From: Stefan Ringel <stefan.ringel@arcor.de>
To: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: linux-media@vger.kernel.org,
Devin Heitmueller <dheitmueller@kernellabs.com>
Subject: [PATCH 13/15] - xc2028 bugfix for firmware 3.6 -> Zarlink use without shift in DTV8 or DTV78
Date: Wed, 03 Feb 2010 21:36:39 +0100 [thread overview]
Message-ID: <4B69DE57.4030509@arcor.de> (raw)
In-Reply-To: <4B69D8CC.2030008@arcor.de>
signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -1114,7 +1122,11 @@ static int xc2028_set_params(struct dvb_frontend *fe,
/* All S-code tables need a 200kHz shift */
if (priv->ctrl.demod) {
- demod = priv->ctrl.demod + 200;
+ if ((priv->ctrl.fname == "xc3028L-v36.fw") && (priv->ctrl.demod
== XC3028_FE_ZARLINK456) && ((type & DTV78) | (type & DTV8)) ) {
+ demod = priv->ctrl.demod;
+ } else {
+ demod = priv->ctrl.demod + 200;
+ }
/*
* The DTV7 S-code table needs a 700 kHz shift.
* Thanks to Terry Wu <terrywu2009@gmail.com> for reporting this
@@ -1123,8 +1135,8 @@ static int xc2028_set_params(struct dvb_frontend *fe,
* use this firmware after initialization, but a tune to a UHF
* channel should then cause DTV78 to be used.
*/
- if (type & DTV7)
- demod += 500;
+ if (type & DTV7)
+ demod += 500;
}
return generic_set_freq(fe, p->frequency,
@@ -1240,6 +1252,10 @@ static const struct dvb_tuner_ops
xc2028_dvb_tuner_ops = {
.get_rf_strength = xc2028_signal,
.set_params = xc2028_set_params,
.sleep = xc2028_sleep,
+#if 0
+ int (*get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth);
+ int (*get_status)(struct dvb_frontend *fe, u32 *status);
+#endif
};
next prev parent reply other threads:[~2010-02-03 20:37 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-01 20:20 [PATCH] - tm6000 DVB support Stefan Ringel
2010-02-01 20:35 ` Stefan Ringel
2010-02-01 20:52 ` Devin Heitmueller
2010-02-01 21:23 ` Stefan Ringel
2010-02-01 21:44 ` Devin Heitmueller
2010-02-01 22:00 ` Stefan Ringel
2010-02-01 23:05 ` Mauro Carvalho Chehab
2010-02-02 16:14 ` Stefan Ringel
2010-02-02 16:44 ` Mauro Carvalho Chehab
2010-02-02 17:38 ` Stefan Ringel
2010-02-02 20:05 ` Mauro Carvalho Chehab
2010-02-01 22:52 ` Mauro Carvalho Chehab
2010-02-02 17:24 ` Stefan Ringel
2010-02-02 20:03 ` Mauro Carvalho Chehab
2010-02-02 20:19 ` Stefan Ringel
2010-02-02 20:30 ` Mauro Carvalho Chehab
2010-02-02 20:42 ` Stefan Ringel
2010-02-02 20:52 ` Mauro Carvalho Chehab
2010-02-02 21:11 ` Stefan Ringel
2010-02-03 20:10 ` [PATCH 1/15] - tm6000 build hunk Stefan Ringel
2010-02-03 20:13 ` [PATCH 2/15] - tm6000 add Terratec Cinergy Hybrid XE Stefan Ringel
2010-02-03 20:15 ` [PATCH 3/15] - tm6000 bugfix hunk in init_dev Stefan Ringel
2010-02-03 20:22 ` Mauro Carvalho Chehab
2010-02-03 20:16 ` [PATCH 4/15] - tm6000.h Stefan Ringel
2010-02-03 20:25 ` Mauro Carvalho Chehab
2010-02-03 20:50 ` Stefan Ringel
2010-02-03 20:58 ` Devin Heitmueller
2010-02-03 21:31 ` Mauro Carvalho Chehab
2010-02-03 20:18 ` [PATCH 5/15] - tm6000 bugfix i2c transfer Stefan Ringel
2010-02-03 20:18 ` [PATCH 2/15] - tm6000 add Terratec Cinergy Hybrid XE Mauro Carvalho Chehab
2010-02-03 20:20 ` [PATCH 6/15] - tm6000 bugfix usb transfer in DVB mode Stefan Ringel
2010-02-03 20:22 ` [PATCH 7/15] - tm6000 Stefan Ringel
2010-02-03 20:23 ` [PATCH 2/15] - tm6000 bugfix Stefan Ringel
2010-02-03 20:25 ` [PATCH 9/15] - tm6000 analog digital switch Stefan Ringel
2010-02-03 20:40 ` Mauro Carvalho Chehab
2010-02-03 20:55 ` Stefan Ringel
2010-02-03 21:21 ` Mauro Carvalho Chehab
2010-02-03 20:27 ` [PATCH 2/15] - tm6000 add digital init for tm6010 Stefan Ringel
2010-02-03 20:29 ` [PATCH 11/15] - tm6000 add " Stefan Ringel
2010-02-03 20:31 ` [PATCH 12/15] - tm6000 bugfix tuner reset time and tuner param Stefan Ringel
2010-02-03 20:52 ` Devin Heitmueller
2010-02-03 21:15 ` Stefan Ringel
2010-02-03 20:36 ` Stefan Ringel [this message]
2010-02-03 20:45 ` [PATCH 13/15] - xc2028 bugfix for firmware 3.6 -> Zarlink use without shift in DTV8 or DTV78 Devin Heitmueller
2010-02-03 20:38 ` [PATCH 14/15] - zl10353 Stefan Ringel
2010-02-03 20:49 ` Devin Heitmueller
2010-02-03 21:07 ` Stefan Ringel
2010-02-04 2:43 ` Mauro Carvalho Chehab
2010-02-04 21:12 ` Stefan Ringel
2010-02-05 0:06 ` Mauro Carvalho Chehab
2010-02-03 20:40 ` [PATCH 15/15] - tm6000 hack with different demodulator parameter Stefan Ringel
2010-02-03 20:47 ` Devin Heitmueller
2010-02-03 20:16 ` [PATCH 1/15] - tm6000 build hunk Mauro Carvalho Chehab
2010-02-03 20:17 ` Devin Heitmueller
2010-02-03 21:48 ` Stefan Ringel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B69DE57.4030509@arcor.de \
--to=stefan.ringel@arcor.de \
--cc=dheitmueller@kernellabs.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.