* nouveau Ignoring invalid EDID block 1
@ 2011-06-15 10:24 zaverel
[not found] ` <4DF88862.9030609-GANU6spQydw@public.gmane.org>
0 siblings, 1 reply; 7+ messages in thread
From: zaverel @ 2011-06-15 10:24 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1: Type: text/plain, Size: 1162 bytes --]
Hello ,
All is fine except i can't change resolution on my second monitor vga
,tv in fact,
(reported as DVI-I-2 ) anymore with my 9400gt.
Now , i'm on :
linux-2.6.39-gentoo-r1
xorg-server-1.10.2
xf86-video-nouveau-0.0.16_pre20110323
libdrm-2.4.25
Errors in dmesg are:
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
whatever i valid with xrandr is not really do on my tv
although xrandr say it's good , my tv always report 1202x670 50hz
I tried with and without xorg.conf
My last kernel working is linux-2.6.36-gentoo-r6.
see you.
[-- Attachment #2: dmesg_log --]
[-- Type: text/plain, Size: 66020 bytes --]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.39-gentoo-r1 (root@funky64) (gcc version 4.5.2 (Gentoo 4.5.2 p1.0, pie-0.4.5) ) #1 SMP PREEMPT Fri Jun 10 17:18:16 CEST 2011
Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-gentoo-r1 root=/dev/sda1 ro rootfstype=ext4 log_buf_len=1M
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f680000 (usable)
BIOS-e820: 000000007f680000 - 000000007f698000 (ACPI data)
BIOS-e820: 000000007f698000 - 000000007f6dc000 (ACPI NVS)
BIOS-e820: 000000007f6dc000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.5 present.
DMI: System manufacturer System Product Name/P6T, BIOS 1303 03/08/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7f680 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F700000 mask FFFF00000 uncachable
2 base 07F800000 mask FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000099000] 99000 size 20480
init_memory_mapping: 0000000000000000-000000007f680000
0000000000 - 007f600000 page 2M
007f600000 - 007f680000 page 4k
kernel direct mapping tables up to 7f680000 @ 7f67c000-7f680000
ACPI: RSDP 00000000000fad60 00024 (v02 ACPIAM)
ACPI: XSDT 000000007f680100 0005C (v01 030810 XSDT1026 20100308 MSFT 00000097)
ACPI: FACP 000000007f680290 000F4 (v03 030810 FACP1026 20100308 MSFT 00000097)
ACPI: DSDT 000000007f6804b0 0C466 (v01 A1146 A1146001 00000001 INTL 20060113)
ACPI: FACS 000000007f698000 00040
ACPI: APIC 000000007f680390 000D8 (v01 030810 APIC1026 20100308 MSFT 00000097)
ACPI: MCFG 000000007f680470 0003C (v01 030810 OEMMCFG 20100308 MSFT 00000097)
ACPI: OEMB 000000007f698040 00072 (v01 030810 OEMB1026 20100308 MSFT 00000097)
ACPI: HPET 000000007f68f4b0 00038 (v01 030810 OEMHPET 20100308 MSFT 00000097)
ACPI: OSFR 000000007f68f4f0 000B0 (v01 030810 OEMOSFR 20100308 MSFT 00000097)
ACPI: SSDT 000000007f69a330 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007f680000
NUMA: Using 63 for the hash shift.
Initmem setup node 0 0000000000000000-000000007f680000
NODE_DATA [000000007f677000 - 000000007f67bfff]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007ce00000-ffff88007e9fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x0007f680
On node 0 totalpages: 521742
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 7079 pages used for memmap
DMA32 zone: 510681 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88007f400000 s73984 r8192 d24320 u131072
pcpu-alloc: s73984 r8192 d24320 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 514602
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-gentoo-r1 root=/dev/sda1 ro rootfstype=ext4 log_buf_len=1M
log_buf_len: 1048576
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2049216k/2087424k available (3300k kernel code, 456k absent, 37752k reserved, 1930k data, 576k init)
Preemptable hierarchical RCU implementation.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:1280
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration failed
TSC: PIT calibration matches HPET. 1 loops
Detected 2672.820 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.64 BogoMIPS (lpj=2672820)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110316
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#4
smpboot cpu 4: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#5
smpboot cpu 5: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#6
smpboot cpu 6: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#7
smpboot cpu 7: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (42972.15 BogoMIPS).
PM: Registering ACPI NVS region at 7f698000 (278528 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000007f6980c0 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: SSDT 000000007f699cd0 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
pci 0000:00:14.3: [8086:3438] type 0 class 0x000800
pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f]
pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f]
pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xf7fff000-0xf7fff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: [8086:3a44] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f]
pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f]
pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xf7ffe000-0xf7ffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0xac00-0xac07]
pci 0000:00:1f.2: reg 14: [io 0xa880-0xa883]
pci 0000:00:1f.2: reg 18: [io 0xa800-0xa807]
pci 0000:00:1f.2: reg 1c: [io 0xa480-0xa483]
pci 0000:00:1f.2: reg 20: [io 0xa400-0xa41f]
pci 0000:00:1f.2: reg 24: [mem 0xf7ffc000-0xf7ffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xf7ffd000-0xf7ffd0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: [10de:0641] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xcc00-0xcc7f]
pci 0000:02:00.0: reg 30: [mem 0xfbc80000-0xfbcfffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:05:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit]
pci 0000:05:00.0: reg 20: [mem 0xf6ef0000-0xf6efffff 64bit pref]
pci 0000:05:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 05-05]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
pci 0000:04:00.0: [197b:2363] type 0 class 0x000101
pci 0000:04:00.0: reg 24: [mem 0xfbdfe000-0xfbdfffff]
pci 0000:04:00.0: reg 30: [mem 0xfbde0000-0xfbdeffff pref]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: [197b:2363] type 0 class 0x000101
pci 0000:04:00.1: reg 10: [io 0xdc00-0xdc07]
pci 0000:04:00.1: reg 14: [io 0xd880-0xd883]
pci 0000:04:00.1: reg 18: [io 0xd800-0xd807]
pci 0000:04:00.1: reg 1c: [io 0xd480-0xd483]
pci 0000:04:00.1: reg 20: [io 0xd400-0xd40f]
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
reserve RAM buffer: 000000007f680000 - 000000007fffffff
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #5
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #4
Switched to NOHz mode on CPU #6
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #7
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x7ff00000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfbf00000-0xfbffffff]
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xfec8a000-0xfec8afff]
pnp 00:01: [mem 0xfed10000-0xfed10fff]
system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0290-0x029f]
system 00:06: [io 0x0290-0x029f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x004d]
pnp 00:07: [io 0x0050-0x005f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x0800-0x087f]
pnp 00:07: [io 0x0400-0x03ff disabled]
pnp 00:07: [io 0x0500-0x057f]
pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
pnp 00:07: [mem 0xfed20000-0xfed3ffff]
pnp 00:07: [mem 0xfed40000-0xfed8ffff]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [mem 0xffa00000-0xffbfffff]
pnp 00:09: [mem 0xffe00000-0xffffffff]
pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0a: [mem 0xffc00000-0xffdfffff]
system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x0060]
pnp 00:0b: [io 0x0064]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xe0000000-0xefffffff]
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x000c0000-0x000cffff]
pnp 00:0d: [mem 0x000e0000-0x000fffff]
pnp 00:0d: [mem 0x00100000-0x7fefffff]
pnp 00:0d: [mem 0xfed90000-0xffffffff]
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0x7fefffff] could not be reserved
system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.4: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.0: BAR 8: assigned [mem 0x80200000-0x805fffff]
pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x80200000-0x805fffff]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 05-05]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07-07]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbcfffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0x80200000-0x805fffff]
pci_bus 0000:06: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:05: resource 2 [mem 0xf6e00000-0xf6efffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0x7ff00000-0xdfffffff]
pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 256 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1307729773.687:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4002
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 65 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 66 for MSI/MSI-X
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: irq 67 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc100 irq 67
ata2: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc180 irq 67
ata3: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc200 irq 67
ata4: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc280 irq 67
ata5: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc300 irq 67
ata6: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc380 irq 67
ahci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:04:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16
ata8: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16
pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_jmicron 0000:04:00.1: setting latency timer to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata9.00: HPA detected: current 398294975, native 398297088
ata9.00: ATA-7: Maxtor 6B200P0, BAH41BM0, max UDMA/133
ata9.00: 398294975 sectors, multi 0: LBA48
ata9.00: configured for UDMA/100
ata1: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
Refined TSC clocksource calibration: 2672.727 MHz.
Switching to clocksource tsc
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: HPA detected: current 321670847, native 321672960
ata5.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133
ata5.00: 321670847 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 321670847 512-byte logical blocks: (164 GB/153 GiB)
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 4:0:0:0: [sda] Attached SCSI disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata6.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 8:0:0:0: Direct-Access ATA Maxtor 6B200P0 BAH4 PQ: 0 ANSI: 5
sd 8:0:0:0: [sdc] 398294975 512-byte logical blocks: (203 GB/189 GiB)
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 8:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1 sdb2 sdb3
sd 5:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 576k freed
udevd[1833]: starting version 171
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:05:00.0: setting latency timer to 64
r8169 0000:05:00.0: irq 68 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168c/8111c at 0xffffc90010a60000, e0:cb:4e:81:62:dd, XID 1c4000c0 IRQ 68
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
[drm] Initialized drm 1.1.0 20060810
usb 5-1: new full speed USB device number 2 using uhci_hcd
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 69 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 3 ports detected
nouveau 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x096080c1)
[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
hda_codec: ALC1200: BIOS auto-probing.
usb 6-2: new full speed USB device number 2 using uhci_hcd
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 62.94.4b.00
[drm] nouveau 0000:02:00.0: TMDS table version 2.0
[drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030
[drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02021342 00020030
[drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD20A
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD657
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE6A7
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE7F0
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEA5C
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEAC1
[drm] nouveau 0000:02:00.0: 0xEAC1: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:02:00.0: 1 available performance level(s)
[drm] nouveau 0000:02:00.0: 3: memory 333MHz core 550MHz shader 1375MHz fanspeed 100%
[drm] nouveau 0000:02:00.0: c: memory 399MHz core 400MHz shader 800MHz
[TTM] Zone kernel: Available graphics memory: 1024896 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:02:00.0: Detected 512MiB VRAM
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
usb 7-1: new full speed USB device number 2 using uhci_hcd
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
usb 5-1.1: new full speed USB device number 3 using uhci_hcd
lirc_dev: IR Remote Control driver registered, major 251
IR LIRC bridge handler initialized
IR keymap rc-rc6-mce not found
Registered IR keymap rc-empty
input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/rc/rc0/input2
rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/rc/rc0
rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
mceusb 7-1:1.0: Registered Philips eHome Infrared Transceiver on usb7:2
usbcore: registered new interface driver mceusb
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.1/5-1.1:1.0/input/input3
generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1a.2-1.1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 5-1.2: new full speed USB device number 4 using uhci_hcd
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.2/5-1.2:1.0/input/input4
generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1a.2-1.2/input0
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm] nouveau 0000:02:00.0: allocated 1680x1050 fb: 0x40000000, bo ffff880078fc6800
fbcon: nouveaufb (fb0) is primary device
usb 5-1.3: new full speed USB device number 5 using uhci_hcd
Console: switching to colour frame buffer device 160x45
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usb 6-2.1: new low speed USB device number 3 using uhci_hcd
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
usb 5-1.1: input irq status -75 received
usb 5-1.1: input irq status -75 received
usb 5-1.1: input irq status -75 received
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.0/input/input5
generic-usb 0003:046D:C226.0003: input,hidraw2: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1d.0-2.1/input0
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.1/input/input6
generic-usb 0003:046D:C226.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:1d.0-2.1/input1
usb 6-2.3: new low speed USB device number 4 using uhci_hcd
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.3/6-2.3:1.0/input/input7
generic-usb 0003:045E:0039.0005: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2.3/input0
usb 6-2.4: new full speed USB device number 5 using uhci_hcd
input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.4/6-2.4:1.0/input/input8
generic-usb 0003:046D:C227.0006: input,hiddev0,hidraw5: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1d.0-2.4/input0
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdc1): using internal journal
EXT3-fs (sdc1): mounted filesystem with writeback data mode
input: G15 Extra Keys as /devices/virtual/input/input9
Adding 971928k swap on /dev/sda2. Priority:-1 extents:1 across:971928k
r8169 0000:05:00.0: eth0: link down
r8169 0000:05:00.0: eth0: link down
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Registering the id_resolver key type
r8169 0000:05:00.0: eth0: link up
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
coretemp coretemp.0: TjMax is 97 C.
coretemp coretemp.1: TjMax is 97 C.
coretemp coretemp.2: TjMax is 97 C.
coretemp coretemp.3: TjMax is 97 C.
w83627ehf: Found W83667HG chip at 0x290
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[-- Attachment #3: xrandr_log --]
[-- Type: text/plain, Size: 9310 bytes --]
Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 8192 x 8192
DVI-I-1 connected 1680x1050+0+0 (0x63) normal (normal left inverted right x axis y axis) 473mm x 296mm
Identifier: 0x61
Timestamp: 301673
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff00047274ad70096064
2e100103e82f1e782ec585a459499a24
125054bfef0081808140714f9500950f
b30081c08bc021399030621a274068b0
3600d9281100001c000000fd00384c1e
5210000a202020202020000000fc0041
63657220414c32323136570a000000ff
004c373430393034363338323020002f
dithering: Off
supported: Off On Automatic
scaling mode: Full
supported: None Full Center Full aspect
select subconnector: Automatic
supported: Automatic DVI-D DVI-A
subconnector: DVI-D
supported: Unknown DVI-D DVI-A
1680x1050 (0x63) 146.2MHz -HSync +VSync *current +preferred
h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.3KHz
v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz
1280x1024 (0x64) 135.0MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz
1280x1024 (0x65) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1440x900 (0x66) 136.8MHz -HSync +VSync
h: width 1440 start 1536 end 1688 total 1936 skew 0 clock 70.6KHz
v: height 900 start 903 end 909 total 942 clock 75.0Hz
1440x900 (0x67) 106.5MHz -HSync +VSync
h: width 1440 start 1520 end 1672 total 1904 skew 0 clock 55.9KHz
v: height 900 start 903 end 909 total 934 clock 59.9Hz
1280x960 (0x68) 108.0MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz
v: height 960 start 961 end 964 total 1000 clock 60.0Hz
1360x768 (0x69) 84.8MHz -HSync +VSync
h: width 1366 start 1431 end 1567 total 1776 skew 0 clock 47.7KHz
v: height 768 start 771 end 781 total 798 clock 59.8Hz
1152x864 (0x6a) 108.0MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1280x720 (0x6b) 74.4MHz -HSync +VSync
h: width 1280 start 1336 end 1472 total 1664 skew 0 clock 44.7KHz
v: height 720 start 721 end 724 total 746 clock 60.0Hz
1024x768 (0x6c) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x6d) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x6e) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
832x624 (0x6f) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x70) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x71) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x72) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x73) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x74) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 491 total 520 clock 72.8Hz
640x480 (0x75) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x76) 30.2MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz
v: height 480 start 483 end 486 total 525 clock 66.7Hz
640x480 (0x77) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0x78) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
DVI-I-2 connected 1280x720+1680+0 (0x79) normal (normal left inverted right x axis y axis) 708mm x 398mm
Identifier: 0x62
Timestamp: 301673
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 1
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff0008ab333261b90b03
310f01030e4628782a3f44a654469924
13484bbfee0001010101010101010101
010101010101011d00bc52d01e20b828
5540c48e2100001e000000fd00384c1f
3d08000a202020202020000000ff0035
32353030303030300a202020000000fc
0042454b4f2d564a415a310a2020006d
dithering: Off
supported: Off On Automatic
scaling mode: Full
supported: None Full Center Full aspect
select subconnector: Automatic
supported: Automatic DVI-D DVI-A
subconnector: DVI-A
supported: Unknown DVI-D DVI-A
1280x720 (0x79) 74.2MHz +HSync +VSync *current +preferred
h: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.5KHz
v: height 720 start 725 end 730 total 750 clock 50.0Hz
1024x768 (0x6c) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x6d) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x6e) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
832x624 (0x6f) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x70) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x71) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x72) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x73) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x74) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 491 total 520 clock 72.8Hz
640x480 (0x75) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x76) 30.2MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz
v: height 480 start 483 end 486 total 525 clock 66.7Hz
640x480 (0x77) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0x78) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
[-- Attachment #4: Type: text/plain, Size: 181 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: nouveau Ignoring invalid EDID block 1
[not found] ` <4DF88862.9030609-GANU6spQydw@public.gmane.org>
@ 2011-06-15 13:44 ` Emil Velikov
2011-06-15 15:02 ` zaverel
2011-06-15 15:32 ` zaverel
0 siblings, 2 replies; 7+ messages in thread
From: Emil Velikov @ 2011-06-15 13:44 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW, zaverel
So let see if I got this correct
Desktop card with 2 monitors connected to it
1 - Default monitor connected via DVI
2 - Second monitor (TV actually), via VGA
Even though xrandr reports display 2 to have resolution set to
1280x720 50hz, the display itself reports 1202x670 50hz
When you say linux-2.6.36-gentoo-r6, can you please state the
commit (or tag) it is based on
Before you were able to set the resolution of the TV, but
now you cannot - any messages? (either on TV or logs)
Was the TV being detected correctly before - same resolution via
xrandr and tv info?
Was the connection of the TV incorrectly being detected before
- VGA .. DVI?
Whereas for the "ERROR Raw EDID..." message my guess is that the
TV does not manage to provide the data fast enough or the connection
(cable/connectors) are not in good working order
Can you provide is the same logs but for the working kernel
Cheers
On Wed, 15 Jun 2011 11:24:34 +0100, zaverel <zaverel-GANU6spQydw@public.gmane.org> wrote:
> Hello ,
>
> All is fine except i can't change resolution on my second monitor vga
> ,tv in fact,
> (reported as DVI-I-2 ) anymore with my 9400gt.
>
>
>
> Now , i'm on :
>
> linux-2.6.39-gentoo-r1
> xorg-server-1.10.2
> xf86-video-nouveau-0.0.16_pre20110323
> libdrm-2.4.25
>
> Errors in dmesg are:
>
> nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
> [drm:drm_edid_block_valid] *ERROR* Raw EDID:
> <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
>
>
>
>
> whatever i valid with xrandr is not really do on my tv
> although xrandr say it's good , my tv always report 1202x670 50hz
>
> I tried with and without xorg.conf
>
> My last kernel working is linux-2.6.36-gentoo-r6.
>
> see you.
>
>
>
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: nouveau Ignoring invalid EDID block 1
2011-06-15 13:44 ` Emil Velikov
@ 2011-06-15 15:02 ` zaverel
2011-06-15 15:32 ` zaverel
1 sibling, 0 replies; 7+ messages in thread
From: zaverel @ 2011-06-15 15:02 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1: Type: text/plain, Size: 1705 bytes --]
hello
Le 15/06/2011 15:44, Emil Velikov a écrit :
> So let see if I got this correct
>
> Desktop card with 2 monitors connected to it
>
> 1 - Default monitor connected via DVI
> 2 - Second monitor (TV actually), via VGA
>
Yes
> Even though xrandr reports display 2 to have resolution set to
> 1280x720 50hz, the display itself reports 1202x670 50hz
yes
>
> When you say linux-2.6.36-gentoo-r6, can you please state the
> commit (or tag) it is based on
I made a little mistake , it's linux-2.6.36-gentoo-r8 and it's the last
kernel 2.6.36 from gentoo
>
> Before you were able to set the resolution of the TV, but
> now you cannot - any messages? (either on TV or logs)
Yes, with linux-2.6.36-gentoo-r8 , i'm able to set the resolution of the TV,
but with any newer kernel , i can't.
>
> Was the TV being detected correctly before - same resolution via
> xrandr and tv info?
yes
> Was the connection of the TV incorrectly being detected before
> - VGA .. DVI?
no
>
> Whereas for the "ERROR Raw EDID..." message my guess is that the
> TV does not manage to provide the data fast enough or the connection
> (cable/connectors) are not in good working order
when i'll find another cable, i try.
>
> Can you provide is the same logs but for the working kernel
done
>
> Cheers
>
>
ps:
To be clear, i have to use a modeline to get 1280x720 in xorg.conf
Without it ,tv stay at 1024x768 60hz.
with the nvidia it was the same :
put a modeline and use this:
Option "ModeValidation" "AllowNon60HzDFPModes , NoEdidMaxPClkCheck ,
NoHorizSyncCheck , NoVertRefreshCheck , NoDFPNativeResolutionCheck ,
NoEdidModes "
See you
[-- Attachment #2: dmesg_log --]
[-- Type: text/plain, Size: 63278 bytes --]
Initializing cgroup subsys cpuset
Linux version 2.6.36-gentoo-r8 (root@funky64) (gcc version 4.5.2 (Gentoo 4.5.2 p1.0, pie-0.4.5) ) #1 SMP PREEMPT Wed Jun 15 16:28:57 CEST 2011
Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-gentoo-r8 root=/dev/sda1 ro rootfstype=ext4 acpi_enforce_resources=lax video=DVI-I-1:1024x768@75 log_buf_len=1M
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f680000 (usable)
BIOS-e820: 000000007f680000 - 000000007f698000 (ACPI data)
BIOS-e820: 000000007f698000 - 000000007f6dc000 (ACPI NVS)
BIOS-e820: 000000007f6dc000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.5 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7f680 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F700000 mask FFFF00000 uncachable
2 base 07F800000 mask FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
init_memory_mapping: 0000000000000000-000000007f680000
0000000000 - 007f600000 page 2M
007f600000 - 007f680000 page 4k
kernel direct mapping tables up to 7f680000 @ 16000-1a000
ACPI: RSDP 00000000000fad60 00024 (v02 ACPIAM)
ACPI: XSDT 000000007f680100 0005C (v01 030810 XSDT1026 20100308 MSFT 00000097)
ACPI: FACP 000000007f680290 000F4 (v03 030810 FACP1026 20100308 MSFT 00000097)
ACPI: DSDT 000000007f6804b0 0C466 (v01 A1146 A1146001 00000001 INTL 20060113)
ACPI: FACS 000000007f698000 00040
ACPI: APIC 000000007f680390 000D8 (v01 030810 APIC1026 20100308 MSFT 00000097)
ACPI: MCFG 000000007f680470 0003C (v01 030810 OEMMCFG 20100308 MSFT 00000097)
ACPI: OEMB 000000007f698040 00072 (v01 030810 OEMB1026 20100308 MSFT 00000097)
ACPI: HPET 000000007f68f4b0 00038 (v01 030810 OEMHPET 20100308 MSFT 00000097)
ACPI: OSFR 000000007f68f4f0 000B0 (v01 030810 OEMOSFR 20100308 MSFT 00000097)
ACPI: SSDT 000000007f69a330 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007f680000
Initmem setup node 0 0000000000000000-000000007f680000
NODE_DATA [00000000015ef2c0 - 00000000015f42bf]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x0007f680
On node 0 totalpages: 521742
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3926 pages, LIFO batch:0
DMA32 zone: 7079 pages used for memmap
DMA32 zone: 510681 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 64
early_res array is doubled to 64 at [18000 - 187ff]
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff880001800000 s77248 r8192 d21056 u131072
early_res array is doubled to 128 at [18800 - 197ff]
pcpu-alloc: s77248 r8192 d21056 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 514607
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-gentoo-r8 root=/dev/sda1 ro rootfstype=ext4 acpi_enforce_resources=lax video=DVI-I-1:1024x768@75 log_buf_len=1M
log_buf_len: 1048576
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (60 early reservations)
#1 [0001000000 - 00015eeb30] TEXT DATA BSS
#2 [00015ef000 - 00015ef288] BRK
#3 [00000ff790 - 0000100000] BIOS reserved
#4 [00000ff780 - 00000ff790] MP-table mpf
#5 [000009ec00 - 00000e49e0] BIOS reserved
#6 [00000e4b7c - 00000ff780] BIOS reserved
#7 [00000e49e0 - 00000e4b7c] MP-table mpc
#8 [0000010000 - 0000012000] TRAMPOLINE
#9 [0000012000 - 0000016000] ACPI WAKEUP
#10 [0000016000 - 0000018000] PGTABLE
#11 [00015ef2c0 - 00015f42c0] NODE_DATA
#12 [00015f42c0 - 00015f52c0] BOOTMEM
#13 [00015eeb40 - 00015eec40] BOOTMEM
#14 [0001df6000 - 0001df7000] BOOTMEM
#15 [0001df7000 - 0001df8000] BOOTMEM
#16 [0001e00000 - 0003a00000] MEMMAP 0
#17 [00015eec40 - 00015eedc0] BOOTMEM
#18 [00015f52c0 - 00016012c0] BOOTMEM
#19 [0001602000 - 0001603000] BOOTMEM
#20 [00015eedc0 - 00015eee01] BOOTMEM
#21 [00015eee40 - 00015eeec6] BOOTMEM
#22 [00016012c0 - 00016014f0] BOOTMEM
#23 [00015eef00 - 00015eef68] BOOTMEM
#24 [00015eef80 - 00015eefe8] BOOTMEM
#25 [0001601500 - 0001601568] BOOTMEM
#26 [0001601580 - 00016015e8] BOOTMEM
#27 [0001601600 - 0001601668] BOOTMEM
#28 [0001601680 - 00016016e8] BOOTMEM
#29 [0001601700 - 0001601768] BOOTMEM
#30 [0001601780 - 00016017e8] BOOTMEM
#31 [0001601800 - 0001601868] BOOTMEM
#32 [0001601880 - 00016018a0] BOOTMEM
#33 [00016018c0 - 0001601950] BOOTMEM
#34 [0001601980 - 0001601a10] BOOTMEM
#35 [0001800000 - 000181a000] BOOTMEM
#36 [0001820000 - 000183a000] BOOTMEM
#37 [0001840000 - 000185a000] BOOTMEM
#38 [0001860000 - 000187a000] BOOTMEM
#39 [0001880000 - 000189a000] BOOTMEM
#40 [00018a0000 - 00018ba000] BOOTMEM
#41 [00018c0000 - 00018da000] BOOTMEM
#42 [00018e0000 - 00018fa000] BOOTMEM
#43 [0001900000 - 000191a000] BOOTMEM
#44 [0001920000 - 000193a000] BOOTMEM
#45 [0001940000 - 000195a000] BOOTMEM
#46 [0001960000 - 000197a000] BOOTMEM
#47 [0001980000 - 000199a000] BOOTMEM
#48 [00019a0000 - 00019ba000] BOOTMEM
#49 [00019c0000 - 00019da000] BOOTMEM
#50 [00019e0000 - 00019fa000] BOOTMEM
#51 [0001601a40 - 0001601a48] BOOTMEM
#52 [0001601a80 - 0001601a88] BOOTMEM
#53 [0001601ac0 - 0001601b00] BOOTMEM
#54 [0001601b00 - 0001601b80] BOOTMEM
#55 [0001601b80 - 0001601c90] BOOTMEM
#56 [0001601cc0 - 0001601d08] BOOTMEM
#57 [0001601d40 - 0001601d88] BOOTMEM
#58 [0001603000 - 0001703000] BOOTMEM
#59 [0001703000 - 000170b000] BOOTMEM
Memory: 2049380k/2087424k available (3171k kernel code, 456k absent, 37588k reserved, 1895k data, 548k init)
Hierarchical RCU implementation.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:1280
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2672.278 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5344.55 BogoMIPS (lpj=2672278)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20100702
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
#2
NMI watchdog enabled, takes one hw-pmu counter.
#3
NMI watchdog enabled, takes one hw-pmu counter.
#4
NMI watchdog enabled, takes one hw-pmu counter.
#5
NMI watchdog enabled, takes one hw-pmu counter.
#6
NMI watchdog enabled, takes one hw-pmu counter.
#7
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (43345.02 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000007f6980c0 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: SSDT 000000007f699cd0 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f]
pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f]
pci 0000:00:1a.7: reg 10: [mem 0xf7fff000-0xf7fff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f]
pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f]
pci 0000:00:1d.7: reg 10: [mem 0xf7ffe000-0xf7ffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
pci 0000:00:1f.2: reg 10: [io 0xac00-0xac07]
pci 0000:00:1f.2: reg 14: [io 0xa880-0xa883]
pci 0000:00:1f.2: reg 18: [io 0xa800-0xa807]
pci 0000:00:1f.2: reg 1c: [io 0xa480-0xa483]
pci 0000:00:1f.2: reg 20: [io 0xa400-0xa41f]
pci 0000:00:1f.2: reg 24: [mem 0xf7ffc000-0xf7ffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf7ffd000-0xf7ffd0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xcc00-0xcc7f]
pci 0000:02:00.0: reg 30: [mem 0xfbc80000-0xfbcfffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:05:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit]
pci 0000:05:00.0: reg 20: [mem 0xf6ef0000-0xf6efffff 64bit pref]
pci 0000:05:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 05-05]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
pci 0000:04:00.0: reg 24: [mem 0xfbdfe000-0xfbdfffff]
pci 0000:04:00.0: reg 30: [mem 0xfbde0000-0xfbdeffff pref]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [io 0xdc00-0xdc07]
pci 0000:04:00.1: reg 14: [io 0xd880-0xd883]
pci 0000:04:00.1: reg 18: [io 0xd800-0xd807]
pci 0000:04:00.1: reg 1c: [io 0xd480-0xd483]
pci 0000:04:00.1: reg 20: [io 0xd400-0xd40f]
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
reserve RAM buffer: 000000007f680000 - 000000007fffffff
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:06: [io 0x0290-0x029f] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0500-0x057f] could not be reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0x7fefffff] could not be reserved
system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
pci 0000:00:1c.0: BAR 8: assigned [mem 0x7ff00000-0x802fffff]
pci 0000:00:1c.4: BAR 9: assigned [mem 0x80300000-0x804fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x7ff00000-0x802fffff]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 05-05]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge window [mem 0x80300000-0x804fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07-07]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbcfffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0x7ff00000-0x802fffff]
pci_bus 0000:06: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:05: resource 2 [mem 0xf6e00000-0xf6efffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 2 [mem 0x80300000-0x804fffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0x7ff00000-0xdfffffff]
pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 256 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1308155493.664:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4002
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: irq 64 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc100 irq 64
ata2: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc180 irq 64
ata3: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc200 irq 64
ata4: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc280 irq 64
ata5: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc300 irq 64
ata6: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc380 irq 64
ahci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:04:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16
ata8: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16
pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_jmicron 0000:04:00.1: setting latency timer to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata9.00: HPA detected: current 398294975, native 398297088
ata9.00: ATA-7: Maxtor 6B200P0, BAH41BM0, max UDMA/133
ata9.00: 398294975 sectors, multi 0: LBA48
ata9.00: configured for UDMA/100
ata1: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: HPA detected: current 321670847, native 321672960
ata5.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133
ata5.00: 321670847 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 321670847 512-byte logical blocks: (164 GB/153 GiB)
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 4:0:0:0: [sda] Attached SCSI disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata6.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] Write Protect is off
scsi 8:0:0:0: Direct-Access ATA Maxtor 6B200P0 BAH4 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:0:0: [sdc] 398294975 512-byte logical blocks: (203 GB/189 GiB)
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 8:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1 sdb2 sdb3
sd 5:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 548k freed
<30>udevd[1795]: starting version 171
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f 64bit window disabled]
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:05:00.0: setting latency timer to 64
r8169 0000:05:00.0: irq 65 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168c/8111c at 0xffffc9000037e000, e0:cb:4e:81:62:dd, XID 1c4000c0 IRQ 65
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
[drm] Initialized drm 1.1.0 20060810
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 66 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 5-1: new full speed USB device using uhci_hcd and address 2
nouveau 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x096080c1)
[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 62.94.4b.00
[drm] nouveau 0000:02:00.0: TMDS table version 2.0
[drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030
[drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02021342 00020030
[drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD20A
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD657
hda_codec: ALC1200: BIOS auto-probing.
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE6A7
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE7F0
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEA5C
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEAC1
hub 5-1:1.0: USB hub found
[drm] nouveau 0000:02:00.0: 0xEAC1: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:02:00.0: Detected 512MiB VRAM
hub 5-1:1.0: 3 ports detected
[TTM] Zone kernel: Available graphics memory: 1024964 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:02:00.0: Allocating FIFO number 1
usb 6-2: new full speed USB device using uhci_hcd and address 2
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
usb 7-1: new full speed USB device using uhci_hcd and address 2
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
usb 5-1.1: new full speed USB device using uhci_hcd and address 3
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
lirc_dev: IR Remote Control driver registered, major 251
IR LIRC bridge handler initialized
[drm] nouveau 0000:02:00.0: allocated 1024x768 fb: 0x40240000, bo ffff88007df8b800
fbcon: nouveaufb (fb0) is primary device
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
Console: switching to colour frame buffer device 128x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
IR keymap rc-rc6-mce not found
Registered IR keymap rc-empty
input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/virtual/rc/rc0/input2
rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/virtual/rc/rc0
rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
mceusb 7-1:1.0: Registered Philips eHome Infrared Transceiver on usb7:2
usbcore: registered new interface driver mceusb
usbcore: registered new interface driver hiddev
input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.1/5-1.1:1.0/input/input3
generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1a.2-1.1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 5-1.2: new full speed USB device using uhci_hcd and address 4
input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.2/5-1.2:1.0/input/input4
generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1a.2-1.2/input0
usb 5-1.3: new full speed USB device using uhci_hcd and address 5
vboxdrv: Found 8 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa048c560
vboxdrv: fAsync=0 offMin=0x5bc offMax=0x346e4
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.8 (interface 0x00180000).
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
usb 6-2.1: new low speed USB device using uhci_hcd and address 3
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.0/input/input5
generic-usb 0003:046D:C226.0003: input,hidraw2: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1d.0-2.1/input0
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.1/input/input6
generic-usb 0003:046D:C226.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:1d.0-2.1/input1
usb 6-2.3: new low speed USB device using uhci_hcd and address 4
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.3/6-2.3:1.0/input/input7
generic-usb 0003:045E:0039.0005: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2.3/input0
usb 6-2.4: new full speed USB device using uhci_hcd and address 5
input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.4/6-2.4:1.0/input/input8
generic-usb 0003:046D:C227.0006: input,hiddev0,hidraw5: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1d.0-2.4/input0
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdc1): using internal journal
EXT3-fs (sdc1): mounted filesystem with writeback data mode
input: G15 Extra Keys as /devices/virtual/input/input9
Adding 971928k swap on /dev/sda2. Priority:-1 extents:1 across:971928k
r8169 0000:05:00.0: eth0: link up
r8169 0000:05:00.0: eth0: link up
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
usb 5-1.1: input irq status -75 received
usb 5-1.1: input irq status -75 received
usb 5-1.1: input irq status -75 received
coretemp coretemp.0: TjMax is 97 C.
coretemp coretemp.1: TjMax is 97 C.
coretemp coretemp.2: TjMax is 97 C.
coretemp coretemp.3: TjMax is 97 C.
[drm] nouveau 0000:02:00.0: unknown parameter 15
[drm] nouveau 0000:02:00.0: unknown parameter 15
[drm] nouveau 0000:02:00.0: unknown parameter 16
w83627ehf: Found W83667HG chip at 0x290
ACPI: resource w83627ehf [io 0x0295-0x0296] conflicts with ACPI region HWRE [mem 0x00000290-0x00000299 pref window disabled]
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
ACPI: 'USB6' and 'USB5' have the same GPE, can't disable/enable one separately
ACPI: 'USB5' and 'USB6' have the same GPE, can't disable/enable one separately
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
[drm] nouveau 0000:02:00.0: Allocating FIFO number 2
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2
[drm] nouveau 0000:02:00.0: unknown parameter 15
[drm] nouveau 0000:02:00.0: Allocating FIFO number 3
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 3
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[drm] nouveau 0000:02:00.0: unknown parameter 15
[drm] nouveau 0000:02:00.0: Allocating FIFO number 4
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 4
[drm] nouveau 0000:02:00.0: nouveau_channel_free: freeing fifo 4
[drm] nouveau 0000:02:00.0: unknown parameter 15
[drm] nouveau 0000:02:00.0: Allocating FIFO number 4
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 4
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
[-- Attachment #3: xrandr_log --]
[-- Type: text/plain, Size: 7410 bytes --]
Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 8192 x 8192
DVI-I-1 connected 1680x1050+0+0 (0x63) normal (normal left inverted right x axis y axis) 473mm x 296mm
Identifier: 0x61
Timestamp: 16530
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff00047274ad70096064
2e100103e82f1e782ec585a459499a24
125054bfef0081808140714f9500950f
b30081c08bc021399030621a274068b0
3600d9281100001c000000fd00384c1e
5210000a202020202020000000fc0041
63657220414c32323136570a000000ff
004c373430393034363338323020002f
dithering: Off
supported: Off On Automatic
scaling mode: Full
supported: None Full Center Full aspect
select subconnector: Automatic
supported: Automatic DVI-D DVI-A
subconnector: DVI-D
supported: Unknown DVI-D DVI-A
1680x1050 (0x63) 146.2MHz -HSync +VSync *current +preferred
h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.3KHz
v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz
1280x1024 (0x64) 135.0MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz
1280x1024 (0x65) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1440x900 (0x66) 136.8MHz -HSync +VSync
h: width 1440 start 1536 end 1688 total 1936 skew 0 clock 70.6KHz
v: height 900 start 903 end 909 total 942 clock 75.0Hz
1440x900 (0x67) 106.5MHz -HSync +VSync
h: width 1440 start 1520 end 1672 total 1904 skew 0 clock 55.9KHz
v: height 900 start 903 end 909 total 934 clock 59.9Hz
1280x960 (0x68) 108.0MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz
v: height 960 start 961 end 964 total 1000 clock 60.0Hz
1360x768 (0x69) 84.8MHz -HSync +VSync
h: width 1366 start 1431 end 1567 total 1776 skew 0 clock 47.7KHz
v: height 768 start 771 end 781 total 798 clock 59.8Hz
1152x864 (0x6a) 108.0MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1280x720 (0x6b) 74.4MHz -HSync +VSync
h: width 1280 start 1336 end 1472 total 1664 skew 0 clock 44.7KHz
v: height 720 start 721 end 724 total 746 clock 60.0Hz
1024x768 (0x6c) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x6d) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x6e) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
832x624 (0x6f) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x70) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x71) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x72) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x73) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x74) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 491 total 520 clock 72.8Hz
640x480 (0x75) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x76) 30.2MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz
v: height 480 start 483 end 486 total 525 clock 66.7Hz
640x480 (0x77) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0x78) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
DVI-I-2 connected 1280x720+1680+0 (0x79) normal (normal left inverted right x axis y axis) 0mm x 0mm
Identifier: 0x62
Timestamp: 16530
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 1
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
dithering: Off
supported: Off On Automatic
scaling mode: Full
supported: None Full Center Full aspect
select subconnector: Automatic
supported: Automatic DVI-D DVI-A
subconnector: DVI-A
supported: Unknown DVI-D DVI-A
1280x720 (0x79) 95.8MHz -HSync +VSync *current +preferred
h: width 1280 start 1360 end 1488 total 1696 skew 0 clock 56.5KHz
v: height 720 start 723 end 728 total 755 clock 74.8Hz
1024x768 (0x6e) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
800x600 (0x72) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x73) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
848x480 (0x7a) 33.8MHz +HSync +VSync
h: width 848 start 864 end 976 total 1088 skew 0 clock 31.0KHz
v: height 480 start 486 end 494 total 517 clock 60.0Hz
640x480 (0x7b) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 489 end 492 total 525 clock 59.9Hz
[-- Attachment #4: xorg.conf --]
[-- Type: text/plain, Size: 1529 bytes --]
# external DVI with DisplaySize and preferred mode overriden
Section "Monitor"
Identifier "DVI-I-2"
Option "RightOf" "DVI-I-1"
# HorizSync 31.0 - 82.0
# VertRefresh 56.0 - 76.0
##DisplaySize 374 296 ##304 228
# 1360x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 84.72 MHz
## Modeline "1360x768" 84.72 1360 1424 1568 1776 768 769 772 795 -HSync +Vsync
# 1280x720 @ 75.00 Hz (GTF) hsync: 56.40 kHz; pclk: 95.65 MHz
# Modeline "1280x720" 95.65 1280 1352 1488 1696 720 721 724 752 -HSync +Vsync
# 1280x720 74.78 Hz (CVT 0.92M9) hsync: 56.46 kHz; pclk: 95.75 MHz
Modeline "1280x720" 95.75 1280 1360 1488 1696 720 723 728 755 -hsync +vsync
### Option "PreferredMode" "1360x768"
Option "PreferredMode" "1280x720"
EndSection
Section "Monitor"
Identifier "DVI-I-1"
#DisplaySize 374 296 #304 228
# 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz
# Modeline "1680x1050" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync
Option "PreferredMode" "1680x1050"
EndSection
Section "Device"
Identifier "gforce7"
Driver "nouveau"
# BusID "PCI:5:0:0"
Option "GLXVBlank" "on"
Option "ModeDebug" "On"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "gforce7"
DefaultDepth 24
SubSection "Display"
Depth 24
# big virtual screen to place
Modes "1680x1050" "1280x720" ##"1360x768"
EndSubSection
EndSection
[-- Attachment #5: Type: text/plain, Size: 181 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: nouveau Ignoring invalid EDID block 1
2011-06-15 13:44 ` Emil Velikov
2011-06-15 15:02 ` zaverel
@ 2011-06-15 15:32 ` zaverel
[not found] ` <4DF8D09C.5070704-GANU6spQydw@public.gmane.org>
1 sibling, 1 reply; 7+ messages in thread
From: zaverel @ 2011-06-15 15:32 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1: Type: text/plain, Size: 2497 bytes --]
Hello
For error like :
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
If i do
parse-edid
/sys/devices/pci0000\:00/0000:00:03.0/0000:02:00.0/drm/card0/card0-DVI-I-2/edid
the result is :
parse-edid: parse-edid version 2.0.0
parse-edid: EDID checksum passed.
# EDID version 1 revision 3
Section "Monitor"
# Block type: 2:0 3:fd
# Block type: 2:0 3:ff
# Block type: 2:0 3:fc
Identifier "BEKO-VJAZ1"
VendorName "BEK"
ModelName "BEKO-VJAZ1"
# Block type: 2:0 3:fd
HorizSync 31-61
VertRefresh 56-76
# Max dot clock (video bandwidth) 80 MHz
# Block type: 2:0 3:ff
# Block type: 2:0 3:fc
# DPMS capabilities: Active off:yes Suspend:no Standby:no
Mode "1280x720" # vfreq 50.000Hz, hfreq 37.500kHz
DotClock 74.250000
HTimings 1280 1464 1504 1980
VTimings 720 725 730 750
Flags "+HSync" "+VSync"
EndMode
# Block type: 2:0 3:fd
# Block type: 2:0 3:ff
# Block type: 2:0 3:fc
EndSection
So i think edid is good but block 1 do not and the entire edid is
considere invalid
Now, i tweak drm_edid.c from kernel-2.6.39-gentoo-r1 like this:
--- drm_edid.c 2011-06-10 22:37:36.605848000 +0200
+++ linux/drivers/gpu/drm/drm_edid.c 2011-06-13 13:04:43.136786102 +0200
@@ -292,7 +292,7 @@
block + (valid_extensions + 1) * EDID_LENGTH,
j, EDID_LENGTH))
goto out;
- if (drm_edid_block_valid(block + (valid_extensions + 1) *
EDID_LENGTH)) {
+ if (drm_edid_block_valid(block + (valid_extensions + 0) *
EDID_LENGTH)) {
valid_extensions++;
break;
}
and that work good like before but i'm not sure that is safe.
see you
[-- Attachment #2: dmesg_log --]
[-- Type: text/plain, Size: 47596 bytes --]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.39-edid-r1 (root@funky64) (gcc version 4.5.2 (Gentoo 4.5.2 p1.0, pie-0.4.5) ) #1 SMP PREEMPT Wed Jun 15 16:24:41 CEST 2011
Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-edid-r1 root=/dev/sda1 ro rootfstype=ext4 acpi_enforce_resources=lax video=DVI-I-1:1024x768@75 log_buf_len=1M
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f680000 (usable)
BIOS-e820: 000000007f680000 - 000000007f698000 (ACPI data)
BIOS-e820: 000000007f698000 - 000000007f6dc000 (ACPI NVS)
BIOS-e820: 000000007f6dc000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.5 present.
DMI: System manufacturer System Product Name/P6T, BIOS 1303 03/08/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7f680 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F700000 mask FFFF00000 uncachable
2 base 07F800000 mask FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000099000] 99000 size 20480
init_memory_mapping: 0000000000000000-000000007f680000
0000000000 - 007f600000 page 2M
007f600000 - 007f680000 page 4k
kernel direct mapping tables up to 7f680000 @ 7f67c000-7f680000
ACPI: RSDP 00000000000fad60 00024 (v02 ACPIAM)
ACPI: XSDT 000000007f680100 0005C (v01 030810 XSDT1026 20100308 MSFT 00000097)
ACPI: FACP 000000007f680290 000F4 (v03 030810 FACP1026 20100308 MSFT 00000097)
ACPI: DSDT 000000007f6804b0 0C466 (v01 A1146 A1146001 00000001 INTL 20060113)
ACPI: FACS 000000007f698000 00040
ACPI: APIC 000000007f680390 000D8 (v01 030810 APIC1026 20100308 MSFT 00000097)
ACPI: MCFG 000000007f680470 0003C (v01 030810 OEMMCFG 20100308 MSFT 00000097)
ACPI: OEMB 000000007f698040 00072 (v01 030810 OEMB1026 20100308 MSFT 00000097)
ACPI: HPET 000000007f68f4b0 00038 (v01 030810 OEMHPET 20100308 MSFT 00000097)
ACPI: OSFR 000000007f68f4f0 000B0 (v01 030810 OEMOSFR 20100308 MSFT 00000097)
ACPI: SSDT 000000007f69a330 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007f680000
NUMA: Using 63 for the hash shift.
Initmem setup node 0 0000000000000000-000000007f680000
NODE_DATA [000000007f677000 - 000000007f67bfff]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007ce00000-ffff88007e9fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x0007f680
On node 0 totalpages: 521742
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 7079 pages used for memmap
DMA32 zone: 510681 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88007f400000 s73984 r8192 d24320 u131072
pcpu-alloc: s73984 r8192 d24320 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 514602
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-edid-r1 root=/dev/sda1 ro rootfstype=ext4 acpi_enforce_resources=lax video=DVI-I-1:1024x768@75 log_buf_len=1M
log_buf_len: 1048576
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2049216k/2087424k available (3300k kernel code, 456k absent, 37752k reserved, 1930k data, 576k init)
Preemptable hierarchical RCU implementation.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:1280
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2673.123 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5346.24 BogoMIPS (lpj=2673123)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110316
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#4
smpboot cpu 4: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#5
smpboot cpu 5: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#6
smpboot cpu 6: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#7
smpboot cpu 7: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (42972.76 BogoMIPS).
PM: Registering ACPI NVS region at 7f698000 (278528 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000007f6980c0 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: SSDT 000000007f699cd0 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
pci 0000:00:14.3: [8086:3438] type 0 class 0x000800
pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f]
pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f]
pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xf7fff000-0xf7fff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: [8086:3a44] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f]
pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f]
pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xf7ffe000-0xf7ffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0xac00-0xac07]
pci 0000:00:1f.2: reg 14: [io 0xa880-0xa883]
pci 0000:00:1f.2: reg 18: [io 0xa800-0xa807]
pci 0000:00:1f.2: reg 1c: [io 0xa480-0xa483]
pci 0000:00:1f.2: reg 20: [io 0xa400-0xa41f]
pci 0000:00:1f.2: reg 24: [mem 0xf7ffc000-0xf7ffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xf7ffd000-0xf7ffd0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: [10de:0641] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xcc00-0xcc7f]
pci 0000:02:00.0: reg 30: [mem 0xfbc80000-0xfbcfffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:05:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit]
pci 0000:05:00.0: reg 20: [mem 0xf6ef0000-0xf6efffff 64bit pref]
pci 0000:05:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 05-05]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
pci 0000:04:00.0: [197b:2363] type 0 class 0x000101
pci 0000:04:00.0: reg 24: [mem 0xfbdfe000-0xfbdfffff]
pci 0000:04:00.0: reg 30: [mem 0xfbde0000-0xfbdeffff pref]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: [197b:2363] type 0 class 0x000101
pci 0000:04:00.1: reg 10: [io 0xdc00-0xdc07]
pci 0000:04:00.1: reg 14: [io 0xd880-0xd883]
pci 0000:04:00.1: reg 18: [io 0xd800-0xd807]
pci 0000:04:00.1: reg 1c: [io 0xd480-0xd483]
pci 0000:04:00.1: reg 20: [io 0xd400-0xd40f]
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
reserve RAM buffer: 000000007f680000 - 000000007fffffff
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #4
Switched to NOHz mode on CPU #6
Switched to NOHz mode on CPU #7
Switched to NOHz mode on CPU #5
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #3
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x7ff00000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfbf00000-0xfbffffff]
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xfec8a000-0xfec8afff]
pnp 00:01: [mem 0xfed10000-0xfed10fff]
system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0290-0x029f]
system 00:06: [io 0x0290-0x029f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x004d]
pnp 00:07: [io 0x0050-0x005f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x0800-0x087f]
pnp 00:07: [io 0x0400-0x03ff disabled]
pnp 00:07: [io 0x0500-0x057f]
pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
pnp 00:07: [mem 0xfed20000-0xfed3ffff]
pnp 00:07: [mem 0xfed40000-0xfed8ffff]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [mem 0xffa00000-0xffbfffff]
pnp 00:09: [mem 0xffe00000-0xffffffff]
pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0a: [mem 0xffc00000-0xffdfffff]
system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x0060]
pnp 00:0b: [io 0x0064]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xe0000000-0xefffffff]
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x000c0000-0x000cffff]
pnp 00:0d: [mem 0x000e0000-0x000fffff]
pnp 00:0d: [mem 0x00100000-0x7fefffff]
pnp 00:0d: [mem 0xfed90000-0xffffffff]
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0x7fefffff] could not be reserved
system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.4: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.0: BAR 8: assigned [mem 0x80200000-0x805fffff]
pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x80200000-0x805fffff]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 05-05]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07-07]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbcfffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0x80200000-0x805fffff]
pci_bus 0000:06: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:05: resource 2 [mem 0xf6e00000-0xf6efffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0x7ff00000-0xdfffffff]
pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 256 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1308157993.688:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4002
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 65 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 66 for MSI/MSI-X
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: irq 67 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc100 irq 67
ata2: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc180 irq 67
ata3: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc200 irq 67
ata4: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc280 irq 67
ata5: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc300 irq 67
ata6: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc380 irq 67
ahci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:04:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16
ata8: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16
pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_jmicron 0000:04:00.1: setting latency timer to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata9.00: HPA detected: current 398294975, native 398297088
ata9.00: ATA-7: Maxtor 6B200P0, BAH41BM0, max UDMA/133
ata9.00: 398294975 sectors, multi 0: LBA48
ata9.00: configured for UDMA/100
ata1: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
Refined TSC clocksource calibration: 2672.726 MHz.
Switching to clocksource tsc
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: HPA detected: current 321670847, native 321672960
ata5.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133
ata5.00: 321670847 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 321670847 512-byte logical blocks: (164 GB/153 GiB)
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 4:0:0:0: [sda] Attached SCSI disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata6.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 8:0:0:0: Direct-Access ATA Maxtor 6B200P0 BAH4 PQ: 0 ANSI: 5
sd 8:0:0:0: [sdc] 398294975 512-byte logical blocks: (203 GB/189 GiB)
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 8:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1 sdb2 sdb3
sd 5:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 576k freed
udevd[1833]: starting version 171
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
rtc_cmos 00:03: RTC can wake from S4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
r8169 0000:05:00.0: setting latency timer to 64
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
r8169 0000:05:00.0: irq 68 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168c/8111c at 0xffffc90010a5c000, e0:cb:4e:81:62:dd, XID 1c4000c0 IRQ 68
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
[drm] Initialized drm 1.1.0 20060810
usb 5-1: new full speed USB device number 2 using uhci_hcd
nouveau 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x096080c1)
[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 3 ports detected
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 62.94.4b.00
[drm] nouveau 0000:02:00.0: TMDS table version 2.0
[drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030
[drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02021342 00020030
[drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD20A
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD657
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE6A7
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE7F0
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEA5C
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEAC1
[drm] nouveau 0000:02:00.0: 0xEAC1: Condition still not met after 20ms, skipping following opcodes
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 69 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: 1 available performance level(s)
[drm] nouveau 0000:02:00.0: 3: memory 333MHz core 550MHz shader 1375MHz fanspeed 100%
[drm] nouveau 0000:02:00.0: c: memory 399MHz core 400MHz shader 800MHz
[TTM] Zone kernel: Available graphics memory: 1024896 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:02:00.0: Detected 512MiB VRAM
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
hda_codec: ALC1200: BIOS auto-probing.
usb 6-2: new full speed USB device number 2 using uhci_hcd
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID invalid.
[drm] nouveau 0000:02:00.0: allocated 1024x768 fb: 0x40000000, bo ffff88007ab48800
fbcon: nouveaufb (fb0) is primary device
usb 7-1: new full speed USB device number 2 using uhci_hcd
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
Console: switching to colour frame buffer device 128x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
usb 5-1.1: new full speed USB device number 3 using uhci_hcd
lirc_dev: IR Remote Control driver registered, major 251
IR LIRC bridge handler initialized
IR keymap rc-rc6-mce not found
Registered IR keymap rc-empty
input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/rc/rc0/input2
rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/rc/rc0
rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
mceusb 7-1:1.0: Registered Philips eHome Infrared Transceiver on usb7:2
usbcore: registered new interface driver mceusb
input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.1/5-1.1:1.0/input/input3
generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1a.2-1.1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 5-1.2: new full speed USB device number 4 using uhci_hcd
input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.2/5-1.2:1.0/input/input4
generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1a.2-1.2/input0
usb 5-1.3: new full speed USB device number 5 using uhci_hcd
vboxdrv: Found 8 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa049f560
vboxdrv: fAsync=0 offMin=0x5ec offMax=0x29e9c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.8 (interface 0x00180000).
usb 6-2.1: new low speed USB device number 3 using uhci_hcd
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
usb 5-1.1: input irq status -75 received
usb 5-1.1: input irq status -75 received
usb 5-1.1: input irq status -75 received
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.0/input/input5
generic-usb 0003:046D:C226.0003: input,hidraw2: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1d.0-2.1/input0
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.1/input/input6
generic-usb 0003:046D:C226.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:1d.0-2.1/input1
usb 6-2.3: new low speed USB device number 4 using uhci_hcd
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.3/6-2.3:1.0/input/input7
generic-usb 0003:045E:0039.0005: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2.3/input0
usb 6-2.4: new full speed USB device number 5 using uhci_hcd
input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.4/6-2.4:1.0/input/input8
generic-usb 0003:046D:C227.0006: input,hiddev0,hidraw5: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1d.0-2.4/input0
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdc1): using internal journal
EXT3-fs (sdc1): mounted filesystem with writeback data mode
input: G15 Extra Keys as /devices/virtual/input/input9
Adding 971928k swap on /dev/sda2. Priority:-1 extents:1 across:971928k
r8169 0000:05:00.0: eth0: link down
r8169 0000:05:00.0: eth0: link down
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Registering the id_resolver key type
r8169 0000:05:00.0: eth0: link up
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
coretemp coretemp.0: TjMax is 97 C.
coretemp coretemp.1: TjMax is 97 C.
coretemp coretemp.2: TjMax is 97 C.
coretemp coretemp.3: TjMax is 97 C.
w83627ehf: Found W83667HG chip at 0x290
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID invalid.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID invalid.
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID invalid.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID invalid.
[-- Attachment #3: drm_edid.c.diff --]
[-- Type: text/plain, Size: 435 bytes --]
--- drm_edid.c 2011-06-10 22:37:36.605848000 +0200
+++ linux/drivers/gpu/drm/drm_edid.c 2011-06-13 13:04:43.136786102 +0200
@@ -292,7 +292,7 @@
block + (valid_extensions + 1) * EDID_LENGTH,
j, EDID_LENGTH))
goto out;
- if (drm_edid_block_valid(block + (valid_extensions + 1) * EDID_LENGTH)) {
+ if (drm_edid_block_valid(block + (valid_extensions + 0) * EDID_LENGTH)) {
valid_extensions++;
break;
}
[-- Attachment #4: Type: text/plain, Size: 181 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: nouveau Ignoring invalid EDID block 1
[not found] ` <4DF8D09C.5070704-GANU6spQydw@public.gmane.org>
@ 2011-06-15 16:23 ` Emil Velikov
2011-06-15 17:08 ` zaverel
0 siblings, 1 reply; 7+ messages in thread
From: Emil Velikov @ 2011-06-15 16:23 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW, zaverel
As you have figured out already the issue is related to the
EDID parser in the common drm code.
I believe somewhere during the development process the parsing
became more strict, thus your issue.
Note the following differences
* "old kernel" - 2.6.36 (modeline via xorg.conf)
1280x720 (0x79) 95.8MHz -HSync +VSync *current +preferred
h: width 1280 start 1360 end 1488 total 1696 skew 0 clock 56.5KHz
v: height 720 start 723 end 728 total 755 clock 74.8Hz
* "new kernel" - 2.6.39 (parsed by drm_edid)
1280x720 (0x79) 74.2MHz +HSync +VSync *current +preferred
h: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.5KHz
v: height 720 start 725 end 730 total 750 clock 50.0Hz
* parse-edid
Mode "1280x720" # vfreq 50.000Hz, hfreq 37.500kHz
DotClock 74.250000
HTimings 1280 1464 1504 1980
VTimings 720 725 730 750
Flags "+HSync" "+VSync"
EndMode
I would suggest for you to open a bugreport, attaching all the logs,
so that the developers working on the common drm code, can take a
look and provide better/safer solution (if available)
Thanks
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: nouveau Ignoring invalid EDID block 1
2011-06-15 16:23 ` Emil Velikov
@ 2011-06-15 17:08 ` zaverel
[not found] ` <4DF8E70F.1050304-GANU6spQydw@public.gmane.org>
0 siblings, 1 reply; 7+ messages in thread
From: zaverel @ 2011-06-15 17:08 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
Ok , but i already open a bug in dri-devel but i'v got no response until
now.
http://lists.freedesktop.org/archives/dri-devel/2011-June/012129.html
see you
Le 15/06/2011 18:23, Emil Velikov a écrit :
> As you have figured out already the issue is related to the
> EDID parser in the common drm code.
>
> I believe somewhere during the development process the parsing
> became more strict, thus your issue.
>
> Note the following differences
>
> * "old kernel" - 2.6.36 (modeline via xorg.conf)
>
> 1280x720 (0x79) 95.8MHz -HSync +VSync *current +preferred
> h: width 1280 start 1360 end 1488 total 1696 skew 0
> clock 56.5KHz
> v: height 720 start 723 end 728 total 755
> clock 74.8Hz
>
> * "new kernel" - 2.6.39 (parsed by drm_edid)
>
> 1280x720 (0x79) 74.2MHz +HSync +VSync *current +preferred
> h: width 1280 start 1720 end 1760 total 1980 skew 0
> clock 37.5KHz
> v: height 720 start 725 end 730 total 750
> clock 50.0Hz
>
> * parse-edid
>
> Mode "1280x720" # vfreq 50.000Hz, hfreq 37.500kHz
> DotClock 74.250000
> HTimings 1280 1464 1504 1980
> VTimings 720 725 730 750
> Flags "+HSync" "+VSync"
> EndMode
>
>
>
> I would suggest for you to open a bugreport, attaching all the logs,
> so that the developers working on the common drm code, can take a
> look and provide better/safer solution (if available)
>
> Thanks
>
>
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: nouveau Ignoring invalid EDID block 1
[not found] ` <4DF8E70F.1050304-GANU6spQydw@public.gmane.org>
@ 2011-06-16 10:54 ` zaverel
0 siblings, 0 replies; 7+ messages in thread
From: zaverel @ 2011-06-16 10:54 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
I open a new bugreport
https://bugs.freedesktop.org/show_bug.cgi?id=38364
and
http://lists.freedesktop.org/archives/dri-devel/2011-June/012196.html
see you
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-06-16 10:54 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-06-15 10:24 nouveau Ignoring invalid EDID block 1 zaverel
[not found] ` <4DF88862.9030609-GANU6spQydw@public.gmane.org>
2011-06-15 13:44 ` Emil Velikov
2011-06-15 15:02 ` zaverel
2011-06-15 15:32 ` zaverel
[not found] ` <4DF8D09C.5070704-GANU6spQydw@public.gmane.org>
2011-06-15 16:23 ` Emil Velikov
2011-06-15 17:08 ` zaverel
[not found] ` <4DF8E70F.1050304-GANU6spQydw@public.gmane.org>
2011-06-16 10:54 ` zaverel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.