From: Stefan Ringel <stefan.ringel@arcor.de>
To: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: linux-media@vger.kernel.org,
Devin Heitmueller <dheitmueller@kernellabs.com>
Subject: [PATCH 11/15] - tm6000 add init for tm6010
Date: Wed, 03 Feb 2010 21:29:10 +0100 [thread overview]
Message-ID: <4B69DC96.1040704@arcor.de> (raw)
In-Reply-To: <4B69D8CC.2030008@arcor.de>
signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
--- a/drivers/staging/tm6000/tm6000-core.c
+++ b/drivers/staging/tm6000/tm6000-core.c
@@ -394,7 +414,15 @@ struct reg_init tm6010_init_tab[] = {
{ REQ_07_SET_GET_AVREG, 0x3f, 0x00 },
{ REQ_05_SET_GET_USBREG, 0x18, 0x00 },
-
+
+ /* additional from Terratec Cinergy Hybrid XE */
+ { REQ_07_SET_GET_AVREG, 0xdc, 0xaa },
+ { REQ_07_SET_GET_AVREG, 0xdd, 0x30 },
+ { REQ_07_SET_GET_AVREG, 0xde, 0x20 },
+ { REQ_07_SET_GET_AVREG, 0xdf, 0xd0 },
+ { REQ_04_EN_DISABLE_MCU_INT, 0x02, 0x00 },
+ { REQ_07_SET_GET_AVREG, 0xd8, 0x2f },
+
/* set remote wakeup key:any key wakeup */
{ REQ_07_SET_GET_AVREG, 0xe5, 0xfe },
{ REQ_07_SET_GET_AVREG, 0xda, 0xff },
@@ -404,6 +432,7 @@ int tm6000_init (struct tm6000_core *dev)
{
int board, rc=0, i, size;
struct reg_init *tab;
+ u8 buf[40];
if (dev->dev_type == TM6010) {
tab = tm6010_init_tab;
@@ -424,61 +453,129 @@ int tm6000_init (struct tm6000_core *dev)
}
}
- msleep(5); /* Just to be conservative */
-
- /* Check board version - maybe 10Moons specific */
- board=tm6000_get_reg16 (dev, 0x40, 0, 0);
- if (board >=0) {
- printk (KERN_INFO "Board version = 0x%04x\n",board);
- } else {
- printk (KERN_ERR "Error %i while retrieving board
version\n",board);
- }
-
+ /* hack */
if (dev->dev_type == TM6010) {
- /* Turn xceive 3028 on */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_3, 0x01);
- msleep(11);
- }
-
- /* Reset GPIO1 and GPIO4. */
- for (i=0; i< 2; i++) {
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->tuner_reset_gpio, 0x00);
- if (rc<0) {
- printk (KERN_ERR "Error %i doing GPIO1 reset\n",rc);
- return rc;
- }
-
- msleep(10); /* Just to be conservative */
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->tuner_reset_gpio, 0x01);
- if (rc<0) {
- printk (KERN_ERR "Error %i doing GPIO1 reset\n",rc);
- return rc;
- }
-
- msleep(10);
- rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_4, 0);
- if (rc<0) {
- printk (KERN_ERR "Error %i doing GPIO4 reset\n",rc);
- return rc;
- }
-
- msleep(10);
- rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_4, 1);
- if (rc<0) {
- printk (KERN_ERR "Error %i doing GPIO4 reset\n",rc);
- return rc;
- }
-
- if (!i) {
- rc=tm6000_get_reg16(dev, 0x40,0,0);
- if (rc>=0) {
- printk ("board=%d\n", rc);
+
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_4, 0);
+ msleep(15);
+
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_1, 0);
+
+ msleep(50);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_1, 1);
+
+ msleep(15);
+ tm6000_read_write_usb (dev, 0xc0, 0x0e, 0x0010, 0x4400, buf, 2);
+
+ msleep(15);
+ tm6000_read_write_usb (dev, 0xc0, 0x10, 0xf432, 0x0000, buf, 2);
+
+ msleep(15);
+ buf[0] = 0x12;
+ buf[1] = 0x34;
+ tm6000_read_write_usb (dev, 0x40, 0x10, 0xf432, 0x0000, buf, 2);
+
+ msleep(15);
+ tm6000_read_write_usb (dev, 0xc0, 0x10, 0xf432, 0x0000, buf, 2);
+
+ msleep(15);
+ tm6000_read_write_usb (dev, 0xc0, 0x10, 0x0032, 0x0000, buf, 2);
+
+ msleep(15);
+ buf[0] = 0x00;
+ buf[1] = 0x01;
+ tm6000_read_write_usb (dev, 0x40, 0x10, 0xf332, 0x0000, buf, 2);
+
+ msleep(15);
+ tm6000_read_write_usb (dev, 0xc0, 0x10, 0x00c0, 0x0000, buf, 39);
+
+ msleep(15);
+ buf[0] = 0x00;
+ buf[1] = 0x00;
+ tm6000_read_write_usb (dev, 0x40, 0x10, 0xf332, 0x0000, buf, 2);
+
+ msleep(15);
+ tm6000_read_write_usb (dev, 0xc0, 0x10, 0x7f1f, 0x0000, buf, 2);
+// printk(KERN_INFO "buf %#x %#x \n", buf[0], buf [1]);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_4, 1);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_0, 1);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_7, 0);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_5, 1);
+
+ msleep(15);
+
+ for (i=0; i< size; i++) {
+ rc= tm6000_set_reg (dev, tab[i].req, tab[i].reg, tab[i].val);
+ if (rc<0) {
+ printk (KERN_ERR "Error %i while setting req %d, "
+ "reg %d to value %d\n", rc,
+ tab[i].req,tab[i].reg, tab[i].val);
+ return rc;
}
}
+
+ msleep(15);
+
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_4, 0);
+ msleep(15);
+
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_1, 0);
+
+ msleep(50);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_1, 1);
+
+ msleep(15);
+ tm6000_read_write_usb (dev, 0xc0, 0x0e, 0x00c2, 0x0008, buf, 2);
+// printk(KERN_INFO "buf %#x %#x \n", buf[0], buf[1]);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_2, 1);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_2, 0);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_2, 1);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_2, 1);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_2, 0);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_2, 1);
+ msleep(15);
}
+ /* hack end */
+
+ msleep(5); /* Just to be conservative */
+ /* Check board version - maybe 10Moons specific */
+ if (dev->dev_type == TM5600) {
+ board=tm6000_get_reg16 (dev, 0x40, 0, 0);
+ if (board >=0) {
+ printk (KERN_INFO "Board version = 0x%04x\n",board);
+ } else {
+ printk (KERN_ERR "Error %i while retrieving board
version\n",board);
+ }
+ }
+
msleep(50);
return 0;
--
Stefan Ringel <stefan.ringel@arcor.de>
next prev parent reply other threads:[~2010-02-03 20:29 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-01 20:20 [PATCH] - tm6000 DVB support Stefan Ringel
2010-02-01 20:35 ` Stefan Ringel
2010-02-01 20:52 ` Devin Heitmueller
2010-02-01 21:23 ` Stefan Ringel
2010-02-01 21:44 ` Devin Heitmueller
2010-02-01 22:00 ` Stefan Ringel
2010-02-01 23:05 ` Mauro Carvalho Chehab
2010-02-02 16:14 ` Stefan Ringel
2010-02-02 16:44 ` Mauro Carvalho Chehab
2010-02-02 17:38 ` Stefan Ringel
2010-02-02 20:05 ` Mauro Carvalho Chehab
2010-02-01 22:52 ` Mauro Carvalho Chehab
2010-02-02 17:24 ` Stefan Ringel
2010-02-02 20:03 ` Mauro Carvalho Chehab
2010-02-02 20:19 ` Stefan Ringel
2010-02-02 20:30 ` Mauro Carvalho Chehab
2010-02-02 20:42 ` Stefan Ringel
2010-02-02 20:52 ` Mauro Carvalho Chehab
2010-02-02 21:11 ` Stefan Ringel
2010-02-03 20:10 ` [PATCH 1/15] - tm6000 build hunk Stefan Ringel
2010-02-03 20:13 ` [PATCH 2/15] - tm6000 add Terratec Cinergy Hybrid XE Stefan Ringel
2010-02-03 20:15 ` [PATCH 3/15] - tm6000 bugfix hunk in init_dev Stefan Ringel
2010-02-03 20:22 ` Mauro Carvalho Chehab
2010-02-03 20:16 ` [PATCH 4/15] - tm6000.h Stefan Ringel
2010-02-03 20:25 ` Mauro Carvalho Chehab
2010-02-03 20:50 ` Stefan Ringel
2010-02-03 20:58 ` Devin Heitmueller
2010-02-03 21:31 ` Mauro Carvalho Chehab
2010-02-03 20:18 ` [PATCH 5/15] - tm6000 bugfix i2c transfer Stefan Ringel
2010-02-03 20:18 ` [PATCH 2/15] - tm6000 add Terratec Cinergy Hybrid XE Mauro Carvalho Chehab
2010-02-03 20:20 ` [PATCH 6/15] - tm6000 bugfix usb transfer in DVB mode Stefan Ringel
2010-02-03 20:22 ` [PATCH 7/15] - tm6000 Stefan Ringel
2010-02-03 20:23 ` [PATCH 2/15] - tm6000 bugfix Stefan Ringel
2010-02-03 20:25 ` [PATCH 9/15] - tm6000 analog digital switch Stefan Ringel
2010-02-03 20:40 ` Mauro Carvalho Chehab
2010-02-03 20:55 ` Stefan Ringel
2010-02-03 21:21 ` Mauro Carvalho Chehab
2010-02-03 20:27 ` [PATCH 2/15] - tm6000 add digital init for tm6010 Stefan Ringel
2010-02-03 20:29 ` Stefan Ringel [this message]
2010-02-03 20:31 ` [PATCH 12/15] - tm6000 bugfix tuner reset time and tuner param Stefan Ringel
2010-02-03 20:52 ` Devin Heitmueller
2010-02-03 21:15 ` Stefan Ringel
2010-02-03 20:36 ` [PATCH 13/15] - xc2028 bugfix for firmware 3.6 -> Zarlink use without shift in DTV8 or DTV78 Stefan Ringel
2010-02-03 20:45 ` Devin Heitmueller
2010-02-03 20:38 ` [PATCH 14/15] - zl10353 Stefan Ringel
2010-02-03 20:49 ` Devin Heitmueller
2010-02-03 21:07 ` Stefan Ringel
2010-02-04 2:43 ` Mauro Carvalho Chehab
2010-02-04 21:12 ` Stefan Ringel
2010-02-05 0:06 ` Mauro Carvalho Chehab
2010-02-03 20:40 ` [PATCH 15/15] - tm6000 hack with different demodulator parameter Stefan Ringel
2010-02-03 20:47 ` Devin Heitmueller
2010-02-03 20:16 ` [PATCH 1/15] - tm6000 build hunk Mauro Carvalho Chehab
2010-02-03 20:17 ` Devin Heitmueller
2010-02-03 21:48 ` Stefan Ringel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B69DC96.1040704@arcor.de \
--to=stefan.ringel@arcor.de \
--cc=dheitmueller@kernellabs.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.