* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6
@ 2011-12-30 5:27 Kim Lidström
2011-12-30 6:07 ` Mohammed Shafi
` (2 more replies)
0 siblings, 3 replies; 57+ messages in thread
From: Kim Lidström @ 2011-12-30 5:27 UTC (permalink / raw)
To: ath9k-devel
Hello!
I have an Acer Aspire 5250 with an "Acer Nplify 802.11b/g/n" wlan
adapter (Never heard of it
before.. But apparently it has a AR9485) that I'm having problems with.
I can connect to wlans but after a while the kernel hangs. I can't do
anything. I can't even produce a
kernel dump.
I even tried the latest version of comp-wireless (3.2-rc6-3) and it
was even worse! It crashed the system almost instantly.
^ permalink raw reply [flat|nested] 57+ messages in thread* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2011-12-30 5:27 [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 Kim Lidström @ 2011-12-30 6:07 ` Mohammed Shafi [not found] ` <CAFopJHe9t3BysVAG+ptimZkn7VuohY3c7iH15gq8K9v789ZTEQ@mail.gmail.com> 2012-01-02 21:46 ` Adrian Chadd 2012-01-12 20:02 ` Mihai Moldovan 2 siblings, 1 reply; 57+ messages in thread From: Mohammed Shafi @ 2011-12-30 6:07 UTC (permalink / raw) To: ath9k-devel On Fri, Dec 30, 2011 at 10:57 AM, Kim Lidstr?m <dexter@lacto.se> wrote: > Hello! > I have an Acer Aspire 5250 with an "Acer Nplify 802.11b/g/n" wlan > adapter (Never heard of it > before.. But apparently it has a AR9485) that I'm having problems with. > I can connect to wlans but after a while the kernel hangs. I can't do > anything. I can't even produce a > kernel dump. > I even tried the latest version of comp-wireless (3.2-rc6-3) and it > was even worse! It crashed the system almost instantly. > > From what I understand this specific chipset is not really implemented > and/or experimental. Am I right? > Either way I would be more than happy to help with debugging this and > maybe get this chipset working > sometime soon! The only problem us that my expertise only stretches so > far. Even though I know C > I've never done any kernel or driver work. > So what can I do? I'll see if I can get my hands on one (or two) of > those usb-to-serial adapters and see what happens, but I live on a > very tight budget so I can't hope for too much. *kindly provide lspci -vvvvxxx *let me try out some time today or tomorrow *if you get dumps/stack trace via netconsole pls let us know > > // Kim > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel -- shafi ^ permalink raw reply [flat|nested] 57+ messages in thread
[parent not found: <CAFopJHe9t3BysVAG+ptimZkn7VuohY3c7iH15gq8K9v789ZTEQ@mail.gmail.com>]
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 [not found] ` <CAFopJHe9t3BysVAG+ptimZkn7VuohY3c7iH15gq8K9v789ZTEQ@mail.gmail.com> @ 2011-12-30 7:17 ` Kim Lidström 2011-12-30 9:10 ` Mohammed Shafi 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2011-12-30 7:17 UTC (permalink / raw) To: ath9k-devel **forgot the mailing list** I ran lspci and attached the output in a file. I'm new to this mailing list thing so if I can't attach files just tell me! (I'm more used to IRC and pastebins ;)) I will definitely try to get netconsole running today. I can work around this problem by having the network cable connected. Then it simply won't crash - probably because it isn't connected to a wireless network then. I am using wicd so it's taking care of that. -------------- next part -------------- 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex Subsystem: Acer Incorporated [ALI] Device 0602 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 22 10 10 15 06 00 20 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 06 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 02 20 00 00 50: 25 10 02 06 00 00 00 00 00 00 00 00 00 00 00 00 60: cd 00 00 00 00 00 04 03 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 10 00 00 03 00 00 00 00 31 20 00 00 90: 00 00 00 7f 4b 01 00 00 00 01 20 00 00 00 00 00 a0: 01 80 30 01 ef be ad de 01 00 00 00 01 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 10 00 01 01 01 12 63 80 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 80 80 00 00 00 00 00 00 00 00 00 00:01.0 VGA compatible controller: ATI Technologies Inc Wrestler [Radeon HD 6310] (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device 0602 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 40 Region 0: Memory at 80000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at 4000 [size=256] Region 2: Memory at 90400000 (32-bit, non-prefetchable) [size=256K] Expansion ROM@<unassigned> [disabled] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4159 Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Kernel driver in use: radeon Kernel modules: radeon 00: 02 10 02 98 07 04 10 00 00 00 00 03 10 00 00 00 10: 08 00 00 80 01 40 00 00 00 00 40 90 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 06 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 06 50: 01 58 03 06 00 00 00 00 10 a0 92 00 a0 8f 00 00 60: 10 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 00 81 00 0c 30 e0 fe 00 00 00 00 59 41 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0]) Subsystem: Acer Incorporated [ALI] Device 0602 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 4118 [size=8] Region 1: I/O ports at 4124 [size=4] Region 2: I/O ports at 4110 [size=8] Region 3: I/O ports at 4120 [size=4] Region 4: I/O ports at 4100 [size=16] Region 5: Memory@90448000 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] SATA HBA v1.0 InCfgSpace Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ahci Kernel modules: ahci 00: 02 10 91 43 07 00 30 02 00 01 06 01 10 40 00 00 10: 19 41 00 00 25 41 00 00 11 41 00 00 21 41 00 00 20: 01 41 00 00 00 80 44 90 00 00 00 00 25 10 02 06 30: 00 00 00 00 70 00 00 00 00 00 00 00 0a 01 00 00 40: 14 80 bc 00 01 00 20 00 00 00 80 00 00 00 00 00 50: 05 70 86 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 50 22 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 12 a4 10 00 0f 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 06 1a 14 00 ab 01 08 00 f0 00 00 00 90: 27 60 74 c7 02 43 06 00 00 01 00 00 01 58 b1 02 a0: 0c 00 00 00 13 00 06 03 00 00 64 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 e0: 80 00 00 00 00 00 00 00 00 00 00 00 10 00 00 3f f0: 00 00 00 00 00 00 00 00 77 77 77 00 00 00 00 00 00:12.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI]) Subsystem: Acer Incorporated [ALI] Device 0602 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory@90447000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00: 02 10 97 43 17 00 a0 02 00 10 03 0c 10 40 80 00 10: 00 70 44 90 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 06 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 40: 80 01 00 f0 11 00 00 00 00 00 00 00 00 00 00 00 50: 40 00 00 f0 00 00 00 00 ff ff ff ff 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 ff 00 00 80 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 10 01 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:12.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI]) Subsystem: Acer Incorporated [ALI] Device 0602 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory@90446000 (32-bit, non-prefetchable) [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00: 02 10 96 43 17 00 b0 02 00 20 03 0c 10 40 00 00 10: 00 60 44 90 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 06 30: 00 00 00 00 c0 00 00 00 00 00 00 00 07 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 40 21 80 a0 01 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 20 00 00 01 00 00 00 00 00 00 00 00 a0: 01 00 00 01 00 00 08 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 e4 02 7e 00 00 40 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 0a 00 e0 20 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI]) Subsystem: Acer Incorporated [ALI] Device 0602 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory@90445000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00: 02 10 97 43 17 00 a0 02 00 10 03 0c 10 40 80 00 10: 00 50 44 90 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 06 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 40: 80 01 00 f0 11 00 00 00 00 00 00 00 00 00 00 00 50: 40 00 00 f0 00 00 00 00 ff ff ff ff 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 ff 00 00 80 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 10 01 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI]) Subsystem: Acer Incorporated [ALI] Device 0602 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory@90444000 (32-bit, non-prefetchable) [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00: 02 10 96 43 17 00 b0 02 00 20 03 0c 10 40 00 00 10: 00 40 44 90 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 06 30: 00 00 00 00 c0 00 00 00 00 00 00 00 07 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 40 21 80 a0 01 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 20 00 00 01 00 00 00 00 00 00 00 00 a0: 01 00 00 01 00 00 08 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 e4 02 7e 00 00 40 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 0a 00 e0 20 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) Subsystem: Acer Incorporated [ALI] Device 0602 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4, sp5100_tco 00: 02 10 85 43 03 04 20 02 42 00 05 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 06 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) Subsystem: Acer Incorporated [ALI] Device 0602 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory@90440000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00: 02 10 83 43 06 00 10 04 40 00 03 04 10 40 00 00 10: 04 00 44 90 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 06 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00 40: 00 00 02 00 01 10 00 00 00 00 00 00 01 00 00 00 50: 01 00 42 c8 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) Subsystem: Acer Incorporated [ALI] Device 0602 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 02 10 9d 43 0f 00 20 02 40 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 06 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 04 00 00 00 d5 ff 03 ff 07 ff a0 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 68 00 00 00 00 00 0f 00 e0 ff ff ff 70: 67 45 23 00 01 00 00 00 14 00 00 00 05 0b 00 00 80: 08 00 03 a8 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 10 d6 fe a0: 02 00 c1 fe 2e 01 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 09 39 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00: 02 10 84 43 07 00 a0 02 40 01 04 06 00 40 81 00 10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 80 22 20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 26 00 00 ff 00 00 00 00 0c 0f 3c d1 00 00 00 00 50: 01 00 00 00 08 00 03 a8 00 00 00 00 85 00 ff ff 60: ca 0e 17 00 ba 98 10 02 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 06 e0: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:15.0 PCI bridge: ATI Technologies Inc SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=05, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: 90300000-903fffff Prefetchable memory behind bridge: 0000000090000000-00000000900fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #247, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [b0] Subsystem: ATI Technologies Inc Device 0000 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Kernel driver in use: pcieport Kernel modules: shpchp 00: 02 10 a0 43 07 00 10 00 00 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 02 05 00 31 31 00 00 20: 30 90 30 90 01 90 01 90 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 06 00 00 00 00 10 a0 42 01 20 80 00 00 60: 10 08 00 00 11 0c 30 f7 00 00 00 11 40 00 04 00 70: 00 00 00 00 00 00 01 00 00 00 00 00 1f 00 00 00 80: 06 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 b0 80 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0d b8 00 00 02 10 00 00 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:15.2 PCI bridge: ATI Technologies Inc SB900 PCI to PCI bridge (PCIE port 2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 90200000-902fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [b0] Subsystem: ATI Technologies Inc Device 0000 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Kernel driver in use: pcieport Kernel modules: shpchp 00: 02 10 a2 43 07 00 10 00 00 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 06 06 00 21 21 00 00 20: 20 90 20 90 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 06 00 00 00 00 10 a0 42 00 20 80 00 00 60: 10 08 00 00 11 0c 30 02 43 00 11 70 00 00 04 00 70: 00 00 40 01 00 00 01 00 00 00 00 00 1f 00 00 00 80: 06 00 00 00 00 00 00 00 41 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 b0 80 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0d b8 00 00 02 10 00 00 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:15.3 PCI bridge: ATI Technologies Inc SB900 PCI to PCI bridge (PCIE port 3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: 90100000-901fffff Prefetchable memory behind bridge: 000000007f000000-000000007f0fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [b0] Subsystem: ATI Technologies Inc Device 0000 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Kernel driver in use: pcieport Kernel modules: shpchp 00: 02 10 a3 43 07 00 10 00 00 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 07 07 00 f1 01 00 00 20: 10 90 10 90 01 7f 01 7f 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 06 00 00 00 00 10 a0 42 00 20 80 00 00 60: 10 08 00 00 11 0c 30 03 43 00 11 70 00 00 04 00 70: 00 00 40 01 00 00 01 00 00 00 00 00 1f 00 00 00 80: 06 00 00 00 00 00 00 00 41 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 b0 80 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0d b8 00 00 02 10 00 00 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 00 17 00 00 10 00 43 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 20 08 2e 00 00 06 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 01 17 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 7e 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 03 00 fc 00 00 bf fe 00 03 00 7f 00 00 ff f7 00 90: 03 0a 00 00 00 0b 00 00 03 c0 fe 00 80 d8 fe 00 a0: 03 00 f8 00 80 ff fb 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 13 00 00 00 00 f0 ff 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 02 17 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 e0 3f 78 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 03 00 c2 04 88 00 22 18 80: 70 00 00 00 55 00 90 00 03 00 00 fb 44 64 82 01 90: 00 00 60 06 8a 88 40 1e 10 0f 0f 8d 37 13 00 00 a0: 00 00 00 00 01 00 00 00 00 00 40 00 00 00 00 00 b0: 83 1c 62 3a 97 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 32 00 00 80 02 01 00 00 00 00 00 00 00 00 00 00 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?> Kernel driver in use: k10temp Kernel modules: k10temp 00: 22 10 03 17 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 40: 20 3b 03 02 40 00 30 0a 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 01 00 7e 2f 00 00 00 20 1e 01 00 00 70: 00 00 00 00 97 08 00 00 00 00 00 00 01 01 01 19 80: 00 00 00 00 06 00 06 00 00 02 00 00 00 40 00 04 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 90 02 02 80 ef 0f 80 33 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 57 4f 02 00 c0 07 00 00 29 22 eb 99 e0: 00 00 00 00 20 00 00 00 61 17 00 10 00 00 00 00 f0: 0f 00 10 00 00 00 00 00 00 00 00 00 20 0f 50 00 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 04 17 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 18 17 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 33 03 00 00 3f 02 af 0b 00 80 00 14 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 16 17 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 04 00 00 00 20 10 08 00 40 20 10 00 20 10 08 00 60: 20 10 08 00 10 08 04 00 10 08 04 00 80 40 20 00 70: 80 40 20 00 1e 00 00 00 37 00 00 00 09 88 52 0a 80: 00 00 00 00 7f 3f 00 00 00 00 00 00 00 00 00 00 90: 2e 37 00 80 09 00 00 02 00 00 00 00 e0 01 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 0c 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 19 17 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06:00.0 Ethernet controller: Atheros Communications AR8152 v2.0 Fast Ethernet (rev c1) Subsystem: Acer Incorporated [ALI] Device 0602 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at 90200000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports@2000 [size=128] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4181 Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [6c] Vital Product Data Not readable Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 0f, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [180 v1] Device Serial Number ff-0c-da-b2-dc-0e-a1-ff Kernel driver in use: atl1c Kernel modules: atl1c 00: 69 19 62 20 07 04 10 00 c1 00 00 02 10 00 00 00 10: 04 00 20 90 00 00 00 00 01 20 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 06 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 40: 01 48 c3 f9 08 00 00 00 05 58 81 00 0c 30 e0 fe 50: 00 00 00 00 81 41 00 00 10 6c 01 00 c5 ff 00 00 60: 00 20 10 00 11 fc 07 00 43 00 11 10 03 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 69 19 62 20 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) Subsystem: Lite-On Communications Inc Device 6617 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at 90100000 (64-bit, non-prefetchable) [size=512K] Expansion ROM@7f000000 [disabled] [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [70] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00 Kernel driver in use: ath9k Kernel modules: ath9k 00: 8c 16 32 00 07 00 10 00 01 00 80 02 10 00 00 00 10: 04 00 10 90 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 ad 11 17 66 30: 00 00 ff ff 40 00 00 00 00 00 00 00 0b 01 00 00 40: 01 50 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 50: 05 70 84 01 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 10 00 02 00 c0 8d 00 00 10 20 10 00 11 6c 03 00 80: 43 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 10 00 00 00 00 00 00 00 02 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2011-12-30 7:17 ` Kim Lidström @ 2011-12-30 9:10 ` Mohammed Shafi 2011-12-30 10:08 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Mohammed Shafi @ 2011-12-30 9:10 UTC (permalink / raw) To: ath9k-devel On Fri, Dec 30, 2011 at 12:47 PM, Kim Lidstr?m <dexter@lacto.se> wrote: > **forgot the mailing list** > > I ran lspci and attached the output in a file. > I'm new to this mailing list thing so if I can't attach files just > tell me! (I'm more used to IRC and pastebins ;)) if you got time please read through http://linuxwireless.org/en/users/Documentation/ASPM and see if disabling ASPM helps. please be very careful as if we do something wrong it might make the hardware unusable. i am just browsing with the AR9485 card > > I will definitely try to get netconsole running today. > > I can work around this problem by having the network cable connected. > Then it simply won't crash - probably because it isn't connected to a > wireless network then. I am using wicd so it's taking care of that. > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel > -- shafi ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2011-12-30 9:10 ` Mohammed Shafi @ 2011-12-30 10:08 ` Kim Lidström 2011-12-30 10:30 ` Mohammed Shafi 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2011-12-30 10:08 UTC (permalink / raw) To: ath9k-devel Nope, that didn't help at all. I tried disabling ASPM and that didn't help (Turns out that, according to dmesg it was turned off to begin with) I'm attaching my dmesg, in case that will help. I will try to set up netconsole today. On Fri, Dec 30, 2011 at 10:10 AM, Mohammed Shafi <shafi.wireless@gmail.com> wrote: > On Fri, Dec 30, 2011 at 12:47 PM, Kim Lidstr?m <dexter@lacto.se> wrote: >> **forgot the mailing list** >> >> I ran lspci and attached the output in a file. >> I'm new to this mailing list thing so if I can't attach files just >> tell me! (I'm more used to IRC and pastebins ;)) > > if you got time please read through > http://linuxwireless.org/en/users/Documentation/ASPM > and see if disabling ASPM helps. please be very careful > as if we do something wrong it might make the hardware > unusable. i am just browsing with the AR9485 card > >> >> I will definitely try to get netconsole running today. >> >> I can work around this problem by having the network cable connected. >> Then it simply won't crash - probably because it isn't connected to a >> wireless network then. I am using wicd so it's taking care of that. >> >> _______________________________________________ >> ath9k-devel mailing list >> ath9k-devel at lists.ath9k.org >> https://lists.ath9k.org/mailman/listinfo/ath9k-devel >> > > > > -- > shafi -------------- next part -------------- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.6-1-ARCH (tobias at T-POWA-LX) (gcc version 4.6.2 20111125 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Dec 22 08:52:33 UTC 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006d639000 (usable) [ 0.000000] BIOS-e820: 000000006d639000 - 000000006d839000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006d839000 - 000000006ed3f000 (usable) [ 0.000000] BIOS-e820: 000000006ed3f000 - 000000006edbf000 (reserved) [ 0.000000] BIOS-e820: 000000006edbf000 - 000000006eebf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006eebf000 - 000000006eef6000 (ACPI data) [ 0.000000] BIOS-e820: 000000006eef6000 - 000000006ef00000 (usable) [ 0.000000] BIOS-e820: 000000006ef00000 - 000000007f000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: Acer Aspire 5250/HMA51-BZ, BIOS V1.05 09/07/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x6ef00 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 base 060000000 mask FF0000000 write-back [ 0.000000] 3 base 06EEBD000 mask FFFFFF000 uncachable [ 0.000000] 4 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00fe1b0] fe1b0 [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000 [ 0.000000] RAMDISK: 6d21c000 - 6d629000 [ 0.000000] Allocated new RAMDISK: 373f1000 - 377fd89c [ 0.000000] Move RAMDISK from 000000006d21c000 - 000000006d62889b to 373f1000 - 377fd89b [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 6eef5120 00064 (v01 ACRSYS ACRPRDCT 00000003 01000013) [ 0.000000] ACPI: FACP 6eef4000 000F4 (v04 ACRSYS ACRPRDCT 00000003 1025 00040000) [ 0.000000] ACPI: DSDT 6eee8000 088FC (v01 ACRSYS ACRPRDCT F0000000 1025 00040000) [ 0.000000] ACPI: FACS 6ee97000 00040 [ 0.000000] ACPI: HPET 6eef3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 6eef2000 00084 (v02 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 6eef1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: BOOT 6eee7000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SLIC 6eee6000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 6eee5000 003DE (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 6eee3000 0168E (v02 AMD ALIB 00000001 MSFT 04000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 887MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0006ef00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0006d639 [ 0.000000] 0: 0x0006d839 -> 0x0006ed3f [ 0.000000] 0: 0x0006eef6 -> 0x0006ef00 [ 0.000000] On node 0 totalpages: 453336 [ 0.000000] free_area_init_node: node 0, pgdat c05ce580, node_mem_map f6610200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1775 pages used for memmap [ 0.000000] HighMem zone: 224348 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7f000000 (gap: 7f000000:79000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6000000 s29632 r0 d23616 u1048576 [ 0.000000] pcpu-alloc: s29632 r0 d23616 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 449785 [ 0.000000] Kernel command line: root=/dev/mapper/gunvor-root cryptdevice=/dev/sda5:gunvor ro [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 7270144 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0006ef00) [ 0.000000] Memory: 1780424k/1817600k available (3472k kernel code, 32920k reserved, 1483k data, 512k init, 904492k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc05d7000 - 0xc0657000 ( 512 kB) [ 0.000000] .data : 0xc0464355 - 0xc05d6fc0 (1483 kB) [ 0.000000] .text : 0xc0100000 - 0xc0464355 (3472 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:512 [ 0.000000] CPU 0 irqstacks, hard=f540e000 soft=f5420000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1296.910 MHz processor. [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.89 BogoMIPS (lpj=4323033) [ 0.003349] pid_max: default: 32768 minimum: 301 [ 0.003451] Security Framework initialized [ 0.003461] AppArmor: AppArmor disabled by boot time parameter [ 0.003515] Mount-cache hash table entries: 512 [ 0.003979] Initializing cgroup subsys cpuacct [ 0.004011] Initializing cgroup subsys memory [ 0.004034] Initializing cgroup subsys devices [ 0.004038] Initializing cgroup subsys freezer [ 0.004043] Initializing cgroup subsys net_cls [ 0.004048] Initializing cgroup subsys blkio [ 0.004125] CPU: Physical Processor ID: 0 [ 0.004129] CPU: Processor Core ID: 0 [ 0.004135] mce: CPU supports 6 MCE banks [ 0.006226] ACPI: Core revision 20110623 [ 0.016697] ftrace: allocating 15589 entries in 31 pages [ 0.020127] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.020471] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.054927] CPU0: AMD E-300 APU with Radeon(tm) HD Graphics stepping 00 [ 0.056663] Performance Events: AMD PMU driver. [ 0.056663] ... version: 0 [ 0.056663] ... bit width: 48 [ 0.056663] ... generic registers: 4 [ 0.056663] ... value mask: 0000ffffffffffff [ 0.056663] ... max period: 00007fffffffffff [ 0.056663] ... fixed-purpose events: 0 [ 0.056663] ... event mask: 000000000000000f [ 0.073918] NMI watchdog enabled, takes one hw-pmu counter. [ 0.100113] CPU 1 irqstacks, hard=f54b2000 soft=f54b4000 [ 0.100121] Booting Node 0, Processors #1 [ 0.100127] smpboot cpu 1: start_ip = 9b000 [ 0.006666] Initializing CPU#1 [ 0.196712] NMI watchdog enabled, takes one hw-pmu counter. [ 0.203375] Brought up 2 CPUs [ 0.203389] Total of 2 processors activated (5189.43 BogoMIPS). [ 0.204009] devtmpfs: initialized [ 0.204009] PM: Registering ACPI NVS region at 6d639000 (2097152 bytes) [ 0.204009] PM: Registering ACPI NVS region at 6edbf000 (1048576 bytes) [ 0.208050] print_constraints: dummy: [ 0.208195] NET: Registered protocol family 16 [ 0.208503] Extended Config Space enabled on 0 nodes [ 0.208567] ACPI: bus type pci registered [ 0.208776] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.208784] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.208788] PCI: Using MMCONFIG for extended config space [ 0.208793] PCI: Using configuration type 1 for base access [ 0.210124] bio: create slab <bio-0> at 0 [ 0.210206] ACPI: Added _OSI(Module Device) [ 0.210206] ACPI: Added _OSI(Processor Device) [ 0.210206] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.210206] ACPI: Added _OSI(Processor Aggregator Device) [ 0.212499] ACPI: EC: Look up EC in DSDT [ 0.215467] ACPI: Executed 1 blocks of module-level executable AML code [ 0.220481] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.240900] ACPI: Interpreter enabled [ 0.240911] ACPI: (supports S0 S3 S4 S5) [ 0.240957] ACPI: Using IOAPIC for interrupt routing [ 0.377473] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.377785] ACPI: No dock devices found. [ 0.377790] HEST: Table not found. [ 0.377798] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.378071] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.378497] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.378505] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.378511] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.378516] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] [ 0.378521] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] [ 0.378527] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] [ 0.378532] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] [ 0.378537] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] [ 0.378542] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.378547] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.378552] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] [ 0.378557] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] [ 0.378561] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] [ 0.378567] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] [ 0.378572] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] [ 0.378577] pci_root PNP0A08:00: host bridge window [mem 0x7f000000-0xf7ffffff] [ 0.378582] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xffffffff] [ 0.378596] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff]) [ 0.378620] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600 [ 0.378687] pci 0000:00:01.0: [1002:9802] type 0 class 0x000300 [ 0.378705] pci 0000:00:01.0: reg 10: [mem 0x80000000-0x8fffffff pref] [ 0.378717] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff] [ 0.378729] pci 0000:00:01.0: reg 18: [mem 0x90400000-0x9043ffff] [ 0.378782] pci 0000:00:01.0: supports D1 D2 [ 0.378838] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 0.378868] pci 0000:00:11.0: reg 10: [io 0x4118-0x411f] [ 0.378884] pci 0000:00:11.0: reg 14: [io 0x4124-0x4127] [ 0.378899] pci 0000:00:11.0: reg 18: [io 0x4110-0x4117] [ 0.378914] pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123] [ 0.378930] pci 0000:00:11.0: reg 20: [io 0x4100-0x410f] [ 0.378945] pci 0000:00:11.0: reg 24: [mem 0x90448000-0x904483ff] [ 0.379015] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.379036] pci 0000:00:12.0: reg 10: [mem 0x90447000-0x90447fff] [ 0.379138] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.379723] pci 0000:00:12.2: reg 10: [mem 0x90446000-0x904460ff] [ 0.382706] pci 0000:00:12.2: supports D1 D2 [ 0.382718] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.382729] pci 0000:00:12.2: PME# disabled [ 0.382775] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.382801] pci 0000:00:13.0: reg 10: [mem 0x90445000-0x90445fff] [ 0.382905] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.383343] pci 0000:00:13.2: reg 10: [mem 0x90444000-0x904440ff] [ 0.386334] pci 0000:00:13.2: supports D1 D2 [ 0.386346] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.386356] pci 0000:00:13.2: PME# disabled [ 0.386402] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.386732] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.386770] pci 0000:00:14.2: reg 10: [mem 0x90440000-0x90443fff 64bit] [ 0.386853] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.386862] pci 0000:00:14.2: PME# disabled [ 0.386884] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.386993] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.387069] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604 [ 0.387165] pci 0000:00:15.0: supports D1 D2 [ 0.387211] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604 [ 0.387302] pci 0000:00:15.2: supports D1 D2 [ 0.387346] pci 0000:00:15.3: [1002:43a3] type 1 class 0x000604 [ 0.387438] pci 0000:00:15.3: supports D1 D2 [ 0.387489] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600 [ 0.387541] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600 [ 0.387588] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600 [ 0.387639] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600 [ 0.387698] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600 [ 0.387746] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600 [ 0.387794] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600 [ 0.387842] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600 [ 0.387981] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode) [ 0.387999] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.388005] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.388011] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.388016] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) [ 0.388022] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) [ 0.388027] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) [ 0.388033] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.388038] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.388043] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.388049] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.388054] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.388059] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.388064] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) [ 0.388070] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) [ 0.388075] pci 0000:00:14.4: bridge window [mem 0x7f000000-0xf7ffffff] (subtractive decode) [ 0.388081] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xffffffff] (subtractive decode) [ 0.388165] pci 0000:00:15.0: PCI bridge to [bus 02-05] [ 0.388177] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff] [ 0.388185] pci 0000:00:15.0: bridge window [mem 0x90300000-0x903fffff] [ 0.388196] pci 0000:00:15.0: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.388499] pci 0000:06:00.0: [1969:2062] type 0 class 0x000200 [ 0.388729] pci 0000:06:00.0: reg 10: [mem 0x90200000-0x9023ffff 64bit] [ 0.388888] pci 0000:06:00.0: reg 18: [io 0x2000-0x207f] [ 0.389698] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.389755] pci 0000:06:00.0: PME# disabled [ 0.396809] pci 0000:00:15.2: PCI bridge to [bus 06-06] [ 0.396826] pci 0000:00:15.2: bridge window [io 0x2000-0x2fff] [ 0.396835] pci 0000:00:15.2: bridge window [mem 0x90200000-0x902fffff] [ 0.397070] pci 0000:07:00.0: [168c:0032] type 0 class 0x000280 [ 0.397184] pci 0000:07:00.0: reg 10: [mem 0x90100000-0x9017ffff 64bit] [ 0.397296] pci 0000:07:00.0: reg 30: [mem 0xffff0000-0xffffffff pref] [ 0.397494] pci 0000:07:00.0: supports D1 D2 [ 0.397499] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.397544] pci 0000:07:00.0: PME# disabled [ 0.403429] pci 0000:00:15.3: PCI bridge to [bus 07-07] [ 0.403451] pci 0000:00:15.3: bridge window [mem 0x90100000-0x901fffff] [ 0.403495] pci_bus 0000:00: on NUMA node 0 [ 0.403511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.403797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT] [ 0.403881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB2._PRT] [ 0.403984] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB3._PRT] [ 0.404142] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.404251] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.404260] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.404264] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.419440] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.419610] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.419782] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.419951] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.420112] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.420227] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.420341] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.420454] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.420607] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.420607] vgaarb: loaded [ 0.420607] vgaarb: bridge control possible 0000:00:01.0 [ 0.420607] PCI: Using ACPI for IRQ routing [ 0.423873] PCI: pci_cache_line_size set to 64 bytes [ 0.424106] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.424112] reserve RAM buffer: 000000006d639000 - 000000006fffffff [ 0.424119] reserve RAM buffer: 000000006ed3f000 - 000000006fffffff [ 0.424124] reserve RAM buffer: 000000006ef00000 - 000000006fffffff [ 0.424384] NetLabel: Initializing [ 0.424389] NetLabel: domain hash size = 128 [ 0.424392] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.424420] NetLabel: unlabeled traffic allowed by default [ 0.424453] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.424463] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.426497] Switching to clocksource hpet [ 0.426744] Switched to NOHz mode on CPU #1 [ 0.429969] Switched to NOHz mode on CPU #0 [ 0.440640] pnp: PnP ACPI init [ 0.440681] ACPI: bus type pnp registered [ 0.440982] pnp 00:00: [bus 00-ff] [ 0.440991] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.440996] pnp 00:00: [io 0x0d00-0xffff window] [ 0.441003] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.441008] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.441014] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.441019] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.441024] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.441029] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.441034] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.441039] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.441043] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.441048] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.441053] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.441063] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.441068] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.441073] pnp 00:00: [mem 0x7f000000-0xf7ffffff window] [ 0.441078] pnp 00:00: [mem 0xfc000000-0xffffffff window] [ 0.441083] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.441207] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.441337] pnp 00:01: [mem 0xfec00000-0xfec00fff] [ 0.441343] pnp 00:01: [mem 0xfee00000-0xfee00fff] [ 0.441452] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.441459] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.441467] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.441725] pnp 00:02: [irq 0 disabled] [ 0.441748] pnp 00:02: [irq 8] [ 0.441752] pnp 00:02: [mem 0xfed00000-0xfed003ff] [ 0.441818] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.441967] pnp 00:03: [io 0x0000-0x000f] [ 0.441973] pnp 00:03: [io 0x0081-0x008f] [ 0.441978] pnp 00:03: [io 0x00c0-0x00df] [ 0.441983] pnp 00:03: [dma 4] [ 0.442054] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.442078] pnp 00:04: [io 0x00f0-0x00fe] [ 0.442091] pnp 00:04: [irq 13] [ 0.442162] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.442246] pnp 00:05: [io 0x0070-0x0071] [ 0.442322] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.442345] pnp 00:06: [io 0x0061] [ 0.442430] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.442499] pnp 00:07: [io 0x0060] [ 0.442504] pnp 00:07: [io 0x0064] [ 0.442516] pnp 00:07: [irq 1] [ 0.442590] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.442692] pnp 00:08: [irq 12] [ 0.442770] pnp 00:08: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active) [ 0.442873] pnp 00:09: [io 0x0010-0x001f] [ 0.442878] pnp 00:09: [io 0x002e-0x002f] [ 0.442883] pnp 00:09: [io 0x0072-0x0073] [ 0.442887] pnp 00:09: [io 0x0080] [ 0.442891] pnp 00:09: [io 0x00b0-0x00b1] [ 0.442895] pnp 00:09: [io 0x0092] [ 0.442899] pnp 00:09: [io 0x0400-0x04cf] [ 0.442903] pnp 00:09: [io 0x04d0-0x04d1] [ 0.442907] pnp 00:09: [io 0x04d6] [ 0.442911] pnp 00:09: [io 0x0680-0x06ff] [ 0.442915] pnp 00:09: [io 0x077a] [ 0.442919] pnp 00:09: [io 0x0c00-0x0c01] [ 0.442923] pnp 00:09: [io 0x0c14] [ 0.442927] pnp 00:09: [io 0x0c50-0x0c52] [ 0.442931] pnp 00:09: [io 0x0c6c] [ 0.442935] pnp 00:09: [io 0x0c6f] [ 0.442938] pnp 00:09: [io 0x0cd0-0x0cdb] [ 0.443060] system 00:09: [io 0x0400-0x04cf] has been reserved [ 0.443067] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.443074] system 00:09: [io 0x04d6] has been reserved [ 0.443080] system 00:09: [io 0x0680-0x06ff] has been reserved [ 0.443086] system 00:09: [io 0x077a] has been reserved [ 0.443091] system 00:09: [io 0x0c00-0x0c01] has been reserved [ 0.443097] system 00:09: [io 0x0c14] has been reserved [ 0.443103] system 00:09: [io 0x0c50-0x0c52] has been reserved [ 0.443108] system 00:09: [io 0x0c6c] has been reserved [ 0.443114] system 00:09: [io 0x0c6f] has been reserved [ 0.443119] system 00:09: [io 0x0cd0-0x0cdb] has been reserved [ 0.443127] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.443240] pnp 00:0a: [mem 0x000e0000-0x000fffff] [ 0.443246] pnp 00:0a: [mem 0xffe00000-0xffffffff] [ 0.443397] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.443405] system 00:0a: [mem 0xffe00000-0xffffffff] has been reserved [ 0.443413] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.506994] pnp: PnP ACPI: found 11 devices [ 0.507004] ACPI: ACPI bus type pnp unregistered [ 0.550167] pci 0000:07:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.550179] PCI: max bus depth: 1 pci_try_num: 2 [ 0.550244] pci 0000:00:15.3: BAR 15: assigned [mem 0x7f000000-0x7f0fffff pref] [ 0.550251] pci 0000:00:14.4: PCI bridge to [bus 01-01] [ 0.550271] pci 0000:00:15.0: PCI bridge to [bus 02-05] [ 0.550278] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff] [ 0.550287] pci 0000:00:15.0: bridge window [mem 0x90300000-0x903fffff] [ 0.550296] pci 0000:00:15.0: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.550307] pci 0000:00:15.2: PCI bridge to [bus 06-06] [ 0.550314] pci 0000:00:15.2: bridge window [io 0x2000-0x2fff] [ 0.550322] pci 0000:00:15.2: bridge window [mem 0x90200000-0x902fffff] [ 0.550338] pci 0000:07:00.0: BAR 6: assigned [mem 0x7f000000-0x7f00ffff pref] [ 0.550344] pci 0000:00:15.3: PCI bridge to [bus 07-07] [ 0.550353] pci 0000:00:15.3: bridge window [mem 0x90100000-0x901fffff] [ 0.550360] pci 0000:00:15.3: bridge window [mem 0x7f000000-0x7f0fffff pref] [ 0.550407] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.550416] pci 0000:00:15.0: setting latency timer to 64 [ 0.550429] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.550438] pci 0000:00:15.2: setting latency timer to 64 [ 0.550450] pci 0000:00:15.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.550458] pci 0000:00:15.3: setting latency timer to 64 [ 0.550466] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.550471] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.550476] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.550481] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.550487] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.550492] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.550497] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.550502] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.550507] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.550512] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] [ 0.550517] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.550522] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.550527] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.550532] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] [ 0.550537] pci_bus 0000:00: resource 18 [mem 0x7f000000-0xf7ffffff] [ 0.550542] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xffffffff] [ 0.550548] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.550552] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.550557] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.550562] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.550568] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.550573] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.550578] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.550583] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.550588] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.550592] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff] [ 0.550597] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.550602] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.550607] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.550612] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff] [ 0.550617] pci_bus 0000:01: resource 18 [mem 0x7f000000-0xf7ffffff] [ 0.550623] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xffffffff] [ 0.550628] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.550633] pci_bus 0000:02: resource 1 [mem 0x90300000-0x903fffff] [ 0.550638] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.550644] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.550649] pci_bus 0000:06: resource 1 [mem 0x90200000-0x902fffff] [ 0.550655] pci_bus 0000:07: resource 1 [mem 0x90100000-0x901fffff] [ 0.550660] pci_bus 0000:07: resource 2 [mem 0x7f000000-0x7f0fffff pref] [ 0.550762] NET: Registered protocol family 2 [ 0.550916] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.551310] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.552042] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.552394] TCP: Hash tables configured (established 131072 bind 65536) [ 0.552400] TCP reno registered [ 0.552408] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.552431] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.552659] NET: Registered protocol family 1 [ 0.552693] pci 0000:00:01.0: Boot video device [ 0.603731] PCI: CLS 64 bytes, default 64 [ 0.603861] Unpacking initramfs... [ 0.765211] Freeing initrd memory: 4148k freed [ 0.768300] Simple Boot Flag at 0x44 set to 0x1 [ 0.769058] apm: BIOS not found. [ 0.769680] audit: initializing netlink socket (disabled) [ 0.769708] type=2000 audit(1325239321.766:1): initialized [ 0.776273] highmem bounce pool size: 64 pages [ 0.776288] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.792143] VFS: Disk quotas dquot_6.5.2 [ 0.792330] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.792584] msgmni has been set to 1718 [ 0.793214] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.793332] io scheduler noop registered [ 0.793369] io scheduler deadline registered [ 0.793404] io scheduler cfq registered (default) [ 0.794148] ERST: Table is not found! [ 0.794153] GHES: HEST is not enabled! [ 0.794180] isapnp: Scanning for PnP cards... [ 1.151200] isapnp: No Plug & Play device found [ 1.151549] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.341412] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.359031] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.359116] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.359767] mousedev: PS/2 mouse device common for all mice [ 1.361335] rtc_cmos 00:05: RTC can wake from S4 [ 1.361642] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.361684] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 1.361737] cpuidle: using governor ladder [ 1.361742] cpuidle: using governor menu [ 1.362172] TCP cubic registered [ 1.362179] NET: Registered protocol family 17 [ 1.362192] Registering the dns_resolver key type [ 1.362249] Using IPI No-Shortcut mode [ 1.362808] PM: Hibernation image not present or could not be loaded. [ 1.362827] registered taskstats version 1 [ 1.370393] rtc_cmos 00:05: setting system clock to 2011-12-30 10:02:03 UTC (1325239323) [ 1.370523] Initializing network drop monitor service [ 1.370706] Freeing unused kernel memory: 512k freed [ 1.371162] Write protecting the kernel text: 3476k [ 1.371213] Write protecting the kernel read-only data: 1076k [ 1.378431] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.397857] udevd[38]: starting version 175 [ 1.520775] SCSI subsystem initialized [ 1.527732] usbcore: registered new interface driver usbfs [ 1.527789] usbcore: registered new interface driver hub [ 1.531795] usbcore: registered new device driver usb [ 1.550763] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.550832] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.550868] ehci_hcd 0000:00:12.2: setting latency timer to 64 [ 1.550876] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.550961] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.550981] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.551020] QUIRK: Enable AMD PLL fix [ 1.551041] ehci_hcd 0000:00:12.2: debug port 1 [ 1.551083] ehci_hcd 0000:00:12.2: irq 17, io mem 0x90446000 [ 1.552861] libata version 3.00 loaded. [ 1.561615] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.562580] hub 1-0:1.0: USB hub found [ 1.562599] hub 1-0:1.0: 5 ports detected [ 1.562784] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.562824] ehci_hcd 0000:00:13.2: setting latency timer to 64 [ 1.562833] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.562854] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.562871] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.562915] ehci_hcd 0000:00:13.2: debug port 1 [ 1.562944] ehci_hcd 0000:00:13.2: irq 17, io mem 0x90444000 [ 1.570070] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.570440] hub 2-0:1.0: USB hub found [ 1.570453] hub 2-0:1.0: 5 ports detected [ 1.570712] ahci 0000:00:11.0: version 3.0 [ 1.570746] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.570886] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.570895] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.573280] scsi0 : ahci [ 1.575944] scsi1 : ahci [ 1.577720] ata1: SATA max UDMA/133 abar m1024 at 0x90448000 port 0x90448100 irq 19 [ 1.577731] ata2: SATA max UDMA/133 abar m1024 at 0x90448000 port 0x90448180 irq 19 [ 1.584567] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.585143] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.585182] ohci_hcd 0000:00:12.0: setting latency timer to 64 [ 1.585190] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.585230] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.585296] ohci_hcd 0000:00:12.0: irq 18, io mem 0x90447000 [ 1.641481] hub 3-0:1.0: USB hub found [ 1.641497] hub 3-0:1.0: 5 ports detected [ 1.641676] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.641719] ohci_hcd 0000:00:13.0: setting latency timer to 64 [ 1.641728] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.641749] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 1.641790] ohci_hcd 0000:00:13.0: irq 18, io mem 0x90445000 [ 1.698181] hub 4-0:1.0: USB hub found [ 1.698198] hub 4-0:1.0: 5 ports detected [ 1.770342] Refined TSC clocksource calibration: 1296.752 MHz. [ 1.770358] Switching to clocksource tsc [ 1.876954] usb 2-1: new high speed USB device number 2 using ehci_hcd [ 2.063619] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.063672] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.066457] ata2.00: ATAPI: HL-DT-STDVDRAM GT32N, 1.00, max UDMA/100 [ 2.069246] ata2.00: configured for UDMA/100 [ 2.118345] ata1.00: ATA-8: ST9250315AS, 0001SDM1, max UDMA/133 [ 2.118356] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.120404] ata1.00: configured for UDMA/133 [ 2.120712] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0001 PQ: 0 ANSI: 5 [ 2.123881] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT32N 1.00 PQ: 0 ANSI: 5 [ 2.135203] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.135376] sd 0:0:0:0: [sda] Write Protect is off [ 2.135384] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.135456] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.151121] sda: sda1 sda2 < sda5 > [ 2.152682] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.158994] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.159010] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.159575] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.223596] usb 2-2: new high speed USB device number 3 using ehci_hcd [ 2.443964] device-mapper: uevent: version 1.0.3 [ 2.445158] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel at redhat.com [ 7.576184] Intel AES-NI instructions are not detected. [ 7.581890] padlock_aes: VIA PadLock not detected. [ 7.605465] padlock_sha: VIA PadLock Hash Engine not detected. [ 8.860309] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 8.860319] EXT4-fs (dm-1): write access will be enabled during recovery [ 8.884749] EXT4-fs (dm-1): recovery complete [ 8.890935] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 10.513745] udevd[297]: starting version 175 [ 10.696506] ACPI: acpi_idle registered with cpuidle [ 10.701186] powernow-k8: Found 1 AMD E-300 APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00) [ 10.701270] powernow-k8: 0 : pstate 0 (1300 MHz) [ 10.701275] powernow-k8: 1 : pstate 1 (1114 MHz) [ 10.701279] powernow-k8: 2 : pstate 2 (780 MHz) [ 10.913186] Linux agpgart interface v0.103 [ 10.976412] [drm] Initialized drm 1.1.0 20060810 [ 10.980803] wmi: Mapper loaded [ 10.985516] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 11.025068] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 11.097123] acpi device:01: registered as cooling_device2 [ 11.097275] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 11.097409] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 11.104582] atl1c 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 11.104640] atl1c 0000:06:00.0: setting latency timer to 64 [ 11.220968] atl1c 0000:06:00.0: version 1.0.1.0-NAPI [ 11.471111] Linux media interface: v0.10 [ 11.603879] ACPI: Battery Slot [BAT1] (battery present) [ 11.613669] ACPI: AC Adapter [ACAD] (on-line) [ 11.615843] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 11.615980] ACPI: Power Button [PWRB] [ 11.616092] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 11.616184] ACPI: Sleep Button [SLPB] [ 11.616321] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 [ 11.616477] ACPI: Lid Switch [LID] [ 11.616582] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 11.616834] ACPI: Power Button [PWRF] [ 11.743197] Linux video capture interface: v2.00 [ 11.789688] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 11.789826] SP5100 TCO timer: mmio address 0xb8fe00 already in use [ 11.816214] acer_wmi: Acer Laptop ACPI-WMI Extras [ 11.816240] acer_wmi: No or unsupported WMI interface, unable to load [ 12.160157] cfg80211: Calling CRDA to update world regulatory domain [ 12.197777] Initializing USB Mass Storage driver... [ 12.197917] usbcore: registered new interface driver usb-storage [ 12.197922] USB Mass Storage support registered. [ 12.426643] psmouse serio1: ID: 10 00 64 [ 12.563301] uvcvideo: Found UVC 1.00 device WebCam (064e:d214) [ 12.566356] input: WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input7 [ 12.566590] usbcore: registered new interface driver uvcvideo [ 12.566595] USB Video Class driver (1.1.1) [ 12.591698] usb 2-2: USB disconnect, device number 3 [ 12.598138] scsi2 : usb-storage 2-2:1.0 [ 12.598621] usbcore: registered new interface driver ums-realtek [ 12.600563] elantech: assuming hardware version 2, firmware version 4.2.19 [ 12.671118] elantech: Synaptics capabilities query result 0x68, 0x18, 0x0c. [ 12.789194] [drm] radeon defaulting to kernel modesetting. [ 12.789204] [drm] radeon kernel modesetting enabled. [ 12.789299] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 12.789310] radeon 0000:00:01.0: setting latency timer to 64 [ 12.790198] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1025:0x0602). [ 12.790318] [drm] register mmio base: 0x90400000 [ 12.790322] [drm] register mmio size: 262144 [ 12.793562] ATOM BIOS: Acer [ 12.793627] radeon 0000:00:01.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used) [ 12.793635] radeon 0000:00:01.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF [ 12.793850] [drm] Detected VRAM RAM=256M, BAR=256M [ 12.793858] [drm] RAM width 32bits DDR [ 12.794049] [TTM] Zone kernel: Available graphics memory: 440296 kiB. [ 12.794057] [TTM] Zone highmem: Available graphics memory: 892542 kiB. [ 12.794061] [TTM] Initializing pool allocator. [ 12.794120] [drm] radeon: 256M of VRAM memory ready [ 12.794125] [drm] radeon: 512M of GTT memory ready. [ 12.794159] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 12.794163] [drm] Driver supports precise vblank timestamp query. [ 12.794218] radeon 0000:00:01.0: irq 40 for MSI/MSI-X [ 12.794228] radeon 0000:00:01.0: radeon: using MSI. [ 12.794279] [drm] radeon: irq initialized. [ 12.794289] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 12.798125] [drm] Loading PALM Microcode [ 12.966615] usbcore: registered new interface driver uas [ 12.986751] elantech: retrying ps2 command 0xe6 (2). [ 13.142378] ath9k 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 13.142404] ath9k 0000:07:00.0: setting latency timer to 64 [ 13.150587] ath: EEPROM regdomain: 0x65 [ 13.150592] ath: EEPROM indicates we should expect a direct regpair map [ 13.150600] ath: Country alpha2 being used: 00 [ 13.150603] ath: Regpair used: 0x65 [ 13.193743] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 13.194368] Registered led device: ath9k-phy0 [ 13.194386] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xf8f80000, irq=19 [ 13.243332] radeon 0000:00:01.0: WB enabled [ 13.260201] [drm] ring test succeeded in 1 usecs [ 13.260465] [drm] radeon: ib pool ready. [ 13.260627] [drm] ib test succeeded in 0 usecs [ 13.261610] [drm] Radeon Display Connectors [ 13.261616] [drm] Connector 0: [ 13.261620] [drm] LVDS [ 13.261622] [drm] HPD1 [ 13.261628] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 13.261632] [drm] Encoders: [ 13.261635] [drm] LCD1: INTERNAL_UNIPHY [ 13.261639] [drm] Connector 1: [ 13.261641] [drm] VGA [ 13.261646] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [ 13.261649] [drm] Encoders: [ 13.261653] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 13.323193] [drm] Radeon display connector LVDS-1: Found valid EDID [ 13.335588] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID [ 13.335636] [drm] Internal thermal controller without fan control [ 13.335764] [drm] radeon: power management initialized [ 13.428948] cfg80211: World regulatory domain updated: [ 13.428959] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 13.428966] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.428972] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.428977] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.428983] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.428988] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.500248] elantech: retrying ps2 command 0xf8 (2). [ 13.795862] [drm] fb mappable at 0x80141000 [ 13.795870] [drm] vram apper at 0x80000000 [ 13.795874] [drm] size 4325376 [ 13.795877] [drm] fb depth is 24 [ 13.795880] [drm] pitch is 5632 [ 13.796267] fbcon: radeondrmfb (fb0) is primary device [ 14.203608] elantech: retrying ps2 command 0xf8 (1). [ 14.345748] Console: switching to colour frame buffer device 170x48 [ 14.354482] fb0: radeondrmfb frame buffer device [ 14.354487] drm: registered panic notifier [ 14.354500] [drm] Initialized radeon 2.11.0 20080528 for 0000:00:01.0 on minor 0 [ 14.354662] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.354819] snd_hda_intel 0000:00:14.2: setting latency timer to 64 [ 14.463248] hda_codec: CX20588: BIOS auto-probing. [ 14.464228] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8 [ 14.772119] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9 [ 16.795551] EXT4-fs (dm-1): re-mounted. Opts: commit=900 [ 17.002059] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: commit=900 [ 17.084630] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: commit=900 [ 17.543876] Adding 3502076k swap on /dev/mapper/gunvor-swap_1. Priority:-1 extents:1 across:3502076k [ 29.125462] atl1c 0000:06:00.0: irq 41 for MSI/MSI-X [ 29.125589] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 31.511669] atl1c 0000:06:00.0: irq 41 for MSI/MSI-X [ 31.511765] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 31.579223] atl1c 0000:06:00.0: irq 41 for MSI/MSI-X [ 31.579319] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 35.410718] atl1c 0000:06:00.0: irq 41 for MSI/MSI-X [ 35.410813] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 35.478624] atl1c 0000:06:00.0: irq 41 for MSI/MSI-X [ 35.478721] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2011-12-30 10:08 ` Kim Lidström @ 2011-12-30 10:30 ` Mohammed Shafi 2011-12-30 10:41 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Mohammed Shafi @ 2011-12-30 10:30 UTC (permalink / raw) To: ath9k-devel On Fri, Dec 30, 2011 at 3:38 PM, Kim Lidstr?m <dexter@lacto.se> wrote: > Nope, that didn't help at all. I tried disabling ASPM and that didn't help > (Turns out that, according to dmesg it was turned off to begin with) > oh ok , instead of browsing let me try pumping TCP/UDP bidirectional. > I'm attaching my dmesg, in case that will help. I will try to set up > netconsole today. sure that will be highly helpful > > On Fri, Dec 30, 2011 at 10:10 AM, Mohammed Shafi > <shafi.wireless@gmail.com> wrote: >> On Fri, Dec 30, 2011 at 12:47 PM, Kim Lidstr?m <dexter@lacto.se> wrote: >>> **forgot the mailing list** >>> >>> I ran lspci and attached the output in a file. >>> I'm new to this mailing list thing so if I can't attach files just >>> tell me! (I'm more used to IRC and pastebins ;)) >> >> if you got time please read through >> http://linuxwireless.org/en/users/Documentation/ASPM >> and see if disabling ASPM helps. please be very careful >> as if we do something wrong it might make the hardware >> unusable. i am just browsing with the AR9485 card >> >>> >>> I will definitely try to get netconsole running today. >>> >>> I can work around this problem by having the network cable connected. >>> Then it simply won't crash - probably because it isn't connected to a >>> wireless network then. I am using wicd so it's taking care of that. >>> >>> _______________________________________________ >>> ath9k-devel mailing list >>> ath9k-devel at lists.ath9k.org >>> https://lists.ath9k.org/mailman/listinfo/ath9k-devel >>> >> >> >> >> -- >> shafi -- shafi ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2011-12-30 10:30 ` Mohammed Shafi @ 2011-12-30 10:41 ` Kim Lidström 2011-12-30 11:58 ` Paolo 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2011-12-30 10:41 UTC (permalink / raw) To: ath9k-devel Yeah, you could try that. But thing is that it doesn't seem to be related to some specific type, or amount, of traffic. Sometimes the kernel hangs before I even get a chance to connect to my network and sometimes I can be connected for an hour or so before it hangs. No matter how much traffic I pushed over it. And it never seems to hang if I start the computer with the network cable in, connect to my wired network and then connect to my wifi network. Or at least it doesn't hang for a long while that way. I have found other people with the same (or similar) issues when I have researched on google. ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2011-12-30 10:41 ` Kim Lidström @ 2011-12-30 11:58 ` Paolo 2011-12-30 12:18 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Paolo @ 2011-12-30 11:58 UTC (permalink / raw) To: ath9k-devel Kim Lidstr?m ha scritto: > Yeah, you could try that. > But thing is that it doesn't seem to be related to some specific type, > or amount, of traffic. > Sometimes the kernel hangs before I even get a chance to connect to my > network and sometimes > I can be connected for an hour or so before it hangs. No matter how > much traffic I pushed over it. > And it never seems to hang if I start the computer with the network > cable in, connect to my wired network > and then connect to my wifi network. Or at least it doesn't hang for a > long while that way. > I have found other people with the same (or similar) issues when I > have researched on google. I'm having troubles too with the same chipset and same kernel. Lately I've tried to disable power management at boot, with "iwconfig wlan0 power off" and until now this seems to have fixed my problems. But I can't use much the netbook in these days, so I don't know if it's just an illusion. Anyway you could try it. Happy new year to all people of lists and above all to developers! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20111230/3dd51ded/attachment.htm ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2011-12-30 11:58 ` Paolo @ 2011-12-30 12:18 ` Kim Lidström 2011-12-31 15:58 ` Peter Stuge 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2011-12-30 12:18 UTC (permalink / raw) To: ath9k-devel Hey! Thanks for the tip, but unfortunately that didn't help either.. I'm not sure if wicd is the problem, but I think I recalled that it paniced on me earlier without wicd too. Also, even though I still have the cable in it will still search for networks (Right? at least it looks like it when it updates the view every few seconds) Just now it locked for me during the "Authentication" stage before I got a chance to get an IP. But I'm pretty certain that it isn't wpa_supplicant because it has locked up on me at earlier stages (One time it locked up the second I loaded ath9k) and later (One time it took close to 2-3 hours before it locked). I will investigate this further. I tried turning off ASPM (Which was already off to begin with according to dmesg) and power management for the interface and the system still locks up on me. I think it is really strange that I can't get a kernel dump even though CONFIG_MAGIC_SYSRQ=y and kernel.sysrq=1. But, as I wrote earlier, I will investigate and see if I can get netconsole running and see if that spits out anything useful. I have a lot to do today, the day before new years and all :) Btw, do you have any recommendations on how I will do this? Because if I connect the network cable I have noticed that it simply won't crash. And if I have the network cable in, connect to a wifi network and then unplugs the network cable it doesn't crash either (or it simply takes a really long time for it, but I haven't noticed that) But I'm constantly monitoring this thread to see what happens! ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2011-12-30 12:18 ` Kim Lidström @ 2011-12-31 15:58 ` Peter Stuge 2012-01-02 20:26 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Peter Stuge @ 2011-12-31 15:58 UTC (permalink / raw) To: ath9k-devel Kim Lidstr?m wrote: > netconsole .. > Btw, do you have any recommendations on how I will do this? Because > if I connect the network cable I have noticed that it simply won't > crash. There are a few other alternatives for getting the kernel messages, maybe you can use one of them.. * serial console By far the best "soft" solution, better than netconsole, but needs a serial port in the machine, or in a docking station. * USB debug device Requires you to buy a $80 debug device and wait for it to arrive, and is problematic like netconsole because both likely require the PCI bus to be working properly, which I guess is not the case. * cpld or fpga implementing a serial console on lpc Requires you to buy and develop debug hardware to find the problem with the Atheros hardware and/or driver. * logic analyzer on lpc You could then modify the serial console driver slightly to simply output onto the LPC bus, instead of talking with the UART. * PCIe bus analyzer The only really conclusive way to find out what the problem is with the card, but expensive. netconsole is imo useless when the system is locking up. It's a very difficult situation to debug. //Peter ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2011-12-31 15:58 ` Peter Stuge @ 2012-01-02 20:26 ` Kim Lidström 2012-01-02 21:45 ` Peter Stuge 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-02 20:26 UTC (permalink / raw) To: ath9k-devel Hello!Sorry for the late response, I've been busy with new years and stuff. I have, in fact, ordered USB to serial adapters to see if that will work (It was cheap enough so it?is worth a shot) Because I don't have any of these other devices in my possession all I can do is to wait until they arrive and pray they will work. I confirmed that there are drivers for them so that shouldn't be an issue - I'm guessing the issue will (still) be the lockup though. ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-02 20:26 ` Kim Lidström @ 2012-01-02 21:45 ` Peter Stuge 0 siblings, 0 replies; 57+ messages in thread From: Peter Stuge @ 2012-01-02 21:45 UTC (permalink / raw) To: ath9k-devel Kim Lidstr?m wrote: > I have, in fact, ordered USB to serial adapters I don't think the kernel supports console on USB-serial. You would need a special USB debug device, and one of the USB ports must have explicit EHCI Debug Port support. //Peter ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2011-12-30 5:27 [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 Kim Lidström 2011-12-30 6:07 ` Mohammed Shafi @ 2012-01-02 21:46 ` Adrian Chadd 2012-01-03 0:13 ` Kim Lidström 2012-01-12 20:02 ` Mihai Moldovan 2 siblings, 1 reply; 57+ messages in thread From: Adrian Chadd @ 2012-01-02 21:46 UTC (permalink / raw) To: ath9k-devel On 29 December 2011 21:27, Kim Lidstr?m <dexter@lacto.se> wrote: > Hello! > I have an Acer Aspire 5250 with an "Acer Nplify 802.11b/g/n" wlan > adapter (Never heard of it > before.. But apparently it has a AR9485) that I'm having problems with. > I can connect to wlans but after a while the kernel hangs. I can't do > anything. I can't even produce a > kernel dump. > I even tried the latest version of comp-wireless (3.2-rc6-3) and it > was even worse! It crashed the system almost instantly. When it hangs, does it hang at console, or are you in X? Adrian ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-02 21:46 ` Adrian Chadd @ 2012-01-03 0:13 ` Kim Lidström 2012-01-03 1:01 ` Adrian Chadd 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-03 0:13 UTC (permalink / raw) To: ath9k-devel It hangs in the console. ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-03 0:13 ` Kim Lidström @ 2012-01-03 1:01 ` Adrian Chadd 2012-01-03 1:22 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Adrian Chadd @ 2012-01-03 1:01 UTC (permalink / raw) To: ath9k-devel On 2 January 2012 16:13, Kim Lidstr?m <dexter@lacto.se> wrote: > It hangs in the console. Would you please recompile ath/ath9k with the debugging option enabled? Then you could try enabling all of the debugging (and use dmesg or whatnot to set the console logging level) to log ath9k register accesses. Hopefully we'll find something is going on each time this hangs - eg, the NIC is going to sleep for some reason, or a bogus value written to a register/descriptor. Adrian ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-03 1:01 ` Adrian Chadd @ 2012-01-03 1:22 ` Kim Lidström 2012-01-03 1:25 ` Adrian Chadd 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-03 1:22 UTC (permalink / raw) To: ath9k-devel I will definitely do that!Just for clarity, would I download the latest compat-wireless andcompile that or the 3.1.6 kernel? ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-03 1:22 ` Kim Lidström @ 2012-01-03 1:25 ` Adrian Chadd 2012-01-03 1:31 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Adrian Chadd @ 2012-01-03 1:25 UTC (permalink / raw) To: ath9k-devel On 2 January 2012 17:22, Kim Lidstr?m <dexter@lacto.se> wrote: > I will definitely do that!Just for clarity, would I download the > latest compat-wireless andcompile that or the 3.1.6 kernel? Oh! _I_ always suggest the latest compat-wireless. :) Adrian ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-03 1:25 ` Adrian Chadd @ 2012-01-03 1:31 ` Kim Lidström 2012-01-03 2:52 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-03 1:31 UTC (permalink / raw) To: ath9k-devel Great! I'm on it! (Btw, sorry if the last message was sent twice. I accidentally a little) ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-03 1:31 ` Kim Lidström @ 2012-01-03 2:52 ` Kim Lidström 2012-01-03 3:06 ` Adrian Chadd 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-03 2:52 UTC (permalink / raw) To: ath9k-devel So... Is it CONFIG_ATH9K_DEBUGFS in config.mk I want to enable? ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-03 2:52 ` Kim Lidström @ 2012-01-03 3:06 ` Adrian Chadd 2012-01-03 3:10 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Adrian Chadd @ 2012-01-03 3:06 UTC (permalink / raw) To: ath9k-devel On 2 January 2012 18:52, Kim Lidstr?m <dexter@lacto.se> wrote: > So... Is it CONFIG_ATH9K_DEBUGFS in config.mk I want to enable? I think that's one of them. There should also be a general ATH debugging. I don't have a linux kernel here to look at right at the moment, sorry :( Adrian ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-03 3:06 ` Adrian Chadd @ 2012-01-03 3:10 ` Kim Lidström 2012-01-03 3:56 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-03 3:10 UTC (permalink / raw) To: ath9k-devel No it's okay. A little Googling pointed me in the right direction (*COUGH* CONFIG_ATH_DEBUG). Why didn't I think of that from the start? ;) ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-03 3:10 ` Kim Lidström @ 2012-01-03 3:56 ` Kim Lidström 2012-01-03 3:57 ` Adrian Chadd 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-03 3:56 UTC (permalink / raw) To: ath9k-devel Hi again! I have enabled debugging in ath (and ath9k) and was unable to salvage what I think is an infinite loop. But I'm not the expert :) I'm attaching the log (gzipped because it is rather big. I didn't care for filtering out *ANYTHING* just in case I would filter out anything important) That is all I managed to get using compat-wireless-3.2-rc6-3 up until it locked. -------------- next part -------------- A non-text attachment was scrubbed... Name: everything.log.gz Type: application/x-gzip Size: 371981 bytes Desc: not available Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120103/848d88c3/attachment-0001.bin ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-03 3:56 ` Kim Lidström @ 2012-01-03 3:57 ` Adrian Chadd 2012-01-03 4:06 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Adrian Chadd @ 2012-01-03 3:57 UTC (permalink / raw) To: ath9k-devel .. since it likely didn't get the logs to the disk when it locked up, can you take a screenshot when it did lockup? adrian ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-03 3:57 ` Adrian Chadd @ 2012-01-03 4:06 ` Kim Lidström 2012-01-03 10:55 ` Adrian Chadd 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-03 4:06 UTC (permalink / raw) To: ath9k-devel Well, what's there to take a screenshot of? No message, no nothing. It just silently locks on me. Also, what I meant to say was that I was *ABLE* to salvage what I think is an infinite loop of some sort. If you look at the bottom of the log (Didn't you get it? Did I accidentally gain? :)) it just repeats the same stuff over and over again. ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-03 4:06 ` Kim Lidström @ 2012-01-03 10:55 ` Adrian Chadd 2012-01-03 20:50 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Adrian Chadd @ 2012-01-03 10:55 UTC (permalink / raw) To: ath9k-devel On 2 January 2012 20:06, Kim Lidstr?m <dexter@lacto.se> wrote: > Well, what's there to take a screenshot of? No message, no nothing. It > just silently locks on me. > > Also, what I meant to say was that I was *ABLE* to salvage what I > think is an infinite loop of some sort. > If you look at the bottom of the log (Didn't you get it? Did I > accidentally gain? :)) it just repeats the same stuff > over and over again. Right. So it's not actually _hung_ per se, but the system is totally unresponsive? Lots of this: Jan 3 04:46:02 localhost kernel: [ 559.995979] ath: New interrupt mask 0xf4001443 Jan 3 04:46:02 localhost kernel: [ 559.995982] ath: new IMR 0x81801145 Jan 3 04:46:02 localhost kernel: [ 559.995984] ath: disable IER Jan 3 04:46:02 localhost kernel: [ 559.995995] ath: AR_IMR 0x81801145 IER 0x1 Jan 3 04:46:02 localhost kernel: [ 559.996007] ath: New interrupt mask 0xf4001473 Jan 3 04:46:02 localhost kernel: [ 559.996010] ath: new IMR 0x81801175 Jan 3 04:46:02 localhost kernel: [ 559.996012] ath: enable IER Jan 3 04:46:02 localhost kernel: [ 559.996030] ath: New interrupt mask 0xf4001443 Jan 3 04:46:02 localhost kernel: [ 559.996033] ath: new IMR 0x81801145 Jan 3 04:46:02 localhost kernel: [ 559.996036] ath: disable IER Jan 3 04:46:02 localhost kernel: [ 559.996045] ath: AR_IMR 0x81801175 IER 0x1 Jan 3 04:46:02 localhost kernel: [ 559.996057] ath: New interrupt mask 0xf4001473 Jan 3 04:46:02 localhost kernel: [ 559.996060] ath: new IMR 0x81801175 Jan 3 04:46:02 localhost kernel: [ 559.996063] ath: enable IER .. ok. Well, if it _is_ stuck in an interrupt loop, surely the system would just be very slow, rather than totally hung? If you're receiving traffic then it'd make sense that you'd be seeing a lot of interrupts, but that's a _lot_ of interrupts.. Try applying this patch, in drivers/net/wireless/ath/ath9k: --- main.c.orig 2012-01-03 02:50:08.000000000 -0800 +++ main.c 2012-01-03 02:50:53.000000000 -0800 @@ -793,6 +793,10 @@ * value to insure we only process bits we requested. */ ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */ + + ath_dbg(common, ATH_DBG_INTERRUPT, "status: 0x%x, mask: 0x%x\n", + status, ah->imask); + status &= ah->imask; /* discard unasked-for bits */ /* .. then redo the testing, but this time just enable ATH_DBG_INTERRUPT rather than everything. That'll log exactly what the interrupt routine returns. And another patch, which logs the contents of the AR_ISR* registers (assuming you are using an ar9003 or later): --- ar9003_mac.c.orig 2012-01-03 02:46:52.000000000 -0800 +++ ar9003_mac.c 2012-01-03 02:49:51.000000000 -0800 @@ -186,11 +186,21 @@ sync_cause = REG_READ(ah, AR_INTR_SYNC_CAUSE) & AR_INTR_SYNC_DEFAULT; + ath_dbg(common, ATH_DBG_INTERRUPT, "sync_cause: %d, isr: 0x%x\n", + sync_cause, isr); + *masked = 0; if (!isr && !sync_cause) return false; + ath_dbg(common, ATH_DBG_INTERRUPT, + "s0: 0x%x, s1: 0x%x, s2: 0x%x, s5: 0x%x\n", + REG_READ(ah, AR_ISR_S0), + REG_READ(ah, AR_ISR_S1), + REG_READ(ah, AR_ISR_S2), + REG_READ(ah, AR_ISR_S5)); + if (isr) { if (isr & AR_ISR_BCNMISC) { u32 isr2; ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-03 10:55 ` Adrian Chadd @ 2012-01-03 20:50 ` Kim Lidström 2012-01-03 21:29 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-03 20:50 UTC (permalink / raw) To: ath9k-devel Hello! I just took a look at config.mk and the option ATH_DGB_INTERRUPT doesn't exist. In fact, grepping for ATH gives me nothing about interrupts in the config file. I have compat-wireless-3.2-rc6-3. ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-03 20:50 ` Kim Lidström @ 2012-01-03 21:29 ` Kim Lidström 2012-01-04 12:02 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-03 21:29 UTC (permalink / raw) To: ath9k-devel Oh, nevermind that. My brain paniced a little :) ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-03 21:29 ` Kim Lidström @ 2012-01-04 12:02 ` Kim Lidström 2012-01-04 12:10 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-04 12:02 UTC (permalink / raw) To: ath9k-devel Hello there! Sorry for my late reply - but I did actually add that patch and I did recompile compat-wireless with it. I also changed the debug options to ATH_DBG_INTERRUPT. I think we might have found something interesting. It looks like the registers are just containing 0x0 - From what I could tell by glancing at the log. It is also interesting that we seem to have caught a crash. I attached the log unedited so you can look at it! -------------- next part -------------- A non-text attachment was scrubbed... Name: everything.log.gz Type: application/x-gzip Size: 695469 bytes Desc: not available Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120104/26d5fb5f/attachment-0001.bin ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-04 12:02 ` Kim Lidström @ 2012-01-04 12:10 ` Kim Lidström 2012-01-05 1:29 ` Adrian Chadd 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-04 12:10 UTC (permalink / raw) To: ath9k-devel Oh sorry. I forgot to say that I can now see a pattern in the lockups. It seems to lock up when obtaining an IP after authentication. Oh, btw, I'm using WPA/WPA2 PSK. Maybe I should have said that earlier, if it matters? Sorry about that. ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-04 12:10 ` Kim Lidström @ 2012-01-05 1:29 ` Adrian Chadd 2012-01-05 14:50 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Adrian Chadd @ 2012-01-05 1:29 UTC (permalink / raw) To: ath9k-devel On 4 January 2012 04:10, Kim Lidstr?m <dexter@lacto.se> wrote: > Oh sorry. I forgot to say that I can now see a pattern in the lockups. > It seems to lock up when obtaining an IP after authentication. > Oh, btw, I'm using WPA/WPA2 PSK. Maybe I should have said that > earlier, if it matters? Hi, If the sync and async ISR registers are 0x0, then it means something else is triggering an interrupt on a shared bus and it's not being properly handled. Someone else in another thread had a similar issue (and it showed up as an interrupt storm); when we debugged it, it was a very badly behaving ethernet driver. So, can you please see if any devices share the same interrupt line as the wireless device. Thanks! Adrian ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-05 1:29 ` Adrian Chadd @ 2012-01-05 14:50 ` Kim Lidström 2012-01-05 15:21 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-05 14:50 UTC (permalink / raw) To: ath9k-devel How would I see that? ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-05 14:50 ` Kim Lidström @ 2012-01-05 15:21 ` Kim Lidström 2012-01-05 17:15 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-05 15:21 UTC (permalink / raw) To: ath9k-devel Hello there! I am attaching the output of /proc/interrupts and dmesg (when I am not using the wlan) until I get a reply. Hopefully that will be useful! -------------- next part -------------- A non-text attachment was scrubbed... Name: dmesg.txt.gz Type: application/x-gzip Size: 16537 bytes Desc: not available Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120105/ccb32fba/attachment-0002.bin -------------- next part -------------- A non-text attachment was scrubbed... Name: interrupts.txt.gz Type: application/x-gzip Size: 486 bytes Desc: not available Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120105/ccb32fba/attachment-0003.bin ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-05 15:21 ` Kim Lidström @ 2012-01-05 17:15 ` Kim Lidström 2012-01-05 23:08 ` Adrian Chadd 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-05 17:15 UTC (permalink / raw) To: ath9k-devel Also, here's the output of lspci -v. -------------- next part -------------- A non-text attachment was scrubbed... Name: lspci.txt.gz Type: application/x-gzip Size: 1679 bytes Desc: not available Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120105/1072861a/attachment.bin ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-05 17:15 ` Kim Lidström @ 2012-01-05 23:08 ` Adrian Chadd 2012-01-05 23:54 ` Peter Stuge 0 siblings, 1 reply; 57+ messages in thread From: Adrian Chadd @ 2012-01-05 23:08 UTC (permalink / raw) To: ath9k-devel Ah! 19: 44 4337 IO-APIC-fasteoi ahci, ath9k Try unloading AHCI? (usb 3.0 ?) Adrian ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-05 23:08 ` Adrian Chadd @ 2012-01-05 23:54 ` Peter Stuge 2012-01-06 1:02 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Peter Stuge @ 2012-01-05 23:54 UTC (permalink / raw) To: ath9k-devel Adrian Chadd wrote: > 19: 44 4337 IO-APIC-fasteoi ahci, ath9k > > Try unloading AHCI? (usb 3.0 ?) AHCI is the native SATA protocol. (USB 3.0 HC are xhci.) Difficult to do without ahci since it's the SATA API to the chipset. But, the chipset will also be able to run in old style ATA compatibility mode. If you are lucky Kim, you can select SATA mode Compatible in your BIOS setup screen, then you may be able to run the disk controller on a different interrupt, which would be very interesting for debugging purposes. //Peter ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-05 23:54 ` Peter Stuge @ 2012-01-06 1:02 ` Kim Lidström 2012-01-06 1:16 ` Peter Stuge 2012-01-06 8:49 ` Adrian Chadd 0 siblings, 2 replies; 57+ messages in thread From: Kim Lidström @ 2012-01-06 1:02 UTC (permalink / raw) To: ath9k-devel > But, the chipset will also be able to run in old style ATA > compatibility mode. If you are lucky Kim, you can select SATA mode > Compatible in your BIOS setup screen, then you may be able to run the > disk controller on a different interrupt, which would be very > interesting for debugging purposes. I tried enabling that.. I think.BIOS had a settings called "SATA Mode" that I switched to IDE. That did not seem to do the trickbecause ahci it still loaded at boot (udev...) and I can't rmmod it because, apparently, it is being used. I event went as far as trying to rmmod all the dependencies (libahci and some other one) that I found in lsmod. I will investigate further if it has to be done for this to come to an end! (Man, I would like to be able to use this laptop soon :D) ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-06 1:02 ` Kim Lidström @ 2012-01-06 1:16 ` Peter Stuge 2012-01-06 1:23 ` Kim Lidström 2012-01-06 8:49 ` Adrian Chadd 1 sibling, 1 reply; 57+ messages in thread From: Peter Stuge @ 2012-01-06 1:16 UTC (permalink / raw) To: ath9k-devel Kim Lidstr?m wrote: > > But, the chipset will also be able to run in old style ATA > > compatibility mode. If you are lucky Kim, you can select SATA mode > > Compatible in your BIOS setup screen, then you may be able to run the > > disk controller on a different interrupt, which would be very > > interesting for debugging purposes. > > I tried enabling that.. I think.BIOS had a settings called "SATA Mode" > that I switched to IDE. Yes that's the right setting. > That did not seem to do the trickbecause ahci it still loaded at > boot (udev...) Ok, so build a monolithic kernel without ahci but with the correct libata driver. //Peter ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-06 1:16 ` Peter Stuge @ 2012-01-06 1:23 ` Kim Lidström 2012-01-06 1:58 ` Peter Stuge 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-06 1:23 UTC (permalink / raw) To: ath9k-devel > Ok, so build a monolithic kernel without ahci but with the correct > libata driver. Actually I, just a minute ago, blacklisted the ahci module in the kernel with modprobe.blacklist=ahci with the result that it couldn't find any drives (Still in IDE mode). I can also see that libata is, in fact, loaded so it should basically be the same thing and not building a new kernel without ahci and libata... Right? I'll try to rebuild the initramfs and see if I can include libata in that. ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-06 1:23 ` Kim Lidström @ 2012-01-06 1:58 ` Peter Stuge 2012-01-06 2:54 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Peter Stuge @ 2012-01-06 1:58 UTC (permalink / raw) To: ath9k-devel Kim Lidstr?m wrote: > > Ok, so build a monolithic kernel without ahci but with the > > correct libata driver. > > Actually I, just a minute ago, blacklisted the ahci module in the > kernel with modprobe.blacklist=ahci with the result that it > couldn't find any drives (Still in IDE mode). Couldn't find any, or couldn't find the one that was configured? Would be nice to have boot output, but that requires external console. Netconsole would do here. > I'll try to rebuild the initramfs and see if I can include libata > in that. libata is part of the kernel, not initramfs. Blacklisting the ahci module may be good enough. //Peter ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-06 1:58 ` Peter Stuge @ 2012-01-06 2:54 ` Kim Lidström 0 siblings, 0 replies; 57+ messages in thread From: Kim Lidström @ 2012-01-06 2:54 UTC (permalink / raw) To: ath9k-devel I tried loading libata from the console in the ramfs, but it can't find a disk at all until I load ahci. ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-06 1:02 ` Kim Lidström 2012-01-06 1:16 ` Peter Stuge @ 2012-01-06 8:49 ` Adrian Chadd 2012-01-06 14:46 ` Kim Lidström 1 sibling, 1 reply; 57+ messages in thread From: Adrian Chadd @ 2012-01-06 8:49 UTC (permalink / raw) To: ath9k-devel On 5 January 2012 17:02, Kim Lidstr?m <dexter@lacto.se> wrote: > I will investigate further if it has to be done for this to come to an end! > (Man, I would like to be able to use this laptop soon :D) Well, I just wonder if the ahci/usb code is handling this particular case very, very badly. (And it's not using MSI as far as I can tell; although the later NICs apparently support it, I haven't done much more then peripherally look at the MSI interrupt handling code.) Adrian ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-06 8:49 ` Adrian Chadd @ 2012-01-06 14:46 ` Kim Lidström 2012-01-06 18:37 ` Adrian Chadd [not found] ` <CAD2nsn0=mj2nGvKuimNLo7sVLVMprhENud8vF=+oB_ApVooP0A@mail.gmail.com> 0 siblings, 2 replies; 57+ messages in thread From: Kim Lidström @ 2012-01-06 14:46 UTC (permalink / raw) To: ath9k-devel Well, I can't really unload it because it won't find any disks then. I have played around with it now. You're the experts; how would one go forward with this? Should I mail the LKML and ask them if they feel like fixing ahci or is it something that you guys are familiar with? ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-06 14:46 ` Kim Lidström @ 2012-01-06 18:37 ` Adrian Chadd 2012-01-06 19:10 ` Adrian Chadd [not found] ` <CAD2nsn0=mj2nGvKuimNLo7sVLVMprhENud8vF=+oB_ApVooP0A@mail.gmail.com> 1 sibling, 1 reply; 57+ messages in thread From: Adrian Chadd @ 2012-01-06 18:37 UTC (permalink / raw) To: ath9k-devel On 6 January 2012 06:46, Kim Lidstr?m <dexter@lacto.se> wrote: > Well, I can't really unload it because it won't find any disks then. I > have played around with it now. Hm. I think I mis-read what I saw from you. So: Jan 4 12:53:02 localhost kernel: [ 35.987882] ath: sync_cause: 0, isr: 0x10 Jan 4 12:53:02 localhost kernel: [ 35.987892] ath: s0: 0x0, s1: 0x0, s2: 0x0, s5: 0x0 .. so the ISR is non-zero. That 0x10 is "AR_ISR_RXEOL". So it looks like an empty RX descriptor list/ring. I don't know anything about the AR9300 and later TX/RX descriptor ring stuff though as I've not yet looked at porting it to FreeBSD, so I don't know what RXEOL does mean here. (For previous NICs it means that it's hit the end of the descriptor list (ie a NULL next/link pointer) and it can't possibly write anything more. So the driver SHOULD clear RXEOL from the mask and re-enable it once more descriptors have been put onto the descriptor list for the hardware to write to. For AR93xx and later, no idea. Shafi and others, can you please help Kim with this? I don't know what AR_ISR_RXEOL means for AR93xx and later. It could be that EDMA isn't being enabled in the driver? Or RXEOL isn't being disabled/enabled correctly? I don't know the ring based descriptor stuff yet :) Thanks, Adrian ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-06 18:37 ` Adrian Chadd @ 2012-01-06 19:10 ` Adrian Chadd 2012-01-06 20:33 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Adrian Chadd @ 2012-01-06 19:10 UTC (permalink / raw) To: ath9k-devel On 6 January 2012 10:37, Adrian Chadd <adrian@freebsd.org> wrote: > Shafi and others, can you please help Kim with this? I don't know what > AR_ISR_RXEOL means for AR93xx and later. It could be that EDMA isn't > being enabled in the driver? Or RXEOL isn't being disabled/enabled > correctly? I don't know the ring based descriptor stuff yet :) ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-06 19:10 ` Adrian Chadd @ 2012-01-06 20:33 ` Kim Lidström 2012-01-07 1:25 ` Kim Lidström 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-06 20:33 UTC (permalink / raw) To: ath9k-devel Hello there! I applied a little patch to ath_rx_tasklet() (I applied a patch so you can see what I edited) I am also applying the log that I salvaged after I had done my modifications. -------------- next part -------------- A non-text attachment was scrubbed... Name: recv.c.diff Type: application/octet-stream Size: 2880 bytes Desc: not available Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120106/f5480fad/attachment-0002.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: everything-after-patch.log Type: application/octet-stream Size: 446464 bytes Desc: not available Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120106/f5480fad/attachment-0003.obj ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-06 20:33 ` Kim Lidström @ 2012-01-07 1:25 ` Kim Lidström 2012-01-09 5:27 ` Mohammed Shafi 0 siblings, 1 reply; 57+ messages in thread From: Kim Lidström @ 2012-01-07 1:25 UTC (permalink / raw) To: ath9k-devel After patching ath_rx_tasklet() with my debug statements and playing around a little I have not become smarter whatsoever. I will continue my own little investigation here. I might have accidentally done something weird earlier so I am attaching the diff to show what I edited and the log afterwards (with my debug prints) -------------- next part -------------- A non-text attachment was scrubbed... Name: recv.c.diff Type: application/octet-stream Size: 2880 bytes Desc: not available Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120107/16d57a09/attachment-0002.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: everything-after-patch.log Type: application/octet-stream Size: 446464 bytes Desc: not available Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120107/16d57a09/attachment-0003.obj ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-07 1:25 ` Kim Lidström @ 2012-01-09 5:27 ` Mohammed Shafi 2012-01-09 13:13 ` Mohammed Shafi 0 siblings, 1 reply; 57+ messages in thread From: Mohammed Shafi @ 2012-01-09 5:27 UTC (permalink / raw) To: ath9k-devel On Sat, Jan 7, 2012 at 6:55 AM, Kim Lidstr?m <dexter@lacto.se> wrote: > After patching ath_rx_tasklet() with my debug statements and playing around > a little I have not become smarter whatsoever. > I will continue my own little investigation here. > > I might have accidentally done something weird earlier so I am > attaching the diff > to show what I edited and the log afterwards (with my debug prints) though unrelated we can give a wild try with this patch http://marc.info/?l=linux-wireless&m=132595161516806&w=2 download from the raw message. i can analyze the rx tasklet. > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel > -- shafi ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-09 5:27 ` Mohammed Shafi @ 2012-01-09 13:13 ` Mohammed Shafi [not found] ` <9F2C1487-033C-4F31-958E-A27304B5F56F@lacto.se> 0 siblings, 1 reply; 57+ messages in thread From: Mohammed Shafi @ 2012-01-09 13:13 UTC (permalink / raw) To: ath9k-devel > though unrelated we can give a wild try with this patch > http://marc.info/?l=linux-wireless&m=132595161516806&w=2 > download from the raw message. i can analyze the rx tasklet. hi, also did you get some trace with netconsole -- shafi ^ permalink raw reply [flat|nested] 57+ messages in thread
[parent not found: <9F2C1487-033C-4F31-958E-A27304B5F56F@lacto.se>]
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 [not found] ` <9F2C1487-033C-4F31-958E-A27304B5F56F@lacto.se> @ 2012-01-10 12:12 ` Mohammed Shafi [not found] ` <D2048E57-64A4-4E58-BED8-D64CFC5466EA@lacto.se> 0 siblings, 1 reply; 57+ messages in thread From: Mohammed Shafi @ 2012-01-10 12:12 UTC (permalink / raw) To: ath9k-devel On Tue, Jan 10, 2012 at 6:24 AM, Kim Lidstr?m <dexter@lacto.se> wrote: > >> hi, also did you get some trace with netconsole > > No I didn't. netconsole didn't want to sent any messages related to > ath. But if you wish to elaborate what you said about typing out the > dmesg levels I can definitely try that! > > I got my USB to Serial adapters today! I'm just waiting for the null > modem now :) > > And I will try that patch too! if we very much suspect the rx path, attache is a debug patch where we can find out why bf is NULL. we should not get 'b'f NULL when are doing a good amount of rx, other wise not an issue > -- shafi -------------- next part -------------- A non-text attachment was scrubbed... Name: rx-debug.patch Type: text/x-diff Size: 2270 bytes Desc: not available Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120110/727dea00/attachment.patch ^ permalink raw reply [flat|nested] 57+ messages in thread
[parent not found: <D2048E57-64A4-4E58-BED8-D64CFC5466EA@lacto.se>]
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 [not found] ` <D2048E57-64A4-4E58-BED8-D64CFC5466EA@lacto.se> @ 2012-01-12 8:29 ` Mohammed Shafi 0 siblings, 0 replies; 57+ messages in thread From: Mohammed Shafi @ 2012-01-12 8:29 UTC (permalink / raw) To: ath9k-devel On Thu, Jan 12, 2012 at 1:36 AM, Kim Lidstr?m <dexter@lacto.se> wrote: > And here is a complete log. thanks, don't know why desc processing is not completed. it fails frequently in your case. adding list -- shafi ^ permalink raw reply [flat|nested] 57+ messages in thread
[parent not found: <CAD2nsn0=mj2nGvKuimNLo7sVLVMprhENud8vF=+oB_ApVooP0A@mail.gmail.com>]
[parent not found: <CAFopJHe0br-PL_f=XwVvmLZWNvY66u+dY9eeDKeXieaG8GH6pQ@mail.gmail.com>]
[parent not found: <CAD2nsn12MJ2EiS3bYR35Q=Q-nyYOZQepDe9eEfn5BTP7sJBgdQ@mail.gmail.com>]
[parent not found: <17C01D34-E12D-4E2F-8FED-A24C175077A2@lacto.se>]
[parent not found: <CAD2nsn35no_3bMgF__Ra7WjMwHyY-donA-KuCw06QjBbfpSkmQ@mail.gmail.com>]
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 [not found] ` <CAD2nsn35no_3bMgF__Ra7WjMwHyY-donA-KuCw06QjBbfpSkmQ@mail.gmail.com> @ 2012-01-07 15:29 ` Mohammed Shafi [not found] ` <BF537ED3-9C83-42C9-BCAD-F1D418E56A48@lacto.se> 1 sibling, 0 replies; 57+ messages in thread From: Mohammed Shafi @ 2012-01-07 15:29 UTC (permalink / raw) To: ath9k-devel On Sat, Jan 7, 2012 at 8:58 PM, Mohammed Shafi <shafi.wireless@gmail.com> wrote: > Hi Kim, > > i was looking at you debug message in rx tasklet. in the second > iteration bf is NULL ie we are not getting buffers. let me also a put > the print here and see. > > PS: > also the warning you had seemed to have ath_radio_disable, looks like > the card is doing nothing (because of rx eol interrrupts) which were > all removed in the latest compat wireless. any way you are still > getting the freeze in the latest too. > > -- > shafi -- shafi ^ permalink raw reply [flat|nested] 57+ messages in thread
[parent not found: <BF537ED3-9C83-42C9-BCAD-F1D418E56A48@lacto.se>]
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 [not found] ` <BF537ED3-9C83-42C9-BCAD-F1D418E56A48@lacto.se> @ 2012-01-07 15:45 ` Kim Lidström [not found] ` <CAD2nsn1wS3gAPBHzaSaBo33hQxr2ePM2P8pnBqmznSw+=Jhtjg@mail.gmail.com> 1 sibling, 0 replies; 57+ messages in thread From: Kim Lidström @ 2012-01-07 15:45 UTC (permalink / raw) To: ath9k-devel > From: Kim Lidstr?m <dexter@lacto.se> > Date: January 7, 2012 4:43:11 PM GMT+01:00 > To: Mohammed Shafi <shafi.wireless@gmail.com> > Cc: ath9k-devel at list.ath9k.org, Adrian Chadd <adrian@freebsd.org> > Subject: Re: [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 > > Hello there! > I simply can't get any level 8 with dmesg (I have no idea why) and when > I ask around on IRC i mainly get confused answers - like level 8 shouldn't > even be there (Don't get me wrong here! I'm not saying you're lying :)) > > I am running Arch Linux i686 and I have util-linux 2.20.1 installed. > > But I think it is interesting that when I connect this laptop to my macbook > (or anything for that matter) with a network cable it simply won't lock up. > I am attaching a log from the laptop as it is right now, with a network > cable connected while being connected to the wlan. > Because of its rather large size I am gzipiing it. > > If you need me to patch some more to get more messages just tell me! -------------- next part -------------- A non-text attachment was scrubbed... Name: everything-with-cable.log.gz Type: application/x-gzip Size: 913088 bytes Desc: not available Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120107/e8a1e0bf/attachment-0001.bin -------------- next part -------------- > ^ permalink raw reply [flat|nested] 57+ messages in thread
[parent not found: <CAD2nsn1wS3gAPBHzaSaBo33hQxr2ePM2P8pnBqmznSw+=Jhtjg@mail.gmail.com>]
[parent not found: <415EAF67-9B48-4C48-BBF4-E4EF13A0DE84@lacto.se>]
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 [not found] ` <415EAF67-9B48-4C48-BBF4-E4EF13A0DE84@lacto.se> @ 2012-01-09 5:18 ` Mohammed Shafi 0 siblings, 0 replies; 57+ messages in thread From: Mohammed Shafi @ 2012-01-09 5:18 UTC (permalink / raw) To: ath9k-devel On Sat, Jan 7, 2012 at 9:40 PM, Kim Lidstr?m <dexter@lacto.se> wrote: > Keep me updated if it that is not a problem. This is interesting :) i got the answer from the developer. we need to type the kernel debug level messages(though i have n't tried) KERN_EMERG "<0>" /* system is unusable */ KERN_ALERT "<1>" /* action must be taken immediately */ KERN_CRIT "<2>" /* critical conditions */ KERN_ERR "<3>" /* error conditions */ KERN_WARNING "<4>" /* warning conditions */ KERN_NOTICE "<5>" /* normal but significant condition */ KERN_INFO "<6>" /* informational */ KERN_DEBUG "<7>" /* debug-level messages */ -- shafi ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2011-12-30 5:27 [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 Kim Lidström 2011-12-30 6:07 ` Mohammed Shafi 2012-01-02 21:46 ` Adrian Chadd @ 2012-01-12 20:02 ` Mihai Moldovan 2012-01-12 20:51 ` Adrian Chadd 2 siblings, 1 reply; 57+ messages in thread From: Mihai Moldovan @ 2012-01-12 20:02 UTC (permalink / raw) To: ath9k-devel Hi I guess I see the problem on 3.2 (and compat-wireless) with two Atheros cards - AR9380 and AR5416. Debugging is impossible without special hardware, too, because there is no panic/kernel output whatsoever. At some point, the box hangs itself completely. A soft reset won't work, I have to shut it down hard and start it up again. Also, I have noticed that the fan speed raises a little whenever this happens, but I guess that's just the BIOS protecting the hardware as the OS kernel stopped working. Best regards Mihai * On 30.12.2011 06:27 AM, Kim Lidstr?m wrote: > Hello! > I have an Acer Aspire 5250 with an "Acer Nplify 802.11b/g/n" wlan > adapter (Never heard of it > before.. But apparently it has a AR9485) that I'm having problems with. > I can connect to wlans but after a while the kernel hangs. I can't do > anything. I can't even produce a > kernel dump. > I even tried the latest version of comp-wireless (3.2-rc6-3) and it > was even worse! It crashed the system almost instantly. > > From what I understand this specific chipset is not really implemented > and/or experimental. Am I right? > Either way I would be more than happy to help with debugging this and > maybe get this chipset working > sometime soon! The only problem us that my expertise only stretches so > far. Even though I know C > I've never done any kernel or driver work. > So what can I do? I'll see if I can get my hands on one (or two) of > those usb-to-serial adapters and see what happens, but I live on a > very tight budget so I can't hope for too much. > > // Kim > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 4369 bytes Desc: S/MIME Cryptographic Signature Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120112/62fedacc/attachment.bin ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-12 20:02 ` Mihai Moldovan @ 2012-01-12 20:51 ` Adrian Chadd 2012-01-12 20:56 ` Mihai Moldovan 0 siblings, 1 reply; 57+ messages in thread From: Adrian Chadd @ 2012-01-12 20:51 UTC (permalink / raw) To: ath9k-devel Remember, kim though it was a hang until we enabled some ath9k debugging. We then discovered the driver was sitting in a very tight interrupt handling loop... adrian ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-12 20:51 ` Adrian Chadd @ 2012-01-12 20:56 ` Mihai Moldovan 2012-01-12 21:02 ` Mihai Moldovan 0 siblings, 1 reply; 57+ messages in thread From: Mihai Moldovan @ 2012-01-12 20:56 UTC (permalink / raw) To: ath9k-devel Hm, shouldn't the kernel actually detect something like this (i.e., detect when it's running in kernel mode for too long and not letting userspace processes run)? * On 12.01.2012 09:51 PM, Adrian Chadd wrote: > Remember, kim though it was a hang until we enabled some ath9k > debugging. We then discovered the driver was sitting in a very tight > interrupt handling loop... > > > > adrian -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 4369 bytes Desc: S/MIME Cryptographic Signature Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120112/28bf8bb3/attachment-0001.bin ^ permalink raw reply [flat|nested] 57+ messages in thread
* [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 2012-01-12 20:56 ` Mihai Moldovan @ 2012-01-12 21:02 ` Mihai Moldovan 0 siblings, 0 replies; 57+ messages in thread From: Mihai Moldovan @ 2012-01-12 21:02 UTC (permalink / raw) To: ath9k-devel At least I've seen messages like this when my kernel handled disk IO (and actually the filesystem was buggy) - it echo'd a warning message with a backtrace claiming that it has spend more than 120 seconds in kernel mode or something. * On 12.01.2012 09:56 PM, Mihai Moldovan wrote: > Hm, shouldn't the kernel actually detect something like this (i.e., > detect when it's running in kernel mode for too long and not letting > userspace processes run)? > > > * On 12.01.2012 09:51 PM, Adrian Chadd wrote: >> Remember, kim though it was a hang until we enabled some ath9k >> debugging. We then discovered the driver was sitting in a very tight >> interrupt handling loop... >> >> >> >> adrian > > > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 4369 bytes Desc: S/MIME Cryptographic Signature Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120112/76fe9312/attachment.bin ^ permalink raw reply [flat|nested] 57+ messages in thread
end of thread, other threads:[~2012-01-12 21:02 UTC | newest]
Thread overview: 57+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-12-30 5:27 [ath9k-devel] Kernel panic with AR9485 and kernel 3.1.6 Kim Lidström
2011-12-30 6:07 ` Mohammed Shafi
[not found] ` <CAFopJHe9t3BysVAG+ptimZkn7VuohY3c7iH15gq8K9v789ZTEQ@mail.gmail.com>
2011-12-30 7:17 ` Kim Lidström
2011-12-30 9:10 ` Mohammed Shafi
2011-12-30 10:08 ` Kim Lidström
2011-12-30 10:30 ` Mohammed Shafi
2011-12-30 10:41 ` Kim Lidström
2011-12-30 11:58 ` Paolo
2011-12-30 12:18 ` Kim Lidström
2011-12-31 15:58 ` Peter Stuge
2012-01-02 20:26 ` Kim Lidström
2012-01-02 21:45 ` Peter Stuge
2012-01-02 21:46 ` Adrian Chadd
2012-01-03 0:13 ` Kim Lidström
2012-01-03 1:01 ` Adrian Chadd
2012-01-03 1:22 ` Kim Lidström
2012-01-03 1:25 ` Adrian Chadd
2012-01-03 1:31 ` Kim Lidström
2012-01-03 2:52 ` Kim Lidström
2012-01-03 3:06 ` Adrian Chadd
2012-01-03 3:10 ` Kim Lidström
2012-01-03 3:56 ` Kim Lidström
2012-01-03 3:57 ` Adrian Chadd
2012-01-03 4:06 ` Kim Lidström
2012-01-03 10:55 ` Adrian Chadd
2012-01-03 20:50 ` Kim Lidström
2012-01-03 21:29 ` Kim Lidström
2012-01-04 12:02 ` Kim Lidström
2012-01-04 12:10 ` Kim Lidström
2012-01-05 1:29 ` Adrian Chadd
2012-01-05 14:50 ` Kim Lidström
2012-01-05 15:21 ` Kim Lidström
2012-01-05 17:15 ` Kim Lidström
2012-01-05 23:08 ` Adrian Chadd
2012-01-05 23:54 ` Peter Stuge
2012-01-06 1:02 ` Kim Lidström
2012-01-06 1:16 ` Peter Stuge
2012-01-06 1:23 ` Kim Lidström
2012-01-06 1:58 ` Peter Stuge
2012-01-06 2:54 ` Kim Lidström
2012-01-06 8:49 ` Adrian Chadd
2012-01-06 14:46 ` Kim Lidström
2012-01-06 18:37 ` Adrian Chadd
2012-01-06 19:10 ` Adrian Chadd
2012-01-06 20:33 ` Kim Lidström
2012-01-07 1:25 ` Kim Lidström
2012-01-09 5:27 ` Mohammed Shafi
2012-01-09 13:13 ` Mohammed Shafi
[not found] ` <9F2C1487-033C-4F31-958E-A27304B5F56F@lacto.se>
2012-01-10 12:12 ` Mohammed Shafi
[not found] ` <D2048E57-64A4-4E58-BED8-D64CFC5466EA@lacto.se>
2012-01-12 8:29 ` Mohammed Shafi
[not found] ` <CAD2nsn0=mj2nGvKuimNLo7sVLVMprhENud8vF=+oB_ApVooP0A@mail.gmail.com>
[not found] ` <CAFopJHe0br-PL_f=XwVvmLZWNvY66u+dY9eeDKeXieaG8GH6pQ@mail.gmail.com>
[not found] ` <CAD2nsn12MJ2EiS3bYR35Q=Q-nyYOZQepDe9eEfn5BTP7sJBgdQ@mail.gmail.com>
[not found] ` <17C01D34-E12D-4E2F-8FED-A24C175077A2@lacto.se>
[not found] ` <CAD2nsn35no_3bMgF__Ra7WjMwHyY-donA-KuCw06QjBbfpSkmQ@mail.gmail.com>
2012-01-07 15:29 ` Mohammed Shafi
[not found] ` <BF537ED3-9C83-42C9-BCAD-F1D418E56A48@lacto.se>
2012-01-07 15:45 ` Kim Lidström
[not found] ` <CAD2nsn1wS3gAPBHzaSaBo33hQxr2ePM2P8pnBqmznSw+=Jhtjg@mail.gmail.com>
[not found] ` <415EAF67-9B48-4C48-BBF4-E4EF13A0DE84@lacto.se>
2012-01-09 5:18 ` Mohammed Shafi
2012-01-12 20:02 ` Mihai Moldovan
2012-01-12 20:51 ` Adrian Chadd
2012-01-12 20:56 ` Mihai Moldovan
2012-01-12 21:02 ` Mihai Moldovan
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.