From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>
Subject: [PATCH -v2] x86: increase NR_IRQS and nr_irqs
Date: Mon, 28 Dec 2009 21:08:29 -0800 [thread overview]
Message-ID: <4B398ECD.1080506@kernel.org> (raw)
In-Reply-To: <20091228094707.GH24690@elte.hu>
have a system with lots of igb and ixgbe, when iov/vf are enabled for
them, we hit the limit of 3064.
when system have 20 pcie installed, and one card have 2 functions, and one
function need 64 msi-x,
may need 20 * 2 * 64 = 2560 for msi-x
but if iov and vf are enabled
may need 20 * 2 * 64 * 3 = 7680 for msi-x
assume system with 5 ioapic, nr_irqs_gsi will be 120.
NR_CPUS = 512, and nr_cpu_ids = 128
will have NR_IRQS = 256 + 512 * 64 = 33024
will have nr_irqs = 120 + 8 * 128 + 120 * 64 = 8824
when SPARSE_IRQ is not set, there is no increase with data
when NR_CPUS=128, and SPARSE_IRQ is set
text data bss dec hex filename
21837444 4216564 12480736 38534744 24bfe58 vmlinux.before
21837442 4216580 12480736 38534758 24bfe66 vmlinux.after
when NR_CPUS=4096, and SPARSE_IRQ is set
text data bss dec hex filename
21878619 5610244 13415392 40904255 270263f vmlinux.before
21878617 5610244 13415392 40904253 270263d vmlinux.after
-v2: update comments to address Ingo's concern
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/irq_vectors.h | 12 ++++++------
arch/x86/kernel/apic/io_apic.c | 2 +-
2 files changed, 7 insertions(+), 7 deletions(-)
Index: linux-2.6/arch/x86/include/asm/irq_vectors.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/irq_vectors.h
+++ linux-2.6/arch/x86/include/asm/irq_vectors.h
@@ -154,21 +154,21 @@ static inline int invalid_vm86_irq(int i
#define NR_IRQS_LEGACY 16
-#define CPU_VECTOR_LIMIT ( 8 * NR_CPUS )
#define IO_APIC_VECTOR_LIMIT ( 32 * MAX_IO_APICS )
#ifdef CONFIG_X86_IO_APIC
# ifdef CONFIG_SPARSE_IRQ
+# define CPU_VECTOR_LIMIT (64 * NR_CPUS)
# define NR_IRQS \
(CPU_VECTOR_LIMIT > IO_APIC_VECTOR_LIMIT ? \
(NR_VECTORS + CPU_VECTOR_LIMIT) : \
(NR_VECTORS + IO_APIC_VECTOR_LIMIT))
# else
-# if NR_CPUS < MAX_IO_APICS
-# define NR_IRQS (NR_VECTORS + 4*CPU_VECTOR_LIMIT)
-# else
-# define NR_IRQS (NR_VECTORS + IO_APIC_VECTOR_LIMIT)
-# endif
+# define CPU_VECTOR_LIMIT (32 * NR_CPUS)
+# define NR_IRQS \
+ (CPU_VECTOR_LIMIT < IO_APIC_VECTOR_LIMIT ? \
+ (NR_VECTORS + CPU_VECTOR_LIMIT) : \
+ (NR_VECTORS + IO_APIC_VECTOR_LIMIT))
# endif
#else /* !CONFIG_X86_IO_APIC: */
# define NR_IRQS NR_IRQS_LEGACY
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -3840,7 +3840,7 @@ int __init arch_probe_nr_irqs(void)
/*
* for MSI and HT dyn irq
*/
- nr += nr_irqs_gsi * 16;
+ nr += nr_irqs_gsi * 64;
#endif
if (nr < nr_irqs)
nr_irqs = nr;
next prev parent reply other threads:[~2009-12-29 5:10 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-25 8:42 [PATCH] x86: increase NR_IRQS and nr_irqs Yinghai Lu
2009-12-28 9:47 ` Ingo Molnar
2009-12-29 5:08 ` Yinghai Lu [this message]
2009-12-30 12:21 ` [tip:x86/apic] x86: Increase " tip-bot for Yinghai Lu
2010-01-04 3:06 ` [PATCH -v2] x86: increase " Jesse Brandeburg
2010-01-04 3:20 ` Yinghai Lu
2010-01-04 6:56 ` Subject: [PATCH 1/2] x86: get back 15 vectors Yinghai Lu
2010-01-04 16:18 ` Eric W. Biederman
2010-01-04 18:40 ` Yinghai Lu
2010-01-04 19:04 ` Eric W. Biederman
2010-01-04 19:14 ` H. Peter Anvin
2010-01-04 19:01 ` H. Peter Anvin
2010-01-04 19:09 ` Eric W. Biederman
2010-01-04 19:35 ` Yinghai Lu
2010-01-04 19:45 ` Suresh Siddha
2010-01-04 19:50 ` H. Peter Anvin
2010-01-05 0:05 ` Suresh Siddha
2010-01-05 0:16 ` Yinghai Lu
2010-01-05 5:30 ` [tip:x86/apic] x86, apic: Reclaim IDT vectors 0x20-0x2f tip-bot for H. Peter Anvin
2010-01-04 19:48 ` Subject: [PATCH 1/2] x86: get back 15 vectors H. Peter Anvin
2010-01-04 20:06 ` Yinghai Lu
2010-01-04 20:14 ` Eric W. Biederman
2010-01-04 20:33 ` Yinghai Lu
2010-01-04 21:10 ` H. Peter Anvin
2010-01-04 21:20 ` Yinghai Lu
2010-01-04 21:33 ` H. Peter Anvin
2010-01-04 22:01 ` Yinghai Lu
2010-01-04 23:03 ` H. Peter Anvin
2010-01-04 23:32 ` Yinghai Lu
2010-01-04 23:38 ` H. Peter Anvin
2010-01-04 23:42 ` Yinghai Lu
2010-01-04 23:49 ` Yinghai Lu
2010-01-04 23:59 ` H. Peter Anvin
2010-01-05 5:30 ` [tip:x86/apic] x86, apic: Don't waste a vector to improve vector spread tip-bot for H. Peter Anvin
2010-01-04 20:08 ` Subject: [PATCH 1/2] x86: get back 15 vectors Eric W. Biederman
2010-01-04 6:58 ` [PATCH 2/2] x86: get more exact nr_irqs Yinghai Lu
2010-01-04 16:55 ` Eric W. Biederman
2010-01-04 19:03 ` Yinghai Lu
2010-01-04 19:16 ` Eric W. Biederman
2010-01-04 19:30 ` H. Peter Anvin
2010-01-04 19:47 ` Yinghai Lu
2010-01-04 20:05 ` Eric W. Biederman
2010-01-04 21:50 ` H. Peter Anvin
2010-01-04 6:59 ` [PATCH 1/2] x86: get back 15 vectors Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B398ECD.1080506@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.