All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anthony Liguori <anthony@codemonkey.ws>
To: Alex Williamson <alex.williamson@redhat.com>
Cc: chrisw@redhat.com, qemu-devel@nongnu.org, kvm@vger.kernel.org,
	quintela@redhat.com
Subject: Re: [RFC PATCH 5/6] savevm: Migrate RAM based on name/offset
Date: Tue, 08 Jun 2010 15:12:26 -0500	[thread overview]
Message-ID: <4C0EA42A.6000005@codemonkey.ws> (raw)
In-Reply-To: <20100608191633.4451.59848.stgit@localhost.localdomain>

On 06/08/2010 02:16 PM, Alex Williamson wrote:
> Synchronize RAM blocks with the target and migrate using name/offset
> pairs.  This ensures both source and target have the same view of
> RAM and that we get the right bits into the right slot.
>
> Signed-off-by: Alex Williamson<alex.williamson@redhat.com>
> ---
>
>   arch_init.c |  103 +++++++++++++++++++++++++++++++++++++++++++++++++++++------
>   vl.c        |    2 +
>   2 files changed, 93 insertions(+), 12 deletions(-)
>
> diff --git a/arch_init.c b/arch_init.c
> index 6103461..8ba92ec 100644
> --- a/arch_init.c
> +++ b/arch_init.c
> @@ -113,20 +113,29 @@ static int ram_save_block(QEMUFile *f)
>
>       while (addr<  total_ram) {
>           if (cpu_physical_memory_get_dirty(current_addr, MIGRATION_DIRTY_FLAG)) {
> +            RAMBlock *block;
> +            ram_addr_t offset;
>               uint8_t *p;
>
>               cpu_physical_memory_reset_dirty(current_addr,
>                                               current_addr + TARGET_PAGE_SIZE,
>                                               MIGRATION_DIRTY_FLAG);
>
> -            p = qemu_get_ram_ptr(current_addr);
> +            QLIST_FOREACH(block,&ram.blocks, next) {
> +                if (current_addr - block->offset<  block->length)
> +                    break;
> +            }
> +            offset = current_addr - block->offset;
> +            p = block->host + offset;
>
>               if (is_dup_page(p, *p)) {
> -                qemu_put_be64(f, current_addr | RAM_SAVE_FLAG_COMPRESS);
> +                qemu_put_be64(f, offset | RAM_SAVE_FLAG_COMPRESS);
> +                qemu_put_buffer(f, (uint8_t *)block->name, sizeof(block->name));
>                   qemu_put_byte(f, *p);
>    

I think we could use some trickery like use another flag in 
current_address to determine whether this was a different section from 
the previous section and then only encode the section name if that's true.

Regards,

Anthony Liguori

>                   bytes_sent = 1;
>               } else {
> -                qemu_put_be64(f, current_addr | RAM_SAVE_FLAG_PAGE);
> +                qemu_put_be64(f, offset | RAM_SAVE_FLAG_PAGE);
> +                qemu_put_buffer(f, (uint8_t *)block->name, sizeof(block->name));
>                   qemu_put_buffer(f, p, TARGET_PAGE_SIZE);
>                   bytes_sent = TARGET_PAGE_SIZE;
>               }
> @@ -196,6 +205,7 @@ int ram_save_live(Monitor *mon, QEMUFile *f, int stage, void *opaque)
>       }
>
>       if (stage == 1) {
> +        RAMBlock *block;
>           uint64_t total_ram = ram_bytes_total();
>           bytes_transferred = 0;
>
> @@ -210,6 +220,11 @@ int ram_save_live(Monitor *mon, QEMUFile *f, int stage, void *opaque)
>           cpu_physical_memory_set_dirty_tracking(1);
>
>           qemu_put_be64(f, total_ram | RAM_SAVE_FLAG_MEM_SIZE);
> +
> +        QLIST_FOREACH(block,&ram.blocks, next) {
> +            qemu_put_buffer(f, (uint8_t *)block->name, sizeof(block->name));
> +            qemu_put_be64(f, block->length);
> +        }
>       }
>
>       bytes_transferred_last = bytes_transferred;
> @@ -257,7 +272,7 @@ int ram_load(QEMUFile *f, void *opaque, int version_id)
>       ram_addr_t addr;
>       int flags;
>
> -    if (version_id != 3) {
> +    if (version_id<  3) {
>           return -EINVAL;
>       }
>
> @@ -268,23 +283,89 @@ int ram_load(QEMUFile *f, void *opaque, int version_id)
>           addr&= TARGET_PAGE_MASK;
>
>           if (flags&  RAM_SAVE_FLAG_MEM_SIZE) {
> -            if (addr != ram_bytes_total()) {
> -                return -EINVAL;
> +            if (version_id == 3) {
> +                if (addr != ram_bytes_total()) {
> +                    return -EINVAL;
> +                }
> +            } else {
> +                /* Synchronize RAM block list */
> +                char name[64];
> +                ram_addr_t length;
> +                ram_addr_t total_ram_bytes = addr;
> +
> +                while (total_ram_bytes) {
> +                    RAMBlock *block;
> +                    qemu_get_buffer(f, (uint8_t *)name, sizeof(name));
> +                    length = qemu_get_be64(f);
> +
> +                    QLIST_FOREACH(block,&ram.blocks, next) {
> +                        if (!strncmp(name, block->name, sizeof(name))) {
> +                            if (block->length != length)
> +                                return -EINVAL;
> +                            break;
> +                        }
> +                    }
> +
> +                    if (!block) {
> +                        if (!qemu_ram_alloc(name, length))
> +                            return -ENOMEM;
> +                    }
> +
> +                    total_ram_bytes -= length;
> +                }
>               }
>           }
>
>           if (flags&  RAM_SAVE_FLAG_COMPRESS) {
> -            uint8_t ch = qemu_get_byte(f);
> -            memset(qemu_get_ram_ptr(addr), ch, TARGET_PAGE_SIZE);
> +            void *host;
> +            uint8_t ch;
> +
> +            if (version_id == 3) {
> +                host = qemu_get_ram_ptr(addr);
> +            } else {
> +                RAMBlock *block;
> +                char name[64];
> +
> +                qemu_get_buffer(f, (uint8_t *)name, sizeof(name));
> +
> +                QLIST_FOREACH(block,&ram.blocks, next) {
> +                    if (!strncmp(name, block->name, sizeof(name)))
> +                        break;
> +                }
> +                if (!block)
> +                    return -EINVAL;
> +
> +                host = block->host + addr;
> +            }
> +            ch = qemu_get_byte(f);
> +            memset(host, ch, TARGET_PAGE_SIZE);
>   #ifndef _WIN32
>               if (ch == 0&&
>                   (!kvm_enabled() || kvm_has_sync_mmu())) {
> -                madvise(qemu_get_ram_ptr(addr), TARGET_PAGE_SIZE,
> -                        MADV_DONTNEED);
> +                madvise(host, TARGET_PAGE_SIZE, MADV_DONTNEED);
>               }
>   #endif
>           } else if (flags&  RAM_SAVE_FLAG_PAGE) {
> -            qemu_get_buffer(f, qemu_get_ram_ptr(addr), TARGET_PAGE_SIZE);
> +            void *host;
> +
> +            if (version_id == 3) {
> +                host = qemu_get_ram_ptr(addr);
> +            } else {
> +                RAMBlock *block;
> +                char name[64];
> +
> +                qemu_get_buffer(f, (uint8_t *)name, sizeof(name));
> +
> +                QLIST_FOREACH(block,&ram.blocks, next) {
> +                    if (!strncmp(name, block->name, sizeof(name)))
> +                        break;
> +                }
> +                if (!block)
> +                    return -EINVAL;
> +
> +                host = block->host + addr;
> +            }
> +            qemu_get_buffer(f, host, TARGET_PAGE_SIZE);
>           }
>           if (qemu_file_has_error(f)) {
>               return -EIO;
> diff --git a/vl.c b/vl.c
> index 9e9c176..a871895 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -3731,7 +3731,7 @@ int main(int argc, char **argv, char **envp)
>       if (qemu_opts_foreach(&qemu_drive_opts, drive_init_func, machine, 1) != 0)
>           exit(1);
>
> -    register_savevm_live("ram", 0, 3, NULL, ram_save_live, NULL,
> +    register_savevm_live("ram", 0, 4, NULL, ram_save_live, NULL,
>                            ram_load, NULL);
>
>       if (nb_numa_nodes>  0) {
>
>    

WARNING: multiple messages have this Message-ID (diff)
From: Anthony Liguori <anthony@codemonkey.ws>
To: Alex Williamson <alex.williamson@redhat.com>
Cc: chrisw@redhat.com, qemu-devel@nongnu.org, kvm@vger.kernel.org,
	quintela@redhat.com
Subject: [Qemu-devel] Re: [RFC PATCH 5/6] savevm: Migrate RAM based on name/offset
Date: Tue, 08 Jun 2010 15:12:26 -0500	[thread overview]
Message-ID: <4C0EA42A.6000005@codemonkey.ws> (raw)
In-Reply-To: <20100608191633.4451.59848.stgit@localhost.localdomain>

On 06/08/2010 02:16 PM, Alex Williamson wrote:
> Synchronize RAM blocks with the target and migrate using name/offset
> pairs.  This ensures both source and target have the same view of
> RAM and that we get the right bits into the right slot.
>
> Signed-off-by: Alex Williamson<alex.williamson@redhat.com>
> ---
>
>   arch_init.c |  103 +++++++++++++++++++++++++++++++++++++++++++++++++++++------
>   vl.c        |    2 +
>   2 files changed, 93 insertions(+), 12 deletions(-)
>
> diff --git a/arch_init.c b/arch_init.c
> index 6103461..8ba92ec 100644
> --- a/arch_init.c
> +++ b/arch_init.c
> @@ -113,20 +113,29 @@ static int ram_save_block(QEMUFile *f)
>
>       while (addr<  total_ram) {
>           if (cpu_physical_memory_get_dirty(current_addr, MIGRATION_DIRTY_FLAG)) {
> +            RAMBlock *block;
> +            ram_addr_t offset;
>               uint8_t *p;
>
>               cpu_physical_memory_reset_dirty(current_addr,
>                                               current_addr + TARGET_PAGE_SIZE,
>                                               MIGRATION_DIRTY_FLAG);
>
> -            p = qemu_get_ram_ptr(current_addr);
> +            QLIST_FOREACH(block,&ram.blocks, next) {
> +                if (current_addr - block->offset<  block->length)
> +                    break;
> +            }
> +            offset = current_addr - block->offset;
> +            p = block->host + offset;
>
>               if (is_dup_page(p, *p)) {
> -                qemu_put_be64(f, current_addr | RAM_SAVE_FLAG_COMPRESS);
> +                qemu_put_be64(f, offset | RAM_SAVE_FLAG_COMPRESS);
> +                qemu_put_buffer(f, (uint8_t *)block->name, sizeof(block->name));
>                   qemu_put_byte(f, *p);
>    

I think we could use some trickery like use another flag in 
current_address to determine whether this was a different section from 
the previous section and then only encode the section name if that's true.

Regards,

Anthony Liguori

>                   bytes_sent = 1;
>               } else {
> -                qemu_put_be64(f, current_addr | RAM_SAVE_FLAG_PAGE);
> +                qemu_put_be64(f, offset | RAM_SAVE_FLAG_PAGE);
> +                qemu_put_buffer(f, (uint8_t *)block->name, sizeof(block->name));
>                   qemu_put_buffer(f, p, TARGET_PAGE_SIZE);
>                   bytes_sent = TARGET_PAGE_SIZE;
>               }
> @@ -196,6 +205,7 @@ int ram_save_live(Monitor *mon, QEMUFile *f, int stage, void *opaque)
>       }
>
>       if (stage == 1) {
> +        RAMBlock *block;
>           uint64_t total_ram = ram_bytes_total();
>           bytes_transferred = 0;
>
> @@ -210,6 +220,11 @@ int ram_save_live(Monitor *mon, QEMUFile *f, int stage, void *opaque)
>           cpu_physical_memory_set_dirty_tracking(1);
>
>           qemu_put_be64(f, total_ram | RAM_SAVE_FLAG_MEM_SIZE);
> +
> +        QLIST_FOREACH(block,&ram.blocks, next) {
> +            qemu_put_buffer(f, (uint8_t *)block->name, sizeof(block->name));
> +            qemu_put_be64(f, block->length);
> +        }
>       }
>
>       bytes_transferred_last = bytes_transferred;
> @@ -257,7 +272,7 @@ int ram_load(QEMUFile *f, void *opaque, int version_id)
>       ram_addr_t addr;
>       int flags;
>
> -    if (version_id != 3) {
> +    if (version_id<  3) {
>           return -EINVAL;
>       }
>
> @@ -268,23 +283,89 @@ int ram_load(QEMUFile *f, void *opaque, int version_id)
>           addr&= TARGET_PAGE_MASK;
>
>           if (flags&  RAM_SAVE_FLAG_MEM_SIZE) {
> -            if (addr != ram_bytes_total()) {
> -                return -EINVAL;
> +            if (version_id == 3) {
> +                if (addr != ram_bytes_total()) {
> +                    return -EINVAL;
> +                }
> +            } else {
> +                /* Synchronize RAM block list */
> +                char name[64];
> +                ram_addr_t length;
> +                ram_addr_t total_ram_bytes = addr;
> +
> +                while (total_ram_bytes) {
> +                    RAMBlock *block;
> +                    qemu_get_buffer(f, (uint8_t *)name, sizeof(name));
> +                    length = qemu_get_be64(f);
> +
> +                    QLIST_FOREACH(block,&ram.blocks, next) {
> +                        if (!strncmp(name, block->name, sizeof(name))) {
> +                            if (block->length != length)
> +                                return -EINVAL;
> +                            break;
> +                        }
> +                    }
> +
> +                    if (!block) {
> +                        if (!qemu_ram_alloc(name, length))
> +                            return -ENOMEM;
> +                    }
> +
> +                    total_ram_bytes -= length;
> +                }
>               }
>           }
>
>           if (flags&  RAM_SAVE_FLAG_COMPRESS) {
> -            uint8_t ch = qemu_get_byte(f);
> -            memset(qemu_get_ram_ptr(addr), ch, TARGET_PAGE_SIZE);
> +            void *host;
> +            uint8_t ch;
> +
> +            if (version_id == 3) {
> +                host = qemu_get_ram_ptr(addr);
> +            } else {
> +                RAMBlock *block;
> +                char name[64];
> +
> +                qemu_get_buffer(f, (uint8_t *)name, sizeof(name));
> +
> +                QLIST_FOREACH(block,&ram.blocks, next) {
> +                    if (!strncmp(name, block->name, sizeof(name)))
> +                        break;
> +                }
> +                if (!block)
> +                    return -EINVAL;
> +
> +                host = block->host + addr;
> +            }
> +            ch = qemu_get_byte(f);
> +            memset(host, ch, TARGET_PAGE_SIZE);
>   #ifndef _WIN32
>               if (ch == 0&&
>                   (!kvm_enabled() || kvm_has_sync_mmu())) {
> -                madvise(qemu_get_ram_ptr(addr), TARGET_PAGE_SIZE,
> -                        MADV_DONTNEED);
> +                madvise(host, TARGET_PAGE_SIZE, MADV_DONTNEED);
>               }
>   #endif
>           } else if (flags&  RAM_SAVE_FLAG_PAGE) {
> -            qemu_get_buffer(f, qemu_get_ram_ptr(addr), TARGET_PAGE_SIZE);
> +            void *host;
> +
> +            if (version_id == 3) {
> +                host = qemu_get_ram_ptr(addr);
> +            } else {
> +                RAMBlock *block;
> +                char name[64];
> +
> +                qemu_get_buffer(f, (uint8_t *)name, sizeof(name));
> +
> +                QLIST_FOREACH(block,&ram.blocks, next) {
> +                    if (!strncmp(name, block->name, sizeof(name)))
> +                        break;
> +                }
> +                if (!block)
> +                    return -EINVAL;
> +
> +                host = block->host + addr;
> +            }
> +            qemu_get_buffer(f, host, TARGET_PAGE_SIZE);
>           }
>           if (qemu_file_has_error(f)) {
>               return -EIO;
> diff --git a/vl.c b/vl.c
> index 9e9c176..a871895 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -3731,7 +3731,7 @@ int main(int argc, char **argv, char **envp)
>       if (qemu_opts_foreach(&qemu_drive_opts, drive_init_func, machine, 1) != 0)
>           exit(1);
>
> -    register_savevm_live("ram", 0, 3, NULL, ram_save_live, NULL,
> +    register_savevm_live("ram", 0, 4, NULL, ram_save_live, NULL,
>                            ram_load, NULL);
>
>       if (nb_numa_nodes>  0) {
>
>    

  reply	other threads:[~2010-06-08 20:12 UTC|newest]

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-08 19:14 [RFC PATCH 0/6] RAM migration overhaul Alex Williamson
2010-06-08 19:14 ` [Qemu-devel] " Alex Williamson
2010-06-08 19:15 ` [RFC PATCH 1/6] qemu_ram_alloc: Remove duplicate code Alex Williamson
2010-06-08 19:15   ` [Qemu-devel] " Alex Williamson
2010-06-08 21:00   ` Chris Wright
2010-06-08 21:00     ` [Qemu-devel] " Chris Wright
2010-06-08 19:15 ` [RFC PATCH 2/6] ram_blocks: Convert to a QLIST Alex Williamson
2010-06-08 19:15   ` [Qemu-devel] " Alex Williamson
2010-06-08 21:26   ` Chris Wright
2010-06-08 21:26     ` [Qemu-devel] " Chris Wright
2010-06-08 21:45     ` Alex Williamson
2010-06-08 21:45       ` [Qemu-devel] " Alex Williamson
2010-06-08 21:51       ` Chris Wright
2010-06-08 21:51         ` [Qemu-devel] " Chris Wright
2010-06-09  8:19       ` Juan Quintela
2010-06-09  8:19         ` [Qemu-devel] " Juan Quintela
2010-06-09 20:11   ` [Qemu-devel] " Cam Macdonell
2010-06-09 20:11     ` Cam Macdonell
2010-06-09 20:55     ` Alex Williamson
2010-06-09 20:55       ` Alex Williamson
2010-06-09 21:12       ` Yoshiaki Tamura
2010-06-09 21:12         ` Yoshiaki Tamura
2010-06-08 19:15 ` [RFC PATCH 3/6] RAMBlock: Add a name field Alex Williamson
2010-06-08 19:15   ` [Qemu-devel] " Alex Williamson
2010-06-08 20:07   ` Anthony Liguori
2010-06-08 20:07     ` [Qemu-devel] " Anthony Liguori
2010-06-08 20:09     ` Alex Williamson
2010-06-08 20:09       ` [Qemu-devel] " Alex Williamson
2010-06-08 21:41   ` Chris Wright
2010-06-08 21:41     ` [Qemu-devel] " Chris Wright
2010-06-09  3:13     ` Alex Williamson
2010-06-09  3:13       ` [Qemu-devel] " Alex Williamson
2010-06-09 11:55     ` Avi Kivity
2010-06-09 11:55       ` [Qemu-devel] " Avi Kivity
2010-06-09 12:56     ` Paul Brook
2010-06-09 12:56       ` Paul Brook
2010-06-09  2:30   ` [Qemu-devel] " Paul Brook
2010-06-09  2:30     ` Paul Brook
2010-06-09  2:40     ` Anthony Liguori
2010-06-09  2:40       ` Anthony Liguori
2010-06-09  2:54       ` Paul Brook
2010-06-09  2:54         ` Paul Brook
2010-06-09  4:19         ` Alex Williamson
2010-06-09  4:19           ` Alex Williamson
2010-06-09 12:18           ` Paul Brook
2010-06-09 12:18             ` Paul Brook
2010-06-09 16:37             ` Alex Williamson
2010-06-09 16:37               ` Alex Williamson
2010-06-09 20:36               ` Paul Brook
2010-06-09 20:36                 ` Paul Brook
2010-06-10  8:23                 ` Gerd Hoffmann
2010-06-10  8:23                   ` Gerd Hoffmann
2010-06-10 14:33                   ` Alex Williamson
2010-06-10 14:33                     ` Alex Williamson
2010-06-10 14:49                     ` Paul Brook
2010-06-10 14:49                       ` Paul Brook
2010-06-10 15:21                       ` Alex Williamson
2010-06-10 15:21                         ` Alex Williamson
2010-06-11  8:48                         ` Gerd Hoffmann
2010-06-11  8:48                           ` Gerd Hoffmann
2010-06-11 15:50                           ` Alex Williamson
2010-06-11 15:50                             ` Alex Williamson
2010-06-11 16:12                             ` Paul Brook
2010-06-11 16:12                               ` Paul Brook
2010-06-11  8:45                     ` Gerd Hoffmann
2010-06-11  8:45                       ` Gerd Hoffmann
2010-06-10 15:05                 ` Alex Williamson
2010-06-10 15:05                   ` Alex Williamson
2010-06-10 16:40               ` Chris Wright
2010-06-10 16:40                 ` Chris Wright
2010-06-10 16:45                 ` Paul Brook
2010-06-10 16:45                   ` Paul Brook
2010-06-09 11:58         ` Avi Kivity
2010-06-09 11:58           ` Avi Kivity
2010-06-09 13:57           ` Anthony Liguori
2010-06-09 13:57             ` Anthony Liguori
2010-06-09 14:09             ` Paul Brook
2010-06-09 14:09               ` Paul Brook
2010-06-09  7:28       ` Gerd Hoffmann
2010-06-09  7:28         ` Gerd Hoffmann
2010-06-08 19:16 ` [RFC PATCH 4/6] Remove uses of ram.last_offset (aka last_ram_offset) Alex Williamson
2010-06-08 19:16   ` [Qemu-devel] " Alex Williamson
2010-06-08 19:16 ` [RFC PATCH 5/6] savevm: Migrate RAM based on name/offset Alex Williamson
2010-06-08 19:16   ` [Qemu-devel] " Alex Williamson
2010-06-08 20:12   ` Anthony Liguori [this message]
2010-06-08 20:12     ` [Qemu-devel] " Anthony Liguori
2010-06-08 21:12     ` Alex Williamson
2010-06-08 21:12       ` [Qemu-devel] " Alex Williamson
2010-06-08 20:54   ` Chris Wright
2010-06-08 20:54     ` [Qemu-devel] " Chris Wright
2010-06-08 21:22     ` Alex Williamson
2010-06-08 21:22       ` [Qemu-devel] " Alex Williamson
2010-06-08 19:16 ` [RFC PATCH 6/6] savevm: Use RAM blocks for basis of migration Alex Williamson
2010-06-08 19:16   ` [Qemu-devel] " Alex Williamson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C0EA42A.6000005@codemonkey.ws \
    --to=anthony@codemonkey.ws \
    --cc=alex.williamson@redhat.com \
    --cc=chrisw@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.