Re: [PATCH 3/7] drivers/usb/gadget/pch_udc.c: adjust suspicious bit operation

[Sergei Shtylyov <sshtylyov@mvista.com>]

Hello.

On 07-06-2012 1:41, Julia Lawall wrote:

> From: Julia Lawall <Julia.Lawall@lip6.fr>

> PCH_UDC_DMA_LAST is 0x08000000 so a bit-or with this value always gives a
> nonzero result.  The test is rewritten as done elsewhere in the same file.

> This problem was found using Coccinelle (http://coccinelle.lip6.fr/).

> Signed-off-by: Julia Lawall<julia@diku.dk>

> ---
>   drivers/usb/gadget/pch_udc.c |    3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
> index 1cfcc9e..79f7a53 100644
> --- a/drivers/usb/gadget/pch_udc.c
> +++ b/drivers/usb/gadget/pch_udc.c
> @@ -2208,7 +2208,8 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep)
>   			return;
>   		}
>   		if ((td->status&  PCH_UDC_BUFF_STS) = PCH_UDC_BS_DMA_DONE)
> -			if (td->status | PCH_UDC_DMA_LAST) {
> +			if ((td_data->status&  PCH_UDC_DMA_LAST)
> +			    = PCH_UDC_DMA_LAST) {

    But why not simply:

			if (td_data->status & PCH_UDC_DMA_LAST)

if the constant is single bit anyway? And are you sure about s/td/td_data/?

WBR, Sergei