From: Stefan Ringel <stefan.ringel@arcor.de>
To: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: linux-media@vger.kernel.org,
Devin Heitmueller <dheitmueller@kernellabs.com>
Subject: [PATCH 15/15] - tm6000 hack with different demodulator parameter
Date: Wed, 03 Feb 2010 21:40:49 +0100 [thread overview]
Message-ID: <4B69DF51.4020704@arcor.de> (raw)
In-Reply-To: <4B69D8CC.2030008@arcor.de>
signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
--- a/drivers/staging/tm6000/hack.c
+++ b/drivers/staging/tm6000/hack.c
@@ -37,7 +37,6 @@ static inline int tm6000_snd_control_msg(struct
tm6000_core *dev, __u8 request,
static int pseudo_zl10353_pll(struct tm6000_core *tm6000_dev, struct
dvb_frontend_parameters *p)
{
- int ret;
u8 *data = kzalloc(50*sizeof(u8), GFP_KERNEL);
printk(KERN_ALERT "should set frequency %u\n", p->frequency);
@@ -51,7 +50,7 @@ printk(KERN_ALERT "and bandwith %u\n",
p->u.ofdm.bandwidth);
}
// init ZL10353
- data[0] = 0x0b;
+/* data[0] = 0x0b;
ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x501e, 0x00, data,
0x1);
msleep(15);
data[0] = 0x80;
@@ -159,7 +158,7 @@ printk(KERN_ALERT "and bandwith %u\n",
p->u.ofdm.bandwidth);
msleep(15);
data[0] = 0x5a;
ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x651e,
0x00, data, 0x1);
- msleep(15);
+ msleep(15)
data[0] = 0xe9;
ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x661e,
0x00, data, 0x1);
msleep(15);
@@ -189,7 +188,162 @@ printk(KERN_ALERT "and bandwith %u\n",
p->u.ofdm.bandwidth);
msleep(15);
break;
}
-
+*/
+ switch(p->u.ofdm.bandwidth) {
+ case BANDWIDTH_8_MHZ:
+ data[0] = 0x03;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x501e,0,data,1);
+ msleep(40);
+ data[0] = 0x44;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x511e,0,data,1);
+ msleep(40);
+ data[0] = 0x40;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x551e,0,data,1);
+ msleep(40);
+ data[0] = 0x46;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x521e,0,data,1);
+ msleep(40);
+ data[0] = 0x15;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x531e,0,data,1);
+ msleep(40);
+ data[0] = 0x0f;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x541e,0,data,1);
+ msleep(40);
+ data[0] = 0x80;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x551e,0,data,1);
+ msleep(40);
+ data[0] = 0x01;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0xea1e,0,data,1);
+ msleep(40);
+ data[0] = 0x00;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0xea1e,0,data,1);
+ msleep(40);
+ data[0] = 0x8b;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x631e,0,data,1);
+ msleep(40);
+ data[0] = 0x75;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0xcc1e,0,data,1);
+ msleep(40);
+ data[0] = 0xe6; //0x19;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x6c1e,0,data,1);
+ msleep(40);
+ data[0] = 0x09; //0xf7;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x6d1e,0,data,1);
+ msleep(40);
+ data[0] = 0x67;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x651e,0,data,1);
+ msleep(40);
+ data[0] = 0xe5;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x661e,0,data,1);
+ msleep(40);
+ data[0] = 0x75;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x5c1e,0,data,1);
+ msleep(40);
+ data[0] = 0x17;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x5f1e,0,data,1);
+ msleep(40);
+ data[0] = 0x40;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x5e1e,0,data,1);
+ msleep(40);
+ data[0] = 0x01;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x701e,0,data,1);
+ msleep(40);
+ break;
+ case BANDWIDTH_7_MHZ:
+ data[0] = 0x03;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x501e,0,data,1);
+ msleep(40);
+ data[0] = 0x44;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x511e,0,data,1);
+ msleep(40);
+ data[0] = 0x40;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x551e,0,data,1);
+ msleep(40);
+ data[0] = 0x46;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x521e,0,data,1);
+ msleep(40);
+ data[0] = 0x15;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x531e,0,data,1);
+ msleep(40);
+ data[0] = 0x0f;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x541e,0,data,1);
+ msleep(40);
+ data[0] = 0x80;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x551e,0,data,1);
+ msleep(40);
+ data[0] = 0x01;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0xea1e,0,data,1);
+ msleep(40);
+ data[0] = 0x00;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0xea1e,0,data,1);
+ msleep(40);
+ data[0] = 0x83;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x631e,0,data,1);
+ msleep(40);
+ data[0] = 0xa3;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0xcc1e,0,data,1);
+ msleep(40);
+ data[0] = 0xe6; //0x19;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x6c1e,0,data,1);
+ msleep(40);
+ data[0] = 0x09; //0xf7;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x6d1e,0,data,1);
+ msleep(40);
+ data[0] = 0x5a;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x651e,0,data,1);
+ msleep(40);
+ data[0] = 0xe9;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x661e,0,data,1);
+ msleep(40);
+ data[0] = 0x86;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x5c1e,0,data,1);
+ msleep(40);
+ data[0] = 0x17;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x5f1e,0,data,1);
+ msleep(40);
+ data[0] = 0x40;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x5e1e,0,data,1);
+ msleep(40);
+ data[0] = 0x01;
+ tm6000_read_write_usb(tm6000_dev,0x40,0x10,0x701e,0,data,1);
+ msleep(40);
+ break;
+ default:
+ printk(KERN_ALERT "tm6000: bandwidth not supported\n");
+ }
+
+ tm6000_read_write_usb(tm6000_dev,0xc0,0x10,0x051f,0,data,2);
+ printk(KERN_INFO "buf %#x %#x \n", data[0], data[1]);
+ msleep(40);
+
+ tm6000_read_write_usb(tm6000_dev,0xc0,0x10,0x051f,0,data,2);
+ printk(KERN_INFO "buf %#x %#x \n", data[0], data[1]);
+ msleep(40);
+
+ tm6000_read_write_usb(tm6000_dev,0xc0,0x10,0x051f,0,data,2);
+ printk(KERN_INFO "buf %#x %#x \n", data[0], data[1]);
+ msleep(40);
+
+ tm6000_read_write_usb(tm6000_dev,0xc0,0x10,0x051f,0,data,2);
+ printk(KERN_INFO "buf %#x %#x \n", data[0], data[1]);
+ msleep(40);
+
+ tm6000_read_write_usb(tm6000_dev,0xc0,0x10,0x051f,0,data,2);
+ printk(KERN_INFO "buf %#x %#x \n", data[0], data[1]);
+ msleep(40);
+
+ tm6000_read_write_usb(tm6000_dev,0xc0,0x10,0x0f1f,0,data,2);
+ printk(KERN_INFO "buf %#x %#x \n", data[0], data[1]);
+ msleep(40);
+
+ tm6000_read_write_usb(tm6000_dev,0xc0,0x10,0x091f,0,data,2);
+ printk(KERN_INFO "buf %#x %#x \n", data[0], data[1]);
+ msleep(40);
+
+ tm6000_read_write_usb(tm6000_dev,0xc0,0x10,0x0b1f,0,data,2);
+ printk(KERN_INFO "buf %#x %#x \n", data[0], data[1]);
+ msleep(40);
+
kfree(data);
return 0;
--
Stefan Ringel <stefan.ringel@arcor.de>
next prev parent reply other threads:[~2010-02-03 20:41 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-01 20:20 [PATCH] - tm6000 DVB support Stefan Ringel
2010-02-01 20:35 ` Stefan Ringel
2010-02-01 20:52 ` Devin Heitmueller
2010-02-01 21:23 ` Stefan Ringel
2010-02-01 21:44 ` Devin Heitmueller
2010-02-01 22:00 ` Stefan Ringel
2010-02-01 23:05 ` Mauro Carvalho Chehab
2010-02-02 16:14 ` Stefan Ringel
2010-02-02 16:44 ` Mauro Carvalho Chehab
2010-02-02 17:38 ` Stefan Ringel
2010-02-02 20:05 ` Mauro Carvalho Chehab
2010-02-01 22:52 ` Mauro Carvalho Chehab
2010-02-02 17:24 ` Stefan Ringel
2010-02-02 20:03 ` Mauro Carvalho Chehab
2010-02-02 20:19 ` Stefan Ringel
2010-02-02 20:30 ` Mauro Carvalho Chehab
2010-02-02 20:42 ` Stefan Ringel
2010-02-02 20:52 ` Mauro Carvalho Chehab
2010-02-02 21:11 ` Stefan Ringel
2010-02-03 20:10 ` [PATCH 1/15] - tm6000 build hunk Stefan Ringel
2010-02-03 20:13 ` [PATCH 2/15] - tm6000 add Terratec Cinergy Hybrid XE Stefan Ringel
2010-02-03 20:15 ` [PATCH 3/15] - tm6000 bugfix hunk in init_dev Stefan Ringel
2010-02-03 20:22 ` Mauro Carvalho Chehab
2010-02-03 20:16 ` [PATCH 4/15] - tm6000.h Stefan Ringel
2010-02-03 20:25 ` Mauro Carvalho Chehab
2010-02-03 20:50 ` Stefan Ringel
2010-02-03 20:58 ` Devin Heitmueller
2010-02-03 21:31 ` Mauro Carvalho Chehab
2010-02-03 20:18 ` [PATCH 5/15] - tm6000 bugfix i2c transfer Stefan Ringel
2010-02-03 20:18 ` [PATCH 2/15] - tm6000 add Terratec Cinergy Hybrid XE Mauro Carvalho Chehab
2010-02-03 20:20 ` [PATCH 6/15] - tm6000 bugfix usb transfer in DVB mode Stefan Ringel
2010-02-03 20:22 ` [PATCH 7/15] - tm6000 Stefan Ringel
2010-02-03 20:23 ` [PATCH 2/15] - tm6000 bugfix Stefan Ringel
2010-02-03 20:25 ` [PATCH 9/15] - tm6000 analog digital switch Stefan Ringel
2010-02-03 20:40 ` Mauro Carvalho Chehab
2010-02-03 20:55 ` Stefan Ringel
2010-02-03 21:21 ` Mauro Carvalho Chehab
2010-02-03 20:27 ` [PATCH 2/15] - tm6000 add digital init for tm6010 Stefan Ringel
2010-02-03 20:29 ` [PATCH 11/15] - tm6000 add " Stefan Ringel
2010-02-03 20:31 ` [PATCH 12/15] - tm6000 bugfix tuner reset time and tuner param Stefan Ringel
2010-02-03 20:52 ` Devin Heitmueller
2010-02-03 21:15 ` Stefan Ringel
2010-02-03 20:36 ` [PATCH 13/15] - xc2028 bugfix for firmware 3.6 -> Zarlink use without shift in DTV8 or DTV78 Stefan Ringel
2010-02-03 20:45 ` Devin Heitmueller
2010-02-03 20:38 ` [PATCH 14/15] - zl10353 Stefan Ringel
2010-02-03 20:49 ` Devin Heitmueller
2010-02-03 21:07 ` Stefan Ringel
2010-02-04 2:43 ` Mauro Carvalho Chehab
2010-02-04 21:12 ` Stefan Ringel
2010-02-05 0:06 ` Mauro Carvalho Chehab
2010-02-03 20:40 ` Stefan Ringel [this message]
2010-02-03 20:47 ` [PATCH 15/15] - tm6000 hack with different demodulator parameter Devin Heitmueller
2010-02-03 20:16 ` [PATCH 1/15] - tm6000 build hunk Mauro Carvalho Chehab
2010-02-03 20:17 ` Devin Heitmueller
2010-02-03 21:48 ` Stefan Ringel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B69DF51.4020704@arcor.de \
--to=stefan.ringel@arcor.de \
--cc=dheitmueller@kernellabs.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.