }
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> wpa_supplicant -i wlan0 -c plaintext.conf
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Luis
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>> Hello Luis.
> >>>>>>>>>>>>
> >>>>>>>>>>>> ou man, you scared shi* out of me :)
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> dimko wpa_supplicant # modprobe -r ath9k
> >>>>>>>>>>>> dimko wpa_supplicant # modprobe ath9k debug=0x00000200
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> [19251.514273] wlan0: deauthenticating by local choice
> (reason=3)
> >>>>>>>>>>>> [19251.808278] ath9k 0000:01:07.0: PCI INT A disabled
> >>>>>>>>>>>> [19251.808327] ath9k: Driver unloaded
> >>>>>>>>>>>> [19288.173497] cfg80211: Calling CRDA to update world
> regulatory domain
> >>>>>>>>>>>> [19288.277348] ath9k 0000:01:07.0: PCI INT A -> Link[LNKB] ->
> GSI 19
> >>>>>>>>>>>> (level, low) -> IRQ 19
> >>>>>>>>>>>> [19288.703537] ath9k: Eeprom VER: 14, REV: 2
> >>>>>>>>>>>> [19288.704291] ath: Country alpha2 being used: AM
> >>>>>>>>>>>> [19288.704292] ath: Regpair detected: 0x30
> >>>>>>>>>>>> [19288.704294] ath9k: Rate: 1Mbps, ratecode: 27
> >>>>>>>>>>>> [19288.704295] ath9k: Rate: 2Mbps, ratecode: 26
> >>>>>>>>>>>> [19288.704297] ath9k: Rate: 5Mbps, ratecode: 25
> >>>>>>>>>>>> [19288.704298] ath9k: Rate: 11Mbps, ratecode: 24
> >>>>>>>>>>>> [19288.704299] ath9k: Rate: 6Mbps, ratecode: 11
> >>>>>>>>>>>> [19288.704300] ath9k: Rate: 9Mbps, ratecode: 15
> >>>>>>>>>>>> [19288.704302] ath9k: Rate: 12Mbps, ratecode: 10
> >>>>>>>>>>>> [19288.704303] ath9k: Rate: 18Mbps, ratecode: 14
> >>>>>>>>>>>> [19288.704304] ath9k: Rate: 24Mbps, ratecode: 9
> >>>>>>>>>>>> [19288.704305] ath9k: Rate: 36Mbps, ratecode: 13
> >>>>>>>>>>>> [19288.704306] ath9k: Rate: 48Mbps, ratecode: 8
> >>>>>>>>>>>> [19288.704307] ath9k: Rate: 54Mbps, ratecode: 12
> >>>>>>>>>>>> [19288.704309] ath9k: Rate: 6Mbps, ratecode: 11
> >>>>>>>>>>>> [19288.704310] ath9k: Rate: 9Mbps, ratecode: 15
> >>>>>>>>>>>> [19288.704311] ath9k: Rate: 12Mbps, ratecode: 10
> >>>>>>>>>>>> [19288.704312] ath9k: Rate: 18Mbps, ratecode: 14
> >>>>>>>>>>>> [19288.704313] ath9k: Rate: 24Mbps, ratecode: 9
> >>>>>>>>>>>> [19288.704315] ath9k: Rate: 36Mbps, ratecode: 13
> >>>>>>>>>>>> [19288.704316] ath9k: Rate: 48Mbps, ratecode: 8
> >>>>>>>>>>>> [19288.704317] ath9k: Rate: 54Mbps, ratecode: 12
> >>>>>>>>>>>> [19288.704339] ath9k: tx DMA: 512 buffers 1 desc/buf
> >>>>>>>>>>>> [19288.704379] ath9k: tx DMA map: ffff88009f400000 (77824) ->
> 0 (77824)
> >>>>>>>>>>>> [19288.704406] ath9k: beacon DMA: 4 buffers 1 desc/buf
> >>>>>>>>>>>> [19288.704408] ath9k: beacon DMA map: ffff88009f577000 (608)
> -> 0 (608)
> >>>>>>>>>>>> [19288.704410] ath9k: cachelsz 64 rxbufsize 3904
> >>>>>>>>>>>> [19288.704412] ath9k: rx DMA: 512 buffers 1 desc/buf
> >>>>>>>>>>>> [19288.704455] ath9k: rx DMA map: ffff8800ac560000 (77824) ->
> 0 (77824)
> >>>>>>>>>>>> [19288.707111] phy0: Selected rate control algorithm
> 'ath9k_rate_control'
> >>>>>>>>>>>> [19288.707656] cfg80211: Calling CRDA for country: AM
> >>>>>>>>>>>> [19288.707680] Registered led device: ath9k-phy0::radio
> >>>>>>>>>>>> [19288.707689] Registered led device: ath9k-phy0::assoc
> >>>>>>>>>>>> [19288.707699] Registered led device: ath9k-phy0::tx
> >>>>>>>>>>>> [19288.707711] Registered led device: ath9k-phy0::rx
> >>>>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF
> Rev:81:
> >>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> ip link set wlan0 up
> >>>>>>>>>>>>
> >>>>>>>>>>>> [19365.389282] ath9k: Starting driver with initial channel:
> 2412 MHz
> >>>>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
> >>>>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
> >>>>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
> >>>>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
> >>>>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs:
> 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 102
> >>>>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs:
> 2, cw_min:
> >>>>>>>>>>>> 15, cw_max: 31, txop: 188
> >>>>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs:
> 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs:
> 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> >>>>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>>
> >>>>>>>>>>>> iwconfig wlan0 essid dlink
> >>>>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF
> Rev:81:
> >>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> >>>>>>>>>>>> [19365.389282] ath9k: Starting driver with initial channel:
> 2412 MHz
> >>>>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
> >>>>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
> >>>>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
> >>>>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
> >>>>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs:
> 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 102
> >>>>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs:
> 2, cw_min:
> >>>>>>>>>>>> 15, cw_max: 31, txop: 188
> >>>>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs:
> 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs:
> 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> >>>>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19457.759393] ath9k: Set HW RX filter: 0x10
> >>>>>>>>>>>> [19457.789264] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19457.789270] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.789373] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0
> >>>>>>>>>>>> [19457.853264] ath9k: Set channel: 2417 MHz
> >>>>>>>>>>>> [19457.853269] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.853363] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
> >>>>>>>>>>>> [19457.914263] ath9k: Set channel: 2422 MHz
> >>>>>>>>>>>> [19457.914268] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.918980] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
> >>>>>>>>>>>> [19457.980263] ath9k: Set channel: 2427 MHz
> >>>>>>>>>>>> [19457.980268] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.980363] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
> >>>>>>>>>>>> [19458.041263] ath9k: Set channel: 2432 MHz
> >>>>>>>>>>>> [19458.041268] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.041363] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
> >>>>>>>>>>>> [19458.102264] ath9k: Set channel: 2437 MHz
> >>>>>>>>>>>> [19458.102271] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.102368] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
> >>>>>>>>>>>> [19458.163262] ath9k: Set channel: 2442 MHz
> >>>>>>>>>>>> [19458.163267] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.163360] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
> >>>>>>>>>>>> [19458.235263] ath9k: Set channel: 2447 MHz
> >>>>>>>>>>>> [19458.235269] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.235450] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
> >>>>>>>>>>>> [19458.296257] ath9k: Set channel: 2452 MHz
> >>>>>>>>>>>> [19458.296258] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.296344] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
> >>>>>>>>>>>> [19458.357257] ath9k: Set channel: 2457 MHz
> >>>>>>>>>>>> [19458.357258] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.357344] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
> >>>>>>>>>>>> [19458.418257] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19458.418258] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.418344] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
> >>>>>>>>>>>> [19458.479263] ath9k: Set channel: 2467 MHz
> >>>>>>>>>>>> [19458.479267] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.479362] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
> >>>>>>>>>>>> [19458.680270] ath9k: Set channel: 2472 MHz
> >>>>>>>>>>>> [19458.680280] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.680381] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
> >>>>>>>>>>>> [19458.881265] ath9k: Set channel: 2484 MHz
> >>>>>>>>>>>> [19458.881270] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.881367] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
> >>>>>>>>>>>> [19459.082271] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19459.082278] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19459.082452] ath9k: (2484 MHz) -> (2412 MHz), chanwidth: 0
> >>>>>>>>>>>> [19459.084497] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19459.085175] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19459.091031] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19459.091252] ath9k: (2412 MHz) -> (2462 MHz), chanwidth: 0
> >>>>>>>>>>>> [19459.095097] ath9k: Configure tx [queue/halq] [0/3], aifs:
> 2, cw_min:
> >>>>>>>>>>>> 3, cw_max: 7, txop: 47
> >>>>>>>>>>>> [19459.095114] ath9k: Configure tx [queue/halq] [1/2], aifs:
> 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 94
> >>>>>>>>>>>> [19459.095125] ath9k: Configure tx [queue/halq] [2/1], aifs:
> 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19459.095136] ath9k: Configure tx [queue/halq] [3/0], aifs:
> 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19459.095272] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19459.099880] wlan0: authenticated
> >>>>>>>>>>>> [19459.099885] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19459.299265] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19459.306086] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>> [19460.306269] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try
> 1
> >>>>>>>>>>>> [19460.316796] wlan0 direct probe responded
> >>>>>>>>>>>> [19460.316801] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19460.319702] wlan0: authenticated
> >>>>>>>>>>>> [19460.319707] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83
> timed out
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> this is while ap is in N mode.
> >>>>>>>>>>>>
> >>>>>>>>>>>> This is after i set it mixed NBG:
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83
> timed out
> >>>>>>>>>>>> [19601.885667] ath9k: Set HW RX filter: 0x10
> >>>>>>>>>>>> [19601.917026] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19601.917034] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19601.917192] ath9k: (2462 MHz) -> (2412 MHz), chanwidth: 0
> >>>>>>>>>>>> [19601.978014] ath9k: Set channel: 2417 MHz
> >>>>>>>>>>>> [19601.978019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19601.978114] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0
> >>>>>>>>>>>> [19602.039014] ath9k: Set channel: 2422 MHz
> >>>>>>>>>>>> [19602.039018] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.043759] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0
> >>>>>>>>>>>> [19602.104014] ath9k: Set channel: 2427 MHz
> >>>>>>>>>>>> [19602.104019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.108744] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0
> >>>>>>>>>>>> [19602.169030] ath9k: Set channel: 2432 MHz
> >>>>>>>>>>>> [19602.169040] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.169144] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0
> >>>>>>>>>>>> [19602.230009] ath9k: Set channel: 2437 MHz
> >>>>>>>>>>>> [19602.230012] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.230100] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0
> >>>>>>>>>>>> [19602.291015] ath9k: Set channel: 2442 MHz
> >>>>>>>>>>>> [19602.291019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.291110] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0
> >>>>>>>>>>>> [19602.352012] ath9k: Set channel: 2447 MHz
> >>>>>>>>>>>> [19602.352016] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.352107] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0
> >>>>>>>>>>>> [19602.413008] ath9k: Set channel: 2452 MHz
> >>>>>>>>>>>> [19602.413010] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.413097] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0
> >>>>>>>>>>>> [19602.474007] ath9k: Set channel: 2457 MHz
> >>>>>>>>>>>> [19602.474009] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.474519] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0
> >>>>>>>>>>>> [19602.535014] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19602.535019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.535115] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0
> >>>>>>>>>>>> [19602.596014] ath9k: Set channel: 2467 MHz
> >>>>>>>>>>>> [19602.596019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.596115] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0
> >>>>>>>>>>>> [19602.797021] ath9k: Set channel: 2472 MHz
> >>>>>>>>>>>> [19602.797032] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.797136] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0
> >>>>>>>>>>>> [19602.998018] ath9k: Set channel: 2484 MHz
> >>>>>>>>>>>> [19602.998025] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.998124] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0
> >>>>>>>>>>>> [19603.199023] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19603.199031] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19603.199198] ath9k: (2484 MHz) -> (2462 MHz), chanwidth: 0
> >>>>>>>>>>>> [19603.200703] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19603.200723] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19603.200728] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19603.200893] ath9k: (2462 MHz) -> (2462 MHz), chanwidth: 0
> >>>>>>>>>>>> [19603.205188] ath9k: Configure tx [queue/halq] [0/3], aifs:
> 2, cw_min:
> >>>>>>>>>>>> 3, cw_max: 7, txop: 47
> >>>>>>>>>>>> [19603.205203] ath9k: Configure tx [queue/halq] [1/2], aifs:
> 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 94
> >>>>>>>>>>>> [19603.205213] ath9k: Configure tx [queue/halq] [2/1], aifs:
> 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.205224] ath9k: Configure tx [queue/halq] [3/0], aifs:
> 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.205364] wlan0: authenticate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19603.208182] wlan0: authenticated
> >>>>>>>>>>>> [19603.208189] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19603.216915] wlan0: RX AssocResp from 00:1e:58:b4:f6:83
> (capab=0x421
> >>>>>>>>>>>> status=0 aid=1)
> >>>>>>>>>>>> [19603.216920] wlan0: associated
> >>>>>>>>>>>> [19603.216952] ath9k: Choosing rate table for mode: 10
> >>>>>>>>>>>> [19603.217411] ath9k: RC Initialized with capabilities: 0x0
> >>>>>>>>>>>> [19603.217420] ath9k: Configure tx [queue/halq] [0/3], aifs:
> 2, cw_min:
> >>>>>>>>>>>> 3, cw_max: 7, txop: 47
> >>>>>>>>>>>> [19603.217437] ath9k: Configure tx [queue/halq] [1/2], aifs:
> 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 94
> >>>>>>>>>>>> [19603.217451] ath9k: Configure tx [queue/halq] [2/1], aifs:
> 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.217466] ath9k: Configure tx [queue/halq] [3/0], aifs:
> 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.217536] ath9k: RX filter 0x0 bssid 00:1e:58:b4:f6:83
> aid 0x0
> >>>>>>>>>>>> [19603.217541] ath9k: BSS Changed PREAMBLE 1
> >>>>>>>>>>>> [19603.217546] ath9k: BSS Changed ASSOC 1
> >>>>>>>>>>>> [19603.217550] ath9k: Bss Info ASSOC 1, bssid:
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19603.218918] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes
> ready
> >>>>>>>>>>>> [19603.218977] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> I am off to bed, i live in GMT0(+1) time zone
> >>>>>>>>>>>> Hopefully see ya tomorrow.
> >>>>>>>>>>>> Is there an IRC channel or anything? this is just slow.
> >>>>>>>>>>>> Regards
> >>>>>>>>>>>> Dmitri
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>> Hello Luis.
> >>>>>>>>>>>
> >>>>>>>>>>> I don't mean to rush you, was only wandering, what is story
> with report
> >>>>>>>>>>> i have submitted, any progress on it yet?
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>> So I am working on other items and was hoping someone else could
> tackle this
> >>>>>>>>>> but it seems everyone has been busy with other items as well.
> I'll try to help
> >>>>>>>>>> you with this but I'm as in the dark with this issue as you are
> right now. We'll
> >>>>>>>>>> need to debug futher.
> >>>>>>>>>>
> >>>>>>>>>> Did you see the other thread about a similar issue? It seemed
> the person was
> >>>>>>>>>> running Network Manager (and that spawns it own wpa_supplicant).
> >>>>>>>>>>
> >>>>>>>>>> Just to confirm -- are you certain you don't have any instance
> of nm-applet,
> >>>>>>>>>> NetworkManager or a wpa_supplicant running in the background?
> >>>>>>>>>>
> >>>>>>>>>> Luis
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>> Hello Luis.
> >>>>>>>>>
> >>>>>>>>> I have no idea what is nm-applet. I am as close to bare bones as
> >>>>>>>>> possible. I am using gentoo distribution, it by design is not
> using any
> >>>>>>>>> graphical interfaces. to set up network, you have to set it up
> initially
> >>>>>>>>> manually(using available comands or text editor), it doesn't even
> have
> >>>>>>>>> DHCP client by default!
> >>>>>>>>> typically if what you have mentioned is part of start up scripts
> - i
> >>>>>>>>> would know about it.(since most of them if not installed by
> default -
> >>>>>>>>> are not starting up by default)
> >>>>>>>>>
> >>>>>>>>> emerge -s nm-applet
> >>>>>>>>> Searching...
> >>>>>>>>> [ Results for search key : nm-applet ]
> >>>>>>>>> [ Applications found : 1 ]
> >>>>>>>>>
> >>>>>>>>> * gnome-extra/nm-applet
> >>>>>>>>> Latest version available: 0.6.6
> >>>>>>>>> Latest version installed: [ Not Installed ]
> >>>>>>>>>
> >>>>>>>>> I am not sure what is "wpa_supplicant", since from what i
> understand
> >>>>>>>>> it's not user land executable.
> >>>>>>>>>
> >>>>>>>>> rc-status
> >>>>>>>>> Runlevel: default
> >>>>>>>>> acpid
> >>>>>>>>> [ started ]
> >>>>>>>>> alsasound
> >>>>>>>>> [ started ]
> >>>>>>>>> clamd
> >>>>>>>>> [ started ]
> >>>>>>>>> hald
> >>>>>>>>> [ started ]
> >>>>>>>>> hdparm
> >>>>>>>>> [ started ]
> >>>>>>>>> lm_sensors
> >>>>>>>>> [ started ]
> >>>>>>>>> local
> >>>>>>>>> [ started ]
> >>>>>>>>> netmount
> >>>>>>>>> [ started ]
> >>>>>>>>> smartd
> >>>>>>>>> [ started ]
> >>>>>>>>> syslog-ng
> >>>>>>>>> [ started ]
> >>>>>>>>>
> >>>>>>>>> All my network settings are done explicitly by hands or with use
> of
> >>>>>>>>> command line dhcp client. There is only one automated network
> script.,
> >>>>>>>>> which runs dhcp client on any available ethernet interface, which
> is my
> >>>>>>>>> eth0 card.
> >>>>>>>>>
> >>>>>>>>> emerge -s wpa_supplicant
> >>>>>>>>> Searching...
> >>>>>>>>> [ Results for search key : wpa_supplicant ]
> >>>>>>>>> [ Applications found : 1 ]
> >>>>>>>>>
> >>>>>>>>> * net-wireless/wpa_supplicant
> >>>>>>>>> Latest version available: 0.6.4
> >>>>>>>>> Latest version installed: [ Not Installed ]
> >>>>>>>>> Size of files: 972 kB
> >>>>>>>>> Homepage: http://hostap.epitest.fi/wpa_supplicant/
> >>>>>>>>> Description: IEEE 802.1X/WPA supplicant for secure
> wireless
> >>>>>>>>> transfers
> >>>>>>>>> License: || ( GPL-2 BSD )
> >>>>>>>>>
> >>>>>>>>> No gnome networking software is installed, at least not running
> for sure.
> >>>>>>>>> i can send you output of pstree if you like,
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>> Yes, send that please. wpa_supplicant is a userspace application,
> used for
> >>>>>>>> connecting to WPA / WPA2 networks. It also is also responsible for
> roaming
> >>>>>>>> for us in Linux. Network Manager uses it on the GNOME / KDE
> desktop, and the
> >>>>>>>> applet on the top right hand side of the desktop that lets you
> select which
> >>>>>>>> wireless network to connect to is the "nm-applet".
> >>>>>>>>
> >>>>>>>> Luis
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>> Sure, if you look carefully into emerge outputs i have send
> previously -
> >>>>>>> you will see, that none of those packages are actually installed!
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>> Hello Luis.
> >>>>>>
> >>>>>> Just wondering is there any update on the problem? Is there anything
> I
> >>>>>> can do to help identify problem?
> >>>>>>
> >>>>>>
> >>>>>>
> >>>> Dmitri, can you provide a tcmpdump (pcap) capture of this?
> >>>>
> >>>> Luis
> >>>>
> >>>>
> >>>>
> >>> Hello Luis,
> >>> I assume you have misspelled, (i am not familiar with tcmpdump anyway).
> >>> Please see attachment for step by step log.
> >>> Let me know what you want me to do next.
> >>> Regards
> >>>
> >>>
> >> Do you still want me to submit something to kernel.org?
> >>
> >
> > Hm, nah, someone will follow up with you soon, if not just
> > reply to the thread (not me).
> >
> > Luis
> >
> Hi guys, any news?
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20090725/beecf324/attachment-0001.htm
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-07-25 17:37 ` Senthilkumar Balasubramanian
@ 2009-07-25 18:54 ` Dmitri Seletski
2009-07-27 20:04 ` Dmitri Seletski
2009-08-05 3:43 ` Dmitri Seletski
2 siblings, 0 replies; 39+ messages in thread
From: Dmitri Seletski @ 2009-07-25 18:54 UTC (permalink / raw)
To: ath9k-devel
Senthilkumar Balasubramanian wrote:
> Dmirtri
>
> Sorry! for the delayed reply from our side. We have submitted critical
> bug fixes in the recent times and most of them were merged into
> wireless-testing only recently. I assume you are using a PCI 11n Card
> (not a PCI-E card). Also If i have understood the thread correctly,
> bgn mode shows very low throughput and N mode doesn't connect at all.
>
> Please try the latest wireless-testing and in the mean while, let me
> work on some instrumentation code for you.
>
> Also if possible, please provide us the wireshark packet capture. You
> have to run the following command to create a monitor mode interface
> and capture the frames on "moni0" interface using wireshark when the
> problem happens. Please capture for both bgn and n only modes.
> iw phy phy0 interface add moni0 type monitor
> Please refer to for more information on how to add a monitor mode
> interface using which you can capture wireless frames in wireshark tool.
> http://linuxwireless.org/en/users/Documentation/iw
>
> Thanks
> Senthil
>
> On Sat, Jul 25, 2009 at 6:19 AM, Dmitri Seletski <drjoms@gmail.com
> <mailto:drjoms@gmail.com>> wrote:
>
> Luis R. Rodriguez wrote:
> > On Mon, Jun 15, 2009 at 03:49:29PM -0700, Dmitri Seletski wrote:
> >
> >> Dmitri Seletski wrote:
> >>
> >>> Luis R. Rodriguez wrote:
> >>>
> >>>
> >>>> On Mon, Jun 15, 2009 at 09:01:44AM -0700, Luis Rodriguez wrote:
> >>>>
> >>>>
> >>>>
> >>>>> On Sat, Jun 13, 2009 at 05:35:24PM -0700, Dmitri Seletski wrote:
> >>>>>
> >>>>>
> >>>>>
> >>>>>> Dmitri Seletski wrote:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>> On Tue, Jun 09, 2009 at 02:59:23PM -0700, Dmitri Seletski
> wrote:
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>> On Tue, Jun 09, 2009 at 08:56:01AM -0700, Dmitri
> Seletski wrote:
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>> Dmitri Seletski wrote:
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>> On Mon, May 18, 2009 at 4:59 PM, Luis R. Rodriguez
> >>>>>>>>>>>>> <lrodriguez@atheros.com
> <mailto:lrodriguez@atheros.com>> wrote:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>> On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri
> Seletski wrote:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski
> <drjoms at gmail.com <mailto:drjoms@gmail.com>> wrote:
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> compat-wireless-2009-05-19 # grep
> CONFIG_MAC80211_DEFAULT_PS config.mk <http://config.mk>
> >>>>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS=n
> >>>>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> make :)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> make unload
> >>>>>>>>>>>>>>>>> make install
> >>>>>>>>>>>>>>>>> modprobe ath9k
> >>>>>>>>>>>>>>>>> ip link set wlan0 up
> >>>>>>>>>>>>>>>>> iwconfig wlan0 essid dlink
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> last (IMHO)relevan't dmesg messages(got loads of
> dmesg history today)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2
> AR2133 RF Rev:81:
> >>>>>>>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> >>>>>>>>>>>>>>>>> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link
> is not ready
> >>>>>>>>>>>>>>>>> [14216.110829] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 1
> >>>>>>>>>>>>>>>>> [14216.310267] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 2
> >>>>>>>>>>>>>>>>> [14216.316846] wlan0 direct probe responded
> >>>>>>>>>>>>>>>>> [14216.316848] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14216.320962] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14216.320964] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14216.520277] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14216.527099] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> I believe reason 9 is you're AP tells you that
> you are trying to
> >>>>>>>>>>>>>>>> associate to it without first having authenticated.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14217.527273] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 3
> >>>>>>>>>>>>>>>>> [14217.727264] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>>>>>> [14231.356054] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14231.359188] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14231.359191] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14231.367102] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> And we repeat this here.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14232.367277] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 1
> >>>>>>>>>>>>>>>>> [14232.567284] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 2
> >>>>>>>>>>>>>>>>> [14232.570837] wlan0 direct probe responded
> >>>>>>>>>>>>>>>>> [14232.570843] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14232.573250] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14232.573434] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14232.773283] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14232.780130] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> And here.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14233.780276] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 3
> >>>>>>>>>>>>>>>>> [14233.784639] wlan0 direct probe responded
> >>>>>>>>>>>>>>>>> [14233.784645] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14233.799082] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> Access point in N mode only currently.
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Hm OK.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> Switching to mixture of N, G, B and dmesg throws
> this:
> >>>>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>>>>>> [14435.358964] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14435.362920] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14435.362922] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14435.371750] wlan0: RX AssocResp from
> 00:1e:58:b4:f6:83 (capab=0x421
> >>>>>>>>>>>>>>>>> status=0 aid=1)
> >>>>>>>>>>>>>>>>> [14435.371752] wlan0: associated
> >>>>>>>>>>>>>>>>> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0:
> link becomes ready
> >>>>>>>>>>>>>>>>> [14435.839637] wlan0: disassociated (Reason: 8)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> This is the STA has left. Hm, lets try upgrading
> your supplicant...
> >>>>>>>>>>>>>>>> Can you try upgrading to the latest from git?
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> git://w1.fi/srv/git/hostap.git
> <http://w1.fi/srv/git/hostap.git>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Luis
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Hello Luis.
> >>>>>>>>>>>>>>> I have no idea what authentication you are talking
> about.
> >>>>>>>>>>>>>>> I am sure that i dont use any authentication.
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>> I'm talking about the 802.11 authentication which
> is always
> >>>>>>>>>>>>>> required prior to association (even when no
> encryption is enabled).
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Can you try a newer wpa_supplicant to see if that
> helps?
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>> That is, use a plaintext supplicant as follows:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> mcgrof at tesla ~ $ cat plaintext.conf
> >>>>>>>>>>>>> ctrl_interface=/var/run/wpa_supplicant
> >>>>>>>>>>>>> ap_scan=1
> >>>>>>>>>>>>> network={
> >>>>>>>>>>>>> key_mgmt=NONE
> >>>>>>>>>>>>> ssid="your-ssid"
> >>>>>>>>>>>>> scan_ssid=1
> >>>>>>>>>>>>> }
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> wpa_supplicant -i wlan0 -c plaintext.conf
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Luis
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>> Hello Luis.
> >>>>>>>>>>>>
> >>>>>>>>>>>> ou man, you scared shi* out of me :)
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> dimko wpa_supplicant # modprobe -r ath9k
> >>>>>>>>>>>> dimko wpa_supplicant # modprobe ath9k debug=0x00000200
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> [19251.514273] wlan0: deauthenticating by local
> choice (reason=3)
> >>>>>>>>>>>> [19251.808278] ath9k 0000:01:07.0: PCI INT A disabled
> >>>>>>>>>>>> [19251.808327] ath9k: Driver unloaded
> >>>>>>>>>>>> [19288.173497] cfg80211: Calling CRDA to update world
> regulatory domain
> >>>>>>>>>>>> [19288.277348] ath9k 0000:01:07.0: PCI INT A ->
> Link[LNKB] -> GSI 19
> >>>>>>>>>>>> (level, low) -> IRQ 19
> >>>>>>>>>>>> [19288.703537] ath9k: Eeprom VER: 14, REV: 2
> >>>>>>>>>>>> [19288.704291] ath: Country alpha2 being used: AM
> >>>>>>>>>>>> [19288.704292] ath: Regpair detected: 0x30
> >>>>>>>>>>>> [19288.704294] ath9k: Rate: 1Mbps, ratecode: 27
> >>>>>>>>>>>> [19288.704295] ath9k: Rate: 2Mbps, ratecode: 26
> >>>>>>>>>>>> [19288.704297] ath9k: Rate: 5Mbps, ratecode: 25
> >>>>>>>>>>>> [19288.704298] ath9k: Rate: 11Mbps, ratecode: 24
> >>>>>>>>>>>> [19288.704299] ath9k: Rate: 6Mbps, ratecode: 11
> >>>>>>>>>>>> [19288.704300] ath9k: Rate: 9Mbps, ratecode: 15
> >>>>>>>>>>>> [19288.704302] ath9k: Rate: 12Mbps, ratecode: 10
> >>>>>>>>>>>> [19288.704303] ath9k: Rate: 18Mbps, ratecode: 14
> >>>>>>>>>>>> [19288.704304] ath9k: Rate: 24Mbps, ratecode: 9
> >>>>>>>>>>>> [19288.704305] ath9k: Rate: 36Mbps, ratecode: 13
> >>>>>>>>>>>> [19288.704306] ath9k: Rate: 48Mbps, ratecode: 8
> >>>>>>>>>>>> [19288.704307] ath9k: Rate: 54Mbps, ratecode: 12
> >>>>>>>>>>>> [19288.704309] ath9k: Rate: 6Mbps, ratecode: 11
> >>>>>>>>>>>> [19288.704310] ath9k: Rate: 9Mbps, ratecode: 15
> >>>>>>>>>>>> [19288.704311] ath9k: Rate: 12Mbps, ratecode: 10
> >>>>>>>>>>>> [19288.704312] ath9k: Rate: 18Mbps, ratecode: 14
> >>>>>>>>>>>> [19288.704313] ath9k: Rate: 24Mbps, ratecode: 9
> >>>>>>>>>>>> [19288.704315] ath9k: Rate: 36Mbps, ratecode: 13
> >>>>>>>>>>>> [19288.704316] ath9k: Rate: 48Mbps, ratecode: 8
> >>>>>>>>>>>> [19288.704317] ath9k: Rate: 54Mbps, ratecode: 12
> >>>>>>>>>>>> [19288.704339] ath9k: tx DMA: 512 buffers 1 desc/buf
> >>>>>>>>>>>> [19288.704379] ath9k: tx DMA map: ffff88009f400000
> (77824) -> 0 (77824)
> >>>>>>>>>>>> [19288.704406] ath9k: beacon DMA: 4 buffers 1 desc/buf
> >>>>>>>>>>>> [19288.704408] ath9k: beacon DMA map:
> ffff88009f577000 (608) -> 0 (608)
> >>>>>>>>>>>> [19288.704410] ath9k: cachelsz 64 rxbufsize 3904
> >>>>>>>>>>>> [19288.704412] ath9k: rx DMA: 512 buffers 1 desc/buf
> >>>>>>>>>>>> [19288.704455] ath9k: rx DMA map: ffff8800ac560000
> (77824) -> 0 (77824)
> >>>>>>>>>>>> [19288.707111] phy0: Selected rate control algorithm
> 'ath9k_rate_control'
> >>>>>>>>>>>> [19288.707656] cfg80211: Calling CRDA for country: AM
> >>>>>>>>>>>> [19288.707680] Registered led device: ath9k-phy0::radio
> >>>>>>>>>>>> [19288.707689] Registered led device: ath9k-phy0::assoc
> >>>>>>>>>>>> [19288.707699] Registered led device: ath9k-phy0::tx
> >>>>>>>>>>>> [19288.707711] Registered led device: ath9k-phy0::rx
> >>>>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2
> AR2133 RF Rev:81:
> >>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> ip link set wlan0 up
> >>>>>>>>>>>>
> >>>>>>>>>>>> [19365.389282] ath9k: Starting driver with initial
> channel: 2412 MHz
> >>>>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
> >>>>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
> >>>>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
> >>>>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 102
> >>>>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 15, cw_max: 31, txop: 188
> >>>>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is
> not ready
> >>>>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>>
> >>>>>>>>>>>> iwconfig wlan0 essid dlink
> >>>>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2
> AR2133 RF Rev:81:
> >>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> >>>>>>>>>>>> [19365.389282] ath9k: Starting driver with initial
> channel: 2412 MHz
> >>>>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
> >>>>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
> >>>>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
> >>>>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 102
> >>>>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 15, cw_max: 31, txop: 188
> >>>>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is
> not ready
> >>>>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19457.759393] ath9k: Set HW RX filter: 0x10
> >>>>>>>>>>>> [19457.789264] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19457.789270] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.789373] ath9k: (2412 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19457.853264] ath9k: Set channel: 2417 MHz
> >>>>>>>>>>>> [19457.853269] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.853363] ath9k: (2412 MHz) -> (2417 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19457.914263] ath9k: Set channel: 2422 MHz
> >>>>>>>>>>>> [19457.914268] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.918980] ath9k: (2417 MHz) -> (2422 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19457.980263] ath9k: Set channel: 2427 MHz
> >>>>>>>>>>>> [19457.980268] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.980363] ath9k: (2422 MHz) -> (2427 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.041263] ath9k: Set channel: 2432 MHz
> >>>>>>>>>>>> [19458.041268] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.041363] ath9k: (2427 MHz) -> (2432 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.102264] ath9k: Set channel: 2437 MHz
> >>>>>>>>>>>> [19458.102271] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.102368] ath9k: (2432 MHz) -> (2437 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.163262] ath9k: Set channel: 2442 MHz
> >>>>>>>>>>>> [19458.163267] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.163360] ath9k: (2437 MHz) -> (2442 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.235263] ath9k: Set channel: 2447 MHz
> >>>>>>>>>>>> [19458.235269] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.235450] ath9k: (2442 MHz) -> (2447 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.296257] ath9k: Set channel: 2452 MHz
> >>>>>>>>>>>> [19458.296258] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.296344] ath9k: (2447 MHz) -> (2452 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.357257] ath9k: Set channel: 2457 MHz
> >>>>>>>>>>>> [19458.357258] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.357344] ath9k: (2452 MHz) -> (2457 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.418257] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19458.418258] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.418344] ath9k: (2457 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.479263] ath9k: Set channel: 2467 MHz
> >>>>>>>>>>>> [19458.479267] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.479362] ath9k: (2462 MHz) -> (2467 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.680270] ath9k: Set channel: 2472 MHz
> >>>>>>>>>>>> [19458.680280] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.680381] ath9k: (2467 MHz) -> (2472 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.881265] ath9k: Set channel: 2484 MHz
> >>>>>>>>>>>> [19458.881270] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.881367] ath9k: (2472 MHz) -> (2484 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19459.082271] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19459.082278] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19459.082452] ath9k: (2484 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19459.084497] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19459.085175] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19459.091031] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19459.091252] ath9k: (2412 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19459.095097] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 3, cw_max: 7, txop: 47
> >>>>>>>>>>>> [19459.095114] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 94
> >>>>>>>>>>>> [19459.095125] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19459.095136] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19459.095272] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19459.099880] wlan0: authenticated
> >>>>>>>>>>>> [19459.099885] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19459.299265] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19459.306086] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>> [19460.306269] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 1
> >>>>>>>>>>>> [19460.316796] wlan0 direct probe responded
> >>>>>>>>>>>> [19460.316801] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19460.319702] wlan0: authenticated
> >>>>>>>>>>>> [19460.319707] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19460.519264] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> this is while ap is in N mode.
> >>>>>>>>>>>>
> >>>>>>>>>>>> This is after i set it mixed NBG:
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> [19460.519264] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>> [19601.885667] ath9k: Set HW RX filter: 0x10
> >>>>>>>>>>>> [19601.917026] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19601.917034] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19601.917192] ath9k: (2462 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19601.978014] ath9k: Set channel: 2417 MHz
> >>>>>>>>>>>> [19601.978019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19601.978114] ath9k: (2412 MHz) -> (2417 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.039014] ath9k: Set channel: 2422 MHz
> >>>>>>>>>>>> [19602.039018] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.043759] ath9k: (2417 MHz) -> (2422 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.104014] ath9k: Set channel: 2427 MHz
> >>>>>>>>>>>> [19602.104019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.108744] ath9k: (2422 MHz) -> (2427 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.169030] ath9k: Set channel: 2432 MHz
> >>>>>>>>>>>> [19602.169040] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.169144] ath9k: (2427 MHz) -> (2432 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.230009] ath9k: Set channel: 2437 MHz
> >>>>>>>>>>>> [19602.230012] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.230100] ath9k: (2432 MHz) -> (2437 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.291015] ath9k: Set channel: 2442 MHz
> >>>>>>>>>>>> [19602.291019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.291110] ath9k: (2437 MHz) -> (2442 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.352012] ath9k: Set channel: 2447 MHz
> >>>>>>>>>>>> [19602.352016] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.352107] ath9k: (2442 MHz) -> (2447 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.413008] ath9k: Set channel: 2452 MHz
> >>>>>>>>>>>> [19602.413010] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.413097] ath9k: (2447 MHz) -> (2452 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.474007] ath9k: Set channel: 2457 MHz
> >>>>>>>>>>>> [19602.474009] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.474519] ath9k: (2452 MHz) -> (2457 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.535014] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19602.535019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.535115] ath9k: (2457 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.596014] ath9k: Set channel: 2467 MHz
> >>>>>>>>>>>> [19602.596019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.596115] ath9k: (2462 MHz) -> (2467 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.797021] ath9k: Set channel: 2472 MHz
> >>>>>>>>>>>> [19602.797032] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.797136] ath9k: (2467 MHz) -> (2472 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.998018] ath9k: Set channel: 2484 MHz
> >>>>>>>>>>>> [19602.998025] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.998124] ath9k: (2472 MHz) -> (2484 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19603.199023] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19603.199031] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19603.199198] ath9k: (2484 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19603.200703] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19603.200723] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19603.200728] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19603.200893] ath9k: (2462 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19603.205188] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 3, cw_max: 7, txop: 47
> >>>>>>>>>>>> [19603.205203] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 94
> >>>>>>>>>>>> [19603.205213] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.205224] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.205364] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19603.208182] wlan0: authenticated
> >>>>>>>>>>>> [19603.208189] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19603.216915] wlan0: RX AssocResp from
> 00:1e:58:b4:f6:83 (capab=0x421
> >>>>>>>>>>>> status=0 aid=1)
> >>>>>>>>>>>> [19603.216920] wlan0: associated
> >>>>>>>>>>>> [19603.216952] ath9k: Choosing rate table for mode: 10
> >>>>>>>>>>>> [19603.217411] ath9k: RC Initialized with
> capabilities: 0x0
> >>>>>>>>>>>> [19603.217420] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 3, cw_max: 7, txop: 47
> >>>>>>>>>>>> [19603.217437] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 94
> >>>>>>>>>>>> [19603.217451] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.217466] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.217536] ath9k: RX filter 0x0 bssid
> 00:1e:58:b4:f6:83 aid 0x0
> >>>>>>>>>>>> [19603.217541] ath9k: BSS Changed PREAMBLE 1
> >>>>>>>>>>>> [19603.217546] ath9k: BSS Changed ASSOC 1
> >>>>>>>>>>>> [19603.217550] ath9k: Bss Info ASSOC 1, bssid:
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19603.218918] ADDRCONF(NETDEV_CHANGE): wlan0: link
> becomes ready
> >>>>>>>>>>>> [19603.218977] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> I am off to bed, i live in GMT0(+1) time zone
> >>>>>>>>>>>> Hopefully see ya tomorrow.
> >>>>>>>>>>>> Is there an IRC channel or anything? this is just slow.
> >>>>>>>>>>>> Regards
> >>>>>>>>>>>> Dmitri
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>> Hello Luis.
> >>>>>>>>>>>
> >>>>>>>>>>> I don't mean to rush you, was only wandering, what is
> story with report
> >>>>>>>>>>> i have submitted, any progress on it yet?
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>> So I am working on other items and was hoping someone
> else could tackle this
> >>>>>>>>>> but it seems everyone has been busy with other items as
> well. I'll try to help
> >>>>>>>>>> you with this but I'm as in the dark with this issue as
> you are right now. We'll
> >>>>>>>>>> need to debug futher.
> >>>>>>>>>>
> >>>>>>>>>> Did you see the other thread about a similar issue? It
> seemed the person was
> >>>>>>>>>> running Network Manager (and that spawns it own
> wpa_supplicant).
> >>>>>>>>>>
> >>>>>>>>>> Just to confirm -- are you certain you don't have any
> instance of nm-applet,
> >>>>>>>>>> NetworkManager or a wpa_supplicant running in the
> background?
> >>>>>>>>>>
> >>>>>>>>>> Luis
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>> Hello Luis.
> >>>>>>>>>
> >>>>>>>>> I have no idea what is nm-applet. I am as close to bare
> bones as
> >>>>>>>>> possible. I am using gentoo distribution, it by design
> is not using any
> >>>>>>>>> graphical interfaces. to set up network, you have to set
> it up initially
> >>>>>>>>> manually(using available comands or text editor), it
> doesn't even have
> >>>>>>>>> DHCP client by default!
> >>>>>>>>> typically if what you have mentioned is part of start up
> scripts - i
> >>>>>>>>> would know about it.(since most of them if not installed
> by default -
> >>>>>>>>> are not starting up by default)
> >>>>>>>>>
> >>>>>>>>> emerge -s nm-applet
> >>>>>>>>> Searching...
> >>>>>>>>> [ Results for search key : nm-applet ]
> >>>>>>>>> [ Applications found : 1 ]
> >>>>>>>>>
> >>>>>>>>> * gnome-extra/nm-applet
> >>>>>>>>> Latest version available: 0.6.6
> >>>>>>>>> Latest version installed: [ Not Installed ]
> >>>>>>>>>
> >>>>>>>>> I am not sure what is "wpa_supplicant", since from what
> i understand
> >>>>>>>>> it's not user land executable.
> >>>>>>>>>
> >>>>>>>>> rc-status
> >>>>>>>>> Runlevel: default
> >>>>>>>>> acpid
> >>>>>>>>> [ started ]
> >>>>>>>>> alsasound
> >>>>>>>>> [ started ]
> >>>>>>>>> clamd
> >>>>>>>>> [ started ]
> >>>>>>>>> hald
> >>>>>>>>> [ started ]
> >>>>>>>>> hdparm
> >>>>>>>>> [ started ]
> >>>>>>>>> lm_sensors
> >>>>>>>>> [ started ]
> >>>>>>>>> local
> >>>>>>>>> [ started ]
> >>>>>>>>> netmount
> >>>>>>>>> [ started ]
> >>>>>>>>> smartd
> >>>>>>>>> [ started ]
> >>>>>>>>> syslog-ng
> >>>>>>>>> [ started ]
> >>>>>>>>>
> >>>>>>>>> All my network settings are done explicitly by hands or
> with use of
> >>>>>>>>> command line dhcp client. There is only one automated
> network script.,
> >>>>>>>>> which runs dhcp client on any available ethernet
> interface, which is my
> >>>>>>>>> eth0 card.
> >>>>>>>>>
> >>>>>>>>> emerge -s wpa_supplicant
> >>>>>>>>> Searching...
> >>>>>>>>> [ Results for search key : wpa_supplicant ]
> >>>>>>>>> [ Applications found : 1 ]
> >>>>>>>>>
> >>>>>>>>> * net-wireless/wpa_supplicant
> >>>>>>>>> Latest version available: 0.6.4
> >>>>>>>>> Latest version installed: [ Not Installed ]
> >>>>>>>>> Size of files: 972 kB
> >>>>>>>>> Homepage:
> http://hostap.epitest.fi/wpa_supplicant/
> >>>>>>>>> Description: IEEE 802.1X/WPA supplicant for
> secure wireless
> >>>>>>>>> transfers
> >>>>>>>>> License: || ( GPL-2 BSD )
> >>>>>>>>>
> >>>>>>>>> No gnome networking software is installed, at least not
> running for sure.
> >>>>>>>>> i can send you output of pstree if you like,
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>> Yes, send that please. wpa_supplicant is a userspace
> application, used for
> >>>>>>>> connecting to WPA / WPA2 networks. It also is also
> responsible for roaming
> >>>>>>>> for us in Linux. Network Manager uses it on the GNOME /
> KDE desktop, and the
> >>>>>>>> applet on the top right hand side of the desktop that
> lets you select which
> >>>>>>>> wireless network to connect to is the "nm-applet".
> >>>>>>>>
> >>>>>>>> Luis
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>> Sure, if you look carefully into emerge outputs i have
> send previously -
> >>>>>>> you will see, that none of those packages are actually
> installed!
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>> Hello Luis.
> >>>>>>
> >>>>>> Just wondering is there any update on the problem? Is there
> anything I
> >>>>>> can do to help identify problem?
> >>>>>>
> >>>>>>
> >>>>>>
> >>>> Dmitri, can you provide a tcmpdump (pcap) capture of this?
> >>>>
> >>>> Luis
> >>>>
> >>>>
> >>>>
> >>> Hello Luis,
> >>> I assume you have misspelled, (i am not familiar with tcmpdump
> anyway).
> >>> Please see attachment for step by step log.
> >>> Let me know what you want me to do next.
> >>> Regards
> >>>
> >>>
> >> Do you still want me to submit something to kernel.org
> <http://kernel.org>?
> >>
> >
> > Hm, nah, someone will follow up with you soon, if not just
> > reply to the thread (not me).
> >
> > Luis
> >
> Hi guys, any news?
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org <mailto:ath9k-devel@lists.ath9k.org>
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
>
Downloaded fresh version of compat wireless.
It fails to "make".
See make.txt attachment.
Regards
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: make.txt
Url: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20090725/a74a2676/attachment-0001.txt
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-07-25 17:37 ` Senthilkumar Balasubramanian
2009-07-25 18:54 ` Dmitri Seletski
@ 2009-07-27 20:04 ` Dmitri Seletski
2009-08-05 3:43 ` Dmitri Seletski
2 siblings, 0 replies; 39+ messages in thread
From: Dmitri Seletski @ 2009-07-27 20:04 UTC (permalink / raw)
To: ath9k-devel
Hello Senthilkumar.
I have tried todays archive, no luck again.
While, for example "compat-wireless-2009-04-10" compiles just fine, when
i try to compile "compat-wireless-2009-07-27" or
"compat-wireless-2009-07-24" i get errors.
I do something like:
make clean
make[1]: Entering directory `/usr/src/linux-2.6.30'
CLEAN /home/dimko/compat-wireless-2009-07-27
CLEAN /home/dimko/compat-wireless-2009-07-27/.tmp_versions
make[1]: Leaving directory `/usr/src/linux-2.6.30'
(Than)
make > make.txt 2>&1
Please see attachment, for full details.
It for "compat-wireless-2009-07-24"
Thanks
Senthilkumar Balasubramanian wrote:
> Dmirtri
>
> Sorry! for the delayed reply from our side. We have submitted critical
> bug fixes in the recent times and most of them were merged into
> wireless-testing only recently. I assume you are using a PCI 11n Card
> (not a PCI-E card). Also If i have understood the thread correctly,
> bgn mode shows very low throughput and N mode doesn't connect at all.
>
> Please try the latest wireless-testing and in the mean while, let me
> work on some instrumentation code for you.
>
> Also if possible, please provide us the wireshark packet capture. You
> have to run the following command to create a monitor mode interface
> and capture the frames on "moni0" interface using wireshark when the
> problem happens. Please capture for both bgn and n only modes.
> iw phy phy0 interface add moni0 type monitor
> Please refer to for more information on how to add a monitor mode
> interface using which you can capture wireless frames in wireshark tool.
> http://linuxwireless.org/en/users/Documentation/iw
>
> Thanks
> Senthil
>
> On Sat, Jul 25, 2009 at 6:19 AM, Dmitri Seletski <drjoms@gmail.com
> <mailto:drjoms@gmail.com>> wrote:
>
> Luis R. Rodriguez wrote:
> > On Mon, Jun 15, 2009 at 03:49:29PM -0700, Dmitri Seletski wrote:
> >
> >> Dmitri Seletski wrote:
> >>
> >>> Luis R. Rodriguez wrote:
> >>>
> >>>
> >>>> On Mon, Jun 15, 2009 at 09:01:44AM -0700, Luis Rodriguez wrote:
> >>>>
> >>>>
> >>>>
> >>>>> On Sat, Jun 13, 2009 at 05:35:24PM -0700, Dmitri Seletski wrote:
> >>>>>
> >>>>>
> >>>>>
> >>>>>> Dmitri Seletski wrote:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>> On Tue, Jun 09, 2009 at 02:59:23PM -0700, Dmitri Seletski
> wrote:
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>> On Tue, Jun 09, 2009 at 08:56:01AM -0700, Dmitri
> Seletski wrote:
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>> Dmitri Seletski wrote:
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>> On Mon, May 18, 2009 at 4:59 PM, Luis R. Rodriguez
> >>>>>>>>>>>>> <lrodriguez@atheros.com
> <mailto:lrodriguez@atheros.com>> wrote:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>> On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri
> Seletski wrote:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski
> <drjoms at gmail.com <mailto:drjoms@gmail.com>> wrote:
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> compat-wireless-2009-05-19 # grep
> CONFIG_MAC80211_DEFAULT_PS config.mk <http://config.mk>
> >>>>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS=n
> >>>>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> make :)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> make unload
> >>>>>>>>>>>>>>>>> make install
> >>>>>>>>>>>>>>>>> modprobe ath9k
> >>>>>>>>>>>>>>>>> ip link set wlan0 up
> >>>>>>>>>>>>>>>>> iwconfig wlan0 essid dlink
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> last (IMHO)relevan't dmesg messages(got loads of
> dmesg history today)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2
> AR2133 RF Rev:81:
> >>>>>>>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> >>>>>>>>>>>>>>>>> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link
> is not ready
> >>>>>>>>>>>>>>>>> [14216.110829] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 1
> >>>>>>>>>>>>>>>>> [14216.310267] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 2
> >>>>>>>>>>>>>>>>> [14216.316846] wlan0 direct probe responded
> >>>>>>>>>>>>>>>>> [14216.316848] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14216.320962] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14216.320964] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14216.520277] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14216.527099] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> I believe reason 9 is you're AP tells you that
> you are trying to
> >>>>>>>>>>>>>>>> associate to it without first having authenticated.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14217.527273] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 3
> >>>>>>>>>>>>>>>>> [14217.727264] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>>>>>> [14231.356054] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14231.359188] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14231.359191] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14231.367102] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> And we repeat this here.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14232.367277] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 1
> >>>>>>>>>>>>>>>>> [14232.567284] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 2
> >>>>>>>>>>>>>>>>> [14232.570837] wlan0 direct probe responded
> >>>>>>>>>>>>>>>>> [14232.570843] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14232.573250] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14232.573434] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14232.773283] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14232.780130] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> And here.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14233.780276] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 3
> >>>>>>>>>>>>>>>>> [14233.784639] wlan0 direct probe responded
> >>>>>>>>>>>>>>>>> [14233.784645] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14233.799082] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> Access point in N mode only currently.
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Hm OK.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> Switching to mixture of N, G, B and dmesg throws
> this:
> >>>>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>>>>>> [14435.358964] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14435.362920] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14435.362922] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14435.371750] wlan0: RX AssocResp from
> 00:1e:58:b4:f6:83 (capab=0x421
> >>>>>>>>>>>>>>>>> status=0 aid=1)
> >>>>>>>>>>>>>>>>> [14435.371752] wlan0: associated
> >>>>>>>>>>>>>>>>> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0:
> link becomes ready
> >>>>>>>>>>>>>>>>> [14435.839637] wlan0: disassociated (Reason: 8)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> This is the STA has left. Hm, lets try upgrading
> your supplicant...
> >>>>>>>>>>>>>>>> Can you try upgrading to the latest from git?
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> git://w1.fi/srv/git/hostap.git
> <http://w1.fi/srv/git/hostap.git>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Luis
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Hello Luis.
> >>>>>>>>>>>>>>> I have no idea what authentication you are talking
> about.
> >>>>>>>>>>>>>>> I am sure that i dont use any authentication.
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>> I'm talking about the 802.11 authentication which
> is always
> >>>>>>>>>>>>>> required prior to association (even when no
> encryption is enabled).
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Can you try a newer wpa_supplicant to see if that
> helps?
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>> That is, use a plaintext supplicant as follows:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> mcgrof at tesla ~ $ cat plaintext.conf
> >>>>>>>>>>>>> ctrl_interface=/var/run/wpa_supplicant
> >>>>>>>>>>>>> ap_scan=1
> >>>>>>>>>>>>> network={
> >>>>>>>>>>>>> key_mgmt=NONE
> >>>>>>>>>>>>> ssid="your-ssid"
> >>>>>>>>>>>>> scan_ssid=1
> >>>>>>>>>>>>> }
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> wpa_supplicant -i wlan0 -c plaintext.conf
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Luis
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>> Hello Luis.
> >>>>>>>>>>>>
> >>>>>>>>>>>> ou man, you scared shi* out of me :)
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> dimko wpa_supplicant # modprobe -r ath9k
> >>>>>>>>>>>> dimko wpa_supplicant # modprobe ath9k debug=0x00000200
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> [19251.514273] wlan0: deauthenticating by local
> choice (reason=3)
> >>>>>>>>>>>> [19251.808278] ath9k 0000:01:07.0: PCI INT A disabled
> >>>>>>>>>>>> [19251.808327] ath9k: Driver unloaded
> >>>>>>>>>>>> [19288.173497] cfg80211: Calling CRDA to update world
> regulatory domain
> >>>>>>>>>>>> [19288.277348] ath9k 0000:01:07.0: PCI INT A ->
> Link[LNKB] -> GSI 19
> >>>>>>>>>>>> (level, low) -> IRQ 19
> >>>>>>>>>>>> [19288.703537] ath9k: Eeprom VER: 14, REV: 2
> >>>>>>>>>>>> [19288.704291] ath: Country alpha2 being used: AM
> >>>>>>>>>>>> [19288.704292] ath: Regpair detected: 0x30
> >>>>>>>>>>>> [19288.704294] ath9k: Rate: 1Mbps, ratecode: 27
> >>>>>>>>>>>> [19288.704295] ath9k: Rate: 2Mbps, ratecode: 26
> >>>>>>>>>>>> [19288.704297] ath9k: Rate: 5Mbps, ratecode: 25
> >>>>>>>>>>>> [19288.704298] ath9k: Rate: 11Mbps, ratecode: 24
> >>>>>>>>>>>> [19288.704299] ath9k: Rate: 6Mbps, ratecode: 11
> >>>>>>>>>>>> [19288.704300] ath9k: Rate: 9Mbps, ratecode: 15
> >>>>>>>>>>>> [19288.704302] ath9k: Rate: 12Mbps, ratecode: 10
> >>>>>>>>>>>> [19288.704303] ath9k: Rate: 18Mbps, ratecode: 14
> >>>>>>>>>>>> [19288.704304] ath9k: Rate: 24Mbps, ratecode: 9
> >>>>>>>>>>>> [19288.704305] ath9k: Rate: 36Mbps, ratecode: 13
> >>>>>>>>>>>> [19288.704306] ath9k: Rate: 48Mbps, ratecode: 8
> >>>>>>>>>>>> [19288.704307] ath9k: Rate: 54Mbps, ratecode: 12
> >>>>>>>>>>>> [19288.704309] ath9k: Rate: 6Mbps, ratecode: 11
> >>>>>>>>>>>> [19288.704310] ath9k: Rate: 9Mbps, ratecode: 15
> >>>>>>>>>>>> [19288.704311] ath9k: Rate: 12Mbps, ratecode: 10
> >>>>>>>>>>>> [19288.704312] ath9k: Rate: 18Mbps, ratecode: 14
> >>>>>>>>>>>> [19288.704313] ath9k: Rate: 24Mbps, ratecode: 9
> >>>>>>>>>>>> [19288.704315] ath9k: Rate: 36Mbps, ratecode: 13
> >>>>>>>>>>>> [19288.704316] ath9k: Rate: 48Mbps, ratecode: 8
> >>>>>>>>>>>> [19288.704317] ath9k: Rate: 54Mbps, ratecode: 12
> >>>>>>>>>>>> [19288.704339] ath9k: tx DMA: 512 buffers 1 desc/buf
> >>>>>>>>>>>> [19288.704379] ath9k: tx DMA map: ffff88009f400000
> (77824) -> 0 (77824)
> >>>>>>>>>>>> [19288.704406] ath9k: beacon DMA: 4 buffers 1 desc/buf
> >>>>>>>>>>>> [19288.704408] ath9k: beacon DMA map:
> ffff88009f577000 (608) -> 0 (608)
> >>>>>>>>>>>> [19288.704410] ath9k: cachelsz 64 rxbufsize 3904
> >>>>>>>>>>>> [19288.704412] ath9k: rx DMA: 512 buffers 1 desc/buf
> >>>>>>>>>>>> [19288.704455] ath9k: rx DMA map: ffff8800ac560000
> (77824) -> 0 (77824)
> >>>>>>>>>>>> [19288.707111] phy0: Selected rate control algorithm
> 'ath9k_rate_control'
> >>>>>>>>>>>> [19288.707656] cfg80211: Calling CRDA for country: AM
> >>>>>>>>>>>> [19288.707680] Registered led device: ath9k-phy0::radio
> >>>>>>>>>>>> [19288.707689] Registered led device: ath9k-phy0::assoc
> >>>>>>>>>>>> [19288.707699] Registered led device: ath9k-phy0::tx
> >>>>>>>>>>>> [19288.707711] Registered led device: ath9k-phy0::rx
> >>>>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2
> AR2133 RF Rev:81:
> >>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> ip link set wlan0 up
> >>>>>>>>>>>>
> >>>>>>>>>>>> [19365.389282] ath9k: Starting driver with initial
> channel: 2412 MHz
> >>>>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
> >>>>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
> >>>>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
> >>>>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 102
> >>>>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 15, cw_max: 31, txop: 188
> >>>>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is
> not ready
> >>>>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>>
> >>>>>>>>>>>> iwconfig wlan0 essid dlink
> >>>>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2
> AR2133 RF Rev:81:
> >>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> >>>>>>>>>>>> [19365.389282] ath9k: Starting driver with initial
> channel: 2412 MHz
> >>>>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
> >>>>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
> >>>>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
> >>>>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 102
> >>>>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 15, cw_max: 31, txop: 188
> >>>>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is
> not ready
> >>>>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19457.759393] ath9k: Set HW RX filter: 0x10
> >>>>>>>>>>>> [19457.789264] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19457.789270] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.789373] ath9k: (2412 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19457.853264] ath9k: Set channel: 2417 MHz
> >>>>>>>>>>>> [19457.853269] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.853363] ath9k: (2412 MHz) -> (2417 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19457.914263] ath9k: Set channel: 2422 MHz
> >>>>>>>>>>>> [19457.914268] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.918980] ath9k: (2417 MHz) -> (2422 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19457.980263] ath9k: Set channel: 2427 MHz
> >>>>>>>>>>>> [19457.980268] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.980363] ath9k: (2422 MHz) -> (2427 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.041263] ath9k: Set channel: 2432 MHz
> >>>>>>>>>>>> [19458.041268] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.041363] ath9k: (2427 MHz) -> (2432 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.102264] ath9k: Set channel: 2437 MHz
> >>>>>>>>>>>> [19458.102271] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.102368] ath9k: (2432 MHz) -> (2437 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.163262] ath9k: Set channel: 2442 MHz
> >>>>>>>>>>>> [19458.163267] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.163360] ath9k: (2437 MHz) -> (2442 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.235263] ath9k: Set channel: 2447 MHz
> >>>>>>>>>>>> [19458.235269] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.235450] ath9k: (2442 MHz) -> (2447 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.296257] ath9k: Set channel: 2452 MHz
> >>>>>>>>>>>> [19458.296258] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.296344] ath9k: (2447 MHz) -> (2452 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.357257] ath9k: Set channel: 2457 MHz
> >>>>>>>>>>>> [19458.357258] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.357344] ath9k: (2452 MHz) -> (2457 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.418257] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19458.418258] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.418344] ath9k: (2457 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.479263] ath9k: Set channel: 2467 MHz
> >>>>>>>>>>>> [19458.479267] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.479362] ath9k: (2462 MHz) -> (2467 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.680270] ath9k: Set channel: 2472 MHz
> >>>>>>>>>>>> [19458.680280] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.680381] ath9k: (2467 MHz) -> (2472 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.881265] ath9k: Set channel: 2484 MHz
> >>>>>>>>>>>> [19458.881270] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.881367] ath9k: (2472 MHz) -> (2484 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19459.082271] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19459.082278] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19459.082452] ath9k: (2484 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19459.084497] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19459.085175] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19459.091031] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19459.091252] ath9k: (2412 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19459.095097] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 3, cw_max: 7, txop: 47
> >>>>>>>>>>>> [19459.095114] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 94
> >>>>>>>>>>>> [19459.095125] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19459.095136] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19459.095272] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19459.099880] wlan0: authenticated
> >>>>>>>>>>>> [19459.099885] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19459.299265] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19459.306086] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>> [19460.306269] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 1
> >>>>>>>>>>>> [19460.316796] wlan0 direct probe responded
> >>>>>>>>>>>> [19460.316801] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19460.319702] wlan0: authenticated
> >>>>>>>>>>>> [19460.319707] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19460.519264] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> this is while ap is in N mode.
> >>>>>>>>>>>>
> >>>>>>>>>>>> This is after i set it mixed NBG:
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> [19460.519264] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>> [19601.885667] ath9k: Set HW RX filter: 0x10
> >>>>>>>>>>>> [19601.917026] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19601.917034] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19601.917192] ath9k: (2462 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19601.978014] ath9k: Set channel: 2417 MHz
> >>>>>>>>>>>> [19601.978019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19601.978114] ath9k: (2412 MHz) -> (2417 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.039014] ath9k: Set channel: 2422 MHz
> >>>>>>>>>>>> [19602.039018] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.043759] ath9k: (2417 MHz) -> (2422 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.104014] ath9k: Set channel: 2427 MHz
> >>>>>>>>>>>> [19602.104019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.108744] ath9k: (2422 MHz) -> (2427 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.169030] ath9k: Set channel: 2432 MHz
> >>>>>>>>>>>> [19602.169040] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.169144] ath9k: (2427 MHz) -> (2432 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.230009] ath9k: Set channel: 2437 MHz
> >>>>>>>>>>>> [19602.230012] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.230100] ath9k: (2432 MHz) -> (2437 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.291015] ath9k: Set channel: 2442 MHz
> >>>>>>>>>>>> [19602.291019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.291110] ath9k: (2437 MHz) -> (2442 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.352012] ath9k: Set channel: 2447 MHz
> >>>>>>>>>>>> [19602.352016] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.352107] ath9k: (2442 MHz) -> (2447 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.413008] ath9k: Set channel: 2452 MHz
> >>>>>>>>>>>> [19602.413010] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.413097] ath9k: (2447 MHz) -> (2452 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.474007] ath9k: Set channel: 2457 MHz
> >>>>>>>>>>>> [19602.474009] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.474519] ath9k: (2452 MHz) -> (2457 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.535014] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19602.535019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.535115] ath9k: (2457 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.596014] ath9k: Set channel: 2467 MHz
> >>>>>>>>>>>> [19602.596019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.596115] ath9k: (2462 MHz) -> (2467 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.797021] ath9k: Set channel: 2472 MHz
> >>>>>>>>>>>> [19602.797032] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.797136] ath9k: (2467 MHz) -> (2472 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.998018] ath9k: Set channel: 2484 MHz
> >>>>>>>>>>>> [19602.998025] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.998124] ath9k: (2472 MHz) -> (2484 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19603.199023] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19603.199031] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19603.199198] ath9k: (2484 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19603.200703] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19603.200723] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19603.200728] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19603.200893] ath9k: (2462 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19603.205188] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 3, cw_max: 7, txop: 47
> >>>>>>>>>>>> [19603.205203] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 94
> >>>>>>>>>>>> [19603.205213] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.205224] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.205364] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19603.208182] wlan0: authenticated
> >>>>>>>>>>>> [19603.208189] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19603.216915] wlan0: RX AssocResp from
> 00:1e:58:b4:f6:83 (capab=0x421
> >>>>>>>>>>>> status=0 aid=1)
> >>>>>>>>>>>> [19603.216920] wlan0: associated
> >>>>>>>>>>>> [19603.216952] ath9k: Choosing rate table for mode: 10
> >>>>>>>>>>>> [19603.217411] ath9k: RC Initialized with
> capabilities: 0x0
> >>>>>>>>>>>> [19603.217420] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 3, cw_max: 7, txop: 47
> >>>>>>>>>>>> [19603.217437] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 94
> >>>>>>>>>>>> [19603.217451] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.217466] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.217536] ath9k: RX filter 0x0 bssid
> 00:1e:58:b4:f6:83 aid 0x0
> >>>>>>>>>>>> [19603.217541] ath9k: BSS Changed PREAMBLE 1
> >>>>>>>>>>>> [19603.217546] ath9k: BSS Changed ASSOC 1
> >>>>>>>>>>>> [19603.217550] ath9k: Bss Info ASSOC 1, bssid:
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19603.218918] ADDRCONF(NETDEV_CHANGE): wlan0: link
> becomes ready
> >>>>>>>>>>>> [19603.218977] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> I am off to bed, i live in GMT0(+1) time zone
> >>>>>>>>>>>> Hopefully see ya tomorrow.
> >>>>>>>>>>>> Is there an IRC channel or anything? this is just slow.
> >>>>>>>>>>>> Regards
> >>>>>>>>>>>> Dmitri
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>> Hello Luis.
> >>>>>>>>>>>
> >>>>>>>>>>> I don't mean to rush you, was only wandering, what is
> story with report
> >>>>>>>>>>> i have submitted, any progress on it yet?
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>> So I am working on other items and was hoping someone
> else could tackle this
> >>>>>>>>>> but it seems everyone has been busy with other items as
> well. I'll try to help
> >>>>>>>>>> you with this but I'm as in the dark with this issue as
> you are right now. We'll
> >>>>>>>>>> need to debug futher.
> >>>>>>>>>>
> >>>>>>>>>> Did you see the other thread about a similar issue? It
> seemed the person was
> >>>>>>>>>> running Network Manager (and that spawns it own
> wpa_supplicant).
> >>>>>>>>>>
> >>>>>>>>>> Just to confirm -- are you certain you don't have any
> instance of nm-applet,
> >>>>>>>>>> NetworkManager or a wpa_supplicant running in the
> background?
> >>>>>>>>>>
> >>>>>>>>>> Luis
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>> Hello Luis.
> >>>>>>>>>
> >>>>>>>>> I have no idea what is nm-applet. I am as close to bare
> bones as
> >>>>>>>>> possible. I am using gentoo distribution, it by design
> is not using any
> >>>>>>>>> graphical interfaces. to set up network, you have to set
> it up initially
> >>>>>>>>> manually(using available comands or text editor), it
> doesn't even have
> >>>>>>>>> DHCP client by default!
> >>>>>>>>> typically if what you have mentioned is part of start up
> scripts - i
> >>>>>>>>> would know about it.(since most of them if not installed
> by default -
> >>>>>>>>> are not starting up by default)
> >>>>>>>>>
> >>>>>>>>> emerge -s nm-applet
> >>>>>>>>> Searching...
> >>>>>>>>> [ Results for search key : nm-applet ]
> >>>>>>>>> [ Applications found : 1 ]
> >>>>>>>>>
> >>>>>>>>> * gnome-extra/nm-applet
> >>>>>>>>> Latest version available: 0.6.6
> >>>>>>>>> Latest version installed: [ Not Installed ]
> >>>>>>>>>
> >>>>>>>>> I am not sure what is "wpa_supplicant", since from what
> i understand
> >>>>>>>>> it's not user land executable.
> >>>>>>>>>
> >>>>>>>>> rc-status
> >>>>>>>>> Runlevel: default
> >>>>>>>>> acpid
> >>>>>>>>> [ started ]
> >>>>>>>>> alsasound
> >>>>>>>>> [ started ]
> >>>>>>>>> clamd
> >>>>>>>>> [ started ]
> >>>>>>>>> hald
> >>>>>>>>> [ started ]
> >>>>>>>>> hdparm
> >>>>>>>>> [ started ]
> >>>>>>>>> lm_sensors
> >>>>>>>>> [ started ]
> >>>>>>>>> local
> >>>>>>>>> [ started ]
> >>>>>>>>> netmount
> >>>>>>>>> [ started ]
> >>>>>>>>> smartd
> >>>>>>>>> [ started ]
> >>>>>>>>> syslog-ng
> >>>>>>>>> [ started ]
> >>>>>>>>>
> >>>>>>>>> All my network settings are done explicitly by hands or
> with use of
> >>>>>>>>> command line dhcp client. There is only one automated
> network script.,
> >>>>>>>>> which runs dhcp client on any available ethernet
> interface, which is my
> >>>>>>>>> eth0 card.
> >>>>>>>>>
> >>>>>>>>> emerge -s wpa_supplicant
> >>>>>>>>> Searching...
> >>>>>>>>> [ Results for search key : wpa_supplicant ]
> >>>>>>>>> [ Applications found : 1 ]
> >>>>>>>>>
> >>>>>>>>> * net-wireless/wpa_supplicant
> >>>>>>>>> Latest version available: 0.6.4
> >>>>>>>>> Latest version installed: [ Not Installed ]
> >>>>>>>>> Size of files: 972 kB
> >>>>>>>>> Homepage:
> http://hostap.epitest.fi/wpa_supplicant/
> >>>>>>>>> Description: IEEE 802.1X/WPA supplicant for
> secure wireless
> >>>>>>>>> transfers
> >>>>>>>>> License: || ( GPL-2 BSD )
> >>>>>>>>>
> >>>>>>>>> No gnome networking software is installed, at least not
> running for sure.
> >>>>>>>>> i can send you output of pstree if you like,
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>> Yes, send that please. wpa_supplicant is a userspace
> application, used for
> >>>>>>>> connecting to WPA / WPA2 networks. It also is also
> responsible for roaming
> >>>>>>>> for us in Linux. Network Manager uses it on the GNOME /
> KDE desktop, and the
> >>>>>>>> applet on the top right hand side of the desktop that
> lets you select which
> >>>>>>>> wireless network to connect to is the "nm-applet".
> >>>>>>>>
> >>>>>>>> Luis
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>> Sure, if you look carefully into emerge outputs i have
> send previously -
> >>>>>>> you will see, that none of those packages are actually
> installed!
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>> Hello Luis.
> >>>>>>
> >>>>>> Just wondering is there any update on the problem? Is there
> anything I
> >>>>>> can do to help identify problem?
> >>>>>>
> >>>>>>
> >>>>>>
> >>>> Dmitri, can you provide a tcmpdump (pcap) capture of this?
> >>>>
> >>>> Luis
> >>>>
> >>>>
> >>>>
> >>> Hello Luis,
> >>> I assume you have misspelled, (i am not familiar with tcmpdump
> anyway).
> >>> Please see attachment for step by step log.
> >>> Let me know what you want me to do next.
> >>> Regards
> >>>
> >>>
> >> Do you still want me to submit something to kernel.org
> <http://kernel.org>?
> >>
> >
> > Hm, nah, someone will follow up with you soon, if not just
> > reply to the thread (not me).
> >
> > Luis
> >
> Hi guys, any news?
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org <mailto:ath9k-devel@lists.ath9k.org>
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: make.txt
Url: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20090727/9ad5d65d/attachment-0001.txt
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-07-25 17:37 ` Senthilkumar Balasubramanian
2009-07-25 18:54 ` Dmitri Seletski
2009-07-27 20:04 ` Dmitri Seletski
@ 2009-08-05 3:43 ` Dmitri Seletski
2009-08-05 15:34 ` Luis R. Rodriguez
2 siblings, 1 reply; 39+ messages in thread
From: Dmitri Seletski @ 2009-08-05 3:43 UTC (permalink / raw)
To: ath9k-devel
Hi guys.
Below part of output of tcpdump(sorry, wireshark seem to be confusing,
hope you don't mind)
This is pure Nmode on access point:
3 first lines a to are typical and are 99% of all output
04:32:56.453590 1280548648us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.469976 1280565032us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.486363 1280810792us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.488773 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:32:56.491313 1280815742us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
11.0* 6.0* 9.0 12.0* 18.0 Mbit] CH: 7
04:32:56.492189 1280817114us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
Unknown)
04:32:56.492194 1.0 Mb/s [0x0000000f] Authentication (Open System)-1:
Succesful
04:32:56.493730 1280818160us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
signal antenna 1 [0x0000000e] Authentication (Open System)-2:
04:32:56.494782 1280819702us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
Unknown)
04:32:56.494786 1.0 Mb/s [0x0000000f] Assoc Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:32:56.502748 1280827177us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.519151 1280614185us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.535535 1280630569us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.551954 1280679753us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.568305 1280696106us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.584690 1280679722us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.601107 1280696136us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.617693 1280811023us tsft 1.0 Mb/s 2442 MHz (0x00a0) -48dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.633918 1280827243us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.650241 1280745259us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.666623 1280761643us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.683039 1280810827us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.694840 1280823128us tsft 1.0 Mb/s 2442 MHz (0x00a0) -48dB
signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
Unknown)
04:32:56.694847 1.0 Mb/s [0x0000000f] Assoc Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:32:56.700578 1280828368us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
signal antenna 1 [0x0000000e] DeAuthentication (00:1e:58:b4:f6:83 (oui
Unknown)): Station requesting (re)association is not authenticated with
responding station
04:32:56.703486 1280831275us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
04:32:56.719871 1280814892us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
9.0 12.0* 18.0 Mbit] ESS CH: 7
I get this output during: iw dev wlan0 connect dlink
ip link 6: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
pfifo_fast state DOWN qlen 1000
link/ether 00:22:b0:bc:1e:1e brd ff:ff:ff:ff:ff:ff
7: moni0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UNKNOWN qlen 1000
link/ieee802.11/radiotap 00:22:b0:bc:1e:1e brd ff:ff:ff:ff:ff:ff
_______________________________________________________________________________________________________________
And below its abgn mode
04:39:03.215511 1647283601us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:03.231910 1647299985us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:03.248287 1648332177us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:03.264676 1648348562us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:03.281062 1647349138us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:03.329450 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:03.423975 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:03.488971 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:03.520442 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:03.559646 1647627670us tsft 1.0 Mb/s 2432 MHz (0x00a0) -90dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:03.581465 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:03.625187 1647693206us tsft 1.0 Mb/s 2437 MHz (0x00a0) -82dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:03.642427 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:03.648832 1647815187us tsft 1.0 Mb/s 2437 MHz (0x00a0) -83dB
signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
04:39:03.657908 1647824279us tsft 1.0 Mb/s 2437 MHz (0x00a0) -84dB
signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:03.690650 1647758743us tsft 1.0 Mb/s 2442 MHz (0x00a0) -50dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:03.707057 1647807897us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:03.717424 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:03.719941 1647820779us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
04:39:03.723443 1647824280us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:03.739833 1647807897us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:03.772612 1648332184us tsft 1.0 Mb/s 2447 MHz (0x00a0) -58dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:03.777429 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:03.783900 1648343470us tsft 1.0 Mb/s 2447 MHz (0x00a0) -58dB
signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
04:39:03.788987 1648348569us tsft 1.0 Mb/s 2447 MHz (0x00a0) -57dB
signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:03.805379 1647873432us tsft 1.0 Mb/s 2447 MHz (0x00a0) -57dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:03.852419 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:03.927414 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:03.987411 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:04.018806 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:04.021318 1648089364us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
04:39:04.022226 1648090773us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
Unknown)
04:39:04.022231 1.0 Mb/s [0x0000000f] Authentication (Open System)-1:
Succesful
04:39:04.023758 1648091803us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
signal antenna 1 [0x0000000e] Authentication (Open System)-2:
04:39:04.024889 1648093437us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
Unknown)
04:39:04.024894 1.0 Mb/s [0x0000000f] Assoc Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:04.032157 1648329583us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
signal antenna 1 [0x0000000e] Assoc Response AID(1) :: Succesful
04:39:04.036272 1648334194us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
Unknown)
04:39:04.034786 1.0 Mb/s [0x0000000f] IP6 :: > ff02::16: HBH [|icmp6]
04:39:04.038359 1664884124us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] ESS CH: 7
04:39:04.039975 19463110us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.041164 19497067us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.042353 19498256us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.043514 19499418us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.044679 19500562us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.045818 19501707us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.047085 19502976us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.048320 19504219us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.049556 19505453us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.050822 19506723us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.055245 19511146us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:04.071647 19527530us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:04.088028 19511146us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:04.104423 19527531us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:04.120803 19642218us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:04.149433 2.0 Mb/s [0x0000000f]
04:39:04.503329 20942716us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:04.501812 1.0 Mb/s [0x0000000f] IP6 :: > ff02::1:ffbc:1e1e: ICMP6,
neighbor solicitation[|icmp6]
04:39:04.504875 20943764us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.505994 20944884us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.507079 20945967us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.508261 20947150us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.509343 20948234us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.510507 20949390us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.511658 20950545us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.514056 20952943us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:04.515080 20953959us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.516211 20955088us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.517352 20956216us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:04.530479 20969322us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:04.546855 19969898us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:04.563212 19986282us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:04.579594 20035434us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:04.595989 20051818us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:04.617738 2.0 Mb/s [0x0000000f]
04:39:05.180352 20702195us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:05.178785 1.0 Mb/s [0x0000000f] IP6 :: > ff02::16: HBH [|icmp6]
04:39:05.181994 20703339us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.183200 20704546us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.184468 20705815us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.186864 20708209us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:05.187979 20611014us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.189232 20612266us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.190505 20613536us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.191708 20614725us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.192892 20615913us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.194097 20617129us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.195241 20618274us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.201228 20624259us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:05.218635 20641642us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:05.234997 20690795us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:05.251398 20707178us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:05.267772 20690794us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:05.293325 2.0 Mb/s [0x0000000f]
04:39:05.503289 20959543us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:05.501830 1.0 Mb/s [0x0000000f] IP6 fe80::222:b0ff:febc:1e1e >
ff02::2: ICMP6, router solicitation, length 16
04:39:05.504794 20960537us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.505776 20961530us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.506800 20962550us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.507837 20963597us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.508945 20964706us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.509975 20965735us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.511021 20966781us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.512062 20967819us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.513989 20969748us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:05.514949 20970701us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.516020 20939007us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:05.529989 20952938us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:05.546372 20969321us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:05.562724 25147243us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:05.579128 25163626us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:05.595495 21018475us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:05.616362 2.0 Mb/s [0x0000000f]
04:39:07.850996 23307094us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:07.851002 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:07.852960 23276296us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:07.856162 23257963us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:07.873049 23328618us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:07.889438 23312234us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:07.905820 23328618us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:07.922235 23574408us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:07.938595 23590762us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:07.973338 1.0 Mb/s [0x0000000f]
04:39:09.503187 25155739us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:09.501785 1.0 Mb/s [0x0000000f] IP6 fe80::222:b0ff:febc:1e1e >
ff02::2: ICMP6, router solicitation, length 16
04:39:09.504722 25156777us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:09.505758 25157815us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:09.506842 25158898us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:09.507881 25159936us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:09.508920 25160974us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:09.510010 25162065us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:09.511938 25163994us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:09.513011 25165046us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:09.514026 24936681us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:09.515106 24937763us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:09.516121 24938756us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:09.527980 24950634us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:09.544364 24967018us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:09.560749 25016169us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:09.577142 25032554us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:09.593528 25016171us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:09.617753 2.0 Mb/s [0x0000000f]
04:39:11.851048 29338413us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:11.851055 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:11.852960 29307561us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:11.855235 27256681us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:11.870110 29356933us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:11.887497 27309932us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:11.903868 27326314us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:11.920265 27375466us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:11.936639 27391851us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:11.952861 27375466us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:11.971207 1.0 Mb/s [0x0000000f]
04:39:13.504558 28960148us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:13.502293 1.0 Mb/s [0x0000000f] IP6 fe80::222:b0ff:febc:1e1e >
ff02::2: ICMP6, router solicitation, length 16
04:39:13.506118 28961214us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:13.507224 28962323us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:13.509637 28964736us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:13.510593 28965670us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:13.511713 28934021us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:13.512715 28935023us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:13.513833 28936142us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:13.514821 28937126us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:13.515815 28938119us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:13.516884 28939193us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:13.517967 28940276us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] [|ip6]
04:39:13.526024 28948330us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:13.542409 28964715us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:13.558797 29079402us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:13.575179 29095786us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:13.592599 29014890us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:13.616633 2.0 Mb/s [0x0000000f]
04:39:15.851129 31306506us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:15.851137 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:15.853789 31308681us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:15.855134 31277734us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:15.868664 31302506us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:15.885543 31307627us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:15.901914 31324010us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:15.918297 31438698us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:15.935706 31456106us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:15.951069 31373162us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:15.973863 1.0 Mb/s [0x0000000f]
04:39:18.851959 34274337us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:18.851966 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:18.853870 34276254us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:18.867171 34268010us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:18.884061 34338665us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:18.900444 34322282us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:18.916851 34338667us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:18.933215 34584426us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:18.949602 34600811us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:18.971559 1.0 Mb/s [0x0000000f]
04:39:21.850505 37272635us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:21.850512 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:21.852488 37733358us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:21.865707 37266282us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:21.882615 37336938us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:21.898999 37353322us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:21.916409 37337962us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:21.931750 37353323us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:21.948157 37468010us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:21.973422 1.0 Mb/s [0x0000000f]
04:39:24.851008 40272861us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:24.851015 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:24.852900 40340295us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:24.864263 40264554us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:24.881148 40302443us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:24.897512 40351594us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:24.914234 40368292us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:24.930305 40351596us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:24.946690 40367978us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:24.971469 1.0 Mb/s [0x0000000f]
04:39:27.850941 43501912us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:27.850948 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:27.852906 43471112us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:27.862778 43492203us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:27.879699 43300745us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:27.896045 43317098us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:27.912467 43366281us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:27.928816 43382635us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:27.945207 43366251us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:27.971128 1.0 Mb/s [0x0000000f]
04:39:30.850892 46370527us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:30.850898 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:30.852744 46339611us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:30.861308 46261099us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:30.878209 46397290us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:30.894579 46315371us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:30.910979 46331754us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:30.927350 46380906us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:30.943793 46397322us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:30.970464 1.0 Mb/s [0x0000000f]
04:39:33.851022 49272091us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:33.851028 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:33.852960 49274033us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:33.859841 49259370us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:33.876784 50313095us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:33.893115 50329450us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:33.909905 49330410us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:33.925905 49346409us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:33.942290 49395562us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:33.971973 1.0 Mb/s [0x0000000f]
04:39:36.850798 52271601us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:36.850804 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:36.852688 52273499us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:36.858376 52257642us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:36.875283 52295530us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:36.891668 52410218us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:36.908059 52426603us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:36.924439 52344682us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:36.940827 52361066us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:36.973980 1.0 Mb/s [0x0000000f]
04:39:39.851659 55304972us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:39.851665 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:39.853617 55306934us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:39.856908 55288682us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:39.873822 55293802us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:39.890203 55310187us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:39.906567 55555946us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:39.922974 55572330us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:39.939360 55359339us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:39.974783 1.0 Mb/s [0x0000000f]
04:39:42.850849 58303900us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:42.850855 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:42.852791 58273074us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:42.855442 58254186us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:42.872351 58324842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:42.888738 58308458us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:42.905101 58324842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:42.921506 58439531us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:42.937892 58455914us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:42.972432 1.0 Mb/s [0x0000000f]
04:39:45.851788 61271803us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:45.851794 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:45.854477 61274003us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:45.855829 61275814us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:45.870361 61268842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:45.887248 61339498us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:45.903634 61323115us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:45.920019 61339497us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:45.936404 61847402us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:45.952795 61863786us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:45.972991 1.0 Mb/s [0x0000000f]
04:39:48.851057 64270817us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:48.851063 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:48.853446 64272708us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:48.854905 64471237us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:48.868913 64267114us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:48.885812 64337770us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:48.902180 64354154us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:48.918568 64337770us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:48.934949 64354154us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:48.951336 64468842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:48.972129 1.0 Mb/s [0x0000000f]
04:39:51.850068 67367868us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:51.850074 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:51.852571 67369874us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:51.853922 67338918us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:51.867428 67265386us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:51.884315 67303274us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:51.900732 67352456us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:51.917115 67368839us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:51.933473 67352425us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:51.949858 67368810us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:51.972299 1.0 Mb/s [0x0000000f]
04:39:54.850778 71285815us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
04:39:54.850785 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
11.0 6.0 9.0 12.0 18.0 Mbit]
04:39:54.852636 71254909us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
9.0 12.0 18.0 Mbit] CH: 7
04:39:54.865964 71279467us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:54.882881 70301577us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:54.899295 70317974us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:54.915634 70367083us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:54.932025 70383466us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:54.948410 70367083us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
18.0 Mbit] ESS CH: 7
04:39:54.971519 1.0 Mb/s [0x0000000f]
Should i bother put output into separate attachments?
Let me know what you want me to try next.
Dmitri
Senthilkumar Balasubramanian wrote:
> Dmirtri
>
> Sorry! for the delayed reply from our side. We have submitted critical
> bug fixes in the recent times and most of them were merged into
> wireless-testing only recently. I assume you are using a PCI 11n Card
> (not a PCI-E card). Also If i have understood the thread correctly,
> bgn mode shows very low throughput and N mode doesn't connect at all.
>
> Please try the latest wireless-testing and in the mean while, let me
> work on some instrumentation code for you.
>
> Also if possible, please provide us the wireshark packet capture. You
> have to run the following command to create a monitor mode interface
> and capture the frames on "moni0" interface using wireshark when the
> problem happens. Please capture for both bgn and n only modes.
> iw phy phy0 interface add moni0 type monitor
> Please refer to for more information on how to add a monitor mode
> interface using which you can capture wireless frames in wireshark tool.
> http://linuxwireless.org/en/users/Documentation/iw
>
> Thanks
> Senthil
>
> On Sat, Jul 25, 2009 at 6:19 AM, Dmitri Seletski <drjoms@gmail.com
> <mailto:drjoms@gmail.com>> wrote:
>
> Luis R. Rodriguez wrote:
> > On Mon, Jun 15, 2009 at 03:49:29PM -0700, Dmitri Seletski wrote:
> >
> >> Dmitri Seletski wrote:
> >>
> >>> Luis R. Rodriguez wrote:
> >>>
> >>>
> >>>> On Mon, Jun 15, 2009 at 09:01:44AM -0700, Luis Rodriguez wrote:
> >>>>
> >>>>
> >>>>
> >>>>> On Sat, Jun 13, 2009 at 05:35:24PM -0700, Dmitri Seletski wrote:
> >>>>>
> >>>>>
> >>>>>
> >>>>>> Dmitri Seletski wrote:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>> On Tue, Jun 09, 2009 at 02:59:23PM -0700, Dmitri Seletski
> wrote:
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>> On Tue, Jun 09, 2009 at 08:56:01AM -0700, Dmitri
> Seletski wrote:
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>> Dmitri Seletski wrote:
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>> On Mon, May 18, 2009 at 4:59 PM, Luis R. Rodriguez
> >>>>>>>>>>>>> <lrodriguez@atheros.com
> <mailto:lrodriguez@atheros.com>> wrote:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>> On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri
> Seletski wrote:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski
> <drjoms at gmail.com <mailto:drjoms@gmail.com>> wrote:
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> compat-wireless-2009-05-19 # grep
> CONFIG_MAC80211_DEFAULT_PS config.mk <http://config.mk>
> >>>>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS=n
> >>>>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> make :)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> make unload
> >>>>>>>>>>>>>>>>> make install
> >>>>>>>>>>>>>>>>> modprobe ath9k
> >>>>>>>>>>>>>>>>> ip link set wlan0 up
> >>>>>>>>>>>>>>>>> iwconfig wlan0 essid dlink
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> last (IMHO)relevan't dmesg messages(got loads of
> dmesg history today)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2
> AR2133 RF Rev:81:
> >>>>>>>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> >>>>>>>>>>>>>>>>> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link
> is not ready
> >>>>>>>>>>>>>>>>> [14216.110829] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 1
> >>>>>>>>>>>>>>>>> [14216.310267] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 2
> >>>>>>>>>>>>>>>>> [14216.316846] wlan0 direct probe responded
> >>>>>>>>>>>>>>>>> [14216.316848] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14216.320962] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14216.320964] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14216.520277] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14216.527099] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> I believe reason 9 is you're AP tells you that
> you are trying to
> >>>>>>>>>>>>>>>> associate to it without first having authenticated.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14217.527273] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 3
> >>>>>>>>>>>>>>>>> [14217.727264] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>>>>>> [14231.356054] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14231.359188] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14231.359191] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14231.367102] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> And we repeat this here.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14232.367277] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 1
> >>>>>>>>>>>>>>>>> [14232.567284] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 2
> >>>>>>>>>>>>>>>>> [14232.570837] wlan0 direct probe responded
> >>>>>>>>>>>>>>>>> [14232.570843] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14232.573250] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14232.573434] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14232.773283] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14232.780130] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> And here.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14233.780276] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 3
> >>>>>>>>>>>>>>>>> [14233.784639] wlan0 direct probe responded
> >>>>>>>>>>>>>>>>> [14233.784645] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14233.799082] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> Access point in N mode only currently.
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Hm OK.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> Switching to mixture of N, G, B and dmesg throws
> this:
> >>>>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>>>>>> [14435.358964] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14435.362920] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14435.362922] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14435.371750] wlan0: RX AssocResp from
> 00:1e:58:b4:f6:83 (capab=0x421
> >>>>>>>>>>>>>>>>> status=0 aid=1)
> >>>>>>>>>>>>>>>>> [14435.371752] wlan0: associated
> >>>>>>>>>>>>>>>>> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0:
> link becomes ready
> >>>>>>>>>>>>>>>>> [14435.839637] wlan0: disassociated (Reason: 8)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> This is the STA has left. Hm, lets try upgrading
> your supplicant...
> >>>>>>>>>>>>>>>> Can you try upgrading to the latest from git?
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> git://w1.fi/srv/git/hostap.git
> <http://w1.fi/srv/git/hostap.git>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Luis
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Hello Luis.
> >>>>>>>>>>>>>>> I have no idea what authentication you are talking
> about.
> >>>>>>>>>>>>>>> I am sure that i dont use any authentication.
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>> I'm talking about the 802.11 authentication which
> is always
> >>>>>>>>>>>>>> required prior to association (even when no
> encryption is enabled).
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Can you try a newer wpa_supplicant to see if that
> helps?
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>> That is, use a plaintext supplicant as follows:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> mcgrof at tesla ~ $ cat plaintext.conf
> >>>>>>>>>>>>> ctrl_interface=/var/run/wpa_supplicant
> >>>>>>>>>>>>> ap_scan=1
> >>>>>>>>>>>>> network={
> >>>>>>>>>>>>> key_mgmt=NONE
> >>>>>>>>>>>>> ssid="your-ssid"
> >>>>>>>>>>>>> scan_ssid=1
> >>>>>>>>>>>>> }
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> wpa_supplicant -i wlan0 -c plaintext.conf
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Luis
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>> Hello Luis.
> >>>>>>>>>>>>
> >>>>>>>>>>>> ou man, you scared shi* out of me :)
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> dimko wpa_supplicant # modprobe -r ath9k
> >>>>>>>>>>>> dimko wpa_supplicant # modprobe ath9k debug=0x00000200
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> [19251.514273] wlan0: deauthenticating by local
> choice (reason=3)
> >>>>>>>>>>>> [19251.808278] ath9k 0000:01:07.0: PCI INT A disabled
> >>>>>>>>>>>> [19251.808327] ath9k: Driver unloaded
> >>>>>>>>>>>> [19288.173497] cfg80211: Calling CRDA to update world
> regulatory domain
> >>>>>>>>>>>> [19288.277348] ath9k 0000:01:07.0: PCI INT A ->
> Link[LNKB] -> GSI 19
> >>>>>>>>>>>> (level, low) -> IRQ 19
> >>>>>>>>>>>> [19288.703537] ath9k: Eeprom VER: 14, REV: 2
> >>>>>>>>>>>> [19288.704291] ath: Country alpha2 being used: AM
> >>>>>>>>>>>> [19288.704292] ath: Regpair detected: 0x30
> >>>>>>>>>>>> [19288.704294] ath9k: Rate: 1Mbps, ratecode: 27
> >>>>>>>>>>>> [19288.704295] ath9k: Rate: 2Mbps, ratecode: 26
> >>>>>>>>>>>> [19288.704297] ath9k: Rate: 5Mbps, ratecode: 25
> >>>>>>>>>>>> [19288.704298] ath9k: Rate: 11Mbps, ratecode: 24
> >>>>>>>>>>>> [19288.704299] ath9k: Rate: 6Mbps, ratecode: 11
> >>>>>>>>>>>> [19288.704300] ath9k: Rate: 9Mbps, ratecode: 15
> >>>>>>>>>>>> [19288.704302] ath9k: Rate: 12Mbps, ratecode: 10
> >>>>>>>>>>>> [19288.704303] ath9k: Rate: 18Mbps, ratecode: 14
> >>>>>>>>>>>> [19288.704304] ath9k: Rate: 24Mbps, ratecode: 9
> >>>>>>>>>>>> [19288.704305] ath9k: Rate: 36Mbps, ratecode: 13
> >>>>>>>>>>>> [19288.704306] ath9k: Rate: 48Mbps, ratecode: 8
> >>>>>>>>>>>> [19288.704307] ath9k: Rate: 54Mbps, ratecode: 12
> >>>>>>>>>>>> [19288.704309] ath9k: Rate: 6Mbps, ratecode: 11
> >>>>>>>>>>>> [19288.704310] ath9k: Rate: 9Mbps, ratecode: 15
> >>>>>>>>>>>> [19288.704311] ath9k: Rate: 12Mbps, ratecode: 10
> >>>>>>>>>>>> [19288.704312] ath9k: Rate: 18Mbps, ratecode: 14
> >>>>>>>>>>>> [19288.704313] ath9k: Rate: 24Mbps, ratecode: 9
> >>>>>>>>>>>> [19288.704315] ath9k: Rate: 36Mbps, ratecode: 13
> >>>>>>>>>>>> [19288.704316] ath9k: Rate: 48Mbps, ratecode: 8
> >>>>>>>>>>>> [19288.704317] ath9k: Rate: 54Mbps, ratecode: 12
> >>>>>>>>>>>> [19288.704339] ath9k: tx DMA: 512 buffers 1 desc/buf
> >>>>>>>>>>>> [19288.704379] ath9k: tx DMA map: ffff88009f400000
> (77824) -> 0 (77824)
> >>>>>>>>>>>> [19288.704406] ath9k: beacon DMA: 4 buffers 1 desc/buf
> >>>>>>>>>>>> [19288.704408] ath9k: beacon DMA map:
> ffff88009f577000 (608) -> 0 (608)
> >>>>>>>>>>>> [19288.704410] ath9k: cachelsz 64 rxbufsize 3904
> >>>>>>>>>>>> [19288.704412] ath9k: rx DMA: 512 buffers 1 desc/buf
> >>>>>>>>>>>> [19288.704455] ath9k: rx DMA map: ffff8800ac560000
> (77824) -> 0 (77824)
> >>>>>>>>>>>> [19288.707111] phy0: Selected rate control algorithm
> 'ath9k_rate_control'
> >>>>>>>>>>>> [19288.707656] cfg80211: Calling CRDA for country: AM
> >>>>>>>>>>>> [19288.707680] Registered led device: ath9k-phy0::radio
> >>>>>>>>>>>> [19288.707689] Registered led device: ath9k-phy0::assoc
> >>>>>>>>>>>> [19288.707699] Registered led device: ath9k-phy0::tx
> >>>>>>>>>>>> [19288.707711] Registered led device: ath9k-phy0::rx
> >>>>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2
> AR2133 RF Rev:81:
> >>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> ip link set wlan0 up
> >>>>>>>>>>>>
> >>>>>>>>>>>> [19365.389282] ath9k: Starting driver with initial
> channel: 2412 MHz
> >>>>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
> >>>>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
> >>>>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
> >>>>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 102
> >>>>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 15, cw_max: 31, txop: 188
> >>>>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is
> not ready
> >>>>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>>
> >>>>>>>>>>>> iwconfig wlan0 essid dlink
> >>>>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2
> AR2133 RF Rev:81:
> >>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> >>>>>>>>>>>> [19365.389282] ath9k: Starting driver with initial
> channel: 2412 MHz
> >>>>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
> >>>>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
> >>>>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
> >>>>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 102
> >>>>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 15, cw_max: 31, txop: 188
> >>>>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is
> not ready
> >>>>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19457.759393] ath9k: Set HW RX filter: 0x10
> >>>>>>>>>>>> [19457.789264] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19457.789270] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.789373] ath9k: (2412 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19457.853264] ath9k: Set channel: 2417 MHz
> >>>>>>>>>>>> [19457.853269] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.853363] ath9k: (2412 MHz) -> (2417 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19457.914263] ath9k: Set channel: 2422 MHz
> >>>>>>>>>>>> [19457.914268] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.918980] ath9k: (2417 MHz) -> (2422 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19457.980263] ath9k: Set channel: 2427 MHz
> >>>>>>>>>>>> [19457.980268] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.980363] ath9k: (2422 MHz) -> (2427 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.041263] ath9k: Set channel: 2432 MHz
> >>>>>>>>>>>> [19458.041268] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.041363] ath9k: (2427 MHz) -> (2432 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.102264] ath9k: Set channel: 2437 MHz
> >>>>>>>>>>>> [19458.102271] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.102368] ath9k: (2432 MHz) -> (2437 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.163262] ath9k: Set channel: 2442 MHz
> >>>>>>>>>>>> [19458.163267] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.163360] ath9k: (2437 MHz) -> (2442 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.235263] ath9k: Set channel: 2447 MHz
> >>>>>>>>>>>> [19458.235269] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.235450] ath9k: (2442 MHz) -> (2447 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.296257] ath9k: Set channel: 2452 MHz
> >>>>>>>>>>>> [19458.296258] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.296344] ath9k: (2447 MHz) -> (2452 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.357257] ath9k: Set channel: 2457 MHz
> >>>>>>>>>>>> [19458.357258] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.357344] ath9k: (2452 MHz) -> (2457 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.418257] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19458.418258] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.418344] ath9k: (2457 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.479263] ath9k: Set channel: 2467 MHz
> >>>>>>>>>>>> [19458.479267] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.479362] ath9k: (2462 MHz) -> (2467 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.680270] ath9k: Set channel: 2472 MHz
> >>>>>>>>>>>> [19458.680280] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.680381] ath9k: (2467 MHz) -> (2472 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.881265] ath9k: Set channel: 2484 MHz
> >>>>>>>>>>>> [19458.881270] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.881367] ath9k: (2472 MHz) -> (2484 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19459.082271] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19459.082278] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19459.082452] ath9k: (2484 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19459.084497] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19459.085175] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19459.091031] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19459.091252] ath9k: (2412 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19459.095097] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 3, cw_max: 7, txop: 47
> >>>>>>>>>>>> [19459.095114] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 94
> >>>>>>>>>>>> [19459.095125] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19459.095136] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19459.095272] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19459.099880] wlan0: authenticated
> >>>>>>>>>>>> [19459.099885] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19459.299265] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19459.306086] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>> [19460.306269] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 1
> >>>>>>>>>>>> [19460.316796] wlan0 direct probe responded
> >>>>>>>>>>>> [19460.316801] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19460.319702] wlan0: authenticated
> >>>>>>>>>>>> [19460.319707] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19460.519264] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> this is while ap is in N mode.
> >>>>>>>>>>>>
> >>>>>>>>>>>> This is after i set it mixed NBG:
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> [19460.519264] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>> [19601.885667] ath9k: Set HW RX filter: 0x10
> >>>>>>>>>>>> [19601.917026] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19601.917034] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19601.917192] ath9k: (2462 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19601.978014] ath9k: Set channel: 2417 MHz
> >>>>>>>>>>>> [19601.978019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19601.978114] ath9k: (2412 MHz) -> (2417 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.039014] ath9k: Set channel: 2422 MHz
> >>>>>>>>>>>> [19602.039018] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.043759] ath9k: (2417 MHz) -> (2422 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.104014] ath9k: Set channel: 2427 MHz
> >>>>>>>>>>>> [19602.104019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.108744] ath9k: (2422 MHz) -> (2427 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.169030] ath9k: Set channel: 2432 MHz
> >>>>>>>>>>>> [19602.169040] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.169144] ath9k: (2427 MHz) -> (2432 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.230009] ath9k: Set channel: 2437 MHz
> >>>>>>>>>>>> [19602.230012] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.230100] ath9k: (2432 MHz) -> (2437 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.291015] ath9k: Set channel: 2442 MHz
> >>>>>>>>>>>> [19602.291019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.291110] ath9k: (2437 MHz) -> (2442 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.352012] ath9k: Set channel: 2447 MHz
> >>>>>>>>>>>> [19602.352016] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.352107] ath9k: (2442 MHz) -> (2447 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.413008] ath9k: Set channel: 2452 MHz
> >>>>>>>>>>>> [19602.413010] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.413097] ath9k: (2447 MHz) -> (2452 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.474007] ath9k: Set channel: 2457 MHz
> >>>>>>>>>>>> [19602.474009] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.474519] ath9k: (2452 MHz) -> (2457 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.535014] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19602.535019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.535115] ath9k: (2457 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.596014] ath9k: Set channel: 2467 MHz
> >>>>>>>>>>>> [19602.596019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.596115] ath9k: (2462 MHz) -> (2467 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.797021] ath9k: Set channel: 2472 MHz
> >>>>>>>>>>>> [19602.797032] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.797136] ath9k: (2467 MHz) -> (2472 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.998018] ath9k: Set channel: 2484 MHz
> >>>>>>>>>>>> [19602.998025] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.998124] ath9k: (2472 MHz) -> (2484 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19603.199023] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19603.199031] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19603.199198] ath9k: (2484 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19603.200703] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19603.200723] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19603.200728] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19603.200893] ath9k: (2462 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19603.205188] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 3, cw_max: 7, txop: 47
> >>>>>>>>>>>> [19603.205203] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 94
> >>>>>>>>>>>> [19603.205213] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.205224] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.205364] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19603.208182] wlan0: authenticated
> >>>>>>>>>>>> [19603.208189] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19603.216915] wlan0: RX AssocResp from
> 00:1e:58:b4:f6:83 (capab=0x421
> >>>>>>>>>>>> status=0 aid=1)
> >>>>>>>>>>>> [19603.216920] wlan0: associated
> >>>>>>>>>>>> [19603.216952] ath9k: Choosing rate table for mode: 10
> >>>>>>>>>>>> [19603.217411] ath9k: RC Initialized with
> capabilities: 0x0
> >>>>>>>>>>>> [19603.217420] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 3, cw_max: 7, txop: 47
> >>>>>>>>>>>> [19603.217437] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 94
> >>>>>>>>>>>> [19603.217451] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.217466] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.217536] ath9k: RX filter 0x0 bssid
> 00:1e:58:b4:f6:83 aid 0x0
> >>>>>>>>>>>> [19603.217541] ath9k: BSS Changed PREAMBLE 1
> >>>>>>>>>>>> [19603.217546] ath9k: BSS Changed ASSOC 1
> >>>>>>>>>>>> [19603.217550] ath9k: Bss Info ASSOC 1, bssid:
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19603.218918] ADDRCONF(NETDEV_CHANGE): wlan0: link
> becomes ready
> >>>>>>>>>>>> [19603.218977] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> I am off to bed, i live in GMT0(+1) time zone
> >>>>>>>>>>>> Hopefully see ya tomorrow.
> >>>>>>>>>>>> Is there an IRC channel or anything? this is just slow.
> >>>>>>>>>>>> Regards
> >>>>>>>>>>>> Dmitri
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>> Hello Luis.
> >>>>>>>>>>>
> >>>>>>>>>>> I don't mean to rush you, was only wandering, what is
> story with report
> >>>>>>>>>>> i have submitted, any progress on it yet?
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>> So I am working on other items and was hoping someone
> else could tackle this
> >>>>>>>>>> but it seems everyone has been busy with other items as
> well. I'll try to help
> >>>>>>>>>> you with this but I'm as in the dark with this issue as
> you are right now. We'll
> >>>>>>>>>> need to debug futher.
> >>>>>>>>>>
> >>>>>>>>>> Did you see the other thread about a similar issue? It
> seemed the person was
> >>>>>>>>>> running Network Manager (and that spawns it own
> wpa_supplicant).
> >>>>>>>>>>
> >>>>>>>>>> Just to confirm -- are you certain you don't have any
> instance of nm-applet,
> >>>>>>>>>> NetworkManager or a wpa_supplicant running in the
> background?
> >>>>>>>>>>
> >>>>>>>>>> Luis
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>> Hello Luis.
> >>>>>>>>>
> >>>>>>>>> I have no idea what is nm-applet. I am as close to bare
> bones as
> >>>>>>>>> possible. I am using gentoo distribution, it by design
> is not using any
> >>>>>>>>> graphical interfaces. to set up network, you have to set
> it up initially
> >>>>>>>>> manually(using available comands or text editor), it
> doesn't even have
> >>>>>>>>> DHCP client by default!
> >>>>>>>>> typically if what you have mentioned is part of start up
> scripts - i
> >>>>>>>>> would know about it.(since most of them if not installed
> by default -
> >>>>>>>>> are not starting up by default)
> >>>>>>>>>
> >>>>>>>>> emerge -s nm-applet
> >>>>>>>>> Searching...
> >>>>>>>>> [ Results for search key : nm-applet ]
> >>>>>>>>> [ Applications found : 1 ]
> >>>>>>>>>
> >>>>>>>>> * gnome-extra/nm-applet
> >>>>>>>>> Latest version available: 0.6.6
> >>>>>>>>> Latest version installed: [ Not Installed ]
> >>>>>>>>>
> >>>>>>>>> I am not sure what is "wpa_supplicant", since from what
> i understand
> >>>>>>>>> it's not user land executable.
> >>>>>>>>>
> >>>>>>>>> rc-status
> >>>>>>>>> Runlevel: default
> >>>>>>>>> acpid
> >>>>>>>>> [ started ]
> >>>>>>>>> alsasound
> >>>>>>>>> [ started ]
> >>>>>>>>> clamd
> >>>>>>>>> [ started ]
> >>>>>>>>> hald
> >>>>>>>>> [ started ]
> >>>>>>>>> hdparm
> >>>>>>>>> [ started ]
> >>>>>>>>> lm_sensors
> >>>>>>>>> [ started ]
> >>>>>>>>> local
> >>>>>>>>> [ started ]
> >>>>>>>>> netmount
> >>>>>>>>> [ started ]
> >>>>>>>>> smartd
> >>>>>>>>> [ started ]
> >>>>>>>>> syslog-ng
> >>>>>>>>> [ started ]
> >>>>>>>>>
> >>>>>>>>> All my network settings are done explicitly by hands or
> with use of
> >>>>>>>>> command line dhcp client. There is only one automated
> network script.,
> >>>>>>>>> which runs dhcp client on any available ethernet
> interface, which is my
> >>>>>>>>> eth0 card.
> >>>>>>>>>
> >>>>>>>>> emerge -s wpa_supplicant
> >>>>>>>>> Searching...
> >>>>>>>>> [ Results for search key : wpa_supplicant ]
> >>>>>>>>> [ Applications found : 1 ]
> >>>>>>>>>
> >>>>>>>>> * net-wireless/wpa_supplicant
> >>>>>>>>> Latest version available: 0.6.4
> >>>>>>>>> Latest version installed: [ Not Installed ]
> >>>>>>>>> Size of files: 972 kB
> >>>>>>>>> Homepage:
> http://hostap.epitest.fi/wpa_supplicant/
> >>>>>>>>> Description: IEEE 802.1X/WPA supplicant for
> secure wireless
> >>>>>>>>> transfers
> >>>>>>>>> License: || ( GPL-2 BSD )
> >>>>>>>>>
> >>>>>>>>> No gnome networking software is installed, at least not
> running for sure.
> >>>>>>>>> i can send you output of pstree if you like,
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>> Yes, send that please. wpa_supplicant is a userspace
> application, used for
> >>>>>>>> connecting to WPA / WPA2 networks. It also is also
> responsible for roaming
> >>>>>>>> for us in Linux. Network Manager uses it on the GNOME /
> KDE desktop, and the
> >>>>>>>> applet on the top right hand side of the desktop that
> lets you select which
> >>>>>>>> wireless network to connect to is the "nm-applet".
> >>>>>>>>
> >>>>>>>> Luis
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>> Sure, if you look carefully into emerge outputs i have
> send previously -
> >>>>>>> you will see, that none of those packages are actually
> installed!
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>> Hello Luis.
> >>>>>>
> >>>>>> Just wondering is there any update on the problem? Is there
> anything I
> >>>>>> can do to help identify problem?
> >>>>>>
> >>>>>>
> >>>>>>
> >>>> Dmitri, can you provide a tcmpdump (pcap) capture of this?
> >>>>
> >>>> Luis
> >>>>
> >>>>
> >>>>
> >>> Hello Luis,
> >>> I assume you have misspelled, (i am not familiar with tcmpdump
> anyway).
> >>> Please see attachment for step by step log.
> >>> Let me know what you want me to do next.
> >>> Regards
> >>>
> >>>
> >> Do you still want me to submit something to kernel.org
> <http://kernel.org>?
> >>
> >
> > Hm, nah, someone will follow up with you soon, if not just
> > reply to the thread (not me).
> >
> > Luis
> >
> Hi guys, any news?
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org <mailto:ath9k-devel@lists.ath9k.org>
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
>
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-08-05 3:43 ` Dmitri Seletski
@ 2009-08-05 15:34 ` Luis R. Rodriguez
2009-08-05 15:54 ` Dmitri Seletski
0 siblings, 1 reply; 39+ messages in thread
From: Luis R. Rodriguez @ 2009-08-05 15:34 UTC (permalink / raw)
To: ath9k-devel
On Tue, Aug 04, 2009 at 08:43:34PM -0700, Dmitri Seletski wrote:
> Hi guys.
>
> Below part of output of tcpdump(sorry, wireshark seem to be confusing,
> hope you don't mind)
> This is pure Nmode on access point:
> 3 first lines a to are typical and are 99% of all output
>
> 04:32:56.453590 1280548648us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.469976 1280565032us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.486363 1280810792us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.488773 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:32:56.491313 1280815742us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
> signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
> 11.0* 6.0* 9.0 12.0* 18.0 Mbit] CH: 7
> 04:32:56.492189 1280817114us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
> Unknown)
> 04:32:56.492194 1.0 Mb/s [0x0000000f] Authentication (Open System)-1:
> Succesful
> 04:32:56.493730 1280818160us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
> signal antenna 1 [0x0000000e] Authentication (Open System)-2:
> 04:32:56.494782 1280819702us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
> Unknown)
> 04:32:56.494786 1.0 Mb/s [0x0000000f] Assoc Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:32:56.502748 1280827177us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.519151 1280614185us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.535535 1280630569us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.551954 1280679753us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.568305 1280696106us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.584690 1280679722us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.601107 1280696136us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.617693 1280811023us tsft 1.0 Mb/s 2442 MHz (0x00a0) -48dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.633918 1280827243us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.650241 1280745259us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.666623 1280761643us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.683039 1280810827us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.694840 1280823128us tsft 1.0 Mb/s 2442 MHz (0x00a0) -48dB
> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
> Unknown)
> 04:32:56.694847 1.0 Mb/s [0x0000000f] Assoc Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:32:56.700578 1280828368us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
> signal antenna 1 [0x0000000e] DeAuthentication (00:1e:58:b4:f6:83 (oui
> Unknown)): Station requesting (re)association is not authenticated with
> responding station
> 04:32:56.703486 1280831275us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
> signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
> 04:32:56.719871 1280814892us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>
>
> I get this output during: iw dev wlan0 connect dlink
>
> ip link 6: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
> pfifo_fast state DOWN qlen 1000
> link/ether 00:22:b0:bc:1e:1e brd ff:ff:ff:ff:ff:ff
> 7: moni0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
> state UNKNOWN qlen 1000
> link/ieee802.11/radiotap 00:22:b0:bc:1e:1e brd ff:ff:ff:ff:ff:ff
> _______________________________________________________________________________________________________________
>
>
> And below its abgn mode
>
>
> 04:39:03.215511 1647283601us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:03.231910 1647299985us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:03.248287 1648332177us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:03.264676 1648348562us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:03.281062 1647349138us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:03.329450 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:03.423975 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:03.488971 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:03.520442 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:03.559646 1647627670us tsft 1.0 Mb/s 2432 MHz (0x00a0) -90dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:03.581465 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:03.625187 1647693206us tsft 1.0 Mb/s 2437 MHz (0x00a0) -82dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:03.642427 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:03.648832 1647815187us tsft 1.0 Mb/s 2437 MHz (0x00a0) -83dB
> signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
> 11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:03.657908 1647824279us tsft 1.0 Mb/s 2437 MHz (0x00a0) -84dB
> signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:03.690650 1647758743us tsft 1.0 Mb/s 2442 MHz (0x00a0) -50dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:03.707057 1647807897us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:03.717424 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:03.719941 1647820779us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
> signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
> 11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:03.723443 1647824280us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
> signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:03.739833 1647807897us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:03.772612 1648332184us tsft 1.0 Mb/s 2447 MHz (0x00a0) -58dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:03.777429 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:03.783900 1648343470us tsft 1.0 Mb/s 2447 MHz (0x00a0) -58dB
> signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
> 11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:03.788987 1648348569us tsft 1.0 Mb/s 2447 MHz (0x00a0) -57dB
> signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:03.805379 1647873432us tsft 1.0 Mb/s 2447 MHz (0x00a0) -57dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:03.852419 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:03.927414 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:03.987411 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:04.018806 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:04.021318 1648089364us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
> signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
> 11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:04.022226 1648090773us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
> Unknown)
> 04:39:04.022231 1.0 Mb/s [0x0000000f] Authentication (Open System)-1:
> Succesful
> 04:39:04.023758 1648091803us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
> signal antenna 1 [0x0000000e] Authentication (Open System)-2:
> 04:39:04.024889 1648093437us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
> Unknown)
> 04:39:04.024894 1.0 Mb/s [0x0000000f] Assoc Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:04.032157 1648329583us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
> signal antenna 1 [0x0000000e] Assoc Response AID(1) :: Succesful
> 04:39:04.036272 1648334194us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
> Unknown)
> 04:39:04.034786 1.0 Mb/s [0x0000000f] IP6 :: > ff02::16: HBH [|icmp6]
> 04:39:04.038359 1664884124us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] ESS CH: 7
> 04:39:04.039975 19463110us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.041164 19497067us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.042353 19498256us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.043514 19499418us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.044679 19500562us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.045818 19501707us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.047085 19502976us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.048320 19504219us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.049556 19505453us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.050822 19506723us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.055245 19511146us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:04.071647 19527530us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:04.088028 19511146us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:04.104423 19527531us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:04.120803 19642218us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:04.149433 2.0 Mb/s [0x0000000f]
> 04:39:04.503329 20942716us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:04.501812 1.0 Mb/s [0x0000000f] IP6 :: > ff02::1:ffbc:1e1e: ICMP6,
> neighbor solicitation[|icmp6]
> 04:39:04.504875 20943764us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.505994 20944884us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.507079 20945967us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.508261 20947150us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.509343 20948234us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.510507 20949390us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.511658 20950545us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.514056 20952943us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:04.515080 20953959us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.516211 20955088us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.517352 20956216us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:04.530479 20969322us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:04.546855 19969898us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:04.563212 19986282us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:04.579594 20035434us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:04.595989 20051818us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:04.617738 2.0 Mb/s [0x0000000f]
> 04:39:05.180352 20702195us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:05.178785 1.0 Mb/s [0x0000000f] IP6 :: > ff02::16: HBH [|icmp6]
> 04:39:05.181994 20703339us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.183200 20704546us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.184468 20705815us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.186864 20708209us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:05.187979 20611014us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.189232 20612266us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.190505 20613536us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.191708 20614725us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.192892 20615913us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.194097 20617129us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.195241 20618274us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.201228 20624259us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:05.218635 20641642us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:05.234997 20690795us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:05.251398 20707178us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:05.267772 20690794us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:05.293325 2.0 Mb/s [0x0000000f]
> 04:39:05.503289 20959543us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:05.501830 1.0 Mb/s [0x0000000f] IP6 fe80::222:b0ff:febc:1e1e >
> ff02::2: ICMP6, router solicitation, length 16
> 04:39:05.504794 20960537us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.505776 20961530us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.506800 20962550us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.507837 20963597us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.508945 20964706us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.509975 20965735us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.511021 20966781us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.512062 20967819us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.513989 20969748us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:05.514949 20970701us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.516020 20939007us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:05.529989 20952938us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:05.546372 20969321us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:05.562724 25147243us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:05.579128 25163626us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:05.595495 21018475us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:05.616362 2.0 Mb/s [0x0000000f]
> 04:39:07.850996 23307094us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:07.851002 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:07.852960 23276296us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:07.856162 23257963us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:07.873049 23328618us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:07.889438 23312234us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:07.905820 23328618us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:07.922235 23574408us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:07.938595 23590762us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:07.973338 1.0 Mb/s [0x0000000f]
> 04:39:09.503187 25155739us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:09.501785 1.0 Mb/s [0x0000000f] IP6 fe80::222:b0ff:febc:1e1e >
> ff02::2: ICMP6, router solicitation, length 16
> 04:39:09.504722 25156777us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:09.505758 25157815us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:09.506842 25158898us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:09.507881 25159936us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:09.508920 25160974us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:09.510010 25162065us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:09.511938 25163994us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:09.513011 25165046us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:09.514026 24936681us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:09.515106 24937763us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:09.516121 24938756us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:09.527980 24950634us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:09.544364 24967018us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:09.560749 25016169us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:09.577142 25032554us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:09.593528 25016171us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:09.617753 2.0 Mb/s [0x0000000f]
> 04:39:11.851048 29338413us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:11.851055 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:11.852960 29307561us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:11.855235 27256681us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:11.870110 29356933us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:11.887497 27309932us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:11.903868 27326314us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:11.920265 27375466us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:11.936639 27391851us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:11.952861 27375466us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:11.971207 1.0 Mb/s [0x0000000f]
> 04:39:13.504558 28960148us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:13.502293 1.0 Mb/s [0x0000000f] IP6 fe80::222:b0ff:febc:1e1e >
> ff02::2: ICMP6, router solicitation, length 16
> 04:39:13.506118 28961214us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:13.507224 28962323us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:13.509637 28964736us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:13.510593 28965670us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:13.511713 28934021us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:13.512715 28935023us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:13.513833 28936142us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:13.514821 28937126us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:13.515815 28938119us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:13.516884 28939193us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:13.517967 28940276us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] [|ip6]
> 04:39:13.526024 28948330us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:13.542409 28964715us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:13.558797 29079402us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:13.575179 29095786us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:13.592599 29014890us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:13.616633 2.0 Mb/s [0x0000000f]
> 04:39:15.851129 31306506us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:15.851137 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:15.853789 31308681us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:15.855134 31277734us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:15.868664 31302506us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:15.885543 31307627us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:15.901914 31324010us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:15.918297 31438698us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:15.935706 31456106us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:15.951069 31373162us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:15.973863 1.0 Mb/s [0x0000000f]
> 04:39:18.851959 34274337us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:18.851966 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:18.853870 34276254us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:18.867171 34268010us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:18.884061 34338665us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:18.900444 34322282us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:18.916851 34338667us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:18.933215 34584426us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:18.949602 34600811us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:18.971559 1.0 Mb/s [0x0000000f]
> 04:39:21.850505 37272635us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:21.850512 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:21.852488 37733358us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:21.865707 37266282us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:21.882615 37336938us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:21.898999 37353322us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:21.916409 37337962us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:21.931750 37353323us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:21.948157 37468010us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:21.973422 1.0 Mb/s [0x0000000f]
> 04:39:24.851008 40272861us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:24.851015 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:24.852900 40340295us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:24.864263 40264554us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:24.881148 40302443us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:24.897512 40351594us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:24.914234 40368292us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:24.930305 40351596us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:24.946690 40367978us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:24.971469 1.0 Mb/s [0x0000000f]
> 04:39:27.850941 43501912us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:27.850948 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:27.852906 43471112us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:27.862778 43492203us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:27.879699 43300745us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:27.896045 43317098us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:27.912467 43366281us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:27.928816 43382635us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:27.945207 43366251us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:27.971128 1.0 Mb/s [0x0000000f]
> 04:39:30.850892 46370527us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:30.850898 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:30.852744 46339611us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:30.861308 46261099us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:30.878209 46397290us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:30.894579 46315371us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:30.910979 46331754us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:30.927350 46380906us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:30.943793 46397322us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:30.970464 1.0 Mb/s [0x0000000f]
> 04:39:33.851022 49272091us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:33.851028 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:33.852960 49274033us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:33.859841 49259370us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:33.876784 50313095us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:33.893115 50329450us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:33.909905 49330410us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:33.925905 49346409us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:33.942290 49395562us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:33.971973 1.0 Mb/s [0x0000000f]
> 04:39:36.850798 52271601us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:36.850804 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:36.852688 52273499us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:36.858376 52257642us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:36.875283 52295530us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:36.891668 52410218us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:36.908059 52426603us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:36.924439 52344682us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:36.940827 52361066us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:36.973980 1.0 Mb/s [0x0000000f]
> 04:39:39.851659 55304972us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:39.851665 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:39.853617 55306934us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:39.856908 55288682us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:39.873822 55293802us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:39.890203 55310187us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:39.906567 55555946us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:39.922974 55572330us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:39.939360 55359339us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:39.974783 1.0 Mb/s [0x0000000f]
> 04:39:42.850849 58303900us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:42.850855 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:42.852791 58273074us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:42.855442 58254186us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:42.872351 58324842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:42.888738 58308458us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:42.905101 58324842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:42.921506 58439531us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:42.937892 58455914us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:42.972432 1.0 Mb/s [0x0000000f]
> 04:39:45.851788 61271803us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:45.851794 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:45.854477 61274003us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:45.855829 61275814us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:45.870361 61268842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:45.887248 61339498us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:45.903634 61323115us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:45.920019 61339497us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:45.936404 61847402us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:45.952795 61863786us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:45.972991 1.0 Mb/s [0x0000000f]
> 04:39:48.851057 64270817us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:48.851063 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:48.853446 64272708us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:48.854905 64471237us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:48.868913 64267114us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:48.885812 64337770us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:48.902180 64354154us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:48.918568 64337770us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:48.934949 64354154us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:48.951336 64468842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:48.972129 1.0 Mb/s [0x0000000f]
> 04:39:51.850068 67367868us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:51.850074 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:51.852571 67369874us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:51.853922 67338918us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:51.867428 67265386us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:51.884315 67303274us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:51.900732 67352456us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:51.917115 67368839us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:51.933473 67352425us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:51.949858 67368810us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:51.972299 1.0 Mb/s [0x0000000f]
> 04:39:54.850778 71285815us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
> 04:39:54.850785 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
> 11.0 6.0 9.0 12.0 18.0 Mbit]
> 04:39:54.852636 71254909us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
> 9.0 12.0 18.0 Mbit] CH: 7
> 04:39:54.865964 71279467us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:54.882881 70301577us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:54.899295 70317974us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:54.915634 70367083us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:54.932025 70383466us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:54.948410 70367083us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
> 18.0 Mbit] ESS CH: 7
> 04:39:54.971519 1.0 Mb/s [0x0000000f]
>
>
> Should i bother put output into separate attachments?
Yes, please give us the log of 'iw event -t' for both cases.
Luis
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-08-05 15:34 ` Luis R. Rodriguez
@ 2009-08-05 15:54 ` Dmitri Seletski
2009-08-05 16:34 ` Dmitri Seletski
0 siblings, 1 reply; 39+ messages in thread
From: Dmitri Seletski @ 2009-08-05 15:54 UTC (permalink / raw)
To: ath9k-devel
Luis R. Rodriguez wrote:
> On Tue, Aug 04, 2009 at 08:43:34PM -0700, Dmitri Seletski wrote:
>
>> Hi guys.
>>
>> Below part of output of tcpdump(sorry, wireshark seem to be confusing,
>> hope you don't mind)
>> This is pure Nmode on access point:
>> 3 first lines a to are typical and are 99% of all output
>>
>> 04:32:56.453590 1280548648us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.469976 1280565032us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.486363 1280810792us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.488773 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:32:56.491313 1280815742us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>> signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
>> 11.0* 6.0* 9.0 12.0* 18.0 Mbit] CH: 7
>> 04:32:56.492189 1280817114us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
>> Unknown)
>> 04:32:56.492194 1.0 Mb/s [0x0000000f] Authentication (Open System)-1:
>> Succesful
>> 04:32:56.493730 1280818160us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>> signal antenna 1 [0x0000000e] Authentication (Open System)-2:
>> 04:32:56.494782 1280819702us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
>> Unknown)
>> 04:32:56.494786 1.0 Mb/s [0x0000000f] Assoc Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:32:56.502748 1280827177us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.519151 1280614185us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.535535 1280630569us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.551954 1280679753us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.568305 1280696106us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.584690 1280679722us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.601107 1280696136us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.617693 1280811023us tsft 1.0 Mb/s 2442 MHz (0x00a0) -48dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.633918 1280827243us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.650241 1280745259us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.666623 1280761643us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.683039 1280810827us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.694840 1280823128us tsft 1.0 Mb/s 2442 MHz (0x00a0) -48dB
>> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
>> Unknown)
>> 04:32:56.694847 1.0 Mb/s [0x0000000f] Assoc Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:32:56.700578 1280828368us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>> signal antenna 1 [0x0000000e] DeAuthentication (00:1e:58:b4:f6:83 (oui
>> Unknown)): Station requesting (re)association is not authenticated with
>> responding station
>> 04:32:56.703486 1280831275us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>> signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>> 04:32:56.719871 1280814892us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>
>>
>> I get this output during: iw dev wlan0 connect dlink
>>
>> ip link 6: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
>> pfifo_fast state DOWN qlen 1000
>> link/ether 00:22:b0:bc:1e:1e brd ff:ff:ff:ff:ff:ff
>> 7: moni0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
>> state UNKNOWN qlen 1000
>> link/ieee802.11/radiotap 00:22:b0:bc:1e:1e brd ff:ff:ff:ff:ff:ff
>> _______________________________________________________________________________________________________________
>>
>>
>> And below its abgn mode
>>
>>
>> 04:39:03.215511 1647283601us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:03.231910 1647299985us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:03.248287 1648332177us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:03.264676 1648348562us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:03.281062 1647349138us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:03.329450 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:03.423975 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:03.488971 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:03.520442 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:03.559646 1647627670us tsft 1.0 Mb/s 2432 MHz (0x00a0) -90dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:03.581465 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:03.625187 1647693206us tsft 1.0 Mb/s 2437 MHz (0x00a0) -82dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:03.642427 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:03.648832 1647815187us tsft 1.0 Mb/s 2437 MHz (0x00a0) -83dB
>> signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
>> 11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:03.657908 1647824279us tsft 1.0 Mb/s 2437 MHz (0x00a0) -84dB
>> signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:03.690650 1647758743us tsft 1.0 Mb/s 2442 MHz (0x00a0) -50dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:03.707057 1647807897us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:03.717424 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:03.719941 1647820779us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>> signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
>> 11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:03.723443 1647824280us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>> signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:03.739833 1647807897us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:03.772612 1648332184us tsft 1.0 Mb/s 2447 MHz (0x00a0) -58dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:03.777429 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:03.783900 1648343470us tsft 1.0 Mb/s 2447 MHz (0x00a0) -58dB
>> signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
>> 11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:03.788987 1648348569us tsft 1.0 Mb/s 2447 MHz (0x00a0) -57dB
>> signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:03.805379 1647873432us tsft 1.0 Mb/s 2447 MHz (0x00a0) -57dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:03.852419 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:03.927414 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:03.987411 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:04.018806 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:04.021318 1648089364us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>> signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
>> 11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:04.022226 1648090773us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
>> Unknown)
>> 04:39:04.022231 1.0 Mb/s [0x0000000f] Authentication (Open System)-1:
>> Succesful
>> 04:39:04.023758 1648091803us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>> signal antenna 1 [0x0000000e] Authentication (Open System)-2:
>> 04:39:04.024889 1648093437us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
>> Unknown)
>> 04:39:04.024894 1.0 Mb/s [0x0000000f] Assoc Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:04.032157 1648329583us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>> signal antenna 1 [0x0000000e] Assoc Response AID(1) :: Succesful
>> 04:39:04.036272 1648334194us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
>> Unknown)
>> 04:39:04.034786 1.0 Mb/s [0x0000000f] IP6 :: > ff02::16: HBH [|icmp6]
>> 04:39:04.038359 1664884124us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>> 04:39:04.039975 19463110us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.041164 19497067us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.042353 19498256us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.043514 19499418us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.044679 19500562us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.045818 19501707us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.047085 19502976us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.048320 19504219us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.049556 19505453us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.050822 19506723us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.055245 19511146us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:04.071647 19527530us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:04.088028 19511146us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:04.104423 19527531us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:04.120803 19642218us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:04.149433 2.0 Mb/s [0x0000000f]
>> 04:39:04.503329 20942716us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:04.501812 1.0 Mb/s [0x0000000f] IP6 :: > ff02::1:ffbc:1e1e: ICMP6,
>> neighbor solicitation[|icmp6]
>> 04:39:04.504875 20943764us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.505994 20944884us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.507079 20945967us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.508261 20947150us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.509343 20948234us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.510507 20949390us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.511658 20950545us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.514056 20952943us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:04.515080 20953959us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.516211 20955088us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.517352 20956216us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:04.530479 20969322us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:04.546855 19969898us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:04.563212 19986282us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:04.579594 20035434us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:04.595989 20051818us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:04.617738 2.0 Mb/s [0x0000000f]
>> 04:39:05.180352 20702195us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:05.178785 1.0 Mb/s [0x0000000f] IP6 :: > ff02::16: HBH [|icmp6]
>> 04:39:05.181994 20703339us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.183200 20704546us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.184468 20705815us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.186864 20708209us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:05.187979 20611014us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.189232 20612266us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.190505 20613536us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.191708 20614725us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.192892 20615913us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.194097 20617129us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.195241 20618274us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.201228 20624259us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:05.218635 20641642us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:05.234997 20690795us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:05.251398 20707178us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:05.267772 20690794us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:05.293325 2.0 Mb/s [0x0000000f]
>> 04:39:05.503289 20959543us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:05.501830 1.0 Mb/s [0x0000000f] IP6 fe80::222:b0ff:febc:1e1e >
>> ff02::2: ICMP6, router solicitation, length 16
>> 04:39:05.504794 20960537us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.505776 20961530us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.506800 20962550us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.507837 20963597us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.508945 20964706us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.509975 20965735us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.511021 20966781us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.512062 20967819us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.513989 20969748us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:05.514949 20970701us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.516020 20939007us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:05.529989 20952938us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:05.546372 20969321us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:05.562724 25147243us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:05.579128 25163626us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:05.595495 21018475us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:05.616362 2.0 Mb/s [0x0000000f]
>> 04:39:07.850996 23307094us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:07.851002 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:07.852960 23276296us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:07.856162 23257963us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:07.873049 23328618us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:07.889438 23312234us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:07.905820 23328618us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:07.922235 23574408us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:07.938595 23590762us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:07.973338 1.0 Mb/s [0x0000000f]
>> 04:39:09.503187 25155739us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:09.501785 1.0 Mb/s [0x0000000f] IP6 fe80::222:b0ff:febc:1e1e >
>> ff02::2: ICMP6, router solicitation, length 16
>> 04:39:09.504722 25156777us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:09.505758 25157815us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:09.506842 25158898us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:09.507881 25159936us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:09.508920 25160974us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:09.510010 25162065us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:09.511938 25163994us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:09.513011 25165046us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:09.514026 24936681us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:09.515106 24937763us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:09.516121 24938756us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:09.527980 24950634us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:09.544364 24967018us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:09.560749 25016169us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:09.577142 25032554us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:09.593528 25016171us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:09.617753 2.0 Mb/s [0x0000000f]
>> 04:39:11.851048 29338413us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:11.851055 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:11.852960 29307561us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:11.855235 27256681us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:11.870110 29356933us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:11.887497 27309932us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:11.903868 27326314us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:11.920265 27375466us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:11.936639 27391851us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:11.952861 27375466us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:11.971207 1.0 Mb/s [0x0000000f]
>> 04:39:13.504558 28960148us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:13.502293 1.0 Mb/s [0x0000000f] IP6 fe80::222:b0ff:febc:1e1e >
>> ff02::2: ICMP6, router solicitation, length 16
>> 04:39:13.506118 28961214us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:13.507224 28962323us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:13.509637 28964736us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:13.510593 28965670us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:13.511713 28934021us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:13.512715 28935023us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:13.513833 28936142us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:13.514821 28937126us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:13.515815 28938119us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:13.516884 28939193us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:13.517967 28940276us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] [|ip6]
>> 04:39:13.526024 28948330us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:13.542409 28964715us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:13.558797 29079402us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:13.575179 29095786us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:13.592599 29014890us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:13.616633 2.0 Mb/s [0x0000000f]
>> 04:39:15.851129 31306506us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:15.851137 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:15.853789 31308681us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:15.855134 31277734us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:15.868664 31302506us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:15.885543 31307627us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:15.901914 31324010us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:15.918297 31438698us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:15.935706 31456106us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:15.951069 31373162us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:15.973863 1.0 Mb/s [0x0000000f]
>> 04:39:18.851959 34274337us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:18.851966 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:18.853870 34276254us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:18.867171 34268010us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:18.884061 34338665us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:18.900444 34322282us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:18.916851 34338667us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:18.933215 34584426us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:18.949602 34600811us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:18.971559 1.0 Mb/s [0x0000000f]
>> 04:39:21.850505 37272635us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:21.850512 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:21.852488 37733358us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:21.865707 37266282us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:21.882615 37336938us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:21.898999 37353322us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:21.916409 37337962us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:21.931750 37353323us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:21.948157 37468010us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:21.973422 1.0 Mb/s [0x0000000f]
>> 04:39:24.851008 40272861us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:24.851015 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:24.852900 40340295us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:24.864263 40264554us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:24.881148 40302443us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:24.897512 40351594us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:24.914234 40368292us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:24.930305 40351596us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:24.946690 40367978us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:24.971469 1.0 Mb/s [0x0000000f]
>> 04:39:27.850941 43501912us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:27.850948 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:27.852906 43471112us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:27.862778 43492203us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:27.879699 43300745us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:27.896045 43317098us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:27.912467 43366281us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:27.928816 43382635us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:27.945207 43366251us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:27.971128 1.0 Mb/s [0x0000000f]
>> 04:39:30.850892 46370527us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:30.850898 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:30.852744 46339611us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:30.861308 46261099us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:30.878209 46397290us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:30.894579 46315371us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:30.910979 46331754us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:30.927350 46380906us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:30.943793 46397322us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:30.970464 1.0 Mb/s [0x0000000f]
>> 04:39:33.851022 49272091us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:33.851028 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:33.852960 49274033us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:33.859841 49259370us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:33.876784 50313095us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:33.893115 50329450us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:33.909905 49330410us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:33.925905 49346409us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:33.942290 49395562us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:33.971973 1.0 Mb/s [0x0000000f]
>> 04:39:36.850798 52271601us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:36.850804 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:36.852688 52273499us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:36.858376 52257642us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:36.875283 52295530us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:36.891668 52410218us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:36.908059 52426603us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:36.924439 52344682us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:36.940827 52361066us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:36.973980 1.0 Mb/s [0x0000000f]
>> 04:39:39.851659 55304972us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:39.851665 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:39.853617 55306934us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:39.856908 55288682us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:39.873822 55293802us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:39.890203 55310187us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:39.906567 55555946us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:39.922974 55572330us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:39.939360 55359339us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:39.974783 1.0 Mb/s [0x0000000f]
>> 04:39:42.850849 58303900us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:42.850855 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:42.852791 58273074us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:42.855442 58254186us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:42.872351 58324842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:42.888738 58308458us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:42.905101 58324842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:42.921506 58439531us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:42.937892 58455914us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:42.972432 1.0 Mb/s [0x0000000f]
>> 04:39:45.851788 61271803us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:45.851794 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:45.854477 61274003us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:45.855829 61275814us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:45.870361 61268842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:45.887248 61339498us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:45.903634 61323115us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:45.920019 61339497us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:45.936404 61847402us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:45.952795 61863786us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:45.972991 1.0 Mb/s [0x0000000f]
>> 04:39:48.851057 64270817us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:48.851063 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:48.853446 64272708us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:48.854905 64471237us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:48.868913 64267114us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:48.885812 64337770us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:48.902180 64354154us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:48.918568 64337770us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:48.934949 64354154us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:48.951336 64468842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:48.972129 1.0 Mb/s [0x0000000f]
>> 04:39:51.850068 67367868us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:51.850074 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:51.852571 67369874us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:51.853922 67338918us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:51.867428 67265386us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:51.884315 67303274us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:51.900732 67352456us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:51.917115 67368839us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:51.933473 67352425us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:51.949858 67368810us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:51.972299 1.0 Mb/s [0x0000000f]
>> 04:39:54.850778 71285815us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>> 04:39:54.850785 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>> 04:39:54.852636 71254909us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>> 9.0 12.0 18.0 Mbit] CH: 7
>> 04:39:54.865964 71279467us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:54.882881 70301577us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:54.899295 70317974us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:54.915634 70367083us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:54.932025 70383466us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:54.948410 70367083us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>> 18.0 Mbit] ESS CH: 7
>> 04:39:54.971519 1.0 Mb/s [0x0000000f]
>>
>>
>> Should i bother put output into separate attachments?
>>
>
> Yes, please give us the log of 'iw event -t' for both cases.
>
> Luis
>
Hi guys.
iw event -t
(bgn mode)
1249486503.530998: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
00:1e:58:b4:f6:83 reason 3: Deauthenticated because sending station is
leaving (or has left) the IBSS or ESS
1249486503.531247: wlan0 (phy #0): disconnected (local request)
(Note by Dmitri:disconnecting and connecting)
1249486505.817962: wlan0 (phy #0): auth 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e status: 0: Successful
1249486505.826357: wlan0 (phy #0): assoc 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e status: 0: Successful
1249486505.826408: wlan0 (phy #0): connected to 00:1e:58:b4:f6:83
(switching to N mode from web interface)
1249486651.878584: wlan0 (phy #0): deauth 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e reason 6: Class 2 frame received from
non-authenticated station
1249486651.878667: wlan0 (phy #0): disconnected (by AP) reason: 6: Class
2 frame received from non-authenticated station
(note: connecting back)
1249486685.213545: wlan0 (phy #0): auth 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e status: 0: Successful
1249486685.419764: wlan0 (phy #0): deauth 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e reason 9: Station requesting (re)association is not
authenticated with responding station
1249486685.419808: wlan0 (phy #0): failed to connect to
00:1e:58:b4:f6:83, status: 1: Unspecified failure
Regards
Dmitri
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-08-05 15:54 ` Dmitri Seletski
@ 2009-08-05 16:34 ` Dmitri Seletski
2009-08-05 17:11 ` Luis R. Rodriguez
0 siblings, 1 reply; 39+ messages in thread
From: Dmitri Seletski @ 2009-08-05 16:34 UTC (permalink / raw)
To: ath9k-devel
Dmitri Seletski wrote:
> Luis R. Rodriguez wrote:
>
>> On Tue, Aug 04, 2009 at 08:43:34PM -0700, Dmitri Seletski wrote:
>>
>>
>>> Hi guys.
>>>
>>> Below part of output of tcpdump(sorry, wireshark seem to be confusing,
>>> hope you don't mind)
>>> This is pure Nmode on access point:
>>> 3 first lines a to are typical and are 99% of all output
>>>
>>> 04:32:56.453590 1280548648us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.469976 1280565032us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.486363 1280810792us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.488773 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:32:56.491313 1280815742us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>>> signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
>>> 11.0* 6.0* 9.0 12.0* 18.0 Mbit] CH: 7
>>> 04:32:56.492189 1280817114us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>>> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
>>> Unknown)
>>> 04:32:56.492194 1.0 Mb/s [0x0000000f] Authentication (Open System)-1:
>>> Succesful
>>> 04:32:56.493730 1280818160us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>>> signal antenna 1 [0x0000000e] Authentication (Open System)-2:
>>> 04:32:56.494782 1280819702us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>>> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
>>> Unknown)
>>> 04:32:56.494786 1.0 Mb/s [0x0000000f] Assoc Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:32:56.502748 1280827177us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.519151 1280614185us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.535535 1280630569us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.551954 1280679753us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.568305 1280696106us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.584690 1280679722us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.601107 1280696136us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.617693 1280811023us tsft 1.0 Mb/s 2442 MHz (0x00a0) -48dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.633918 1280827243us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.650241 1280745259us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.666623 1280761643us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.683039 1280810827us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.694840 1280823128us tsft 1.0 Mb/s 2442 MHz (0x00a0) -48dB
>>> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
>>> Unknown)
>>> 04:32:56.694847 1.0 Mb/s [0x0000000f] Assoc Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:32:56.700578 1280828368us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>>> signal antenna 1 [0x0000000e] DeAuthentication (00:1e:58:b4:f6:83 (oui
>>> Unknown)): Station requesting (re)association is not authenticated with
>>> responding station
>>> 04:32:56.703486 1280831275us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>>> signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>> 04:32:56.719871 1280814892us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0*
>>> 9.0 12.0* 18.0 Mbit] ESS CH: 7
>>>
>>>
>>> I get this output during: iw dev wlan0 connect dlink
>>>
>>> ip link 6: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
>>> pfifo_fast state DOWN qlen 1000
>>> link/ether 00:22:b0:bc:1e:1e brd ff:ff:ff:ff:ff:ff
>>> 7: moni0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
>>> state UNKNOWN qlen 1000
>>> link/ieee802.11/radiotap 00:22:b0:bc:1e:1e brd ff:ff:ff:ff:ff:ff
>>> _______________________________________________________________________________________________________________
>>>
>>>
>>> And below its abgn mode
>>>
>>>
>>> 04:39:03.215511 1647283601us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:03.231910 1647299985us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:03.248287 1648332177us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:03.264676 1648348562us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:03.281062 1647349138us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:03.329450 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:03.423975 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:03.488971 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:03.520442 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:03.559646 1647627670us tsft 1.0 Mb/s 2432 MHz (0x00a0) -90dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:03.581465 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:03.625187 1647693206us tsft 1.0 Mb/s 2437 MHz (0x00a0) -82dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:03.642427 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:03.648832 1647815187us tsft 1.0 Mb/s 2437 MHz (0x00a0) -83dB
>>> signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
>>> 11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:03.657908 1647824279us tsft 1.0 Mb/s 2437 MHz (0x00a0) -84dB
>>> signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:03.690650 1647758743us tsft 1.0 Mb/s 2442 MHz (0x00a0) -50dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:03.707057 1647807897us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:03.717424 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:03.719941 1647820779us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>>> signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
>>> 11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:03.723443 1647824280us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB
>>> signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:03.739833 1647807897us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:03.772612 1648332184us tsft 1.0 Mb/s 2447 MHz (0x00a0) -58dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:03.777429 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:03.783900 1648343470us tsft 1.0 Mb/s 2447 MHz (0x00a0) -58dB
>>> signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
>>> 11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:03.788987 1648348569us tsft 1.0 Mb/s 2447 MHz (0x00a0) -57dB
>>> signal antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:03.805379 1647873432us tsft 1.0 Mb/s 2447 MHz (0x00a0) -57dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:03.852419 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:03.927414 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:03.987411 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:04.018806 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:04.021318 1648089364us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>>> signal antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5*
>>> 11.0* 6.0 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:04.022226 1648090773us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>>> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
>>> Unknown)
>>> 04:39:04.022231 1.0 Mb/s [0x0000000f] Authentication (Open System)-1:
>>> Succesful
>>> 04:39:04.023758 1648091803us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>>> signal antenna 1 [0x0000000e] Authentication (Open System)-2:
>>> 04:39:04.024889 1648093437us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>>> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
>>> Unknown)
>>> 04:39:04.024894 1.0 Mb/s [0x0000000f] Assoc Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:04.032157 1648329583us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB
>>> signal antenna 1 [0x0000000e] Assoc Response AID(1) :: Succesful
>>> 04:39:04.036272 1648334194us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>>> signal antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui
>>> Unknown)
>>> 04:39:04.034786 1.0 Mb/s [0x0000000f] IP6 :: > ff02::16: HBH [|icmp6]
>>> 04:39:04.038359 1664884124us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB
>>> signal antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] ESS CH: 7
>>> 04:39:04.039975 19463110us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.041164 19497067us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.042353 19498256us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.043514 19499418us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.044679 19500562us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.045818 19501707us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.047085 19502976us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.048320 19504219us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.049556 19505453us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.050822 19506723us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.055245 19511146us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:04.071647 19527530us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:04.088028 19511146us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:04.104423 19527531us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:04.120803 19642218us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:04.149433 2.0 Mb/s [0x0000000f]
>>> 04:39:04.503329 20942716us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:04.501812 1.0 Mb/s [0x0000000f] IP6 :: > ff02::1:ffbc:1e1e: ICMP6,
>>> neighbor solicitation[|icmp6]
>>> 04:39:04.504875 20943764us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.505994 20944884us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.507079 20945967us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.508261 20947150us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.509343 20948234us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.510507 20949390us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.511658 20950545us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.514056 20952943us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:04.515080 20953959us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.516211 20955088us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.517352 20956216us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:04.530479 20969322us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:04.546855 19969898us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:04.563212 19986282us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:04.579594 20035434us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:04.595989 20051818us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:04.617738 2.0 Mb/s [0x0000000f]
>>> 04:39:05.180352 20702195us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:05.178785 1.0 Mb/s [0x0000000f] IP6 :: > ff02::16: HBH [|icmp6]
>>> 04:39:05.181994 20703339us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.183200 20704546us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.184468 20705815us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.186864 20708209us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:05.187979 20611014us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.189232 20612266us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.190505 20613536us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.191708 20614725us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.192892 20615913us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.194097 20617129us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.195241 20618274us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.201228 20624259us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:05.218635 20641642us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:05.234997 20690795us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:05.251398 20707178us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:05.267772 20690794us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:05.293325 2.0 Mb/s [0x0000000f]
>>> 04:39:05.503289 20959543us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:05.501830 1.0 Mb/s [0x0000000f] IP6 fe80::222:b0ff:febc:1e1e >
>>> ff02::2: ICMP6, router solicitation, length 16
>>> 04:39:05.504794 20960537us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.505776 20961530us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.506800 20962550us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.507837 20963597us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.508945 20964706us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.509975 20965735us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.511021 20966781us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.512062 20967819us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.513989 20969748us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:05.514949 20970701us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.516020 20939007us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:05.529989 20952938us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:05.546372 20969321us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:05.562724 25147243us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:05.579128 25163626us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:05.595495 21018475us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:05.616362 2.0 Mb/s [0x0000000f]
>>> 04:39:07.850996 23307094us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:07.851002 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:07.852960 23276296us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:07.856162 23257963us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:07.873049 23328618us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:07.889438 23312234us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:07.905820 23328618us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:07.922235 23574408us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:07.938595 23590762us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:07.973338 1.0 Mb/s [0x0000000f]
>>> 04:39:09.503187 25155739us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:09.501785 1.0 Mb/s [0x0000000f] IP6 fe80::222:b0ff:febc:1e1e >
>>> ff02::2: ICMP6, router solicitation, length 16
>>> 04:39:09.504722 25156777us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:09.505758 25157815us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:09.506842 25158898us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:09.507881 25159936us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:09.508920 25160974us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:09.510010 25162065us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:09.511938 25163994us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:09.513011 25165046us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:09.514026 24936681us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:09.515106 24937763us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:09.516121 24938756us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:09.527980 24950634us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:09.544364 24967018us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:09.560749 25016169us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:09.577142 25032554us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:09.593528 25016171us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:09.617753 2.0 Mb/s [0x0000000f]
>>> 04:39:11.851048 29338413us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:11.851055 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:11.852960 29307561us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:11.855235 27256681us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:11.870110 29356933us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:11.887497 27309932us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:11.903868 27326314us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:11.920265 27375466us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:11.936639 27391851us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:11.952861 27375466us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:11.971207 1.0 Mb/s [0x0000000f]
>>> 04:39:13.504558 28960148us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:13.502293 1.0 Mb/s [0x0000000f] IP6 fe80::222:b0ff:febc:1e1e >
>>> ff02::2: ICMP6, router solicitation, length 16
>>> 04:39:13.506118 28961214us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:13.507224 28962323us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:13.509637 28964736us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:13.510593 28965670us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:13.511713 28934021us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:13.512715 28935023us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:13.513833 28936142us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:13.514821 28937126us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:13.515815 28938119us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:13.516884 28939193us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:13.517967 28940276us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] [|ip6]
>>> 04:39:13.526024 28948330us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:13.542409 28964715us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:13.558797 29079402us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:13.575179 29095786us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:13.592599 29014890us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:13.616633 2.0 Mb/s [0x0000000f]
>>> 04:39:15.851129 31306506us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:15.851137 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:15.853789 31308681us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:15.855134 31277734us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:15.868664 31302506us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:15.885543 31307627us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:15.901914 31324010us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:15.918297 31438698us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:15.935706 31456106us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:15.951069 31373162us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:15.973863 1.0 Mb/s [0x0000000f]
>>> 04:39:18.851959 34274337us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:18.851966 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:18.853870 34276254us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:18.867171 34268010us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:18.884061 34338665us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:18.900444 34322282us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:18.916851 34338667us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:18.933215 34584426us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:18.949602 34600811us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:18.971559 1.0 Mb/s [0x0000000f]
>>> 04:39:21.850505 37272635us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:21.850512 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:21.852488 37733358us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:21.865707 37266282us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:21.882615 37336938us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:21.898999 37353322us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:21.916409 37337962us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:21.931750 37353323us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:21.948157 37468010us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:21.973422 1.0 Mb/s [0x0000000f]
>>> 04:39:24.851008 40272861us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:24.851015 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:24.852900 40340295us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:24.864263 40264554us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:24.881148 40302443us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:24.897512 40351594us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:24.914234 40368292us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:24.930305 40351596us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:24.946690 40367978us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:24.971469 1.0 Mb/s [0x0000000f]
>>> 04:39:27.850941 43501912us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:27.850948 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:27.852906 43471112us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:27.862778 43492203us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:27.879699 43300745us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:27.896045 43317098us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:27.912467 43366281us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:27.928816 43382635us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:27.945207 43366251us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:27.971128 1.0 Mb/s [0x0000000f]
>>> 04:39:30.850892 46370527us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:30.850898 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:30.852744 46339611us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:30.861308 46261099us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:30.878209 46397290us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:30.894579 46315371us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:30.910979 46331754us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:30.927350 46380906us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:30.943793 46397322us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:30.970464 1.0 Mb/s [0x0000000f]
>>> 04:39:33.851022 49272091us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:33.851028 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:33.852960 49274033us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:33.859841 49259370us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:33.876784 50313095us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:33.893115 50329450us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:33.909905 49330410us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:33.925905 49346409us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:33.942290 49395562us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:33.971973 1.0 Mb/s [0x0000000f]
>>> 04:39:36.850798 52271601us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:36.850804 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:36.852688 52273499us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:36.858376 52257642us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:36.875283 52295530us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:36.891668 52410218us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:36.908059 52426603us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:36.924439 52344682us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:36.940827 52361066us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:36.973980 1.0 Mb/s [0x0000000f]
>>> 04:39:39.851659 55304972us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:39.851665 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:39.853617 55306934us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:39.856908 55288682us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:39.873822 55293802us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:39.890203 55310187us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:39.906567 55555946us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:39.922974 55572330us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:39.939360 55359339us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:39.974783 1.0 Mb/s [0x0000000f]
>>> 04:39:42.850849 58303900us tsft 1.0 Mb/s 2442 MHz (0x00a0) -45dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:42.850855 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:42.852791 58273074us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:42.855442 58254186us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:42.872351 58324842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:42.888738 58308458us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:42.905101 58324842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:42.921506 58439531us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:42.937892 58455914us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:42.972432 1.0 Mb/s [0x0000000f]
>>> 04:39:45.851788 61271803us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:45.851794 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:45.854477 61274003us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:45.855829 61275814us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:45.870361 61268842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:45.887248 61339498us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:45.903634 61323115us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:45.920019 61339497us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:45.936404 61847402us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:45.952795 61863786us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:45.972991 1.0 Mb/s [0x0000000f]
>>> 04:39:48.851057 64270817us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:48.851063 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:48.853446 64272708us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:48.854905 64471237us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:48.868913 64267114us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:48.885812 64337770us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:48.902180 64354154us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:48.918568 64337770us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:48.934949 64354154us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:48.951336 64468842us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:48.972129 1.0 Mb/s [0x0000000f]
>>> 04:39:51.850068 67367868us tsft 1.0 Mb/s 2442 MHz (0x00a0) -47dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:51.850074 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:51.852571 67369874us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:51.853922 67338918us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:51.867428 67265386us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:51.884315 67303274us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:51.900732 67352456us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:51.917115 67368839us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:51.933473 67352425us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:51.949858 67368810us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:51.972299 1.0 Mb/s [0x0000000f]
>>> 04:39:54.850778 71285815us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Acknowledgment RA:00:22:b0:bc:1e:1e (oui Unknown)
>>> 04:39:54.850785 1.0 Mb/s [0x0000000f] Probe Request (dlink) [1.0 2.0 5.5
>>> 11.0 6.0 9.0 12.0 18.0 Mbit]
>>> 04:39:54.852636 71254909us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Probe Response (dlink) [1.0* 2.0* 5.5* 11.0* 6.0
>>> 9.0 12.0 18.0 Mbit] CH: 7
>>> 04:39:54.865964 71279467us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 0 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:54.882881 70301577us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:54.899295 70317974us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:54.915634 70367083us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:54.932025 70383466us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:54.948410 70367083us tsft 1.0 Mb/s 2442 MHz (0x00a0) -46dB signal
>>> antenna 1 [0x0000000e] Beacon (dlink) [1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0
>>> 18.0 Mbit] ESS CH: 7
>>> 04:39:54.971519 1.0 Mb/s [0x0000000f]
>>>
>>>
>>> Should i bother put output into separate attachments?
>>>
>>>
>> Yes, please give us the log of 'iw event -t' for both cases.
>>
>> Luis
>>
>>
> Hi guys.
>
> iw event -t
> (bgn mode)
>
> 1249486503.530998: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
> 00:1e:58:b4:f6:83 reason 3: Deauthenticated because sending station is
> leaving (or has left) the IBSS or ESS
> 1249486503.531247: wlan0 (phy #0): disconnected (local request)
>
> (Note by Dmitri:disconnecting and connecting)
>
> 1249486505.817962: wlan0 (phy #0): auth 00:1e:58:b4:f6:83 ->
> 00:22:b0:bc:1e:1e status: 0: Successful
> 1249486505.826357: wlan0 (phy #0): assoc 00:1e:58:b4:f6:83 ->
> 00:22:b0:bc:1e:1e status: 0: Successful
> 1249486505.826408: wlan0 (phy #0): connected to 00:1e:58:b4:f6:83
>
>
> (switching to N mode from web interface)
> 1249486651.878584: wlan0 (phy #0): deauth 00:1e:58:b4:f6:83 ->
> 00:22:b0:bc:1e:1e reason 6: Class 2 frame received from
> non-authenticated station
> 1249486651.878667: wlan0 (phy #0): disconnected (by AP) reason: 6: Class
> 2 frame received from non-authenticated station
>
> (note: connecting back)
> 1249486685.213545: wlan0 (phy #0): auth 00:1e:58:b4:f6:83 ->
> 00:22:b0:bc:1e:1e status: 0: Successful
> 1249486685.419764: wlan0 (phy #0): deauth 00:1e:58:b4:f6:83 ->
> 00:22:b0:bc:1e:1e reason 9: Station requesting (re)association is not
> authenticated with responding station
> 1249486685.419808: wlan0 (phy #0): failed to connect to
> 00:1e:58:b4:f6:83, status: 1: Unspecified failure
>
> Regards
> Dmitri
>
Right after i send message strange things started to happen.
I didn't use wireless for a while, however, i started to use it now, my
land lady insist on it, since she really doesnt like cables in her house.
for last couple of days it seemed to work without problems(in g mode),
this afternoon i have noticed that connection is shaky. I powerd off/on
my access point to improve situation - nothing changed.
I decided to take a look at it.
I decided to ping another machine connected over access point.
i noticed it freezes after some time for short period of time.
I decided to look at it over "iw event -t" as well
way i pinged other machine: "ping -A"
at some stage other machine stopped replying.
I looked into "iw event"
and got this:
1249487677.365807: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
1249487677.365880: wlan0 (phy #0): disconnected (local request)
I believe it happened couple of second later after pings stopped
replying, but i may be wrong, as it happened too quickly.
iw dev wlan0 scan
BSS 00:1e:58:b4:f6:83 (on wlan0)
TSF: 13042924 usec (0d, 00:00:13)
freq: 2442
beacon interval: 25
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -57.00 dBm
SSID: dlink
Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0
DS Paramater set: channel 7
ERP: <no flags>
Extended supported rates: 24.0 36.0 48.0 54.0
I manually set wlan0 to use 11M(or less) connection, as my Broadband
conenction is 12mbit(and it is very quick), which is rather annoying.
I hope it could be of help.
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-08-05 16:34 ` Dmitri Seletski
@ 2009-08-05 17:11 ` Luis R. Rodriguez
2009-08-05 19:51 ` Dmitri Seletski
0 siblings, 1 reply; 39+ messages in thread
From: Luis R. Rodriguez @ 2009-08-05 17:11 UTC (permalink / raw)
To: ath9k-devel
On Wed, Aug 05, 2009 at 09:34:34AM -0700, Dmitri Seletski wrote:
> Right after i send message strange things started to happen.
>
> I didn't use wireless for a while, however, i started to use it now, my
> land lady insist on it, since she really doesnt like cables in her house.
>
> for last couple of days it seemed to work without problems(in g mode),
> this afternoon i have noticed that connection is shaky. I powerd off/on
> my access point to improve situation - nothing changed.
>
> I decided to take a look at it.
>
> I decided to ping another machine connected over access point.
> i noticed it freezes after some time for short period of time.
> I decided to look at it over "iw event -t" as well
> way i pinged other machine: "ping -A"
> at some stage other machine stopped replying.
> I looked into "iw event"
>
> and got this:
> 1249487677.365807: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
> 00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
That should be your AP telling you that. Can you modify the
time out of inactivity on your AP?
> 1249487677.365880: wlan0 (phy #0): disconnected (local request)
>
> I believe it happened couple of second later after pings stopped
> replying, but i may be wrong, as it happened too quickly.
>
>
>
>
> iw dev wlan0 scan
> BSS 00:1e:58:b4:f6:83 (on wlan0)
> TSF: 13042924 usec (0d, 00:00:13)
> freq: 2442
> beacon interval: 25
> capability: ESS ShortPreamble ShortSlotTime (0x0421)
> signal: -57.00 dBm
> SSID: dlink
> Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0
> DS Paramater set: channel 7
> ERP: <no flags>
> Extended supported rates: 24.0 36.0 48.0 54.0
>
> I manually set wlan0 to use 11M(or less) connection, as my Broadband
> conenction is 12mbit(and it is very quick), which is rather annoying.
Your broadband connection throughput has nothing to do with your
wireless rate selection. Your rate selection is a physical
characteristic chosen on the device for communication. The bitrate
is defined by the modulation scheme used (BPSK, QPSK, 16QAM, 64QAM,
etc) amongst other things.
If you select 54Mbit/s bit rate you won't get exactly 54 MBit/s, the
bit PHY 54 MBit/s bit rate will be selected and what you actually
get will vary due to many factors.
> I hope it could be of help.
>
> From iwconfig:
> wlan0 IEEE 802.11bgn ESSID:"dlink"
> Mode:Managed Frequency:2.442 GHz Access Point:
> 00:1E:58:B4:F6:83
> Bit Rate=1 Mb/s Tx-Power=20 dBm
> Retry long limit:7 RTS thr:off Fragment thr:off
> Encryption key:off
> Power Management:on
> Link Quality=61/70 Signal level=-49 dBm
> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
> (usually link quality warries between 60-70)
Try to ditch iwconfig, and use iw: iw dev wlan0 link
For more info see:
http://wireless.kernel.org/en/users/Documentation/iw
http://wireless.kernel.org/en/users/Documentation/iw/replace-iwconfig
> Machine started to suffer with disconnects.
>
> Below is fuller log.
> 1249488753.366831: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
> 00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
> 1249488753.366985: wlan0 (phy #0): disconnected (local request)
> 1249488848.660029: wlan0 (phy #0): auth 00:1e:58:b4:f6:83 ->
> 00:22:b0:bc:1e:1e status: 0: Successful
> 1249488848.668387: wlan0 (phy #0): assoc 00:1e:58:b4:f6:83 ->
> 00:22:b0:bc:1e:1e status: 0: Successful
> 1249488848.668489: wlan0 (phy #0): connected to 00:1e:58:b4:f6:83
> 1249488918.365949: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
> 00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
Can you tune your AP?
Luis
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-08-05 17:11 ` Luis R. Rodriguez
@ 2009-08-05 19:51 ` Dmitri Seletski
2009-08-05 20:10 ` Dmitri Seletski
0 siblings, 1 reply; 39+ messages in thread
From: Dmitri Seletski @ 2009-08-05 19:51 UTC (permalink / raw)
To: ath9k-devel
Luis R. Rodriguez wrote:
> On Wed, Aug 05, 2009 at 09:34:34AM -0700, Dmitri Seletski wrote:
>
>> Right after i send message strange things started to happen.
>>
>> I didn't use wireless for a while, however, i started to use it now, my
>> land lady insist on it, since she really doesnt like cables in her house.
>>
>> for last couple of days it seemed to work without problems(in g mode),
>> this afternoon i have noticed that connection is shaky. I powerd off/on
>> my access point to improve situation - nothing changed.
>>
>> I decided to take a look at it.
>>
>> I decided to ping another machine connected over access point.
>> i noticed it freezes after some time for short period of time.
>> I decided to look at it over "iw event -t" as well
>> way i pinged other machine: "ping -A"
>> at some stage other machine stopped replying.
>> I looked into "iw event"
>>
>> and got this:
>> 1249487677.365807: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
>> 00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
>>
>
> That should be your AP telling you that. Can you modify the
> time out of inactivity on your AP?
>
>
>> 1249487677.365880: wlan0 (phy #0): disconnected (local request)
>>
>> I believe it happened couple of second later after pings stopped
>> replying, but i may be wrong, as it happened too quickly.
>>
>>
>>
>>
>> iw dev wlan0 scan
>> BSS 00:1e:58:b4:f6:83 (on wlan0)
>> TSF: 13042924 usec (0d, 00:00:13)
>> freq: 2442
>> beacon interval: 25
>> capability: ESS ShortPreamble ShortSlotTime (0x0421)
>> signal: -57.00 dBm
>> SSID: dlink
>> Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0
>> DS Paramater set: channel 7
>> ERP: <no flags>
>> Extended supported rates: 24.0 36.0 48.0 54.0
>>
>> I manually set wlan0 to use 11M(or less) connection, as my Broadband
>> conenction is 12mbit(and it is very quick), which is rather annoying.
>>
>
> Your broadband connection throughput has nothing to do with your
> wireless rate selection. Your rate selection is a physical
> characteristic chosen on the device for communication. The bitrate
> is defined by the modulation scheme used (BPSK, QPSK, 16QAM, 64QAM,
> etc) amongst other things.
>
> If you select 54Mbit/s bit rate you won't get exactly 54 MBit/s, the
> bit PHY 54 MBit/s bit rate will be selected and what you actually
> get will vary due to many factors.
>
>
>> I hope it could be of help.
>>
>> From iwconfig:
>> wlan0 IEEE 802.11bgn ESSID:"dlink"
>> Mode:Managed Frequency:2.442 GHz Access Point:
>> 00:1E:58:B4:F6:83
>> Bit Rate=1 Mb/s Tx-Power=20 dBm
>> Retry long limit:7 RTS thr:off Fragment thr:off
>> Encryption key:off
>> Power Management:on
>> Link Quality=61/70 Signal level=-49 dBm
>> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>> (usually link quality warries between 60-70)
>>
>
> Try to ditch iwconfig, and use iw: iw dev wlan0 link
>
> For more info see:
>
> http://wireless.kernel.org/en/users/Documentation/iw
> http://wireless.kernel.org/en/users/Documentation/iw/replace-iwconfig
>
>
>> Machine started to suffer with disconnects.
>>
>> Below is fuller log.
>> 1249488753.366831: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
>> 00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
>> 1249488753.366985: wlan0 (phy #0): disconnected (local request)
>> 1249488848.660029: wlan0 (phy #0): auth 00:1e:58:b4:f6:83 ->
>> 00:22:b0:bc:1e:1e status: 0: Successful
>> 1249488848.668387: wlan0 (phy #0): assoc 00:1e:58:b4:f6:83 ->
>> 00:22:b0:bc:1e:1e status: 0: Successful
>> 1249488848.668489: wlan0 (phy #0): connected to 00:1e:58:b4:f6:83
>> 1249488918.365949: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
>> 00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
>>
>
> Can you tune your AP?
>
> Luis
>
Hi guys
I am on the verge of frustration.
I have updated firmware for AP(by an accident found more new version
from Australian mirror of dlink, i dont even know if its legal or not
for me to install that firmware).
I was messing around with combination of sli nvidia/ipv6
I was clearly able to get connected over Nmode and bng moderebooted
computer i can connect over g mode now as well. I know that because i
was able to see from access point client info, which clearly stated
Nmode was working
Now i cant connect over n mode, and i get disconnected once every
minute. i get a lot of these:
1249500223.748309: wlan0 (phy #0): assoc 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e status: 0: Successful
1249500223.748414: wlan0 (phy #0): connected to 00:1e:58:b4:f6:83
1249500374.770847: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
1249500374.770924: wlan0 (phy #0): disconnected (local request)
1249500389.484218: wlan0 (phy #0): auth 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e status: 0: Successful
1249500389.492708: wlan0 (phy #0): assoc 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e status: 0: Successful
1249500389.492815: wlan0 (phy #0): connected to 00:1e:58:b4:f6:83
1249500533.770593: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
1249500533.770706: wlan0 (phy #0): disconnected (local request)
1249500749.108242: wlan0 (phy #0): auth 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e status: 0: Successful
1249500749.116632: wlan0 (phy #0): assoc 00:1e:58:b4:f6:83 ->
00:22:b0:bc:1e:1e status: 0: Successful
1249500749.116684: wlan0 (phy #0): connected to 00:1e:58:b4:f6:83
1249500758.770179: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
1249500758.770225: wlan0 (phy #0): disconnected (local request)
I started to get a lot of disconnects specifically today, before i
started to tinker with system.
My access point doesn't offer much by means of any time out
configuration.(i don't even know what i am looking for, but again access
point has small amount of options).
If you like i can try to make some sort of a tunnel, that will allow you
to remotely connect to access point. I wont give access to my own PC.
I feel like writing a small script, which will be a loop to connect my
wifi card to ap.
I am in a very bad situation(if not dire) i wont go into details, but i
am heavily dependent on internet, and I cant use it.
I specifically bought my wifi ap and wlan card, since i knew they were
compatible with linux (same brand, wlan was on chart of being compatible
with linux) if I knew than and there - o wouldnt buy them in the first
place, but than again, how can i buy something that is linux compatible?
I mean, i cant even trust linux compatibility charts anymore, they fail
miserably.
I just need help.
Dmitri
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-08-05 19:51 ` Dmitri Seletski
@ 2009-08-05 20:10 ` Dmitri Seletski
2009-08-05 20:53 ` Luis R. Rodriguez
0 siblings, 1 reply; 39+ messages in thread
From: Dmitri Seletski @ 2009-08-05 20:10 UTC (permalink / raw)
To: ath9k-devel
Dmitri Seletski wrote:
> Luis R. Rodriguez wrote:
>
>> On Wed, Aug 05, 2009 at 09:34:34AM -0700, Dmitri Seletski wrote:
>>
>>
>>> Right after i send message strange things started to happen.
>>>
>>> I didn't use wireless for a while, however, i started to use it now, my
>>> land lady insist on it, since she really doesnt like cables in her house.
>>>
>>> for last couple of days it seemed to work without problems(in g mode),
>>> this afternoon i have noticed that connection is shaky. I powerd off/on
>>> my access point to improve situation - nothing changed.
>>>
>>> I decided to take a look at it.
>>>
>>> I decided to ping another machine connected over access point.
>>> i noticed it freezes after some time for short period of time.
>>> I decided to look at it over "iw event -t" as well
>>> way i pinged other machine: "ping -A"
>>> at some stage other machine stopped replying.
>>> I looked into "iw event"
>>>
>>> and got this:
>>> 1249487677.365807: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
>>> 00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
>>>
>>>
>> That should be your AP telling you that. Can you modify the
>> time out of inactivity on your AP?
>>
>>
>>
>>> 1249487677.365880: wlan0 (phy #0): disconnected (local request)
>>>
>>> I believe it happened couple of second later after pings stopped
>>> replying, but i may be wrong, as it happened too quickly.
>>>
>>>
>>>
>>>
>>> iw dev wlan0 scan
>>> BSS 00:1e:58:b4:f6:83 (on wlan0)
>>> TSF: 13042924 usec (0d, 00:00:13)
>>> freq: 2442
>>> beacon interval: 25
>>> capability: ESS ShortPreamble ShortSlotTime (0x0421)
>>> signal: -57.00 dBm
>>> SSID: dlink
>>> Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0
>>> DS Paramater set: channel 7
>>> ERP: <no flags>
>>> Extended supported rates: 24.0 36.0 48.0 54.0
>>>
>>> I manually set wlan0 to use 11M(or less) connection, as my Broadband
>>> conenction is 12mbit(and it is very quick), which is rather annoying.
>>>
>>>
>> Your broadband connection throughput has nothing to do with your
>> wireless rate selection. Your rate selection is a physical
>> characteristic chosen on the device for communication. The bitrate
>> is defined by the modulation scheme used (BPSK, QPSK, 16QAM, 64QAM,
>> etc) amongst other things.
>>
>> If you select 54Mbit/s bit rate you won't get exactly 54 MBit/s, the
>> bit PHY 54 MBit/s bit rate will be selected and what you actually
>> get will vary due to many factors.
>>
>>
>>
>>> I hope it could be of help.
>>>
>>> From iwconfig:
>>> wlan0 IEEE 802.11bgn ESSID:"dlink"
>>> Mode:Managed Frequency:2.442 GHz Access Point:
>>> 00:1E:58:B4:F6:83
>>> Bit Rate=1 Mb/s Tx-Power=20 dBm
>>> Retry long limit:7 RTS thr:off Fragment thr:off
>>> Encryption key:off
>>> Power Management:on
>>> Link Quality=61/70 Signal level=-49 dBm
>>> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
>>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>>> (usually link quality warries between 60-70)
>>>
>>>
>> Try to ditch iwconfig, and use iw: iw dev wlan0 link
>>
>> For more info see:
>>
>> http://wireless.kernel.org/en/users/Documentation/iw
>> http://wireless.kernel.org/en/users/Documentation/iw/replace-iwconfig
>>
>>
>>
>>> Machine started to suffer with disconnects.
>>>
>>> Below is fuller log.
>>> 1249488753.366831: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
>>> 00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
>>> 1249488753.366985: wlan0 (phy #0): disconnected (local request)
>>> 1249488848.660029: wlan0 (phy #0): auth 00:1e:58:b4:f6:83 ->
>>> 00:22:b0:bc:1e:1e status: 0: Successful
>>> 1249488848.668387: wlan0 (phy #0): assoc 00:1e:58:b4:f6:83 ->
>>> 00:22:b0:bc:1e:1e status: 0: Successful
>>> 1249488848.668489: wlan0 (phy #0): connected to 00:1e:58:b4:f6:83
>>> 1249488918.365949: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
>>> 00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
>>>
>>>
>> Can you tune your AP?
>>
>> Luis
>>
>>
> Hi guys
> I am on the verge of frustration.
> I have updated firmware for AP(by an accident found more new version
> from Australian mirror of dlink, i dont even know if its legal or not
> for me to install that firmware).
> I was messing around with combination of sli nvidia/ipv6
> I was clearly able to get connected over Nmode and bng moderebooted
> computer i can connect over g mode now as well. I know that because i
> was able to see from access point client info, which clearly stated
> Nmode was working
> Now i cant connect over n mode, and i get disconnected once every
> minute. i get a lot of these:
>
> 1249500223.748309: wlan0 (phy #0): assoc 00:1e:58:b4:f6:83 ->
> 00:22:b0:bc:1e:1e status: 0: Successful
> 1249500223.748414: wlan0 (phy #0): connected to 00:1e:58:b4:f6:83
> 1249500374.770847: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
> 00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
> 1249500374.770924: wlan0 (phy #0): disconnected (local request)
> 1249500389.484218: wlan0 (phy #0): auth 00:1e:58:b4:f6:83 ->
> 00:22:b0:bc:1e:1e status: 0: Successful
> 1249500389.492708: wlan0 (phy #0): assoc 00:1e:58:b4:f6:83 ->
> 00:22:b0:bc:1e:1e status: 0: Successful
> 1249500389.492815: wlan0 (phy #0): connected to 00:1e:58:b4:f6:83
> 1249500533.770593: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
> 00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
> 1249500533.770706: wlan0 (phy #0): disconnected (local request)
> 1249500749.108242: wlan0 (phy #0): auth 00:1e:58:b4:f6:83 ->
> 00:22:b0:bc:1e:1e status: 0: Successful
> 1249500749.116632: wlan0 (phy #0): assoc 00:1e:58:b4:f6:83 ->
> 00:22:b0:bc:1e:1e status: 0: Successful
> 1249500749.116684: wlan0 (phy #0): connected to 00:1e:58:b4:f6:83
> 1249500758.770179: wlan0 (phy #0): deauth 00:22:b0:bc:1e:1e ->
> 00:1e:58:b4:f6:83 reason 4: Disassociated due to inactivity
> 1249500758.770225: wlan0 (phy #0): disconnected (local request)
>
> I started to get a lot of disconnects specifically today, before i
> started to tinker with system.
> My access point doesn't offer much by means of any time out
> configuration.(i don't even know what i am looking for, but again access
> point has small amount of options).
> If you like i can try to make some sort of a tunnel, that will allow you
> to remotely connect to access point. I wont give access to my own PC.
>
> I feel like writing a small script, which will be a loop to connect my
> wifi card to ap.
>
> I am in a very bad situation(if not dire) i wont go into details, but i
> am heavily dependent on internet, and I cant use it.
> I specifically bought my wifi ap and wlan card, since i knew they were
> compatible with linux (same brand, wlan was on chart of being compatible
> with linux) if I knew than and there - o wouldnt buy them in the first
> place, but than again, how can i buy something that is linux compatible?
> I mean, i cant even trust linux compatibility charts anymore, they fail
> miserably.
>
> I just need help.
> Dmitri
>
Sorry, please cut out the emotional part.
script seemed to help me a bit...
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-08-05 20:10 ` Dmitri Seletski
@ 2009-08-05 20:53 ` Luis R. Rodriguez
2009-08-05 20:57 ` Luis R. Rodriguez
` (2 more replies)
0 siblings, 3 replies; 39+ messages in thread
From: Luis R. Rodriguez @ 2009-08-05 20:53 UTC (permalink / raw)
To: ath9k-devel
On Wed, Aug 05, 2009 at 01:10:19PM -0700, Dmitri Seletski wrote:
> Sorry, please cut out the emotional part.
> script seemed to help me a bit...
Dmitry, I don't have time to look at your logs right now, but
am hoping someone in our team will be soon.
But as far as your disconnects are concerned I'll note that
some others users were experiencing similar issues when using
wireless-testing, a few patches were added recently to address
some of these issues, namely:
commit 3810f40f71ccf690bc10152fb0706f7a4e9b8e87
Author: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Fri Jul 31 18:54:23 2009 +0300
mac80211: Increase timeouts for station polling
Do a probe request every 30 seconds, and wait for probe response,
half a second This should lower the traffic that card sends, thus save
power Wainting longer for response makes probe more robust against
'slow' access points
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 9004c35534fbdb452d2f544c8ae59dcadc486465
Author: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Fri Jul 31 18:54:12 2009 +0300
mac80211: Retry probe request few times
Retry 5 times (chosen arbitary ), before assuming
that station is out of range.
Fixes frequent disassociations while connected to weak,
and sometimes even strong access points.
Signed-off-by: Maxim Levitky <maximlevitsky@gmail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Check git log net/mac80211/ and see if you see these there.
Also, there does seem to be a regression on wireless-testing
right now regarding re-association, I'll let you know more
about it the more I find but I believe Johannes is already
working on it, I am not really sure of the details or if
this can be affecting you right now.
Also, 'iw dev wlan0 connect foo' will work but expect to be
disconnected eventually due to noise or in your case due to
inactivity. Instead of scripting out a way to always connect
you can just use wpa_supplicant to help 'roam' so that it
keeps re-associating for you if disconnected. I tend to
use 'iw dev wlan0 connect foo' only to test things, if I want
to ensure I always remain connected I use wpa_supplicant with
roaming enabled, I do this even with no encryption enabled.
mcgrof at tux ~ $ cat mosca.conf
ctrl_interface=/var/run/wpa_supplicant
ap_scan=1
network={
ssid="mosca"
scan_ssid=1
key_mgmt=NONE
}
sudo wpa_supplicant -D nl80211 -c mosca.conf -i wlan0
While at it you might as well get the latest supplicant from git:
git clone git://w1.fi/srv/git/hostap.git
cd hostap/wpa_supplicant
cp defconfig .config
Then edit .config and ensure you have these enabled:
# Driver interface for generic Linux wireless extensions
CONFIG_DRIVER_WEXT=y
# Driver interface for Linux drivers using the nl80211 kernel interface
CONFIG_DRIVER_NL80211=y
Build it and install it.
Keep in mind we need to address two issues here:
1) Your current disconnect issues
2) Your card not being able to complete association (was this the issue?)
to your AP when 802.11n is enabled.
We should focus on both for sure but be sure to help try to isolate the
issues so we don't get them mixed up.
To help more with this it may help for you to put logs for both separetely,
from the kernel, 'iw event -t', and the wpa_supplicant logs with "-d" added
to increase verbosity.
Can you please create two directories and put logs into them for both of these
issues? The easier it is to separate the issues and review the logs the easier
it will be review your issues and help you resolve them.
Don't bother with tcpdump/wireshark dumps for now. Only provide them if
you are asked.
Luis
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-08-05 20:53 ` Luis R. Rodriguez
@ 2009-08-05 20:57 ` Luis R. Rodriguez
2009-08-06 13:53 ` [ath9k-devel] N compile SUSE bnc
2009-09-15 11:28 ` [ath9k-devel] N mode Dmitri Seletski
2 siblings, 0 replies; 39+ messages in thread
From: Luis R. Rodriguez @ 2009-08-05 20:57 UTC (permalink / raw)
To: ath9k-devel
On Wed, Aug 5, 2009 at 1:53 PM, Luis R. Rodriguez<lrodriguez@atheros.com> wrote:
> On Wed, Aug 05, 2009 at 01:10:19PM -0700, Dmitri Seletski wrote:
>> Sorry, please cut out the emotional part.
>> script seemed to help me a bit...
>
> Dmitry, I don't have time to look at your logs right now, but
> am hoping someone in our team will be soon.
I should also mention that the team that will probably look at this is
on a different timezone, (IST), so it will take a while before you get
some more analysis on this.
Luis
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N compile SUSE
2009-08-05 20:53 ` Luis R. Rodriguez
2009-08-05 20:57 ` Luis R. Rodriguez
@ 2009-08-06 13:53 ` bnc
2009-08-06 19:42 ` Pavel Roskin
2009-09-15 11:28 ` [ath9k-devel] N mode Dmitri Seletski
2 siblings, 1 reply; 39+ messages in thread
From: bnc @ 2009-08-06 13:53 UTC (permalink / raw)
To: ath9k-devel
Hi,
I am currently using Linux L2 2.6.29-rc7-wl-W #35, with no apparent
problems. Except that it shows me using 11g, while both the router
and the pcmcia card are 11n.
Anyway, since 2.6.29-rc7-wl from wireless testing I have not been able
to compile and install.
I have just done a compile and install of the modules and it was very
clean, hardly any error messages:)
However, I tried to run the mkinitrd command and got the errors below.
This is all on a SUSE 11.1 system.
Not sure how to proceed from here.
Thanks,
Brian
cd /boot
L2:/boot # mkinitrd -k vmlinuz-2.6.31-rc5-wl-W -i
initrd-2.6.31-rc5-wl-W -M /boot/System.map-2.6.31-rc5-wl-W
Kernel image: /boot/vmlinuz-2.6.31-rc5-wl-W
Initrd image: /boot/initrd-2.6.31-rc5-wl-W
Root device: /dev/sda7 (mounted on / as reiserfs)
Resume
device: /dev/disk/by-id/ata-IC25N060ATMR04-0_MRG30HKCJUH7WH-part5
(/dev/sda5) FATAL: Module edd not found. WARNING: no dependencies for
kernel module 'edd' found. FATAL: Module sd_mod not found.
WARNING: no dependencies for kernel module 'sd_mod' found.
FATAL: Module usbcore not found.
WARNING: no dependencies for kernel module 'usbcore' found.
Kernel Modules: ata_piix ata_generic ide-core piix ide-pci-generic
reiserfs fan ohci-hcd uhci-hcd ehci-hcd hid usbhid Features:
block usb resume.userspace resume.kernel Bootsplash: openSUSE
(1600x1200), openSUSE (800x600) 36982 blocks
/proc/misc: No entry for device-mapper found
Is device-mapper driver missing from kernel?
Failure to communicate with kernel device-mapper driver.
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N compile SUSE
2009-08-06 13:53 ` [ath9k-devel] N compile SUSE bnc
@ 2009-08-06 19:42 ` Pavel Roskin
0 siblings, 0 replies; 39+ messages in thread
From: Pavel Roskin @ 2009-08-06 19:42 UTC (permalink / raw)
To: ath9k-devel
On Thu, 2009-08-06 at 23:53 +1000, bnc wrote:
> However, I tried to run the mkinitrd command and got the errors below.
This list is a wrong place to ask.
> This is all on a SUSE 11.1 system.
> Not sure how to proceed from here.
Please ask in a list of forum about SUSE or search the web. I'm sure
you are not the first person to attempt installing a custom kernel on
SUSE.
--
Regards,
Pavel Roskin
^ permalink raw reply [flat|nested] 39+ messages in thread
* [ath9k-devel] N mode
2009-08-05 20:53 ` Luis R. Rodriguez
2009-08-05 20:57 ` Luis R. Rodriguez
2009-08-06 13:53 ` [ath9k-devel] N compile SUSE bnc
@ 2009-09-15 11:28 ` Dmitri Seletski
2 siblings, 0 replies; 39+ messages in thread
From: Dmitri Seletski @ 2009-09-15 11:28 UTC (permalink / raw)
To: ath9k-devel
intermittent issue is back.
I have noticed it's back once i have 2 another new networks in reach.(i
didnt notice them before)
iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: 7A:87:E9:46:02:B1
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=39/70 Signal level=-71 dBm
Encryption key:on
ESSID:"WASC-001a6bc94d33-PHILIPS"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Ad-Hoc
Extra:tsf=00000150911261b8
Extra: Last beacon: 103ms ago
IE: Unknown:
0019574153432D3030316136626339346433332D5048494C495053
IE: Unknown: 010882848B962430486C
IE: Unknown: 03010B
IE: Unknown: 06020000
IE: Unknown: 2A0100
IE: Unknown: 2F0100
IE: Unknown: 32040C121860
IE: Unknown: DD06001018020010
Cell 02 - Address: 00:1E:58:B4:F6:83
Channel:7
Frequency:2.442 GHz (Channel 7)
Quality=70/70 Signal level=-34 dBm
Encryption key:off
ESSID:"dlink"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=0000000000104df5
Extra: Last beacon: 30ms ago
IE: Unknown: 0005646C696E6B
IE: Unknown: 010882848B960C121824
IE: Unknown: 030107
IE: Unknown: 2A0100
IE: Unknown: 32043048606C
IE: Unknown:
DD1E00904C334E1003FFFF000000000000000000000000000000000000000000
IE: Unknown:
2D1A4E1003FFFF000000000000000000000000000000000000000000
IE: Unknown:
DD1A00904C34070B0800000000000000000000000000000000000000
IE: Unknown:
3D16070B0800000000000000000000000000000000000000
IE: Unknown: DD0900037F01010000FF7F
IE: Unknown: DD0A00037F04010001000000
Cell 03 - Address: 00:1F:1F:21:AB:7C
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=25/70 Signal level=-85 dBm
Encryption key:off
ESSID:"INTELLINET"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
18 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
Mode:Unknown/bug
Extra:tsf=0000005eb81d3146
Extra: Last beacon: 107ms ago
IE: Unknown: 000A494E54454C4C494E4554
IE: Unknown: 010882848B961224486C
IE: Unknown: 03010B
IE: Unknown: 32040C183060
IE: Unknown: 33082001020304050607
IE: Unknown: 33082105060708090A0B
IE: Unknown:
DD270050F204104A0001101044000101104700102880288028801880A880001F1F21AB7C103C000101
IE: Unknown: 050400030000
IE: Unknown: 2A0104
IE: Unknown:
2D1AEE1117FFFF0000010000000000000000000000000C0000000000
IE: Unknown:
3D160B070100000000000000000000000000000000000000
IE: Unknown: 7F0101
IE: Unknown:
DD180050F2020101000003A4000027A400004243600062323000
IE: Unknown:
DD1E00904C33EE1117FFFF0000010000000000000000000000000C0000000000
IE: Unknown:
DD1A00904C340B070100000000000000000000000000000000000000
IE: Unknown: DD07000C4304000000
i can do more of logging on wpa supplicant. right now i am mentally
incapable of continuing. this is in mixed b/n/g mode. i only care about
gmode, to make it work. once g mode is sorted lets try to sort out
nmode as well please.
wpa supplicant config below:
cat /root/wpa.conf
network={
ssid="dlink"
priority=4
key_mgmt=NONE
}
Luis R. Rodriguez wrote:
> On Wed, Aug 05, 2009 at 01:10:19PM -0700, Dmitri Seletski wrote:
>
>> Sorry, please cut out the emotional part.
>> script seemed to help me a bit...
>>
>
> Dmitry, I don't have time to look at your logs right now, but
> am hoping someone in our team will be soon.
>
> But as far as your disconnects are concerned I'll note that
> some others users were experiencing similar issues when using
> wireless-testing, a few patches were added recently to address
> some of these issues, namely:
>
> commit 3810f40f71ccf690bc10152fb0706f7a4e9b8e87
> Author: Maxim Levitsky <maximlevitsky@gmail.com>
> Date: Fri Jul 31 18:54:23 2009 +0300
>
> mac80211: Increase timeouts for station polling
>
> Do a probe request every 30 seconds, and wait for probe response,
> half a second This should lower the traffic that card sends, thus save
> power Wainting longer for response makes probe more robust against
> 'slow' access points
>
> Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
> Acked-by: Johannes Berg <johannes@sipsolutions.net>
> Tested-by: Marcel Holtmann <marcel@holtmann.org>
> Signed-off-by: John W. Linville <linville@tuxdriver.com>
>
> commit 9004c35534fbdb452d2f544c8ae59dcadc486465
> Author: Maxim Levitsky <maximlevitsky@gmail.com>
> Date: Fri Jul 31 18:54:12 2009 +0300
>
> mac80211: Retry probe request few times
>
> Retry 5 times (chosen arbitary ), before assuming
> that station is out of range.
>
> Fixes frequent disassociations while connected to weak,
> and sometimes even strong access points.
>
> Signed-off-by: Maxim Levitky <maximlevitsky@gmail.com>
> Acked-by: Johannes Berg <johannes@sipsolutions.net>
> Signed-off-by: John W. Linville <linville@tuxdriver.com>
>
>
> Check git log net/mac80211/ and see if you see these there.
>
> Also, there does seem to be a regression on wireless-testing
> right now regarding re-association, I'll let you know more
> about it the more I find but I believe Johannes is already
> working on it, I am not really sure of the details or if
> this can be affecting you right now.
>
> Also, 'iw dev wlan0 connect foo' will work but expect to be
> disconnected eventually due to noise or in your case due to
> inactivity. Instead of scripting out a way to always connect
> you can just use wpa_supplicant to help 'roam' so that it
> keeps re-associating for you if disconnected. I tend to
> use 'iw dev wlan0 connect foo' only to test things, if I want
> to ensure I always remain connected I use wpa_supplicant with
> roaming enabled, I do this even with no encryption enabled.
>
> mcgrof at tux ~ $ cat mosca.conf
> ctrl_interface=/var/run/wpa_supplicant
> ap_scan=1
> network={
> ssid="mosca"
> scan_ssid=1
> key_mgmt=NONE
> }
>
> sudo wpa_supplicant -D nl80211 -c mosca.conf -i wlan0
>
> While at it you might as well get the latest supplicant from git:
>
> git clone git://w1.fi/srv/git/hostap.git
> cd hostap/wpa_supplicant
> cp defconfig .config
>
> Then edit .config and ensure you have these enabled:
>
> # Driver interface for generic Linux wireless extensions
> CONFIG_DRIVER_WEXT=y
> # Driver interface for Linux drivers using the nl80211 kernel interface
> CONFIG_DRIVER_NL80211=y
>
> Build it and install it.
>
> Keep in mind we need to address two issues here:
>
> 1) Your current disconnect issues
> 2) Your card not being able to complete association (was this the issue?)
> to your AP when 802.11n is enabled.
>
> We should focus on both for sure but be sure to help try to isolate the
> issues so we don't get them mixed up.
>
> To help more with this it may help for you to put logs for both separetely,
> from the kernel, 'iw event -t', and the wpa_supplicant logs with "-d" added
> to increase verbosity.
>
> Can you please create two directories and put logs into them for both of these
> issues? The easier it is to separate the issues and review the logs the easier
> it will be review your issues and help you resolve them.
>
> Don't bother with tcpdump/wireshark dumps for now. Only provide them if
> you are asked.
>
> Luis
>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: iwevent.txt
Url: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20090915/d10d1d3e/attachment-0002.txt
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: wpa_sup.txt
Url: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20090915/d10d1d3e/attachment-0003.txt
^ permalink raw reply [flat|nested] 39+ messages in thread
end of thread, other threads:[~2009-09-15 11:28 UTC | newest]
Thread overview: 39+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-05-16 12:46 [ath9k-devel] N mode Dmitri Seletski
2009-05-16 21:23 ` Dmitri Seletski
2009-05-18 15:33 ` Luis R. Rodriguez
2009-05-18 20:56 ` Dmitri Seletski
2009-05-18 20:57 ` Dmitri Seletski
2009-05-18 21:14 ` Luis R. Rodriguez
2009-05-18 21:33 ` Dmitri Seletski
2009-05-18 22:45 ` Luis R. Rodriguez
2009-05-18 23:09 ` Dmitri Seletski
2009-05-18 23:29 ` Luis R. Rodriguez
2009-05-18 23:34 ` Dmitri Seletski
2009-05-18 23:59 ` Luis R. Rodriguez
2009-05-19 0:10 ` Luis R. Rodriguez
2009-05-19 0:24 ` Luis R. Rodriguez
2009-05-19 0:33 ` Dmitri Seletski
2009-05-19 0:41 ` Luis R. Rodriguez
2009-05-19 18:55 ` Dmitri Seletski
2009-05-26 21:42 ` Luis R. Rodriguez
[not found] ` <4A2E8611.6010401@gmail.com>
[not found] ` <20090609214205.GD12776@tesla>
[not found] ` <4A2EDB3B.9020503@gmail.com>
[not found] ` <20090609220733.GF12776@tesla>
[not found] ` <4A2EDF1E.4000707@gmail.com>
[not found] ` <4A3445CC.7010607@gmail.com>
[not found] ` <20090615160144.GB19674@tesla>
2009-06-15 17:47 ` Luis R. Rodriguez
2009-06-15 20:28 ` Dmitri Seletski
[not found] ` <4A36CFF9.6070506@gmail.com>
[not found] ` <20090616003715.GA5492@tesla>
2009-07-25 0:49 ` Dmitri Seletski
2009-07-25 17:37 ` Senthilkumar Balasubramanian
2009-07-25 18:54 ` Dmitri Seletski
2009-07-27 20:04 ` Dmitri Seletski
2009-08-05 3:43 ` Dmitri Seletski
2009-08-05 15:34 ` Luis R. Rodriguez
2009-08-05 15:54 ` Dmitri Seletski
2009-08-05 16:34 ` Dmitri Seletski
2009-08-05 17:11 ` Luis R. Rodriguez
2009-08-05 19:51 ` Dmitri Seletski
2009-08-05 20:10 ` Dmitri Seletski
2009-08-05 20:53 ` Luis R. Rodriguez
2009-08-05 20:57 ` Luis R. Rodriguez
2009-08-06 13:53 ` [ath9k-devel] N compile SUSE bnc
2009-08-06 19:42 ` Pavel Roskin
2009-09-15 11:28 ` [ath9k-devel] N mode Dmitri Seletski
2009-05-18 23:36 ` Dmitri Seletski
2009-05-18 21:09 ` Luis R. Rodriguez
2009-05-18 21:17 ` Dmitri Seletski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.