[lm-sensors] Testing results for Nuvoton W83677HG-I

[lm-sensors] Testing results for Nuvoton W83677HG-I

[Arseny Klimovsky]

Hello list,

I've tested a driver at http://www.roeck-us.net/linux/drivers/w83627ehf/
with my motherboard Intel DH67BL.

I'm not sure what exactly should be tested, I'm most interested in fan 
speeds.
They are correct, values are practically the same like in BIOS.
On my board fan1 is rear fan, fan2 is CPU fan and fan3 is front fan.

-- 
Arseny Klimovsky


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] Testing results for Nuvoton W83677HG-I

[Guenter Roeck]

Hi Arseny,

On Sat, May 21, 2011 at 05:20:43AM -0400, Arseny Klimovsky wrote:
> Hello list,
> 
> I've tested a driver at http://www.roeck-us.net/linux/drivers/w83627ehf/
> with my motherboard Intel DH67BL.
> 
> I'm not sure what exactly should be tested, I'm most interested in fan 
> speeds.
> They are correct, values are practically the same like in BIOS.
> On my board fan1 is rear fan, fan2 is CPU fan and fan3 is front fan.
> 
Fan speed is the most interesting at this point, since I could not test 
that myself.

Thanks a lot for the feedback!

Guenter

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] Testing results for Nuvoton W83677HG-I

[Arseny Klimovsky]

Guenter Roeck пишет:
> Hi Arseny,
>
> On Sat, May 21, 2011 at 05:20:43AM -0400, Arseny Klimovsky wrote:
>> Hello list,
>>
>> I've tested a driver at http://www.roeck-us.net/linux/drivers/w83627ehf/
>> with my motherboard Intel DH67BL.
>>
>> I'm not sure what exactly should be tested, I'm most interested in fan
>> speeds.
>> They are correct, values are practically the same like in BIOS.
>> On my board fan1 is rear fan, fan2 is CPU fan and fan3 is front fan.
>>
> Fan speed is the most interesting at this point, since I could not test
> that myself.
>
> Thanks a lot for the feedback!
>
> Guenter
With this driver I created a configuration for my board. It can be added 
to wiki, but I have some questions:
1. Multiplier for +12V is strange (11), but it gets exactly correct 
results (12.14V switching to 12.23V and back). Can this be correct?
2. Statement "ignore temp5" does not take effect. I see line about "PECI 
Agent 1"

The sensors output with the config:

nct6775-isa-0290
Adapter: ISA adapter
Vcore: +1.06 V (min = +0.60 V, max = +1.60 V)
+12V: +12.14 V (min = +11.09 V, max = +12.94 V)
AVCC: +3.41 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.41 V (min = +2.98 V, max = +3.63 V)
+5V: +5.04 V (min = +4.60 V, max = +5.40 V)
MemV: +1.56 V (min = +0.40 V, max = +2.00 V)
PCHV: +1.06 V (min = +0.60 V, max = +1.60 V)
3VSB: +3.39 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.28 V (min = +2.70 V, max = +3.30 V)
Rear fan: 727 RPM (min = 251 RPM, div = 32)
CPU fan: 917 RPM (min = 251 RPM, div = 32)
Front fan: 740 RPM (min = 251 RPM, div = 32)
VR temp: +35.0°C (high = +90.0°C, hyst = +75.0°C) sensor = diode
CPU temp: +35.5°C (high = +93.0°C, hyst = +75.0°C) sensor = diode
Memory DIMM temp: +34.5°C (high = +90.0°C, hyst = +75.0°C) sensor = diode
PCH temp: +47.0°C
PECI Agent 1: +0.0°C (high = +80.0°C, hyst = +75.0°C)

The configuration:

# Created for board DH67BL using information from Inte Desktop Utilities 
and BIOS
# "FRONT" and "REAR" fan labels correspond to the motherboard
# headers, but not necessarily the actual fan locations.

chip "nct6775-isa-0290"

# Fans
label fan1 "Rear fan"
set fan1_min 250 # From IDU

label fan2 "CPU fan"
set fan2_min 250 # From IDU

label fan3 "Front fan"
set fan3_min 250 # From IDU

# There is no fan4 on the board
ignore fan4

# Voltages

# Processor Vcc
label in0 "Vcore"
set in0_min 0.6 # From IDU
set in0_max 1.6 # From IDU

# This should be "12 Volts", but computations are strange
label in1 "+12V"
compute in1 11*@, @/11
set in1_min 11.1 # From IDU
set in1_max 12.9 # From IDU

# AVCC(?) - Not shown in BIOS or IDU
label in2 "AVCC"
set in2_min 3.0 # same as +3.3V
set in2_max 3.6 # same as +3.3V

# +3.3 Volts
label in3 "+3.3V"
set in3_min 3.0 # from IDU
set in3_max 3.6 # from IDU

# +5 Volts
label in4 "+5V"
compute in4 5*@, @/5
set in4_min 4.6 # from IDU
set in4_max 5.4 # from IDU

# Memory Vcc ("SDRAM Vcc" in IDU)
label in5 "MemV"
compute in5 1.5*@, @/1.5
set in5_min 0.4 # from IDU
set in5_max 2.0 # from IDU

# PCH Vcc
label in6 "PCHV"
set in6_min 0.6 # from IDU
set in6_max 1.6 # from IDU

# +3.3 Volt Standby
label in7 "3VSB"
set in7_min 3.0 # from IDU
set in7_max 3.6 # from IDU

# VBAT(?) - Not shown in BIOS or IDU
label in8 "Vbat"

# It shows +2.050 V, seems to be not used
ignore cpu0_vid

# Temperatures

# Labeled as "SYSTIN"
# Guess!
label temp1 "VR temp"
set temp1_max 90 # From IDU
set temp1_max_hyst 75
# Labeled as "CPUTIN"
label temp2 "CPU temp"
set temp2_max 93 # From IDU
set temp2_max_hyst 75
# Labeled as "PECI Agent 0"
# Guess!
label temp3 "Memory DIMM temp"
set temp3_max 90 # From IDU
set temp3_max_hyst 75
# Labeled as "PCH_CHIP_TEMP"
label temp4 "PCH temp"

# Labeled as "PECI Agent 1"
# Not used
ignore temp5

-- 
Arseny Klimovsky



_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] Testing results for Nuvoton W83677HG-I

[Jean Delvare]

On Sun, 29 May 2011 17:47:18 +0400, Arseny Klimovsky wrote:
> With this driver I created a configuration for my board. It can be added 
> to wiki, but I have some questions:
> 1. Multiplier for +12V is strange (11), but it gets exactly correct 
> results (12.14V switching to 12.23V and back). Can this be correct?

It is perfectly possible, yes.

> 2. Statement "ignore temp5" does not take effect. I see line about "PECI 
> Agent 1"

Maybe it's not temp5 but temp6 or more. Try "sensors -u" to find out
the right number.

-- 
Jean Delvare

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] Testing results for Nuvoton W83677HG-I

[Arseny Klimovsky]

[-- Attachment #1: Type: text/plain, Size: 671 bytes --]

Jean Delvare пишет:
> On Sun, 29 May 2011 17:47:18 +0400, Arseny Klimovsky wrote:
>> 2. Statement "ignore temp5" does not take effect. I see line about "PECI
>> Agent 1"
> Maybe it's not temp5 but temp6 or more. Try "sensors -u" to find out
> the right number.
Thank you, Jean!
I've tried temp5..7 and no results. But with "sensors -u" it figured out 
to be temp8 :)

I think the configuration can now be added to wiki, I've attached the file.
According to the message
http://lists.lm-sensors.org/pipermail/lm-sensors/2011-March/031775.html
this confguration can be used for DH67CL board, possibly with very small 
changes.

-- 
Arseny Klimovsky


[-- Attachment #2: DH67BL.conf --]
[-- Type: text/plain, Size: 2052 bytes --]


# Created for board DH67BL using information from Inte Desktop Utilities and BIOS
# "FRONT" and "REAR" fan labels correspond to the motherboard
# headers, but not necessarily the actual fan locations.

chip "nct6775-isa-0290"

# Fans
        label fan1 "Rear fan"
        set fan1_min 250 # From IDU

        label fan2 "CPU fan"
        set fan2_min 250 # From IDU

        label fan3 "Front fan"
        set fan3_min 250 # From IDU

	# There is no fan4 on the board
	ignore fan4

# Voltages

	# Processor Vcc
	label	in0		"Vcore"
	set	in0_min 	0.6 # From IDU
	set	in0_max 	1.6 # From IDU
	
	# This should be "12 Volts", but computations are strange
	label	in1		"+12V"
	compute	in1		11*@, @/11
	set	in1_min		11.1 # From IDU
	set	in1_max		12.9 # From IDU

	# AVCC(?) - Not shown in BIOS or IDU
	label	in2		"AVCC"
	set	in2_min		3.0		# same as +3.3V
	set	in2_max		3.6		# same as +3.3V

	# +3.3 Volts
	label	in3		"+3.3V"
	set	in3_min		3.0		# from IDU
	set	in3_max		3.6		# from IDU

	# +5 Volts
	label	in4		"+5V"
	compute	in4		5*@, @/5
	set	in4_min		4.6		# from IDU
	set	in4_max		5.4		# from IDU

	# Memory Vcc ("SDRAM Vcc" in IDU)
	label	in5		"MemV"
	compute	in5		1.5*@, @/1.5
	set	in5_min		0.4		# from IDU
	set	in5_max		2.0		# from IDU

	# PCH Vcc
	label	in6		"PCHV"
	set	in6_min		0.6		# from IDU
	set	in6_max		1.6		# from IDU

	# +3.3 Volt Standby
	label	in7		"3VSB"
	set	in7_min		3.0		# from IDU
	set	in7_max		3.6		# from IDU

	# VBAT(?) - Not shown in BIOS or IDU
	label	in8		"Vbat"

	# It shows +2.050 V, seems to be not used
	ignore	cpu0_vid

#	Temperatures

	# Labeled as "SYSTIN"
	# Guess!
	label	temp1		"VR temp"
	set	temp1_max 	90		# From IDU
	set	temp1_max_hyst 	75		# From IDU
	# Labeled as "CPUTIN"
	label	temp2		"CPU temp"
	set	temp2_max 	93		# From IDU
	set	temp2_max_hyst 	75		# From IDU
	# Labeled as "PECI Agent 0"
	# Guess!
	label	temp3		"Memory DIMM temp"
	set	temp3_max 	90		# From IDU
	set	temp3_max_hyst 	75		# From IDU
	# Labeled as "PCH_CHIP_TEMP"
	label	temp4		"PCH temp"

	# Labeled as "PECI Agent 1"
	# Not used
	ignore	temp8


[-- Attachment #3: Type: text/plain, Size: 153 bytes --]

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] Testing results for Nuvoton W83677HG-I

[Jean Delvare]

On Sun, 29 May 2011 23:49:02 +0400, Arseny Klimovsky wrote:
> Jean Delvare пишет:
> > On Sun, 29 May 2011 17:47:18 +0400, Arseny Klimovsky wrote:
> >> 2. Statement "ignore temp5" does not take effect. I see line about "PECI
> >> Agent 1"
> > Maybe it's not temp5 but temp6 or more. Try "sensors -u" to find out
> > the right number.
> Thank you, Jean!
> I've tried temp5..7 and no results. But with "sensors -u" it figured out 
> to be temp8 :)
> 
> I think the configuration can now be added to wiki, I've attached the file.
> According to the message
> http://lists.lm-sensors.org/pipermail/lm-sensors/2011-March/031775.html
> this confguration can be used for DH67CL board, possibly with very small 
> changes.

Added to the wiki:
http://www.lm-sensors.org/wiki/Configurations/Intel/DH67BL

Thanks for your contribution!

-- 
Jean Delvare

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors