Re: [Xenomai-core] porting xenomai on imx25

[Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>]

On 04/18/2012 12:28 PM, Roberto Bielli wrote:
> Hi Gilles,
> 
> i try to give only another accurate information.
> 
> i made another test:
> i write a xenomai driver for reading the timer and avic register and i 
> see a strange behaviour.
> when there is the problem the interrupt is NOT masqueraded in avic but 
> the timer has the interrupt not acked.

Ah, that is good news, at least now we have a clue. Note that it could
also mean that the timer has ticked, but the irq is not generated for
another reason. I think you should dump all the timer registers, and see
if anything is wrong by decoding their values with the datasheet.

A quick test also, assuming that the write to the MX3_TSTAT regiter in
gpt_irq_acknowledge may be posted, try rereading the register after
writing it.

> 
> After this i understand that now are my problems.
> Do you know somebody that can help me understanding the problem only for 
> xenomai side?

If you need someone's help, you need to give access to your board to
that person or company. Because indirect debugging is really
inefficient: look at how many mails I had to send you over how much time
to get you to do what anybody with xenomai experience would have done in
just a few hours.

-- 
                                                                Gilles.