All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there
@ 2012-04-26 22:46 Tom Rini
  2012-04-26 22:46 ` [U-Boot] [PATCH v2 2/2] hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c Tom Rini
                   ` (5 more replies)
  0 siblings, 6 replies; 25+ messages in thread
From: Tom Rini @ 2012-04-26 22:46 UTC (permalink / raw)
  To: u-boot

We provide a default table of { 9600, 19200, 38400, 57600, 115200 }
in <config_fallbacks.h> which mkconfig places after <configs/...h> in
the generated config file.  This is used when a board has not set its
own table.  A number of boards set values below 9600 but it is my belief
that this was done for completeness rather than as a requirement so they
have opted to the new default table.

Signed-off-by: Tom Rini <trini@ti.com>

---
Changes in v2:
- Create, use <config_fallbacks.h> rather than mkconfig directly for
  this table (per Mike Frysinger).
---
 include/config_cmd_defaults.h              |    1 -
 include/config_fallbacks.h                 |   16 ++++++++++++++++
 include/configs/AP1000.h                   |    1 -
 include/configs/APC405.h                   |    1 -
 include/configs/AR405.h                    |    1 -
 include/configs/ASH405.h                   |    1 -
 include/configs/Alaska8220.h               |    1 -
 include/configs/BC3450.h                   |    1 -
 include/configs/CANBT.h                    |    1 -
 include/configs/CATcenter.h                |    1 -
 include/configs/CMS700.h                   |    1 -
 include/configs/CPCI2DP.h                  |    1 -
 include/configs/CPCI405.h                  |    1 -
 include/configs/CPCI4052.h                 |    1 -
 include/configs/CPCI405AB.h                |    1 -
 include/configs/CPCI405DT.h                |    1 -
 include/configs/CPCI750.h                  |    1 -
 include/configs/CPCIISER4.h                |    1 -
 include/configs/CRAYL1.h                   |    1 -
 include/configs/DB64360.h                  |    1 -
 include/configs/DB64460.h                  |    1 -
 include/configs/DP405.h                    |    1 -
 include/configs/DU405.h                    |    1 -
 include/configs/EVB64260.h                 |    1 -
 include/configs/EXBITGEN.h                 |    1 -
 include/configs/G2000.h                    |    1 -
 include/configs/HH405.h                    |    1 -
 include/configs/HUB405.h                   |    1 -
 include/configs/IceCube.h                  |    1 -
 include/configs/JSE.h                      |    1 -
 include/configs/MIP405.h                   |    1 -
 include/configs/ML2.h                      |    1 -
 include/configs/MPC8260ADS.h               |    1 -
 include/configs/MPC8266ADS.h               |    1 -
 include/configs/MVBC_P.h                   |    1 -
 include/configs/MVSMR.h                    |    1 -
 include/configs/MigoR.h                    |    1 -
 include/configs/OCRTC.h                    |    1 -
 include/configs/ORSG.h                     |    1 -
 include/configs/P3G4.h                     |    1 -
 include/configs/PATI.h                     |    1 -
 include/configs/PCI405.h                   |    1 -
 include/configs/PCI5441.h                  |    1 -
 include/configs/PIP405.h                   |    1 -
 include/configs/PK1C20.h                   |    1 -
 include/configs/PLU405.h                   |    1 -
 include/configs/PM520.h                    |    1 -
 include/configs/PPChameleonEVB.h           |    1 -
 include/configs/Rattler.h                  |    1 -
 include/configs/TB5200.h                   |    1 -
 include/configs/TOP5200.h                  |    1 -
 include/configs/TOP860.h                   |    1 -
 include/configs/TQM5200.h                  |    1 -
 include/configs/Total5200.h                |    1 -
 include/configs/VOH405.h                   |    1 -
 include/configs/VOM405.h                   |    1 -
 include/configs/W7OLMC.h                   |    1 -
 include/configs/W7OLMG.h                   |    1 -
 include/configs/WUH405.h                   |    1 -
 include/configs/Yukon8220.h                |    1 -
 include/configs/ZPC1900.h                  |    1 -
 include/configs/ZUMA.h                     |    1 -
 include/configs/a4m072.h                   |    1 -
 include/configs/actux1.h                   |    1 -
 include/configs/actux2.h                   |    1 -
 include/configs/actux3.h                   |    1 -
 include/configs/actux4.h                   |    1 -
 include/configs/aev.h                      |    1 -
 include/configs/amcc-common.h              |    1 -
 include/configs/ap325rxa.h                 |    1 -
 include/configs/canmb.h                    |    1 -
 include/configs/cm5200.h                   |    1 -
 include/configs/cmi_mpc5xx.h               |    1 -
 include/configs/cogent_mpc8260.h           |    1 -
 include/configs/cogent_mpc8xx.h            |    1 -
 include/configs/cpci5200.h                 |    1 -
 include/configs/csb272.h                   |    1 -
 include/configs/csb472.h                   |    1 -
 include/configs/digsy_mtc.h                |    1 -
 include/configs/dvlhost.h                  |    1 -
 include/configs/ecovec.h                   |    1 -
 include/configs/edminiv2.h                 |    1 -
 include/configs/ep8248.h                   |    1 -
 include/configs/ep82xxm.h                  |    1 -
 include/configs/espt.h                     |    1 -
 include/configs/galaxy5200.h               |    1 -
 include/configs/gr_cpci_ax2000.h           |    1 -
 include/configs/gr_ep2s60.h                |    1 -
 include/configs/gr_xc3s_1500.h             |    1 -
 include/configs/grsim.h                    |    1 -
 include/configs/grsim_leon2.h              |    1 -
 include/configs/gth2.h                     |    1 -
 include/configs/hmi1001.h                  |    1 -
 include/configs/hymod.h                    |    1 -
 include/configs/inka4x0.h                  |    1 -
 include/configs/ipek01.h                   |    1 -
 include/configs/jupiter.h                  |    1 -
 include/configs/km/keymile-common.h        |    1 -
 include/configs/lwmon.h                    |    1 -
 include/configs/manroland/mpc5200-common.h |    1 -
 include/configs/mcc200.h                   |    1 -
 include/configs/mecp5200.h                 |    1 -
 include/configs/microblaze-generic.h       |    1 -
 include/configs/motionpro.h                |    1 -
 include/configs/mpr2.h                     |    1 -
 include/configs/ms7720se.h                 |    1 -
 include/configs/ms7722se.h                 |    1 -
 include/configs/muas3001.h                 |    1 -
 include/configs/munices.h                  |    1 -
 include/configs/mv-common.h                |    1 -
 include/configs/nios2-generic.h            |    1 -
 include/configs/o2dnt.h                    |    1 -
 include/configs/omap3_zoom2.h              |    1 -
 include/configs/openrisc-generic.h         |    1 -
 include/configs/p3mx.h                     |    1 -
 include/configs/p3p440.h                   |    1 -
 include/configs/pcm030.h                   |    1 -
 include/configs/pf5200.h                   |    1 -
 include/configs/quad100hd.h                |    1 -
 include/configs/rsk7203.h                  |    1 -
 include/configs/rsk7264.h                  |    1 -
 include/configs/sbc405.h                   |    1 -
 include/configs/sc3.h                      |    1 -
 include/configs/sh7757lcr.h                |    1 -
 include/configs/sh7763rdp.h                |    1 -
 include/configs/sh7785lcr.h                |    1 -
 include/configs/sorcery.h                  |    1 -
 include/configs/spieval.h                  |    1 -
 include/configs/v38b.h                     |    1 -
 include/configs/xilinx-ppc.h               |    2 --
 include/configs/xpedite1000.h              |    1 -
 include/configs/zeus.h                     |    1 -
 mkconfig                                   |    1 +
 133 files changed, 17 insertions(+), 132 deletions(-)
 create mode 100644 include/config_fallbacks.h

diff --git a/include/config_cmd_defaults.h b/include/config_cmd_defaults.h
index e11205d..a55b268 100644
--- a/include/config_cmd_defaults.h
+++ b/include/config_cmd_defaults.h
@@ -14,6 +14,5 @@
 #define CONFIG_CMD_EXPORTENV 1
 #define CONFIG_CMD_GO 1
 #define CONFIG_CMD_IMPORTENV 1
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #endif
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
new file mode 100644
index 0000000..430890c
--- /dev/null
+++ b/include/config_fallbacks.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright 2012 Texas Instruments
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License Version 2. This file is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __CONFIG_FALLBACKS_H
+#define __CONFIG_FALLBACKS_H
+
+#ifndef CONFIG_SYS_BAUDRATE_TABLE
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#endif
+
+#endif	/* __CONFIG_FALLBACKS_H */
diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h
index b598371..fd074fb 100644
--- a/include/configs/AP1000.h
+++ b/include/configs/AP1000.h
@@ -142,7 +142,6 @@
 #define CONFIG_SYS_INIT_CHAN2		0
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 88fba5c..9a65cbc 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -186,7 +186,6 @@
 #define CONFIG_SYS_EXT_SERIAL_CLOCK    14745600 /* use external serial clock   */
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE      \
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/AR405.h b/include/configs/AR405.h
index 50796af..9994476 100644
--- a/include/configs/AR405.h
+++ b/include/configs/AR405.h
@@ -137,7 +137,6 @@
 #define CONFIG_SYS_EXT_SERIAL_CLOCK	14745600 /* use external serial clock	*/
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 0f79f1e..7f48499 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -135,7 +135,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index 015027d..39c29ec 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -62,7 +62,6 @@
 
 #define CONFIG_BAUDRATE		115200	    /* ... at 115200 bps */
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_TIMESTAMP			/* Print image info with timestamp */
diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 73925cd..8a73a9a 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -75,7 +75,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1		*/
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps		*/
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h
index 70b2215..be9238e 100644
--- a/include/configs/CANBT.h
+++ b/include/configs/CANBT.h
@@ -111,7 +111,6 @@
 #define CONFIG_SYS_EXT_SERIAL_CLOCK	14745600 /* use external serial clock	*/
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 4d6d56a..84e4e78 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -194,7 +194,6 @@
 #define CONFIG_SYS_BASE_BAUD		691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index e73be59..63d838f 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -133,7 +133,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index 20e5113..afe8d6e 100644
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -123,7 +123,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index a024e2b..cf1d1b3 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -136,7 +136,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index 21b5d6f..d17458e 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -145,7 +145,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 856583c..a0d16d2 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -144,7 +144,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index 4a7363f..98b8ef5 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -146,7 +146,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index 3768934..a6af86c 100644
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -239,7 +239,6 @@
 #define CONFIG_SYS_HZ			1000		/* decr freq: 1ms ticks */
 #define CONFIG_SYS_BUS_CLK		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_TCLK		133000000
diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h
index 35c1801..35daed0 100644
--- a/include/configs/CPCIISER4.h
+++ b/include/configs/CPCIISER4.h
@@ -120,7 +120,6 @@
 #define CONFIG_SYS_EXT_SERIAL_CLOCK	1843200	 /* use external serial clock	*/
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 8fde1a3..4aaceb7 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -140,7 +140,6 @@
  * drives the system clock.
  */
 #define CONFIG_SYS_BASE_BAUD       403225
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h
index 96b2ecf..c3f3a24 100644
--- a/include/configs/DB64360.h
+++ b/include/configs/DB64360.h
@@ -328,7 +328,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 #define CONFIG_SYS_TCLK		133000000
 
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_750FX_HID0		0x8000c084
diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h
index 0d77fcf..d48f092 100644
--- a/include/configs/DB64460.h
+++ b/include/configs/DB64460.h
@@ -266,7 +266,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 #define CONFIG_SYS_TCLK		133000000
 
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_750FX_HID0		0x8000c084
diff --git a/include/configs/DP405.h b/include/configs/DP405.h
index 7432de1..f6e2652 100644
--- a/include/configs/DP405.h
+++ b/include/configs/DP405.h
@@ -110,7 +110,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index 69868c6..24df85a 100644
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -124,7 +124,6 @@
 #define CONFIG_SYS_EXT_SERIAL_CLOCK	11059200  /* use external serial clock	*/
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h
index 3aec672..b905402 100644
--- a/include/configs/EVB64260.h
+++ b/include/configs/EVB64260.h
@@ -145,7 +145,6 @@
 #define	CONFIG_SYS_HZ			1000		/* decr freq: 1ms ticks	*/
 #define CONFIG_SYS_BUS_CLK		100000000	/* 100 MHz		*/
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #ifdef CONFIG_EVB64260_750CX
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index 2eeae6c..43c8842 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -125,7 +125,6 @@
 #define CONFIG_BAUDRATE		115200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE      \
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index 88c368d..d64dd8d 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -162,7 +162,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 7cea807..4a41b5c 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -187,7 +187,6 @@
 #define CONFIG_SYS_BASE_BAUD       691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE      \
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index d22434a..afb8273 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -129,7 +129,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 93c36cc..135ef55 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -53,7 +53,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index 46c2e07..ef652b2 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -205,7 +205,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index f3f9d89..9961fb5 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -189,7 +189,6 @@
 #define CONFIG_SYS_BASE_BAUD       916667
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/ML2.h b/include/configs/ML2.h
index 64cacff..4df9f4c 100644
--- a/include/configs/ML2.h
+++ b/include/configs/ML2.h
@@ -149,7 +149,6 @@
 #define CONFIG_SYS_INIT_CHAN2	 1
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index fd6d8c4..e4ea178 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -305,7 +305,6 @@
 
 #define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_FLASH_BASE		0xff800000
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 767fa33..0474140 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -246,7 +246,6 @@
 
 #define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_FLASH_BASE		0xFE000000
diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h
index a63c575..ade4893 100644
--- a/include/configs/MVBC_P.h
+++ b/include/configs/MVBC_P.h
@@ -47,7 +47,6 @@
 
 #define CONFIG_PSC_CONSOLE	1
 #define CONFIG_BAUDRATE		115200
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200, 230400}
 
 #define CONFIG_PCI		1
diff --git a/include/configs/MVSMR.h b/include/configs/MVSMR.h
index 9457bd3..f94ad5c 100644
--- a/include/configs/MVSMR.h
+++ b/include/configs/MVSMR.h
@@ -48,7 +48,6 @@
 
 #define CONFIG_PSC_CONSOLE	1
 #define CONFIG_BAUDRATE		115200
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200,\
 						230400}
 
diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h
index 53af631..619a800 100644
--- a/include/configs/MigoR.h
+++ b/include/configs/MigoR.h
@@ -65,7 +65,6 @@
 #define CONFIG_SYS_PBSIZE		256		/* Buffer size for Console output */
 #define CONFIG_SYS_MAXARGS		16		/* max args accepted for monitor commands */
 #define CONFIG_SYS_BARGSIZE	512		/* Buffer size for Boot Arguments passed to kernel */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate settings for this board */
 
 /* SCIF */
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index f761450..47110af 100644
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -116,7 +116,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
index ab9b89a..9f754c2 100644
--- a/include/configs/ORSG.h
+++ b/include/configs/ORSG.h
@@ -114,7 +114,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h
index 28baadd..f7ef643 100644
--- a/include/configs/P3G4.h
+++ b/include/configs/P3G4.h
@@ -171,7 +171,6 @@
 #define	CONFIG_SYS_HZ			1000		/* decr freq: 1ms ticks	*/
 #define CONFIG_SYS_BUS_CLK		133000000	/* 133 MHz		*/
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
diff --git a/include/configs/PATI.h b/include/configs/PATI.h
index d43b401..bf39d00 100644
--- a/include/configs/PATI.h
+++ b/include/configs/PATI.h
@@ -111,7 +111,6 @@
 
 #define	CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 1250000 }
 
 
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index 0f1b264..6be5c25 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -122,7 +122,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h
index 33ffb36..ae5bc2e 100644
--- a/include/configs/PCI5441.h
+++ b/include/configs/PCI5441.h
@@ -100,7 +100,6 @@
 
 #define CONFIG_SYS_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
 #define CONFIG_BAUDRATE		115200		/* Initial baudrate	*/
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
 
 #define CONFIG_SYS_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 9a93396..242aa31 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -182,7 +182,6 @@
 #define CONFIG_SYS_BASE_BAUD       691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h
index f668d1d..3fe2b3e 100644
--- a/include/configs/PK1C20.h
+++ b/include/configs/PK1C20.h
@@ -102,7 +102,6 @@
 
 #define CONFIG_SYS_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
 #define CONFIG_BAUDRATE		115200		/* Initial baudrate	*/
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
 
 #define CONFIG_SYS_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 1692ed1..1cce57e 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -146,7 +146,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index 7addabb..9b01e4f 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -46,7 +46,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		9600	/* ... at 9600 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 5fa5ac5..2d45618 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -203,7 +203,6 @@
 #define CONFIG_SYS_BASE_BAUD		691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
index 4cedf07..9ddf626 100644
--- a/include/configs/Rattler.h
+++ b/include/configs/Rattler.h
@@ -189,7 +189,6 @@
 
 #define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_FLASH_BASE		0xFE000000
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 96b562c..feaadf3 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -59,7 +59,6 @@
 #define CONFIG_SERIAL_MULTI	1	/* support multiple consoles */
 #define CONFIG_PSC_CONSOLE2	6	/* second console is on PSC6 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index e2e392c..2267d59 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -62,7 +62,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		9600	/* ... at 9600 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index 7136233..3a01292 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -198,7 +198,6 @@
 #define	I2C_TRISTATE	{ __I2C_DIR &= ~SDA; }
 #endif
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index f7f3736..6ea3faa 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -63,7 +63,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1			*/
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps			*/
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 #define CONFIG_BOOTCOUNT_LIMIT	1
 
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index a1d51e9..16b2dac 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -63,7 +63,6 @@
  */
 #define CONFIG_PSC_CONSOLE	3	/* console is on PSC3 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index 621ea3f..5b8f41f 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -144,7 +144,6 @@
 #define CONFIG_SYS_BASE_BAUD       691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index 36840cc..2ca4ed0 100644
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -131,7 +131,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index 58cd064..1d97d3e 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -138,7 +138,6 @@
 
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{9600}
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address		*/
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 4676ce7..93caacc 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -146,7 +146,6 @@
 
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{9600}
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address		*/
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index eeb4088..504ad96 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -133,7 +133,6 @@
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
index 3baa02c..5f925b3 100644
--- a/include/configs/Yukon8220.h
+++ b/include/configs/Yukon8220.h
@@ -62,7 +62,6 @@
 
 #define CONFIG_BAUDRATE		115200	    /* ... at 115200 bps */
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_TIMESTAMP			/* Print image info with timestamp */
diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h
index 924b694..4cda22f 100644
--- a/include/configs/ZPC1900.h
+++ b/include/configs/ZPC1900.h
@@ -173,7 +173,6 @@
 
 #define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h
index 72995bc..5350f61 100644
--- a/include/configs/ZUMA.h
+++ b/include/configs/ZUMA.h
@@ -167,7 +167,6 @@
 
 #define CONFIG_SYS_BUS_CLK		133000000	/* 133 MHz		*/
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h
index ef38102..1c13904 100644
--- a/include/configs/a4m072.h
+++ b/include/configs/a4m072.h
@@ -50,7 +50,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		9600	/* ... at 9600 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 /* define to enable silent console */
 #define CONFIG_SILENT_CONSOLE
diff --git a/include/configs/actux1.h b/include/configs/actux1.h
index a52e4da..bdd2239 100644
--- a/include/configs/actux1.h
+++ b/include/configs/actux1.h
@@ -101,7 +101,6 @@
 #define CONFIG_SYS_LOAD_ADDR			0x00010000
 
 /* valid baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600,	\
 					  115200, 230400 }
 #define CONFIG_SERIAL_RTS_ACTIVE	1
diff --git a/include/configs/actux2.h b/include/configs/actux2.h
index f72a942..c55571c 100644
--- a/include/configs/actux2.h
+++ b/include/configs/actux2.h
@@ -94,7 +94,6 @@
 #define CONFIG_SYS_LOAD_ADDR			0x00010000
 
 /* valid baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
 					  115200, 230400 }
 #define CONFIG_SERIAL_RTS_ACTIVE	1
diff --git a/include/configs/actux3.h b/include/configs/actux3.h
index 586642d..78ee2b5 100644
--- a/include/configs/actux3.h
+++ b/include/configs/actux3.h
@@ -92,7 +92,6 @@
 #define CONFIG_SYS_LOAD_ADDR			0x00010000
 
 /* valid baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
 					  115200, 230400 }
 #define CONFIG_SERIAL_RTS_ACTIVE	1
diff --git a/include/configs/actux4.h b/include/configs/actux4.h
index 67362e5..c1105df 100644
--- a/include/configs/actux4.h
+++ b/include/configs/actux4.h
@@ -99,7 +99,6 @@
 #define CONFIG_SYS_LOAD_ADDR			0x00010000
 
 /* valid baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
 					  115200, 230400 }
 #define CONFIG_SERIAL_RTS_ACTIVE	1
diff --git a/include/configs/aev.h b/include/configs/aev.h
index 5678773..8d0890f 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -59,7 +59,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index a9e1be8..76ef56f 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -37,7 +37,6 @@
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 #define CONFIG_BAUDRATE		115200
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h
index 95774e0..42a134b 100644
--- a/include/configs/ap325rxa.h
+++ b/include/configs/ap325rxa.h
@@ -77,7 +77,6 @@
 /* Buffer size for Boot Arguments passed to kernel */
 #define CONFIG_SYS_BARGSIZE	512
 /* List of legal baudrate settings for this board */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 38400 }
 
 /* SCIF */
diff --git a/include/configs/canmb.h b/include/configs/canmb.h
index e473e7a..d4c5bbd 100644
--- a/include/configs/canmb.h
+++ b/include/configs/canmb.h
@@ -51,7 +51,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
index e1b3830..0abe090 100644
--- a/include/configs/cm5200.h
+++ b/include/configs/cm5200.h
@@ -60,7 +60,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		57600	/* ... at 57600 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 #define CONFIG_SILENT_CONSOLE	1	/* needed to silence i2c_init() */
 
diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h
index f312cad..329e4e3 100644
--- a/include/configs/cmi_mpc5xx.h
+++ b/include/configs/cmi_mpc5xx.h
@@ -114,7 +114,6 @@
 
 #define	CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 1250000 }
 
 
diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h
index c800753..2997f52 100644
--- a/include/configs/cogent_mpc8260.h
+++ b/include/configs/cogent_mpc8260.h
@@ -157,7 +157,6 @@
 
 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h
index 10c91e3..58aa88b 100644
--- a/include/configs/cogent_mpc8xx.h
+++ b/include/configs/cogent_mpc8xx.h
@@ -122,7 +122,6 @@
 
 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_ALLOC_DPRAM
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index a31bf42..a9cfe26 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -58,7 +58,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		9600	/* ... at 115200 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index f0b8494..fb5f868 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -171,7 +171,6 @@
 #define CONFIG_SYS_EXT_SERIAL_CLOCK	3868400	/* use external serial clock */
 #undef  CONFIG_SYS_BASE_BAUD
 #define CONFIG_BAUDRATE		38400	/* Default baud rate */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE      \
     { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 }
 
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index cf54fcb..5d18ac7 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -170,7 +170,6 @@
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK		/* use internal serial clock */
 #define CONFIG_SYS_BASE_BAUD		691200
 #define CONFIG_BAUDRATE		38400	/* Default baud rate */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE      \
     { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 }
 
diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h
index 400454f..d517334 100644
--- a/include/configs/digsy_mtc.h
+++ b/include/configs/digsy_mtc.h
@@ -59,7 +59,6 @@
  */
 #define CONFIG_PSC_CONSOLE	4	/* console is on PSC4  */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200  bps  */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h
index 89c59b7..4eda91e 100644
--- a/include/configs/dvlhost.h
+++ b/include/configs/dvlhost.h
@@ -100,7 +100,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x00010000
 
 /* valid baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
 					  115200, 230400 }
 #define CONFIG_SERIAL_RTS_ACTIVE	1
diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h
index 6f20827..4d09132 100644
--- a/include/configs/ecovec.h
+++ b/include/configs/ecovec.h
@@ -117,7 +117,6 @@
 /* Buffer size for Boot Arguments passed to kernel */
 #define CONFIG_SYS_BARGSIZE	512
 /* List of legal baudrate settings for this board */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
 
 /* SCIF */
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index 9e9b25b..9b7cc66 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -95,7 +95,6 @@
 
 #define CONFIG_CONS_INDEX	1	/*Console on UART0 */
 #define CONFIG_BAUDRATE			115200
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE \
 	{ 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 }
 
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index a88e910..2b40f59 100644
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -173,7 +173,6 @@
 
 #define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_FLASH_BASE		0xFF800000
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index fa44708..04c0708 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -184,7 +184,6 @@
 
 #define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/espt.h b/include/configs/espt.h
index 8ce297d..3df1fae 100644
--- a/include/configs/espt.h
+++ b/include/configs/espt.h
@@ -65,7 +65,6 @@
 #define CONFIG_SYS_MAXARGS		16	/* max args accepted for monitor commands */
 #define CONFIG_SYS_BARGSIZE	512	/* Buffer size for Boot Arguments
 								passed to kernel */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate
 												settings for this board */
 
diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h
index 9249533..a38298f 100644
--- a/include/configs/galaxy5200.h
+++ b/include/configs/galaxy5200.h
@@ -65,7 +65,6 @@
 					/* register later on to  */
 					/* enable UART function! */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h
index d37b39f..dd6c41d 100644
--- a/include/configs/gr_cpci_ax2000.h
+++ b/include/configs/gr_cpci_ax2000.h
@@ -67,7 +67,6 @@
  * Serial console configuration
  */
 #define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h
index 85f1b03..7068ff8 100644
--- a/include/configs/gr_ep2s60.h
+++ b/include/configs/gr_ep2s60.h
@@ -61,7 +61,6 @@
  * Serial console configuration
  */
 #define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h
index 8b8a3fb..5006322 100644
--- a/include/configs/gr_xc3s_1500.h
+++ b/include/configs/gr_xc3s_1500.h
@@ -48,7 +48,6 @@
  * Serial console configuration
  */
 #define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
diff --git a/include/configs/grsim.h b/include/configs/grsim.h
index 6bdd35d..f3639dd 100644
--- a/include/configs/grsim.h
+++ b/include/configs/grsim.h
@@ -55,7 +55,6 @@
  * Serial console configuration
  */
 #define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h
index 6d5044c..fb9a3f9 100644
--- a/include/configs/grsim_leon2.h
+++ b/include/configs/grsim_leon2.h
@@ -54,7 +54,6 @@
  * Serial console configuration
  */
 #define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
diff --git a/include/configs/gth2.h b/include/configs/gth2.h
index 077079c..76e911a 100644
--- a/include/configs/gth2.h
+++ b/include/configs/gth2.h
@@ -49,7 +49,6 @@
 #define CONFIG_BAUDRATE		115200
 
 /* valid baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
 
 /* Only interrupt boot if space is pressed */
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index 2e680e5..354072a 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -48,7 +48,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps	*/
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 1e80ec0..8c9f3d1 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -289,7 +289,6 @@
 
 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define	CONFIG_SYS_I2C_SPEED		50000
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index c62cf67..2b0b616 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -57,7 +57,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps	*/
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index db5c7e1..cfa4d8c 100644
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -53,7 +53,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		115200	/* ... at 9600 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history */
diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
index e338b66..f5adccb 100644
--- a/include/configs/jupiter.h
+++ b/include/configs/jupiter.h
@@ -54,7 +54,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index f6208ca..7a01705 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -78,7 +78,6 @@
 #define CONFIG_SYS_HZ			1000	/* decr. freq: 1 ms ticks */
 
 #define CONFIG_BAUDRATE			115200
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_LOADS_ECHO
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index e308448..405bc69 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -242,7 +242,6 @@
  * When the watchdog is enabled, output must be fast enough in Linux.
  */
 #ifdef CONFIG_WATCHDOG
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{		38400, 57600, 115200 }
 #endif
 
diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h
index 2addd34..3e4131e 100644
--- a/include/configs/manroland/mpc5200-common.h
+++ b/include/configs/manroland/mpc5200-common.h
@@ -39,7 +39,6 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200,\
 					 230400 }
 
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index c67dfaa..b56b273 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -88,7 +88,6 @@
 #error "Select only one console device!"
 #endif
 #define CONFIG_BAUDRATE		115200
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_MII		1
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 9652a6e..22e95b3 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -62,7 +62,6 @@
 #else
 #define CONFIG_BAUDRATE		9600	/* ... at 115200 bps */
 #endif
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_MII
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 25a815c..efca136 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -36,7 +36,6 @@
 # define CONFIG_XILINX_UARTLITE
 # define CONFIG_SERIAL_BASE	XILINX_UARTLITE_BASEADDR
 # define CONFIG_BAUDRATE	XILINX_UARTLITE_BAUDRATE
-# undef CONFIG_SYS_BAUDRATE_TABLE
 # define CONFIG_SYS_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
 # define CONSOLE_ARG	"console=console=ttyUL0,115200\0"
 #elif XILINX_UART16550_BASEADDR
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index fdeebc8..bdcae59 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -75,7 +75,6 @@
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_NETCONSOLE	1	/* network console */
 #define CONFIG_BAUDRATE		115200
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h
index 3d7c820..0f7edff 100644
--- a/include/configs/mpr2.h
+++ b/include/configs/mpr2.h
@@ -52,7 +52,6 @@
 #define CONFIG_SYS_PBSIZE		256	/* Buffer size for Console output */
 #define CONFIG_SYS_MAXARGS		16	/* max args accepted for monitor commands */
 #define CONFIG_SYS_BARGSIZE		512	/* Buffer size for Boot Arguments passed to kernel */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate settings for this board */
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h
index de77aa2..afa82cf 100644
--- a/include/configs/ms7720se.h
+++ b/include/configs/ms7720se.h
@@ -61,7 +61,6 @@
 /* Buffer size for Boot Arguments passed to kernel */
 #define CONFIG_SYS_BARGSIZE	512
 /* List of legal baudrate settings for this board */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
 
 /* SCIF */
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
index f5d6731..7cf641f 100644
--- a/include/configs/ms7722se.h
+++ b/include/configs/ms7722se.h
@@ -63,7 +63,6 @@
 #define CONFIG_SYS_PBSIZE		256		/* Buffer size for Console output */
 #define CONFIG_SYS_MAXARGS		16		/* max args accepted for monitor commands */
 #define CONFIG_SYS_BARGSIZE		512		/* Buffer size for Boot Arguments passed to kernel */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate settings for this board */
 
 /* SCIF */
diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h
index 0e14dce..18bd37e 100644
--- a/include/configs/muas3001.h
+++ b/include/configs/muas3001.h
@@ -215,7 +215,6 @@
 
 #define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
diff --git a/include/configs/munices.h b/include/configs/munices.h
index a0296d8..425a1d8 100644
--- a/include/configs/munices.h
+++ b/include/configs/munices.h
@@ -61,7 +61,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index 229ba5d..1a63791 100644
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -70,7 +70,6 @@
 
 #define CONFIG_CONS_INDEX	1	/*Console on UART0 */
 #define CONFIG_BAUDRATE			115200
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
 					  115200,230400, 460800, 921600 }
 /* auto boot */
diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h
index 6863576..17017a5 100644
--- a/include/configs/nios2-generic.h
+++ b/include/configs/nios2-generic.h
@@ -46,7 +46,6 @@
 #define CONFIG_ALTERA_JTAG_UART_BYPASS
 #define CONFIG_SYS_NIOS_FIXEDBAUD
 #define CONFIG_BAUDRATE		CONFIG_SYS_UART_BAUD
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{CONFIG_BAUDRATE}
 #define CONFIG_SYS_CONSOLE_INFO_QUIET	/* Suppress console info */
 
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index cce2b63..22eb004 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -43,7 +43,6 @@
  */
 #define CONFIG_PSC_CONSOLE	5	/* console is on PSC5 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index 3a2d849..b60ece3 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -89,7 +89,6 @@
 #define CONFIG_SYS_NS16550_REG_SIZE	(-2)
 #define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
 #define CONFIG_BAUDRATE			115200
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{115200}
 
 /* allow to overwrite serial and ethaddr */
diff --git a/include/configs/openrisc-generic.h b/include/configs/openrisc-generic.h
index ac4e5fc..5ff410d 100644
--- a/include/configs/openrisc-generic.h
+++ b/include/configs/openrisc-generic.h
@@ -55,7 +55,6 @@
 # define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_CLK_FREQ
 
 #define CONFIG_BAUDRATE			CONFIG_SYS_UART_BAUD
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{CONFIG_BAUDRATE}
 #define CONFIG_SYS_CONSOLE_INFO_QUIET	/* Suppress console info */
 #define CONSOLE_ARG			"console=console=ttyS0,115200\0"
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
index c70cc6b..e44009e 100644
--- a/include/configs/p3mx.h
+++ b/include/configs/p3mx.h
@@ -108,7 +108,6 @@
 #define CONFIG_MPSC			/* MV64460 Serial		*/
 #define CONFIG_MPSC_PORT	0
 #define CONFIG_BAUDRATE		115200	/* console baudrate		*/
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index ff1468b..d7b1ca2 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -90,7 +90,6 @@
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK
 #define CONFIG_BAUDRATE		115200
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE						\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,		\
 			57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h
index 0685837..1c4d722 100644
--- a/include/configs/pcm030.h
+++ b/include/configs/pcm030.h
@@ -62,7 +62,6 @@ Serial console configuration
 					/* register later on to */
 					/*enable UART function! */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index 91fefc4..4a98545 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -60,7 +60,6 @@
 #else
 #define CONFIG_BAUDRATE		9600	/* ... at 115200 bps */
 #endif
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index ea282a6..dc5ec3a 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -117,7 +117,6 @@
 #define CONFIG_SERIAL_MULTI
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h
index e7a8c41..59b45c8 100644
--- a/include/configs/rsk7203.h
+++ b/include/configs/rsk7203.h
@@ -63,7 +63,6 @@
 /* Buffer size for Boot Arguments passed to kernel */
 #define CONFIG_SYS_BARGSIZE	512
 /* List of legal baudrate settings for this board */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
 
 /* SCIF */
diff --git a/include/configs/rsk7264.h b/include/configs/rsk7264.h
index 3a25b30..af9524e 100644
--- a/include/configs/rsk7264.h
+++ b/include/configs/rsk7264.h
@@ -26,7 +26,6 @@
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_BOOTARGS		"console=ttySC3,115200"
 #define CONFIG_BOOTDELAY	3
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
 
 #define CONFIG_SYS_LONGHELP	1	/* undef to save memory	*/
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index 2d74235..cab6660 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -158,7 +158,6 @@
 #define CONFIG_SYS_BASE_BAUD		691200
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE					\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,	\
 	 57600, 115200, 230400, 460800, 921600 }
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index b616456..2d6e51d 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -235,7 +235,6 @@
 #define CONFIG_SYS_BASE_BAUD		921600	/* internal clock */
 
 /* The following table includes the supported baudrates */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h
index 7c3a948..73d2a87 100644
--- a/include/configs/sh7757lcr.h
+++ b/include/configs/sh7757lcr.h
@@ -73,7 +73,6 @@
 #define CONFIG_SYS_PBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_BARGSIZE		512
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
 
 /* SCIF */
diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h
index 0a8df7f..59728f5 100644
--- a/include/configs/sh7763rdp.h
+++ b/include/configs/sh7763rdp.h
@@ -65,7 +65,6 @@
 #define CONFIG_SYS_MAXARGS		16	/* max args accepted for monitor commands */
 #define CONFIG_SYS_BARGSIZE	512	/* Buffer size for Boot Arguments
 								passed to kernel */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate
 												settings for this board */
 
diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h
index e94f913..1e71bcc 100644
--- a/include/configs/sh7785lcr.h
+++ b/include/configs/sh7785lcr.h
@@ -87,7 +87,6 @@
 #define CONFIG_SYS_PBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_BARGSIZE		512
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
 
 /* SCIF */
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index 3c8b24c..fe40bf0 100644
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -46,7 +46,6 @@
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC */
 
 #define CONFIG_BAUDRATE		115200	    /* ... at 115200 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* PCI */
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index a958fd0..f27466c 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -48,7 +48,6 @@
  */
 #define CONFIG_PSC_CONSOLE	6	/* console is on PSC6 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #ifdef CONFIG_STK52XX
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 84a5f9d..47bb846 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -54,7 +54,6 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h
index e2173de..bd7bac0 100644
--- a/include/configs/xilinx-ppc.h
+++ b/include/configs/xilinx-ppc.h
@@ -121,7 +121,6 @@
 #define CONFIG_XILINX_UARTLITE
 #define CONFIG_SERIAL_BASE		XPAR_UARTLITE_0_BASEADDR
 #define CONFIG_BAUDRATE			XPAR_UARTLITE_0_BAUDRATE
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
 #else
 #ifdef XPAR_UARTNS550_0_BASEADDR
@@ -132,7 +131,6 @@
 #define CONFIG_SYS_NS16550_COM1		XPAR_UARTNS550_0_BASEADDR
 #define CONFIG_SYS_NS16550_CLK		XPAR_UARTNS550_0_CLOCK_FREQ_HZ
 #define CONFIG_BAUDRATE			115200
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 115200 }
 #endif
 #endif
diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h
index e686891..d72921e 100644
--- a/include/configs/xpedite1000.h
+++ b/include/configs/xpedite1000.h
@@ -118,7 +118,6 @@ extern void out32(unsigned int, unsigned long);
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
 #define CONFIG_BAUDRATE			115200
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index 6535ea2..63279b0 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -133,7 +133,6 @@
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_SERIAL_MULTI
 
-#undef CONFIG_SYS_BAUDRATE_TABLE
 #define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
diff --git a/mkconfig b/mkconfig
index 438530b..daa1810 100755
--- a/mkconfig
+++ b/mkconfig
@@ -167,6 +167,7 @@ cat << EOF >> config.h
 #include <config_defaults.h>
 #include <configs/${CONFIG_NAME}.h>
 #include <asm/config.h>
+#include <config_fallbacks.h>
 EOF
 
 exit 0
-- 
1.7.0.4

^ permalink raw reply related	[flat|nested] 25+ messages in thread
end of thread, other threads:[~2012-06-20 18:36 UTC | newest]

Thread overview: 25+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-04-26 22:46 [U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Tom Rini
2012-04-26 22:46 ` [U-Boot] [PATCH v2 2/2] hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c Tom Rini
2012-04-27  5:35   ` Mike Frysinger
2012-04-29 15:13   ` Stefano Babic
2012-04-26 23:53 ` [U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Tom Rini
2012-04-27  5:34 ` Mike Frysinger
2012-04-27 14:31   ` Tom Rini
2012-04-27  6:31 ` Wolfgang Denk
2012-04-27 14:53   ` Tom Rini
2012-04-27 16:17     ` Wolfgang Denk
2012-04-27 16:47       ` Tom Rini
2012-04-27 17:19         ` Wolfgang Denk
2012-04-27 17:31           ` Tom Rini
2012-04-27 18:03   ` Tom Rini
2012-04-27 18:37     ` Mike Frysinger
2012-04-27 18:40     ` Wolfgang Denk
2012-04-27 19:02       ` Tom Rini
2012-06-19 20:50 ` Wolfgang Denk
2012-06-19 21:31   ` Tom Rini
2012-06-20 14:52   ` Tom Rini
2012-06-19 22:54 ` [U-Boot] [PATCH v4 " Tom Rini
2012-06-19 22:54   ` [U-Boot] [PATCH v4 2/2] hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c Tom Rini
2012-06-20  9:14     ` Stefano Babic
2012-06-20 18:36     ` Wolfgang Denk
2012-06-20 18:36   ` [U-Boot] [PATCH v4 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Wolfgang Denk

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.